llvm-6502/lib/Target/X86/X86ISelLowering.h
Eric Christopher a01bc6a59f Remove an argument-less call to getSubtargetImpl from TargetLoweringBase.
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230583 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-26 00:00:24 +00:00

1078 lines
42 KiB
C++

//===-- X86ISelLowering.h - X86 DAG Lowering Interface ----------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the interfaces that X86 uses to lower LLVM code into a
// selection DAG.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_LIB_TARGET_X86_X86ISELLOWERING_H
#define LLVM_LIB_TARGET_X86_X86ISELLOWERING_H
#include "llvm/CodeGen/CallingConvLower.h"
#include "llvm/CodeGen/SelectionDAG.h"
#include "llvm/Target/TargetLowering.h"
#include "llvm/Target/TargetOptions.h"
namespace llvm {
class X86Subtarget;
class X86TargetMachine;
namespace X86ISD {
// X86 Specific DAG Nodes
enum NodeType {
// Start the numbering where the builtin ops leave off.
FIRST_NUMBER = ISD::BUILTIN_OP_END,
/// BSF - Bit scan forward.
/// BSR - Bit scan reverse.
BSF,
BSR,
/// SHLD, SHRD - Double shift instructions. These correspond to
/// X86::SHLDxx and X86::SHRDxx instructions.
SHLD,
SHRD,
/// FAND - Bitwise logical AND of floating point values. This corresponds
/// to X86::ANDPS or X86::ANDPD.
FAND,
/// FOR - Bitwise logical OR of floating point values. This corresponds
/// to X86::ORPS or X86::ORPD.
FOR,
/// FXOR - Bitwise logical XOR of floating point values. This corresponds
/// to X86::XORPS or X86::XORPD.
FXOR,
/// FANDN - Bitwise logical ANDNOT of floating point values. This
/// corresponds to X86::ANDNPS or X86::ANDNPD.
FANDN,
/// FSRL - Bitwise logical right shift of floating point values. These
/// corresponds to X86::PSRLDQ.
FSRL,
/// CALL - These operations represent an abstract X86 call
/// instruction, which includes a bunch of information. In particular the
/// operands of these node are:
///
/// #0 - The incoming token chain
/// #1 - The callee
/// #2 - The number of arg bytes the caller pushes on the stack.
/// #3 - The number of arg bytes the callee pops off the stack.
/// #4 - The value to pass in AL/AX/EAX (optional)
/// #5 - The value to pass in DL/DX/EDX (optional)
///
/// The result values of these nodes are:
///
/// #0 - The outgoing token chain
/// #1 - The first register result value (optional)
/// #2 - The second register result value (optional)
///
CALL,
/// RDTSC_DAG - This operation implements the lowering for
/// readcyclecounter
RDTSC_DAG,
/// X86 Read Time-Stamp Counter and Processor ID.
RDTSCP_DAG,
/// X86 Read Performance Monitoring Counters.
RDPMC_DAG,
/// X86 compare and logical compare instructions.
CMP, COMI, UCOMI,
/// X86 bit-test instructions.
BT,
/// X86 SetCC. Operand 0 is condition code, and operand 1 is the EFLAGS
/// operand, usually produced by a CMP instruction.
SETCC,
/// X86 Select
SELECT,
// Same as SETCC except it's materialized with a sbb and the value is all
// one's or all zero's.
SETCC_CARRY, // R = carry_bit ? ~0 : 0
/// X86 FP SETCC, implemented with CMP{cc}SS/CMP{cc}SD.
/// Operands are two FP values to compare; result is a mask of
/// 0s or 1s. Generally DTRT for C/C++ with NaNs.
FSETCC,
/// X86 MOVMSK{pd|ps}, extracts sign bits of two or four FP values,
/// result in an integer GPR. Needs masking for scalar result.
FGETSIGNx86,
/// X86 conditional moves. Operand 0 and operand 1 are the two values
/// to select from. Operand 2 is the condition code, and operand 3 is the
/// flag operand produced by a CMP or TEST instruction. It also writes a
/// flag result.
CMOV,
/// X86 conditional branches. Operand 0 is the chain operand, operand 1
/// is the block to branch if condition is true, operand 2 is the
/// condition code, and operand 3 is the flag operand produced by a CMP
/// or TEST instruction.
BRCOND,
/// Return with a flag operand. Operand 0 is the chain operand, operand
/// 1 is the number of bytes of stack to pop.
RET_FLAG,
/// REP_STOS - Repeat fill, corresponds to X86::REP_STOSx.
REP_STOS,
/// REP_MOVS - Repeat move, corresponds to X86::REP_MOVSx.
REP_MOVS,
/// GlobalBaseReg - On Darwin, this node represents the result of the popl
/// at function entry, used for PIC code.
GlobalBaseReg,
/// Wrapper - A wrapper node for TargetConstantPool,
/// TargetExternalSymbol, and TargetGlobalAddress.
Wrapper,
/// WrapperRIP - Special wrapper used under X86-64 PIC mode for RIP
/// relative displacements.
WrapperRIP,
/// MOVDQ2Q - Copies a 64-bit value from the low word of an XMM vector
/// to an MMX vector. If you think this is too close to the previous
/// mnemonic, so do I; blame Intel.
MOVDQ2Q,
/// MMX_MOVD2W - Copies a 32-bit value from the low word of a MMX
/// vector to a GPR.
MMX_MOVD2W,
/// MMX_MOVW2D - Copies a GPR into the low 32-bit word of a MMX vector
/// and zero out the high word.
MMX_MOVW2D,
/// PEXTRB - Extract an 8-bit value from a vector and zero extend it to
/// i32, corresponds to X86::PEXTRB.
PEXTRB,
/// PEXTRW - Extract a 16-bit value from a vector and zero extend it to
/// i32, corresponds to X86::PEXTRW.
PEXTRW,
/// INSERTPS - Insert any element of a 4 x float vector into any element
/// of a destination 4 x floatvector.
INSERTPS,
/// PINSRB - Insert the lower 8-bits of a 32-bit value to a vector,
/// corresponds to X86::PINSRB.
PINSRB,
/// PINSRW - Insert the lower 16-bits of a 32-bit value to a vector,
/// corresponds to X86::PINSRW.
PINSRW, MMX_PINSRW,
/// PSHUFB - Shuffle 16 8-bit values within a vector.
PSHUFB,
/// ANDNP - Bitwise Logical AND NOT of Packed FP values.
ANDNP,
/// PSIGN - Copy integer sign.
PSIGN,
/// BLENDI - Blend where the selector is an immediate.
BLENDI,
/// SHRUNKBLEND - Blend where the condition has been shrunk.
/// This is used to emphasize that the condition mask is
/// no more valid for generic VSELECT optimizations.
SHRUNKBLEND,
/// ADDSUB - Combined add and sub on an FP vector.
ADDSUB,
// FADD, FSUB, FMUL, FDIV, FMIN, FMAX - FP vector ops with rounding mode.
FADD_RND,
FSUB_RND,
FMUL_RND,
FDIV_RND,
// SUBUS - Integer sub with unsigned saturation.
SUBUS,
/// HADD - Integer horizontal add.
HADD,
/// HSUB - Integer horizontal sub.
HSUB,
/// FHADD - Floating point horizontal add.
FHADD,
/// FHSUB - Floating point horizontal sub.
FHSUB,
/// UMAX, UMIN - Unsigned integer max and min.
UMAX, UMIN,
/// SMAX, SMIN - Signed integer max and min.
SMAX, SMIN,
/// FMAX, FMIN - Floating point max and min.
///
FMAX, FMIN,
/// FMAXC, FMINC - Commutative FMIN and FMAX.
FMAXC, FMINC,
/// FRSQRT, FRCP - Floating point reciprocal-sqrt and reciprocal
/// approximation. Note that these typically require refinement
/// in order to obtain suitable precision.
FRSQRT, FRCP,
// TLSADDR - Thread Local Storage.
TLSADDR,
// TLSBASEADDR - Thread Local Storage. A call to get the start address
// of the TLS block for the current module.
TLSBASEADDR,
// TLSCALL - Thread Local Storage. When calling to an OS provided
// thunk at the address from an earlier relocation.
TLSCALL,
// EH_RETURN - Exception Handling helpers.
EH_RETURN,
// EH_SJLJ_SETJMP - SjLj exception handling setjmp.
EH_SJLJ_SETJMP,
// EH_SJLJ_LONGJMP - SjLj exception handling longjmp.
EH_SJLJ_LONGJMP,
/// TC_RETURN - Tail call return. See X86TargetLowering::LowerCall for
/// the list of operands.
TC_RETURN,
// VZEXT_MOVL - Vector move to low scalar and zero higher vector elements.
VZEXT_MOVL,
// VZEXT - Vector integer zero-extend.
VZEXT,
// VSEXT - Vector integer signed-extend.
VSEXT,
// VTRUNC - Vector integer truncate.
VTRUNC,
// VTRUNC - Vector integer truncate with mask.
VTRUNCM,
// VFPEXT - Vector FP extend.
VFPEXT,
// VFPROUND - Vector FP round.
VFPROUND,
// VSHL, VSRL - 128-bit vector logical left / right shift
VSHLDQ, VSRLDQ,
// VSHL, VSRL, VSRA - Vector shift elements
VSHL, VSRL, VSRA,
// VSHLI, VSRLI, VSRAI - Vector shift elements by immediate
VSHLI, VSRLI, VSRAI,
// CMPP - Vector packed double/float comparison.
CMPP,
// PCMP* - Vector integer comparisons.
PCMPEQ, PCMPGT,
// PCMP*M - Vector integer comparisons, the result is in a mask vector.
PCMPEQM, PCMPGTM,
/// CMPM, CMPMU - Vector comparison generating mask bits for fp and
/// integer signed and unsigned data types.
CMPM,
CMPMU,
// ADD, SUB, SMUL, etc. - Arithmetic operations with FLAGS results.
ADD, SUB, ADC, SBB, SMUL,
INC, DEC, OR, XOR, AND,
BEXTR, // BEXTR - Bit field extract
UMUL, // LOW, HI, FLAGS = umul LHS, RHS
// 8-bit SMUL/UMUL - AX, FLAGS = smul8/umul8 AL, RHS
SMUL8, UMUL8,
// 8-bit divrem that zero-extend the high result (AH).
UDIVREM8_ZEXT_HREG,
SDIVREM8_SEXT_HREG,
// MUL_IMM - X86 specific multiply by immediate.
MUL_IMM,
// PTEST - Vector bitwise comparisons.
PTEST,
// TESTP - Vector packed fp sign bitwise comparisons.
TESTP,
// TESTM, TESTNM - Vector "test" in AVX-512, the result is in a mask vector.
TESTM,
TESTNM,
// OR/AND test for masks
KORTEST,
// Several flavors of instructions with vector shuffle behaviors.
PACKSS,
PACKUS,
// Intra-lane alignr
PALIGNR,
// AVX512 inter-lane alignr
VALIGN,
PSHUFD,
PSHUFHW,
PSHUFLW,
SHUFP,
MOVDDUP,
MOVSHDUP,
MOVSLDUP,
MOVLHPS,
MOVLHPD,
MOVHLPS,
MOVLPS,
MOVLPD,
MOVSD,
MOVSS,
UNPCKL,
UNPCKH,
VPERMILPV,
VPERMILPI,
VPERMV,
VPERMV3,
VPERMIV3,
VPERMI,
VPERM2X128,
VBROADCAST,
// masked broadcast
VBROADCASTM,
// Insert/Extract vector element
VINSERT,
VEXTRACT,
// Vector multiply packed unsigned doubleword integers
PMULUDQ,
// Vector multiply packed signed doubleword integers
PMULDQ,
// FMA nodes
FMADD,
FNMADD,
FMSUB,
FNMSUB,
FMADDSUB,
FMSUBADD,
// FMA with rounding mode
FMADD_RND,
FNMADD_RND,
FMSUB_RND,
FNMSUB_RND,
FMADDSUB_RND,
FMSUBADD_RND,
RNDSCALE,
// Compress and expand
COMPRESS,
EXPAND,
// Save xmm argument registers to the stack, according to %al. An operator
// is needed so that this can be expanded with control flow.
VASTART_SAVE_XMM_REGS,
// Windows's _chkstk call to do stack probing.
WIN_ALLOCA,
// For allocating variable amounts of stack space when using
// segmented stacks. Check if the current stacklet has enough space, and
// falls back to heap allocation if not.
SEG_ALLOCA,
// Windows's _ftol2 runtime routine to do fptoui.
WIN_FTOL,
// Memory barrier
MEMBARRIER,
MFENCE,
SFENCE,
LFENCE,
// Store FP status word into i16 register.
FNSTSW16r,
// Store contents of %ah into %eflags.
SAHF,
// Get a random integer and indicate whether it is valid in CF.
RDRAND,
// Get a NIST SP800-90B & C compliant random integer and
// indicate whether it is valid in CF.
RDSEED,
PCMPISTRI,
PCMPESTRI,
// Test if in transactional execution.
XTEST,
// ERI instructions
RSQRT28, RCP28, EXP2,
// Compare and swap.
LCMPXCHG_DAG = ISD::FIRST_TARGET_MEMORY_OPCODE,
LCMPXCHG8_DAG,
LCMPXCHG16_DAG,
// Load, scalar_to_vector, and zero extend.
VZEXT_LOAD,
// Store FP control world into i16 memory.
FNSTCW16m,
/// This instruction implements FP_TO_SINT with the
/// integer destination in memory and a FP reg source. This corresponds
/// to the X86::FIST*m instructions and the rounding mode change stuff. It
/// has two inputs (token chain and address) and two outputs (int value
/// and token chain).
FP_TO_INT16_IN_MEM,
FP_TO_INT32_IN_MEM,
FP_TO_INT64_IN_MEM,
/// This instruction implements SINT_TO_FP with the
/// integer source in memory and FP reg result. This corresponds to the
/// X86::FILD*m instructions. It has three inputs (token chain, address,
/// and source type) and two outputs (FP value and token chain). FILD_FLAG
/// also produces a flag).
FILD,
FILD_FLAG,
/// This instruction implements an extending load to FP stack slots.
/// This corresponds to the X86::FLD32m / X86::FLD64m. It takes a chain
/// operand, ptr to load from, and a ValueType node indicating the type
/// to load to.
FLD,
/// This instruction implements a truncating store to FP stack
/// slots. This corresponds to the X86::FST32m / X86::FST64m. It takes a
/// chain operand, value to store, address, and a ValueType to store it
/// as.
FST,
/// This instruction grabs the address of the next argument
/// from a va_list. (reads and modifies the va_list in memory)
VAARG_64
// WARNING: Do not add anything in the end unless you want the node to
// have memop! In fact, starting from ATOMADD64_DAG all opcodes will be
// thought as target memory ops!
};
}
/// Define some predicates that are used for node matching.
namespace X86 {
/// Return true if the specified
/// EXTRACT_SUBVECTOR operand specifies a vector extract that is
/// suitable for input to VEXTRACTF128, VEXTRACTI128 instructions.
bool isVEXTRACT128Index(SDNode *N);
/// Return true if the specified
/// INSERT_SUBVECTOR operand specifies a subvector insert that is
/// suitable for input to VINSERTF128, VINSERTI128 instructions.
bool isVINSERT128Index(SDNode *N);
/// Return true if the specified
/// EXTRACT_SUBVECTOR operand specifies a vector extract that is
/// suitable for input to VEXTRACTF64X4, VEXTRACTI64X4 instructions.
bool isVEXTRACT256Index(SDNode *N);
/// Return true if the specified
/// INSERT_SUBVECTOR operand specifies a subvector insert that is
/// suitable for input to VINSERTF64X4, VINSERTI64X4 instructions.
bool isVINSERT256Index(SDNode *N);
/// Return the appropriate
/// immediate to extract the specified EXTRACT_SUBVECTOR index
/// with VEXTRACTF128, VEXTRACTI128 instructions.
unsigned getExtractVEXTRACT128Immediate(SDNode *N);
/// Return the appropriate
/// immediate to insert at the specified INSERT_SUBVECTOR index
/// with VINSERTF128, VINSERT128 instructions.
unsigned getInsertVINSERT128Immediate(SDNode *N);
/// Return the appropriate
/// immediate to extract the specified EXTRACT_SUBVECTOR index
/// with VEXTRACTF64X4, VEXTRACTI64x4 instructions.
unsigned getExtractVEXTRACT256Immediate(SDNode *N);
/// Return the appropriate
/// immediate to insert at the specified INSERT_SUBVECTOR index
/// with VINSERTF64x4, VINSERTI64x4 instructions.
unsigned getInsertVINSERT256Immediate(SDNode *N);
/// Returns true if Elt is a constant zero or floating point constant +0.0.
bool isZeroNode(SDValue Elt);
/// Returns true of the given offset can be
/// fit into displacement field of the instruction.
bool isOffsetSuitableForCodeModel(int64_t Offset, CodeModel::Model M,
bool hasSymbolicDisplacement = true);
/// Determines whether the callee is required to pop its
/// own arguments. Callee pop is necessary to support tail calls.
bool isCalleePop(CallingConv::ID CallingConv,
bool is64Bit, bool IsVarArg, bool TailCallOpt);
/// AVX512 static rounding constants. These need to match the values in
/// avx512fintrin.h.
enum STATIC_ROUNDING {
TO_NEAREST_INT = 0,
TO_NEG_INF = 1,
TO_POS_INF = 2,
TO_ZERO = 3,
CUR_DIRECTION = 4
};
}
//===--------------------------------------------------------------------===//
// X86 Implementation of the TargetLowering interface
class X86TargetLowering final : public TargetLowering {
public:
explicit X86TargetLowering(const X86TargetMachine &TM,
const X86Subtarget &STI);
unsigned getJumpTableEncoding() const override;
MVT getScalarShiftAmountTy(EVT LHSTy) const override { return MVT::i8; }
const MCExpr *
LowerCustomJumpTableEntry(const MachineJumpTableInfo *MJTI,
const MachineBasicBlock *MBB, unsigned uid,
MCContext &Ctx) const override;
/// Returns relocation base for the given PIC jumptable.
SDValue getPICJumpTableRelocBase(SDValue Table,
SelectionDAG &DAG) const override;
const MCExpr *
getPICJumpTableRelocBaseExpr(const MachineFunction *MF,
unsigned JTI, MCContext &Ctx) const override;
/// Return the desired alignment for ByVal aggregate
/// function arguments in the caller parameter area. For X86, aggregates
/// that contains are placed at 16-byte boundaries while the rest are at
/// 4-byte boundaries.
unsigned getByValTypeAlignment(Type *Ty) const override;
/// Returns the target specific optimal type for load
/// and store operations as a result of memset, memcpy, and memmove
/// lowering. If DstAlign is zero that means it's safe to destination
/// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
/// means there isn't a need to check it against alignment requirement,
/// probably because the source does not need to be loaded. If 'IsMemset' is
/// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
/// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
/// source is constant so it does not need to be loaded.
/// It returns EVT::Other if the type should be determined using generic
/// target-independent logic.
EVT getOptimalMemOpType(uint64_t Size, unsigned DstAlign, unsigned SrcAlign,
bool IsMemset, bool ZeroMemset, bool MemcpyStrSrc,
MachineFunction &MF) const override;
/// Returns true if it's safe to use load / store of the
/// specified type to expand memcpy / memset inline. This is mostly true
/// for all types except for some special cases. For example, on X86
/// targets without SSE2 f64 load / store are done with fldl / fstpl which
/// also does type conversion. Note the specified type doesn't have to be
/// legal as the hook is used before type legalization.
bool isSafeMemOpType(MVT VT) const override;
/// Returns true if the target allows
/// unaligned memory accesses. of the specified type. Returns whether it
/// is "fast" by reference in the second argument.
bool allowsMisalignedMemoryAccesses(EVT VT, unsigned AS, unsigned Align,
bool *Fast) const override;
/// Provide custom lowering hooks for some operations.
///
SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const override;
/// Replace the results of node with an illegal result
/// type with new values built out of custom code.
///
void ReplaceNodeResults(SDNode *N, SmallVectorImpl<SDValue>&Results,
SelectionDAG &DAG) const override;
SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const override;
/// Return true if the target has native support for
/// the specified value type and it is 'desirable' to use the type for the
/// given node type. e.g. On x86 i16 is legal, but undesirable since i16
/// instruction encodings are longer and some i16 instructions are slow.
bool isTypeDesirableForOp(unsigned Opc, EVT VT) const override;
/// Return true if the target has native support for the
/// specified value type and it is 'desirable' to use the type. e.g. On x86
/// i16 is legal, but undesirable since i16 instruction encodings are longer
/// and some i16 instructions are slow.
bool IsDesirableToPromoteOp(SDValue Op, EVT &PVT) const override;
MachineBasicBlock *
EmitInstrWithCustomInserter(MachineInstr *MI,
MachineBasicBlock *MBB) const override;
/// This method returns the name of a target specific DAG node.
const char *getTargetNodeName(unsigned Opcode) const override;
bool isCheapToSpeculateCttz() const override;
bool isCheapToSpeculateCtlz() const override;
/// Return the value type to use for ISD::SETCC.
EVT getSetCCResultType(LLVMContext &Context, EVT VT) const override;
/// Determine which of the bits specified in Mask are known to be either
/// zero or one and return them in the KnownZero/KnownOne bitsets.
void computeKnownBitsForTargetNode(const SDValue Op,
APInt &KnownZero,
APInt &KnownOne,
const SelectionDAG &DAG,
unsigned Depth = 0) const override;
/// Determine the number of bits in the operation that are sign bits.
unsigned ComputeNumSignBitsForTargetNode(SDValue Op,
const SelectionDAG &DAG,
unsigned Depth) const override;
bool isGAPlusOffset(SDNode *N, const GlobalValue* &GA,
int64_t &Offset) const override;
SDValue getReturnAddressFrameIndex(SelectionDAG &DAG) const;
bool ExpandInlineAsm(CallInst *CI) const override;
ConstraintType
getConstraintType(const std::string &Constraint) const override;
/// Examine constraint string and operand type and determine a weight value.
/// The operand object must already have been set up with the operand type.
ConstraintWeight
getSingleConstraintMatchWeight(AsmOperandInfo &info,
const char *constraint) const override;
const char *LowerXConstraint(EVT ConstraintVT) const override;
/// Lower the specified operand into the Ops vector. If it is invalid, don't
/// add anything to Ops. If hasMemory is true it means one of the asm
/// constraint of the inline asm instruction being processed is 'm'.
void LowerAsmOperandForConstraint(SDValue Op,
std::string &Constraint,
std::vector<SDValue> &Ops,
SelectionDAG &DAG) const override;
/// Given a physical register constraint
/// (e.g. {edx}), return the register number and the register class for the
/// register. This should only be used for C_Register constraints. On
/// error, this returns a register number of 0.
std::pair<unsigned, const TargetRegisterClass*>
getRegForInlineAsmConstraint(const std::string &Constraint,
MVT VT) const override;
/// Return true if the addressing mode represented
/// by AM is legal for this target, for a load/store of the specified type.
bool isLegalAddressingMode(const AddrMode &AM, Type *Ty) const override;
/// Return true if the specified immediate is legal
/// icmp immediate, that is the target has icmp instructions which can
/// compare a register against the immediate without having to materialize
/// the immediate into a register.
bool isLegalICmpImmediate(int64_t Imm) const override;
/// Return true if the specified immediate is legal
/// add immediate, that is the target has add instructions which can
/// add a register and the immediate without having to materialize
/// the immediate into a register.
bool isLegalAddImmediate(int64_t Imm) const override;
/// \brief Return the cost of the scaling factor used in the addressing
/// mode represented by AM for this target, for a load/store
/// of the specified type.
/// If the AM is supported, the return value must be >= 0.
/// If the AM is not supported, it returns a negative value.
int getScalingFactorCost(const AddrMode &AM, Type *Ty) const override;
bool isVectorShiftByScalarCheap(Type *Ty) const override;
/// Return true if it's free to truncate a value of
/// type Ty1 to type Ty2. e.g. On x86 it's free to truncate a i32 value in
/// register EAX to i16 by referencing its sub-register AX.
bool isTruncateFree(Type *Ty1, Type *Ty2) const override;
bool isTruncateFree(EVT VT1, EVT VT2) const override;
bool allowTruncateForTailCall(Type *Ty1, Type *Ty2) const override;
/// Return true if any actual instruction that defines a
/// value of type Ty1 implicit zero-extends the value to Ty2 in the result
/// register. This does not necessarily include registers defined in
/// unknown ways, such as incoming arguments, or copies from unknown
/// virtual registers. Also, if isTruncateFree(Ty2, Ty1) is true, this
/// does not necessarily apply to truncate instructions. e.g. on x86-64,
/// all instructions that define 32-bit values implicit zero-extend the
/// result out to 64 bits.
bool isZExtFree(Type *Ty1, Type *Ty2) const override;
bool isZExtFree(EVT VT1, EVT VT2) const override;
bool isZExtFree(SDValue Val, EVT VT2) const override;
/// Return true if folding a vector load into ExtVal (a sign, zero, or any
/// extend node) is profitable.
bool isVectorLoadExtDesirable(SDValue) const override;
/// Return true if an FMA operation is faster than a pair of fmul and fadd
/// instructions. fmuladd intrinsics will be expanded to FMAs when this
/// method returns true, otherwise fmuladd is expanded to fmul + fadd.
bool isFMAFasterThanFMulAndFAdd(EVT VT) const override;
/// Return true if it's profitable to narrow
/// operations of type VT1 to VT2. e.g. on x86, it's profitable to narrow
/// from i32 to i8 but not from i32 to i16.
bool isNarrowingProfitable(EVT VT1, EVT VT2) const override;
/// Returns true if the target can instruction select the
/// specified FP immediate natively. If false, the legalizer will
/// materialize the FP immediate as a load from a constant pool.
bool isFPImmLegal(const APFloat &Imm, EVT VT) const override;
/// Targets can use this to indicate that they only support *some*
/// VECTOR_SHUFFLE operations, those with specific masks. By default, if a
/// target supports the VECTOR_SHUFFLE node, all mask values are assumed to
/// be legal.
bool isShuffleMaskLegal(const SmallVectorImpl<int> &Mask,
EVT VT) const override;
/// Similar to isShuffleMaskLegal. This is used by Targets can use this to
/// indicate if there is a suitable VECTOR_SHUFFLE that can be used to
/// replace a VAND with a constant pool entry.
bool isVectorClearMaskLegal(const SmallVectorImpl<int> &Mask,
EVT VT) const override;
/// If true, then instruction selection should
/// seek to shrink the FP constant of the specified type to a smaller type
/// in order to save space and / or reduce runtime.
bool ShouldShrinkFPConstant(EVT VT) const override {
// Don't shrink FP constpool if SSE2 is available since cvtss2sd is more
// expensive than a straight movsd. On the other hand, it's important to
// shrink long double fp constant since fldt is very slow.
return !X86ScalarSSEf64 || VT == MVT::f80;
}
/// Return true if we believe it is correct and profitable to reduce the
/// load node to a smaller type.
bool shouldReduceLoadWidth(SDNode *Load, ISD::LoadExtType ExtTy,
EVT NewVT) const override;
/// Return true if the specified scalar FP type is computed in an SSE
/// register, not on the X87 floating point stack.
bool isScalarFPTypeInSSEReg(EVT VT) const {
return (VT == MVT::f64 && X86ScalarSSEf64) || // f64 is when SSE2
(VT == MVT::f32 && X86ScalarSSEf32); // f32 is when SSE1
}
/// Return true if the target uses the MSVC _ftol2 routine for fptoui.
bool isTargetFTOL() const;
/// Return true if the MSVC _ftol2 routine should be used for fptoui to the
/// given type.
bool isIntegerTypeFTOL(EVT VT) const {
return isTargetFTOL() && VT == MVT::i64;
}
/// \brief Returns true if it is beneficial to convert a load of a constant
/// to just the constant itself.
bool shouldConvertConstantLoadToIntImm(const APInt &Imm,
Type *Ty) const override;
/// Return true if EXTRACT_SUBVECTOR is cheap for this result type
/// with this index.
bool isExtractSubvectorCheap(EVT ResVT, unsigned Index) const override;
/// Intel processors have a unified instruction and data cache
const char * getClearCacheBuiltinName() const override {
return nullptr; // nothing to do, move along.
}
unsigned getRegisterByName(const char* RegName, EVT VT) const override;
/// This method returns a target specific FastISel object,
/// or null if the target does not support "fast" ISel.
FastISel *createFastISel(FunctionLoweringInfo &funcInfo,
const TargetLibraryInfo *libInfo) const override;
/// Return true if the target stores stack protector cookies at a fixed
/// offset in some non-standard address space, and populates the address
/// space and offset as appropriate.
bool getStackCookieLocation(unsigned &AddressSpace,
unsigned &Offset) const override;
SDValue BuildFILD(SDValue Op, EVT SrcVT, SDValue Chain, SDValue StackSlot,
SelectionDAG &DAG) const;
bool isNoopAddrSpaceCast(unsigned SrcAS, unsigned DestAS) const override;
bool useLoadStackGuardNode() const override;
/// \brief Customize the preferred legalization strategy for certain types.
LegalizeTypeAction getPreferredVectorAction(EVT VT) const override;
protected:
std::pair<const TargetRegisterClass *, uint8_t>
findRepresentativeClass(const TargetRegisterInfo *TRI,
MVT VT) const override;
private:
/// Keep a pointer to the X86Subtarget around so that we can
/// make the right decision when generating code for different targets.
const X86Subtarget *Subtarget;
const DataLayout *TD;
/// Select between SSE or x87 floating point ops.
/// When SSE is available, use it for f32 operations.
/// When SSE2 is available, use it for f64 operations.
bool X86ScalarSSEf32;
bool X86ScalarSSEf64;
/// A list of legal FP immediates.
std::vector<APFloat> LegalFPImmediates;
/// Indicate that this x86 target can instruction
/// select the specified FP immediate natively.
void addLegalFPImmediate(const APFloat& Imm) {
LegalFPImmediates.push_back(Imm);
}
SDValue LowerCallResult(SDValue Chain, SDValue InFlag,
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::InputArg> &Ins,
SDLoc dl, SelectionDAG &DAG,
SmallVectorImpl<SDValue> &InVals) const;
SDValue LowerMemArgument(SDValue Chain,
CallingConv::ID CallConv,
const SmallVectorImpl<ISD::InputArg> &ArgInfo,
SDLoc dl, SelectionDAG &DAG,
const CCValAssign &VA, MachineFrameInfo *MFI,
unsigned i) const;
SDValue LowerMemOpCallTo(SDValue Chain, SDValue StackPtr, SDValue Arg,
SDLoc dl, SelectionDAG &DAG,
const CCValAssign &VA,
ISD::ArgFlagsTy Flags) const;
// Call lowering helpers.
/// Check whether the call is eligible for tail call optimization. Targets
/// that want to do tail call optimization should implement this function.
bool IsEligibleForTailCallOptimization(SDValue Callee,
CallingConv::ID CalleeCC,
bool isVarArg,
bool isCalleeStructRet,
bool isCallerStructRet,
Type *RetTy,
const SmallVectorImpl<ISD::OutputArg> &Outs,
const SmallVectorImpl<SDValue> &OutVals,
const SmallVectorImpl<ISD::InputArg> &Ins,
SelectionDAG& DAG) const;
bool IsCalleePop(bool isVarArg, CallingConv::ID CallConv) const;
SDValue EmitTailCallLoadRetAddr(SelectionDAG &DAG, SDValue &OutRetAddr,
SDValue Chain, bool IsTailCall, bool Is64Bit,
int FPDiff, SDLoc dl) const;
unsigned GetAlignedArgumentStackSize(unsigned StackSize,
SelectionDAG &DAG) const;
std::pair<SDValue,SDValue> FP_TO_INTHelper(SDValue Op, SelectionDAG &DAG,
bool isSigned,
bool isReplace) const;
SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerBUILD_VECTORvXi1(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerVSELECT(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerEXTRACT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const;
SDValue ExtractBitFromMaskVector(SDValue Op, SelectionDAG &DAG) const;
SDValue InsertBitToMaskVector(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerINSERT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerGlobalAddress(const GlobalValue *GV, SDLoc dl,
int64_t Offset, SelectionDAG &DAG) const;
SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerExternalSymbol(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerSINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerUINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerUINT_TO_FP_i64(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerUINT_TO_FP_i32(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerUINT_TO_FP_vec(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerTRUNCATE(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFP_TO_SINT(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFP_TO_UINT(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerToBT(SDValue And, ISD::CondCode CC,
SDLoc dl, SelectionDAG &DAG) const;
SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerSELECT(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerBRCOND(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerMEMSET(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFRAME_TO_ARGS_OFFSET(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerEH_RETURN(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const;
SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
SDValue LowerWin64_i128OP(SDValue Op, SelectionDAG &DAG) const;
SDValue
LowerFormalArguments(SDValue Chain,
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::InputArg> &Ins,
SDLoc dl, SelectionDAG &DAG,
SmallVectorImpl<SDValue> &InVals) const override;
SDValue LowerCall(CallLoweringInfo &CLI,
SmallVectorImpl<SDValue> &InVals) const override;
SDValue LowerReturn(SDValue Chain,
CallingConv::ID CallConv, bool isVarArg,
const SmallVectorImpl<ISD::OutputArg> &Outs,
const SmallVectorImpl<SDValue> &OutVals,
SDLoc dl, SelectionDAG &DAG) const override;
bool isUsedByReturnOnly(SDNode *N, SDValue &Chain) const override;
bool mayBeEmittedAsTailCall(CallInst *CI) const override;
EVT getTypeForExtArgOrReturn(LLVMContext &Context, EVT VT,
ISD::NodeType ExtendKind) const override;
bool CanLowerReturn(CallingConv::ID CallConv, MachineFunction &MF,
bool isVarArg,
const SmallVectorImpl<ISD::OutputArg> &Outs,
LLVMContext &Context) const override;
const MCPhysReg *getScratchRegisters(CallingConv::ID CC) const override;
bool shouldExpandAtomicLoadInIR(LoadInst *SI) const override;
bool shouldExpandAtomicStoreInIR(StoreInst *SI) const override;
bool shouldExpandAtomicRMWInIR(AtomicRMWInst *AI) const override;
LoadInst *
lowerIdempotentRMWIntoFencedLoad(AtomicRMWInst *AI) const override;
bool needsCmpXchgNb(const Type *MemType) const;
/// Utility function to emit atomic-load-arith operations (and, or, xor,
/// nand, max, min, umax, umin). It takes the corresponding instruction to
/// expand, the associated machine basic block, and the associated X86
/// opcodes for reg/reg.
MachineBasicBlock *EmitAtomicLoadArith(MachineInstr *MI,
MachineBasicBlock *MBB) const;
/// Utility function to emit atomic-load-arith operations (and, or, xor,
/// nand, add, sub, swap) for 64-bit operands on 32-bit target.
MachineBasicBlock *EmitAtomicLoadArith6432(MachineInstr *MI,
MachineBasicBlock *MBB) const;
// Utility function to emit the low-level va_arg code for X86-64.
MachineBasicBlock *EmitVAARG64WithCustomInserter(
MachineInstr *MI,
MachineBasicBlock *MBB) const;
/// Utility function to emit the xmm reg save portion of va_start.
MachineBasicBlock *EmitVAStartSaveXMMRegsWithCustomInserter(
MachineInstr *BInstr,
MachineBasicBlock *BB) const;
MachineBasicBlock *EmitLoweredSelect(MachineInstr *I,
MachineBasicBlock *BB) const;
MachineBasicBlock *EmitLoweredWinAlloca(MachineInstr *MI,
MachineBasicBlock *BB) const;
MachineBasicBlock *EmitLoweredSegAlloca(MachineInstr *MI,
MachineBasicBlock *BB) const;
MachineBasicBlock *EmitLoweredTLSCall(MachineInstr *MI,
MachineBasicBlock *BB) const;
MachineBasicBlock *emitLoweredTLSAddr(MachineInstr *MI,
MachineBasicBlock *BB) const;
MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr *MI,
MachineBasicBlock *MBB) const;
MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr *MI,
MachineBasicBlock *MBB) const;
MachineBasicBlock *emitFMA3Instr(MachineInstr *MI,
MachineBasicBlock *MBB) const;
/// Emit nodes that will be selected as "test Op0,Op0", or something
/// equivalent, for use with the given x86 condition code.
SDValue EmitTest(SDValue Op0, unsigned X86CC, SDLoc dl,
SelectionDAG &DAG) const;
/// Emit nodes that will be selected as "cmp Op0,Op1", or something
/// equivalent, for use with the given x86 condition code.
SDValue EmitCmp(SDValue Op0, SDValue Op1, unsigned X86CC, SDLoc dl,
SelectionDAG &DAG) const;
/// Convert a comparison if required by the subtarget.
SDValue ConvertCmpIfNecessary(SDValue Cmp, SelectionDAG &DAG) const;
/// Use rsqrt* to speed up sqrt calculations.
SDValue getRsqrtEstimate(SDValue Operand, DAGCombinerInfo &DCI,
unsigned &RefinementSteps,
bool &UseOneConstNR) const override;
/// Use rcp* to speed up fdiv calculations.
SDValue getRecipEstimate(SDValue Operand, DAGCombinerInfo &DCI,
unsigned &RefinementSteps) const override;
};
namespace X86 {
FastISel *createFastISel(FunctionLoweringInfo &funcInfo,
const TargetLibraryInfo *libInfo);
}
}
#endif // X86ISELLOWERING_H