6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-27 13:30:05 +00:00
Code Issues Projects Releases Wiki Activity
01352aa187
llvm-6502/lib/Bytecode/Reader/Reader.cpp
Reid Spencer d798a515e9 Discard code that supported old bytecode formats. This makes the Bytecode 
Reader code much easier to read and maintain. Backwards compatibility from
version 5 format has been retained. Older formats will produce an error.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31723 91177308-0d34-0410-b5e6-96231b3b80d8
2006-11-14 04:47:22 +00:00

2616 lines
92 KiB
C++
Raw Blame History

//===- Reader.cpp - Code to read bytecode files ---------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This library implements the functionality defined in llvm/Bytecode/Reader.h
//
// Note that this library should be as fast as possible, reentrant, and
// threadsafe!!
//
// TODO: Allow passing in an option to ignore the symbol table
//
//===----------------------------------------------------------------------===//
#include "Reader.h"
#include "llvm/Assembly/AutoUpgrade.h"
#include "llvm/Bytecode/BytecodeHandler.h"
#include "llvm/BasicBlock.h"
#include "llvm/CallingConv.h"
#include "llvm/Constants.h"
#include "llvm/InlineAsm.h"
#include "llvm/Instructions.h"
#include "llvm/SymbolTable.h"
#include "llvm/Bytecode/Format.h"
#include "llvm/Config/alloca.h"
#include "llvm/Support/GetElementPtrTypeIterator.h"
#include "llvm/Support/Compressor.h"
#include "llvm/Support/MathExtras.h"
#include "llvm/ADT/StringExtras.h"
#include <sstream>
#include <algorithm>
using namespace llvm;
namespace {
/// @brief A class for maintaining the slot number definition
/// as a placeholder for the actual definition for forward constants defs.
class ConstantPlaceHolder : public ConstantExpr {
ConstantPlaceHolder(); // DO NOT IMPLEMENT
void operator=(const ConstantPlaceHolder &); // DO NOT IMPLEMENT
public:
Use Op;
ConstantPlaceHolder(const Type *Ty)
: ConstantExpr(Ty, Instruction::UserOp1, &Op, 1),
Op(UndefValue::get(Type::IntTy), this) {
}
};
}
// Provide some details on error
inline void BytecodeReader::error(const std::string& err) {
ErrorMsg = err + " (Vers=" + itostr(RevisionNum) + ", Pos="
+ itostr(At-MemStart) + ")";
longjmp(context,1);
}
//===----------------------------------------------------------------------===//
// Bytecode Reading Methods
//===----------------------------------------------------------------------===//
/// Determine if the current block being read contains any more data.
inline bool BytecodeReader::moreInBlock() {
return At < BlockEnd;
}
/// Throw an error if we've read past the end of the current block
inline void BytecodeReader::checkPastBlockEnd(const char * block_name) {
if (At > BlockEnd)
error(std::string("Attempt to read past the end of ") + block_name +
" block.");
}
/// Read a whole unsigned integer
inline unsigned BytecodeReader::read_uint() {
if (At+4 > BlockEnd)
error("Ran out of data reading uint!");
At += 4;
return At[-4] | (At[-3] << 8) | (At[-2] << 16) | (At[-1] << 24);
}
/// Read a variable-bit-rate encoded unsigned integer
inline unsigned BytecodeReader::read_vbr_uint() {
unsigned Shift = 0;
unsigned Result = 0;
BufPtr Save = At;
do {
if (At == BlockEnd)
error("Ran out of data reading vbr_uint!");
Result |= (unsigned)((*At++) & 0x7F) << Shift;
Shift += 7;
} while (At[-1] & 0x80);
if (Handler) Handler->handleVBR32(At-Save);
return Result;
}
/// Read a variable-bit-rate encoded unsigned 64-bit integer.
inline uint64_t BytecodeReader::read_vbr_uint64() {
unsigned Shift = 0;
uint64_t Result = 0;
BufPtr Save = At;
do {
if (At == BlockEnd)
error("Ran out of data reading vbr_uint64!");
Result |= (uint64_t)((*At++) & 0x7F) << Shift;
Shift += 7;
} while (At[-1] & 0x80);
if (Handler) Handler->handleVBR64(At-Save);
return Result;
}
/// Read a variable-bit-rate encoded signed 64-bit integer.
inline int64_t BytecodeReader::read_vbr_int64() {
uint64_t R = read_vbr_uint64();
if (R & 1) {
if (R != 1)
return -(int64_t)(R >> 1);
else // There is no such thing as -0 with integers. "-0" really means
// 0x8000000000000000.
return 1LL << 63;
} else
return (int64_t)(R >> 1);
}
/// Read a pascal-style string (length followed by text)
inline std::string BytecodeReader::read_str() {
unsigned Size = read_vbr_uint();
const unsigned char *OldAt = At;
At += Size;
if (At > BlockEnd) // Size invalid?
error("Ran out of data reading a string!");
return std::string((char*)OldAt, Size);
}
/// Read an arbitrary block of data
inline void BytecodeReader::read_data(void *Ptr, void *End) {
unsigned char *Start = (unsigned char *)Ptr;
unsigned Amount = (unsigned char *)End - Start;
if (At+Amount > BlockEnd)
error("Ran out of data!");
std::copy(At, At+Amount, Start);
At += Amount;
}
/// Read a float value in little-endian order
inline void BytecodeReader::read_float(float& FloatVal) {
/// FIXME: This isn't optimal, it has size problems on some platforms
/// where FP is not IEEE.
FloatVal = BitsToFloat(At[0] | (At[1] << 8) | (At[2] << 16) | (At[3] << 24));
At+=sizeof(uint32_t);
}
/// Read a double value in little-endian order
inline void BytecodeReader::read_double(double& DoubleVal) {
/// FIXME: This isn't optimal, it has size problems on some platforms
/// where FP is not IEEE.
DoubleVal = BitsToDouble((uint64_t(At[0]) << 0) | (uint64_t(At[1]) << 8) |
(uint64_t(At[2]) << 16) | (uint64_t(At[3]) << 24) |
(uint64_t(At[4]) << 32) | (uint64_t(At[5]) << 40) |
(uint64_t(At[6]) << 48) | (uint64_t(At[7]) << 56));
At+=sizeof(uint64_t);
}
/// Read a block header and obtain its type and size
inline void BytecodeReader::read_block(unsigned &Type, unsigned &Size) {
Size = read_uint(); // Read the header
Type = Size & 0x1F; // mask low order five bits to get type
Size >>= 5; // high order 27 bits is the size
BlockStart = At;
if (At + Size > BlockEnd)
error("Attempt to size a block past end of memory");
BlockEnd = At + Size;
if (Handler) Handler->handleBlock(Type, BlockStart, Size);
}
//===----------------------------------------------------------------------===//
// IR Lookup Methods
//===----------------------------------------------------------------------===//
/// Determine if a type id has an implicit null value
inline bool BytecodeReader::hasImplicitNull(unsigned TyID) {
return TyID != Type::LabelTyID && TyID != Type::VoidTyID;
}
/// Obtain a type given a typeid and account for things like compaction tables,
/// function level vs module level, and the offsetting for the primitive types.
const Type *BytecodeReader::getType(unsigned ID) {
if (ID < Type::FirstDerivedTyID)
if (const Type *T = Type::getPrimitiveType((Type::TypeID)ID))
return T; // Asked for a primitive type...
// Otherwise, derived types need offset...
ID -= Type::FirstDerivedTyID;
if (!CompactionTypes.empty()) {
if (ID >= CompactionTypes.size())
error("Type ID out of range for compaction table!");
return CompactionTypes[ID].first;
}
// Is it a module-level type?
if (ID < ModuleTypes.size())
return ModuleTypes[ID].get();
// Nope, is it a function-level type?
ID -= ModuleTypes.size();
if (ID < FunctionTypes.size())
return FunctionTypes[ID].get();
error("Illegal type reference!");
return Type::VoidTy;
}
/// This method just saves some coding. It uses read_vbr_uint to read
/// in a sanitized type id, errors that its not the type type, and
/// then calls getType to return the type value.
inline const Type* BytecodeReader::readType() {
return getType(read_vbr_uint());
}
/// Get the slot number associated with a type accounting for primitive
/// types, compaction tables, and function level vs module level.
unsigned BytecodeReader::getTypeSlot(const Type *Ty) {
if (Ty->isPrimitiveType())
return Ty->getTypeID();
// Scan the compaction table for the type if needed.
if (!CompactionTypes.empty()) {
for (unsigned i = 0, e = CompactionTypes.size(); i != e; ++i)
if (CompactionTypes[i].first == Ty)
return Type::FirstDerivedTyID + i;
error("Couldn't find type specified in compaction table!");
}
// Check the function level types first...
TypeListTy::iterator I = std::find(FunctionTypes.begin(),
FunctionTypes.end(), Ty);
if (I != FunctionTypes.end())
return Type::FirstDerivedTyID + ModuleTypes.size() +
(&*I - &FunctionTypes[0]);
// If we don't have our cache yet, build it now.
if (ModuleTypeIDCache.empty()) {
unsigned N = 0;
ModuleTypeIDCache.reserve(ModuleTypes.size());
for (TypeListTy::iterator I = ModuleTypes.begin(), E = ModuleTypes.end();
I != E; ++I, ++N)
ModuleTypeIDCache.push_back(std::make_pair(*I, N));
std::sort(ModuleTypeIDCache.begin(), ModuleTypeIDCache.end());
}
// Binary search the cache for the entry.
std::vector<std::pair<const Type*, unsigned> >::iterator IT =
std::lower_bound(ModuleTypeIDCache.begin(), ModuleTypeIDCache.end(),
std::make_pair(Ty, 0U));
if (IT == ModuleTypeIDCache.end() || IT->first != Ty)
error("Didn't find type in ModuleTypes.");
return Type::FirstDerivedTyID + IT->second;
}
/// This is just like getType, but when a compaction table is in use, it is
/// ignored. It also ignores function level types.
/// @see getType
const Type *BytecodeReader::getGlobalTableType(unsigned Slot) {
if (Slot < Type::FirstDerivedTyID) {
const Type *Ty = Type::getPrimitiveType((Type::TypeID)Slot);
if (!Ty)
error("Not a primitive type ID?");
return Ty;
}
Slot -= Type::FirstDerivedTyID;
if (Slot >= ModuleTypes.size())
error("Illegal compaction table type reference!");
return ModuleTypes[Slot];
}
/// This is just like getTypeSlot, but when a compaction table is in use, it
/// is ignored. It also ignores function level types.
unsigned BytecodeReader::getGlobalTableTypeSlot(const Type *Ty) {
if (Ty->isPrimitiveType())
return Ty->getTypeID();
// If we don't have our cache yet, build it now.
if (ModuleTypeIDCache.empty()) {
unsigned N = 0;
ModuleTypeIDCache.reserve(ModuleTypes.size());
for (TypeListTy::iterator I = ModuleTypes.begin(), E = ModuleTypes.end();
I != E; ++I, ++N)
ModuleTypeIDCache.push_back(std::make_pair(*I, N));
std::sort(ModuleTypeIDCache.begin(), ModuleTypeIDCache.end());
}
// Binary search the cache for the entry.
std::vector<std::pair<const Type*, unsigned> >::iterator IT =
std::lower_bound(ModuleTypeIDCache.begin(), ModuleTypeIDCache.end(),
std::make_pair(Ty, 0U));
if (IT == ModuleTypeIDCache.end() || IT->first != Ty)
error("Didn't find type in ModuleTypes.");
return Type::FirstDerivedTyID + IT->second;
}
/// Retrieve a value of a given type and slot number, possibly creating
/// it if it doesn't already exist.
Value * BytecodeReader::getValue(unsigned type, unsigned oNum, bool Create) {
assert(type != Type::LabelTyID && "getValue() cannot get blocks!");
unsigned Num = oNum;
// If there is a compaction table active, it defines the low-level numbers.
// If not, the module values define the low-level numbers.
if (CompactionValues.size() > type && !CompactionValues[type].empty()) {
if (Num < CompactionValues[type].size())
return CompactionValues[type][Num];
Num -= CompactionValues[type].size();
} else {
// By default, the global type id is the type id passed in
unsigned GlobalTyID = type;
// If the type plane was compactified, figure out the global type ID by
// adding the derived type ids and the distance.
if (!CompactionTypes.empty() && type >= Type::FirstDerivedTyID)
GlobalTyID = CompactionTypes[type-Type::FirstDerivedTyID].second;
if (hasImplicitNull(GlobalTyID)) {
const Type *Ty = getType(type);
if (!isa<OpaqueType>(Ty)) {
if (Num == 0)
return Constant::getNullValue(Ty);
--Num;
}
}
if (GlobalTyID < ModuleValues.size() && ModuleValues[GlobalTyID]) {
if (Num < ModuleValues[GlobalTyID]->size())
return ModuleValues[GlobalTyID]->getOperand(Num);
Num -= ModuleValues[GlobalTyID]->size();
}
}
if (FunctionValues.size() > type &&
FunctionValues[type] &&
Num < FunctionValues[type]->size())
return FunctionValues[type]->getOperand(Num);
if (!Create) return 0; // Do not create a placeholder?
// Did we already create a place holder?
std::pair<unsigned,unsigned> KeyValue(type, oNum);
ForwardReferenceMap::iterator I = ForwardReferences.lower_bound(KeyValue);
if (I != ForwardReferences.end() && I->first == KeyValue)
return I->second; // We have already created this placeholder
// If the type exists (it should)
if (const Type* Ty = getType(type)) {
// Create the place holder
Value *Val = new Argument(Ty);
ForwardReferences.insert(I, std::make_pair(KeyValue, Val));
return Val;
}
error("Can't create placeholder for value of type slot #" + utostr(type));
return 0; // just silence warning, error calls longjmp
}
/// This is just like getValue, but when a compaction table is in use, it
/// is ignored. Also, no forward references or other fancy features are
/// supported.
Value* BytecodeReader::getGlobalTableValue(unsigned TyID, unsigned SlotNo) {
if (SlotNo == 0)
return Constant::getNullValue(getType(TyID));
if (!CompactionTypes.empty() && TyID >= Type::FirstDerivedTyID) {
TyID -= Type::FirstDerivedTyID;
if (TyID >= CompactionTypes.size())
error("Type ID out of range for compaction table!");
TyID = CompactionTypes[TyID].second;
}
--SlotNo;
if (TyID >= ModuleValues.size() || ModuleValues[TyID] == 0 ||
SlotNo >= ModuleValues[TyID]->size()) {
if (TyID >= ModuleValues.size() || ModuleValues[TyID] == 0)
error("Corrupt compaction table entry!"
+ utostr(TyID) + ", " + utostr(SlotNo) + ": "
+ utostr(ModuleValues.size()));
else
error("Corrupt compaction table entry!"
+ utostr(TyID) + ", " + utostr(SlotNo) + ": "
+ utostr(ModuleValues.size()) + ", "
+ utohexstr(reinterpret_cast<uint64_t>(((void*)ModuleValues[TyID])))
+ ", "
+ utostr(ModuleValues[TyID]->size()));
}
return ModuleValues[TyID]->getOperand(SlotNo);
}
/// Just like getValue, except that it returns a null pointer
/// only on error. It always returns a constant (meaning that if the value is
/// defined, but is not a constant, that is an error). If the specified
/// constant hasn't been parsed yet, a placeholder is defined and used.
/// Later, after the real value is parsed, the placeholder is eliminated.
Constant* BytecodeReader::getConstantValue(unsigned TypeSlot, unsigned Slot) {
if (Value *V = getValue(TypeSlot, Slot, false))
if (Constant *C = dyn_cast<Constant>(V))
return C; // If we already have the value parsed, just return it
else
error("Value for slot " + utostr(Slot) +
" is expected to be a constant!");
std::pair<unsigned, unsigned> Key(TypeSlot, Slot);
ConstantRefsType::iterator I = ConstantFwdRefs.lower_bound(Key);
if (I != ConstantFwdRefs.end() && I->first == Key) {
return I->second;
} else {
// Create a placeholder for the constant reference and
// keep track of the fact that we have a forward ref to recycle it
Constant *C = new ConstantPlaceHolder(getType(TypeSlot));
// Keep track of the fact that we have a forward ref to recycle it
ConstantFwdRefs.insert(I, std::make_pair(Key, C));
return C;
}
}
//===----------------------------------------------------------------------===//
// IR Construction Methods
//===----------------------------------------------------------------------===//
/// As values are created, they are inserted into the appropriate place
/// with this method. The ValueTable argument must be one of ModuleValues
/// or FunctionValues data members of this class.
unsigned BytecodeReader::insertValue(Value *Val, unsigned type,
ValueTable &ValueTab) {
if (ValueTab.size() <= type)
ValueTab.resize(type+1);
if (!ValueTab[type]) ValueTab[type] = new ValueList();
ValueTab[type]->push_back(Val);
bool HasOffset = hasImplicitNull(type) && !isa<OpaqueType>(Val->getType());
return ValueTab[type]->size()-1 + HasOffset;
}
/// Insert the arguments of a function as new values in the reader.
void BytecodeReader::insertArguments(Function* F) {
const FunctionType *FT = F->getFunctionType();
Function::arg_iterator AI = F->arg_begin();
for (FunctionType::param_iterator It = FT->param_begin();
It != FT->param_end(); ++It, ++AI)
insertValue(AI, getTypeSlot(AI->getType()), FunctionValues);
}
// Convert previous opcode values into the current value and/or construct
// the instruction. This function handles all *abnormal* cases for instruction
// generation based on obsolete opcode values. The normal cases are handled
// in ParseInstruction below. Generally this function just produces a new
// Opcode value (first argument). In a few cases (VAArg, VANext) the upgrade
// path requies that the instruction (sequence) be generated differently from
// the normal case in order to preserve the original semantics. In these
// cases the result of the function will be a non-zero Instruction pointer. In
// all other cases, zero will be returned indicating that the *normal*
// instruction generation should be used, but with the new Opcode value.
//
Instruction*
BytecodeReader::upgradeInstrOpcodes(
unsigned &Opcode, ///< The old opcode, possibly updated by this function
std::vector<unsigned> &Oprnds, ///< The operands to the instruction
unsigned &iType, ///< The type code from the bytecode file
const Type* InstTy, ///< The type of the instruction
BasicBlock* BB ///< The basic block to insert into, if we need to
) {
// First, short circuit this if no conversion is required. When signless
// instructions were implemented the entire opcode sequence was revised in
// two stages: first Div/Rem became signed, then Shr/Cast/Setcc became
// signed. If all of these instructions are signed then we don't have to
// upgrade the opcode.
if (!hasSignlessDivRem && !hasSignlessShrCastSetcc)
return 0; // The opcode is fine the way it is.
// If this is bytecode version 6, that only had signed Rem and Div
// instructions, then we must compensate for those two instructions only.
// So that the switch statement below works, we're trying to turn this into
// a version 5 opcode. To do that we must adjust the opcode to 10 (Div) if its
// any of the UDiv, SDiv or FDiv instructions; or, adjust the opcode to
// 11 (Rem) if its any of the URem, SRem, or FRem instructions; or, simply
// decrement the instruction code if its beyond FRem.
if (!hasSignlessDivRem) {
// If its one of the signed Div/Rem opcodes, its fine the way it is
if (Opcode >= 10 && Opcode <= 12) // UDiv through FDiv
Opcode = 10; // Div
else if (Opcode >=13 && Opcode <= 15) // URem through FRem
Opcode = 11; // Rem
else if (Opcode >= 16 && Opcode <= 35) // And through Shr
// Adjust for new instruction codes
Opcode -= 4;
else if (Opcode >= 36 && Opcode <= 42) // Everything after Select
// In vers 6 bytecode we eliminated the placeholders for the obsolete
// VAARG and VANEXT instructions. Consequently those two slots were
// filled starting with Select (36) which was 34. So now we only need
// to subtract two. This circumvents hitting opcodes 32 and 33
Opcode -= 2;
else { // Opcode < 10 or > 42
// No upgrade necessary.
return 0;
}
}
// Declare the resulting instruction we might build. In general we just
// change the Opcode argument but in a few cases we need to generate the
// Instruction here because the upgrade case is significantly different from
// the normal case.
Instruction *Result = 0;
// We're dealing with an upgrade situation. For each of the opcode values,
// perform the necessary conversion.
switch (Opcode) {
default: // Error
// This switch statement provides cases for all known opcodes prior to
// version 6 bytecode format. We know we're in an upgrade situation so
// if there isn't a match in this switch, then something is horribly
// wrong.
error("Unknown obsolete opcode encountered.");
break;
case 1: // Ret
Opcode = Instruction::Ret;
break;
case 2: // Br
Opcode = Instruction::Br;
break;
case 3: // Switch
Opcode = Instruction::Switch;
break;
case 4: // Invoke
Opcode = Instruction::Invoke;
break;
case 5: // Unwind
Opcode = Instruction::Unwind;
break;
case 6: // Unreachable
Opcode = Instruction::Unreachable;
break;
case 7: // Add
Opcode = Instruction::Add;
break;
case 8: // Sub
Opcode = Instruction::Sub;
break;
case 9: // Mul
Opcode = Instruction::Mul;
break;
case 10: // Div
// The type of the instruction is based on the operands. We need to select
// fdiv, udiv or sdiv based on that type. The iType values are hardcoded
// to the values used in bytecode version 5 (and prior) because it is
// likely these codes will change in future versions of LLVM.
if (iType == 10 || iType == 11 )
Opcode = Instruction::FDiv;
else if (iType >= 2 && iType <= 9 && iType % 2 != 0)
Opcode = Instruction::SDiv;
else
Opcode = Instruction::UDiv;
break;
case 11: // Rem
// As with "Div", make the signed/unsigned or floating point Rem
// instruction choice based on the type of the operands.
if (iType == 10 || iType == 11)
Opcode = Instruction::FRem;
else if (iType >= 2 && iType <= 9 && iType % 2 != 0)
Opcode = Instruction::SRem;
else
Opcode = Instruction::URem;
break;
case 12: // And
Opcode = Instruction::And;
break;
case 13: // Or
Opcode = Instruction::Or;
break;
case 14: // Xor
Opcode = Instruction::Xor;
break;
case 15: // SetEQ
Opcode = Instruction::SetEQ;
break;
case 16: // SetNE
Opcode = Instruction::SetNE;
break;
case 17: // SetLE
Opcode = Instruction::SetLE;
break;
case 18: // SetGE
Opcode = Instruction::SetGE;
break;
case 19: // SetLT
Opcode = Instruction::SetLT;
break;
case 20: // SetGT
Opcode = Instruction::SetGT;
break;
case 21: // Malloc
Opcode = Instruction::Malloc;
break;
case 22: // Free
Opcode = Instruction::Free;
break;
case 23: // Alloca
Opcode = Instruction::Alloca;
break;
case 24: // Load
Opcode = Instruction::Load;
break;
case 25: // Store
Opcode = Instruction::Store;
break;
case 26: // GetElementPtr
Opcode = Instruction::GetElementPtr;
break;
case 27: // PHI
Opcode = Instruction::PHI;
break;
case 28: // Cast
Opcode = Instruction::Cast;
break;
case 29: // Call
Opcode = Instruction::Call;
break;
case 30: // Shl
Opcode = Instruction::Shl;
break;
case 31: // Shr
// The type of the instruction is based on the operands. We need to
// select ashr or lshr based on that type. The iType values are hardcoded
// to the values used in bytecode version 5 (and prior) because it is
// likely these codes will change in future versions of LLVM. This if
// statement says "if (integer type and signed)"
if (iType >= 2 && iType <= 9 && iType % 2 != 0)
Opcode = Instruction::AShr;
else
Opcode = Instruction::LShr;
break;
case 32: { //VANext_old ( <= llvm 1.5 )
const Type* ArgTy = getValue(iType, Oprnds[0])->getType();
Function* NF = TheModule->getOrInsertFunction(
"llvm.va_copy", ArgTy, ArgTy, (Type *)0);
// In llvm 1.6 the VANext instruction was dropped because it was only
// necessary to have a VAArg instruction. The code below transforms an
// old vanext instruction into the equivalent code given only the
// availability of the new vaarg instruction. Essentially, the transform
// is as follows:
// b = vanext a, t ->
// foo = alloca 1 of t
// bar = vacopy a
// store bar -> foo
// tmp = vaarg foo, t
// b = load foo
AllocaInst* foo = new AllocaInst(ArgTy, 0, "vanext.fix");
BB->getInstList().push_back(foo);
CallInst* bar = new CallInst(NF, getValue(iType, Oprnds[0]));
BB->getInstList().push_back(bar);
BB->getInstList().push_back(new StoreInst(bar, foo));
Instruction* tmp = new VAArgInst(foo, getType(Oprnds[1]));
BB->getInstList().push_back(tmp);
Result = new LoadInst(foo);
break;
}
case 33: { //VAArg_old
const Type* ArgTy = getValue(iType, Oprnds[0])->getType();
Function* NF = TheModule->getOrInsertFunction(
"llvm.va_copy", ArgTy, ArgTy, (Type *)0);
// In llvm 1.6 the VAArg's instruction semantics were changed. The code
// below transforms an old vaarg instruction into the equivalent code
// given only the availability of the new vaarg instruction. Essentially,
// the transform is as follows:
// b = vaarg a, t ->
// foo = alloca 1 of t
// bar = vacopy a
// store bar -> foo
// b = vaarg foo, t
AllocaInst* foo = new AllocaInst(ArgTy, 0, "vaarg.fix");
BB->getInstList().push_back(foo);
CallInst* bar = new CallInst(NF, getValue(iType, Oprnds[0]));
BB->getInstList().push_back(bar);
BB->getInstList().push_back(new StoreInst(bar, foo));
Result = new VAArgInst(foo, getType(Oprnds[1]));
break;
}
case 34: // Select
Opcode = Instruction::Select;
break;
case 35: // UserOp1
Opcode = Instruction::UserOp1;
break;
case 36: // UserOp2
Opcode = Instruction::UserOp2;
break;
case 37: // VAArg
Opcode = Instruction::VAArg;
break;
case 38: // ExtractElement
Opcode = Instruction::ExtractElement;
break;
case 39: // InsertElement
Opcode = Instruction::InsertElement;
break;
case 40: // ShuffleVector
Opcode = Instruction::ShuffleVector;
break;
case 56: // Invoke with encoded CC
case 57: // Invoke Fast CC
case 58: // Call with extra operand for calling conv
case 59: // tail call, Fast CC
case 60: // normal call, Fast CC
case 61: // tail call, C Calling Conv
case 62: // volatile load
case 63: // volatile store
// In all these cases, we pass the opcode through. The new version uses
// the same code (for now, this might change in 2.0). These are listed
// here to document the opcodes in use in vers 5 bytecode and to make it
// easier to migrate these opcodes in the future.
break;
}
return Result;
}
//===----------------------------------------------------------------------===//
// Bytecode Parsing Methods
//===----------------------------------------------------------------------===//
/// This method parses a single instruction. The instruction is
/// inserted at the end of the \p BB provided. The arguments of
/// the instruction are provided in the \p Oprnds vector.
void BytecodeReader::ParseInstruction(std::vector<unsigned> &Oprnds,
BasicBlock* BB) {
BufPtr SaveAt = At;
// Clear instruction data
Oprnds.clear();
unsigned iType = 0;
unsigned Opcode = 0;
unsigned Op = read_uint();
// bits Instruction format: Common to all formats
// --------------------------
// 01-00: Opcode type, fixed to 1.
// 07-02: Opcode
Opcode = (Op >> 2) & 63;
Oprnds.resize((Op >> 0) & 03);
// Extract the operands
switch (Oprnds.size()) {
case 1:
// bits Instruction format:
// --------------------------
// 19-08: Resulting type plane
// 31-20: Operand #1 (if set to (2^12-1), then zero operands)
//
iType = (Op >> 8) & 4095;
Oprnds[0] = (Op >> 20) & 4095;
if (Oprnds[0] == 4095) // Handle special encoding for 0 operands...
Oprnds.resize(0);
break;
case 2:
// bits Instruction format:
// --------------------------
// 15-08: Resulting type plane
// 23-16: Operand #1
// 31-24: Operand #2
//
iType = (Op >> 8) & 255;
Oprnds[0] = (Op >> 16) & 255;
Oprnds[1] = (Op >> 24) & 255;
break;
case 3:
// bits Instruction format:
// --------------------------
// 13-08: Resulting type plane
// 19-14: Operand #1
// 25-20: Operand #2
// 31-26: Operand #3
//
iType = (Op >> 8) & 63;
Oprnds[0] = (Op >> 14) & 63;
Oprnds[1] = (Op >> 20) & 63;
Oprnds[2] = (Op >> 26) & 63;
break;
case 0:
At -= 4; // Hrm, try this again...
Opcode = read_vbr_uint();
Opcode >>= 2;
iType = read_vbr_uint();
unsigned NumOprnds = read_vbr_uint();
Oprnds.resize(NumOprnds);
if (NumOprnds == 0)
error("Zero-argument instruction found; this is invalid.");
for (unsigned i = 0; i != NumOprnds; ++i)
Oprnds[i] = read_vbr_uint();
break;
}
const Type *InstTy = getType(iType);
// Make the necessary adjustments for dealing with backwards compatibility
// of opcodes.
Instruction* Result =
upgradeInstrOpcodes(Opcode, Oprnds, iType, InstTy, BB);
// We have enough info to inform the handler now.
if (Handler)
Handler->handleInstruction(Opcode, InstTy, Oprnds, At-SaveAt);
// If the backwards compatibility code didn't produce an instruction then
// we do the *normal* thing ..
if (!Result) {
// First, handle the easy binary operators case
if (Opcode >= Instruction::BinaryOpsBegin &&
Opcode < Instruction::BinaryOpsEnd && Oprnds.size() == 2)
Result = BinaryOperator::create(Instruction::BinaryOps(Opcode),
getValue(iType, Oprnds[0]),
getValue(iType, Oprnds[1]));
// Indicate that we don't think this is a call instruction (yet).
// Process based on the Opcode read
switch (Opcode) {
default: // There was an error, this shouldn't happen.
if (Result == 0)
error("Illegal instruction read!");
break;
case Instruction::VAArg:
if (Oprnds.size() != 2)
error("Invalid VAArg instruction!");
Result = new VAArgInst(getValue(iType, Oprnds[0]),
getType(Oprnds[1]));
break;
case Instruction::ExtractElement: {
if (Oprnds.size() != 2)
error("Invalid extractelement instruction!");
Value *V1 = getValue(iType, Oprnds[0]);
Value *V2 = getValue(Type::UIntTyID, Oprnds[1]);
if (!ExtractElementInst::isValidOperands(V1, V2))
error("Invalid extractelement instruction!");
Result = new ExtractElementInst(V1, V2);
break;
}
case Instruction::InsertElement: {
const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
if (!PackedTy || Oprnds.size() != 3)
error("Invalid insertelement instruction!");
Value *V1 = getValue(iType, Oprnds[0]);
Value *V2 = getValue(getTypeSlot(PackedTy->getElementType()),Oprnds[1]);
Value *V3 = getValue(Type::UIntTyID, Oprnds[2]);
if (!InsertElementInst::isValidOperands(V1, V2, V3))
error("Invalid insertelement instruction!");
Result = new InsertElementInst(V1, V2, V3);
break;
}
case Instruction::ShuffleVector: {
const PackedType *PackedTy = dyn_cast<PackedType>(InstTy);
if (!PackedTy || Oprnds.size() != 3)
error("Invalid shufflevector instruction!");
Value *V1 = getValue(iType, Oprnds[0]);
Value *V2 = getValue(iType, Oprnds[1]);
const PackedType *EltTy =
PackedType::get(Type::UIntTy, PackedTy->getNumElements());
Value *V3 = getValue(getTypeSlot(EltTy), Oprnds[2]);
if (!ShuffleVectorInst::isValidOperands(V1, V2, V3))
error("Invalid shufflevector instruction!");
Result = new ShuffleVectorInst(V1, V2, V3);
break;
}
case Instruction::Cast:
if (Oprnds.size() != 2)
error("Invalid Cast instruction!");
Result = new CastInst(getValue(iType, Oprnds[0]),
getType(Oprnds[1]));
break;
case Instruction::Select:
if (Oprnds.size() != 3)
error("Invalid Select instruction!");
Result = new SelectInst(getValue(Type::BoolTyID, Oprnds[0]),
getValue(iType, Oprnds[1]),
getValue(iType, Oprnds[2]));
break;
case Instruction::PHI: {
if (Oprnds.size() == 0 || (Oprnds.size() & 1))
error("Invalid phi node encountered!");
PHINode *PN = new PHINode(InstTy);
PN->reserveOperandSpace(Oprnds.size());
for (unsigned i = 0, e = Oprnds.size(); i != e; i += 2)
PN->addIncoming(
getValue(iType, Oprnds[i]), getBasicBlock(Oprnds[i+1]));
Result = PN;
break;
}
case Instruction::Shl:
case Instruction::LShr:
case Instruction::AShr:
Result = new ShiftInst(Instruction::OtherOps(Opcode),
getValue(iType, Oprnds[0]),
getValue(Type::UByteTyID, Oprnds[1]));
break;
case Instruction::Ret:
if (Oprnds.size() == 0)
Result = new ReturnInst();
else if (Oprnds.size() == 1)
Result = new ReturnInst(getValue(iType, Oprnds[0]));
else
error("Unrecognized instruction!");
break;
case Instruction::Br:
if (Oprnds.size() == 1)
Result = new BranchInst(getBasicBlock(Oprnds[0]));
else if (Oprnds.size() == 3)
Result = new BranchInst(getBasicBlock(Oprnds[0]),
getBasicBlock(Oprnds[1]), getValue(Type::BoolTyID , Oprnds[2]));
else
error("Invalid number of operands for a 'br' instruction!");
break;
case Instruction::Switch: {
if (Oprnds.size() & 1)
error("Switch statement with odd number of arguments!");
SwitchInst *I = new SwitchInst(getValue(iType, Oprnds[0]),
getBasicBlock(Oprnds[1]),
Oprnds.size()/2-1);
for (unsigned i = 2, e = Oprnds.size(); i != e; i += 2)
I->addCase(cast<ConstantInt>(getValue(iType, Oprnds[i])),
getBasicBlock(Oprnds[i+1]));
Result = I;
break;
}
case 58: // Call with extra operand for calling conv
case 59: // tail call, Fast CC
case 60: // normal call, Fast CC
case 61: // tail call, C Calling Conv
case Instruction::Call: { // Normal Call, C Calling Convention
if (Oprnds.size() == 0)
error("Invalid call instruction encountered!");
Value *F = getValue(iType, Oprnds[0]);
unsigned CallingConv = CallingConv::C;
bool isTailCall = false;
if (Opcode == 61 || Opcode == 59)
isTailCall = true;
if (Opcode == 58) {
isTailCall = Oprnds.back() & 1;
CallingConv = Oprnds.back() >> 1;
Oprnds.pop_back();
} else if (Opcode == 59 || Opcode == 60) {
CallingConv = CallingConv::Fast;
}
// Check to make sure we have a pointer to function type
const PointerType *PTy = dyn_cast<PointerType>(F->getType());
if (PTy == 0) error("Call to non function pointer value!");
const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
if (FTy == 0) error("Call to non function pointer value!");
std::vector<Value *> Params;
if (!FTy->isVarArg()) {
FunctionType::param_iterator It = FTy->param_begin();
for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
if (It == FTy->param_end())
error("Invalid call instruction!");
Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
}
if (It != FTy->param_end())
error("Invalid call instruction!");
} else {
Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
unsigned FirstVariableOperand;
if (Oprnds.size() < FTy->getNumParams())
error("Call instruction missing operands!");
// Read all of the fixed arguments
for (unsigned i = 0, e = FTy->getNumParams(); i != e; ++i)
Params.push_back(
getValue(getTypeSlot(FTy->getParamType(i)),Oprnds[i]));
FirstVariableOperand = FTy->getNumParams();
if ((Oprnds.size()-FirstVariableOperand) & 1)
error("Invalid call instruction!"); // Must be pairs of type/value
for (unsigned i = FirstVariableOperand, e = Oprnds.size();
i != e; i += 2)
Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
}
Result = new CallInst(F, Params);
if (isTailCall) cast<CallInst>(Result)->setTailCall();
if (CallingConv) cast<CallInst>(Result)->setCallingConv(CallingConv);
break;
}
case 56: // Invoke with encoded CC
case 57: // Invoke Fast CC
case Instruction::Invoke: { // Invoke C CC
if (Oprnds.size() < 3)
error("Invalid invoke instruction!");
Value *F = getValue(iType, Oprnds[0]);
// Check to make sure we have a pointer to function type
const PointerType *PTy = dyn_cast<PointerType>(F->getType());
if (PTy == 0)
error("Invoke to non function pointer value!");
const FunctionType *FTy = dyn_cast<FunctionType>(PTy->getElementType());
if (FTy == 0)
error("Invoke to non function pointer value!");
std::vector<Value *> Params;
BasicBlock *Normal, *Except;
unsigned CallingConv = CallingConv::C;
if (Opcode == 57)
CallingConv = CallingConv::Fast;
else if (Opcode == 56) {
CallingConv = Oprnds.back();
Oprnds.pop_back();
}
if (!FTy->isVarArg()) {
Normal = getBasicBlock(Oprnds[1]);
Except = getBasicBlock(Oprnds[2]);
FunctionType::param_iterator It = FTy->param_begin();
for (unsigned i = 3, e = Oprnds.size(); i != e; ++i) {
if (It == FTy->param_end())
error("Invalid invoke instruction!");
Params.push_back(getValue(getTypeSlot(*It++), Oprnds[i]));
}
if (It != FTy->param_end())
error("Invalid invoke instruction!");
} else {
Oprnds.erase(Oprnds.begin(), Oprnds.begin()+1);
Normal = getBasicBlock(Oprnds[0]);
Except = getBasicBlock(Oprnds[1]);
unsigned FirstVariableArgument = FTy->getNumParams()+2;
for (unsigned i = 2; i != FirstVariableArgument; ++i)
Params.push_back(getValue(getTypeSlot(FTy->getParamType(i-2)),
Oprnds[i]));
// Must be type/value pairs. If not, error out.
if (Oprnds.size()-FirstVariableArgument & 1)
error("Invalid invoke instruction!");
for (unsigned i = FirstVariableArgument; i < Oprnds.size(); i += 2)
Params.push_back(getValue(Oprnds[i], Oprnds[i+1]));
}
Result = new InvokeInst(F, Normal, Except, Params);
if (CallingConv) cast<InvokeInst>(Result)->setCallingConv(CallingConv);
break;
}
case Instruction::Malloc: {
unsigned Align = 0;
if (Oprnds.size() == 2)
Align = (1 << Oprnds[1]) >> 1;
else if (Oprnds.size() > 2)
error("Invalid malloc instruction!");
if (!isa<PointerType>(InstTy))
error("Invalid malloc instruction!");
Result = new MallocInst(cast<PointerType>(InstTy)->getElementType(),
getValue(Type::UIntTyID, Oprnds[0]), Align);
break;
}
case Instruction::Alloca: {
unsigned Align = 0;
if (Oprnds.size() == 2)
Align = (1 << Oprnds[1]) >> 1;
else if (Oprnds.size() > 2)
error("Invalid alloca instruction!");
if (!isa<PointerType>(InstTy))
error("Invalid alloca instruction!");
Result = new AllocaInst(cast<PointerType>(InstTy)->getElementType(),
getValue(Type::UIntTyID, Oprnds[0]), Align);
break;
}
case Instruction::Free:
if (!isa<PointerType>(InstTy))
error("Invalid free instruction!");
Result = new FreeInst(getValue(iType, Oprnds[0]));
break;
case Instruction::GetElementPtr: {
if (Oprnds.size() == 0 || !isa<PointerType>(InstTy))
error("Invalid getelementptr instruction!");
std::vector<Value*> Idx;
const Type *NextTy = InstTy;
for (unsigned i = 1, e = Oprnds.size(); i != e; ++i) {
const CompositeType *TopTy = dyn_cast_or_null<CompositeType>(NextTy);
if (!TopTy)
error("Invalid getelementptr instruction!");
unsigned ValIdx = Oprnds[i];
unsigned IdxTy = 0;
// Struct indices are always uints, sequential type indices can be
// any of the 32 or 64-bit integer types. The actual choice of
// type is encoded in the low two bits of the slot number.
if (isa<StructType>(TopTy))
IdxTy = Type::UIntTyID;
else {
switch (ValIdx & 3) {
default:
case 0: IdxTy = Type::UIntTyID; break;
case 1: IdxTy = Type::IntTyID; break;
case 2: IdxTy = Type::ULongTyID; break;
case 3: IdxTy = Type::LongTyID; break;
}
ValIdx >>= 2;
}
Idx.push_back(getValue(IdxTy, ValIdx));
NextTy = GetElementPtrInst::getIndexedType(InstTy, Idx, true);
}
Result = new GetElementPtrInst(getValue(iType, Oprnds[0]), Idx);
break;
}
case 62: // volatile load
case Instruction::Load:
if (Oprnds.size() != 1 || !isa<PointerType>(InstTy))
error("Invalid load instruction!");
Result = new LoadInst(getValue(iType, Oprnds[0]), "", Opcode == 62);
break;
case 63: // volatile store
case Instruction::Store: {
if (!isa<PointerType>(InstTy) || Oprnds.size() != 2)
error("Invalid store instruction!");
Value *Ptr = getValue(iType, Oprnds[1]);
const Type *ValTy = cast<PointerType>(Ptr->getType())->getElementType();
Result = new StoreInst(getValue(getTypeSlot(ValTy), Oprnds[0]), Ptr,
Opcode == 63);
break;
}
case Instruction::Unwind:
if (Oprnds.size() != 0) error("Invalid unwind instruction!");
Result = new UnwindInst();
break;
case Instruction::Unreachable:
if (Oprnds.size() != 0) error("Invalid unreachable instruction!");
Result = new UnreachableInst();
break;
} // end switch(Opcode)
} // end if *normal*
BB->getInstList().push_back(Result);
unsigned TypeSlot;
if (Result->getType() == InstTy)
TypeSlot = iType;
else
TypeSlot = getTypeSlot(Result->getType());
insertValue(Result, TypeSlot, FunctionValues);
}
/// Get a particular numbered basic block, which might be a forward reference.
/// This works together with ParseInstructionList to handle these forward
/// references in a clean manner. This function is used when constructing
/// phi, br, switch, and other instructions that reference basic blocks.
/// Blocks are numbered sequentially as they appear in the function.
BasicBlock *BytecodeReader::getBasicBlock(unsigned ID) {
// Make sure there is room in the table...
if (ParsedBasicBlocks.size() <= ID) ParsedBasicBlocks.resize(ID+1);
// First check to see if this is a backwards reference, i.e. this block
// has already been created, or if the forward reference has already
// been created.
if (ParsedBasicBlocks[ID])
return ParsedBasicBlocks[ID];
// Otherwise, the basic block has not yet been created. Do so and add it to
// the ParsedBasicBlocks list.
return ParsedBasicBlocks[ID] = new BasicBlock();
}
/// Parse all of the BasicBlock's & Instruction's in the body of a function.
/// In post 1.0 bytecode files, we no longer emit basic block individually,
/// in order to avoid per-basic-block overhead.
/// @returns the number of basic blocks encountered.
unsigned BytecodeReader::ParseInstructionList(Function* F) {
unsigned BlockNo = 0;
std::vector<unsigned> Args;
while (moreInBlock()) {
if (Handler) Handler->handleBasicBlockBegin(BlockNo);
BasicBlock *BB;
if (ParsedBasicBlocks.size() == BlockNo)
ParsedBasicBlocks.push_back(BB = new BasicBlock());
else if (ParsedBasicBlocks[BlockNo] == 0)
BB = ParsedBasicBlocks[BlockNo] = new BasicBlock();
else
BB = ParsedBasicBlocks[BlockNo];
++BlockNo;
F->getBasicBlockList().push_back(BB);
// Read instructions into this basic block until we get to a terminator
while (moreInBlock() && !BB->getTerminator())
ParseInstruction(Args, BB);
if (!BB->getTerminator())
error("Non-terminated basic block found!");
if (Handler) Handler->handleBasicBlockEnd(BlockNo-1);
}
return BlockNo;
}
/// Parse a symbol table. This works for both module level and function
/// level symbol tables. For function level symbol tables, the CurrentFunction
/// parameter must be non-zero and the ST parameter must correspond to
/// CurrentFunction's symbol table. For Module level symbol tables, the
/// CurrentFunction argument must be zero.
void BytecodeReader::ParseSymbolTable(Function *CurrentFunction,
SymbolTable *ST) {
if (Handler) Handler->handleSymbolTableBegin(CurrentFunction,ST);
// Allow efficient basic block lookup by number.
std::vector<BasicBlock*> BBMap;
if (CurrentFunction)
for (Function::iterator I = CurrentFunction->begin(),
E = CurrentFunction->end(); I != E; ++I)
BBMap.push_back(I);
// Symtab block header: [num entries]
unsigned NumEntries = read_vbr_uint();
for (unsigned i = 0; i < NumEntries; ++i) {
// Symtab entry: [def slot #][name]
unsigned slot = read_vbr_uint();
std::string Name = read_str();
const Type* T = getType(slot);
ST->insert(Name, T);
}
while (moreInBlock()) {
// Symtab block header: [num entries][type id number]
unsigned NumEntries = read_vbr_uint();
unsigned Typ = read_vbr_uint();
for (unsigned i = 0; i != NumEntries; ++i) {
// Symtab entry: [def slot #][name]
unsigned slot = read_vbr_uint();
std::string Name = read_str();
Value *V = 0;
if (Typ == Type::LabelTyID) {
if (slot < BBMap.size())
V = BBMap[slot];
} else {
V = getValue(Typ, slot, false); // Find mapping...
}
if (V == 0)
error("Failed value look-up for name '" + Name + "'");
V->setName(Name);
}
}
checkPastBlockEnd("Symbol Table");
if (Handler) Handler->handleSymbolTableEnd();
}
/// Read in the types portion of a compaction table.
void BytecodeReader::ParseCompactionTypes(unsigned NumEntries) {
for (unsigned i = 0; i != NumEntries; ++i) {
unsigned TypeSlot = read_vbr_uint();
const Type *Typ = getGlobalTableType(TypeSlot);
CompactionTypes.push_back(std::make_pair(Typ, TypeSlot));
if (Handler) Handler->handleCompactionTableType(i, TypeSlot, Typ);
}
}
/// Parse a compaction table.
void BytecodeReader::ParseCompactionTable() {
// Notify handler that we're beginning a compaction table.
if (Handler) Handler->handleCompactionTableBegin();
// Get the types for the compaction table.
unsigned NumEntries = read_vbr_uint();
ParseCompactionTypes(NumEntries);
// Compaction tables live in separate blocks so we have to loop
// until we've read the whole thing.
while (moreInBlock()) {
// Read the number of Value* entries in the compaction table
unsigned NumEntries = read_vbr_uint();
unsigned Ty = 0;
// Decode the type from value read in. Most compaction table
// planes will have one or two entries in them. If that's the
// case then the length is encoded in the bottom two bits and
// the higher bits encode the type. This saves another VBR value.
if ((NumEntries & 3) == 3) {
// In this case, both low-order bits are set (value 3). This
// is a signal that the typeid follows.
NumEntries >>= 2;
Ty = read_vbr_uint();
} else {
// In this case, the low-order bits specify the number of entries
// and the high order bits specify the type.
Ty = NumEntries >> 2;
NumEntries &= 3;
}
// Make sure we have enough room for the plane.
if (Ty >= CompactionValues.size())
CompactionValues.resize(Ty+1);
// Make sure the plane is empty or we have some kind of error.
if (!CompactionValues[Ty].empty())
error("Compaction table plane contains multiple entries!");
// Notify handler about the plane.
if (Handler) Handler->handleCompactionTablePlane(Ty, NumEntries);
// Push the implicit zero.
CompactionValues[Ty].push_back(Constant::getNullValue(getType(Ty)));
// Read in each of the entries, put them in the compaction table
// and notify the handler that we have a new compaction table value.
for (unsigned i = 0; i != NumEntries; ++i) {
unsigned ValSlot = read_vbr_uint();
Value *V = getGlobalTableValue(Ty, ValSlot);
CompactionValues[Ty].push_back(V);
if (Handler) Handler->handleCompactionTableValue(i, Ty, ValSlot);
}
}
// Notify handler that the compaction table is done.
if (Handler) Handler->handleCompactionTableEnd();
}
// Parse a single type. The typeid is read in first. If its a primitive type
// then nothing else needs to be read, we know how to instantiate it. If its
// a derived type, then additional data is read to fill out the type
// definition.
const Type *BytecodeReader::ParseType() {
unsigned PrimType = read_vbr_uint();
const Type *Result = 0;
if ((Result = Type::getPrimitiveType((Type::TypeID)PrimType)))
return Result;
switch (PrimType) {
case Type::FunctionTyID: {
const Type *RetType = readType();
unsigned NumParams = read_vbr_uint();
std::vector<const Type*> Params;
while (NumParams--)
Params.push_back(readType());
bool isVarArg = Params.size() && Params.back() == Type::VoidTy;
if (isVarArg) Params.pop_back();
Result = FunctionType::get(RetType, Params, isVarArg);
break;
}
case Type::ArrayTyID: {
const Type *ElementType = readType();
unsigned NumElements = read_vbr_uint();
Result = ArrayType::get(ElementType, NumElements);
break;
}
case Type::PackedTyID: {
const Type *ElementType = readType();
unsigned NumElements = read_vbr_uint();
Result = PackedType::get(ElementType, NumElements);
break;
}
case Type::StructTyID: {
std::vector<const Type*> Elements;
unsigned Typ = read_vbr_uint();
while (Typ) { // List is terminated by void/0 typeid
Elements.push_back(getType(Typ));
Typ = read_vbr_uint();
}
Result = StructType::get(Elements);
break;
}
case Type::PointerTyID: {
Result = PointerType::get(readType());
break;
}
case Type::OpaqueTyID: {
Result = OpaqueType::get();
break;
}
default:
error("Don't know how to deserialize primitive type " + utostr(PrimType));
break;
}
if (Handler) Handler->handleType(Result);
return Result;
}
// ParseTypes - We have to use this weird code to handle recursive
// types. We know that recursive types will only reference the current slab of
// values in the type plane, but they can forward reference types before they
// have been read. For example, Type #0 might be '{ Ty#1 }' and Type #1 might
// be 'Ty#0*'. When reading Type #0, type number one doesn't exist. To fix
// this ugly problem, we pessimistically insert an opaque type for each type we
// are about to read. This means that forward references will resolve to
// something and when we reread the type later, we can replace the opaque type
// with a new resolved concrete type.
//
void BytecodeReader::ParseTypes(TypeListTy &Tab, unsigned NumEntries){
assert(Tab.size() == 0 && "should not have read type constants in before!");
// Insert a bunch of opaque types to be resolved later...
Tab.reserve(NumEntries);
for (unsigned i = 0; i != NumEntries; ++i)
Tab.push_back(OpaqueType::get());
if (Handler)
Handler->handleTypeList(NumEntries);
// If we are about to resolve types, make sure the type cache is clear.
if (NumEntries)
ModuleTypeIDCache.clear();
// Loop through reading all of the types. Forward types will make use of the
// opaque types just inserted.
//
for (unsigned i = 0; i != NumEntries; ++i) {
const Type* NewTy = ParseType();
const Type* OldTy = Tab[i].get();
if (NewTy == 0)
error("Couldn't parse type!");
// Don't directly push the new type on the Tab. Instead we want to replace
// the opaque type we previously inserted with the new concrete value. This
// approach helps with forward references to types. The refinement from the
// abstract (opaque) type to the new type causes all uses of the abstract
// type to use the concrete type (NewTy). This will also cause the opaque
// type to be deleted.
cast<DerivedType>(const_cast<Type*>(OldTy))->refineAbstractTypeTo(NewTy);
// This should have replaced the old opaque type with the new type in the
// value table... or with a preexisting type that was already in the system.
// Let's just make sure it did.
assert(Tab[i] != OldTy && "refineAbstractType didn't work!");
}
}
// Upgrade obsolete constant expression opcodes (ver. 5 and prior) to the new
// values used after ver 6. bytecode format. The operands are provided to the
// function so that decisions based on the operand type can be made when
// auto-upgrading obsolete opcodes to the new ones.
// NOTE: This code needs to be kept synchronized with upgradeInstrOpcodes.
// We can't use that function because of that functions argument requirements.
// This function only deals with the subset of opcodes that are applicable to
// constant expressions and is therefore simpler than upgradeInstrOpcodes.
inline unsigned BytecodeReader::upgradeCEOpcodes(
unsigned Opcode, const std::vector<Constant*> &ArgVec
) {
// Determine if no upgrade necessary
if (!hasSignlessDivRem && !hasSignlessShrCastSetcc)
return Opcode;
// If this is bytecode version 6, that only had signed Rem and Div
// instructions, then we must compensate for those two instructions only.
// So that the switch statement below works, we're trying to turn this into
// a version 5 opcode. To do that we must adjust the opcode to 10 (Div) if its
// any of the UDiv, SDiv or FDiv instructions; or, adjust the opcode to
// 11 (Rem) if its any of the URem, SRem, or FRem instructions; or, simply
// decrement the instruction code if its beyond FRem.
if (!hasSignlessDivRem) {
// If its one of the signed Div/Rem opcodes, its fine the way it is
if (Opcode >= 10 && Opcode <= 12) // UDiv through FDiv
Opcode = 10; // Div
else if (Opcode >=13 && Opcode <= 15) // URem through FRem
Opcode = 11; // Rem
else if (Opcode > 15) // Everything above FRem
// Adjust for new instruction codes
Opcode -= 4;
}
switch (Opcode) {
default: // Pass Through
// If we don't match any of the cases here then the opcode is fine the
// way it is.
break;
case 7: // Add
Opcode = Instruction::Add;
break;
case 8: // Sub
Opcode = Instruction::Sub;
break;
case 9: // Mul
Opcode = Instruction::Mul;
break;
case 10: // Div
// The type of the instruction is based on the operands. We need to select
// either udiv or sdiv based on that type. This expression selects the
// cases where the type is floating point or signed in which case we
// generated an sdiv instruction.
if (ArgVec[0]->getType()->isFloatingPoint())
Opcode = Instruction::FDiv;
else if (ArgVec[0]->getType()->isSigned())
Opcode = Instruction::SDiv;
else
Opcode = Instruction::UDiv;
break;
case 11: // Rem
// As with "Div", make the signed/unsigned or floating point Rem
// instruction choice based on the type of the operands.
if (ArgVec[0]->getType()->isFloatingPoint())
Opcode = Instruction::FRem;
else if (ArgVec[0]->getType()->isSigned())
Opcode = Instruction::SRem;
else
Opcode = Instruction::URem;
break;
case 12: // And
Opcode = Instruction::And;
break;
case 13: // Or
Opcode = Instruction::Or;
break;
case 14: // Xor
Opcode = Instruction::Xor;
break;
case 15: // SetEQ
Opcode = Instruction::SetEQ;
break;
case 16: // SetNE
Opcode = Instruction::SetNE;
break;
case 17: // SetLE
Opcode = Instruction::SetLE;
break;
case 18: // SetGE
Opcode = Instruction::SetGE;
break;
case 19: // SetLT
Opcode = Instruction::SetLT;
break;
case 20: // SetGT
Opcode = Instruction::SetGT;
break;
case 26: // GetElementPtr
Opcode = Instruction::GetElementPtr;
break;
case 28: // Cast
Opcode = Instruction::Cast;
break;
case 30: // Shl
Opcode = Instruction::Shl;
break;
case 31: // Shr
if (ArgVec[0]->getType()->isSigned())
Opcode = Instruction::AShr;
else
Opcode = Instruction::LShr;
break;
case 34: // Select
Opcode = Instruction::Select;
break;
case 38: // ExtractElement
Opcode = Instruction::ExtractElement;
break;
case 39: // InsertElement
Opcode = Instruction::InsertElement;
break;
case 40: // ShuffleVector
Opcode = Instruction::ShuffleVector;
break;
}
return Opcode;
}
/// Parse a single constant value
Value *BytecodeReader::ParseConstantPoolValue(unsigned TypeID) {
// We must check for a ConstantExpr before switching by type because
// a ConstantExpr can be of any type, and has no explicit value.
//
// 0 if not expr; numArgs if is expr
unsigned isExprNumArgs = read_vbr_uint();
if (isExprNumArgs) {
// 'undef' is encoded with 'exprnumargs' == 1.
if (isExprNumArgs == 1)
return UndefValue::get(getType(TypeID));
// Inline asm is encoded with exprnumargs == ~0U.
if (isExprNumArgs == ~0U) {
std::string AsmStr = read_str();
std::string ConstraintStr = read_str();
unsigned Flags = read_vbr_uint();
const PointerType *PTy = dyn_cast<PointerType>(getType(TypeID));
const FunctionType *FTy =
PTy ? dyn_cast<FunctionType>(PTy->getElementType()) : 0;
if (!FTy || !InlineAsm::Verify(FTy, ConstraintStr))
error("Invalid constraints for inline asm");
if (Flags & ~1U)
error("Invalid flags for inline asm");
bool HasSideEffects = Flags & 1;
return InlineAsm::get(FTy, AsmStr, ConstraintStr, HasSideEffects);
}
--isExprNumArgs;
// FIXME: Encoding of constant exprs could be much more compact!
std::vector<Constant*> ArgVec;
ArgVec.reserve(isExprNumArgs);
unsigned Opcode = read_vbr_uint();
// Read the slot number and types of each of the arguments
for (unsigned i = 0; i != isExprNumArgs; ++i) {
unsigned ArgValSlot = read_vbr_uint();
unsigned ArgTypeSlot = read_vbr_uint();
// Get the arg value from its slot if it exists, otherwise a placeholder
ArgVec.push_back(getConstantValue(ArgTypeSlot, ArgValSlot));
}
// Handle backwards compatibility for the opcode numbers
Opcode = upgradeCEOpcodes(Opcode, ArgVec);
// Construct a ConstantExpr of the appropriate kind
if (isExprNumArgs == 1) { // All one-operand expressions
if (Opcode != Instruction::Cast)
error("Only cast instruction has one argument for ConstantExpr");
Constant* Result = ConstantExpr::getCast(ArgVec[0], getType(TypeID));
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else if (Opcode == Instruction::GetElementPtr) { // GetElementPtr
std::vector<Constant*> IdxList(ArgVec.begin()+1, ArgVec.end());
Constant* Result = ConstantExpr::getGetElementPtr(ArgVec[0], IdxList);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else if (Opcode == Instruction::Select) {
if (ArgVec.size() != 3)
error("Select instruction must have three arguments.");
Constant* Result = ConstantExpr::getSelect(ArgVec[0], ArgVec[1],
ArgVec[2]);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else if (Opcode == Instruction::ExtractElement) {
if (ArgVec.size() != 2 ||
!ExtractElementInst::isValidOperands(ArgVec[0], ArgVec[1]))
error("Invalid extractelement constand expr arguments");
Constant* Result = ConstantExpr::getExtractElement(ArgVec[0], ArgVec[1]);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else if (Opcode == Instruction::InsertElement) {
if (ArgVec.size() != 3 ||
!InsertElementInst::isValidOperands(ArgVec[0], ArgVec[1], ArgVec[2]))
error("Invalid insertelement constand expr arguments");
Constant *Result =
ConstantExpr::getInsertElement(ArgVec[0], ArgVec[1], ArgVec[2]);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else if (Opcode == Instruction::ShuffleVector) {
if (ArgVec.size() != 3 ||
!ShuffleVectorInst::isValidOperands(ArgVec[0], ArgVec[1], ArgVec[2]))
error("Invalid shufflevector constant expr arguments.");
Constant *Result =
ConstantExpr::getShuffleVector(ArgVec[0], ArgVec[1], ArgVec[2]);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
} else { // All other 2-operand expressions
Constant* Result = ConstantExpr::get(Opcode, ArgVec[0], ArgVec[1]);
if (Handler) Handler->handleConstantExpression(Opcode, ArgVec, Result);
return Result;
}
}
// Ok, not an ConstantExpr. We now know how to read the given type...
const Type *Ty = getType(TypeID);
Constant *Result = 0;
switch (Ty->getTypeID()) {
case Type::BoolTyID: {
unsigned Val = read_vbr_uint();
if (Val != 0 && Val != 1)
error("Invalid boolean value read.");
Result = ConstantBool::get(Val == 1);
if (Handler) Handler->handleConstantValue(Result);
break;
}
case Type::UByteTyID: // Unsigned integer types...
case Type::UShortTyID:
case Type::UIntTyID: {
unsigned Val = read_vbr_uint();
if (!ConstantInt::isValueValidForType(Ty, uint64_t(Val)))
error("Invalid unsigned byte/short/int read.");
Result = ConstantInt::get(Ty, Val);
if (Handler) Handler->handleConstantValue(Result);
break;
}
case Type::ULongTyID:
Result = ConstantInt::get(Ty, read_vbr_uint64());
if (Handler) Handler->handleConstantValue(Result);
break;
case Type::SByteTyID: // Signed integer types...
case Type::ShortTyID:
case Type::IntTyID:
case Type::LongTyID: {
int64_t Val = read_vbr_int64();
if (!ConstantInt::isValueValidForType(Ty, Val))
error("Invalid signed byte/short/int/long read.");
Result = ConstantInt::get(Ty, Val);
if (Handler) Handler->handleConstantValue(Result);
break;
}
case Type::FloatTyID: {
float Val;
read_float(Val);
Result = ConstantFP::get(Ty, Val);
if (Handler) Handler->handleConstantValue(Result);
break;
}
case Type::DoubleTyID: {
double Val;
read_double(Val);
Result = ConstantFP::get(Ty, Val);
if (Handler) Handler->handleConstantValue(Result);
break;
}
case Type::ArrayTyID: {
const ArrayType *AT = cast<ArrayType>(Ty);
unsigned NumElements = AT->getNumElements();
unsigned TypeSlot = getTypeSlot(AT->getElementType());
std::vector<Constant*> Elements;
Elements.reserve(NumElements);
while (NumElements--) // Read all of the elements of the constant.
Elements.push_back(getConstantValue(TypeSlot,
read_vbr_uint()));
Result = ConstantArray::get(AT, Elements);
if (Handler) Handler->handleConstantArray(AT, Elements, TypeSlot, Result);
break;
}
case Type::StructTyID: {
const StructType *ST = cast<StructType>(Ty);
std::vector<Constant *> Elements;
Elements.reserve(ST->getNumElements());
for (unsigned i = 0; i != ST->getNumElements(); ++i)
Elements.push_back(getConstantValue(ST->getElementType(i),
read_vbr_uint()));
Result = ConstantStruct::get(ST, Elements);
if (Handler) Handler->handleConstantStruct(ST, Elements, Result);
break;
}
case Type::PackedTyID: {
const PackedType *PT = cast<PackedType>(Ty);
unsigned NumElements = PT->getNumElements();
unsigned TypeSlot = getTypeSlot(PT->getElementType());
std::vector<Constant*> Elements;
Elements.reserve(NumElements);
while (NumElements--) // Read all of the elements of the constant.
Elements.push_back(getConstantValue(TypeSlot,
read_vbr_uint()));
Result = ConstantPacked::get(PT, Elements);
if (Handler) Handler->handleConstantPacked(PT, Elements, TypeSlot, Result);
break;
}
case Type::PointerTyID: { // ConstantPointerRef value (backwards compat).
const PointerType *PT = cast<PointerType>(Ty);
unsigned Slot = read_vbr_uint();
// Check to see if we have already read this global variable...
Value *Val = getValue(TypeID, Slot, false);
if (Val) {
GlobalValue *GV = dyn_cast<GlobalValue>(Val);
if (!GV) error("GlobalValue not in ValueTable!");
if (Handler) Handler->handleConstantPointer(PT, Slot, GV);
return GV;
} else {
error("Forward references are not allowed here.");
}
}
default:
error("Don't know how to deserialize constant value of type '" +
Ty->getDescription());
break;
}
// Check that we didn't read a null constant if they are implicit for this
// type plane. Do not do this check for constantexprs, as they may be folded
// to a null value in a way that isn't predicted when a .bc file is initially
// produced.
assert((!isa<Constant>(Result) || !cast<Constant>(Result)->isNullValue()) ||
!hasImplicitNull(TypeID) &&
"Cannot read null values from bytecode!");
return Result;
}
/// Resolve references for constants. This function resolves the forward
/// referenced constants in the ConstantFwdRefs map. It uses the
/// replaceAllUsesWith method of Value class to substitute the placeholder
/// instance with the actual instance.
void BytecodeReader::ResolveReferencesToConstant(Constant *NewV, unsigned Typ,
unsigned Slot) {
ConstantRefsType::iterator I =
ConstantFwdRefs.find(std::make_pair(Typ, Slot));
if (I == ConstantFwdRefs.end()) return; // Never forward referenced?
Value *PH = I->second; // Get the placeholder...
PH->replaceAllUsesWith(NewV);
delete PH; // Delete the old placeholder
ConstantFwdRefs.erase(I); // Remove the map entry for it
}
/// Parse the constant strings section.
void BytecodeReader::ParseStringConstants(unsigned NumEntries, ValueTable &Tab){
for (; NumEntries; --NumEntries) {
unsigned Typ = read_vbr_uint();
const Type *Ty = getType(Typ);
if (!isa<ArrayType>(Ty))
error("String constant data invalid!");
const ArrayType *ATy = cast<ArrayType>(Ty);
if (ATy->getElementType() != Type::SByteTy &&
ATy->getElementType() != Type::UByteTy)
error("String constant data invalid!");
// Read character data. The type tells us how long the string is.
char *Data = reinterpret_cast<char *>(alloca(ATy->getNumElements()));
read_data(Data, Data+ATy->getNumElements());
std::vector<Constant*> Elements(ATy->getNumElements());
const Type* ElemType = ATy->getElementType();
for (unsigned i = 0, e = ATy->getNumElements(); i != e; ++i)
Elements[i] = ConstantInt::get(ElemType, (unsigned char)Data[i]);
// Create the constant, inserting it as needed.
Constant *C = ConstantArray::get(ATy, Elements);
unsigned Slot = insertValue(C, Typ, Tab);
ResolveReferencesToConstant(C, Typ, Slot);
if (Handler) Handler->handleConstantString(cast<ConstantArray>(C));
}
}
/// Parse the constant pool.
void BytecodeReader::ParseConstantPool(ValueTable &Tab,
TypeListTy &TypeTab,
bool isFunction) {
if (Handler) Handler->handleGlobalConstantsBegin();
/// In LLVM 1.3 Type does not derive from Value so the types
/// do not occupy a plane. Consequently, we read the types
/// first in the constant pool.
if (isFunction) {
unsigned NumEntries = read_vbr_uint();
ParseTypes(TypeTab, NumEntries);
}
while (moreInBlock()) {
unsigned NumEntries = read_vbr_uint();
unsigned Typ = read_vbr_uint();
if (Typ == Type::VoidTyID) {
/// Use of Type::VoidTyID is a misnomer. It actually means
/// that the following plane is constant strings
assert(&Tab == &ModuleValues && "Cannot read strings in functions!");
ParseStringConstants(NumEntries, Tab);
} else {
for (unsigned i = 0; i < NumEntries; ++i) {
Value *V = ParseConstantPoolValue(Typ);
assert(V && "ParseConstantPoolValue returned NULL!");
unsigned Slot = insertValue(V, Typ, Tab);
// If we are reading a function constant table, make sure that we adjust
// the slot number to be the real global constant number.
//
if (&Tab != &ModuleValues && Typ < ModuleValues.size() &&
ModuleValues[Typ])
Slot += ModuleValues[Typ]->size();
if (Constant *C = dyn_cast<Constant>(V))
ResolveReferencesToConstant(C, Typ, Slot);
}
}
}
// After we have finished parsing the constant pool, we had better not have
// any dangling references left.
if (!ConstantFwdRefs.empty()) {
ConstantRefsType::const_iterator I = ConstantFwdRefs.begin();
Constant* missingConst = I->second;
error(utostr(ConstantFwdRefs.size()) +
" unresolved constant reference exist. First one is '" +
missingConst->getName() + "' of type '" +
missingConst->getType()->getDescription() + "'.");
}
checkPastBlockEnd("Constant Pool");
if (Handler) Handler->handleGlobalConstantsEnd();
}
/// Parse the contents of a function. Note that this function can be
/// called lazily by materializeFunction
/// @see materializeFunction
void BytecodeReader::ParseFunctionBody(Function* F) {
unsigned FuncSize = BlockEnd - At;
GlobalValue::LinkageTypes Linkage = GlobalValue::ExternalLinkage;
unsigned LinkageType = read_vbr_uint();
switch (LinkageType) {
case 0: Linkage = GlobalValue::ExternalLinkage; break;
case 1: Linkage = GlobalValue::WeakLinkage; break;
case 2: Linkage = GlobalValue::AppendingLinkage; break;
case 3: Linkage = GlobalValue::InternalLinkage; break;
case 4: Linkage = GlobalValue::LinkOnceLinkage; break;
case 5: Linkage = GlobalValue::DLLImportLinkage; break;
case 6: Linkage = GlobalValue::DLLExportLinkage; break;
case 7: Linkage = GlobalValue::ExternalWeakLinkage; break;
default:
error("Invalid linkage type for Function.");
Linkage = GlobalValue::InternalLinkage;
break;
}
F->setLinkage(Linkage);
if (Handler) Handler->handleFunctionBegin(F,FuncSize);
// Keep track of how many basic blocks we have read in...
unsigned BlockNum = 0;
bool InsertedArguments = false;
BufPtr MyEnd = BlockEnd;
while (At < MyEnd) {
unsigned Type, Size;
BufPtr OldAt = At;
read_block(Type, Size);
switch (Type) {
case BytecodeFormat::ConstantPoolBlockID:
if (!InsertedArguments) {
// Insert arguments into the value table before we parse the first basic
// block in the function, but after we potentially read in the
// compaction table.
insertArguments(F);
InsertedArguments = true;
}
ParseConstantPool(FunctionValues, FunctionTypes, true);
break;
case BytecodeFormat::CompactionTableBlockID:
ParseCompactionTable();
break;
case BytecodeFormat::InstructionListBlockID: {
// Insert arguments into the value table before we parse the instruction
// list for the function, but after we potentially read in the compaction
// table.
if (!InsertedArguments) {
insertArguments(F);
InsertedArguments = true;
}
if (BlockNum)
error("Already parsed basic blocks!");
BlockNum = ParseInstructionList(F);
break;
}
case BytecodeFormat::SymbolTableBlockID:
ParseSymbolTable(F, &F->getSymbolTable());
break;
default:
At += Size;
if (OldAt > At)
error("Wrapped around reading bytecode.");
break;
}
BlockEnd = MyEnd;
}
// Make sure there were no references to non-existant basic blocks.
if (BlockNum != ParsedBasicBlocks.size())
error("Illegal basic block operand reference");
ParsedBasicBlocks.clear();
// Resolve forward references. Replace any uses of a forward reference value
// with the real value.
while (!ForwardReferences.empty()) {
std::map<std::pair<unsigned,unsigned>, Value*>::iterator
I = ForwardReferences.begin();
Value *V = getValue(I->first.first, I->first.second, false);
Value *PlaceHolder = I->second;
PlaceHolder->replaceAllUsesWith(V);
ForwardReferences.erase(I);
delete PlaceHolder;
}
// If upgraded intrinsic functions were detected during reading of the
// module information, then we need to look for instructions that need to
// be upgraded. This can't be done while the instructions are read in because
// additional instructions inserted mess up the slot numbering.
if (!upgradedFunctions.empty()) {
for (Function::iterator BI = F->begin(), BE = F->end(); BI != BE; ++BI)
for (BasicBlock::iterator II = BI->begin(), IE = BI->end();
II != IE;)
if (CallInst* CI = dyn_cast<CallInst>(II++)) {
std::map<Function*,Function*>::iterator FI =
upgradedFunctions.find(CI->getCalledFunction());
if (FI != upgradedFunctions.end())
UpgradeIntrinsicCall(CI, FI->second);
}
}
// Clear out function-level types...
FunctionTypes.clear();
CompactionTypes.clear();
CompactionValues.clear();
freeTable(FunctionValues);
if (Handler) Handler->handleFunctionEnd(F);
}
/// This function parses LLVM functions lazily. It obtains the type of the
/// function and records where the body of the function is in the bytecode
/// buffer. The caller can then use the ParseNextFunction and
/// ParseAllFunctionBodies to get handler events for the functions.
void BytecodeReader::ParseFunctionLazily() {
if (FunctionSignatureList.empty())
error("FunctionSignatureList empty!");
Function *Func = FunctionSignatureList.back();
FunctionSignatureList.pop_back();
// Save the information for future reading of the function
LazyFunctionLoadMap[Func] = LazyFunctionInfo(BlockStart, BlockEnd);
// This function has a body but it's not loaded so it appears `External'.
// Mark it as a `Ghost' instead to notify the users that it has a body.
Func->setLinkage(GlobalValue::GhostLinkage);
// Pretend we've `parsed' this function
At = BlockEnd;
}
/// The ParserFunction method lazily parses one function. Use this method to
/// casue the parser to parse a specific function in the module. Note that
/// this will remove the function from what is to be included by
/// ParseAllFunctionBodies.
/// @see ParseAllFunctionBodies
/// @see ParseBytecode
bool BytecodeReader::ParseFunction(Function* Func, std::string* ErrMsg) {
if (setjmp(context))
return true;
// Find {start, end} pointers and slot in the map. If not there, we're done.
LazyFunctionMap::iterator Fi = LazyFunctionLoadMap.find(Func);
// Make sure we found it
if (Fi == LazyFunctionLoadMap.end()) {
error("Unrecognized function of type " + Func->getType()->getDescription());
return true;
}
BlockStart = At = Fi->second.Buf;
BlockEnd = Fi->second.EndBuf;
assert(Fi->first == Func && "Found wrong function?");
LazyFunctionLoadMap.erase(Fi);
this->ParseFunctionBody(Func);
return false;
}
/// The ParseAllFunctionBodies method parses through all the previously
/// unparsed functions in the bytecode file. If you want to completely parse
/// a bytecode file, this method should be called after Parsebytecode because
/// Parsebytecode only records the locations in the bytecode file of where
/// the function definitions are located. This function uses that information
/// to materialize the functions.
/// @see ParseBytecode
bool BytecodeReader::ParseAllFunctionBodies(std::string* ErrMsg) {
if (setjmp(context))
return true;
LazyFunctionMap::iterator Fi = LazyFunctionLoadMap.begin();
LazyFunctionMap::iterator Fe = LazyFunctionLoadMap.end();
while (Fi != Fe) {
Function* Func = Fi->first;
BlockStart = At = Fi->second.Buf;
BlockEnd = Fi->second.EndBuf;
ParseFunctionBody(Func);
++Fi;
}
LazyFunctionLoadMap.clear();
return false;
}
/// Parse the global type list
void BytecodeReader::ParseGlobalTypes() {
// Read the number of types
unsigned NumEntries = read_vbr_uint();
ParseTypes(ModuleTypes, NumEntries);
}
/// Parse the Global info (types, global vars, constants)
void BytecodeReader::ParseModuleGlobalInfo() {
if (Handler) Handler->handleModuleGlobalsBegin();
// SectionID - If a global has an explicit section specified, this map
// remembers the ID until we can translate it into a string.
std::map<GlobalValue*, unsigned> SectionID;
// Read global variables...
unsigned VarType = read_vbr_uint();
while (VarType != Type::VoidTyID) { // List is terminated by Void
// VarType Fields: bit0 = isConstant, bit1 = hasInitializer, bit2,3,4 =
// Linkage, bit4+ = slot#
unsigned SlotNo = VarType >> 5;
unsigned LinkageID = (VarType >> 2) & 7;
bool isConstant = VarType & 1;
bool hasInitializer = (VarType & 2) != 0;
unsigned Alignment = 0;
unsigned GlobalSectionID = 0;
// An extension word is present when linkage = 3 (internal) and hasinit = 0.
if (LinkageID == 3 && !hasInitializer) {
unsigned ExtWord = read_vbr_uint();
// The extension word has this format: bit 0 = has initializer, bit 1-3 =
// linkage, bit 4-8 = alignment (log2), bits 10+ = future use.
hasInitializer = ExtWord & 1;
LinkageID = (ExtWord >> 1) & 7;
Alignment = (1 << ((ExtWord >> 4) & 31)) >> 1;
if (ExtWord & (1 << 9)) // Has a section ID.
GlobalSectionID = read_vbr_uint();
}
GlobalValue::LinkageTypes Linkage;
switch (LinkageID) {
case 0: Linkage = GlobalValue::ExternalLinkage; break;
case 1: Linkage = GlobalValue::WeakLinkage; break;
case 2: Linkage = GlobalValue::AppendingLinkage; break;
case 3: Linkage = GlobalValue::InternalLinkage; break;
case 4: Linkage = GlobalValue::LinkOnceLinkage; break;
case 5: Linkage = GlobalValue::DLLImportLinkage; break;
case 6: Linkage = GlobalValue::DLLExportLinkage; break;
case 7: Linkage = GlobalValue::ExternalWeakLinkage; break;
default:
error("Unknown linkage type: " + utostr(LinkageID));
Linkage = GlobalValue::InternalLinkage;
break;
}
const Type *Ty = getType(SlotNo);
if (!Ty)
error("Global has no type! SlotNo=" + utostr(SlotNo));
if (!isa<PointerType>(Ty))
error("Global not a pointer type! Ty= " + Ty->getDescription());
const Type *ElTy = cast<PointerType>(Ty)->getElementType();
// Create the global variable...
GlobalVariable *GV = new GlobalVariable(ElTy, isConstant, Linkage,
0, "", TheModule);
GV->setAlignment(Alignment);
insertValue(GV, SlotNo, ModuleValues);
if (GlobalSectionID != 0)
SectionID[GV] = GlobalSectionID;
unsigned initSlot = 0;
if (hasInitializer) {
initSlot = read_vbr_uint();
GlobalInits.push_back(std::make_pair(GV, initSlot));
}
// Notify handler about the global value.
if (Handler)
Handler->handleGlobalVariable(ElTy, isConstant, Linkage, SlotNo,initSlot);
// Get next item
VarType = read_vbr_uint();
}
// Read the function objects for all of the functions that are coming
unsigned FnSignature = read_vbr_uint();
// List is terminated by VoidTy.
while (((FnSignature & (~0U >> 1)) >> 5) != Type::VoidTyID) {
const Type *Ty = getType((FnSignature & (~0U >> 1)) >> 5);
if (!isa<PointerType>(Ty) ||
!isa<FunctionType>(cast<PointerType>(Ty)->getElementType())) {
error("Function not a pointer to function type! Ty = " +
Ty->getDescription());
}
// We create functions by passing the underlying FunctionType to create...
const FunctionType* FTy =
cast<FunctionType>(cast<PointerType>(Ty)->getElementType());
// Insert the place holder.
Function *Func = new Function(FTy, GlobalValue::ExternalLinkage,
"", TheModule);
insertValue(Func, (FnSignature & (~0U >> 1)) >> 5, ModuleValues);
// Flags are not used yet.
unsigned Flags = FnSignature & 31;
// Save this for later so we know type of lazily instantiated functions.
// Note that known-external functions do not have FunctionInfo blocks, so we
// do not add them to the FunctionSignatureList.
if ((Flags & (1 << 4)) == 0)
FunctionSignatureList.push_back(Func);
// Get the calling convention from the low bits.
unsigned CC = Flags & 15;
unsigned Alignment = 0;
if (FnSignature & (1 << 31)) { // Has extension word?
unsigned ExtWord = read_vbr_uint();
Alignment = (1 << (ExtWord & 31)) >> 1;
CC |= ((ExtWord >> 5) & 15) << 4;
if (ExtWord & (1 << 10)) // Has a section ID.
SectionID[Func] = read_vbr_uint();
// Parse external declaration linkage
switch ((ExtWord >> 11) & 3) {
case 0: break;
case 1: Func->setLinkage(Function::DLLImportLinkage); break;
case 2: Func->setLinkage(Function::ExternalWeakLinkage); break;
default: assert(0 && "Unsupported external linkage");
}
}
Func->setCallingConv(CC-1);
Func->setAlignment(Alignment);
if (Handler) Handler->handleFunctionDeclaration(Func);
// Get the next function signature.
FnSignature = read_vbr_uint();
}
// Now that the function signature list is set up, reverse it so that we can
// remove elements efficiently from the back of the vector.
std::reverse(FunctionSignatureList.begin(), FunctionSignatureList.end());
/// SectionNames - This contains the list of section names encoded in the
/// moduleinfoblock. Functions and globals with an explicit section index
/// into this to get their section name.
std::vector<std::string> SectionNames;
// Read in the dependent library information.
unsigned num_dep_libs = read_vbr_uint();
std::string dep_lib;
while (num_dep_libs--) {
dep_lib = read_str();
TheModule->addLibrary(dep_lib);
if (Handler)
Handler->handleDependentLibrary(dep_lib);
}
// Read target triple and place into the module.
std::string triple = read_str();
TheModule->setTargetTriple(triple);
if (Handler)
Handler->handleTargetTriple(triple);
if (At != BlockEnd) {
// If the file has section info in it, read the section names now.
unsigned NumSections = read_vbr_uint();
while (NumSections--)
SectionNames.push_back(read_str());
}
// If the file has module-level inline asm, read it now.
if (At != BlockEnd)
TheModule->setModuleInlineAsm(read_str());
// If any globals are in specified sections, assign them now.
for (std::map<GlobalValue*, unsigned>::iterator I = SectionID.begin(), E =
SectionID.end(); I != E; ++I)
if (I->second) {
if (I->second > SectionID.size())
error("SectionID out of range for global!");
I->first->setSection(SectionNames[I->second-1]);
}
// This is for future proofing... in the future extra fields may be added that
// we don't understand, so we transparently ignore them.
//
At = BlockEnd;
if (Handler) Handler->handleModuleGlobalsEnd();
}
/// Parse the version information and decode it by setting flags on the
/// Reader that enable backward compatibility of the reader.
void BytecodeReader::ParseVersionInfo() {
unsigned Version = read_vbr_uint();
// Unpack version number: low four bits are for flags, top bits = version
Module::Endianness Endianness;
Module::PointerSize PointerSize;
Endianness = (Version & 1) ? Module::BigEndian : Module::LittleEndian;
PointerSize = (Version & 2) ? Module::Pointer64 : Module::Pointer32;
bool hasNoEndianness = Version & 4;
bool hasNoPointerSize = Version & 8;
RevisionNum = Version >> 4;
// Default the backwards compatibility flag values for the current BC version
hasSignlessDivRem = false;
hasSignlessShrCastSetcc = false;
// Determine which backwards compatibility flags to set based on the
// bytecode file's version number
switch (RevisionNum) {
case 0: // LLVM 1.0, 1.1 (Released)
case 1: // LLVM 1.2 (Released)
case 2: // 1.2.5 (Not Released)
case 3: // LLVM 1.3 (Released)
case 4: // 1.3.1 (Not Released)
error("Old bytecode formats no longer supported");
break;
case 5: // 1.4 (Released)
// In version 6, the Div and Rem instructions were converted to their
// signed and floating point counterparts: UDiv, SDiv, FDiv, URem, SRem,
// and FRem. Versions prior to 6 need to indicate that they have the
// signless Div and Rem instructions.
hasSignlessDivRem = true;
// FALL THROUGH
case 6: // 1.9 (Released)
// In version 5 and prior, instructions were signless while integer types
// were signed. In version 6, instructions became signed and types became
// signless. For example in version 5 we have the DIV instruction but in
// version 6 we have FDIV, SDIV and UDIV to replace it. This caused a
// renumbering of the instruction codes in version 6 that must be dealt with
// when reading old bytecode files.
hasSignlessShrCastSetcc = true;
// FALL THROUGH
case 7:
break;
default:
error("Unknown bytecode version number: " + itostr(RevisionNum));
}
if (hasNoEndianness) Endianness = Module::AnyEndianness;
if (hasNoPointerSize) PointerSize = Module::AnyPointerSize;
TheModule->setEndianness(Endianness);
TheModule->setPointerSize(PointerSize);
if (Handler) Handler->handleVersionInfo(RevisionNum, Endianness, PointerSize);
}
/// Parse a whole module.
void BytecodeReader::ParseModule() {
unsigned Type, Size;
FunctionSignatureList.clear(); // Just in case...
// Read into instance variables...
ParseVersionInfo();
bool SeenModuleGlobalInfo = false;
bool SeenGlobalTypePlane = false;
BufPtr MyEnd = BlockEnd;
while (At < MyEnd) {
BufPtr OldAt = At;
read_block(Type, Size);
switch (Type) {
case BytecodeFormat::GlobalTypePlaneBlockID:
if (SeenGlobalTypePlane)
error("Two GlobalTypePlane Blocks Encountered!");
if (Size > 0)
ParseGlobalTypes();
SeenGlobalTypePlane = true;
break;
case BytecodeFormat::ModuleGlobalInfoBlockID:
if (SeenModuleGlobalInfo)
error("Two ModuleGlobalInfo Blocks Encountered!");
ParseModuleGlobalInfo();
SeenModuleGlobalInfo = true;
break;
case BytecodeFormat::ConstantPoolBlockID:
ParseConstantPool(ModuleValues, ModuleTypes,false);
break;
case BytecodeFormat::FunctionBlockID:
ParseFunctionLazily();
break;
case BytecodeFormat::SymbolTableBlockID:
ParseSymbolTable(0, &TheModule->getSymbolTable());
break;
default:
At += Size;
if (OldAt > At) {
error("Unexpected Block of Type #" + utostr(Type) + " encountered!");
}
break;
}
BlockEnd = MyEnd;
}
// After the module constant pool has been read, we can safely initialize
// global variables...
while (!GlobalInits.empty()) {
GlobalVariable *GV = GlobalInits.back().first;
unsigned Slot = GlobalInits.back().second;
GlobalInits.pop_back();
// Look up the initializer value...
// FIXME: Preserve this type ID!
const llvm::PointerType* GVType = GV->getType();
unsigned TypeSlot = getTypeSlot(GVType->getElementType());
if (Constant *CV = getConstantValue(TypeSlot, Slot)) {
if (GV->hasInitializer())
error("Global *already* has an initializer?!");
if (Handler) Handler->handleGlobalInitializer(GV,CV);
GV->setInitializer(CV);
} else
error("Cannot find initializer value.");
}
if (!ConstantFwdRefs.empty())
error("Use of undefined constants in a module");
/// Make sure we pulled them all out. If we didn't then there's a declaration
/// but a missing body. That's not allowed.
if (!FunctionSignatureList.empty())
error("Function declared, but bytecode stream ended before definition");
}
/// This function completely parses a bytecode buffer given by the \p Buf
/// and \p Length parameters.
bool BytecodeReader::ParseBytecode(volatile BufPtr Buf, unsigned Length,
const std::string &ModuleID,
std::string* ErrMsg) {
/// We handle errors by
if (setjmp(context)) {
// Cleanup after error
if (Handler) Handler->handleError(ErrorMsg);
freeState();
delete TheModule;
TheModule = 0;
if (decompressedBlock != 0 ) {
::free(decompressedBlock);
decompressedBlock = 0;
}
// Set caller's error message, if requested
if (ErrMsg)
*ErrMsg = ErrorMsg;
// Indicate an error occurred
return true;
}
RevisionNum = 0;
At = MemStart = BlockStart = Buf;
MemEnd = BlockEnd = Buf + Length;
// Create the module
TheModule = new Module(ModuleID);
if (Handler) Handler->handleStart(TheModule, Length);
// Read the four bytes of the signature.
unsigned Sig = read_uint();
// If this is a compressed file
if (Sig == ('l' | ('l' << 8) | ('v' << 16) | ('c' << 24))) {
// Invoke the decompression of the bytecode. Note that we have to skip the
// file's magic number which is not part of the compressed block. Hence,
// the Buf+4 and Length-4. The result goes into decompressedBlock, a data
// member for retention until BytecodeReader is destructed.
unsigned decompressedLength = Compressor::decompressToNewBuffer(
(char*)Buf+4,Length-4,decompressedBlock);
// We must adjust the buffer pointers used by the bytecode reader to point
// into the new decompressed block. After decompression, the
// decompressedBlock will point to a contiguous memory area that has
// the decompressed data.
At = MemStart = BlockStart = Buf = (BufPtr) decompressedBlock;
MemEnd = BlockEnd = Buf + decompressedLength;
// else if this isn't a regular (uncompressed) bytecode file, then its
// and error, generate that now.
} else if (Sig != ('l' | ('l' << 8) | ('v' << 16) | ('m' << 24))) {
error("Invalid bytecode signature: " + utohexstr(Sig));
}
// Tell the handler we're starting a module
if (Handler) Handler->handleModuleBegin(ModuleID);
// Get the module block and size and verify. This is handled specially
// because the module block/size is always written in long format. Other
// blocks are written in short format so the read_block method is used.
unsigned Type, Size;
Type = read_uint();
Size = read_uint();
if (Type != BytecodeFormat::ModuleBlockID) {
error("Expected Module Block! Type:" + utostr(Type) + ", Size:"
+ utostr(Size));
}
// It looks like the darwin ranlib program is broken, and adds trailing
// garbage to the end of some bytecode files. This hack allows the bc
// reader to ignore trailing garbage on bytecode files.
if (At + Size < MemEnd)
MemEnd = BlockEnd = At+Size;
if (At + Size != MemEnd)
error("Invalid Top Level Block Length! Type:" + utostr(Type)
+ ", Size:" + utostr(Size));
// Parse the module contents
this->ParseModule();
// Check for missing functions
if (hasFunctions())
error("Function expected, but bytecode stream ended!");
// Look for intrinsic functions to upgrade, upgrade them, and save the
// mapping from old function to new for use later when instructions are
// converted.
for (Module::iterator FI = TheModule->begin(), FE = TheModule->end();
FI != FE; ++FI)
if (Function* newF = UpgradeIntrinsicFunction(FI)) {
upgradedFunctions.insert(std::make_pair(FI, newF));
FI->setName("");
}
// Tell the handler we're done with the module
if (Handler)
Handler->handleModuleEnd(ModuleID);
// Tell the handler we're finished the parse
if (Handler) Handler->handleFinish();
return false;
}
//===----------------------------------------------------------------------===//
//=== Default Implementations of Handler Methods
//===----------------------------------------------------------------------===//
BytecodeHandler::~BytecodeHandler() {}
Reference in New Issue View Git Blame Copy Permalink