6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-15 04:30:12 +00:00
Code Issues Projects Releases Wiki Activity
1fa3b4b235
llvm-6502/lib/Transforms/Scalar/LoopStrengthReduce.cpp
Dale Johannesen 2f46bb8178 Fix the time regression I introduced in 464.h264ref with 
my earlier patch to this file.

The issue there was that all uses of an IV inside a loop
are actually references to Base[IV*2], and there was one
use outside that was the same but LSR didn't see the base
or the scaling because it didn't recurse into uses outside
the loop; thus, it used base+IV*scale mode inside the loop
instead of pulling base out of the loop.  This was extra bad
because register pressure later forced both base and IV into
memory.  Doing that recursion, at least enough
to figure out addressing modes, is a good idea in general;
the change in AddUsersIfInteresting does this.  However,
there were side effects....

It is also possible for recursing outside the loop to
introduce another IV where there was only 1 before (if
the refs inside are not scaled and the ref outside is).
I don't think this is a common case, but it's in the testsuite.
It is right to be very aggressive about getting rid of
such introduced IVs (CheckForIVReuse and the handling of
nonzero RewriteFactor in StrengthReduceStridedIVUsers).
In the testcase in question the new IV produced this way
has both a nonconstant stride and a nonzero base, neither
of which was handled before.  And when inserting 
new code that feeds into a PHI, it's right to put such 
code at the original location rather than in the PHI's 
immediate predecessor(s) when the original location is outside 
the loop (a case that couldn't happen before)
(RewriteInstructionToUseNewBase); better to avoid making
multiple copies of it in this case.

Also, the mechanism for keeping SCEV's corresponding to GEP's
no longer works, as the GEP might change after its SCEV
is remembered, invalidating the SCEV, and we might get a bad
SCEV value when looking up the GEP again for a later loop.  
This also couldn't happen before, as we weren't recursing
into GEP's outside the loop.

Also, when we build an expression that involves a (possibly
non-affine) IV from a different loop as well as an IV from
the one we're interested in (containsAddRecFromDifferentLoop),
don't recurse into that.  We can't do much with it and will
get in trouble if we try to create new non-affine IVs or something.

More testcases are coming.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@62212 91177308-0d34-0410-b5e6-96231b3b80d8
2009-01-14 02:35:31 +00:00

2363 lines
96 KiB
C++
Raw Blame History

//===- LoopStrengthReduce.cpp - Strength Reduce GEPs in Loops -------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This pass performs a strength reduction on array references inside loops that
// have as one or more of their components the loop induction variable. This is
// accomplished by creating a new Value to hold the initial value of the array
// access for the first iteration, and then creating a new GEP instruction in
// the loop to increment the value by the appropriate amount.
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "loop-reduce"
#include "llvm/Transforms/Scalar.h"
#include "llvm/Constants.h"
#include "llvm/Instructions.h"
#include "llvm/IntrinsicInst.h"
#include "llvm/Type.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Analysis/Dominators.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopPass.h"
#include "llvm/Analysis/ScalarEvolutionExpander.h"
#include "llvm/Support/CFG.h"
#include "llvm/Support/GetElementPtrTypeIterator.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/Local.h"
#include "llvm/Target/TargetData.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Target/TargetLowering.h"
#include <algorithm>
#include <set>
using namespace llvm;
STATISTIC(NumReduced , "Number of GEPs strength reduced");
STATISTIC(NumInserted, "Number of PHIs inserted");
STATISTIC(NumVariable, "Number of PHIs with variable strides");
STATISTIC(NumEliminated, "Number of strides eliminated");
STATISTIC(NumShadow, "Number of Shadow IVs optimized");
namespace {
struct BasedUser;
/// IVStrideUse - Keep track of one use of a strided induction variable, where
/// the stride is stored externally. The Offset member keeps track of the
/// offset from the IV, User is the actual user of the operand, and
/// 'OperandValToReplace' is the operand of the User that is the use.
struct VISIBILITY_HIDDEN IVStrideUse {
SCEVHandle Offset;
Instruction *User;
Value *OperandValToReplace;
// isUseOfPostIncrementedValue - True if this should use the
// post-incremented version of this IV, not the preincremented version.
// This can only be set in special cases, such as the terminating setcc
// instruction for a loop or uses dominated by the loop.
bool isUseOfPostIncrementedValue;
IVStrideUse(const SCEVHandle &Offs, Instruction *U, Value *O)
: Offset(Offs), User(U), OperandValToReplace(O),
isUseOfPostIncrementedValue(false) {}
};
/// IVUsersOfOneStride - This structure keeps track of all instructions that
/// have an operand that is based on the trip count multiplied by some stride.
/// The stride for all of these users is common and kept external to this
/// structure.
struct VISIBILITY_HIDDEN IVUsersOfOneStride {
/// Users - Keep track of all of the users of this stride as well as the
/// initial value and the operand that uses the IV.
std::vector<IVStrideUse> Users;
void addUser(const SCEVHandle &Offset,Instruction *User, Value *Operand) {
Users.push_back(IVStrideUse(Offset, User, Operand));
}
};
/// IVInfo - This structure keeps track of one IV expression inserted during
/// StrengthReduceStridedIVUsers. It contains the stride, the common base, as
/// well as the PHI node and increment value created for rewrite.
struct VISIBILITY_HIDDEN IVExpr {
SCEVHandle Stride;
SCEVHandle Base;
PHINode *PHI;
Value *IncV;
IVExpr(const SCEVHandle &stride, const SCEVHandle &base, PHINode *phi,
Value *incv)
: Stride(stride), Base(base), PHI(phi), IncV(incv) {}
};
/// IVsOfOneStride - This structure keeps track of all IV expression inserted
/// during StrengthReduceStridedIVUsers for a particular stride of the IV.
struct VISIBILITY_HIDDEN IVsOfOneStride {
std::vector<IVExpr> IVs;
void addIV(const SCEVHandle &Stride, const SCEVHandle &Base, PHINode *PHI,
Value *IncV) {
IVs.push_back(IVExpr(Stride, Base, PHI, IncV));
}
};
class VISIBILITY_HIDDEN LoopStrengthReduce : public LoopPass {
LoopInfo *LI;
DominatorTree *DT;
ScalarEvolution *SE;
const TargetData *TD;
const Type *UIntPtrTy;
bool Changed;
/// IVUsesByStride - Keep track of all uses of induction variables that we
/// are interested in. The key of the map is the stride of the access.
std::map<SCEVHandle, IVUsersOfOneStride> IVUsesByStride;
/// IVsByStride - Keep track of all IVs that have been inserted for a
/// particular stride.
std::map<SCEVHandle, IVsOfOneStride> IVsByStride;
/// StrideOrder - An ordering of the keys in IVUsesByStride that is stable:
/// We use this to iterate over the IVUsesByStride collection without being
/// dependent on random ordering of pointers in the process.
SmallVector<SCEVHandle, 16> StrideOrder;
/// GEPlist - A list of the GEP's that have been remembered in the SCEV
/// data structures. SCEV does not know to update these when the operands
/// of the GEP are changed, which means we cannot leave them live across
/// loops.
SmallVector<GetElementPtrInst *, 16> GEPlist;
/// CastedValues - As we need to cast values to uintptr_t, this keeps track
/// of the casted version of each value. This is accessed by
/// getCastedVersionOf.
DenseMap<Value*, Value*> CastedPointers;
/// DeadInsts - Keep track of instructions we may have made dead, so that
/// we can remove them after we are done working.
SmallVector<Instruction*, 16> DeadInsts;
/// TLI - Keep a pointer of a TargetLowering to consult for determining
/// transformation profitability.
const TargetLowering *TLI;
public:
static char ID; // Pass ID, replacement for typeid
explicit LoopStrengthReduce(const TargetLowering *tli = NULL) :
LoopPass(&ID), TLI(tli) {
}
bool runOnLoop(Loop *L, LPPassManager &LPM);
virtual void getAnalysisUsage(AnalysisUsage &AU) const {
// We split critical edges, so we change the CFG. However, we do update
// many analyses if they are around.
AU.addPreservedID(LoopSimplifyID);
AU.addPreserved<LoopInfo>();
AU.addPreserved<DominanceFrontier>();
AU.addPreserved<DominatorTree>();
AU.addRequiredID(LoopSimplifyID);
AU.addRequired<LoopInfo>();
AU.addRequired<DominatorTree>();
AU.addRequired<TargetData>();
AU.addRequired<ScalarEvolution>();
AU.addPreserved<ScalarEvolution>();
}
/// getCastedVersionOf - Return the specified value casted to uintptr_t.
///
Value *getCastedVersionOf(Instruction::CastOps opcode, Value *V);
private:
bool AddUsersIfInteresting(Instruction *I, Loop *L,
SmallPtrSet<Instruction*,16> &Processed);
SCEVHandle GetExpressionSCEV(Instruction *E);
ICmpInst *ChangeCompareStride(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse,
const SCEVHandle* &CondStride);
void OptimizeIndvars(Loop *L);
/// OptimizeShadowIV - If IV is used in a int-to-float cast
/// inside the loop then try to eliminate the cast opeation.
void OptimizeShadowIV(Loop *L);
/// OptimizeSMax - Rewrite the loop's terminating condition
/// if it uses an smax computation.
ICmpInst *OptimizeSMax(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse);
bool FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse,
const SCEVHandle *&CondStride);
bool RequiresTypeConversion(const Type *Ty, const Type *NewTy);
SCEVHandle CheckForIVReuse(bool, bool, bool, const SCEVHandle&,
IVExpr&, const Type*,
const std::vector<BasedUser>& UsersToProcess);
bool ValidStride(bool, int64_t,
const std::vector<BasedUser>& UsersToProcess);
SCEVHandle CollectIVUsers(const SCEVHandle &Stride,
IVUsersOfOneStride &Uses,
Loop *L,
bool &AllUsesAreAddresses,
bool &AllUsesAreOutsideLoop,
std::vector<BasedUser> &UsersToProcess);
void StrengthReduceStridedIVUsers(const SCEVHandle &Stride,
IVUsersOfOneStride &Uses,
Loop *L, bool isOnlyStride);
void DeleteTriviallyDeadInstructions();
};
}
char LoopStrengthReduce::ID = 0;
static RegisterPass<LoopStrengthReduce>
X("loop-reduce", "Loop Strength Reduction");
Pass *llvm::createLoopStrengthReducePass(const TargetLowering *TLI) {
return new LoopStrengthReduce(TLI);
}
/// getCastedVersionOf - Return the specified value casted to uintptr_t. This
/// assumes that the Value* V is of integer or pointer type only.
///
Value *LoopStrengthReduce::getCastedVersionOf(Instruction::CastOps opcode,
Value *V) {
if (V->getType() == UIntPtrTy) return V;
if (Constant *CB = dyn_cast<Constant>(V))
return ConstantExpr::getCast(opcode, CB, UIntPtrTy);
Value *&New = CastedPointers[V];
if (New) return New;
New = SCEVExpander::InsertCastOfTo(opcode, V, UIntPtrTy);
DeadInsts.push_back(cast<Instruction>(New));
return New;
}
/// DeleteTriviallyDeadInstructions - If any of the instructions is the
/// specified set are trivially dead, delete them and see if this makes any of
/// their operands subsequently dead.
void LoopStrengthReduce::DeleteTriviallyDeadInstructions() {
if (DeadInsts.empty()) return;
// Sort the deadinsts list so that we can trivially eliminate duplicates as we
// go. The code below never adds a non-dead instruction to the worklist, but
// callers may not be so careful.
array_pod_sort(DeadInsts.begin(), DeadInsts.end());
// Drop duplicate instructions and those with uses.
for (unsigned i = 0, e = DeadInsts.size()-1; i < e; ++i) {
Instruction *I = DeadInsts[i];
if (!I->use_empty()) DeadInsts[i] = 0;
while (i != e && DeadInsts[i+1] == I)
DeadInsts[++i] = 0;
}
while (!DeadInsts.empty()) {
Instruction *I = DeadInsts.back();
DeadInsts.pop_back();
if (I == 0 || !isInstructionTriviallyDead(I))
continue;
SE->deleteValueFromRecords(I);
for (User::op_iterator OI = I->op_begin(), E = I->op_end(); OI != E; ++OI) {
if (Instruction *U = dyn_cast<Instruction>(*OI)) {
*OI = 0;
if (U->use_empty())
DeadInsts.push_back(U);
}
}
I->eraseFromParent();
Changed = true;
}
}
/// GetExpressionSCEV - Compute and return the SCEV for the specified
/// instruction.
SCEVHandle LoopStrengthReduce::GetExpressionSCEV(Instruction *Exp) {
// Pointer to pointer bitcast instructions return the same value as their
// operand.
if (BitCastInst *BCI = dyn_cast<BitCastInst>(Exp)) {
if (SE->hasSCEV(BCI) || !isa<Instruction>(BCI->getOperand(0)))
return SE->getSCEV(BCI);
SCEVHandle R = GetExpressionSCEV(cast<Instruction>(BCI->getOperand(0)));
SE->setSCEV(BCI, R);
return R;
}
// Scalar Evolutions doesn't know how to compute SCEV's for GEP instructions.
// If this is a GEP that SE doesn't know about, compute it now and insert it.
// If this is not a GEP, or if we have already done this computation, just let
// SE figure it out.
GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Exp);
if (!GEP || SE->hasSCEV(GEP))
return SE->getSCEV(Exp);
// Analyze all of the subscripts of this getelementptr instruction, looking
// for uses that are determined by the trip count of the loop. First, skip
// all operands the are not dependent on the IV.
// Build up the base expression. Insert an LLVM cast of the pointer to
// uintptr_t first.
SCEVHandle GEPVal = SE->getUnknown(
getCastedVersionOf(Instruction::PtrToInt, GEP->getOperand(0)));
gep_type_iterator GTI = gep_type_begin(GEP);
for (User::op_iterator i = GEP->op_begin() + 1, e = GEP->op_end();
i != e; ++i, ++GTI) {
// If this is a use of a recurrence that we can analyze, and it comes before
// Op does in the GEP operand list, we will handle this when we process this
// operand.
if (const StructType *STy = dyn_cast<StructType>(*GTI)) {
const StructLayout *SL = TD->getStructLayout(STy);
unsigned Idx = cast<ConstantInt>(*i)->getZExtValue();
uint64_t Offset = SL->getElementOffset(Idx);
GEPVal = SE->getAddExpr(GEPVal,
SE->getIntegerSCEV(Offset, UIntPtrTy));
} else {
unsigned GEPOpiBits =
(*i)->getType()->getPrimitiveSizeInBits();
unsigned IntPtrBits = UIntPtrTy->getPrimitiveSizeInBits();
Instruction::CastOps opcode = (GEPOpiBits < IntPtrBits ?
Instruction::SExt : (GEPOpiBits > IntPtrBits ? Instruction::Trunc :
Instruction::BitCast));
Value *OpVal = getCastedVersionOf(opcode, *i);
SCEVHandle Idx = SE->getSCEV(OpVal);
uint64_t TypeSize = TD->getTypePaddedSize(GTI.getIndexedType());
if (TypeSize != 1)
Idx = SE->getMulExpr(Idx,
SE->getConstant(ConstantInt::get(UIntPtrTy,
TypeSize)));
GEPVal = SE->getAddExpr(GEPVal, Idx);
}
}
SE->setSCEV(GEP, GEPVal);
GEPlist.push_back(GEP);
return GEPVal;
}
/// containsAddRecFromDifferentLoop - Determine whether expression S involves a
/// subexpression that is an AddRec from a loop other than L. An outer loop
/// of L is OK, but not an inner loop nor a disjoint loop.
static bool containsAddRecFromDifferentLoop(SCEVHandle S, Loop *L) {
// This is very common, put it first.
if (isa<SCEVConstant>(S))
return false;
if (SCEVCommutativeExpr *AE = dyn_cast<SCEVCommutativeExpr>(S)) {
for (unsigned int i=0; i< AE->getNumOperands(); i++)
if (containsAddRecFromDifferentLoop(AE->getOperand(i), L))
return true;
return false;
}
if (SCEVAddRecExpr *AE = dyn_cast<SCEVAddRecExpr>(S)) {
if (const Loop *newLoop = AE->getLoop()) {
if (newLoop == L)
return false;
// if newLoop is an outer loop of L, this is OK.
if (!LoopInfoBase<BasicBlock>::isNotAlreadyContainedIn(L, newLoop))
return false;
}
return true;
}
if (SCEVUDivExpr *DE = dyn_cast<SCEVUDivExpr>(S))
return containsAddRecFromDifferentLoop(DE->getLHS(), L) ||
containsAddRecFromDifferentLoop(DE->getRHS(), L);
#if 0
// SCEVSDivExpr has been backed out temporarily, but will be back; we'll
// need this when it is.
if (SCEVSDivExpr *DE = dyn_cast<SCEVSDivExpr>(S))
return containsAddRecFromDifferentLoop(DE->getLHS(), L) ||
containsAddRecFromDifferentLoop(DE->getRHS(), L);
#endif
if (SCEVTruncateExpr *TE = dyn_cast<SCEVTruncateExpr>(S))
return containsAddRecFromDifferentLoop(TE->getOperand(), L);
if (SCEVZeroExtendExpr *ZE = dyn_cast<SCEVZeroExtendExpr>(S))
return containsAddRecFromDifferentLoop(ZE->getOperand(), L);
if (SCEVSignExtendExpr *SE = dyn_cast<SCEVSignExtendExpr>(S))
return containsAddRecFromDifferentLoop(SE->getOperand(), L);
return false;
}
/// getSCEVStartAndStride - Compute the start and stride of this expression,
/// returning false if the expression is not a start/stride pair, or true if it
/// is. The stride must be a loop invariant expression, but the start may be
/// a mix of loop invariant and loop variant expressions. The start cannot,
/// however, contain an AddRec from a different loop, unless that loop is an
/// outer loop of the current loop.
static bool getSCEVStartAndStride(const SCEVHandle &SH, Loop *L,
SCEVHandle &Start, SCEVHandle &Stride,
ScalarEvolution *SE) {
SCEVHandle TheAddRec = Start; // Initialize to zero.
// If the outer level is an AddExpr, the operands are all start values except
// for a nested AddRecExpr.
if (SCEVAddExpr *AE = dyn_cast<SCEVAddExpr>(SH)) {
for (unsigned i = 0, e = AE->getNumOperands(); i != e; ++i)
if (SCEVAddRecExpr *AddRec =
dyn_cast<SCEVAddRecExpr>(AE->getOperand(i))) {
if (AddRec->getLoop() == L)
TheAddRec = SE->getAddExpr(AddRec, TheAddRec);
else
return false; // Nested IV of some sort?
} else {
Start = SE->getAddExpr(Start, AE->getOperand(i));
}
} else if (isa<SCEVAddRecExpr>(SH)) {
TheAddRec = SH;
} else {
return false; // not analyzable.
}
SCEVAddRecExpr *AddRec = dyn_cast<SCEVAddRecExpr>(TheAddRec);
if (!AddRec || AddRec->getLoop() != L) return false;
// FIXME: Generalize to non-affine IV's.
if (!AddRec->isAffine()) return false;
// If Start contains an SCEVAddRecExpr from a different loop, other than an
// outer loop of the current loop, reject it. SCEV has no concept of operating
// on one loop at a time so don't confuse it with such expressions.
if (containsAddRecFromDifferentLoop(Start, L))
return false;
Start = SE->getAddExpr(Start, AddRec->getOperand(0));
if (!isa<SCEVConstant>(AddRec->getOperand(1)))
DOUT << "[" << L->getHeader()->getName()
<< "] Variable stride: " << *AddRec << "\n";
Stride = AddRec->getOperand(1);
return true;
}
/// IVUseShouldUsePostIncValue - We have discovered a "User" of an IV expression
/// and now we need to decide whether the user should use the preinc or post-inc
/// value. If this user should use the post-inc version of the IV, return true.
///
/// Choosing wrong here can break dominance properties (if we choose to use the
/// post-inc value when we cannot) or it can end up adding extra live-ranges to
/// the loop, resulting in reg-reg copies (if we use the pre-inc value when we
/// should use the post-inc value).
static bool IVUseShouldUsePostIncValue(Instruction *User, Instruction *IV,
Loop *L, DominatorTree *DT, Pass *P,
SmallVectorImpl<Instruction*> &DeadInsts){
// If the user is in the loop, use the preinc value.
if (L->contains(User->getParent())) return false;
BasicBlock *LatchBlock = L->getLoopLatch();
// Ok, the user is outside of the loop. If it is dominated by the latch
// block, use the post-inc value.
if (DT->dominates(LatchBlock, User->getParent()))
return true;
// There is one case we have to be careful of: PHI nodes. These little guys
// can live in blocks that do not dominate the latch block, but (since their
// uses occur in the predecessor block, not the block the PHI lives in) should
// still use the post-inc value. Check for this case now.
PHINode *PN = dyn_cast<PHINode>(User);
if (!PN) return false; // not a phi, not dominated by latch block.
// Look at all of the uses of IV by the PHI node. If any use corresponds to
// a block that is not dominated by the latch block, give up and use the
// preincremented value.
unsigned NumUses = 0;
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == IV) {
++NumUses;
if (!DT->dominates(LatchBlock, PN->getIncomingBlock(i)))
return false;
}
// Okay, all uses of IV by PN are in predecessor blocks that really are
// dominated by the latch block. Split the critical edges and use the
// post-incremented value.
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == IV) {
SplitCriticalEdge(PN->getIncomingBlock(i), PN->getParent(), P, false);
// Splitting the critical edge can reduce the number of entries in this
// PHI.
e = PN->getNumIncomingValues();
if (--NumUses == 0) break;
}
// PHI node might have become a constant value after SplitCriticalEdge.
DeadInsts.push_back(User);
return true;
}
/// isAddress - Returns true if the specified instruction is using the
/// specified value as an address.
static bool isAddressUse(Instruction *Inst, Value *OperandVal) {
bool isAddress = isa<LoadInst>(Inst);
if (StoreInst *SI = dyn_cast<StoreInst>(Inst)) {
if (SI->getOperand(1) == OperandVal)
isAddress = true;
} else if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(Inst)) {
// Addressing modes can also be folded into prefetches and a variety
// of intrinsics.
switch (II->getIntrinsicID()) {
default: break;
case Intrinsic::prefetch:
case Intrinsic::x86_sse2_loadu_dq:
case Intrinsic::x86_sse2_loadu_pd:
case Intrinsic::x86_sse_loadu_ps:
case Intrinsic::x86_sse_storeu_ps:
case Intrinsic::x86_sse2_storeu_pd:
case Intrinsic::x86_sse2_storeu_dq:
case Intrinsic::x86_sse2_storel_dq:
if (II->getOperand(1) == OperandVal)
isAddress = true;
break;
}
}
return isAddress;
}
/// AddUsersIfInteresting - Inspect the specified instruction. If it is a
/// reducible SCEV, recursively add its users to the IVUsesByStride set and
/// return true. Otherwise, return false.
bool LoopStrengthReduce::AddUsersIfInteresting(Instruction *I, Loop *L,
SmallPtrSet<Instruction*,16> &Processed) {
if (!I->getType()->isInteger() && !isa<PointerType>(I->getType()))
return false; // Void and FP expressions cannot be reduced.
if (!Processed.insert(I))
return true; // Instruction already handled.
// Get the symbolic expression for this instruction.
SCEVHandle ISE = GetExpressionSCEV(I);
if (isa<SCEVCouldNotCompute>(ISE)) return false;
// Get the start and stride for this expression.
SCEVHandle Start = SE->getIntegerSCEV(0, ISE->getType());
SCEVHandle Stride = Start;
if (!getSCEVStartAndStride(ISE, L, Start, Stride, SE))
return false; // Non-reducible symbolic expression, bail out.
std::vector<Instruction *> IUsers;
// Collect all I uses now because IVUseShouldUsePostIncValue may
// invalidate use_iterator.
for (Value::use_iterator UI = I->use_begin(), E = I->use_end(); UI != E; ++UI)
IUsers.push_back(cast<Instruction>(*UI));
for (unsigned iused_index = 0, iused_size = IUsers.size();
iused_index != iused_size; ++iused_index) {
Instruction *User = IUsers[iused_index];
// Do not infinitely recurse on PHI nodes.
if (isa<PHINode>(User) && Processed.count(User))
continue;
// Descend recursively, but not into PHI nodes outside the current loop.
// It's important to see the entire expression outside the loop to get
// choices that depend on addressing mode use right, although we won't
// consider references ouside the loop in all cases.
// If User is already in Processed, we don't want to recurse into it again,
// but do want to record a second reference in the same instruction.
bool AddUserToIVUsers = false;
if (LI->getLoopFor(User->getParent()) != L) {
if (isa<PHINode>(User) || Processed.count(User) ||
!AddUsersIfInteresting(User, L, Processed)) {
DOUT << "FOUND USER in other loop: " << *User
<< " OF SCEV: " << *ISE << "\n";
AddUserToIVUsers = true;
}
} else if (Processed.count(User) ||
!AddUsersIfInteresting(User, L, Processed)) {
DOUT << "FOUND USER: " << *User
<< " OF SCEV: " << *ISE << "\n";
AddUserToIVUsers = true;
}
if (AddUserToIVUsers) {
IVUsersOfOneStride &StrideUses = IVUsesByStride[Stride];
if (StrideUses.Users.empty()) // First occurrence of this stride?
StrideOrder.push_back(Stride);
// Okay, we found a user that we cannot reduce. Analyze the instruction
// and decide what to do with it. If we are a use inside of the loop, use
// the value before incrementation, otherwise use it after incrementation.
if (IVUseShouldUsePostIncValue(User, I, L, DT, this, DeadInsts)) {
// The value used will be incremented by the stride more than we are
// expecting, so subtract this off.
SCEVHandle NewStart = SE->getMinusSCEV(Start, Stride);
StrideUses.addUser(NewStart, User, I);
StrideUses.Users.back().isUseOfPostIncrementedValue = true;
DOUT << " USING POSTINC SCEV, START=" << *NewStart<< "\n";
} else {
StrideUses.addUser(Start, User, I);
}
}
}
return true;
}
namespace {
/// BasedUser - For a particular base value, keep information about how we've
/// partitioned the expression so far.
struct BasedUser {
/// SE - The current ScalarEvolution object.
ScalarEvolution *SE;
/// Base - The Base value for the PHI node that needs to be inserted for
/// this use. As the use is processed, information gets moved from this
/// field to the Imm field (below). BasedUser values are sorted by this
/// field.
SCEVHandle Base;
/// Inst - The instruction using the induction variable.
Instruction *Inst;
/// OperandValToReplace - The operand value of Inst to replace with the
/// EmittedBase.
Value *OperandValToReplace;
/// Imm - The immediate value that should be added to the base immediately
/// before Inst, because it will be folded into the imm field of the
/// instruction.
SCEVHandle Imm;
// isUseOfPostIncrementedValue - True if this should use the
// post-incremented version of this IV, not the preincremented version.
// This can only be set in special cases, such as the terminating setcc
// instruction for a loop and uses outside the loop that are dominated by
// the loop.
bool isUseOfPostIncrementedValue;
BasedUser(IVStrideUse &IVSU, ScalarEvolution *se)
: SE(se), Base(IVSU.Offset), Inst(IVSU.User),
OperandValToReplace(IVSU.OperandValToReplace),
Imm(SE->getIntegerSCEV(0, Base->getType())),
isUseOfPostIncrementedValue(IVSU.isUseOfPostIncrementedValue) {}
// Once we rewrite the code to insert the new IVs we want, update the
// operands of Inst to use the new expression 'NewBase', with 'Imm' added
// to it.
void RewriteInstructionToUseNewBase(const SCEVHandle &NewBase,
Instruction *InsertPt,
SCEVExpander &Rewriter, Loop *L, Pass *P,
SmallVectorImpl<Instruction*> &DeadInsts);
Value *InsertCodeForBaseAtPosition(const SCEVHandle &NewBase,
SCEVExpander &Rewriter,
Instruction *IP, Loop *L);
void dump() const;
};
}
void BasedUser::dump() const {
cerr << " Base=" << *Base;
cerr << " Imm=" << *Imm;
cerr << " Inst: " << *Inst;
}
Value *BasedUser::InsertCodeForBaseAtPosition(const SCEVHandle &NewBase,
SCEVExpander &Rewriter,
Instruction *IP, Loop *L) {
// Figure out where we *really* want to insert this code. In particular, if
// the user is inside of a loop that is nested inside of L, we really don't
// want to insert this expression before the user, we'd rather pull it out as
// many loops as possible.
LoopInfo &LI = Rewriter.getLoopInfo();
Instruction *BaseInsertPt = IP;
// Figure out the most-nested loop that IP is in.
Loop *InsertLoop = LI.getLoopFor(IP->getParent());
// If InsertLoop is not L, and InsertLoop is nested inside of L, figure out
// the preheader of the outer-most loop where NewBase is not loop invariant.
if (L->contains(IP->getParent()))
while (InsertLoop && NewBase->isLoopInvariant(InsertLoop)) {
BaseInsertPt = InsertLoop->getLoopPreheader()->getTerminator();
InsertLoop = InsertLoop->getParentLoop();
}
// If there is no immediate value, skip the next part.
if (Imm->isZero())
return Rewriter.expandCodeFor(NewBase, BaseInsertPt);
Value *Base = Rewriter.expandCodeFor(NewBase, BaseInsertPt);
// If we are inserting the base and imm values in the same block, make sure to
// adjust the IP position if insertion reused a result.
if (IP == BaseInsertPt)
IP = Rewriter.getInsertionPoint();
// Always emit the immediate (if non-zero) into the same block as the user.
SCEVHandle NewValSCEV = SE->getAddExpr(SE->getUnknown(Base), Imm);
return Rewriter.expandCodeFor(NewValSCEV, IP);
}
// Once we rewrite the code to insert the new IVs we want, update the
// operands of Inst to use the new expression 'NewBase', with 'Imm' added
// to it. NewBasePt is the last instruction which contributes to the
// value of NewBase in the case that it's a diffferent instruction from
// the PHI that NewBase is computed from, or null otherwise.
//
void BasedUser::RewriteInstructionToUseNewBase(const SCEVHandle &NewBase,
Instruction *NewBasePt,
SCEVExpander &Rewriter, Loop *L, Pass *P,
SmallVectorImpl<Instruction*> &DeadInsts){
if (!isa<PHINode>(Inst)) {
// By default, insert code at the user instruction.
BasicBlock::iterator InsertPt = Inst;
// However, if the Operand is itself an instruction, the (potentially
// complex) inserted code may be shared by many users. Because of this, we
// want to emit code for the computation of the operand right before its old
// computation. This is usually safe, because we obviously used to use the
// computation when it was computed in its current block. However, in some
// cases (e.g. use of a post-incremented induction variable) the NewBase
// value will be pinned to live somewhere after the original computation.
// In this case, we have to back off.
//
// If this is a use outside the loop (which means after, since it is based
// on a loop indvar) we use the post-incremented value, so that we don't
// artificially make the preinc value live out the bottom of the loop.
if (!isUseOfPostIncrementedValue && L->contains(Inst->getParent())) {
if (NewBasePt && isa<PHINode>(OperandValToReplace)) {
InsertPt = NewBasePt;
++InsertPt;
} else if (Instruction *OpInst
= dyn_cast<Instruction>(OperandValToReplace)) {
InsertPt = OpInst;
while (isa<PHINode>(InsertPt)) ++InsertPt;
}
}
Value *NewVal = InsertCodeForBaseAtPosition(NewBase, Rewriter, InsertPt, L);
// Adjust the type back to match the Inst. Note that we can't use InsertPt
// here because the SCEVExpander may have inserted the instructions after
// that point, in its efforts to avoid inserting redundant expressions.
if (isa<PointerType>(OperandValToReplace->getType())) {
NewVal = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr,
NewVal,
OperandValToReplace->getType());
}
// Replace the use of the operand Value with the new Phi we just created.
Inst->replaceUsesOfWith(OperandValToReplace, NewVal);
DOUT << " CHANGED: IMM =" << *Imm;
DOUT << " \tNEWBASE =" << *NewBase;
DOUT << " \tInst = " << *Inst;
return;
}
// PHI nodes are more complex. We have to insert one copy of the NewBase+Imm
// expression into each operand block that uses it. Note that PHI nodes can
// have multiple entries for the same predecessor. We use a map to make sure
// that a PHI node only has a single Value* for each predecessor (which also
// prevents us from inserting duplicate code in some blocks).
DenseMap<BasicBlock*, Value*> InsertedCode;
PHINode *PN = cast<PHINode>(Inst);
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
if (PN->getIncomingValue(i) == OperandValToReplace) {
// If the original expression is outside the loop, put the replacement
// code in the same place as the original expression,
// which need not be an immediate predecessor of this PHI. This way we
// need only one copy of it even if it is referenced multiple times in
// the PHI. We don't do this when the original expression is inside the
// loop because multiple copies sometimes do useful sinking of code in that
// case(?).
Instruction *OldLoc = dyn_cast<Instruction>(OperandValToReplace);
if (L->contains(OldLoc->getParent())) {
// If this is a critical edge, split the edge so that we do not insert the
// code on all predecessor/successor paths. We do this unless this is the
// canonical backedge for this loop, as this can make some inserted code
// be in an illegal position.
BasicBlock *PHIPred = PN->getIncomingBlock(i);
if (e != 1 && PHIPred->getTerminator()->getNumSuccessors() > 1 &&
(PN->getParent() != L->getHeader() || !L->contains(PHIPred))) {
// First step, split the critical edge.
SplitCriticalEdge(PHIPred, PN->getParent(), P, false);
// Next step: move the basic block. In particular, if the PHI node
// is outside of the loop, and PredTI is in the loop, we want to
// move the block to be immediately before the PHI block, not
// immediately after PredTI.
if (L->contains(PHIPred) && !L->contains(PN->getParent())) {
BasicBlock *NewBB = PN->getIncomingBlock(i);
NewBB->moveBefore(PN->getParent());
}
// Splitting the edge can reduce the number of PHI entries we have.
e = PN->getNumIncomingValues();
}
}
Value *&Code = InsertedCode[PN->getIncomingBlock(i)];
if (!Code) {
// Insert the code into the end of the predecessor block.
Instruction *InsertPt = (L->contains(OldLoc->getParent())) ?
PN->getIncomingBlock(i)->getTerminator() :
OldLoc->getParent()->getTerminator();
Code = InsertCodeForBaseAtPosition(NewBase, Rewriter, InsertPt, L);
// Adjust the type back to match the PHI. Note that we can't use
// InsertPt here because the SCEVExpander may have inserted its
// instructions after that point, in its efforts to avoid inserting
// redundant expressions.
if (isa<PointerType>(PN->getType())) {
Code = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr,
Code,
PN->getType());
}
}
// Replace the use of the operand Value with the new Phi we just created.
PN->setIncomingValue(i, Code);
Rewriter.clear();
}
}
// PHI node might have become a constant value after SplitCriticalEdge.
DeadInsts.push_back(Inst);
DOUT << " CHANGED: IMM =" << *Imm << " Inst = " << *Inst;
}
/// fitsInAddressMode - Return true if V can be subsumed within an addressing
/// mode, and does not need to be put in a register first.
static bool fitsInAddressMode(const SCEVHandle &V, const Type *UseTy,
const TargetLowering *TLI, bool HasBaseReg) {
if (SCEVConstant *SC = dyn_cast<SCEVConstant>(V)) {
int64_t VC = SC->getValue()->getSExtValue();
if (TLI) {
TargetLowering::AddrMode AM;
AM.BaseOffs = VC;
AM.HasBaseReg = HasBaseReg;
return TLI->isLegalAddressingMode(AM, UseTy);
} else {
// Defaults to PPC. PPC allows a sign-extended 16-bit immediate field.
return (VC > -(1 << 16) && VC < (1 << 16)-1);
}
}
if (SCEVUnknown *SU = dyn_cast<SCEVUnknown>(V))
if (ConstantExpr *CE = dyn_cast<ConstantExpr>(SU->getValue()))
if (TLI && CE->getOpcode() == Instruction::PtrToInt) {
Constant *Op0 = CE->getOperand(0);
if (GlobalValue *GV = dyn_cast<GlobalValue>(Op0)) {
TargetLowering::AddrMode AM;
AM.BaseGV = GV;
AM.HasBaseReg = HasBaseReg;
return TLI->isLegalAddressingMode(AM, UseTy);
}
}
return false;
}
/// MoveLoopVariantsToImmediateField - Move any subexpressions from Val that are
/// loop varying to the Imm operand.
static void MoveLoopVariantsToImmediateField(SCEVHandle &Val, SCEVHandle &Imm,
Loop *L, ScalarEvolution *SE) {
if (Val->isLoopInvariant(L)) return; // Nothing to do.
if (SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) {
std::vector<SCEVHandle> NewOps;
NewOps.reserve(SAE->getNumOperands());
for (unsigned i = 0; i != SAE->getNumOperands(); ++i)
if (!SAE->getOperand(i)->isLoopInvariant(L)) {
// If this is a loop-variant expression, it must stay in the immediate
// field of the expression.
Imm = SE->getAddExpr(Imm, SAE->getOperand(i));
} else {
NewOps.push_back(SAE->getOperand(i));
}
if (NewOps.empty())
Val = SE->getIntegerSCEV(0, Val->getType());
else
Val = SE->getAddExpr(NewOps);
} else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) {
// Try to pull immediates out of the start value of nested addrec's.
SCEVHandle Start = SARE->getStart();
MoveLoopVariantsToImmediateField(Start, Imm, L, SE);
std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Start;
Val = SE->getAddRecExpr(Ops, SARE->getLoop());
} else {
// Otherwise, all of Val is variant, move the whole thing over.
Imm = SE->getAddExpr(Imm, Val);
Val = SE->getIntegerSCEV(0, Val->getType());
}
}
/// MoveImmediateValues - Look at Val, and pull out any additions of constants
/// that can fit into the immediate field of instructions in the target.
/// Accumulate these immediate values into the Imm value.
static void MoveImmediateValues(const TargetLowering *TLI,
Instruction *User,
SCEVHandle &Val, SCEVHandle &Imm,
bool isAddress, Loop *L,
ScalarEvolution *SE) {
const Type *UseTy = User->getType();
if (StoreInst *SI = dyn_cast<StoreInst>(User))
UseTy = SI->getOperand(0)->getType();
if (SCEVAddExpr *SAE = dyn_cast<SCEVAddExpr>(Val)) {
std::vector<SCEVHandle> NewOps;
NewOps.reserve(SAE->getNumOperands());
for (unsigned i = 0; i != SAE->getNumOperands(); ++i) {
SCEVHandle NewOp = SAE->getOperand(i);
MoveImmediateValues(TLI, User, NewOp, Imm, isAddress, L, SE);
if (!NewOp->isLoopInvariant(L)) {
// If this is a loop-variant expression, it must stay in the immediate
// field of the expression.
Imm = SE->getAddExpr(Imm, NewOp);
} else {
NewOps.push_back(NewOp);
}
}
if (NewOps.empty())
Val = SE->getIntegerSCEV(0, Val->getType());
else
Val = SE->getAddExpr(NewOps);
return;
} else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Val)) {
// Try to pull immediates out of the start value of nested addrec's.
SCEVHandle Start = SARE->getStart();
MoveImmediateValues(TLI, User, Start, Imm, isAddress, L, SE);
if (Start != SARE->getStart()) {
std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Start;
Val = SE->getAddRecExpr(Ops, SARE->getLoop());
}
return;
} else if (SCEVMulExpr *SME = dyn_cast<SCEVMulExpr>(Val)) {
// Transform "8 * (4 + v)" -> "32 + 8*V" if "32" fits in the immed field.
if (isAddress && fitsInAddressMode(SME->getOperand(0), UseTy, TLI, false) &&
SME->getNumOperands() == 2 && SME->isLoopInvariant(L)) {
SCEVHandle SubImm = SE->getIntegerSCEV(0, Val->getType());
SCEVHandle NewOp = SME->getOperand(1);
MoveImmediateValues(TLI, User, NewOp, SubImm, isAddress, L, SE);
// If we extracted something out of the subexpressions, see if we can
// simplify this!
if (NewOp != SME->getOperand(1)) {
// Scale SubImm up by "8". If the result is a target constant, we are
// good.
SubImm = SE->getMulExpr(SubImm, SME->getOperand(0));
if (fitsInAddressMode(SubImm, UseTy, TLI, false)) {
// Accumulate the immediate.
Imm = SE->getAddExpr(Imm, SubImm);
// Update what is left of 'Val'.
Val = SE->getMulExpr(SME->getOperand(0), NewOp);
return;
}
}
}
}
// Loop-variant expressions must stay in the immediate field of the
// expression.
if ((isAddress && fitsInAddressMode(Val, UseTy, TLI, false)) ||
!Val->isLoopInvariant(L)) {
Imm = SE->getAddExpr(Imm, Val);
Val = SE->getIntegerSCEV(0, Val->getType());
return;
}
// Otherwise, no immediates to move.
}
/// SeparateSubExprs - Decompose Expr into all of the subexpressions that are
/// added together. This is used to reassociate common addition subexprs
/// together for maximal sharing when rewriting bases.
static void SeparateSubExprs(std::vector<SCEVHandle> &SubExprs,
SCEVHandle Expr,
ScalarEvolution *SE) {
if (SCEVAddExpr *AE = dyn_cast<SCEVAddExpr>(Expr)) {
for (unsigned j = 0, e = AE->getNumOperands(); j != e; ++j)
SeparateSubExprs(SubExprs, AE->getOperand(j), SE);
} else if (SCEVAddRecExpr *SARE = dyn_cast<SCEVAddRecExpr>(Expr)) {
SCEVHandle Zero = SE->getIntegerSCEV(0, Expr->getType());
if (SARE->getOperand(0) == Zero) {
SubExprs.push_back(Expr);
} else {
// Compute the addrec with zero as its base.
std::vector<SCEVHandle> Ops(SARE->op_begin(), SARE->op_end());
Ops[0] = Zero; // Start with zero base.
SubExprs.push_back(SE->getAddRecExpr(Ops, SARE->getLoop()));
SeparateSubExprs(SubExprs, SARE->getOperand(0), SE);
}
} else if (!Expr->isZero()) {
// Do not add zero.
SubExprs.push_back(Expr);
}
}
// This is logically local to the following function, but C++ says we have
// to make it file scope.
struct SubExprUseData { unsigned Count; bool notAllUsesAreFree; };
/// RemoveCommonExpressionsFromUseBases - Look through all of the Bases of all
/// the Uses, removing any common subexpressions, except that if all such
/// subexpressions can be folded into an addressing mode for all uses inside
/// the loop (this case is referred to as "free" in comments herein) we do
/// not remove anything. This looks for things like (a+b+c) and
/// (a+c+d) and computes the common (a+c) subexpression. The common expression
/// is *removed* from the Bases and returned.
static SCEVHandle
RemoveCommonExpressionsFromUseBases(std::vector<BasedUser> &Uses,
ScalarEvolution *SE, Loop *L,
const TargetLowering *TLI) {
unsigned NumUses = Uses.size();
// Only one use? This is a very common case, so we handle it specially and
// cheaply.
SCEVHandle Zero = SE->getIntegerSCEV(0, Uses[0].Base->getType());
SCEVHandle Result = Zero;
SCEVHandle FreeResult = Zero;
if (NumUses == 1) {
// If the use is inside the loop, use its base, regardless of what it is:
// it is clearly shared across all the IV's. If the use is outside the loop
// (which means after it) we don't want to factor anything *into* the loop,
// so just use 0 as the base.
if (L->contains(Uses[0].Inst->getParent()))
std::swap(Result, Uses[0].Base);
return Result;
}
// To find common subexpressions, count how many of Uses use each expression.
// If any subexpressions are used Uses.size() times, they are common.
// Also track whether all uses of each expression can be moved into an
// an addressing mode "for free"; such expressions are left within the loop.
// struct SubExprUseData { unsigned Count; bool notAllUsesAreFree; };
std::map<SCEVHandle, SubExprUseData> SubExpressionUseData;
// UniqueSubExprs - Keep track of all of the subexpressions we see in the
// order we see them.
std::vector<SCEVHandle> UniqueSubExprs;
std::vector<SCEVHandle> SubExprs;
unsigned NumUsesInsideLoop = 0;
for (unsigned i = 0; i != NumUses; ++i) {
// If the user is outside the loop, just ignore it for base computation.
// Since the user is outside the loop, it must be *after* the loop (if it
// were before, it could not be based on the loop IV). We don't want users
// after the loop to affect base computation of values *inside* the loop,
// because we can always add their offsets to the result IV after the loop
// is done, ensuring we get good code inside the loop.
if (!L->contains(Uses[i].Inst->getParent()))
continue;
NumUsesInsideLoop++;
// If the base is zero (which is common), return zero now, there are no
// CSEs we can find.
if (Uses[i].Base == Zero) return Zero;
// If this use is as an address we may be able to put CSEs in the addressing
// mode rather than hoisting them.
bool isAddrUse = isAddressUse(Uses[i].Inst, Uses[i].OperandValToReplace);
// We may need the UseTy below, but only when isAddrUse, so compute it
// only in that case.
const Type *UseTy = 0;
if (isAddrUse) {
UseTy = Uses[i].Inst->getType();
if (StoreInst *SI = dyn_cast<StoreInst>(Uses[i].Inst))
UseTy = SI->getOperand(0)->getType();
}
// Split the expression into subexprs.
SeparateSubExprs(SubExprs, Uses[i].Base, SE);
// Add one to SubExpressionUseData.Count for each subexpr present, and
// if the subexpr is not a valid immediate within an addressing mode use,
// set SubExpressionUseData.notAllUsesAreFree. We definitely want to
// hoist these out of the loop (if they are common to all uses).
for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) {
if (++SubExpressionUseData[SubExprs[j]].Count == 1)
UniqueSubExprs.push_back(SubExprs[j]);
if (!isAddrUse || !fitsInAddressMode(SubExprs[j], UseTy, TLI, false))
SubExpressionUseData[SubExprs[j]].notAllUsesAreFree = true;
}
SubExprs.clear();
}
// Now that we know how many times each is used, build Result. Iterate over
// UniqueSubexprs so that we have a stable ordering.
for (unsigned i = 0, e = UniqueSubExprs.size(); i != e; ++i) {
std::map<SCEVHandle, SubExprUseData>::iterator I =
SubExpressionUseData.find(UniqueSubExprs[i]);
assert(I != SubExpressionUseData.end() && "Entry not found?");
if (I->second.Count == NumUsesInsideLoop) { // Found CSE!
if (I->second.notAllUsesAreFree)
Result = SE->getAddExpr(Result, I->first);
else
FreeResult = SE->getAddExpr(FreeResult, I->first);
} else
// Remove non-cse's from SubExpressionUseData.
SubExpressionUseData.erase(I);
}
if (FreeResult != Zero) {
// We have some subexpressions that can be subsumed into addressing
// modes in every use inside the loop. However, it's possible that
// there are so many of them that the combined FreeResult cannot
// be subsumed, or that the target cannot handle both a FreeResult
// and a Result in the same instruction (for example because it would
// require too many registers). Check this.
for (unsigned i=0; i<NumUses; ++i) {
if (!L->contains(Uses[i].Inst->getParent()))
continue;
// We know this is an addressing mode use; if there are any uses that
// are not, FreeResult would be Zero.
const Type *UseTy = Uses[i].Inst->getType();
if (StoreInst *SI = dyn_cast<StoreInst>(Uses[i].Inst))
UseTy = SI->getOperand(0)->getType();
if (!fitsInAddressMode(FreeResult, UseTy, TLI, Result!=Zero)) {
// FIXME: could split up FreeResult into pieces here, some hoisted
// and some not. There is no obvious advantage to this.
Result = SE->getAddExpr(Result, FreeResult);
FreeResult = Zero;
break;
}
}
}
// If we found no CSE's, return now.
if (Result == Zero) return Result;
// If we still have a FreeResult, remove its subexpressions from
// SubExpressionUseData. This means they will remain in the use Bases.
if (FreeResult != Zero) {
SeparateSubExprs(SubExprs, FreeResult, SE);
for (unsigned j = 0, e = SubExprs.size(); j != e; ++j) {
std::map<SCEVHandle, SubExprUseData>::iterator I =
SubExpressionUseData.find(SubExprs[j]);
SubExpressionUseData.erase(I);
}
SubExprs.clear();
}
// Otherwise, remove all of the CSE's we found from each of the base values.
for (unsigned i = 0; i != NumUses; ++i) {
// Uses outside the loop don't necessarily include the common base, but
// the final IV value coming into those uses does. Instead of trying to
// remove the pieces of the common base, which might not be there,
// subtract off the base to compensate for this.
if (!L->contains(Uses[i].Inst->getParent())) {
Uses[i].Base = SE->getMinusSCEV(Uses[i].Base, Result);
continue;
}
// Split the expression into subexprs.
SeparateSubExprs(SubExprs, Uses[i].Base, SE);
// Remove any common subexpressions.
for (unsigned j = 0, e = SubExprs.size(); j != e; ++j)
if (SubExpressionUseData.count(SubExprs[j])) {
SubExprs.erase(SubExprs.begin()+j);
--j; --e;
}
// Finally, add the non-shared expressions together.
if (SubExprs.empty())
Uses[i].Base = Zero;
else
Uses[i].Base = SE->getAddExpr(SubExprs);
SubExprs.clear();
}
return Result;
}
/// ValidStride - Check whether the given Scale is valid for all loads and
/// stores in UsersToProcess.
///
bool LoopStrengthReduce::ValidStride(bool HasBaseReg,
int64_t Scale,
const std::vector<BasedUser>& UsersToProcess) {
if (!TLI)
return true;
for (unsigned i=0, e = UsersToProcess.size(); i!=e; ++i) {
// If this is a load or other access, pass the type of the access in.
const Type *AccessTy = Type::VoidTy;
if (StoreInst *SI = dyn_cast<StoreInst>(UsersToProcess[i].Inst))
AccessTy = SI->getOperand(0)->getType();
else if (LoadInst *LI = dyn_cast<LoadInst>(UsersToProcess[i].Inst))
AccessTy = LI->getType();
else if (isa<PHINode>(UsersToProcess[i].Inst))
continue;
TargetLowering::AddrMode AM;
if (SCEVConstant *SC = dyn_cast<SCEVConstant>(UsersToProcess[i].Imm))
AM.BaseOffs = SC->getValue()->getSExtValue();
AM.HasBaseReg = HasBaseReg || !UsersToProcess[i].Base->isZero();
AM.Scale = Scale;
// If load[imm+r*scale] is illegal, bail out.
if (!TLI->isLegalAddressingMode(AM, AccessTy))
return false;
}
return true;
}
/// RequiresTypeConversion - Returns true if converting Ty to NewTy is not
/// a nop.
bool LoopStrengthReduce::RequiresTypeConversion(const Type *Ty1,
const Type *Ty2) {
if (Ty1 == Ty2)
return false;
if (TLI && TLI->isTruncateFree(Ty1, Ty2))
return false;
return (!Ty1->canLosslesslyBitCastTo(Ty2) &&
!(isa<PointerType>(Ty2) &&
Ty1->canLosslesslyBitCastTo(UIntPtrTy)) &&
!(isa<PointerType>(Ty1) &&
Ty2->canLosslesslyBitCastTo(UIntPtrTy)));
}
/// CheckForIVReuse - Returns the multiple if the stride is the multiple
/// of a previous stride and it is a legal value for the target addressing
/// mode scale component and optional base reg. This allows the users of
/// this stride to be rewritten as prev iv * factor. It returns 0 if no
/// reuse is possible. Factors can be negative on same targets, e.g. ARM.
///
/// If all uses are outside the loop, we don't require that all multiplies
/// be folded into the addressing mode, nor even that the factor be constant;
/// a multiply (executed once) outside the loop is better than another IV
/// within. Well, usually.
SCEVHandle LoopStrengthReduce::CheckForIVReuse(bool HasBaseReg,
bool AllUsesAreAddresses,
bool AllUsesAreOutsideLoop,
const SCEVHandle &Stride,
IVExpr &IV, const Type *Ty,
const std::vector<BasedUser>& UsersToProcess) {
if (SCEVConstant *SC = dyn_cast<SCEVConstant>(Stride)) {
int64_t SInt = SC->getValue()->getSExtValue();
for (unsigned NewStride = 0, e = StrideOrder.size(); NewStride != e;
++NewStride) {
std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
IVsByStride.find(StrideOrder[NewStride]);
if (SI == IVsByStride.end() || !isa<SCEVConstant>(SI->first))
continue;
int64_t SSInt = cast<SCEVConstant>(SI->first)->getValue()->getSExtValue();
if (SI->first != Stride &&
(unsigned(abs(SInt)) < SSInt || (SInt % SSInt) != 0))
continue;
int64_t Scale = SInt / SSInt;
// Check that this stride is valid for all the types used for loads and
// stores; if it can be used for some and not others, we might as well use
// the original stride everywhere, since we have to create the IV for it
// anyway. If the scale is 1, then we don't need to worry about folding
// multiplications.
if (Scale == 1 ||
(AllUsesAreAddresses &&
ValidStride(HasBaseReg, Scale, UsersToProcess)))
for (std::vector<IVExpr>::iterator II = SI->second.IVs.begin(),
IE = SI->second.IVs.end(); II != IE; ++II)
// FIXME: Only handle base == 0 for now.
// Only reuse previous IV if it would not require a type conversion.
if (II->Base->isZero() &&
!RequiresTypeConversion(II->Base->getType(), Ty)) {
IV = *II;
return SE->getIntegerSCEV(Scale, Stride->getType());
}
}
} else if (AllUsesAreOutsideLoop) {
// Accept nonconstant strides here; it is really really right to substitute
// an existing IV if we can.
for (unsigned NewStride = 0, e = StrideOrder.size(); NewStride != e;
++NewStride) {
std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
IVsByStride.find(StrideOrder[NewStride]);
if (SI == IVsByStride.end() || !isa<SCEVConstant>(SI->first))
continue;
int64_t SSInt = cast<SCEVConstant>(SI->first)->getValue()->getSExtValue();
if (SI->first != Stride && SSInt != 1)
continue;
for (std::vector<IVExpr>::iterator II = SI->second.IVs.begin(),
IE = SI->second.IVs.end(); II != IE; ++II)
// Accept nonzero base here.
// Only reuse previous IV if it would not require a type conversion.
if (!RequiresTypeConversion(II->Base->getType(), Ty)) {
IV = *II;
return Stride;
}
}
// Special case, old IV is -1*x and this one is x. Can treat this one as
// -1*old.
for (unsigned NewStride = 0, e = StrideOrder.size(); NewStride != e;
++NewStride) {
std::map<SCEVHandle, IVsOfOneStride>::iterator SI =
IVsByStride.find(StrideOrder[NewStride]);
if (SI == IVsByStride.end())
continue;
if (SCEVMulExpr *ME = dyn_cast<SCEVMulExpr>(SI->first))
if (SCEVConstant *SC = dyn_cast<SCEVConstant>(ME->getOperand(0)))
if (Stride == ME->getOperand(1) &&
SC->getValue()->getSExtValue() == -1LL)
for (std::vector<IVExpr>::iterator II = SI->second.IVs.begin(),
IE = SI->second.IVs.end(); II != IE; ++II)
// Accept nonzero base here.
// Only reuse previous IV if it would not require type conversion.
if (!RequiresTypeConversion(II->Base->getType(), Ty)) {
IV = *II;
return SE->getIntegerSCEV(-1LL, Stride->getType());
}
}
}
return SE->getIntegerSCEV(0, Stride->getType());
}
/// PartitionByIsUseOfPostIncrementedValue - Simple boolean predicate that
/// returns true if Val's isUseOfPostIncrementedValue is true.
static bool PartitionByIsUseOfPostIncrementedValue(const BasedUser &Val) {
return Val.isUseOfPostIncrementedValue;
}
/// isNonConstantNegative - Return true if the specified scev is negated, but
/// not a constant.
static bool isNonConstantNegative(const SCEVHandle &Expr) {
SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(Expr);
if (!Mul) return false;
// If there is a constant factor, it will be first.
SCEVConstant *SC = dyn_cast<SCEVConstant>(Mul->getOperand(0));
if (!SC) return false;
// Return true if the value is negative, this matches things like (-42 * V).
return SC->getValue()->getValue().isNegative();
}
// CollectIVUsers - Transform our list of users and offsets to a bit more
// complex table. In this new vector, each 'BasedUser' contains 'Base', the base
// of the strided accesses, as well as the old information from Uses. We
// progressively move information from the Base field to the Imm field, until
// we eventually have the full access expression to rewrite the use.
SCEVHandle LoopStrengthReduce::CollectIVUsers(const SCEVHandle &Stride,
IVUsersOfOneStride &Uses,
Loop *L,
bool &AllUsesAreAddresses,
bool &AllUsesAreOutsideLoop,
std::vector<BasedUser> &UsersToProcess) {
UsersToProcess.reserve(Uses.Users.size());
for (unsigned i = 0, e = Uses.Users.size(); i != e; ++i) {
UsersToProcess.push_back(BasedUser(Uses.Users[i], SE));
// Move any loop variant operands from the offset field to the immediate
// field of the use, so that we don't try to use something before it is
// computed.
MoveLoopVariantsToImmediateField(UsersToProcess.back().Base,
UsersToProcess.back().Imm, L, SE);
assert(UsersToProcess.back().Base->isLoopInvariant(L) &&
"Base value is not loop invariant!");
}
// We now have a whole bunch of uses of like-strided induction variables, but
// they might all have different bases. We want to emit one PHI node for this
// stride which we fold as many common expressions (between the IVs) into as
// possible. Start by identifying the common expressions in the base values
// for the strides (e.g. if we have "A+C+B" and "A+B+D" as our bases, find
// "A+B"), emit it to the preheader, then remove the expression from the
// UsersToProcess base values.
SCEVHandle CommonExprs =
RemoveCommonExpressionsFromUseBases(UsersToProcess, SE, L, TLI);
// Next, figure out what we can represent in the immediate fields of
// instructions. If we can represent anything there, move it to the imm
// fields of the BasedUsers. We do this so that it increases the commonality
// of the remaining uses.
unsigned NumPHI = 0;
for (unsigned i = 0, e = UsersToProcess.size(); i != e; ++i) {
// If the user is not in the current loop, this means it is using the exit
// value of the IV. Do not put anything in the base, make sure it's all in
// the immediate field to allow as much factoring as possible.
if (!L->contains(UsersToProcess[i].Inst->getParent())) {
UsersToProcess[i].Imm = SE->getAddExpr(UsersToProcess[i].Imm,
UsersToProcess[i].Base);
UsersToProcess[i].Base =
SE->getIntegerSCEV(0, UsersToProcess[i].Base->getType());
} else {
// Addressing modes can be folded into loads and stores. Be careful that
// the store is through the expression, not of the expression though.
bool isPHI = false;
bool isAddress = isAddressUse(UsersToProcess[i].Inst,
UsersToProcess[i].OperandValToReplace);
if (isa<PHINode>(UsersToProcess[i].Inst)) {
isPHI = true;
++NumPHI;
}
// Not all uses are outside the loop.
AllUsesAreOutsideLoop = false;
// If this use isn't an address, then not all uses are addresses.
if (!isAddress && !isPHI)
AllUsesAreAddresses = false;
MoveImmediateValues(TLI, UsersToProcess[i].Inst, UsersToProcess[i].Base,
UsersToProcess[i].Imm, isAddress, L, SE);
}
}
// If one of the use if a PHI node and all other uses are addresses, still
// allow iv reuse. Essentially we are trading one constant multiplication
// for one fewer iv.
if (NumPHI > 1)
AllUsesAreAddresses = false;
return CommonExprs;
}
/// StrengthReduceStridedIVUsers - Strength reduce all of the users of a single
/// stride of IV. All of the users may have different starting values, and this
/// may not be the only stride (we know it is if isOnlyStride is true).
void LoopStrengthReduce::StrengthReduceStridedIVUsers(const SCEVHandle &Stride,
IVUsersOfOneStride &Uses,
Loop *L,
bool isOnlyStride) {
// If all the users are moved to another stride, then there is nothing to do.
if (Uses.Users.empty())
return;
// Keep track if every use in UsersToProcess is an address. If they all are,
// we may be able to rewrite the entire collection of them in terms of a
// smaller-stride IV.
bool AllUsesAreAddresses = true;
// Keep track if every use of a single stride is outside the loop. If so,
// we want to be more aggressive about reusing a smaller-stride IV; a
// multiply outside the loop is better than another IV inside. Well, usually.
bool AllUsesAreOutsideLoop = true;
// Transform our list of users and offsets to a bit more complex table. In
// this new vector, each 'BasedUser' contains 'Base' the base of the
// strided accessas well as the old information from Uses. We progressively
// move information from the Base field to the Imm field, until we eventually
// have the full access expression to rewrite the use.
std::vector<BasedUser> UsersToProcess;
SCEVHandle CommonExprs = CollectIVUsers(Stride, Uses, L, AllUsesAreAddresses,
AllUsesAreOutsideLoop,
UsersToProcess);
// If we managed to find some expressions in common, we'll need to carry
// their value in a register and add it in for each use. This will take up
// a register operand, which potentially restricts what stride values are
// valid.
bool HaveCommonExprs = !CommonExprs->isZero();
// If all uses are addresses, check if it is possible to reuse an IV with a
// stride that is a factor of this stride. And that the multiple is a number
// that can be encoded in the scale field of the target addressing mode. And
// that we will have a valid instruction after this substition, including the
// immediate field, if any.
PHINode *NewPHI = NULL;
Value *IncV = NULL;
IVExpr ReuseIV(SE->getIntegerSCEV(0, Type::Int32Ty),
SE->getIntegerSCEV(0, Type::Int32Ty),
0, 0);
SCEVHandle RewriteFactor =
CheckForIVReuse(HaveCommonExprs, AllUsesAreAddresses,
AllUsesAreOutsideLoop,
Stride, ReuseIV, CommonExprs->getType(),
UsersToProcess);
if (!isa<SCEVConstant>(RewriteFactor) ||
!cast<SCEVConstant>(RewriteFactor)->isZero()) {
DOUT << "BASED ON IV of STRIDE " << *ReuseIV.Stride
<< " and BASE " << *ReuseIV.Base << " :\n";
NewPHI = ReuseIV.PHI;
IncV = ReuseIV.IncV;
}
const Type *ReplacedTy = CommonExprs->getType();
// Now that we know what we need to do, insert the PHI node itself.
//
DOUT << "INSERTING IV of TYPE " << *ReplacedTy << " of STRIDE "
<< *Stride << " and BASE " << *CommonExprs << ": ";
SCEVExpander Rewriter(*SE, *LI);
SCEVExpander PreheaderRewriter(*SE, *LI);
BasicBlock *Preheader = L->getLoopPreheader();
Instruction *PreInsertPt = Preheader->getTerminator();
Instruction *PhiInsertBefore = L->getHeader()->begin();
BasicBlock *LatchBlock = L->getLoopLatch();
// Emit the initial base value into the loop preheader.
Value *CommonBaseV
= PreheaderRewriter.expandCodeFor(CommonExprs, PreInsertPt);
if (isa<SCEVConstant>(RewriteFactor) &&
cast<SCEVConstant>(RewriteFactor)->isZero()) {
// Create a new Phi for this base, and stick it in the loop header.
NewPHI = PHINode::Create(ReplacedTy, "iv.", PhiInsertBefore);
++NumInserted;
// Add common base to the new Phi node.
NewPHI->addIncoming(CommonBaseV, Preheader);
// If the stride is negative, insert a sub instead of an add for the
// increment.
bool isNegative = isNonConstantNegative(Stride);
SCEVHandle IncAmount = Stride;
if (isNegative)
IncAmount = SE->getNegativeSCEV(Stride);
// Insert the stride into the preheader.
Value *StrideV = PreheaderRewriter.expandCodeFor(IncAmount, PreInsertPt);
if (!isa<ConstantInt>(StrideV)) ++NumVariable;
// Emit the increment of the base value before the terminator of the loop
// latch block, and add it to the Phi node.
SCEVHandle IncExp = SE->getUnknown(StrideV);
if (isNegative)
IncExp = SE->getNegativeSCEV(IncExp);
IncExp = SE->getAddExpr(SE->getUnknown(NewPHI), IncExp);
IncV = Rewriter.expandCodeFor(IncExp, LatchBlock->getTerminator());
IncV->setName(NewPHI->getName()+".inc");
NewPHI->addIncoming(IncV, LatchBlock);
// Remember this in case a later stride is multiple of this.
IVsByStride[Stride].addIV(Stride, CommonExprs, NewPHI, IncV);
DOUT << " IV=%" << NewPHI->getNameStr() << " INC=%" << IncV->getNameStr();
} else {
Constant *C = dyn_cast<Constant>(CommonBaseV);
if (!C ||
(!C->isNullValue() &&
!fitsInAddressMode(SE->getUnknown(CommonBaseV), ReplacedTy,
TLI, false)))
// We want the common base emitted into the preheader! This is just
// using cast as a copy so BitCast (no-op cast) is appropriate
CommonBaseV = new BitCastInst(CommonBaseV, CommonBaseV->getType(),
"commonbase", PreInsertPt);
}
DOUT << "\n";
// We want to emit code for users inside the loop first. To do this, we
// rearrange BasedUser so that the entries at the end have
// isUseOfPostIncrementedValue = false, because we pop off the end of the
// vector (so we handle them first).
std::partition(UsersToProcess.begin(), UsersToProcess.end(),
PartitionByIsUseOfPostIncrementedValue);
// Sort this by base, so that things with the same base are handled
// together. By partitioning first and stable-sorting later, we are
// guaranteed that within each base we will pop off users from within the
// loop before users outside of the loop with a particular base.
//
// We would like to use stable_sort here, but we can't. The problem is that
// SCEVHandle's don't have a deterministic ordering w.r.t to each other, so
// we don't have anything to do a '<' comparison on. Because we think the
// number of uses is small, do a horrible bubble sort which just relies on
// ==.
for (unsigned i = 0, e = UsersToProcess.size(); i != e; ++i) {
// Get a base value.
SCEVHandle Base = UsersToProcess[i].Base;
// Compact everything with this base to be consecutive with this one.
for (unsigned j = i+1; j != e; ++j) {
if (UsersToProcess[j].Base == Base) {
std::swap(UsersToProcess[i+1], UsersToProcess[j]);
++i;
}
}
}
// Process all the users now. This outer loop handles all bases, the inner
// loop handles all users of a particular base.
while (!UsersToProcess.empty()) {
SCEVHandle Base = UsersToProcess.back().Base;
// Emit the code for Base into the preheader.
Value *BaseV = PreheaderRewriter.expandCodeFor(Base, PreInsertPt);
DOUT << " INSERTING code for BASE = " << *Base << ":";
if (BaseV->hasName())
DOUT << " Result value name = %" << BaseV->getNameStr();
DOUT << "\n";
// If BaseV is a constant other than 0, make sure that it gets inserted into
// the preheader, instead of being forward substituted into the uses. We do
// this by forcing a BitCast (noop cast) to be inserted into the preheader
// in this case.
if (Constant *C = dyn_cast<Constant>(BaseV)) {
if (!C->isNullValue() && !fitsInAddressMode(Base, ReplacedTy,
TLI, false)) {
// We want this constant emitted into the preheader! This is just
// using cast as a copy so BitCast (no-op cast) is appropriate
BaseV = new BitCastInst(BaseV, BaseV->getType(), "preheaderinsert",
PreInsertPt);
}
}
// Emit the code to add the immediate offset to the Phi value, just before
// the instructions that we identified as using this stride and base.
do {
// FIXME: Use emitted users to emit other users.
BasedUser &User = UsersToProcess.back();
// If this instruction wants to use the post-incremented value, move it
// after the post-inc and use its value instead of the PHI.
Value *RewriteOp = NewPHI;
if (User.isUseOfPostIncrementedValue) {
RewriteOp = IncV;
// If this user is in the loop, make sure it is the last thing in the
// loop to ensure it is dominated by the increment.
if (L->contains(User.Inst->getParent()))
User.Inst->moveBefore(LatchBlock->getTerminator());
}
if (RewriteOp->getType() != ReplacedTy) {
Instruction::CastOps opcode = Instruction::Trunc;
if (ReplacedTy->getPrimitiveSizeInBits() ==
RewriteOp->getType()->getPrimitiveSizeInBits())
opcode = Instruction::BitCast;
RewriteOp = SCEVExpander::InsertCastOfTo(opcode, RewriteOp, ReplacedTy);
}
SCEVHandle RewriteExpr = SE->getUnknown(RewriteOp);
// If we had to insert new instructions for RewriteOp, we have to
// consider that they may not have been able to end up immediately
// next to RewriteOp, because non-PHI instructions may never precede
// PHI instructions in a block. In this case, remember where the last
// instruction was inserted so that if we're replacing a different
// PHI node, we can use the later point to expand the final
// RewriteExpr.
Instruction *NewBasePt = dyn_cast<Instruction>(RewriteOp);
if (RewriteOp == NewPHI) NewBasePt = 0;
// Clear the SCEVExpander's expression map so that we are guaranteed
// to have the code emitted where we expect it.
Rewriter.clear();
// If we are reusing the iv, then it must be multiplied by a constant
// factor take advantage of addressing mode scale component.
if (!isa<SCEVConstant>(RewriteFactor) ||
!cast<SCEVConstant>(RewriteFactor)->isZero()) {
// If we're reusing an IV with a nonzero base (currently this happens
// only when all reuses are outside the loop) subtract that base here.
// The base has been used to initialize the PHI node but we don't want
// it here.
if (!ReuseIV.Base->isZero())
RewriteExpr = SE->getMinusSCEV(RewriteExpr, ReuseIV.Base);
// Multiply old variable, with base removed, by new scale factor.
RewriteExpr = SE->getMulExpr(RewriteFactor,
RewriteExpr);
// The common base is emitted in the loop preheader. But since we
// are reusing an IV, it has not been used to initialize the PHI node.
// Add it to the expression used to rewrite the uses.
// When this use is outside the loop, we earlier subtracted the
// common base, and are adding it back here. Use the same expression
// as before, rather than CommonBaseV, so DAGCombiner will zap it.
if (!isa<ConstantInt>(CommonBaseV) ||
!cast<ConstantInt>(CommonBaseV)->isZero()) {
if (L->contains(User.Inst->getParent()))
RewriteExpr = SE->getAddExpr(RewriteExpr,
SE->getUnknown(CommonBaseV));
else
RewriteExpr = SE->getAddExpr(RewriteExpr, CommonExprs);
}
}
// Now that we know what we need to do, insert code before User for the
// immediate and any loop-variant expressions.
if (!isa<ConstantInt>(BaseV) || !cast<ConstantInt>(BaseV)->isZero())
// Add BaseV to the PHI value if needed.
RewriteExpr = SE->getAddExpr(RewriteExpr, SE->getUnknown(BaseV));
User.RewriteInstructionToUseNewBase(RewriteExpr, NewBasePt,
Rewriter, L, this,
DeadInsts);
// Mark old value we replaced as possibly dead, so that it is eliminated
// if we just replaced the last use of that value.
DeadInsts.push_back(cast<Instruction>(User.OperandValToReplace));
UsersToProcess.pop_back();
++NumReduced;
// If there are any more users to process with the same base, process them
// now. We sorted by base above, so we just have to check the last elt.
} while (!UsersToProcess.empty() && UsersToProcess.back().Base == Base);
// TODO: Next, find out which base index is the most common, pull it out.
}
// IMPORTANT TODO: Figure out how to partition the IV's with this stride, but
// different starting values, into different PHIs.
}
/// FindIVUserForCond - If Cond has an operand that is an expression of an IV,
/// set the IV user and stride information and return true, otherwise return
/// false.
bool LoopStrengthReduce::FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse,
const SCEVHandle *&CondStride) {
for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e && !CondUse;
++Stride) {
std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI =
IVUsesByStride.find(StrideOrder[Stride]);
assert(SI != IVUsesByStride.end() && "Stride doesn't exist!");
for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(),
E = SI->second.Users.end(); UI != E; ++UI)
if (UI->User == Cond) {
// NOTE: we could handle setcc instructions with multiple uses here, but
// InstCombine does it as well for simple uses, it's not clear that it
// occurs enough in real life to handle.
CondUse = &*UI;
CondStride = &SI->first;
return true;
}
}
return false;
}
namespace {
// Constant strides come first which in turns are sorted by their absolute
// values. If absolute values are the same, then positive strides comes first.
// e.g.
// 4, -1, X, 1, 2 ==> 1, -1, 2, 4, X
struct StrideCompare {
bool operator()(const SCEVHandle &LHS, const SCEVHandle &RHS) {
SCEVConstant *LHSC = dyn_cast<SCEVConstant>(LHS);
SCEVConstant *RHSC = dyn_cast<SCEVConstant>(RHS);
if (LHSC && RHSC) {
int64_t LV = LHSC->getValue()->getSExtValue();
int64_t RV = RHSC->getValue()->getSExtValue();
uint64_t ALV = (LV < 0) ? -LV : LV;
uint64_t ARV = (RV < 0) ? -RV : RV;
if (ALV == ARV)
return LV > RV;
else
return ALV < ARV;
}
return (LHSC && !RHSC);
}
};
}
/// ChangeCompareStride - If a loop termination compare instruction is the
/// only use of its stride, and the compaison is against a constant value,
/// try eliminate the stride by moving the compare instruction to another
/// stride and change its constant operand accordingly. e.g.
///
/// loop:
/// ...
/// v1 = v1 + 3
/// v2 = v2 + 1
/// if (v2 < 10) goto loop
/// =>
/// loop:
/// ...
/// v1 = v1 + 3
/// if (v1 < 30) goto loop
ICmpInst *LoopStrengthReduce::ChangeCompareStride(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse,
const SCEVHandle* &CondStride) {
if (StrideOrder.size() < 2 ||
IVUsesByStride[*CondStride].Users.size() != 1)
return Cond;
const SCEVConstant *SC = dyn_cast<SCEVConstant>(*CondStride);
if (!SC) return Cond;
ConstantInt *C = dyn_cast<ConstantInt>(Cond->getOperand(1));
if (!C) return Cond;
ICmpInst::Predicate Predicate = Cond->getPredicate();
int64_t CmpSSInt = SC->getValue()->getSExtValue();
int64_t CmpVal = C->getValue().getSExtValue();
unsigned BitWidth = C->getValue().getBitWidth();
uint64_t SignBit = 1ULL << (BitWidth-1);
const Type *CmpTy = C->getType();
const Type *NewCmpTy = NULL;
unsigned TyBits = CmpTy->getPrimitiveSizeInBits();
unsigned NewTyBits = 0;
int64_t NewCmpVal = CmpVal;
SCEVHandle *NewStride = NULL;
Value *NewIncV = NULL;
int64_t Scale = 1;
// Check stride constant and the comparision constant signs to detect
// overflow.
if ((CmpVal & SignBit) != (CmpSSInt & SignBit))
return Cond;
// Look for a suitable stride / iv as replacement.
std::stable_sort(StrideOrder.begin(), StrideOrder.end(), StrideCompare());
for (unsigned i = 0, e = StrideOrder.size(); i != e; ++i) {
std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI =
IVUsesByStride.find(StrideOrder[i]);
if (!isa<SCEVConstant>(SI->first))
continue;
int64_t SSInt = cast<SCEVConstant>(SI->first)->getValue()->getSExtValue();
if (abs(SSInt) <= abs(CmpSSInt) || (SSInt % CmpSSInt) != 0)
continue;
Scale = SSInt / CmpSSInt;
NewCmpVal = CmpVal * Scale;
APInt Mul = APInt(BitWidth, NewCmpVal);
// Check for overflow.
if (Mul.getSExtValue() != NewCmpVal) {
NewCmpVal = CmpVal;
continue;
}
// Watch out for overflow.
if (ICmpInst::isSignedPredicate(Predicate) &&
(CmpVal & SignBit) != (NewCmpVal & SignBit))
NewCmpVal = CmpVal;
if (NewCmpVal != CmpVal) {
// Pick the best iv to use trying to avoid a cast.
NewIncV = NULL;
for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(),
E = SI->second.Users.end(); UI != E; ++UI) {
NewIncV = UI->OperandValToReplace;
if (NewIncV->getType() == CmpTy)
break;
}
if (!NewIncV) {
NewCmpVal = CmpVal;
continue;
}
NewCmpTy = NewIncV->getType();
NewTyBits = isa<PointerType>(NewCmpTy)
? UIntPtrTy->getPrimitiveSizeInBits()
: NewCmpTy->getPrimitiveSizeInBits();
if (RequiresTypeConversion(NewCmpTy, CmpTy)) {
// Check if it is possible to rewrite it using
// an iv / stride of a smaller integer type.
bool TruncOk = false;
if (NewCmpTy->isInteger()) {
unsigned Bits = NewTyBits;
if (ICmpInst::isSignedPredicate(Predicate))
--Bits;
uint64_t Mask = (1ULL << Bits) - 1;
if (((uint64_t)NewCmpVal & Mask) == (uint64_t)NewCmpVal)
TruncOk = true;
}
if (!TruncOk) {
NewCmpVal = CmpVal;
continue;
}
}
// Don't rewrite if use offset is non-constant and the new type is
// of a different type.
// FIXME: too conservative?
if (NewTyBits != TyBits && !isa<SCEVConstant>(CondUse->Offset)) {
NewCmpVal = CmpVal;
continue;
}
bool AllUsesAreAddresses = true;
bool AllUsesAreOutsideLoop = true;
std::vector<BasedUser> UsersToProcess;
SCEVHandle CommonExprs = CollectIVUsers(SI->first, SI->second, L,
AllUsesAreAddresses,
AllUsesAreOutsideLoop,
UsersToProcess);
// Avoid rewriting the compare instruction with an iv of new stride
// if it's likely the new stride uses will be rewritten using the
if (AllUsesAreAddresses &&
ValidStride(!CommonExprs->isZero(), Scale, UsersToProcess)) {
NewCmpVal = CmpVal;
continue;
}
// If scale is negative, use swapped predicate unless it's testing
// for equality.
if (Scale < 0 && !Cond->isEquality())
Predicate = ICmpInst::getSwappedPredicate(Predicate);
NewStride = &StrideOrder[i];
break;
}
}
// Forgo this transformation if it the increment happens to be
// unfortunately positioned after the condition, and the condition
// has multiple uses which prevent it from being moved immediately
// before the branch. See
// test/Transforms/LoopStrengthReduce/change-compare-stride-trickiness-*.ll
// for an example of this situation.
if (!Cond->hasOneUse()) {
for (BasicBlock::iterator I = Cond, E = Cond->getParent()->end();
I != E; ++I)
if (I == NewIncV)
return Cond;
}
if (NewCmpVal != CmpVal) {
// Create a new compare instruction using new stride / iv.
ICmpInst *OldCond = Cond;
Value *RHS;
if (!isa<PointerType>(NewCmpTy))
RHS = ConstantInt::get(NewCmpTy, NewCmpVal);
else {
RHS = ConstantInt::get(UIntPtrTy, NewCmpVal);
RHS = SCEVExpander::InsertCastOfTo(Instruction::IntToPtr, RHS, NewCmpTy);
}
// Insert new compare instruction.
Cond = new ICmpInst(Predicate, NewIncV, RHS,
L->getHeader()->getName() + ".termcond",
OldCond);
// Remove the old compare instruction. The old indvar is probably dead too.
DeadInsts.push_back(cast<Instruction>(CondUse->OperandValToReplace));
SE->deleteValueFromRecords(OldCond);
OldCond->replaceAllUsesWith(Cond);
OldCond->eraseFromParent();
IVUsesByStride[*CondStride].Users.pop_back();
SCEVHandle NewOffset = TyBits == NewTyBits
? SE->getMulExpr(CondUse->Offset,
SE->getConstant(ConstantInt::get(CmpTy, Scale)))
: SE->getConstant(ConstantInt::get(NewCmpTy,
cast<SCEVConstant>(CondUse->Offset)->getValue()->getSExtValue()*Scale));
IVUsesByStride[*NewStride].addUser(NewOffset, Cond, NewIncV);
CondUse = &IVUsesByStride[*NewStride].Users.back();
CondStride = NewStride;
++NumEliminated;
}
return Cond;
}
/// OptimizeSMax - Rewrite the loop's terminating condition if it uses
/// an smax computation.
///
/// This is a narrow solution to a specific, but acute, problem. For loops
/// like this:
///
/// i = 0;
/// do {
/// p[i] = 0.0;
/// } while (++i < n);
///
/// where the comparison is signed, the trip count isn't just 'n', because
/// 'n' could be negative. And unfortunately this can come up even for loops
/// where the user didn't use a C do-while loop. For example, seemingly
/// well-behaved top-test loops will commonly be lowered like this:
//
/// if (n > 0) {
/// i = 0;
/// do {
/// p[i] = 0.0;
/// } while (++i < n);
/// }
///
/// and then it's possible for subsequent optimization to obscure the if
/// test in such a way that indvars can't find it.
///
/// When indvars can't find the if test in loops like this, it creates a
/// signed-max expression, which allows it to give the loop a canonical
/// induction variable:
///
/// i = 0;
/// smax = n < 1 ? 1 : n;
/// do {
/// p[i] = 0.0;
/// } while (++i != smax);
///
/// Canonical induction variables are necessary because the loop passes
/// are designed around them. The most obvious example of this is the
/// LoopInfo analysis, which doesn't remember trip count values. It
/// expects to be able to rediscover the trip count each time it is
/// needed, and it does this using a simple analyis that only succeeds if
/// the loop has a canonical induction variable.
///
/// However, when it comes time to generate code, the maximum operation
/// can be quite costly, especially if it's inside of an outer loop.
///
/// This function solves this problem by detecting this type of loop and
/// rewriting their conditions from ICMP_NE back to ICMP_SLT, and deleting
/// the instructions for the maximum computation.
///
ICmpInst *LoopStrengthReduce::OptimizeSMax(Loop *L, ICmpInst *Cond,
IVStrideUse* &CondUse) {
// Check that the loop matches the pattern we're looking for.
if (Cond->getPredicate() != CmpInst::ICMP_EQ &&
Cond->getPredicate() != CmpInst::ICMP_NE)
return Cond;
SelectInst *Sel = dyn_cast<SelectInst>(Cond->getOperand(1));
if (!Sel || !Sel->hasOneUse()) return Cond;
SCEVHandle IterationCount = SE->getIterationCount(L);
if (isa<SCEVCouldNotCompute>(IterationCount))
return Cond;
SCEVHandle One = SE->getIntegerSCEV(1, IterationCount->getType());
// Adjust for an annoying getIterationCount quirk.
IterationCount = SE->getAddExpr(IterationCount, One);
// Check for a max calculation that matches the pattern.
SCEVSMaxExpr *SMax = dyn_cast<SCEVSMaxExpr>(IterationCount);
if (!SMax || SMax != SE->getSCEV(Sel)) return Cond;
SCEVHandle SMaxLHS = SMax->getOperand(0);
SCEVHandle SMaxRHS = SMax->getOperand(1);
if (!SMaxLHS || SMaxLHS != One) return Cond;
// Check the relevant induction variable for conformance to
// the pattern.
SCEVHandle IV = SE->getSCEV(Cond->getOperand(0));
SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(IV);
if (!AR || !AR->isAffine() ||
AR->getStart() != One ||
AR->getStepRecurrence(*SE) != One)
return Cond;
// Check the right operand of the select, and remember it, as it will
// be used in the new comparison instruction.
Value *NewRHS = 0;
if (SE->getSCEV(Sel->getOperand(1)) == SMaxRHS)
NewRHS = Sel->getOperand(1);
else if (SE->getSCEV(Sel->getOperand(2)) == SMaxRHS)
NewRHS = Sel->getOperand(2);
if (!NewRHS) return Cond;
// Ok, everything looks ok to change the condition into an SLT or SGE and
// delete the max calculation.
ICmpInst *NewCond =
new ICmpInst(Cond->getPredicate() == CmpInst::ICMP_NE ?
CmpInst::ICMP_SLT :
CmpInst::ICMP_SGE,
Cond->getOperand(0), NewRHS, "scmp", Cond);
// Delete the max calculation instructions.
SE->deleteValueFromRecords(Cond);
Cond->replaceAllUsesWith(NewCond);
Cond->eraseFromParent();
Instruction *Cmp = cast<Instruction>(Sel->getOperand(0));
SE->deleteValueFromRecords(Sel);
Sel->eraseFromParent();
if (Cmp->use_empty()) {
SE->deleteValueFromRecords(Cmp);
Cmp->eraseFromParent();
}
CondUse->User = NewCond;
return NewCond;
}
/// OptimizeShadowIV - If IV is used in a int-to-float cast
/// inside the loop then try to eliminate the cast opeation.
void LoopStrengthReduce::OptimizeShadowIV(Loop *L) {
SCEVHandle IterationCount = SE->getIterationCount(L);
if (isa<SCEVCouldNotCompute>(IterationCount))
return;
for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e;
++Stride) {
std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI =
IVUsesByStride.find(StrideOrder[Stride]);
assert(SI != IVUsesByStride.end() && "Stride doesn't exist!");
if (!isa<SCEVConstant>(SI->first))
continue;
for (std::vector<IVStrideUse>::iterator UI = SI->second.Users.begin(),
E = SI->second.Users.end(); UI != E; /* empty */) {
std::vector<IVStrideUse>::iterator CandidateUI = UI;
++UI;
Instruction *ShadowUse = CandidateUI->User;
const Type *DestTy = NULL;
/* If shadow use is a int->float cast then insert a second IV
to eliminate this cast.
for (unsigned i = 0; i < n; ++i)
foo((double)i);
is transformed into
double d = 0.0;
for (unsigned i = 0; i < n; ++i, ++d)
foo(d);
*/
if (UIToFPInst *UCast = dyn_cast<UIToFPInst>(CandidateUI->User))
DestTy = UCast->getDestTy();
else if (SIToFPInst *SCast = dyn_cast<SIToFPInst>(CandidateUI->User))
DestTy = SCast->getDestTy();
if (!DestTy) continue;
if (TLI) {
/* If target does not support DestTy natively then do not apply
this transformation. */
MVT DVT = TLI->getValueType(DestTy);
if (!TLI->isTypeLegal(DVT)) continue;
}
PHINode *PH = dyn_cast<PHINode>(ShadowUse->getOperand(0));
if (!PH) continue;
if (PH->getNumIncomingValues() != 2) continue;
const Type *SrcTy = PH->getType();
int Mantissa = DestTy->getFPMantissaWidth();
if (Mantissa == -1) continue;
if ((int)TD->getTypeSizeInBits(SrcTy) > Mantissa)
continue;
unsigned Entry, Latch;
if (PH->getIncomingBlock(0) == L->getLoopPreheader()) {
Entry = 0;
Latch = 1;
} else {
Entry = 1;
Latch = 0;
}
ConstantInt *Init = dyn_cast<ConstantInt>(PH->getIncomingValue(Entry));
if (!Init) continue;
ConstantFP *NewInit = ConstantFP::get(DestTy, Init->getZExtValue());
BinaryOperator *Incr =
dyn_cast<BinaryOperator>(PH->getIncomingValue(Latch));
if (!Incr) continue;
if (Incr->getOpcode() != Instruction::Add
&& Incr->getOpcode() != Instruction::Sub)
continue;
/* Initialize new IV, double d = 0.0 in above example. */
ConstantInt *C = NULL;
if (Incr->getOperand(0) == PH)
C = dyn_cast<ConstantInt>(Incr->getOperand(1));
else if (Incr->getOperand(1) == PH)
C = dyn_cast<ConstantInt>(Incr->getOperand(0));
else
continue;
if (!C) continue;
/* Add new PHINode. */
PHINode *NewPH = PHINode::Create(DestTy, "IV.S.", PH);
/* create new increment. '++d' in above example. */
ConstantFP *CFP = ConstantFP::get(DestTy, C->getZExtValue());
BinaryOperator *NewIncr =
BinaryOperator::Create(Incr->getOpcode(),
NewPH, CFP, "IV.S.next.", Incr);
NewPH->addIncoming(NewInit, PH->getIncomingBlock(Entry));
NewPH->addIncoming(NewIncr, PH->getIncomingBlock(Latch));
/* Remove cast operation */
SE->deleteValueFromRecords(ShadowUse);
ShadowUse->replaceAllUsesWith(NewPH);
ShadowUse->eraseFromParent();
SI->second.Users.erase(CandidateUI);
NumShadow++;
break;
}
}
}
// OptimizeIndvars - Now that IVUsesByStride is set up with all of the indvar
// uses in the loop, look to see if we can eliminate some, in favor of using
// common indvars for the different uses.
void LoopStrengthReduce::OptimizeIndvars(Loop *L) {
// TODO: implement optzns here.
OptimizeShadowIV(L);
// Finally, get the terminating condition for the loop if possible. If we
// can, we want to change it to use a post-incremented version of its
// induction variable, to allow coalescing the live ranges for the IV into
// one register value.
PHINode *SomePHI = cast<PHINode>(L->getHeader()->begin());
BasicBlock *Preheader = L->getLoopPreheader();
BasicBlock *LatchBlock =
SomePHI->getIncomingBlock(SomePHI->getIncomingBlock(0) == Preheader);
BranchInst *TermBr = dyn_cast<BranchInst>(LatchBlock->getTerminator());
if (!TermBr || TermBr->isUnconditional() ||
!isa<ICmpInst>(TermBr->getCondition()))
return;
ICmpInst *Cond = cast<ICmpInst>(TermBr->getCondition());
// Search IVUsesByStride to find Cond's IVUse if there is one.
IVStrideUse *CondUse = 0;
const SCEVHandle *CondStride = 0;
if (!FindIVUserForCond(Cond, CondUse, CondStride))
return; // setcc doesn't use the IV.
// If the trip count is computed in terms of an smax (due to ScalarEvolution
// being unable to find a sufficient guard, for example), change the loop
// comparison to use SLT instead of NE.
Cond = OptimizeSMax(L, Cond, CondUse);
// If possible, change stride and operands of the compare instruction to
// eliminate one stride.
Cond = ChangeCompareStride(L, Cond, CondUse, CondStride);
// It's possible for the setcc instruction to be anywhere in the loop, and
// possible for it to have multiple users. If it is not immediately before
// the latch block branch, move it.
if (&*++BasicBlock::iterator(Cond) != (Instruction*)TermBr) {
if (Cond->hasOneUse()) { // Condition has a single use, just move it.
Cond->moveBefore(TermBr);
} else {
// Otherwise, clone the terminating condition and insert into the loopend.
Cond = cast<ICmpInst>(Cond->clone());
Cond->setName(L->getHeader()->getName() + ".termcond");
LatchBlock->getInstList().insert(TermBr, Cond);
// Clone the IVUse, as the old use still exists!
IVUsesByStride[*CondStride].addUser(CondUse->Offset, Cond,
CondUse->OperandValToReplace);
CondUse = &IVUsesByStride[*CondStride].Users.back();
}
}
// If we get to here, we know that we can transform the setcc instruction to
// use the post-incremented version of the IV, allowing us to coalesce the
// live ranges for the IV correctly.
CondUse->Offset = SE->getMinusSCEV(CondUse->Offset, *CondStride);
CondUse->isUseOfPostIncrementedValue = true;
Changed = true;
}
bool LoopStrengthReduce::runOnLoop(Loop *L, LPPassManager &LPM) {
LI = &getAnalysis<LoopInfo>();
DT = &getAnalysis<DominatorTree>();
SE = &getAnalysis<ScalarEvolution>();
TD = &getAnalysis<TargetData>();
UIntPtrTy = TD->getIntPtrType();
Changed = false;
// Find all uses of induction variables in this loop, and categorize
// them by stride. Start by finding all of the PHI nodes in the header for
// this loop. If they are induction variables, inspect their uses.
SmallPtrSet<Instruction*,16> Processed; // Don't reprocess instructions.
for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ++I)
AddUsersIfInteresting(I, L, Processed);
if (!IVUsesByStride.empty()) {
// Optimize induction variables. Some indvar uses can be transformed to use
// strides that will be needed for other purposes. A common example of this
// is the exit test for the loop, which can often be rewritten to use the
// computation of some other indvar to decide when to terminate the loop.
OptimizeIndvars(L);
// FIXME: We can widen subreg IV's here for RISC targets. e.g. instead of
// doing computation in byte values, promote to 32-bit values if safe.
// FIXME: Attempt to reuse values across multiple IV's. In particular, we
// could have something like "for(i) { foo(i*8); bar(i*16) }", which should
// be codegened as "for (j = 0;; j+=8) { foo(j); bar(j+j); }" on X86/PPC.
// Need to be careful that IV's are all the same type. Only works for
// intptr_t indvars.
// If we only have one stride, we can more aggressively eliminate some
// things.
bool HasOneStride = IVUsesByStride.size() == 1;
#ifndef NDEBUG
DOUT << "\nLSR on ";
DEBUG(L->dump());
#endif
// IVsByStride keeps IVs for one particular loop.
assert(IVsByStride.empty() && "Stale entries in IVsByStride?");
// Sort the StrideOrder so we process larger strides first.
std::stable_sort(StrideOrder.begin(), StrideOrder.end(), StrideCompare());
// Note: this processes each stride/type pair individually. All users
// passed into StrengthReduceStridedIVUsers have the same type AND stride.
// Also, note that we iterate over IVUsesByStride indirectly by using
// StrideOrder. This extra layer of indirection makes the ordering of
// strides deterministic - not dependent on map order.
for (unsigned Stride = 0, e = StrideOrder.size(); Stride != e; ++Stride) {
std::map<SCEVHandle, IVUsersOfOneStride>::iterator SI =
IVUsesByStride.find(StrideOrder[Stride]);
assert(SI != IVUsesByStride.end() && "Stride doesn't exist!");
StrengthReduceStridedIVUsers(SI->first, SI->second, L, HasOneStride);
}
}
// We're done analyzing this loop; release all the state we built up for it.
CastedPointers.clear();
IVUsesByStride.clear();
IVsByStride.clear();
StrideOrder.clear();
for (unsigned i=0; i<GEPlist.size(); i++)
SE->deleteValueFromRecords(GEPlist[i]);
GEPlist.clear();
// Clean up after ourselves
if (!DeadInsts.empty()) {
DeleteTriviallyDeadInstructions();
BasicBlock::iterator I = L->getHeader()->begin();
while (PHINode *PN = dyn_cast<PHINode>(I++)) {
// At this point, we know that we have killed one or more IV users.
// It is worth checking to see if the cannonical indvar is also
// dead, so that we can remove it as well.
//
// We can remove a PHI if it is on a cycle in the def-use graph
// where each node in the cycle has degree one, i.e. only one use,
// and is an instruction with no side effects.
//
// FIXME: this needs to eliminate an induction variable even if it's being
// compared against some value to decide loop termination.
if (!PN->hasOneUse())
continue;
SmallPtrSet<PHINode *, 4> PHIs;
for (Instruction *J = dyn_cast<Instruction>(*PN->use_begin());
J && J->hasOneUse() && !J->mayWriteToMemory();
J = dyn_cast<Instruction>(*J->use_begin())) {
// If we find the original PHI, we've discovered a cycle.
if (J == PN) {
// Break the cycle and mark the PHI for deletion.
SE->deleteValueFromRecords(PN);
PN->replaceAllUsesWith(UndefValue::get(PN->getType()));
DeadInsts.push_back(PN);
Changed = true;
break;
}
// If we find a PHI more than once, we're on a cycle that
// won't prove fruitful.
if (isa<PHINode>(J) && !PHIs.insert(cast<PHINode>(J)))
break;
}
}
DeleteTriviallyDeadInstructions();
}
return Changed;
}
Reference in New Issue View Git Blame Copy Permalink