llvm-6502/test/CodeGen/SystemZ/int-sub-04.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

141 lines
3.6 KiB
LLVM

; Test 64-bit subtraction in which the second operand is variable.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z196 | FileCheck %s
declare i64 @foo()
; Check SGR.
define i64 @f1(i64 %a, i64 %b) {
; CHECK-LABEL: f1:
; CHECK: sgr %r2, %r3
; CHECK: br %r14
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check SG with no displacement.
define i64 @f2(i64 %a, i64 *%src) {
; CHECK-LABEL: f2:
; CHECK: sg %r2, 0(%r3)
; CHECK: br %r14
%b = load i64 , i64 *%src
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check the high end of the aligned SG range.
define i64 @f3(i64 %a, i64 *%src) {
; CHECK-LABEL: f3:
; CHECK: sg %r2, 524280(%r3)
; CHECK: br %r14
%ptr = getelementptr i64, i64 *%src, i64 65535
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check the next doubleword up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i64 @f4(i64 %a, i64 *%src) {
; CHECK-LABEL: f4:
; CHECK: agfi %r3, 524288
; CHECK: sg %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i64, i64 *%src, i64 65536
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check the high end of the negative aligned SG range.
define i64 @f5(i64 %a, i64 *%src) {
; CHECK-LABEL: f5:
; CHECK: sg %r2, -8(%r3)
; CHECK: br %r14
%ptr = getelementptr i64, i64 *%src, i64 -1
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check the low end of the SG range.
define i64 @f6(i64 %a, i64 *%src) {
; CHECK-LABEL: f6:
; CHECK: sg %r2, -524288(%r3)
; CHECK: br %r14
%ptr = getelementptr i64, i64 *%src, i64 -65536
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check the next doubleword down, which needs separate address logic.
; Other sequences besides this one would be OK.
define i64 @f7(i64 %a, i64 *%src) {
; CHECK-LABEL: f7:
; CHECK: agfi %r3, -524296
; CHECK: sg %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i64, i64 *%src, i64 -65537
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check that SG allows an index.
define i64 @f8(i64 %a, i64 %src, i64 %index) {
; CHECK-LABEL: f8:
; CHECK: sg %r2, 524280({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%add1 = add i64 %src, %index
%add2 = add i64 %add1, 524280
%ptr = inttoptr i64 %add2 to i64 *
%b = load i64 , i64 *%ptr
%sub = sub i64 %a, %b
ret i64 %sub
}
; Check that subtractions of spilled values can use SG rather than SGR.
define i64 @f9(i64 *%ptr0) {
; CHECK-LABEL: f9:
; CHECK: brasl %r14, foo@PLT
; CHECK: sg %r2, 160(%r15)
; CHECK: br %r14
%ptr1 = getelementptr i64, i64 *%ptr0, i64 2
%ptr2 = getelementptr i64, i64 *%ptr0, i64 4
%ptr3 = getelementptr i64, i64 *%ptr0, i64 6
%ptr4 = getelementptr i64, i64 *%ptr0, i64 8
%ptr5 = getelementptr i64, i64 *%ptr0, i64 10
%ptr6 = getelementptr i64, i64 *%ptr0, i64 12
%ptr7 = getelementptr i64, i64 *%ptr0, i64 14
%ptr8 = getelementptr i64, i64 *%ptr0, i64 16
%ptr9 = getelementptr i64, i64 *%ptr0, i64 18
%val0 = load i64 , i64 *%ptr0
%val1 = load i64 , i64 *%ptr1
%val2 = load i64 , i64 *%ptr2
%val3 = load i64 , i64 *%ptr3
%val4 = load i64 , i64 *%ptr4
%val5 = load i64 , i64 *%ptr5
%val6 = load i64 , i64 *%ptr6
%val7 = load i64 , i64 *%ptr7
%val8 = load i64 , i64 *%ptr8
%val9 = load i64 , i64 *%ptr9
%ret = call i64 @foo()
%sub0 = sub i64 %ret, %val0
%sub1 = sub i64 %sub0, %val1
%sub2 = sub i64 %sub1, %val2
%sub3 = sub i64 %sub2, %val3
%sub4 = sub i64 %sub3, %val4
%sub5 = sub i64 %sub4, %val5
%sub6 = sub i64 %sub5, %val6
%sub7 = sub i64 %sub6, %val7
%sub8 = sub i64 %sub7, %val8
%sub9 = sub i64 %sub8, %val9
ret i64 %sub9
}