llvm-6502/lib/Target/PowerPC/PPCISelLowering.h
Chris Lattner 4234f57fa0 switch TargetLowering::getConstraintType to take the entire constraint,
not just the first letter.  No functionality change.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35322 91177308-0d34-0410-b5e6-96231b3b80d8
2007-03-25 02:14:49 +00:00

253 lines
11 KiB
C++

//===-- PPCISelLowering.h - PPC32 DAG Lowering Interface --------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file was developed by Chris Lattner and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the interfaces that PPC uses to lower LLVM code into a
// selection DAG.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
#define LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
#include "llvm/Target/TargetLowering.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "PPC.h"
#include "PPCSubtarget.h"
namespace llvm {
namespace PPCISD {
enum NodeType {
// Start the numbering where the builtin ops and target ops leave off.
FIRST_NUMBER = ISD::BUILTIN_OP_END+PPC::INSTRUCTION_LIST_END,
/// FSEL - Traditional three-operand fsel node.
///
FSEL,
/// FCFID - The FCFID instruction, taking an f64 operand and producing
/// and f64 value containing the FP representation of the integer that
/// was temporarily in the f64 operand.
FCFID,
/// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64
/// operand, producing an f64 value containing the integer representation
/// of that FP value.
FCTIDZ, FCTIWZ,
/// STFIWX - The STFIWX instruction. The first operand is an input token
/// chain, then an f64 value to store, then an address to store it to,
/// then a SRCVALUE for the address.
STFIWX,
// VMADDFP, VNMSUBFP - The VMADDFP and VNMSUBFP instructions, taking
// three v4f32 operands and producing a v4f32 result.
VMADDFP, VNMSUBFP,
/// VPERM - The PPC VPERM Instruction.
///
VPERM,
/// Hi/Lo - These represent the high and low 16-bit parts of a global
/// address respectively. These nodes have two operands, the first of
/// which must be a TargetGlobalAddress, and the second of which must be a
/// Constant. Selected naively, these turn into 'lis G+C' and 'li G+C',
/// though these are usually folded into other nodes.
Hi, Lo,
/// OPRC, CHAIN = DYNALLOC(CHAIN, NEGSIZE, FRAME_INDEX)
/// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to
/// compute an allocation on the stack.
DYNALLOC,
/// GlobalBaseReg - On Darwin, this node represents the result of the mflr
/// at function entry, used for PIC code.
GlobalBaseReg,
/// These nodes represent the 32-bit PPC shifts that operate on 6-bit
/// shift amounts. These nodes are generated by the multi-precision shift
/// code.
SRL, SRA, SHL,
/// EXTSW_32 - This is the EXTSW instruction for use with "32-bit"
/// registers.
EXTSW_32,
/// STD_32 - This is the STD instruction for use with "32-bit" registers.
STD_32,
/// CALL - A direct function call.
CALL_Macho, CALL_ELF,
/// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a
/// MTCTR instruction.
MTCTR,
/// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a
/// BCTRL instruction.
BCTRL_Macho, BCTRL_ELF,
/// Return with a flag operand, matched by 'blr'
RET_FLAG,
/// R32 = MFCR(CRREG, INFLAG) - Represents the MFCR/MFOCRF instructions.
/// This copies the bits corresponding to the specified CRREG into the
/// resultant GPR. Bits corresponding to other CR regs are undefined.
MFCR,
/// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP*
/// instructions. For lack of better number, we use the opcode number
/// encoding for the OPC field to identify the compare. For example, 838
/// is VCMPGTSH.
VCMP,
/// RESVEC, OUTFLAG = VCMPo(LHS, RHS, OPC) - Represents one of the
/// altivec VCMP*o instructions. For lack of better number, we use the
/// opcode number encoding for the OPC field to identify the compare. For
/// example, 838 is VCMPGTSH.
VCMPo,
/// CHAIN = COND_BRANCH CHAIN, CRRC, OPC, DESTBB [, INFLAG] - This
/// corresponds to the COND_BRANCH pseudo instruction. CRRC is the
/// condition register to branch on, OPC is the branch opcode to use (e.g.
/// PPC::BLE), DESTBB is the destination block to branch to, and INFLAG is
/// an optional input flag argument.
COND_BRANCH,
/// CHAIN = STBRX CHAIN, GPRC, Ptr, SRCVALUE, Type - This is a
/// byte-swapping store instruction. It byte-swaps the low "Type" bits of
/// the GPRC input, then stores it through Ptr. Type can be either i16 or
/// i32.
STBRX,
/// GPRC, CHAIN = LBRX CHAIN, Ptr, SRCVALUE, Type - This is a
/// byte-swapping load instruction. It loads "Type" bits, byte swaps it,
/// then puts it in the bottom bits of the GPRC. TYPE can be either i16
/// or i32.
LBRX
};
}
/// Define some predicates that are used for node matching.
namespace PPC {
/// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
/// VPKUHUM instruction.
bool isVPKUHUMShuffleMask(SDNode *N, bool isUnary);
/// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
/// VPKUWUM instruction.
bool isVPKUWUMShuffleMask(SDNode *N, bool isUnary);
/// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
/// a VRGL* instruction with the specified unit size (1,2 or 4 bytes).
bool isVMRGLShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary);
/// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
/// a VRGH* instruction with the specified unit size (1,2 or 4 bytes).
bool isVMRGHShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary);
/// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
/// amount, otherwise return -1.
int isVSLDOIShuffleMask(SDNode *N, bool isUnary);
/// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
/// specifies a splat of a single element that is suitable for input to
/// VSPLTB/VSPLTH/VSPLTW.
bool isSplatShuffleMask(SDNode *N, unsigned EltSize);
/// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
/// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
unsigned getVSPLTImmediate(SDNode *N, unsigned EltSize);
/// get_VSPLTI_elt - If this is a build_vector of constants which can be
/// formed by using a vspltis[bhw] instruction of the specified element
/// size, return the constant being splatted. The ByteSize field indicates
/// the number of bytes of each element [124] -> [bhw].
SDOperand get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG);
}
class PPCTargetLowering : public TargetLowering {
int VarArgsFrameIndex; // FrameIndex for start of varargs area.
int ReturnAddrIndex; // FrameIndex for return slot.
const PPCSubtarget &PPCSubTarget;
public:
PPCTargetLowering(PPCTargetMachine &TM);
/// getTargetNodeName() - This method returns the name of a target specific
/// DAG node.
virtual const char *getTargetNodeName(unsigned Opcode) const;
/// getPreIndexedAddressParts - returns true by value, base pointer and
/// offset pointer and addressing mode by reference if the node's address
/// can be legally represented as pre-indexed load / store address.
virtual bool getPreIndexedAddressParts(SDNode *N, SDOperand &Base,
SDOperand &Offset,
ISD::MemIndexedMode &AM,
SelectionDAG &DAG);
/// SelectAddressRegReg - Given the specified addressed, check to see if it
/// can be represented as an indexed [r+r] operation. Returns false if it
/// can be more efficiently represented with [r+imm].
bool SelectAddressRegReg(SDOperand N, SDOperand &Base, SDOperand &Index,
SelectionDAG &DAG);
/// SelectAddressRegImm - Returns true if the address N can be represented
/// by a base register plus a signed 16-bit displacement [r+imm], and if it
/// is not better represented as reg+reg.
bool SelectAddressRegImm(SDOperand N, SDOperand &Disp, SDOperand &Base,
SelectionDAG &DAG);
/// SelectAddressRegRegOnly - Given the specified addressed, force it to be
/// represented as an indexed [r+r] operation.
bool SelectAddressRegRegOnly(SDOperand N, SDOperand &Base, SDOperand &Index,
SelectionDAG &DAG);
/// SelectAddressRegImmShift - Returns true if the address N can be
/// represented by a base register plus a signed 14-bit displacement
/// [r+imm*4]. Suitable for use by STD and friends.
bool SelectAddressRegImmShift(SDOperand N, SDOperand &Disp, SDOperand &Base,
SelectionDAG &DAG);
/// LowerOperation - Provide custom lowering hooks for some operations.
///
virtual SDOperand LowerOperation(SDOperand Op, SelectionDAG &DAG);
virtual SDOperand PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
virtual void computeMaskedBitsForTargetNode(const SDOperand Op,
uint64_t Mask,
uint64_t &KnownZero,
uint64_t &KnownOne,
unsigned Depth = 0) const;
virtual MachineBasicBlock *InsertAtEndOfBasicBlock(MachineInstr *MI,
MachineBasicBlock *MBB);
ConstraintType getConstraintType(const std::string &Constraint) const;
std::pair<unsigned, const TargetRegisterClass*>
getRegForInlineAsmConstraint(const std::string &Constraint,
MVT::ValueType VT) const;
SDOperand isOperandValidForConstraint(SDOperand Op, char ConstraintLetter,
SelectionDAG &DAG);
/// isLegalAddressImmediate - Return true if the integer value can be used
/// as the offset of the target addressing mode for load / store of the
/// given type.
virtual bool isLegalAddressImmediate(int64_t V, const Type *Ty) const;
/// isLegalAddressImmediate - Return true if the GlobalValue can be used as
/// the offset of the target addressing mode.
virtual bool isLegalAddressImmediate(GlobalValue *GV) const;
SDOperand LowerFRAMEADDR(SDOperand Op, SelectionDAG &DAG);
};
}
#endif // LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H