llvm-6502/lib/Support/APInt.cpp
Zhou Sheng bfde7d6b9e As comments said, for negative value, the arithmetic
over-shift-right should return -1. So here it should be signed-extended,
when bitwidth larger than 64.

test case: llvm/test/ExecutionEngine/2008-06-05-APInt-OverAShr.ll


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51999 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-05 13:27:38 +00:00

2714 lines
82 KiB
C++

//===-- APInt.cpp - Implement APInt class ---------------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements a class to represent arbitrary precision integer
// constant values and provide a variety of arithmetic operations on them.
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "apint"
#include "llvm/ADT/APInt.h"
#include "llvm/ADT/FoldingSet.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/MathExtras.h"
#include <math.h>
#include <limits>
#include <cstring>
#include <cstdlib>
#include <iomanip>
using namespace llvm;
/// This enumeration just provides for internal constants used in this
/// translation unit.
enum {
MIN_INT_BITS = 1, ///< Minimum number of bits that can be specified
///< Note that this must remain synchronized with IntegerType::MIN_INT_BITS
MAX_INT_BITS = (1<<23)-1 ///< Maximum number of bits that can be specified
///< Note that this must remain synchronized with IntegerType::MAX_INT_BITS
};
/// A utility function for allocating memory, checking for allocation failures,
/// and ensuring the contents are zeroed.
inline static uint64_t* getClearedMemory(uint32_t numWords) {
uint64_t * result = new uint64_t[numWords];
assert(result && "APInt memory allocation fails!");
memset(result, 0, numWords * sizeof(uint64_t));
return result;
}
/// A utility function for allocating memory and checking for allocation
/// failure. The content is not zeroed.
inline static uint64_t* getMemory(uint32_t numWords) {
uint64_t * result = new uint64_t[numWords];
assert(result && "APInt memory allocation fails!");
return result;
}
APInt::APInt(uint32_t numBits, uint64_t val, bool isSigned)
: BitWidth(numBits), VAL(0) {
assert(BitWidth >= MIN_INT_BITS && "bitwidth too small");
assert(BitWidth <= MAX_INT_BITS && "bitwidth too large");
if (isSingleWord())
VAL = val;
else {
pVal = getClearedMemory(getNumWords());
pVal[0] = val;
if (isSigned && int64_t(val) < 0)
for (unsigned i = 1; i < getNumWords(); ++i)
pVal[i] = -1ULL;
}
clearUnusedBits();
}
APInt::APInt(uint32_t numBits, uint32_t numWords, const uint64_t bigVal[])
: BitWidth(numBits), VAL(0) {
assert(BitWidth >= MIN_INT_BITS && "bitwidth too small");
assert(BitWidth <= MAX_INT_BITS && "bitwidth too large");
assert(bigVal && "Null pointer detected!");
if (isSingleWord())
VAL = bigVal[0];
else {
// Get memory, cleared to 0
pVal = getClearedMemory(getNumWords());
// Calculate the number of words to copy
uint32_t words = std::min<uint32_t>(numWords, getNumWords());
// Copy the words from bigVal to pVal
memcpy(pVal, bigVal, words * APINT_WORD_SIZE);
}
// Make sure unused high bits are cleared
clearUnusedBits();
}
APInt::APInt(uint32_t numbits, const char StrStart[], uint32_t slen,
uint8_t radix)
: BitWidth(numbits), VAL(0) {
assert(BitWidth >= MIN_INT_BITS && "bitwidth too small");
assert(BitWidth <= MAX_INT_BITS && "bitwidth too large");
fromString(numbits, StrStart, slen, radix);
}
APInt::APInt(uint32_t numbits, const std::string& Val, uint8_t radix)
: BitWidth(numbits), VAL(0) {
assert(BitWidth >= MIN_INT_BITS && "bitwidth too small");
assert(BitWidth <= MAX_INT_BITS && "bitwidth too large");
assert(!Val.empty() && "String empty?");
fromString(numbits, Val.c_str(), (uint32_t)Val.size(), radix);
}
APInt::APInt(const APInt& that)
: BitWidth(that.BitWidth), VAL(0) {
assert(BitWidth >= MIN_INT_BITS && "bitwidth too small");
assert(BitWidth <= MAX_INT_BITS && "bitwidth too large");
if (isSingleWord())
VAL = that.VAL;
else {
pVal = getMemory(getNumWords());
memcpy(pVal, that.pVal, getNumWords() * APINT_WORD_SIZE);
}
}
APInt::~APInt() {
if (!isSingleWord() && pVal)
delete [] pVal;
}
APInt& APInt::operator=(const APInt& RHS) {
// Don't do anything for X = X
if (this == &RHS)
return *this;
// If the bitwidths are the same, we can avoid mucking with memory
if (BitWidth == RHS.getBitWidth()) {
if (isSingleWord())
VAL = RHS.VAL;
else
memcpy(pVal, RHS.pVal, getNumWords() * APINT_WORD_SIZE);
return *this;
}
if (isSingleWord())
if (RHS.isSingleWord())
VAL = RHS.VAL;
else {
VAL = 0;
pVal = getMemory(RHS.getNumWords());
memcpy(pVal, RHS.pVal, RHS.getNumWords() * APINT_WORD_SIZE);
}
else if (getNumWords() == RHS.getNumWords())
memcpy(pVal, RHS.pVal, RHS.getNumWords() * APINT_WORD_SIZE);
else if (RHS.isSingleWord()) {
delete [] pVal;
VAL = RHS.VAL;
} else {
delete [] pVal;
pVal = getMemory(RHS.getNumWords());
memcpy(pVal, RHS.pVal, RHS.getNumWords() * APINT_WORD_SIZE);
}
BitWidth = RHS.BitWidth;
return clearUnusedBits();
}
APInt& APInt::operator=(uint64_t RHS) {
if (isSingleWord())
VAL = RHS;
else {
pVal[0] = RHS;
memset(pVal+1, 0, (getNumWords() - 1) * APINT_WORD_SIZE);
}
return clearUnusedBits();
}
/// Profile - This method 'profiles' an APInt for use with FoldingSet.
void APInt::Profile(FoldingSetNodeID& ID) const {
ID.AddInteger(BitWidth);
if (isSingleWord()) {
ID.AddInteger(VAL);
return;
}
uint32_t NumWords = getNumWords();
for (unsigned i = 0; i < NumWords; ++i)
ID.AddInteger(pVal[i]);
}
/// add_1 - This function adds a single "digit" integer, y, to the multiple
/// "digit" integer array, x[]. x[] is modified to reflect the addition and
/// 1 is returned if there is a carry out, otherwise 0 is returned.
/// @returns the carry of the addition.
static bool add_1(uint64_t dest[], uint64_t x[], uint32_t len, uint64_t y) {
for (uint32_t i = 0; i < len; ++i) {
dest[i] = y + x[i];
if (dest[i] < y)
y = 1; // Carry one to next digit.
else {
y = 0; // No need to carry so exit early
break;
}
}
return y;
}
/// @brief Prefix increment operator. Increments the APInt by one.
APInt& APInt::operator++() {
if (isSingleWord())
++VAL;
else
add_1(pVal, pVal, getNumWords(), 1);
return clearUnusedBits();
}
/// sub_1 - This function subtracts a single "digit" (64-bit word), y, from
/// the multi-digit integer array, x[], propagating the borrowed 1 value until
/// no further borrowing is neeeded or it runs out of "digits" in x. The result
/// is 1 if "borrowing" exhausted the digits in x, or 0 if x was not exhausted.
/// In other words, if y > x then this function returns 1, otherwise 0.
/// @returns the borrow out of the subtraction
static bool sub_1(uint64_t x[], uint32_t len, uint64_t y) {
for (uint32_t i = 0; i < len; ++i) {
uint64_t X = x[i];
x[i] -= y;
if (y > X)
y = 1; // We have to "borrow 1" from next "digit"
else {
y = 0; // No need to borrow
break; // Remaining digits are unchanged so exit early
}
}
return bool(y);
}
/// @brief Prefix decrement operator. Decrements the APInt by one.
APInt& APInt::operator--() {
if (isSingleWord())
--VAL;
else
sub_1(pVal, getNumWords(), 1);
return clearUnusedBits();
}
/// add - This function adds the integer array x to the integer array Y and
/// places the result in dest.
/// @returns the carry out from the addition
/// @brief General addition of 64-bit integer arrays
static bool add(uint64_t *dest, const uint64_t *x, const uint64_t *y,
uint32_t len) {
bool carry = false;
for (uint32_t i = 0; i< len; ++i) {
uint64_t limit = std::min(x[i],y[i]); // must come first in case dest == x
dest[i] = x[i] + y[i] + carry;
carry = dest[i] < limit || (carry && dest[i] == limit);
}
return carry;
}
/// Adds the RHS APint to this APInt.
/// @returns this, after addition of RHS.
/// @brief Addition assignment operator.
APInt& APInt::operator+=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
VAL += RHS.VAL;
else {
add(pVal, pVal, RHS.pVal, getNumWords());
}
return clearUnusedBits();
}
/// Subtracts the integer array y from the integer array x
/// @returns returns the borrow out.
/// @brief Generalized subtraction of 64-bit integer arrays.
static bool sub(uint64_t *dest, const uint64_t *x, const uint64_t *y,
uint32_t len) {
bool borrow = false;
for (uint32_t i = 0; i < len; ++i) {
uint64_t x_tmp = borrow ? x[i] - 1 : x[i];
borrow = y[i] > x_tmp || (borrow && x[i] == 0);
dest[i] = x_tmp - y[i];
}
return borrow;
}
/// Subtracts the RHS APInt from this APInt
/// @returns this, after subtraction
/// @brief Subtraction assignment operator.
APInt& APInt::operator-=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
VAL -= RHS.VAL;
else
sub(pVal, pVal, RHS.pVal, getNumWords());
return clearUnusedBits();
}
/// Multiplies an integer array, x by a a uint64_t integer and places the result
/// into dest.
/// @returns the carry out of the multiplication.
/// @brief Multiply a multi-digit APInt by a single digit (64-bit) integer.
static uint64_t mul_1(uint64_t dest[], uint64_t x[], uint32_t len, uint64_t y) {
// Split y into high 32-bit part (hy) and low 32-bit part (ly)
uint64_t ly = y & 0xffffffffULL, hy = y >> 32;
uint64_t carry = 0;
// For each digit of x.
for (uint32_t i = 0; i < len; ++i) {
// Split x into high and low words
uint64_t lx = x[i] & 0xffffffffULL;
uint64_t hx = x[i] >> 32;
// hasCarry - A flag to indicate if there is a carry to the next digit.
// hasCarry == 0, no carry
// hasCarry == 1, has carry
// hasCarry == 2, no carry and the calculation result == 0.
uint8_t hasCarry = 0;
dest[i] = carry + lx * ly;
// Determine if the add above introduces carry.
hasCarry = (dest[i] < carry) ? 1 : 0;
carry = hx * ly + (dest[i] >> 32) + (hasCarry ? (1ULL << 32) : 0);
// The upper limit of carry can be (2^32 - 1)(2^32 - 1) +
// (2^32 - 1) + 2^32 = 2^64.
hasCarry = (!carry && hasCarry) ? 1 : (!carry ? 2 : 0);
carry += (lx * hy) & 0xffffffffULL;
dest[i] = (carry << 32) | (dest[i] & 0xffffffffULL);
carry = (((!carry && hasCarry != 2) || hasCarry == 1) ? (1ULL << 32) : 0) +
(carry >> 32) + ((lx * hy) >> 32) + hx * hy;
}
return carry;
}
/// Multiplies integer array x by integer array y and stores the result into
/// the integer array dest. Note that dest's size must be >= xlen + ylen.
/// @brief Generalized multiplicate of integer arrays.
static void mul(uint64_t dest[], uint64_t x[], uint32_t xlen, uint64_t y[],
uint32_t ylen) {
dest[xlen] = mul_1(dest, x, xlen, y[0]);
for (uint32_t i = 1; i < ylen; ++i) {
uint64_t ly = y[i] & 0xffffffffULL, hy = y[i] >> 32;
uint64_t carry = 0, lx = 0, hx = 0;
for (uint32_t j = 0; j < xlen; ++j) {
lx = x[j] & 0xffffffffULL;
hx = x[j] >> 32;
// hasCarry - A flag to indicate if has carry.
// hasCarry == 0, no carry
// hasCarry == 1, has carry
// hasCarry == 2, no carry and the calculation result == 0.
uint8_t hasCarry = 0;
uint64_t resul = carry + lx * ly;
hasCarry = (resul < carry) ? 1 : 0;
carry = (hasCarry ? (1ULL << 32) : 0) + hx * ly + (resul >> 32);
hasCarry = (!carry && hasCarry) ? 1 : (!carry ? 2 : 0);
carry += (lx * hy) & 0xffffffffULL;
resul = (carry << 32) | (resul & 0xffffffffULL);
dest[i+j] += resul;
carry = (((!carry && hasCarry != 2) || hasCarry == 1) ? (1ULL << 32) : 0)+
(carry >> 32) + (dest[i+j] < resul ? 1 : 0) +
((lx * hy) >> 32) + hx * hy;
}
dest[i+xlen] = carry;
}
}
APInt& APInt::operator*=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord()) {
VAL *= RHS.VAL;
clearUnusedBits();
return *this;
}
// Get some bit facts about LHS and check for zero
uint32_t lhsBits = getActiveBits();
uint32_t lhsWords = !lhsBits ? 0 : whichWord(lhsBits - 1) + 1;
if (!lhsWords)
// 0 * X ===> 0
return *this;
// Get some bit facts about RHS and check for zero
uint32_t rhsBits = RHS.getActiveBits();
uint32_t rhsWords = !rhsBits ? 0 : whichWord(rhsBits - 1) + 1;
if (!rhsWords) {
// X * 0 ===> 0
clear();
return *this;
}
// Allocate space for the result
uint32_t destWords = rhsWords + lhsWords;
uint64_t *dest = getMemory(destWords);
// Perform the long multiply
mul(dest, pVal, lhsWords, RHS.pVal, rhsWords);
// Copy result back into *this
clear();
uint32_t wordsToCopy = destWords >= getNumWords() ? getNumWords() : destWords;
memcpy(pVal, dest, wordsToCopy * APINT_WORD_SIZE);
// delete dest array and return
delete[] dest;
return *this;
}
APInt& APInt::operator&=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord()) {
VAL &= RHS.VAL;
return *this;
}
uint32_t numWords = getNumWords();
for (uint32_t i = 0; i < numWords; ++i)
pVal[i] &= RHS.pVal[i];
return *this;
}
APInt& APInt::operator|=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord()) {
VAL |= RHS.VAL;
return *this;
}
uint32_t numWords = getNumWords();
for (uint32_t i = 0; i < numWords; ++i)
pVal[i] |= RHS.pVal[i];
return *this;
}
APInt& APInt::operator^=(const APInt& RHS) {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord()) {
VAL ^= RHS.VAL;
this->clearUnusedBits();
return *this;
}
uint32_t numWords = getNumWords();
for (uint32_t i = 0; i < numWords; ++i)
pVal[i] ^= RHS.pVal[i];
return clearUnusedBits();
}
APInt APInt::operator&(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(getBitWidth(), VAL & RHS.VAL);
uint32_t numWords = getNumWords();
uint64_t* val = getMemory(numWords);
for (uint32_t i = 0; i < numWords; ++i)
val[i] = pVal[i] & RHS.pVal[i];
return APInt(val, getBitWidth());
}
APInt APInt::operator|(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(getBitWidth(), VAL | RHS.VAL);
uint32_t numWords = getNumWords();
uint64_t *val = getMemory(numWords);
for (uint32_t i = 0; i < numWords; ++i)
val[i] = pVal[i] | RHS.pVal[i];
return APInt(val, getBitWidth());
}
APInt APInt::operator^(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(BitWidth, VAL ^ RHS.VAL);
uint32_t numWords = getNumWords();
uint64_t *val = getMemory(numWords);
for (uint32_t i = 0; i < numWords; ++i)
val[i] = pVal[i] ^ RHS.pVal[i];
// 0^0==1 so clear the high bits in case they got set.
return APInt(val, getBitWidth()).clearUnusedBits();
}
bool APInt::operator !() const {
if (isSingleWord())
return !VAL;
for (uint32_t i = 0; i < getNumWords(); ++i)
if (pVal[i])
return false;
return true;
}
APInt APInt::operator*(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(BitWidth, VAL * RHS.VAL);
APInt Result(*this);
Result *= RHS;
return Result.clearUnusedBits();
}
APInt APInt::operator+(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(BitWidth, VAL + RHS.VAL);
APInt Result(BitWidth, 0);
add(Result.pVal, this->pVal, RHS.pVal, getNumWords());
return Result.clearUnusedBits();
}
APInt APInt::operator-(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord())
return APInt(BitWidth, VAL - RHS.VAL);
APInt Result(BitWidth, 0);
sub(Result.pVal, this->pVal, RHS.pVal, getNumWords());
return Result.clearUnusedBits();
}
bool APInt::operator[](uint32_t bitPosition) const {
return (maskBit(bitPosition) &
(isSingleWord() ? VAL : pVal[whichWord(bitPosition)])) != 0;
}
bool APInt::operator==(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Comparison requires equal bit widths");
if (isSingleWord())
return VAL == RHS.VAL;
// Get some facts about the number of bits used in the two operands.
uint32_t n1 = getActiveBits();
uint32_t n2 = RHS.getActiveBits();
// If the number of bits isn't the same, they aren't equal
if (n1 != n2)
return false;
// If the number of bits fits in a word, we only need to compare the low word.
if (n1 <= APINT_BITS_PER_WORD)
return pVal[0] == RHS.pVal[0];
// Otherwise, compare everything
for (int i = whichWord(n1 - 1); i >= 0; --i)
if (pVal[i] != RHS.pVal[i])
return false;
return true;
}
bool APInt::operator==(uint64_t Val) const {
if (isSingleWord())
return VAL == Val;
uint32_t n = getActiveBits();
if (n <= APINT_BITS_PER_WORD)
return pVal[0] == Val;
else
return false;
}
bool APInt::ult(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be same for comparison");
if (isSingleWord())
return VAL < RHS.VAL;
// Get active bit length of both operands
uint32_t n1 = getActiveBits();
uint32_t n2 = RHS.getActiveBits();
// If magnitude of LHS is less than RHS, return true.
if (n1 < n2)
return true;
// If magnitude of RHS is greather than LHS, return false.
if (n2 < n1)
return false;
// If they bot fit in a word, just compare the low order word
if (n1 <= APINT_BITS_PER_WORD && n2 <= APINT_BITS_PER_WORD)
return pVal[0] < RHS.pVal[0];
// Otherwise, compare all words
uint32_t topWord = whichWord(std::max(n1,n2)-1);
for (int i = topWord; i >= 0; --i) {
if (pVal[i] > RHS.pVal[i])
return false;
if (pVal[i] < RHS.pVal[i])
return true;
}
return false;
}
bool APInt::slt(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be same for comparison");
if (isSingleWord()) {
int64_t lhsSext = (int64_t(VAL) << (64-BitWidth)) >> (64-BitWidth);
int64_t rhsSext = (int64_t(RHS.VAL) << (64-BitWidth)) >> (64-BitWidth);
return lhsSext < rhsSext;
}
APInt lhs(*this);
APInt rhs(RHS);
bool lhsNeg = isNegative();
bool rhsNeg = rhs.isNegative();
if (lhsNeg) {
// Sign bit is set so perform two's complement to make it positive
lhs.flip();
lhs++;
}
if (rhsNeg) {
// Sign bit is set so perform two's complement to make it positive
rhs.flip();
rhs++;
}
// Now we have unsigned values to compare so do the comparison if necessary
// based on the negativeness of the values.
if (lhsNeg)
if (rhsNeg)
return lhs.ugt(rhs);
else
return true;
else if (rhsNeg)
return false;
else
return lhs.ult(rhs);
}
APInt& APInt::set(uint32_t bitPosition) {
if (isSingleWord())
VAL |= maskBit(bitPosition);
else
pVal[whichWord(bitPosition)] |= maskBit(bitPosition);
return *this;
}
APInt& APInt::set() {
if (isSingleWord()) {
VAL = -1ULL;
return clearUnusedBits();
}
// Set all the bits in all the words.
for (uint32_t i = 0; i < getNumWords(); ++i)
pVal[i] = -1ULL;
// Clear the unused ones
return clearUnusedBits();
}
/// Set the given bit to 0 whose position is given as "bitPosition".
/// @brief Set a given bit to 0.
APInt& APInt::clear(uint32_t bitPosition) {
if (isSingleWord())
VAL &= ~maskBit(bitPosition);
else
pVal[whichWord(bitPosition)] &= ~maskBit(bitPosition);
return *this;
}
/// @brief Set every bit to 0.
APInt& APInt::clear() {
if (isSingleWord())
VAL = 0;
else
memset(pVal, 0, getNumWords() * APINT_WORD_SIZE);
return *this;
}
/// @brief Bitwise NOT operator. Performs a bitwise logical NOT operation on
/// this APInt.
APInt APInt::operator~() const {
APInt Result(*this);
Result.flip();
return Result;
}
/// @brief Toggle every bit to its opposite value.
APInt& APInt::flip() {
if (isSingleWord()) {
VAL ^= -1ULL;
return clearUnusedBits();
}
for (uint32_t i = 0; i < getNumWords(); ++i)
pVal[i] ^= -1ULL;
return clearUnusedBits();
}
/// Toggle a given bit to its opposite value whose position is given
/// as "bitPosition".
/// @brief Toggles a given bit to its opposite value.
APInt& APInt::flip(uint32_t bitPosition) {
assert(bitPosition < BitWidth && "Out of the bit-width range!");
if ((*this)[bitPosition]) clear(bitPosition);
else set(bitPosition);
return *this;
}
uint32_t APInt::getBitsNeeded(const char* str, uint32_t slen, uint8_t radix) {
assert(str != 0 && "Invalid value string");
assert(slen > 0 && "Invalid string length");
// Each computation below needs to know if its negative
uint32_t isNegative = str[0] == '-';
if (isNegative) {
slen--;
str++;
}
// For radixes of power-of-two values, the bits required is accurately and
// easily computed
if (radix == 2)
return slen + isNegative;
if (radix == 8)
return slen * 3 + isNegative;
if (radix == 16)
return slen * 4 + isNegative;
// Otherwise it must be radix == 10, the hard case
assert(radix == 10 && "Invalid radix");
// This is grossly inefficient but accurate. We could probably do something
// with a computation of roughly slen*64/20 and then adjust by the value of
// the first few digits. But, I'm not sure how accurate that could be.
// Compute a sufficient number of bits that is always large enough but might
// be too large. This avoids the assertion in the constructor.
uint32_t sufficient = slen*64/18;
// Convert to the actual binary value.
APInt tmp(sufficient, str, slen, radix);
// Compute how many bits are required.
return isNegative + tmp.logBase2() + 1;
}
uint64_t APInt::getHashValue() const {
// Put the bit width into the low order bits.
uint64_t hash = BitWidth;
// Add the sum of the words to the hash.
if (isSingleWord())
hash += VAL << 6; // clear separation of up to 64 bits
else
for (uint32_t i = 0; i < getNumWords(); ++i)
hash += pVal[i] << 6; // clear sepration of up to 64 bits
return hash;
}
/// HiBits - This function returns the high "numBits" bits of this APInt.
APInt APInt::getHiBits(uint32_t numBits) const {
return APIntOps::lshr(*this, BitWidth - numBits);
}
/// LoBits - This function returns the low "numBits" bits of this APInt.
APInt APInt::getLoBits(uint32_t numBits) const {
return APIntOps::lshr(APIntOps::shl(*this, BitWidth - numBits),
BitWidth - numBits);
}
bool APInt::isPowerOf2() const {
return (!!*this) && !(*this & (*this - APInt(BitWidth,1)));
}
uint32_t APInt::countLeadingZeros() const {
uint32_t Count = 0;
if (isSingleWord())
Count = CountLeadingZeros_64(VAL);
else {
for (uint32_t i = getNumWords(); i > 0u; --i) {
if (pVal[i-1] == 0)
Count += APINT_BITS_PER_WORD;
else {
Count += CountLeadingZeros_64(pVal[i-1]);
break;
}
}
}
uint32_t remainder = BitWidth % APINT_BITS_PER_WORD;
if (remainder)
Count -= APINT_BITS_PER_WORD - remainder;
return std::min(Count, BitWidth);
}
static uint32_t countLeadingOnes_64(uint64_t V, uint32_t skip) {
uint32_t Count = 0;
if (skip)
V <<= skip;
while (V && (V & (1ULL << 63))) {
Count++;
V <<= 1;
}
return Count;
}
uint32_t APInt::countLeadingOnes() const {
if (isSingleWord())
return countLeadingOnes_64(VAL, APINT_BITS_PER_WORD - BitWidth);
uint32_t highWordBits = BitWidth % APINT_BITS_PER_WORD;
uint32_t shift = (highWordBits == 0 ? 0 : APINT_BITS_PER_WORD - highWordBits);
int i = getNumWords() - 1;
uint32_t Count = countLeadingOnes_64(pVal[i], shift);
if (Count == highWordBits) {
for (i--; i >= 0; --i) {
if (pVal[i] == -1ULL)
Count += APINT_BITS_PER_WORD;
else {
Count += countLeadingOnes_64(pVal[i], 0);
break;
}
}
}
return Count;
}
uint32_t APInt::countTrailingZeros() const {
if (isSingleWord())
return std::min(uint32_t(CountTrailingZeros_64(VAL)), BitWidth);
uint32_t Count = 0;
uint32_t i = 0;
for (; i < getNumWords() && pVal[i] == 0; ++i)
Count += APINT_BITS_PER_WORD;
if (i < getNumWords())
Count += CountTrailingZeros_64(pVal[i]);
return std::min(Count, BitWidth);
}
uint32_t APInt::countTrailingOnes() const {
if (isSingleWord())
return std::min(uint32_t(CountTrailingOnes_64(VAL)), BitWidth);
uint32_t Count = 0;
uint32_t i = 0;
for (; i < getNumWords() && pVal[i] == -1ULL; ++i)
Count += APINT_BITS_PER_WORD;
if (i < getNumWords())
Count += CountTrailingOnes_64(pVal[i]);
return std::min(Count, BitWidth);
}
uint32_t APInt::countPopulation() const {
if (isSingleWord())
return CountPopulation_64(VAL);
uint32_t Count = 0;
for (uint32_t i = 0; i < getNumWords(); ++i)
Count += CountPopulation_64(pVal[i]);
return Count;
}
APInt APInt::byteSwap() const {
assert(BitWidth >= 16 && BitWidth % 16 == 0 && "Cannot byteswap!");
if (BitWidth == 16)
return APInt(BitWidth, ByteSwap_16(uint16_t(VAL)));
else if (BitWidth == 32)
return APInt(BitWidth, ByteSwap_32(uint32_t(VAL)));
else if (BitWidth == 48) {
uint32_t Tmp1 = uint32_t(VAL >> 16);
Tmp1 = ByteSwap_32(Tmp1);
uint16_t Tmp2 = uint16_t(VAL);
Tmp2 = ByteSwap_16(Tmp2);
return APInt(BitWidth, (uint64_t(Tmp2) << 32) | Tmp1);
} else if (BitWidth == 64)
return APInt(BitWidth, ByteSwap_64(VAL));
else {
APInt Result(BitWidth, 0);
char *pByte = (char*)Result.pVal;
for (uint32_t i = 0; i < BitWidth / APINT_WORD_SIZE / 2; ++i) {
char Tmp = pByte[i];
pByte[i] = pByte[BitWidth / APINT_WORD_SIZE - 1 - i];
pByte[BitWidth / APINT_WORD_SIZE - i - 1] = Tmp;
}
return Result;
}
}
APInt llvm::APIntOps::GreatestCommonDivisor(const APInt& API1,
const APInt& API2) {
APInt A = API1, B = API2;
while (!!B) {
APInt T = B;
B = APIntOps::urem(A, B);
A = T;
}
return A;
}
APInt llvm::APIntOps::RoundDoubleToAPInt(double Double, uint32_t width) {
union {
double D;
uint64_t I;
} T;
T.D = Double;
// Get the sign bit from the highest order bit
bool isNeg = T.I >> 63;
// Get the 11-bit exponent and adjust for the 1023 bit bias
int64_t exp = ((T.I >> 52) & 0x7ff) - 1023;
// If the exponent is negative, the value is < 0 so just return 0.
if (exp < 0)
return APInt(width, 0u);
// Extract the mantissa by clearing the top 12 bits (sign + exponent).
uint64_t mantissa = (T.I & (~0ULL >> 12)) | 1ULL << 52;
// If the exponent doesn't shift all bits out of the mantissa
if (exp < 52)
return isNeg ? -APInt(width, mantissa >> (52 - exp)) :
APInt(width, mantissa >> (52 - exp));
// If the client didn't provide enough bits for us to shift the mantissa into
// then the result is undefined, just return 0
if (width <= exp - 52)
return APInt(width, 0);
// Otherwise, we have to shift the mantissa bits up to the right location
APInt Tmp(width, mantissa);
Tmp = Tmp.shl((uint32_t)exp - 52);
return isNeg ? -Tmp : Tmp;
}
/// RoundToDouble - This function convert this APInt to a double.
/// The layout for double is as following (IEEE Standard 754):
/// --------------------------------------
/// | Sign Exponent Fraction Bias |
/// |-------------------------------------- |
/// | 1[63] 11[62-52] 52[51-00] 1023 |
/// --------------------------------------
double APInt::roundToDouble(bool isSigned) const {
// Handle the simple case where the value is contained in one uint64_t.
if (isSingleWord() || getActiveBits() <= APINT_BITS_PER_WORD) {
if (isSigned) {
int64_t sext = (int64_t(VAL) << (64-BitWidth)) >> (64-BitWidth);
return double(sext);
} else
return double(VAL);
}
// Determine if the value is negative.
bool isNeg = isSigned ? (*this)[BitWidth-1] : false;
// Construct the absolute value if we're negative.
APInt Tmp(isNeg ? -(*this) : (*this));
// Figure out how many bits we're using.
uint32_t n = Tmp.getActiveBits();
// The exponent (without bias normalization) is just the number of bits
// we are using. Note that the sign bit is gone since we constructed the
// absolute value.
uint64_t exp = n;
// Return infinity for exponent overflow
if (exp > 1023) {
if (!isSigned || !isNeg)
return std::numeric_limits<double>::infinity();
else
return -std::numeric_limits<double>::infinity();
}
exp += 1023; // Increment for 1023 bias
// Number of bits in mantissa is 52. To obtain the mantissa value, we must
// extract the high 52 bits from the correct words in pVal.
uint64_t mantissa;
unsigned hiWord = whichWord(n-1);
if (hiWord == 0) {
mantissa = Tmp.pVal[0];
if (n > 52)
mantissa >>= n - 52; // shift down, we want the top 52 bits.
} else {
assert(hiWord > 0 && "huh?");
uint64_t hibits = Tmp.pVal[hiWord] << (52 - n % APINT_BITS_PER_WORD);
uint64_t lobits = Tmp.pVal[hiWord-1] >> (11 + n % APINT_BITS_PER_WORD);
mantissa = hibits | lobits;
}
// The leading bit of mantissa is implicit, so get rid of it.
uint64_t sign = isNeg ? (1ULL << (APINT_BITS_PER_WORD - 1)) : 0;
union {
double D;
uint64_t I;
} T;
T.I = sign | (exp << 52) | mantissa;
return T.D;
}
// Truncate to new width.
APInt &APInt::trunc(uint32_t width) {
assert(width < BitWidth && "Invalid APInt Truncate request");
assert(width >= MIN_INT_BITS && "Can't truncate to 0 bits");
uint32_t wordsBefore = getNumWords();
BitWidth = width;
uint32_t wordsAfter = getNumWords();
if (wordsBefore != wordsAfter) {
if (wordsAfter == 1) {
uint64_t *tmp = pVal;
VAL = pVal[0];
delete [] tmp;
} else {
uint64_t *newVal = getClearedMemory(wordsAfter);
for (uint32_t i = 0; i < wordsAfter; ++i)
newVal[i] = pVal[i];
delete [] pVal;
pVal = newVal;
}
}
return clearUnusedBits();
}
// Sign extend to a new width.
APInt &APInt::sext(uint32_t width) {
assert(width > BitWidth && "Invalid APInt SignExtend request");
assert(width <= MAX_INT_BITS && "Too many bits");
// If the sign bit isn't set, this is the same as zext.
if (!isNegative()) {
zext(width);
return *this;
}
// The sign bit is set. First, get some facts
uint32_t wordsBefore = getNumWords();
uint32_t wordBits = BitWidth % APINT_BITS_PER_WORD;
BitWidth = width;
uint32_t wordsAfter = getNumWords();
// Mask the high order word appropriately
if (wordsBefore == wordsAfter) {
uint32_t newWordBits = width % APINT_BITS_PER_WORD;
// The extension is contained to the wordsBefore-1th word.
uint64_t mask = ~0ULL;
if (newWordBits)
mask >>= APINT_BITS_PER_WORD - newWordBits;
mask <<= wordBits;
if (wordsBefore == 1)
VAL |= mask;
else
pVal[wordsBefore-1] |= mask;
return clearUnusedBits();
}
uint64_t mask = wordBits == 0 ? 0 : ~0ULL << wordBits;
uint64_t *newVal = getMemory(wordsAfter);
if (wordsBefore == 1)
newVal[0] = VAL | mask;
else {
for (uint32_t i = 0; i < wordsBefore; ++i)
newVal[i] = pVal[i];
newVal[wordsBefore-1] |= mask;
}
for (uint32_t i = wordsBefore; i < wordsAfter; i++)
newVal[i] = -1ULL;
if (wordsBefore != 1)
delete [] pVal;
pVal = newVal;
return clearUnusedBits();
}
// Zero extend to a new width.
APInt &APInt::zext(uint32_t width) {
assert(width > BitWidth && "Invalid APInt ZeroExtend request");
assert(width <= MAX_INT_BITS && "Too many bits");
uint32_t wordsBefore = getNumWords();
BitWidth = width;
uint32_t wordsAfter = getNumWords();
if (wordsBefore != wordsAfter) {
uint64_t *newVal = getClearedMemory(wordsAfter);
if (wordsBefore == 1)
newVal[0] = VAL;
else
for (uint32_t i = 0; i < wordsBefore; ++i)
newVal[i] = pVal[i];
if (wordsBefore != 1)
delete [] pVal;
pVal = newVal;
}
return *this;
}
APInt &APInt::zextOrTrunc(uint32_t width) {
if (BitWidth < width)
return zext(width);
if (BitWidth > width)
return trunc(width);
return *this;
}
APInt &APInt::sextOrTrunc(uint32_t width) {
if (BitWidth < width)
return sext(width);
if (BitWidth > width)
return trunc(width);
return *this;
}
/// Arithmetic right-shift this APInt by shiftAmt.
/// @brief Arithmetic right-shift function.
APInt APInt::ashr(const APInt &shiftAmt) const {
return ashr((uint32_t)shiftAmt.getLimitedValue(BitWidth));
}
/// Arithmetic right-shift this APInt by shiftAmt.
/// @brief Arithmetic right-shift function.
APInt APInt::ashr(uint32_t shiftAmt) const {
assert(shiftAmt <= BitWidth && "Invalid shift amount");
// Handle a degenerate case
if (shiftAmt == 0)
return *this;
// Handle single word shifts with built-in ashr
if (isSingleWord()) {
if (shiftAmt == BitWidth)
return APInt(BitWidth, 0); // undefined
else {
uint32_t SignBit = APINT_BITS_PER_WORD - BitWidth;
return APInt(BitWidth,
(((int64_t(VAL) << SignBit) >> SignBit) >> shiftAmt));
}
}
// If all the bits were shifted out, the result is, technically, undefined.
// We return -1 if it was negative, 0 otherwise. We check this early to avoid
// issues in the algorithm below.
if (shiftAmt == BitWidth) {
if (isNegative())
return APInt(BitWidth, -1ULL, true);
else
return APInt(BitWidth, 0);
}
// Create some space for the result.
uint64_t * val = new uint64_t[getNumWords()];
// Compute some values needed by the following shift algorithms
uint32_t wordShift = shiftAmt % APINT_BITS_PER_WORD; // bits to shift per word
uint32_t offset = shiftAmt / APINT_BITS_PER_WORD; // word offset for shift
uint32_t breakWord = getNumWords() - 1 - offset; // last word affected
uint32_t bitsInWord = whichBit(BitWidth); // how many bits in last word?
if (bitsInWord == 0)
bitsInWord = APINT_BITS_PER_WORD;
// If we are shifting whole words, just move whole words
if (wordShift == 0) {
// Move the words containing significant bits
for (uint32_t i = 0; i <= breakWord; ++i)
val[i] = pVal[i+offset]; // move whole word
// Adjust the top significant word for sign bit fill, if negative
if (isNegative())
if (bitsInWord < APINT_BITS_PER_WORD)
val[breakWord] |= ~0ULL << bitsInWord; // set high bits
} else {
// Shift the low order words
for (uint32_t i = 0; i < breakWord; ++i) {
// This combines the shifted corresponding word with the low bits from
// the next word (shifted into this word's high bits).
val[i] = (pVal[i+offset] >> wordShift) |
(pVal[i+offset+1] << (APINT_BITS_PER_WORD - wordShift));
}
// Shift the break word. In this case there are no bits from the next word
// to include in this word.
val[breakWord] = pVal[breakWord+offset] >> wordShift;
// Deal with sign extenstion in the break word, and possibly the word before
// it.
if (isNegative()) {
if (wordShift > bitsInWord) {
if (breakWord > 0)
val[breakWord-1] |=
~0ULL << (APINT_BITS_PER_WORD - (wordShift - bitsInWord));
val[breakWord] |= ~0ULL;
} else
val[breakWord] |= (~0ULL << (bitsInWord - wordShift));
}
}
// Remaining words are 0 or -1, just assign them.
uint64_t fillValue = (isNegative() ? -1ULL : 0);
for (uint32_t i = breakWord+1; i < getNumWords(); ++i)
val[i] = fillValue;
return APInt(val, BitWidth).clearUnusedBits();
}
/// Logical right-shift this APInt by shiftAmt.
/// @brief Logical right-shift function.
APInt APInt::lshr(const APInt &shiftAmt) const {
return lshr((uint32_t)shiftAmt.getLimitedValue(BitWidth));
}
/// Logical right-shift this APInt by shiftAmt.
/// @brief Logical right-shift function.
APInt APInt::lshr(uint32_t shiftAmt) const {
if (isSingleWord()) {
if (shiftAmt == BitWidth)
return APInt(BitWidth, 0);
else
return APInt(BitWidth, this->VAL >> shiftAmt);
}
// If all the bits were shifted out, the result is 0. This avoids issues
// with shifting by the size of the integer type, which produces undefined
// results. We define these "undefined results" to always be 0.
if (shiftAmt == BitWidth)
return APInt(BitWidth, 0);
// If none of the bits are shifted out, the result is *this. This avoids
// issues with shifting byt he size of the integer type, which produces
// undefined results in the code below. This is also an optimization.
if (shiftAmt == 0)
return *this;
// Create some space for the result.
uint64_t * val = new uint64_t[getNumWords()];
// If we are shifting less than a word, compute the shift with a simple carry
if (shiftAmt < APINT_BITS_PER_WORD) {
uint64_t carry = 0;
for (int i = getNumWords()-1; i >= 0; --i) {
val[i] = (pVal[i] >> shiftAmt) | carry;
carry = pVal[i] << (APINT_BITS_PER_WORD - shiftAmt);
}
return APInt(val, BitWidth).clearUnusedBits();
}
// Compute some values needed by the remaining shift algorithms
uint32_t wordShift = shiftAmt % APINT_BITS_PER_WORD;
uint32_t offset = shiftAmt / APINT_BITS_PER_WORD;
// If we are shifting whole words, just move whole words
if (wordShift == 0) {
for (uint32_t i = 0; i < getNumWords() - offset; ++i)
val[i] = pVal[i+offset];
for (uint32_t i = getNumWords()-offset; i < getNumWords(); i++)
val[i] = 0;
return APInt(val,BitWidth).clearUnusedBits();
}
// Shift the low order words
uint32_t breakWord = getNumWords() - offset -1;
for (uint32_t i = 0; i < breakWord; ++i)
val[i] = (pVal[i+offset] >> wordShift) |
(pVal[i+offset+1] << (APINT_BITS_PER_WORD - wordShift));
// Shift the break word.
val[breakWord] = pVal[breakWord+offset] >> wordShift;
// Remaining words are 0
for (uint32_t i = breakWord+1; i < getNumWords(); ++i)
val[i] = 0;
return APInt(val, BitWidth).clearUnusedBits();
}
/// Left-shift this APInt by shiftAmt.
/// @brief Left-shift function.
APInt APInt::shl(const APInt &shiftAmt) const {
// It's undefined behavior in C to shift by BitWidth or greater, but
return shl((uint32_t)shiftAmt.getLimitedValue(BitWidth));
}
/// Left-shift this APInt by shiftAmt.
/// @brief Left-shift function.
APInt APInt::shl(uint32_t shiftAmt) const {
assert(shiftAmt <= BitWidth && "Invalid shift amount");
if (isSingleWord()) {
if (shiftAmt == BitWidth)
return APInt(BitWidth, 0); // avoid undefined shift results
return APInt(BitWidth, VAL << shiftAmt);
}
// If all the bits were shifted out, the result is 0. This avoids issues
// with shifting by the size of the integer type, which produces undefined
// results. We define these "undefined results" to always be 0.
if (shiftAmt == BitWidth)
return APInt(BitWidth, 0);
// If none of the bits are shifted out, the result is *this. This avoids a
// lshr by the words size in the loop below which can produce incorrect
// results. It also avoids the expensive computation below for a common case.
if (shiftAmt == 0)
return *this;
// Create some space for the result.
uint64_t * val = new uint64_t[getNumWords()];
// If we are shifting less than a word, do it the easy way
if (shiftAmt < APINT_BITS_PER_WORD) {
uint64_t carry = 0;
for (uint32_t i = 0; i < getNumWords(); i++) {
val[i] = pVal[i] << shiftAmt | carry;
carry = pVal[i] >> (APINT_BITS_PER_WORD - shiftAmt);
}
return APInt(val, BitWidth).clearUnusedBits();
}
// Compute some values needed by the remaining shift algorithms
uint32_t wordShift = shiftAmt % APINT_BITS_PER_WORD;
uint32_t offset = shiftAmt / APINT_BITS_PER_WORD;
// If we are shifting whole words, just move whole words
if (wordShift == 0) {
for (uint32_t i = 0; i < offset; i++)
val[i] = 0;
for (uint32_t i = offset; i < getNumWords(); i++)
val[i] = pVal[i-offset];
return APInt(val,BitWidth).clearUnusedBits();
}
// Copy whole words from this to Result.
uint32_t i = getNumWords() - 1;
for (; i > offset; --i)
val[i] = pVal[i-offset] << wordShift |
pVal[i-offset-1] >> (APINT_BITS_PER_WORD - wordShift);
val[offset] = pVal[0] << wordShift;
for (i = 0; i < offset; ++i)
val[i] = 0;
return APInt(val, BitWidth).clearUnusedBits();
}
APInt APInt::rotl(const APInt &rotateAmt) const {
return rotl((uint32_t)rotateAmt.getLimitedValue(BitWidth));
}
APInt APInt::rotl(uint32_t rotateAmt) const {
if (rotateAmt == 0)
return *this;
// Don't get too fancy, just use existing shift/or facilities
APInt hi(*this);
APInt lo(*this);
hi.shl(rotateAmt);
lo.lshr(BitWidth - rotateAmt);
return hi | lo;
}
APInt APInt::rotr(const APInt &rotateAmt) const {
return rotr((uint32_t)rotateAmt.getLimitedValue(BitWidth));
}
APInt APInt::rotr(uint32_t rotateAmt) const {
if (rotateAmt == 0)
return *this;
// Don't get too fancy, just use existing shift/or facilities
APInt hi(*this);
APInt lo(*this);
lo.lshr(rotateAmt);
hi.shl(BitWidth - rotateAmt);
return hi | lo;
}
// Square Root - this method computes and returns the square root of "this".
// Three mechanisms are used for computation. For small values (<= 5 bits),
// a table lookup is done. This gets some performance for common cases. For
// values using less than 52 bits, the value is converted to double and then
// the libc sqrt function is called. The result is rounded and then converted
// back to a uint64_t which is then used to construct the result. Finally,
// the Babylonian method for computing square roots is used.
APInt APInt::sqrt() const {
// Determine the magnitude of the value.
uint32_t magnitude = getActiveBits();
// Use a fast table for some small values. This also gets rid of some
// rounding errors in libc sqrt for small values.
if (magnitude <= 5) {
static const uint8_t results[32] = {
/* 0 */ 0,
/* 1- 2 */ 1, 1,
/* 3- 6 */ 2, 2, 2, 2,
/* 7-12 */ 3, 3, 3, 3, 3, 3,
/* 13-20 */ 4, 4, 4, 4, 4, 4, 4, 4,
/* 21-30 */ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
/* 31 */ 6
};
return APInt(BitWidth, results[ (isSingleWord() ? VAL : pVal[0]) ]);
}
// If the magnitude of the value fits in less than 52 bits (the precision of
// an IEEE double precision floating point value), then we can use the
// libc sqrt function which will probably use a hardware sqrt computation.
// This should be faster than the algorithm below.
if (magnitude < 52) {
#ifdef _MSC_VER
// Amazingly, VC++ doesn't have round().
return APInt(BitWidth,
uint64_t(::sqrt(double(isSingleWord()?VAL:pVal[0]))) + 0.5);
#else
return APInt(BitWidth,
uint64_t(::round(::sqrt(double(isSingleWord()?VAL:pVal[0])))));
#endif
}
// Okay, all the short cuts are exhausted. We must compute it. The following
// is a classical Babylonian method for computing the square root. This code
// was adapted to APINt from a wikipedia article on such computations.
// See http://www.wikipedia.org/ and go to the page named
// Calculate_an_integer_square_root.
uint32_t nbits = BitWidth, i = 4;
APInt testy(BitWidth, 16);
APInt x_old(BitWidth, 1);
APInt x_new(BitWidth, 0);
APInt two(BitWidth, 2);
// Select a good starting value using binary logarithms.
for (;; i += 2, testy = testy.shl(2))
if (i >= nbits || this->ule(testy)) {
x_old = x_old.shl(i / 2);
break;
}
// Use the Babylonian method to arrive at the integer square root:
for (;;) {
x_new = (this->udiv(x_old) + x_old).udiv(two);
if (x_old.ule(x_new))
break;
x_old = x_new;
}
// Make sure we return the closest approximation
// NOTE: The rounding calculation below is correct. It will produce an
// off-by-one discrepancy with results from pari/gp. That discrepancy has been
// determined to be a rounding issue with pari/gp as it begins to use a
// floating point representation after 192 bits. There are no discrepancies
// between this algorithm and pari/gp for bit widths < 192 bits.
APInt square(x_old * x_old);
APInt nextSquare((x_old + 1) * (x_old +1));
if (this->ult(square))
return x_old;
else if (this->ule(nextSquare)) {
APInt midpoint((nextSquare - square).udiv(two));
APInt offset(*this - square);
if (offset.ult(midpoint))
return x_old;
else
return x_old + 1;
} else
assert(0 && "Error in APInt::sqrt computation");
return x_old + 1;
}
/// Implementation of Knuth's Algorithm D (Division of nonnegative integers)
/// from "Art of Computer Programming, Volume 2", section 4.3.1, p. 272. The
/// variables here have the same names as in the algorithm. Comments explain
/// the algorithm and any deviation from it.
static void KnuthDiv(uint32_t *u, uint32_t *v, uint32_t *q, uint32_t* r,
uint32_t m, uint32_t n) {
assert(u && "Must provide dividend");
assert(v && "Must provide divisor");
assert(q && "Must provide quotient");
assert(u != v && u != q && v != q && "Must us different memory");
assert(n>1 && "n must be > 1");
// Knuth uses the value b as the base of the number system. In our case b
// is 2^31 so we just set it to -1u.
uint64_t b = uint64_t(1) << 32;
DEBUG(cerr << "KnuthDiv: m=" << m << " n=" << n << '\n');
DEBUG(cerr << "KnuthDiv: original:");
DEBUG(for (int i = m+n; i >=0; i--) cerr << " " << std::setbase(16) << u[i]);
DEBUG(cerr << " by");
DEBUG(for (int i = n; i >0; i--) cerr << " " << std::setbase(16) << v[i-1]);
DEBUG(cerr << '\n');
// D1. [Normalize.] Set d = b / (v[n-1] + 1) and multiply all the digits of
// u and v by d. Note that we have taken Knuth's advice here to use a power
// of 2 value for d such that d * v[n-1] >= b/2 (b is the base). A power of
// 2 allows us to shift instead of multiply and it is easy to determine the
// shift amount from the leading zeros. We are basically normalizing the u
// and v so that its high bits are shifted to the top of v's range without
// overflow. Note that this can require an extra word in u so that u must
// be of length m+n+1.
uint32_t shift = CountLeadingZeros_32(v[n-1]);
uint32_t v_carry = 0;
uint32_t u_carry = 0;
if (shift) {
for (uint32_t i = 0; i < m+n; ++i) {
uint32_t u_tmp = u[i] >> (32 - shift);
u[i] = (u[i] << shift) | u_carry;
u_carry = u_tmp;
}
for (uint32_t i = 0; i < n; ++i) {
uint32_t v_tmp = v[i] >> (32 - shift);
v[i] = (v[i] << shift) | v_carry;
v_carry = v_tmp;
}
}
u[m+n] = u_carry;
DEBUG(cerr << "KnuthDiv: normal:");
DEBUG(for (int i = m+n; i >=0; i--) cerr << " " << std::setbase(16) << u[i]);
DEBUG(cerr << " by");
DEBUG(for (int i = n; i >0; i--) cerr << " " << std::setbase(16) << v[i-1]);
DEBUG(cerr << '\n');
// D2. [Initialize j.] Set j to m. This is the loop counter over the places.
int j = m;
do {
DEBUG(cerr << "KnuthDiv: quotient digit #" << j << '\n');
// D3. [Calculate q'.].
// Set qp = (u[j+n]*b + u[j+n-1]) / v[n-1]. (qp=qprime=q')
// Set rp = (u[j+n]*b + u[j+n-1]) % v[n-1]. (rp=rprime=r')
// Now test if qp == b or qp*v[n-2] > b*rp + u[j+n-2]; if so, decrease
// qp by 1, inrease rp by v[n-1], and repeat this test if rp < b. The test
// on v[n-2] determines at high speed most of the cases in which the trial
// value qp is one too large, and it eliminates all cases where qp is two
// too large.
uint64_t dividend = ((uint64_t(u[j+n]) << 32) + u[j+n-1]);
DEBUG(cerr << "KnuthDiv: dividend == " << dividend << '\n');
uint64_t qp = dividend / v[n-1];
uint64_t rp = dividend % v[n-1];
if (qp == b || qp*v[n-2] > b*rp + u[j+n-2]) {
qp--;
rp += v[n-1];
if (rp < b && (qp == b || qp*v[n-2] > b*rp + u[j+n-2]))
qp--;
}
DEBUG(cerr << "KnuthDiv: qp == " << qp << ", rp == " << rp << '\n');
// D4. [Multiply and subtract.] Replace (u[j+n]u[j+n-1]...u[j]) with
// (u[j+n]u[j+n-1]..u[j]) - qp * (v[n-1]...v[1]v[0]). This computation
// consists of a simple multiplication by a one-place number, combined with
// a subtraction.
bool isNeg = false;
for (uint32_t i = 0; i < n; ++i) {
uint64_t u_tmp = uint64_t(u[j+i]) | (uint64_t(u[j+i+1]) << 32);
uint64_t subtrahend = uint64_t(qp) * uint64_t(v[i]);
bool borrow = subtrahend > u_tmp;
DEBUG(cerr << "KnuthDiv: u_tmp == " << u_tmp
<< ", subtrahend == " << subtrahend
<< ", borrow = " << borrow << '\n');
uint64_t result = u_tmp - subtrahend;
uint32_t k = j + i;
u[k++] = (uint32_t)(result & (b-1)); // subtract low word
u[k++] = (uint32_t)(result >> 32); // subtract high word
while (borrow && k <= m+n) { // deal with borrow to the left
borrow = u[k] == 0;
u[k]--;
k++;
}
isNeg |= borrow;
DEBUG(cerr << "KnuthDiv: u[j+i] == " << u[j+i] << ", u[j+i+1] == " <<
u[j+i+1] << '\n');
}
DEBUG(cerr << "KnuthDiv: after subtraction:");
DEBUG(for (int i = m+n; i >=0; i--) cerr << " " << u[i]);
DEBUG(cerr << '\n');
// The digits (u[j+n]...u[j]) should be kept positive; if the result of
// this step is actually negative, (u[j+n]...u[j]) should be left as the
// true value plus b**(n+1), namely as the b's complement of
// the true value, and a "borrow" to the left should be remembered.
//
if (isNeg) {
bool carry = true; // true because b's complement is "complement + 1"
for (uint32_t i = 0; i <= m+n; ++i) {
u[i] = ~u[i] + carry; // b's complement
carry = carry && u[i] == 0;
}
}
DEBUG(cerr << "KnuthDiv: after complement:");
DEBUG(for (int i = m+n; i >=0; i--) cerr << " " << u[i]);
DEBUG(cerr << '\n');
// D5. [Test remainder.] Set q[j] = qp. If the result of step D4 was
// negative, go to step D6; otherwise go on to step D7.
q[j] = (uint32_t)qp;
if (isNeg) {
// D6. [Add back]. The probability that this step is necessary is very
// small, on the order of only 2/b. Make sure that test data accounts for
// this possibility. Decrease q[j] by 1
q[j]--;
// and add (0v[n-1]...v[1]v[0]) to (u[j+n]u[j+n-1]...u[j+1]u[j]).
// A carry will occur to the left of u[j+n], and it should be ignored
// since it cancels with the borrow that occurred in D4.
bool carry = false;
for (uint32_t i = 0; i < n; i++) {
uint32_t limit = std::min(u[j+i],v[i]);
u[j+i] += v[i] + carry;
carry = u[j+i] < limit || (carry && u[j+i] == limit);
}
u[j+n] += carry;
}
DEBUG(cerr << "KnuthDiv: after correction:");
DEBUG(for (int i = m+n; i >=0; i--) cerr <<" " << u[i]);
DEBUG(cerr << "\nKnuthDiv: digit result = " << q[j] << '\n');
// D7. [Loop on j.] Decrease j by one. Now if j >= 0, go back to D3.
} while (--j >= 0);
DEBUG(cerr << "KnuthDiv: quotient:");
DEBUG(for (int i = m; i >=0; i--) cerr <<" " << q[i]);
DEBUG(cerr << '\n');
// D8. [Unnormalize]. Now q[...] is the desired quotient, and the desired
// remainder may be obtained by dividing u[...] by d. If r is non-null we
// compute the remainder (urem uses this).
if (r) {
// The value d is expressed by the "shift" value above since we avoided
// multiplication by d by using a shift left. So, all we have to do is
// shift right here. In order to mak
if (shift) {
uint32_t carry = 0;
DEBUG(cerr << "KnuthDiv: remainder:");
for (int i = n-1; i >= 0; i--) {
r[i] = (u[i] >> shift) | carry;
carry = u[i] << (32 - shift);
DEBUG(cerr << " " << r[i]);
}
} else {
for (int i = n-1; i >= 0; i--) {
r[i] = u[i];
DEBUG(cerr << " " << r[i]);
}
}
DEBUG(cerr << '\n');
}
DEBUG(cerr << std::setbase(10) << '\n');
}
void APInt::divide(const APInt LHS, uint32_t lhsWords,
const APInt &RHS, uint32_t rhsWords,
APInt *Quotient, APInt *Remainder)
{
assert(lhsWords >= rhsWords && "Fractional result");
// First, compose the values into an array of 32-bit words instead of
// 64-bit words. This is a necessity of both the "short division" algorithm
// and the the Knuth "classical algorithm" which requires there to be native
// operations for +, -, and * on an m bit value with an m*2 bit result. We
// can't use 64-bit operands here because we don't have native results of
// 128-bits. Furthremore, casting the 64-bit values to 32-bit values won't
// work on large-endian machines.
uint64_t mask = ~0ull >> (sizeof(uint32_t)*8);
uint32_t n = rhsWords * 2;
uint32_t m = (lhsWords * 2) - n;
// Allocate space for the temporary values we need either on the stack, if
// it will fit, or on the heap if it won't.
uint32_t SPACE[128];
uint32_t *U = 0;
uint32_t *V = 0;
uint32_t *Q = 0;
uint32_t *R = 0;
if ((Remainder?4:3)*n+2*m+1 <= 128) {
U = &SPACE[0];
V = &SPACE[m+n+1];
Q = &SPACE[(m+n+1) + n];
if (Remainder)
R = &SPACE[(m+n+1) + n + (m+n)];
} else {
U = new uint32_t[m + n + 1];
V = new uint32_t[n];
Q = new uint32_t[m+n];
if (Remainder)
R = new uint32_t[n];
}
// Initialize the dividend
memset(U, 0, (m+n+1)*sizeof(uint32_t));
for (unsigned i = 0; i < lhsWords; ++i) {
uint64_t tmp = (LHS.getNumWords() == 1 ? LHS.VAL : LHS.pVal[i]);
U[i * 2] = (uint32_t)(tmp & mask);
U[i * 2 + 1] = (uint32_t)(tmp >> (sizeof(uint32_t)*8));
}
U[m+n] = 0; // this extra word is for "spill" in the Knuth algorithm.
// Initialize the divisor
memset(V, 0, (n)*sizeof(uint32_t));
for (unsigned i = 0; i < rhsWords; ++i) {
uint64_t tmp = (RHS.getNumWords() == 1 ? RHS.VAL : RHS.pVal[i]);
V[i * 2] = (uint32_t)(tmp & mask);
V[i * 2 + 1] = (uint32_t)(tmp >> (sizeof(uint32_t)*8));
}
// initialize the quotient and remainder
memset(Q, 0, (m+n) * sizeof(uint32_t));
if (Remainder)
memset(R, 0, n * sizeof(uint32_t));
// Now, adjust m and n for the Knuth division. n is the number of words in
// the divisor. m is the number of words by which the dividend exceeds the
// divisor (i.e. m+n is the length of the dividend). These sizes must not
// contain any zero words or the Knuth algorithm fails.
for (unsigned i = n; i > 0 && V[i-1] == 0; i--) {
n--;
m++;
}
for (unsigned i = m+n; i > 0 && U[i-1] == 0; i--)
m--;
// If we're left with only a single word for the divisor, Knuth doesn't work
// so we implement the short division algorithm here. This is much simpler
// and faster because we are certain that we can divide a 64-bit quantity
// by a 32-bit quantity at hardware speed and short division is simply a
// series of such operations. This is just like doing short division but we
// are using base 2^32 instead of base 10.
assert(n != 0 && "Divide by zero?");
if (n == 1) {
uint32_t divisor = V[0];
uint32_t remainder = 0;
for (int i = m+n-1; i >= 0; i--) {
uint64_t partial_dividend = uint64_t(remainder) << 32 | U[i];
if (partial_dividend == 0) {
Q[i] = 0;
remainder = 0;
} else if (partial_dividend < divisor) {
Q[i] = 0;
remainder = (uint32_t)partial_dividend;
} else if (partial_dividend == divisor) {
Q[i] = 1;
remainder = 0;
} else {
Q[i] = (uint32_t)(partial_dividend / divisor);
remainder = (uint32_t)(partial_dividend - (Q[i] * divisor));
}
}
if (R)
R[0] = remainder;
} else {
// Now we're ready to invoke the Knuth classical divide algorithm. In this
// case n > 1.
KnuthDiv(U, V, Q, R, m, n);
}
// If the caller wants the quotient
if (Quotient) {
// Set up the Quotient value's memory.
if (Quotient->BitWidth != LHS.BitWidth) {
if (Quotient->isSingleWord())
Quotient->VAL = 0;
else
delete [] Quotient->pVal;
Quotient->BitWidth = LHS.BitWidth;
if (!Quotient->isSingleWord())
Quotient->pVal = getClearedMemory(Quotient->getNumWords());
} else
Quotient->clear();
// The quotient is in Q. Reconstitute the quotient into Quotient's low
// order words.
if (lhsWords == 1) {
uint64_t tmp =
uint64_t(Q[0]) | (uint64_t(Q[1]) << (APINT_BITS_PER_WORD / 2));
if (Quotient->isSingleWord())
Quotient->VAL = tmp;
else
Quotient->pVal[0] = tmp;
} else {
assert(!Quotient->isSingleWord() && "Quotient APInt not large enough");
for (unsigned i = 0; i < lhsWords; ++i)
Quotient->pVal[i] =
uint64_t(Q[i*2]) | (uint64_t(Q[i*2+1]) << (APINT_BITS_PER_WORD / 2));
}
}
// If the caller wants the remainder
if (Remainder) {
// Set up the Remainder value's memory.
if (Remainder->BitWidth != RHS.BitWidth) {
if (Remainder->isSingleWord())
Remainder->VAL = 0;
else
delete [] Remainder->pVal;
Remainder->BitWidth = RHS.BitWidth;
if (!Remainder->isSingleWord())
Remainder->pVal = getClearedMemory(Remainder->getNumWords());
} else
Remainder->clear();
// The remainder is in R. Reconstitute the remainder into Remainder's low
// order words.
if (rhsWords == 1) {
uint64_t tmp =
uint64_t(R[0]) | (uint64_t(R[1]) << (APINT_BITS_PER_WORD / 2));
if (Remainder->isSingleWord())
Remainder->VAL = tmp;
else
Remainder->pVal[0] = tmp;
} else {
assert(!Remainder->isSingleWord() && "Remainder APInt not large enough");
for (unsigned i = 0; i < rhsWords; ++i)
Remainder->pVal[i] =
uint64_t(R[i*2]) | (uint64_t(R[i*2+1]) << (APINT_BITS_PER_WORD / 2));
}
}
// Clean up the memory we allocated.
if (U != &SPACE[0]) {
delete [] U;
delete [] V;
delete [] Q;
delete [] R;
}
}
APInt APInt::udiv(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
// First, deal with the easy case
if (isSingleWord()) {
assert(RHS.VAL != 0 && "Divide by zero?");
return APInt(BitWidth, VAL / RHS.VAL);
}
// Get some facts about the LHS and RHS number of bits and words
uint32_t rhsBits = RHS.getActiveBits();
uint32_t rhsWords = !rhsBits ? 0 : (APInt::whichWord(rhsBits - 1) + 1);
assert(rhsWords && "Divided by zero???");
uint32_t lhsBits = this->getActiveBits();
uint32_t lhsWords = !lhsBits ? 0 : (APInt::whichWord(lhsBits - 1) + 1);
// Deal with some degenerate cases
if (!lhsWords)
// 0 / X ===> 0
return APInt(BitWidth, 0);
else if (lhsWords < rhsWords || this->ult(RHS)) {
// X / Y ===> 0, iff X < Y
return APInt(BitWidth, 0);
} else if (*this == RHS) {
// X / X ===> 1
return APInt(BitWidth, 1);
} else if (lhsWords == 1 && rhsWords == 1) {
// All high words are zero, just use native divide
return APInt(BitWidth, this->pVal[0] / RHS.pVal[0]);
}
// We have to compute it the hard way. Invoke the Knuth divide algorithm.
APInt Quotient(1,0); // to hold result.
divide(*this, lhsWords, RHS, rhsWords, &Quotient, 0);
return Quotient;
}
APInt APInt::urem(const APInt& RHS) const {
assert(BitWidth == RHS.BitWidth && "Bit widths must be the same");
if (isSingleWord()) {
assert(RHS.VAL != 0 && "Remainder by zero?");
return APInt(BitWidth, VAL % RHS.VAL);
}
// Get some facts about the LHS
uint32_t lhsBits = getActiveBits();
uint32_t lhsWords = !lhsBits ? 0 : (whichWord(lhsBits - 1) + 1);
// Get some facts about the RHS
uint32_t rhsBits = RHS.getActiveBits();
uint32_t rhsWords = !rhsBits ? 0 : (APInt::whichWord(rhsBits - 1) + 1);
assert(rhsWords && "Performing remainder operation by zero ???");
// Check the degenerate cases
if (lhsWords == 0) {
// 0 % Y ===> 0
return APInt(BitWidth, 0);
} else if (lhsWords < rhsWords || this->ult(RHS)) {
// X % Y ===> X, iff X < Y
return *this;
} else if (*this == RHS) {
// X % X == 0;
return APInt(BitWidth, 0);
} else if (lhsWords == 1) {
// All high words are zero, just use native remainder
return APInt(BitWidth, pVal[0] % RHS.pVal[0]);
}
// We have to compute it the hard way. Invoke the Knuth divide algorithm.
APInt Remainder(1,0);
divide(*this, lhsWords, RHS, rhsWords, 0, &Remainder);
return Remainder;
}
void APInt::udivrem(const APInt &LHS, const APInt &RHS,
APInt &Quotient, APInt &Remainder) {
// Get some size facts about the dividend and divisor
uint32_t lhsBits = LHS.getActiveBits();
uint32_t lhsWords = !lhsBits ? 0 : (APInt::whichWord(lhsBits - 1) + 1);
uint32_t rhsBits = RHS.getActiveBits();
uint32_t rhsWords = !rhsBits ? 0 : (APInt::whichWord(rhsBits - 1) + 1);
// Check the degenerate cases
if (lhsWords == 0) {
Quotient = 0; // 0 / Y ===> 0
Remainder = 0; // 0 % Y ===> 0
return;
}
if (lhsWords < rhsWords || LHS.ult(RHS)) {
Quotient = 0; // X / Y ===> 0, iff X < Y
Remainder = LHS; // X % Y ===> X, iff X < Y
return;
}
if (LHS == RHS) {
Quotient = 1; // X / X ===> 1
Remainder = 0; // X % X ===> 0;
return;
}
if (lhsWords == 1 && rhsWords == 1) {
// There is only one word to consider so use the native versions.
if (LHS.isSingleWord()) {
Quotient = APInt(LHS.getBitWidth(), LHS.VAL / RHS.VAL);
Remainder = APInt(LHS.getBitWidth(), LHS.VAL % RHS.VAL);
} else {
Quotient = APInt(LHS.getBitWidth(), LHS.pVal[0] / RHS.pVal[0]);
Remainder = APInt(LHS.getBitWidth(), LHS.pVal[0] % RHS.pVal[0]);
}
return;
}
// Okay, lets do it the long way
divide(LHS, lhsWords, RHS, rhsWords, &Quotient, &Remainder);
}
void APInt::fromString(uint32_t numbits, const char *str, uint32_t slen,
uint8_t radix) {
// Check our assumptions here
assert((radix == 10 || radix == 8 || radix == 16 || radix == 2) &&
"Radix should be 2, 8, 10, or 16!");
assert(str && "String is null?");
bool isNeg = str[0] == '-';
if (isNeg)
str++, slen--;
assert((slen <= numbits || radix != 2) && "Insufficient bit width");
assert((slen*3 <= numbits || radix != 8) && "Insufficient bit width");
assert((slen*4 <= numbits || radix != 16) && "Insufficient bit width");
assert(((slen*64)/22 <= numbits || radix != 10) && "Insufficient bit width");
// Allocate memory
if (!isSingleWord())
pVal = getClearedMemory(getNumWords());
// Figure out if we can shift instead of multiply
uint32_t shift = (radix == 16 ? 4 : radix == 8 ? 3 : radix == 2 ? 1 : 0);
// Set up an APInt for the digit to add outside the loop so we don't
// constantly construct/destruct it.
APInt apdigit(getBitWidth(), 0);
APInt apradix(getBitWidth(), radix);
// Enter digit traversal loop
for (unsigned i = 0; i < slen; i++) {
// Get a digit
uint32_t digit = 0;
char cdigit = str[i];
if (radix == 16) {
if (!isxdigit(cdigit))
assert(0 && "Invalid hex digit in string");
if (isdigit(cdigit))
digit = cdigit - '0';
else if (cdigit >= 'a')
digit = cdigit - 'a' + 10;
else if (cdigit >= 'A')
digit = cdigit - 'A' + 10;
else
assert(0 && "huh? we shouldn't get here");
} else if (isdigit(cdigit)) {
digit = cdigit - '0';
assert((radix == 10 ||
(radix == 8 && digit != 8 && digit != 9) ||
(radix == 2 && (digit == 0 || digit == 1))) &&
"Invalid digit in string for given radix");
} else {
assert(0 && "Invalid character in digit string");
}
// Shift or multiply the value by the radix
if (shift)
*this <<= shift;
else
*this *= apradix;
// Add in the digit we just interpreted
if (apdigit.isSingleWord())
apdigit.VAL = digit;
else
apdigit.pVal[0] = digit;
*this += apdigit;
}
// If its negative, put it in two's complement form
if (isNeg) {
(*this)--;
this->flip();
}
}
std::string APInt::toString(uint8_t radix, bool wantSigned) const {
assert((radix == 10 || radix == 8 || radix == 16 || radix == 2) &&
"Radix should be 2, 8, 10, or 16!");
static const char *const digits[] = {
"0","1","2","3","4","5","6","7","8","9","A","B","C","D","E","F"
};
std::string result;
uint32_t bits_used = getActiveBits();
if (isSingleWord()) {
char buf[65];
const char *format = (radix == 10 ? (wantSigned ? "%lld" : "%llu") :
(radix == 16 ? "%llX" : (radix == 8 ? "%llo" : 0)));
if (format) {
if (wantSigned) {
int64_t sextVal = (int64_t(VAL) << (APINT_BITS_PER_WORD-BitWidth)) >>
(APINT_BITS_PER_WORD-BitWidth);
sprintf(buf, format, sextVal);
} else
sprintf(buf, format, VAL);
} else {
memset(buf, 0, 65);
uint64_t v = VAL;
while (bits_used) {
uint32_t bit = (uint32_t)v & 1;
bits_used--;
buf[bits_used] = digits[bit][0];
v >>=1;
}
}
result = buf;
return result;
}
if (radix != 10) {
// For the 2, 8 and 16 bit cases, we can just shift instead of divide
// because the number of bits per digit (1,3 and 4 respectively) divides
// equaly. We just shift until there value is zero.
// First, check for a zero value and just short circuit the logic below.
if (*this == 0)
result = "0";
else {
APInt tmp(*this);
size_t insert_at = 0;
if (wantSigned && this->isNegative()) {
// They want to print the signed version and it is a negative value
// Flip the bits and add one to turn it into the equivalent positive
// value and put a '-' in the result.
tmp.flip();
tmp++;
result = "-";
insert_at = 1;
}
// Just shift tmp right for each digit width until it becomes zero
uint32_t shift = (radix == 16 ? 4 : (radix == 8 ? 3 : 1));
uint64_t mask = radix - 1;
APInt zero(tmp.getBitWidth(), 0);
while (tmp.ne(zero)) {
unsigned digit =
(unsigned)((tmp.isSingleWord() ? tmp.VAL : tmp.pVal[0]) & mask);
result.insert(insert_at, digits[digit]);
tmp = tmp.lshr(shift);
}
}
return result;
}
APInt tmp(*this);
APInt divisor(4, radix);
APInt zero(tmp.getBitWidth(), 0);
size_t insert_at = 0;
if (wantSigned && tmp[BitWidth-1]) {
// They want to print the signed version and it is a negative value
// Flip the bits and add one to turn it into the equivalent positive
// value and put a '-' in the result.
tmp.flip();
tmp++;
result = "-";
insert_at = 1;
}
if (tmp == APInt(tmp.getBitWidth(), 0))
result = "0";
else while (tmp.ne(zero)) {
APInt APdigit(1,0);
APInt tmp2(tmp.getBitWidth(), 0);
divide(tmp, tmp.getNumWords(), divisor, divisor.getNumWords(), &tmp2,
&APdigit);
uint32_t digit = (uint32_t)APdigit.getZExtValue();
assert(digit < radix && "divide failed");
result.insert(insert_at,digits[digit]);
tmp = tmp2;
}
return result;
}
void APInt::dump() const
{
cerr << "APInt(" << BitWidth << ")=" << std::setbase(16);
if (isSingleWord())
cerr << VAL;
else for (unsigned i = getNumWords(); i > 0; i--) {
cerr << pVal[i-1] << " ";
}
cerr << " U(" << this->toStringUnsigned(10) << ") S("
<< this->toStringSigned(10) << ")" << std::setbase(10);
}
// This implements a variety of operations on a representation of
// arbitrary precision, two's-complement, bignum integer values.
/* Assumed by lowHalf, highHalf, partMSB and partLSB. A fairly safe
and unrestricting assumption. */
COMPILE_TIME_ASSERT(integerPartWidth % 2 == 0);
/* Some handy functions local to this file. */
namespace {
/* Returns the integer part with the least significant BITS set.
BITS cannot be zero. */
static inline integerPart
lowBitMask(unsigned int bits)
{
assert (bits != 0 && bits <= integerPartWidth);
return ~(integerPart) 0 >> (integerPartWidth - bits);
}
/* Returns the value of the lower half of PART. */
static inline integerPart
lowHalf(integerPart part)
{
return part & lowBitMask(integerPartWidth / 2);
}
/* Returns the value of the upper half of PART. */
static inline integerPart
highHalf(integerPart part)
{
return part >> (integerPartWidth / 2);
}
/* Returns the bit number of the most significant set bit of a part.
If the input number has no bits set -1U is returned. */
static unsigned int
partMSB(integerPart value)
{
unsigned int n, msb;
if (value == 0)
return -1U;
n = integerPartWidth / 2;
msb = 0;
do {
if (value >> n) {
value >>= n;
msb += n;
}
n >>= 1;
} while (n);
return msb;
}
/* Returns the bit number of the least significant set bit of a
part. If the input number has no bits set -1U is returned. */
static unsigned int
partLSB(integerPart value)
{
unsigned int n, lsb;
if (value == 0)
return -1U;
lsb = integerPartWidth - 1;
n = integerPartWidth / 2;
do {
if (value << n) {
value <<= n;
lsb -= n;
}
n >>= 1;
} while (n);
return lsb;
}
}
/* Sets the least significant part of a bignum to the input value, and
zeroes out higher parts. */
void
APInt::tcSet(integerPart *dst, integerPart part, unsigned int parts)
{
unsigned int i;
assert (parts > 0);
dst[0] = part;
for(i = 1; i < parts; i++)
dst[i] = 0;
}
/* Assign one bignum to another. */
void
APInt::tcAssign(integerPart *dst, const integerPart *src, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
dst[i] = src[i];
}
/* Returns true if a bignum is zero, false otherwise. */
bool
APInt::tcIsZero(const integerPart *src, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
if (src[i])
return false;
return true;
}
/* Extract the given bit of a bignum; returns 0 or 1. */
int
APInt::tcExtractBit(const integerPart *parts, unsigned int bit)
{
return(parts[bit / integerPartWidth]
& ((integerPart) 1 << bit % integerPartWidth)) != 0;
}
/* Set the given bit of a bignum. */
void
APInt::tcSetBit(integerPart *parts, unsigned int bit)
{
parts[bit / integerPartWidth] |= (integerPart) 1 << (bit % integerPartWidth);
}
/* Returns the bit number of the least significant set bit of a
number. If the input number has no bits set -1U is returned. */
unsigned int
APInt::tcLSB(const integerPart *parts, unsigned int n)
{
unsigned int i, lsb;
for(i = 0; i < n; i++) {
if (parts[i] != 0) {
lsb = partLSB(parts[i]);
return lsb + i * integerPartWidth;
}
}
return -1U;
}
/* Returns the bit number of the most significant set bit of a number.
If the input number has no bits set -1U is returned. */
unsigned int
APInt::tcMSB(const integerPart *parts, unsigned int n)
{
unsigned int msb;
do {
--n;
if (parts[n] != 0) {
msb = partMSB(parts[n]);
return msb + n * integerPartWidth;
}
} while (n);
return -1U;
}
/* Copy the bit vector of width srcBITS from SRC, starting at bit
srcLSB, to DST, of dstCOUNT parts, such that the bit srcLSB becomes
the least significant bit of DST. All high bits above srcBITS in
DST are zero-filled. */
void
APInt::tcExtract(integerPart *dst, unsigned int dstCount, const integerPart *src,
unsigned int srcBits, unsigned int srcLSB)
{
unsigned int firstSrcPart, dstParts, shift, n;
dstParts = (srcBits + integerPartWidth - 1) / integerPartWidth;
assert (dstParts <= dstCount);
firstSrcPart = srcLSB / integerPartWidth;
tcAssign (dst, src + firstSrcPart, dstParts);
shift = srcLSB % integerPartWidth;
tcShiftRight (dst, dstParts, shift);
/* We now have (dstParts * integerPartWidth - shift) bits from SRC
in DST. If this is less that srcBits, append the rest, else
clear the high bits. */
n = dstParts * integerPartWidth - shift;
if (n < srcBits) {
integerPart mask = lowBitMask (srcBits - n);
dst[dstParts - 1] |= ((src[firstSrcPart + dstParts] & mask)
<< n % integerPartWidth);
} else if (n > srcBits) {
if (srcBits % integerPartWidth)
dst[dstParts - 1] &= lowBitMask (srcBits % integerPartWidth);
}
/* Clear high parts. */
while (dstParts < dstCount)
dst[dstParts++] = 0;
}
/* DST += RHS + C where C is zero or one. Returns the carry flag. */
integerPart
APInt::tcAdd(integerPart *dst, const integerPart *rhs,
integerPart c, unsigned int parts)
{
unsigned int i;
assert(c <= 1);
for(i = 0; i < parts; i++) {
integerPart l;
l = dst[i];
if (c) {
dst[i] += rhs[i] + 1;
c = (dst[i] <= l);
} else {
dst[i] += rhs[i];
c = (dst[i] < l);
}
}
return c;
}
/* DST -= RHS + C where C is zero or one. Returns the carry flag. */
integerPart
APInt::tcSubtract(integerPart *dst, const integerPart *rhs,
integerPart c, unsigned int parts)
{
unsigned int i;
assert(c <= 1);
for(i = 0; i < parts; i++) {
integerPart l;
l = dst[i];
if (c) {
dst[i] -= rhs[i] + 1;
c = (dst[i] >= l);
} else {
dst[i] -= rhs[i];
c = (dst[i] > l);
}
}
return c;
}
/* Negate a bignum in-place. */
void
APInt::tcNegate(integerPart *dst, unsigned int parts)
{
tcComplement(dst, parts);
tcIncrement(dst, parts);
}
/* DST += SRC * MULTIPLIER + CARRY if add is true
DST = SRC * MULTIPLIER + CARRY if add is false
Requires 0 <= DSTPARTS <= SRCPARTS + 1. If DST overlaps SRC
they must start at the same point, i.e. DST == SRC.
If DSTPARTS == SRCPARTS + 1 no overflow occurs and zero is
returned. Otherwise DST is filled with the least significant
DSTPARTS parts of the result, and if all of the omitted higher
parts were zero return zero, otherwise overflow occurred and
return one. */
int
APInt::tcMultiplyPart(integerPart *dst, const integerPart *src,
integerPart multiplier, integerPart carry,
unsigned int srcParts, unsigned int dstParts,
bool add)
{
unsigned int i, n;
/* Otherwise our writes of DST kill our later reads of SRC. */
assert(dst <= src || dst >= src + srcParts);
assert(dstParts <= srcParts + 1);
/* N loops; minimum of dstParts and srcParts. */
n = dstParts < srcParts ? dstParts: srcParts;
for(i = 0; i < n; i++) {
integerPart low, mid, high, srcPart;
/* [ LOW, HIGH ] = MULTIPLIER * SRC[i] + DST[i] + CARRY.
This cannot overflow, because
(n - 1) * (n - 1) + 2 (n - 1) = (n - 1) * (n + 1)
which is less than n^2. */
srcPart = src[i];
if (multiplier == 0 || srcPart == 0) {
low = carry;
high = 0;
} else {
low = lowHalf(srcPart) * lowHalf(multiplier);
high = highHalf(srcPart) * highHalf(multiplier);
mid = lowHalf(srcPart) * highHalf(multiplier);
high += highHalf(mid);
mid <<= integerPartWidth / 2;
if (low + mid < low)
high++;
low += mid;
mid = highHalf(srcPart) * lowHalf(multiplier);
high += highHalf(mid);
mid <<= integerPartWidth / 2;
if (low + mid < low)
high++;
low += mid;
/* Now add carry. */
if (low + carry < low)
high++;
low += carry;
}
if (add) {
/* And now DST[i], and store the new low part there. */
if (low + dst[i] < low)
high++;
dst[i] += low;
} else
dst[i] = low;
carry = high;
}
if (i < dstParts) {
/* Full multiplication, there is no overflow. */
assert(i + 1 == dstParts);
dst[i] = carry;
return 0;
} else {
/* We overflowed if there is carry. */
if (carry)
return 1;
/* We would overflow if any significant unwritten parts would be
non-zero. This is true if any remaining src parts are non-zero
and the multiplier is non-zero. */
if (multiplier)
for(; i < srcParts; i++)
if (src[i])
return 1;
/* We fitted in the narrow destination. */
return 0;
}
}
/* DST = LHS * RHS, where DST has the same width as the operands and
is filled with the least significant parts of the result. Returns
one if overflow occurred, otherwise zero. DST must be disjoint
from both operands. */
int
APInt::tcMultiply(integerPart *dst, const integerPart *lhs,
const integerPart *rhs, unsigned int parts)
{
unsigned int i;
int overflow;
assert(dst != lhs && dst != rhs);
overflow = 0;
tcSet(dst, 0, parts);
for(i = 0; i < parts; i++)
overflow |= tcMultiplyPart(&dst[i], lhs, rhs[i], 0, parts,
parts - i, true);
return overflow;
}
/* DST = LHS * RHS, where DST has width the sum of the widths of the
operands. No overflow occurs. DST must be disjoint from both
operands. Returns the number of parts required to hold the
result. */
unsigned int
APInt::tcFullMultiply(integerPart *dst, const integerPart *lhs,
const integerPart *rhs, unsigned int lhsParts,
unsigned int rhsParts)
{
/* Put the narrower number on the LHS for less loops below. */
if (lhsParts > rhsParts) {
return tcFullMultiply (dst, rhs, lhs, rhsParts, lhsParts);
} else {
unsigned int n;
assert(dst != lhs && dst != rhs);
tcSet(dst, 0, rhsParts);
for(n = 0; n < lhsParts; n++)
tcMultiplyPart(&dst[n], rhs, lhs[n], 0, rhsParts, rhsParts + 1, true);
n = lhsParts + rhsParts;
return n - (dst[n - 1] == 0);
}
}
/* If RHS is zero LHS and REMAINDER are left unchanged, return one.
Otherwise set LHS to LHS / RHS with the fractional part discarded,
set REMAINDER to the remainder, return zero. i.e.
OLD_LHS = RHS * LHS + REMAINDER
SCRATCH is a bignum of the same size as the operands and result for
use by the routine; its contents need not be initialized and are
destroyed. LHS, REMAINDER and SCRATCH must be distinct.
*/
int
APInt::tcDivide(integerPart *lhs, const integerPart *rhs,
integerPart *remainder, integerPart *srhs,
unsigned int parts)
{
unsigned int n, shiftCount;
integerPart mask;
assert(lhs != remainder && lhs != srhs && remainder != srhs);
shiftCount = tcMSB(rhs, parts) + 1;
if (shiftCount == 0)
return true;
shiftCount = parts * integerPartWidth - shiftCount;
n = shiftCount / integerPartWidth;
mask = (integerPart) 1 << (shiftCount % integerPartWidth);
tcAssign(srhs, rhs, parts);
tcShiftLeft(srhs, parts, shiftCount);
tcAssign(remainder, lhs, parts);
tcSet(lhs, 0, parts);
/* Loop, subtracting SRHS if REMAINDER is greater and adding that to
the total. */
for(;;) {
int compare;
compare = tcCompare(remainder, srhs, parts);
if (compare >= 0) {
tcSubtract(remainder, srhs, 0, parts);
lhs[n] |= mask;
}
if (shiftCount == 0)
break;
shiftCount--;
tcShiftRight(srhs, parts, 1);
if ((mask >>= 1) == 0)
mask = (integerPart) 1 << (integerPartWidth - 1), n--;
}
return false;
}
/* Shift a bignum left COUNT bits in-place. Shifted in bits are zero.
There are no restrictions on COUNT. */
void
APInt::tcShiftLeft(integerPart *dst, unsigned int parts, unsigned int count)
{
if (count) {
unsigned int jump, shift;
/* Jump is the inter-part jump; shift is is intra-part shift. */
jump = count / integerPartWidth;
shift = count % integerPartWidth;
while (parts > jump) {
integerPart part;
parts--;
/* dst[i] comes from the two parts src[i - jump] and, if we have
an intra-part shift, src[i - jump - 1]. */
part = dst[parts - jump];
if (shift) {
part <<= shift;
if (parts >= jump + 1)
part |= dst[parts - jump - 1] >> (integerPartWidth - shift);
}
dst[parts] = part;
}
while (parts > 0)
dst[--parts] = 0;
}
}
/* Shift a bignum right COUNT bits in-place. Shifted in bits are
zero. There are no restrictions on COUNT. */
void
APInt::tcShiftRight(integerPart *dst, unsigned int parts, unsigned int count)
{
if (count) {
unsigned int i, jump, shift;
/* Jump is the inter-part jump; shift is is intra-part shift. */
jump = count / integerPartWidth;
shift = count % integerPartWidth;
/* Perform the shift. This leaves the most significant COUNT bits
of the result at zero. */
for(i = 0; i < parts; i++) {
integerPart part;
if (i + jump >= parts) {
part = 0;
} else {
part = dst[i + jump];
if (shift) {
part >>= shift;
if (i + jump + 1 < parts)
part |= dst[i + jump + 1] << (integerPartWidth - shift);
}
}
dst[i] = part;
}
}
}
/* Bitwise and of two bignums. */
void
APInt::tcAnd(integerPart *dst, const integerPart *rhs, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
dst[i] &= rhs[i];
}
/* Bitwise inclusive or of two bignums. */
void
APInt::tcOr(integerPart *dst, const integerPart *rhs, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
dst[i] |= rhs[i];
}
/* Bitwise exclusive or of two bignums. */
void
APInt::tcXor(integerPart *dst, const integerPart *rhs, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
dst[i] ^= rhs[i];
}
/* Complement a bignum in-place. */
void
APInt::tcComplement(integerPart *dst, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
dst[i] = ~dst[i];
}
/* Comparison (unsigned) of two bignums. */
int
APInt::tcCompare(const integerPart *lhs, const integerPart *rhs,
unsigned int parts)
{
while (parts) {
parts--;
if (lhs[parts] == rhs[parts])
continue;
if (lhs[parts] > rhs[parts])
return 1;
else
return -1;
}
return 0;
}
/* Increment a bignum in-place, return the carry flag. */
integerPart
APInt::tcIncrement(integerPart *dst, unsigned int parts)
{
unsigned int i;
for(i = 0; i < parts; i++)
if (++dst[i] != 0)
break;
return i == parts;
}
/* Set the least significant BITS bits of a bignum, clear the
rest. */
void
APInt::tcSetLeastSignificantBits(integerPart *dst, unsigned int parts,
unsigned int bits)
{
unsigned int i;
i = 0;
while (bits > integerPartWidth) {
dst[i++] = ~(integerPart) 0;
bits -= integerPartWidth;
}
if (bits)
dst[i++] = ~(integerPart) 0 >> (integerPartWidth - bits);
while (i < parts)
dst[i++] = 0;
}