//===-- X86BaseInfo.h - Top level definitions for X86 -------- --*- C++ -*-===// // // The LLVM Compiler Infrastructure // // This file is distributed under the University of Illinois Open Source // License. See LICENSE.TXT for details. // //===----------------------------------------------------------------------===// // // This file contains small standalone helper functions and enum definitions for // the X86 target useful for the compiler back-end and the MC libraries. // As such, it deliberately does not include references to LLVM core // code gen types, passes, etc.. // //===----------------------------------------------------------------------===// #ifndef X86BASEINFO_H #define X86BASEINFO_H #include "X86MCTargetDesc.h" #include "llvm/MC/MCInstrDesc.h" #include "llvm/Support/DataTypes.h" #include "llvm/Support/ErrorHandling.h" namespace llvm { namespace X86 { // Enums for memory operand decoding. Each memory operand is represented with // a 5 operand sequence in the form: // [BaseReg, ScaleAmt, IndexReg, Disp, Segment] // These enums help decode this. enum { AddrBaseReg = 0, AddrScaleAmt = 1, AddrIndexReg = 2, AddrDisp = 3, /// AddrSegmentReg - The operand # of the segment in the memory operand. AddrSegmentReg = 4, /// AddrNumOperands - Total number of operands in a memory reference. AddrNumOperands = 5 }; } // end namespace X86; /// X86II - This namespace holds all of the target specific flags that /// instruction info tracks. /// namespace X86II { /// Target Operand Flag enum. enum TOF { //===------------------------------------------------------------------===// // X86 Specific MachineOperand flags. MO_NO_FLAG, /// MO_GOT_ABSOLUTE_ADDRESS - On a symbol operand, this represents a /// relocation of: /// SYMBOL_LABEL + [. - PICBASELABEL] MO_GOT_ABSOLUTE_ADDRESS, /// MO_PIC_BASE_OFFSET - On a symbol operand this indicates that the /// immediate should get the value of the symbol minus the PIC base label: /// SYMBOL_LABEL - PICBASELABEL MO_PIC_BASE_OFFSET, /// MO_GOT - On a symbol operand this indicates that the immediate is the /// offset to the GOT entry for the symbol name from the base of the GOT. /// /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOT MO_GOT, /// MO_GOTOFF - On a symbol operand this indicates that the immediate is /// the offset to the location of the symbol name from the base of the GOT. /// /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOTOFF MO_GOTOFF, /// MO_GOTPCREL - On a symbol operand this indicates that the immediate is /// offset to the GOT entry for the symbol name from the current code /// location. /// /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @GOTPCREL MO_GOTPCREL, /// MO_PLT - On a symbol operand this indicates that the immediate is /// offset to the PLT entry of symbol name from the current code location. /// /// See the X86-64 ELF ABI supplement for more details. /// SYMBOL_LABEL @PLT MO_PLT, /// MO_TLSGD - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the TLS index structure that contains /// the module number and variable offset for the symbol. Used in the /// general dynamic TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TLSGD MO_TLSGD, /// MO_TLSLD - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the TLS index for the module that /// contains the symbol. When this index is passed to a call to /// __tls_get_addr, the function will return the base address of the TLS /// block for the symbol. Used in the x86-64 local dynamic TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TLSLD MO_TLSLD, /// MO_TLSLDM - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the TLS index for the module that /// contains the symbol. When this index is passed to a call to /// ___tls_get_addr, the function will return the base address of the TLS /// block for the symbol. Used in the IA32 local dynamic TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TLSLDM MO_TLSLDM, /// MO_GOTTPOFF - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the thread-pointer offset for the /// symbol. Used in the x86-64 initial exec TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @GOTTPOFF MO_GOTTPOFF, /// MO_INDNTPOFF - On a symbol operand this indicates that the immediate is /// the absolute address of the GOT entry with the negative thread-pointer /// offset for the symbol. Used in the non-PIC IA32 initial exec TLS access /// model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @INDNTPOFF MO_INDNTPOFF, /// MO_TPOFF - On a symbol operand this indicates that the immediate is /// the thread-pointer offset for the symbol. Used in the x86-64 local /// exec TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @TPOFF MO_TPOFF, /// MO_DTPOFF - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the TLS offset of the symbol. Used /// in the local dynamic TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @DTPOFF MO_DTPOFF, /// MO_NTPOFF - On a symbol operand this indicates that the immediate is /// the negative thread-pointer offset for the symbol. Used in the IA32 /// local exec TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @NTPOFF MO_NTPOFF, /// MO_GOTNTPOFF - On a symbol operand this indicates that the immediate is /// the offset of the GOT entry with the negative thread-pointer offset for /// the symbol. Used in the PIC IA32 initial exec TLS access model. /// /// See 'ELF Handling for Thread-Local Storage' for more details. /// SYMBOL_LABEL @GOTNTPOFF MO_GOTNTPOFF, /// MO_DLLIMPORT - On a symbol operand "FOO", this indicates that the /// reference is actually to the "__imp_FOO" symbol. This is used for /// dllimport linkage on windows. MO_DLLIMPORT, /// MO_DARWIN_STUB - On a symbol operand "FOO", this indicates that the /// reference is actually to the "FOO$stub" symbol. This is used for calls /// and jumps to external functions on Tiger and earlier. MO_DARWIN_STUB, /// MO_DARWIN_NONLAZY - On a symbol operand "FOO", this indicates that the /// reference is actually to the "FOO$non_lazy_ptr" symbol, which is a /// non-PIC-base-relative reference to a non-hidden dyld lazy pointer stub. MO_DARWIN_NONLAZY, /// MO_DARWIN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this indicates /// that the reference is actually to "FOO$non_lazy_ptr - PICBASE", which is /// a PIC-base-relative reference to a non-hidden dyld lazy pointer stub. MO_DARWIN_NONLAZY_PIC_BASE, /// MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE - On a symbol operand "FOO", this /// indicates that the reference is actually to "FOO$non_lazy_ptr -PICBASE", /// which is a PIC-base-relative reference to a hidden dyld lazy pointer /// stub. MO_DARWIN_HIDDEN_NONLAZY_PIC_BASE, /// MO_TLVP - On a symbol operand this indicates that the immediate is /// some TLS offset. /// /// This is the TLS offset for the Darwin TLS mechanism. MO_TLVP, /// MO_TLVP_PIC_BASE - On a symbol operand this indicates that the immediate /// is some TLS offset from the picbase. /// /// This is the 32-bit TLS offset for Darwin TLS in PIC mode. MO_TLVP_PIC_BASE, /// MO_SECREL - On a symbol operand this indicates that the immediate is /// the offset from beginning of section. /// /// This is the TLS offset for the COFF/Windows TLS mechanism. MO_SECREL }; enum { //===------------------------------------------------------------------===// // Instruction encodings. These are the standard/most common forms for X86 // instructions. // // PseudoFrm - This represents an instruction that is a pseudo instruction // or one that has not been implemented yet. It is illegal to code generate // it, but tolerated for intermediate implementation stages. Pseudo = 0, /// Raw - This form is for instructions that don't have any operands, so /// they are just a fixed opcode value, like 'leave'. RawFrm = 1, /// AddRegFrm - This form is used for instructions like 'push r32' that have /// their one register operand added to their opcode. AddRegFrm = 2, /// MRMDestReg - This form is used for instructions that use the Mod/RM byte /// to specify a destination, which in this case is a register. /// MRMDestReg = 3, /// MRMDestMem - This form is used for instructions that use the Mod/RM byte /// to specify a destination, which in this case is memory. /// MRMDestMem = 4, /// MRMSrcReg - This form is used for instructions that use the Mod/RM byte /// to specify a source, which in this case is a register. /// MRMSrcReg = 5, /// MRMSrcMem - This form is used for instructions that use the Mod/RM byte /// to specify a source, which in this case is memory. /// MRMSrcMem = 6, /// RawFrmMemOffs - This form is for instructions that store an absolute /// memory offset as an immediate with a possible segment override. RawFrmMemOffs = 7, /// RawFrmSrc - This form is for instructions that use the source index /// register SI/ESI/RSI with a possible segment override. RawFrmSrc = 8, /// RawFrmDst - This form is for instructions that use the destination index /// register DI/EDI/ESI. RawFrmDst = 9, /// RawFrmSrc - This form is for instructions that use the the source index /// register SI/ESI/ERI with a possible segment override, and also the /// destination index register DI/ESI/RDI. RawFrmDstSrc = 10, /// RawFrmImm8 - This is used for the ENTER instruction, which has two /// immediates, the first of which is a 16-bit immediate (specified by /// the imm encoding) and the second is a 8-bit fixed value. RawFrmImm8 = 11, /// RawFrmImm16 - This is used for CALL FAR instructions, which have two /// immediates, the first of which is a 16 or 32-bit immediate (specified by /// the imm encoding) and the second is a 16-bit fixed value. In the AMD /// manual, this operand is described as pntr16:32 and pntr16:16 RawFrmImm16 = 12, /// MRMX[rm] - The forms are used to represent instructions that use a /// Mod/RM byte, and don't use the middle field for anything. MRMXr = 14, MRMXm = 15, /// MRM[0-7][rm] - These forms are used to represent instructions that use /// a Mod/RM byte, and use the middle field to hold extended opcode /// information. In the intel manual these are represented as /0, /1, ... /// // First, instructions that operate on a register r/m operand... MRM0r = 16, MRM1r = 17, MRM2r = 18, MRM3r = 19, // Format /0 /1 /2 /3 MRM4r = 20, MRM5r = 21, MRM6r = 22, MRM7r = 23, // Format /4 /5 /6 /7 // Next, instructions that operate on a memory r/m operand... MRM0m = 24, MRM1m = 25, MRM2m = 26, MRM3m = 27, // Format /0 /1 /2 /3 MRM4m = 28, MRM5m = 29, MRM6m = 30, MRM7m = 31, // Format /4 /5 /6 /7 //// MRM_XX - A mod/rm byte of exactly 0xXX. MRM_C0 = 32, MRM_C1 = 33, MRM_C2 = 34, MRM_C3 = 35, MRM_C4 = 36, MRM_C8 = 37, MRM_C9 = 38, MRM_CA = 39, MRM_CB = 40, MRM_D0 = 41, MRM_D1 = 42, MRM_D4 = 43, MRM_D5 = 44, MRM_D6 = 45, MRM_D8 = 46, MRM_D9 = 47, MRM_DA = 48, MRM_DB = 49, MRM_DC = 50, MRM_DD = 51, MRM_DE = 52, MRM_DF = 53, MRM_E0 = 54, MRM_E1 = 55, MRM_E2 = 56, MRM_E3 = 57, MRM_E4 = 58, MRM_E5 = 59, MRM_E8 = 60, MRM_E9 = 61, MRM_EA = 62, MRM_EB = 63, MRM_EC = 64, MRM_ED = 65, MRM_EE = 66, MRM_F0 = 67, MRM_F1 = 68, MRM_F2 = 69, MRM_F3 = 70, MRM_F4 = 71, MRM_F5 = 72, MRM_F6 = 73, MRM_F7 = 74, MRM_F8 = 75, MRM_F9 = 76, MRM_FA = 77, MRM_FB = 78, MRM_FC = 79, MRM_FD = 80, MRM_FE = 81, MRM_FF = 82, FormMask = 127, //===------------------------------------------------------------------===// // Actual flags... // OpSize - OpSizeFixed implies instruction never needs a 0x66 prefix. // OpSize16 means this is a 16-bit instruction and needs 0x66 prefix in // 32-bit mode. OpSize32 means this is a 32-bit instruction needs a 0x66 // prefix in 16-bit mode. OpSizeShift = 7, OpSizeMask = 0x3 << OpSizeShift, OpSize16 = 1, OpSize32 = 2, // AsSize - Set if this instruction requires an operand size prefix (0x67), // which most often indicates that the instruction address 16 bit address // instead of 32 bit address (or 32 bit address in 64 bit mode). AdSizeShift = OpSizeShift + 2, AdSize = 1 << AdSizeShift, //===------------------------------------------------------------------===// // OpPrefix - There are several prefix bytes that are used as opcode // extensions. These are 0x66, 0xF3, and 0xF2. If this field is 0 there is // no prefix. // OpPrefixShift = AdSizeShift + 1, OpPrefixMask = 0x7 << OpPrefixShift, // PS, PD - Prefix code for packed single and double precision vector // floating point operations performed in the SSE registers. PS = 1 << OpPrefixShift, PD = 2 << OpPrefixShift, // XS, XD - These prefix codes are for single and double precision scalar // floating point operations performed in the SSE registers. XS = 3 << OpPrefixShift, XD = 4 << OpPrefixShift, //===------------------------------------------------------------------===// // OpMap - This field determines which opcode map this instruction // belongs to. i.e. one-byte, two-byte, 0x0f 0x38, 0x0f 0x3a, etc. // OpMapShift = OpPrefixShift + 3, OpMapMask = 0x7 << OpMapShift, // OB - OneByte - Set if this instruction has a one byte opcode. OB = 0 << OpMapShift, // TB - TwoByte - Set if this instruction has a two byte opcode, which // starts with a 0x0F byte before the real opcode. TB = 1 << OpMapShift, // T8, TA - Prefix after the 0x0F prefix. T8 = 2 << OpMapShift, TA = 3 << OpMapShift, // XOP8 - Prefix to include use of imm byte. XOP8 = 4 << OpMapShift, // XOP9 - Prefix to exclude use of imm byte. XOP9 = 5 << OpMapShift, // XOPA - Prefix to encode 0xA in VEX.MMMM of XOP instructions. XOPA = 6 << OpMapShift, //===------------------------------------------------------------------===// // REX_W - REX prefixes are instruction prefixes used in 64-bit mode. // They are used to specify GPRs and SSE registers, 64-bit operand size, // etc. We only cares about REX.W and REX.R bits and only the former is // statically determined. // REXShift = OpMapShift + 3, REX_W = 1 << REXShift, //===------------------------------------------------------------------===// // This three-bit field describes the size of an immediate operand. Zero is // unused so that we can tell if we forgot to set a value. ImmShift = REXShift + 1, ImmMask = 15 << ImmShift, Imm8 = 1 << ImmShift, Imm8PCRel = 2 << ImmShift, Imm16 = 3 << ImmShift, Imm16PCRel = 4 << ImmShift, Imm32 = 5 << ImmShift, Imm32PCRel = 6 << ImmShift, Imm32S = 7 << ImmShift, Imm64 = 8 << ImmShift, //===------------------------------------------------------------------===// // FP Instruction Classification... Zero is non-fp instruction. // FPTypeMask - Mask for all of the FP types... FPTypeShift = ImmShift + 4, FPTypeMask = 7 << FPTypeShift, // NotFP - The default, set for instructions that do not use FP registers. NotFP = 0 << FPTypeShift, // ZeroArgFP - 0 arg FP instruction which implicitly pushes ST(0), f.e. fld0 ZeroArgFP = 1 << FPTypeShift, // OneArgFP - 1 arg FP instructions which implicitly read ST(0), such as fst OneArgFP = 2 << FPTypeShift, // OneArgFPRW - 1 arg FP instruction which implicitly read ST(0) and write a // result back to ST(0). For example, fcos, fsqrt, etc. // OneArgFPRW = 3 << FPTypeShift, // TwoArgFP - 2 arg FP instructions which implicitly read ST(0), and an // explicit argument, storing the result to either ST(0) or the implicit // argument. For example: fadd, fsub, fmul, etc... TwoArgFP = 4 << FPTypeShift, // CompareFP - 2 arg FP instructions which implicitly read ST(0) and an // explicit argument, but have no destination. Example: fucom, fucomi, ... CompareFP = 5 << FPTypeShift, // CondMovFP - "2 operand" floating point conditional move instructions. CondMovFP = 6 << FPTypeShift, // SpecialFP - Special instruction forms. Dispatch by opcode explicitly. SpecialFP = 7 << FPTypeShift, // Lock prefix LOCKShift = FPTypeShift + 3, LOCK = 1 << LOCKShift, // REP prefix REPShift = LOCKShift + 1, REP = 1 << REPShift, // Execution domain for SSE instructions. // 0 means normal, non-SSE instruction. SSEDomainShift = REPShift + 1, // Encoding EncodingShift = SSEDomainShift + 2, EncodingMask = 0x3 << EncodingShift, // VEX - encoding using 0xC4/0xC5 VEX = 1, /// XOP - Opcode prefix used by XOP instructions. XOP = 2, // VEX_EVEX - Specifies that this instruction use EVEX form which provides // syntax support up to 32 512-bit register operands and up to 7 16-bit // mask operands as well as source operand data swizzling/memory operand // conversion, eviction hint, and rounding mode. EVEX = 3, // Opcode OpcodeShift = EncodingShift + 2, //===------------------------------------------------------------------===// /// VEX - The opcode prefix used by AVX instructions VEXShift = OpcodeShift + 8, /// VEX_W - Has a opcode specific functionality, but is used in the same /// way as REX_W is for regular SSE instructions. VEX_W = 1U << 0, /// VEX_4V - Used to specify an additional AVX/SSE register. Several 2 /// address instructions in SSE are represented as 3 address ones in AVX /// and the additional register is encoded in VEX_VVVV prefix. VEX_4V = 1U << 1, /// VEX_4VOp3 - Similar to VEX_4V, but used on instructions that encode /// operand 3 with VEX.vvvv. VEX_4VOp3 = 1U << 2, /// VEX_I8IMM - Specifies that the last register used in a AVX instruction, /// must be encoded in the i8 immediate field. This usually happens in /// instructions with 4 operands. VEX_I8IMM = 1U << 3, /// VEX_L - Stands for a bit in the VEX opcode prefix meaning the current /// instruction uses 256-bit wide registers. This is usually auto detected /// if a VR256 register is used, but some AVX instructions also have this /// field marked when using a f256 memory references. VEX_L = 1U << 4, // VEX_LIG - Specifies that this instruction ignores the L-bit in the VEX // prefix. Usually used for scalar instructions. Needed by disassembler. VEX_LIG = 1U << 5, // TODO: we should combine VEX_L and VEX_LIG together to form a 2-bit field // with following encoding: // - 00 V128 // - 01 V256 // - 10 V512 // - 11 LIG (but, in insn encoding, leave VEX.L and EVEX.L in zeros. // this will save 1 tsflag bit // EVEX_K - Set if this instruction requires masking EVEX_K = 1U << 6, // EVEX_Z - Set if this instruction has EVEX.Z field set. EVEX_Z = 1U << 7, // EVEX_L2 - Set if this instruction has EVEX.L' field set. EVEX_L2 = 1U << 8, // EVEX_B - Set if this instruction has EVEX.B field set. EVEX_B = 1U << 9, // EVEX_CD8E - compressed disp8 form, element-size EVEX_CD8EShift = VEXShift + 10, EVEX_CD8EMask = 3, // EVEX_CD8V - compressed disp8 form, vector-width EVEX_CD8VShift = EVEX_CD8EShift + 2, EVEX_CD8VMask = 7, /// Has3DNow0F0FOpcode - This flag indicates that the instruction uses the /// wacky 0x0F 0x0F prefix for 3DNow! instructions. The manual documents /// this as having a 0x0F prefix with a 0x0F opcode, and each instruction /// storing a classifier in the imm8 field. To simplify our implementation, /// we handle this by storeing the classifier in the opcode field and using /// this flag to indicate that the encoder should do the wacky 3DNow! thing. Has3DNow0F0FOpcode = 1U << 15, /// MemOp4 - Used to indicate swapping of operand 3 and 4 to be encoded in /// ModRM or I8IMM. This is used for FMA4 and XOP instructions. MemOp4 = 1U << 16, /// Explicitly specified rounding control EVEX_RC = 1U << 17 }; // getBaseOpcodeFor - This function returns the "base" X86 opcode for the // specified machine instruction. // inline unsigned char getBaseOpcodeFor(uint64_t TSFlags) { return TSFlags >> X86II::OpcodeShift; } inline bool hasImm(uint64_t TSFlags) { return (TSFlags & X86II::ImmMask) != 0; } /// getSizeOfImm - Decode the "size of immediate" field from the TSFlags field /// of the specified instruction. inline unsigned getSizeOfImm(uint64_t TSFlags) { switch (TSFlags & X86II::ImmMask) { default: llvm_unreachable("Unknown immediate size"); case X86II::Imm8: case X86II::Imm8PCRel: return 1; case X86II::Imm16: case X86II::Imm16PCRel: return 2; case X86II::Imm32: case X86II::Imm32S: case X86II::Imm32PCRel: return 4; case X86II::Imm64: return 8; } } /// isImmPCRel - Return true if the immediate of the specified instruction's /// TSFlags indicates that it is pc relative. inline unsigned isImmPCRel(uint64_t TSFlags) { switch (TSFlags & X86II::ImmMask) { default: llvm_unreachable("Unknown immediate size"); case X86II::Imm8PCRel: case X86II::Imm16PCRel: case X86II::Imm32PCRel: return true; case X86II::Imm8: case X86II::Imm16: case X86II::Imm32: case X86II::Imm32S: case X86II::Imm64: return false; } } /// isImmSigned - Return true if the immediate of the specified instruction's /// TSFlags indicates that it is signed. inline unsigned isImmSigned(uint64_t TSFlags) { switch (TSFlags & X86II::ImmMask) { default: llvm_unreachable("Unknown immediate signedness"); case X86II::Imm32S: return true; case X86II::Imm8: case X86II::Imm8PCRel: case X86II::Imm16: case X86II::Imm16PCRel: case X86II::Imm32: case X86II::Imm32PCRel: case X86II::Imm64: return false; } } /// getOperandBias - compute any additional adjustment needed to /// the offset to the start of the memory operand /// in this instruction. /// If this is a two-address instruction,skip one of the register operands. /// FIXME: This should be handled during MCInst lowering. inline int getOperandBias(const MCInstrDesc& Desc) { unsigned NumOps = Desc.getNumOperands(); unsigned CurOp = 0; if (NumOps > 1 && Desc.getOperandConstraint(1, MCOI::TIED_TO) == 0) ++CurOp; else if (NumOps > 3 && Desc.getOperandConstraint(2, MCOI::TIED_TO) == 0 && Desc.getOperandConstraint(3, MCOI::TIED_TO) == 1) // Special case for AVX-512 GATHER with 2 TIED_TO operands // Skip the first 2 operands: dst, mask_wb CurOp += 2; else if (NumOps > 3 && Desc.getOperandConstraint(2, MCOI::TIED_TO) == 0 && Desc.getOperandConstraint(NumOps - 1, MCOI::TIED_TO) == 1) // Special case for GATHER with 2 TIED_TO operands // Skip the first 2 operands: dst, mask_wb CurOp += 2; else if (NumOps > 2 && Desc.getOperandConstraint(NumOps - 2, MCOI::TIED_TO) == 0) // SCATTER ++CurOp; return CurOp; } /// getMemoryOperandNo - The function returns the MCInst operand # for the /// first field of the memory operand. If the instruction doesn't have a /// memory operand, this returns -1. /// /// Note that this ignores tied operands. If there is a tied register which /// is duplicated in the MCInst (e.g. "EAX = addl EAX, [mem]") it is only /// counted as one operand. /// inline int getMemoryOperandNo(uint64_t TSFlags, unsigned Opcode) { switch (TSFlags & X86II::FormMask) { default: llvm_unreachable("Unknown FormMask value in getMemoryOperandNo!"); case X86II::Pseudo: case X86II::RawFrm: case X86II::AddRegFrm: case X86II::MRMDestReg: case X86II::MRMSrcReg: case X86II::RawFrmImm8: case X86II::RawFrmImm16: case X86II::RawFrmMemOffs: case X86II::RawFrmSrc: case X86II::RawFrmDst: case X86II::RawFrmDstSrc: return -1; case X86II::MRMDestMem: return 0; case X86II::MRMSrcMem: { bool HasVEX_4V = (TSFlags >> X86II::VEXShift) & X86II::VEX_4V; bool HasMemOp4 = (TSFlags >> X86II::VEXShift) & X86II::MemOp4; bool HasEVEX_K = ((TSFlags >> X86II::VEXShift) & X86II::EVEX_K); unsigned FirstMemOp = 1; if (HasVEX_4V) ++FirstMemOp;// Skip the register source (which is encoded in VEX_VVVV). if (HasMemOp4) ++FirstMemOp;// Skip the register source (which is encoded in I8IMM). if (HasEVEX_K) ++FirstMemOp;// Skip the mask register // FIXME: Maybe lea should have its own form? This is a horrible hack. //if (Opcode == X86::LEA64r || Opcode == X86::LEA64_32r || // Opcode == X86::LEA16r || Opcode == X86::LEA32r) return FirstMemOp; } case X86II::MRMXr: case X86II::MRM0r: case X86II::MRM1r: case X86II::MRM2r: case X86II::MRM3r: case X86II::MRM4r: case X86II::MRM5r: case X86II::MRM6r: case X86II::MRM7r: return -1; case X86II::MRMXm: case X86II::MRM0m: case X86II::MRM1m: case X86II::MRM2m: case X86II::MRM3m: case X86II::MRM4m: case X86II::MRM5m: case X86II::MRM6m: case X86II::MRM7m: { bool HasVEX_4V = (TSFlags >> X86II::VEXShift) & X86II::VEX_4V; unsigned FirstMemOp = 0; if (HasVEX_4V) ++FirstMemOp;// Skip the register dest (which is encoded in VEX_VVVV). return FirstMemOp; } case X86II::MRM_C0: case X86II::MRM_C1: case X86II::MRM_C2: case X86II::MRM_C3: case X86II::MRM_C4: case X86II::MRM_C8: case X86II::MRM_C9: case X86II::MRM_CA: case X86II::MRM_CB: case X86II::MRM_D0: case X86II::MRM_D1: case X86II::MRM_D4: case X86II::MRM_D5: case X86II::MRM_D6: case X86II::MRM_D8: case X86II::MRM_D9: case X86II::MRM_DA: case X86II::MRM_DB: case X86II::MRM_DC: case X86II::MRM_DD: case X86II::MRM_DE: case X86II::MRM_DF: case X86II::MRM_E0: case X86II::MRM_E1: case X86II::MRM_E2: case X86II::MRM_E3: case X86II::MRM_E4: case X86II::MRM_E5: case X86II::MRM_E8: case X86II::MRM_E9: case X86II::MRM_EA: case X86II::MRM_EB: case X86II::MRM_EC: case X86II::MRM_ED: case X86II::MRM_EE: case X86II::MRM_F0: case X86II::MRM_F1: case X86II::MRM_F2: case X86II::MRM_F3: case X86II::MRM_F4: case X86II::MRM_F5: case X86II::MRM_F6: case X86II::MRM_F7: case X86II::MRM_F8: case X86II::MRM_F9: case X86II::MRM_FA: case X86II::MRM_FB: case X86II::MRM_FC: case X86II::MRM_FD: case X86II::MRM_FE: case X86II::MRM_FF: return -1; } } /// isX86_64ExtendedReg - Is the MachineOperand a x86-64 extended (r8 or /// higher) register? e.g. r8, xmm8, xmm13, etc. inline bool isX86_64ExtendedReg(unsigned RegNo) { if ((RegNo > X86::XMM7 && RegNo <= X86::XMM15) || (RegNo > X86::XMM23 && RegNo <= X86::XMM31) || (RegNo > X86::YMM7 && RegNo <= X86::YMM15) || (RegNo > X86::YMM23 && RegNo <= X86::YMM31) || (RegNo > X86::ZMM7 && RegNo <= X86::ZMM15) || (RegNo > X86::ZMM23 && RegNo <= X86::ZMM31)) return true; switch (RegNo) { default: break; case X86::R8: case X86::R9: case X86::R10: case X86::R11: case X86::R12: case X86::R13: case X86::R14: case X86::R15: case X86::R8D: case X86::R9D: case X86::R10D: case X86::R11D: case X86::R12D: case X86::R13D: case X86::R14D: case X86::R15D: case X86::R8W: case X86::R9W: case X86::R10W: case X86::R11W: case X86::R12W: case X86::R13W: case X86::R14W: case X86::R15W: case X86::R8B: case X86::R9B: case X86::R10B: case X86::R11B: case X86::R12B: case X86::R13B: case X86::R14B: case X86::R15B: case X86::CR8: case X86::CR9: case X86::CR10: case X86::CR11: case X86::CR12: case X86::CR13: case X86::CR14: case X86::CR15: return true; } return false; } /// is32ExtendedReg - Is the MemoryOperand a 32 extended (zmm16 or higher) /// registers? e.g. zmm21, etc. static inline bool is32ExtendedReg(unsigned RegNo) { return ((RegNo > X86::XMM15 && RegNo <= X86::XMM31) || (RegNo > X86::YMM15 && RegNo <= X86::YMM31) || (RegNo > X86::ZMM15 && RegNo <= X86::ZMM31)); } inline bool isX86_64NonExtLowByteReg(unsigned reg) { return (reg == X86::SPL || reg == X86::BPL || reg == X86::SIL || reg == X86::DIL); } } } // end namespace llvm; #endif