llvm-6502/test/CodeGen/SystemZ/frame-15.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

356 lines
14 KiB
LLVM

; Test the handling of base + index + 12-bit displacement addresses for
; large frames, in cases where no 20-bit form exists. The tests here
; assume z10 register pressure, without the high words being available.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | \
; RUN: FileCheck -check-prefix=CHECK-NOFP %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 -disable-fp-elim | \
; RUN: FileCheck -check-prefix=CHECK-FP %s
declare void @foo(float *%ptr1, float *%ptr2)
; This file tests what happens when a displacement is converted from
; being relative to the start of a frame object to being relative to
; the frame itself. In some cases the test is only possible if two
; objects are allocated.
;
; Rather than rely on a particular order for those objects, the tests
; instead allocate two objects of the same size and apply the test to
; both of them. For consistency, all tests follow this model, even if
; one object would actually be enough.
; First check the highest in-range offset after conversion, which is 4092
; for word-addressing instructions like LDEB.
;
; The last in-range doubleword offset is 4088. Since the frame has two
; emergency spill slots at 160(%r15), the amount that we need to allocate
; in order to put another object at offset 4088 is (4088 - 176) / 4 = 978
; words.
define void @f1(double *%dst) {
; CHECK-NOFP-LABEL: f1:
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f1:
; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r11)
; CHECK-FP: br %r14
%region1 = alloca [978 x float], align 8
%region2 = alloca [978 x float], align 8
%start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 1
%ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 1
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Test the first out-of-range offset.
define void @f2(double *%dst) {
; CHECK-NOFP-LABEL: f2:
; CHECK-NOFP: lghi %r1, 4096
; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f2:
; CHECK-FP: lghi %r1, 4096
; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [978 x float], align 8
%region2 = alloca [978 x float], align 8
%start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Test the next offset after that.
define void @f3(double *%dst) {
; CHECK-NOFP-LABEL: f3:
; CHECK-NOFP: lghi %r1, 4096
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f3:
; CHECK-FP: lghi %r1, 4096
; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [978 x float], align 8
%region2 = alloca [978 x float], align 8
%start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 3
%ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 3
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Add 4096 bytes (1024 words) to the size of each object and repeat.
define void @f4(double *%dst) {
; CHECK-NOFP-LABEL: f4:
; CHECK-NOFP: lghi %r1, 4096
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f4:
; CHECK-FP: lghi %r1, 4096
; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [2002 x float], align 8
%region2 = alloca [2002 x float], align 8
%start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 1
%ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 1
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; ...as above.
define void @f5(double *%dst) {
; CHECK-NOFP-LABEL: f5:
; CHECK-NOFP: lghi %r1, 8192
; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f5:
; CHECK-FP: lghi %r1, 8192
; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [2002 x float], align 8
%region2 = alloca [2002 x float], align 8
%start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 2
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; ...as above.
define void @f6(double *%dst) {
; CHECK-NOFP-LABEL: f6:
; CHECK-NOFP: lghi %r1, 8192
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f6:
; CHECK-FP: lghi %r1, 8192
; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [2002 x float], align 8
%region2 = alloca [2002 x float], align 8
%start1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2002 x float], [2002 x float]* %region1, i64 0, i64 3
%ptr2 = getelementptr inbounds [2002 x float], [2002 x float]* %region2, i64 0, i64 3
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Now try an offset of 4092 from the start of the object, with the object
; being at offset 8192. This time we need objects of (8192 - 168) / 4 = 2004
; words.
define void @f7(double *%dst) {
; CHECK-NOFP-LABEL: f7:
; CHECK-NOFP: lghi %r1, 8192
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4092(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f7:
; CHECK-FP: lghi %r1, 8192
; CHECK-FP: ldeb {{%f[0-7]}}, 4092(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [2004 x float], align 8
%region2 = alloca [2004 x float], align 8
%start1 = getelementptr inbounds [2004 x float], [2004 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2004 x float], [2004 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2004 x float], [2004 x float]* %region1, i64 0, i64 1023
%ptr2 = getelementptr inbounds [2004 x float], [2004 x float]* %region2, i64 0, i64 1023
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Keep the object-relative offset the same but bump the size of the
; objects by one doubleword.
define void @f8(double *%dst) {
; CHECK-NOFP-LABEL: f8:
; CHECK-NOFP: lghi %r1, 12288
; CHECK-NOFP: ldeb {{%f[0-7]}}, 4(%r1,%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f8:
; CHECK-FP: lghi %r1, 12288
; CHECK-FP: ldeb {{%f[0-7]}}, 4(%r1,%r11)
; CHECK-FP: br %r14
%region1 = alloca [2006 x float], align 8
%region2 = alloca [2006 x float], align 8
%start1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 1023
%ptr2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 1023
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Check a case where the original displacement is out of range. The backend
; should force an LAY from the outset. We don't yet do any kind of anchor
; optimization, so there should be no offset on the LDEB itself.
define void @f9(double *%dst) {
; CHECK-NOFP-LABEL: f9:
; CHECK-NOFP: lay %r1, 12296(%r15)
; CHECK-NOFP: ldeb {{%f[0-7]}}, 0(%r1)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f9:
; CHECK-FP: lay %r1, 12296(%r11)
; CHECK-FP: ldeb {{%f[0-7]}}, 0(%r1)
; CHECK-FP: br %r14
%region1 = alloca [2006 x float], align 8
%region2 = alloca [2006 x float], align 8
%start1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [2006 x float], [2006 x float]* %region1, i64 0, i64 1024
%ptr2 = getelementptr inbounds [2006 x float], [2006 x float]* %region2, i64 0, i64 1024
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}
; Repeat f2 in a case that needs the emergency spill slots, because all
; call-clobbered and allocated call-saved registers are live. Note that
; %vptr and %dst are copied to call-saved registers, freeing up %r2 and
; %r3 during the main test.
define void @f10(i32 *%vptr, double *%dst) {
; CHECK-NOFP-LABEL: f10:
; CHECK-NOFP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r15)
; CHECK-NOFP: lghi [[REGISTER]], 4096
; CHECK-NOFP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r15)
; CHECK-NOFP: lg [[REGISTER]], [[OFFSET]](%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f10:
; CHECK-FP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r11)
; CHECK-FP: lghi [[REGISTER]], 4096
; CHECK-FP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r11)
; CHECK-FP: lg [[REGISTER]], [[OFFSET]](%r11)
; CHECK-FP: br %r14
%region1 = alloca [978 x float], align 8
%region2 = alloca [978 x float], align 8
%start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%ptr1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2
%i0 = load volatile i32 , i32 *%vptr
%i1 = load volatile i32 , i32 *%vptr
%i2 = load volatile i32 , i32 *%vptr
%i3 = load volatile i32 , i32 *%vptr
%i4 = load volatile i32 , i32 *%vptr
%i5 = load volatile i32 , i32 *%vptr
%i14 = load volatile i32 , i32 *%vptr
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
store volatile i32 %i0, i32 *%vptr
store volatile i32 %i1, i32 *%vptr
store volatile i32 %i2, i32 *%vptr
store volatile i32 %i3, i32 *%vptr
store volatile i32 %i4, i32 *%vptr
store volatile i32 %i5, i32 *%vptr
store volatile i32 %i14, i32 *%vptr
ret void
}
; Repeat f2 in a case where the index register is already occupied.
define void @f11(double *%dst, i64 %index) {
; CHECK-NOFP-LABEL: f11:
; CHECK-NOFP: lgr [[REGISTER:%r[1-9][0-5]?]], %r3
; CHECK-NOFP: lay %r1, 4096(%r15)
; CHECK-NOFP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r1)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f11:
; CHECK-FP: lgr [[REGISTER:%r[1-9][0-5]?]], %r3
; CHECK-FP: lay %r1, 4096(%r11)
; CHECK-FP: ldeb {{%f[0-7]}}, 0([[REGISTER]],%r1)
; CHECK-FP: br %r14
%region1 = alloca [978 x float], align 8
%region2 = alloca [978 x float], align 8
%start1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 0
%start2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 0
call void @foo(float *%start1, float *%start2)
%elem1 = getelementptr inbounds [978 x float], [978 x float]* %region1, i64 0, i64 2
%elem2 = getelementptr inbounds [978 x float], [978 x float]* %region2, i64 0, i64 2
%base1 = ptrtoint float *%elem1 to i64
%base2 = ptrtoint float *%elem2 to i64
%addr1 = add i64 %base1, %index
%addr2 = add i64 %base2, %index
%ptr1 = inttoptr i64 %addr1 to float *
%ptr2 = inttoptr i64 %addr2 to float *
%float1 = load float , float *%ptr1
%float2 = load float , float *%ptr2
%double1 = fpext float %float1 to double
%double2 = fpext float %float2 to double
store volatile double %double1, double *%dst
store volatile double %double2, double *%dst
ret void
}