llvm-6502/lib/Target/Hexagon/HexagonInstrFormats.td
Colin LeMahieu 324cd41b60 [Hexagon] Adding basic disassembler.
Marking all instructions as CodeGenOnly since encoding bits are not set yet.
http://reviews.llvm.org/D5829?vs=on&id=15023&whitespace=ignore-all#toc

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220393 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-22 16:49:14 +00:00

409 lines
16 KiB
TableGen

//==- HexagonInstrFormats.td - Hexagon Instruction Formats --*- tablegen -*-==//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Hexagon Instruction Flags +
//
// *** Must match HexagonBaseInfo.h ***
//===----------------------------------------------------------------------===//
class IType<bits<5> t> {
bits<5> Value = t;
}
def TypePSEUDO : IType<0>;
def TypeALU32 : IType<1>;
def TypeCR : IType<2>;
def TypeJR : IType<3>;
def TypeJ : IType<4>;
def TypeLD : IType<5>;
def TypeST : IType<6>;
def TypeSYSTEM : IType<7>;
def TypeXTYPE : IType<8>;
def TypeENDLOOP: IType<31>;
// Maintain list of valid subtargets for each instruction.
class SubTarget<bits<4> value> {
bits<4> Value = value;
}
def HasV2SubT : SubTarget<0xf>;
def HasV2SubTOnly : SubTarget<0x1>;
def NoV2SubT : SubTarget<0x0>;
def HasV3SubT : SubTarget<0xe>;
def HasV3SubTOnly : SubTarget<0x2>;
def NoV3SubT : SubTarget<0x1>;
def HasV4SubT : SubTarget<0xc>;
def NoV4SubT : SubTarget<0x3>;
def HasV5SubT : SubTarget<0x8>;
def NoV5SubT : SubTarget<0x7>;
// Addressing modes for load/store instructions
class AddrModeType<bits<3> value> {
bits<3> Value = value;
}
def NoAddrMode : AddrModeType<0>; // No addressing mode
def Absolute : AddrModeType<1>; // Absolute addressing mode
def AbsoluteSet : AddrModeType<2>; // Absolute set addressing mode
def BaseImmOffset : AddrModeType<3>; // Indirect with offset
def BaseLongOffset : AddrModeType<4>; // Indirect with long offset
def BaseRegOffset : AddrModeType<5>; // Indirect with register offset
def PostInc : AddrModeType<6>; // Post increment addressing mode
class MemAccessSize<bits<3> value> {
bits<3> Value = value;
}
def NoMemAccess : MemAccessSize<0>;// Not a memory acces instruction.
def ByteAccess : MemAccessSize<1>;// Byte access instruction (memb).
def HalfWordAccess : MemAccessSize<2>;// Half word access instruction (memh).
def WordAccess : MemAccessSize<3>;// Word access instruction (memw).
def DoubleWordAccess : MemAccessSize<4>;// Double word access instruction (memd)
//===----------------------------------------------------------------------===//
// Instruction Class Declaration +
//===----------------------------------------------------------------------===//
class OpcodeHexagon {
field bits<32> Inst = ?; // Default to an invalid insn.
bits<4> IClass = 0; // ICLASS
bits<2> IParse = 0; // Parse bits.
let Inst{31-28} = IClass;
let Inst{15-14} = IParse;
bits<1> zero = 0;
}
class InstHexagon<dag outs, dag ins, string asmstr, list<dag> pattern,
string cstr, InstrItinClass itin, IType type>
: Instruction, OpcodeHexagon {
let Namespace = "Hexagon";
dag OutOperandList = outs;
dag InOperandList = ins;
let AsmString = asmstr;
let Pattern = pattern;
let Constraints = cstr;
let Itinerary = itin;
let Size = 4;
// SoftFail is a field the disassembler can use to provide a way for
// instructions to not match without killing the whole decode process. It is
// mainly used for ARM, but Tablegen expects this field to exist or it fails
// to build the decode table.
field bits<32> SoftFail = 0;
// *** Must match MCTargetDesc/HexagonBaseInfo.h ***
// Instruction type according to the ISA.
IType Type = type;
let TSFlags{4-0} = Type.Value;
// Solo instructions, i.e., those that cannot be in a packet with others.
bits<1> isSolo = 0;
let TSFlags{5} = isSolo;
// Packed only with A or X-type instructions.
bits<1> isSoloAX = 0;
let TSFlags{6} = isSoloAX;
// Only A-type instruction in first slot or nothing.
bits<1> isSoloAin1 = 0;
let TSFlags{7} = isSoloAin1;
// Predicated instructions.
bits<1> isPredicated = 0;
let TSFlags{8} = isPredicated;
bits<1> isPredicatedFalse = 0;
let TSFlags{9} = isPredicatedFalse;
bits<1> isPredicatedNew = 0;
let TSFlags{10} = isPredicatedNew;
bits<1> isPredicateLate = 0;
let TSFlags{11} = isPredicateLate; // Late predicate producer insn.
// New-value insn helper fields.
bits<1> isNewValue = 0;
let TSFlags{12} = isNewValue; // New-value consumer insn.
bits<1> hasNewValue = 0;
let TSFlags{13} = hasNewValue; // New-value producer insn.
bits<3> opNewValue = 0;
let TSFlags{16-14} = opNewValue; // New-value produced operand.
bits<1> isNVStorable = 0;
let TSFlags{17} = isNVStorable; // Store that can become new-value store.
bits<1> isNVStore = 0;
let TSFlags{18} = isNVStore; // New-value store insn.
bits<1> isCVLoadable = 0;
let TSFlags{19} = isCVLoadable; // Load that can become cur-value load.
bits<1> isCVLoad = 0;
let TSFlags{20} = isCVLoad; // Cur-value load insn.
// Immediate extender helper fields.
bits<1> isExtendable = 0;
let TSFlags{21} = isExtendable; // Insn may be extended.
bits<1> isExtended = 0;
let TSFlags{22} = isExtended; // Insn must be extended.
bits<3> opExtendable = 0;
let TSFlags{25-23} = opExtendable; // Which operand may be extended.
bits<1> isExtentSigned = 0;
let TSFlags{26} = isExtentSigned; // Signed or unsigned range.
bits<5> opExtentBits = 0;
let TSFlags{31-27} = opExtentBits; //Number of bits of range before extending.
bits<2> opExtentAlign = 0;
let TSFlags{33-32} = opExtentAlign; // Alignment exponent before extending.
// If an instruction is valid on a subtarget (v2-v5), set the corresponding
// bit from validSubTargets. v2 is the least significant bit.
// By default, instruction is valid on all subtargets.
SubTarget validSubTargets = HasV2SubT;
let TSFlags{37-34} = validSubTargets.Value;
// Addressing mode for load/store instructions.
AddrModeType addrMode = NoAddrMode;
let TSFlags{42-40} = addrMode.Value;
// Memory access size for mem access instructions (load/store)
MemAccessSize accessSize = NoMemAccess;
let TSFlags{45-43} = accessSize.Value;
bits<1> isTaken = 0;
let TSFlags {47} = isTaken; // Branch prediction.
bits<1> isFP = 0;
let TSFlags {48} = isFP; // Floating-point.
// Fields used for relation models.
string BaseOpcode = "";
string CextOpcode = "";
string PredSense = "";
string PNewValue = "";
string NValueST = ""; // Set to "true" for new-value stores.
string InputType = ""; // Input is "imm" or "reg" type.
string isMEMri = "false"; // Set to "true" for load/store with MEMri operand.
string isFloat = "false"; // Set to "true" for the floating-point load/store.
string isBrTaken = ""; // Set to "true"/"false" for jump instructions
let PredSense = !if(isPredicated, !if(isPredicatedFalse, "false", "true"),
"");
let PNewValue = !if(isPredicatedNew, "new", "");
let NValueST = !if(isNVStore, "true", "false");
let isCodeGenOnly = 1;
// *** Must match MCTargetDesc/HexagonBaseInfo.h ***
}
//===----------------------------------------------------------------------===//
// Instruction Classes Definitions +
//===----------------------------------------------------------------------===//
// LD Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class LDInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = LD_tc_ld_SLOT01>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeLD>;
let mayLoad = 1 in
class LDInst2<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: LDInst<outs, ins, asmstr, pattern, cstr>;
class CONSTLDInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: LDInst<outs, ins, asmstr, pattern, cstr>;
// LD Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class LDInstPost<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: LDInst<outs, ins, asmstr, pattern, cstr>;
let mayLoad = 1 in
class LD0Inst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin=LD_tc_ld_SLOT0>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeLD>;
// ST Instruction Class in V2/V3 can take SLOT0 only.
// ST Instruction Class in V4 can take SLOT0 & SLOT1.
// Definition of the instruction class CHANGED from V2/V3 to V4.
let mayStore = 1 in
class STInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ST_tc_st_SLOT01>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeST>;
class STInst2<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: STInst<outs, ins, asmstr, pattern, cstr>;
let mayStore = 1 in
class ST0Inst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ST_tc_ld_SLOT0>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeST>;
// ST Instruction Class in V2/V3 can take SLOT0 only.
// ST Instruction Class in V4 can take SLOT0 & SLOT1.
// Definition of the instruction class CHANGED from V2/V3 to V4.
class STInstPost<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ST_tc_st_SLOT01>
: STInst<outs, ins, asmstr, pattern, cstr, itin>;
// SYSTEM Instruction Class in V4 can take SLOT0 only
// In V2/V3 we used ST for this but in v4 ST can take SLOT0 or SLOT1.
class SYSInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ST_tc_3stall_SLOT0>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeSYSTEM>;
// ALU32 Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class ALU32Inst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU32_2op_tc_1_SLOT0123>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeALU32>;
// ALU64 Instruction Class in V2/V3.
// XTYPE Instruction Class in V4.
// Definition of the instruction class NOT CHANGED.
// Name of the Instruction Class changed from ALU64 to XTYPE from V2/V3 to V4.
class ALU64Inst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU64_tc_2_SLOT23>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeXTYPE>;
class ALU64_acc<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU64_tc_2_SLOT23>
: ALU64Inst<outs, ins, asmstr, pattern, cstr, itin>;
// M Instruction Class in V2/V3.
// XTYPE Instruction Class in V4.
// Definition of the instruction class NOT CHANGED.
// Name of the Instruction Class changed from M to XTYPE from V2/V3 to V4.
class MInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = M_tc_3x_SLOT23>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeXTYPE>;
// M Instruction Class in V2/V3.
// XTYPE Instruction Class in V4.
// Definition of the instruction class NOT CHANGED.
// Name of the Instruction Class changed from M to XTYPE from V2/V3 to V4.
class MInst_acc<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = M_tc_2_SLOT23>
: MInst<outs, ins, asmstr, pattern, cstr, itin>;
// S Instruction Class in V2/V3.
// XTYPE Instruction Class in V4.
// Definition of the instruction class NOT CHANGED.
// Name of the Instruction Class changed from S to XTYPE from V2/V3 to V4.
class SInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = S_2op_tc_1_SLOT23>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeXTYPE>;
// S Instruction Class in V2/V3.
// XTYPE Instruction Class in V4.
// Definition of the instruction class NOT CHANGED.
// Name of the Instruction Class changed from S to XTYPE from V2/V3 to V4.
class SInst_acc<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = S_3op_tc_1_SLOT23>
: SInst<outs, ins, asmstr, pattern, cstr, itin>;
// J Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class JInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = J_tc_2early_SLOT23>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeJ>;
// JR Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class JRInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = J_tc_2early_SLOT2>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeJR>;
// CR Instruction Class in V2/V3/V4.
// Definition of the instruction class NOT CHANGED.
class CRInst<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = CR_tc_2early_SLOT3>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeCR>;
let isCodeGenOnly = 1, isPseudo = 1 in
class Endloop<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = J_tc_2early_SLOT0123>
: InstHexagon<outs, ins, asmstr, pattern, cstr, itin, TypeENDLOOP>;
let isCodeGenOnly = 1, isPseudo = 1 in
class Pseudo<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: InstHexagon<outs, ins, asmstr, pattern, cstr, PSEUDO, TypePSEUDO>;
let isCodeGenOnly = 1, isPseudo = 1 in
class PseudoM<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr="">
: InstHexagon<outs, ins, asmstr, pattern, cstr, PSEUDOM, TypePSEUDO>;
//===----------------------------------------------------------------------===//
// Instruction Classes Definitions -
//===----------------------------------------------------------------------===//
//
// ALU32 patterns
//.
class ALU32_rr<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU32_2op_tc_1_SLOT0123>
: ALU32Inst<outs, ins, asmstr, pattern, cstr, itin>;
class ALU32_ir<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU32_2op_tc_1_SLOT0123>
: ALU32Inst<outs, ins, asmstr, pattern, cstr, itin>;
class ALU32_ri<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU32_2op_tc_1_SLOT0123>
: ALU32Inst<outs, ins, asmstr, pattern, cstr, itin>;
class ALU32_ii<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU32_2op_tc_1_SLOT0123>
: ALU32Inst<outs, ins, asmstr, pattern, cstr, itin>;
//
// ALU64 patterns.
//
class ALU64_rr<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU64_tc_1_SLOT23>
: ALU64Inst<outs, ins, asmstr, pattern, cstr, itin>;
class ALU64_ri<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "", InstrItinClass itin = ALU64_tc_1_SLOT23>
: ALU64Inst<outs, ins, asmstr, pattern, cstr, itin>;
// Post increment ST Instruction.
class STInstPI<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: STInst<outs, ins, asmstr, pattern, cstr>;
let mayStore = 1 in
class STInst2PI<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: STInst<outs, ins, asmstr, pattern, cstr>;
// Post increment LD Instruction.
class LDInstPI<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: LDInst<outs, ins, asmstr, pattern, cstr>;
let mayLoad = 1 in
class LDInst2PI<dag outs, dag ins, string asmstr, list<dag> pattern = [],
string cstr = "">
: LDInst<outs, ins, asmstr, pattern, cstr>;
//===----------------------------------------------------------------------===//
// V4 Instruction Format Definitions +
//===----------------------------------------------------------------------===//
include "HexagonInstrFormatsV4.td"
//===----------------------------------------------------------------------===//
// V4 Instruction Format Definitions +
//===----------------------------------------------------------------------===//