//===-- llvm/CodeGen/ISDOpcodes.h - CodeGen opcodes -------------*- C++ -*-===// // // The LLVM Compiler Infrastructure // // This file is distributed under the University of Illinois Open Source // License. See LICENSE.TXT for details. // //===----------------------------------------------------------------------===// // // This file declares codegen opcodes and related utilities. // //===----------------------------------------------------------------------===// #ifndef LLVM_CODEGEN_ISDOPCODES_H #define LLVM_CODEGEN_ISDOPCODES_H namespace llvm { /// ISD namespace - This namespace contains an enum which represents all of the /// SelectionDAG node types and value types. /// namespace ISD { //===--------------------------------------------------------------------===// /// ISD::NodeType enum - This enum defines the target-independent operators /// for a SelectionDAG. /// /// Targets may also define target-dependent operator codes for SDNodes. For /// example, on x86, these are the enum values in the X86ISD namespace. /// Targets should aim to use target-independent operators to model their /// instruction sets as much as possible, and only use target-dependent /// operators when they have special requirements. /// /// Finally, during and after selection proper, SNodes may use special /// operator codes that correspond directly with MachineInstr opcodes. These /// are used to represent selected instructions. See the isMachineOpcode() /// and getMachineOpcode() member functions of SDNode. /// enum NodeType { /// DELETED_NODE - This is an illegal value that is used to catch /// errors. This opcode is not a legal opcode for any node. DELETED_NODE, /// EntryToken - This is the marker used to indicate the start of a region. EntryToken, /// TokenFactor - This node takes multiple tokens as input and produces a /// single token result. This is used to represent the fact that the operand /// operators are independent of each other. TokenFactor, /// AssertSext, AssertZext - These nodes record if a register contains a /// value that has already been zero or sign extended from a narrower type. /// These nodes take two operands. The first is the node that has already /// been extended, and the second is a value type node indicating the width /// of the extension AssertSext, AssertZext, /// Various leaf nodes. BasicBlock, VALUETYPE, CONDCODE, Register, RegisterMask, Constant, ConstantFP, GlobalAddress, GlobalTLSAddress, FrameIndex, JumpTable, ConstantPool, ExternalSymbol, BlockAddress, /// The address of the GOT GLOBAL_OFFSET_TABLE, /// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and /// llvm.returnaddress on the DAG. These nodes take one operand, the index /// of the frame or return address to return. An index of zero corresponds /// to the current function's frame or return address, an index of one to /// the parent's frame or return address, and so on. FRAMEADDR, RETURNADDR, /// FRAME_ALLOC_RECOVER - Represents the llvm.framerecover /// intrinsic. Materializes the offset from the frame pointer of another /// function to the result of llvm.frameallocate. FRAME_ALLOC_RECOVER, /// READ_REGISTER, WRITE_REGISTER - This node represents llvm.register on /// the DAG, which implements the named register global variables extension. READ_REGISTER, WRITE_REGISTER, /// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to /// first (possible) on-stack argument. This is needed for correct stack /// adjustment during unwind. FRAME_TO_ARGS_OFFSET, /// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents /// 'eh_return' gcc dwarf builtin, which is used to return from /// exception. The general meaning is: adjust stack by OFFSET and pass /// execution to HANDLER. Many platform-related details also :) EH_RETURN, /// RESULT, OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer) /// This corresponds to the eh.sjlj.setjmp intrinsic. /// It takes an input chain and a pointer to the jump buffer as inputs /// and returns an outchain. EH_SJLJ_SETJMP, /// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer) /// This corresponds to the eh.sjlj.longjmp intrinsic. /// It takes an input chain and a pointer to the jump buffer as inputs /// and returns an outchain. EH_SJLJ_LONGJMP, /// TargetConstant* - Like Constant*, but the DAG does not do any folding, /// simplification, or lowering of the constant. They are used for constants /// which are known to fit in the immediate fields of their users, or for /// carrying magic numbers which are not values which need to be /// materialized in registers. TargetConstant, TargetConstantFP, /// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or /// anything else with this node, and this is valid in the target-specific /// dag, turning into a GlobalAddress operand. TargetGlobalAddress, TargetGlobalTLSAddress, TargetFrameIndex, TargetJumpTable, TargetConstantPool, TargetExternalSymbol, TargetBlockAddress, /// TargetIndex - Like a constant pool entry, but with completely /// target-dependent semantics. Holds target flags, a 32-bit index, and a /// 64-bit index. Targets can use this however they like. TargetIndex, /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...) /// This node represents a target intrinsic function with no side effects. /// The first operand is the ID number of the intrinsic from the /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The /// node returns the result of the intrinsic. INTRINSIC_WO_CHAIN, /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...) /// This node represents a target intrinsic function with side effects that /// returns a result. The first operand is a chain pointer. The second is /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The /// operands to the intrinsic follow. The node has two results, the result /// of the intrinsic and an output chain. INTRINSIC_W_CHAIN, /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...) /// This node represents a target intrinsic function with side effects that /// does not return a result. The first operand is a chain pointer. The /// second is the ID number of the intrinsic from the llvm::Intrinsic /// namespace. The operands to the intrinsic follow. INTRINSIC_VOID, /// CopyToReg - This node has three operands: a chain, a register number to /// set to this value, and a value. CopyToReg, /// CopyFromReg - This node indicates that the input value is a virtual or /// physical register that is defined outside of the scope of this /// SelectionDAG. The register is available from the RegisterSDNode object. CopyFromReg, /// UNDEF - An undefined node. UNDEF, /// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by /// a Constant, which is required to be operand #1) half of the integer or /// float value specified as operand #0. This is only for use before /// legalization, for values that will be broken into multiple registers. EXTRACT_ELEMENT, /// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. /// Given two values of the same integer value type, this produces a value /// twice as big. Like EXTRACT_ELEMENT, this can only be used before /// legalization. BUILD_PAIR, /// MERGE_VALUES - This node takes multiple discrete operands and returns /// them all as its individual results. This nodes has exactly the same /// number of inputs and outputs. This node is useful for some pieces of the /// code generator that want to think about a single node with multiple /// results, not multiple nodes. MERGE_VALUES, /// Simple integer binary arithmetic operators. ADD, SUB, MUL, SDIV, UDIV, SREM, UREM, /// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing /// a signed/unsigned value of type i[2*N], and return the full value as /// two results, each of type iN. SMUL_LOHI, UMUL_LOHI, /// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and /// remainder result. SDIVREM, UDIVREM, /// CARRY_FALSE - This node is used when folding other nodes, /// like ADDC/SUBC, which indicate the carry result is always false. CARRY_FALSE, /// Carry-setting nodes for multiple precision addition and subtraction. /// These nodes take two operands of the same value type, and produce two /// results. The first result is the normal add or sub result, the second /// result is the carry flag result. ADDC, SUBC, /// Carry-using nodes for multiple precision addition and subtraction. These /// nodes take three operands: The first two are the normal lhs and rhs to /// the add or sub, and the third is the input carry flag. These nodes /// produce two results; the normal result of the add or sub, and the output /// carry flag. These nodes both read and write a carry flag to allow them /// to them to be chained together for add and sub of arbitrarily large /// values. ADDE, SUBE, /// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition. /// These nodes take two operands: the normal LHS and RHS to the add. They /// produce two results: the normal result of the add, and a boolean that /// indicates if an overflow occurred (*not* a flag, because it may be store /// to memory, etc.). If the type of the boolean is not i1 then the high /// bits conform to getBooleanContents. /// These nodes are generated from llvm.[su]add.with.overflow intrinsics. SADDO, UADDO, /// Same for subtraction. SSUBO, USUBO, /// Same for multiplication. SMULO, UMULO, /// Simple binary floating point operators. FADD, FSUB, FMUL, FDIV, FREM, /// FMA - Perform a * b + c with no intermediate rounding step. FMA, /// FMAD - Perform a * b + c, while getting the same result as the /// separately rounded operations. FMAD, /// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This /// DAG node does not require that X and Y have the same type, just that the /// are both floating point. X and the result must have the same type. /// FCOPYSIGN(f32, f64) is allowed. FCOPYSIGN, /// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point /// value as an integer 0/1 value. FGETSIGN, /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the /// specified, possibly variable, elements. The number of elements is /// required to be a power of two. The types of the operands must all be /// the same and must match the vector element type, except that integer /// types are allowed to be larger than the element type, in which case /// the operands are implicitly truncated. BUILD_VECTOR, /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element /// at IDX replaced with VAL. If the type of VAL is larger than the vector /// element type then VAL is truncated before replacement. INSERT_VECTOR_ELT, /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR /// identified by the (potentially variable) element number IDX. If the /// return type is an integer type larger than the element type of the /// vector, the result is extended to the width of the return type. EXTRACT_VECTOR_ELT, /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of /// vector type with the same length and element type, this produces a /// concatenated vector result value, with length equal to the sum of the /// lengths of the input vectors. CONCAT_VECTORS, /// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector /// with VECTOR2 inserted into VECTOR1 at the (potentially /// variable) element number IDX, which must be a multiple of the /// VECTOR2 vector length. The elements of VECTOR1 starting at /// IDX are overwritten with VECTOR2. Elements IDX through /// vector_length(VECTOR2) must be valid VECTOR1 indices. INSERT_SUBVECTOR, /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an /// vector value) starting with the element number IDX, which must be a /// constant multiple of the result vector length. EXTRACT_SUBVECTOR, /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int /// values that indicate which value (or undef) each result element will /// get. These constant ints are accessible through the /// ShuffleVectorSDNode class. This is quite similar to the Altivec /// 'vperm' instruction, except that the indices must be constants and are /// in terms of the element size of VEC1/VEC2, not in terms of bytes. VECTOR_SHUFFLE, /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a /// scalar value into element 0 of the resultant vector type. The top /// elements 1 to N-1 of the N-element vector are undefined. The type /// of the operand must match the vector element type, except when they /// are integer types. In this case the operand is allowed to be wider /// than the vector element type, and is implicitly truncated to it. SCALAR_TO_VECTOR, /// MULHU/MULHS - Multiply high - Multiply two integers of type iN, /// producing an unsigned/signed value of type i[2*N], then return the top /// part. MULHU, MULHS, /// Bitwise operators - logical and, logical or, logical xor. AND, OR, XOR, /// Shift and rotation operations. After legalization, the type of the /// shift amount is known to be TLI.getShiftAmountTy(). Before legalization /// the shift amount can be any type, but care must be taken to ensure it is /// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before /// legalization, types like i1024 can occur and i8 doesn't have enough bits /// to represent the shift amount. /// When the 1st operand is a vector, the shift amount must be in the same /// type. (TLI.getShiftAmountTy() will return the same type when the input /// type is a vector.) SHL, SRA, SRL, ROTL, ROTR, /// Byte Swap and Counting operators. BSWAP, CTTZ, CTLZ, CTPOP, /// Bit counting operators with an undefined result for zero inputs. CTTZ_ZERO_UNDEF, CTLZ_ZERO_UNDEF, /// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not /// i1 then the high bits must conform to getBooleanContents. SELECT, /// Select with a vector condition (op #0) and two vector operands (ops #1 /// and #2), returning a vector result. All vectors have the same length. /// Much like the scalar select and setcc, each bit in the condition selects /// whether the corresponding result element is taken from op #1 or op #2. /// At first, the VSELECT condition is of vXi1 type. Later, targets may /// change the condition type in order to match the VSELECT node using a /// pattern. The condition follows the BooleanContent format of the target. VSELECT, /// Select with condition operator - This selects between a true value and /// a false value (ops #2 and #3) based on the boolean result of comparing /// the lhs and rhs (ops #0 and #1) of a conditional expression with the /// condition code in op #4, a CondCodeSDNode. SELECT_CC, /// SetCC operator - This evaluates to a true value iff the condition is /// true. If the result value type is not i1 then the high bits conform /// to getBooleanContents. The operands to this are the left and right /// operands to compare (ops #0, and #1) and the condition code to compare /// them with (op #2) as a CondCodeSDNode. If the operands are vector types /// then the result type must also be a vector type. SETCC, /// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded /// integer shift operations, just like ADD/SUB_PARTS. The operation /// ordering is: /// [Lo,Hi] = op [LoLHS,HiLHS], Amt SHL_PARTS, SRA_PARTS, SRL_PARTS, /// Conversion operators. These are all single input single output /// operations. For all of these, the result type must be strictly /// wider or narrower (depending on the operation) than the source /// type. /// SIGN_EXTEND - Used for integer types, replicating the sign bit /// into new bits. SIGN_EXTEND, /// ZERO_EXTEND - Used for integer types, zeroing the new bits. ZERO_EXTEND, /// ANY_EXTEND - Used for integer types. The high bits are undefined. ANY_EXTEND, /// TRUNCATE - Completely drop the high bits. TRUNCATE, /// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign /// depends on the first letter) to floating point. SINT_TO_FP, UINT_TO_FP, /// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to /// sign extend a small value in a large integer register (e.g. sign /// extending the low 8 bits of a 32-bit register to fill the top 24 bits /// with the 7th bit). The size of the smaller type is indicated by the 1th /// operand, a ValueType node. SIGN_EXTEND_INREG, /// ANY_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register any-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type and the result type match. Each of the low operand /// elements is any-extended into the corresponding, wider result /// elements with the high bits becoming undef. ANY_EXTEND_VECTOR_INREG, /// SIGN_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register sign-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type and the result type match. Each of the low operand /// elements is sign-extended into the corresponding, wider result /// elements. // FIXME: The SIGN_EXTEND_INREG node isn't specifically limited to // scalars, but it also doesn't handle vectors well. Either it should be // restricted to scalars or this node (and its handling) should be merged // into it. SIGN_EXTEND_VECTOR_INREG, /// ZERO_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// in-register zero-extension of the low lanes of an integer vector. The /// result type must have fewer elements than the operand type, and those /// elements must be larger integer types such that the total size of the /// operand type and the result type match. Each of the low operand /// elements is zero-extended into the corresponding, wider result /// elements. ZERO_EXTEND_VECTOR_INREG, /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned /// integer. FP_TO_SINT, FP_TO_UINT, /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type /// down to the precision of the destination VT. TRUNC is a flag, which is /// always an integer that is zero or one. If TRUNC is 0, this is a /// normal rounding, if it is 1, this FP_ROUND is known to not change the /// value of Y. /// /// The TRUNC = 1 case is used in cases where we know that the value will /// not be modified by the node, because Y is not using any of the extra /// precision of source type. This allows certain transformations like /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed. FP_ROUND, /// FLT_ROUNDS_ - Returns current rounding mode: /// -1 Undefined /// 0 Round to 0 /// 1 Round to nearest /// 2 Round to +inf /// 3 Round to -inf FLT_ROUNDS_, /// X = FP_ROUND_INREG(Y, VT) - This operator takes an FP register, and /// rounds it to a floating point value. It then promotes it and returns it /// in a register of the same size. This operation effectively just /// discards excess precision. The type to round down to is specified by /// the VT operand, a VTSDNode. FP_ROUND_INREG, /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type. FP_EXTEND, /// BITCAST - This operator converts between integer, vector and FP /// values, as if the value was stored to memory with one type and loaded /// from the same address with the other type (or equivalently for vector /// format conversions, etc). The source and result are required to have /// the same bit size (e.g. f32 <-> i32). This can also be used for /// int-to-int or fp-to-fp conversions, but that is a noop, deleted by /// getNode(). BITCAST, /// ADDRSPACECAST - This operator converts between pointers of different /// address spaces. ADDRSPACECAST, /// CONVERT_RNDSAT - This operator is used to support various conversions /// between various types (float, signed, unsigned and vectors of those /// types) with rounding and saturation. NOTE: Avoid using this operator as /// most target don't support it and the operator might be removed in the /// future. It takes the following arguments: /// 0) value /// 1) dest type (type to convert to) /// 2) src type (type to convert from) /// 3) rounding imm /// 4) saturation imm /// 5) ISD::CvtCode indicating the type of conversion to do CONVERT_RNDSAT, /// FP16_TO_FP, FP_TO_FP16 - These operators are used to perform promotions /// and truncation for half-precision (16 bit) floating numbers. These nodes /// form a semi-softened interface for dealing with f16 (as an i16), which /// is often a storage-only type but has native conversions. FP16_TO_FP, FP_TO_FP16, /// FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW, /// FLOG, FLOG2, FLOG10, FEXP, FEXP2, /// FCEIL, FTRUNC, FRINT, FNEARBYINT, FROUND, FFLOOR - Perform various unary /// floating point operations. These are inspired by libm. FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW, FLOG, FLOG2, FLOG10, FEXP, FEXP2, FCEIL, FTRUNC, FRINT, FNEARBYINT, FROUND, FFLOOR, FMINNUM, FMAXNUM, /// FSINCOS - Compute both fsin and fcos as a single operation. FSINCOS, /// LOAD and STORE have token chains as their first operand, then the same /// operands as an LLVM load/store instruction, then an offset node that /// is added / subtracted from the base pointer to form the address (for /// indexed memory ops). LOAD, STORE, /// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned /// to a specified boundary. This node always has two return values: a new /// stack pointer value and a chain. The first operand is the token chain, /// the second is the number of bytes to allocate, and the third is the /// alignment boundary. The size is guaranteed to be a multiple of the /// stack alignment, and the alignment is guaranteed to be bigger than the /// stack alignment (if required) or 0 to get standard stack alignment. DYNAMIC_STACKALLOC, /// Control flow instructions. These all have token chains. /// BR - Unconditional branch. The first operand is the chain /// operand, the second is the MBB to branch to. BR, /// BRIND - Indirect branch. The first operand is the chain, the second /// is the value to branch to, which must be of the same type as the /// target's pointer type. BRIND, /// BR_JT - Jumptable branch. The first operand is the chain, the second /// is the jumptable index, the last one is the jumptable entry index. BR_JT, /// BRCOND - Conditional branch. The first operand is the chain, the /// second is the condition, the third is the block to branch to if the /// condition is true. If the type of the condition is not i1, then the /// high bits must conform to getBooleanContents. BRCOND, /// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in /// that the condition is represented as condition code, and two nodes to /// compare, rather than as a combined SetCC node. The operands in order /// are chain, cc, lhs, rhs, block to branch to if condition is true. BR_CC, /// INLINEASM - Represents an inline asm block. This node always has two /// return values: a chain and a flag result. The inputs are as follows: /// Operand #0 : Input chain. /// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string. /// Operand #2 : a MDNodeSDNode with the !srcloc metadata. /// Operand #3 : HasSideEffect, IsAlignStack bits. /// After this, it is followed by a list of operands with this format: /// ConstantSDNode: Flags that encode whether it is a mem or not, the /// of operands that follow, etc. See InlineAsm.h. /// ... however many operands ... /// Operand #last: Optional, an incoming flag. /// /// The variable width operands are required to represent target addressing /// modes as a single "operand", even though they may have multiple /// SDOperands. INLINEASM, /// EH_LABEL - Represents a label in mid basic block used to track /// locations needed for debug and exception handling tables. These nodes /// take a chain as input and return a chain. EH_LABEL, /// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a /// value, the same type as the pointer type for the system, and an output /// chain. STACKSAVE, /// STACKRESTORE has two operands, an input chain and a pointer to restore /// to it returns an output chain. STACKRESTORE, /// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end /// of a call sequence, and carry arbitrary information that target might /// want to know. The first operand is a chain, the rest are specified by /// the target and not touched by the DAG optimizers. /// CALLSEQ_START..CALLSEQ_END pairs may not be nested. CALLSEQ_START, // Beginning of a call sequence CALLSEQ_END, // End of a call sequence /// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE, /// and the alignment. It returns a pair of values: the vaarg value and a /// new chain. VAARG, /// VACOPY - VACOPY has 5 operands: an input chain, a destination pointer, /// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the /// source. VACOPY, /// VAEND, VASTART - VAEND and VASTART have three operands: an input chain, /// pointer, and a SRCVALUE. VAEND, VASTART, /// SRCVALUE - This is a node type that holds a Value* that is used to /// make reference to a value in the LLVM IR. SRCVALUE, /// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to /// reference metadata in the IR. MDNODE_SDNODE, /// PCMARKER - This corresponds to the pcmarker intrinsic. PCMARKER, /// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic. /// The only operand is a chain and a value and a chain are produced. The /// value is the contents of the architecture specific cycle counter like /// register (or other high accuracy low latency clock source) READCYCLECOUNTER, /// HANDLENODE node - Used as a handle for various purposes. HANDLENODE, /// INIT_TRAMPOLINE - This corresponds to the init_trampoline intrinsic. It /// takes as input a token chain, the pointer to the trampoline, the pointer /// to the nested function, the pointer to pass for the 'nest' parameter, a /// SRCVALUE for the trampoline and another for the nested function /// (allowing targets to access the original Function*). /// It produces a token chain as output. INIT_TRAMPOLINE, /// ADJUST_TRAMPOLINE - This corresponds to the adjust_trampoline intrinsic. /// It takes a pointer to the trampoline and produces a (possibly) new /// pointer to the same trampoline with platform-specific adjustments /// applied. The pointer it returns points to an executable block of code. ADJUST_TRAMPOLINE, /// TRAP - Trapping instruction TRAP, /// DEBUGTRAP - Trap intended to get the attention of a debugger. DEBUGTRAP, /// PREFETCH - This corresponds to a prefetch intrinsic. The first operand /// is the chain. The other operands are the address to prefetch, /// read / write specifier, locality specifier and instruction / data cache /// specifier. PREFETCH, /// OUTCHAIN = ATOMIC_FENCE(INCHAIN, ordering, scope) /// This corresponds to the fence instruction. It takes an input chain, and /// two integer constants: an AtomicOrdering and a SynchronizationScope. ATOMIC_FENCE, /// Val, OUTCHAIN = ATOMIC_LOAD(INCHAIN, ptr) /// This corresponds to "load atomic" instruction. ATOMIC_LOAD, /// OUTCHAIN = ATOMIC_STORE(INCHAIN, ptr, val) /// This corresponds to "store atomic" instruction. ATOMIC_STORE, /// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap) /// For double-word atomic operations: /// ValLo, ValHi, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmpLo, cmpHi, /// swapLo, swapHi) /// This corresponds to the cmpxchg instruction. ATOMIC_CMP_SWAP, /// Val, Success, OUTCHAIN /// = ATOMIC_CMP_SWAP_WITH_SUCCESS(INCHAIN, ptr, cmp, swap) /// N.b. this is still a strong cmpxchg operation, so /// Success == "Val == cmp". ATOMIC_CMP_SWAP_WITH_SUCCESS, /// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt) /// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt) /// For double-word atomic operations: /// ValLo, ValHi, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amtLo, amtHi) /// ValLo, ValHi, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amtLo, amtHi) /// These correspond to the atomicrmw instruction. ATOMIC_SWAP, ATOMIC_LOAD_ADD, ATOMIC_LOAD_SUB, ATOMIC_LOAD_AND, ATOMIC_LOAD_OR, ATOMIC_LOAD_XOR, ATOMIC_LOAD_NAND, ATOMIC_LOAD_MIN, ATOMIC_LOAD_MAX, ATOMIC_LOAD_UMIN, ATOMIC_LOAD_UMAX, // Masked load and store MLOAD, MSTORE, /// This corresponds to the llvm.lifetime.* intrinsics. The first operand /// is the chain and the second operand is the alloca pointer. LIFETIME_START, LIFETIME_END, /// BUILTIN_OP_END - This must be the last enum value in this list. /// The target-specific pre-isel opcode values start here. BUILTIN_OP_END }; /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations /// which do not reference a specific memory location should be less than /// this value. Those that do must not be less than this value, and can /// be used with SelectionDAG::getMemIntrinsicNode. static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END+200; //===--------------------------------------------------------------------===// /// MemIndexedMode enum - This enum defines the load / store indexed /// addressing modes. /// /// UNINDEXED "Normal" load / store. The effective address is already /// computed and is available in the base pointer. The offset /// operand is always undefined. In addition to producing a /// chain, an unindexed load produces one value (result of the /// load); an unindexed store does not produce a value. /// /// PRE_INC Similar to the unindexed mode where the effective address is /// PRE_DEC the value of the base pointer add / subtract the offset. /// It considers the computation as being folded into the load / /// store operation (i.e. the load / store does the address /// computation as well as performing the memory transaction). /// The base operand is always undefined. In addition to /// producing a chain, pre-indexed load produces two values /// (result of the load and the result of the address /// computation); a pre-indexed store produces one value (result /// of the address computation). /// /// POST_INC The effective address is the value of the base pointer. The /// POST_DEC value of the offset operand is then added to / subtracted /// from the base after memory transaction. In addition to /// producing a chain, post-indexed load produces two values /// (the result of the load and the result of the base +/- offset /// computation); a post-indexed store produces one value (the /// the result of the base +/- offset computation). enum MemIndexedMode { UNINDEXED = 0, PRE_INC, PRE_DEC, POST_INC, POST_DEC, LAST_INDEXED_MODE }; //===--------------------------------------------------------------------===// /// LoadExtType enum - This enum defines the three variants of LOADEXT /// (load with extension). /// /// SEXTLOAD loads the integer operand and sign extends it to a larger /// integer result type. /// ZEXTLOAD loads the integer operand and zero extends it to a larger /// integer result type. /// EXTLOAD is used for two things: floating point extending loads and /// integer extending loads [the top bits are undefined]. enum LoadExtType { NON_EXTLOAD = 0, EXTLOAD, SEXTLOAD, ZEXTLOAD, LAST_LOADEXT_TYPE }; NodeType getExtForLoadExtType(bool IsFP, LoadExtType); //===--------------------------------------------------------------------===// /// ISD::CondCode enum - These are ordered carefully to make the bitfields /// below work out, when considering SETFALSE (something that never exists /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal /// to. If the "N" column is 1, the result of the comparison is undefined if /// the input is a NAN. /// /// All of these (except for the 'always folded ops') should be handled for /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT, /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used. /// /// Note that these are laid out in a specific order to allow bit-twiddling /// to transform conditions. enum CondCode { // Opcode N U L G E Intuitive operation SETFALSE, // 0 0 0 0 Always false (always folded) SETOEQ, // 0 0 0 1 True if ordered and equal SETOGT, // 0 0 1 0 True if ordered and greater than SETOGE, // 0 0 1 1 True if ordered and greater than or equal SETOLT, // 0 1 0 0 True if ordered and less than SETOLE, // 0 1 0 1 True if ordered and less than or equal SETONE, // 0 1 1 0 True if ordered and operands are unequal SETO, // 0 1 1 1 True if ordered (no nans) SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y) SETUEQ, // 1 0 0 1 True if unordered or equal SETUGT, // 1 0 1 0 True if unordered or greater than SETUGE, // 1 0 1 1 True if unordered, greater than, or equal SETULT, // 1 1 0 0 True if unordered or less than SETULE, // 1 1 0 1 True if unordered, less than, or equal SETUNE, // 1 1 1 0 True if unordered or not equal SETTRUE, // 1 1 1 1 Always true (always folded) // Don't care operations: undefined if the input is a nan. SETFALSE2, // 1 X 0 0 0 Always false (always folded) SETEQ, // 1 X 0 0 1 True if equal SETGT, // 1 X 0 1 0 True if greater than SETGE, // 1 X 0 1 1 True if greater than or equal SETLT, // 1 X 1 0 0 True if less than SETLE, // 1 X 1 0 1 True if less than or equal SETNE, // 1 X 1 1 0 True if not equal SETTRUE2, // 1 X 1 1 1 Always true (always folded) SETCC_INVALID // Marker value. }; /// isSignedIntSetCC - Return true if this is a setcc instruction that /// performs a signed comparison when used with integer operands. inline bool isSignedIntSetCC(CondCode Code) { return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE; } /// isUnsignedIntSetCC - Return true if this is a setcc instruction that /// performs an unsigned comparison when used with integer operands. inline bool isUnsignedIntSetCC(CondCode Code) { return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE; } /// isTrueWhenEqual - Return true if the specified condition returns true if /// the two operands to the condition are equal. Note that if one of the two /// operands is a NaN, this value is meaningless. inline bool isTrueWhenEqual(CondCode Cond) { return ((int)Cond & 1) != 0; } /// getUnorderedFlavor - This function returns 0 if the condition is always /// false if an operand is a NaN, 1 if the condition is always true if the /// operand is a NaN, and 2 if the condition is undefined if the operand is a /// NaN. inline unsigned getUnorderedFlavor(CondCode Cond) { return ((int)Cond >> 3) & 3; } /// getSetCCInverse - Return the operation corresponding to !(X op Y), where /// 'op' is a valid SetCC operation. CondCode getSetCCInverse(CondCode Operation, bool isInteger); /// getSetCCSwappedOperands - Return the operation corresponding to (Y op X) /// when given the operation for (X op Y). CondCode getSetCCSwappedOperands(CondCode Operation); /// getSetCCOrOperation - Return the result of a logical OR between different /// comparisons of identical values: ((X op1 Y) | (X op2 Y)). This /// function returns SETCC_INVALID if it is not possible to represent the /// resultant comparison. CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, bool isInteger); /// getSetCCAndOperation - Return the result of a logical AND between /// different comparisons of identical values: ((X op1 Y) & (X op2 Y)). This /// function returns SETCC_INVALID if it is not possible to represent the /// resultant comparison. CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger); //===--------------------------------------------------------------------===// /// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT /// supports. enum CvtCode { CVT_FF, /// Float from Float CVT_FS, /// Float from Signed CVT_FU, /// Float from Unsigned CVT_SF, /// Signed from Float CVT_UF, /// Unsigned from Float CVT_SS, /// Signed from Signed CVT_SU, /// Signed from Unsigned CVT_US, /// Unsigned from Signed CVT_UU, /// Unsigned from Unsigned CVT_INVALID /// Marker - Invalid opcode }; } // end llvm::ISD namespace } // end llvm namespace #endif