llvm-6502/test/CodeGen/X86/MergeConsecutiveStores.ll
Hal Finkel 24517d023f Add the ability to use GEPs for address sinking in CGP
The current memory-instruction optimization logic in CGP, which sinks parts of
the address computation that can be adsorbed by the addressing mode, does this
by explicitly converting the relevant part of the address computation into
IR-level integer operations (making use of ptrtoint and inttoptr). For most
targets this is currently not a problem, but for targets wishing to make use of
IR-level aliasing analysis during CodeGen, the use of ptrtoint/inttoptr is a
problem for two reasons:
  1. BasicAA becomes less powerful in the face of the ptrtoint/inttoptr
  2. In cases where type-punning was used, and BasicAA was used
     to override TBAA, BasicAA may no longer do so. (this had forced us to disable
     all use of TBAA in CodeGen; something which we can now enable again)

This (use of GEPs instead of ptrtoint/inttoptr) is not currently enabled by
default (except for those targets that use AA during CodeGen), and so aside
from some PowerPC subtargets and SystemZ, there should be no change in
behavior. We may be able to switch completely away from the ptrtoint/inttoptr
sinking on all targets, but further testing is required.

I've doubled-up on a number of existing tests that are sensitive to the
address sinking behavior (including some store-merging tests that are
sensitive to the order of the resulting ADD operations at the SDAG level).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206092 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-12 00:59:48 +00:00

437 lines
15 KiB
LLVM

; RUN: llc -march=x86-64 -mcpu=corei7 -mattr=+avx < %s | FileCheck %s
; RUN: llc -march=x86-64 -mcpu=corei7 -mattr=+avx -addr-sink-using-gep=1 < %s | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.8.0"
%struct.A = type { i8, i8, i8, i8, i8, i8, i8, i8 }
%struct.B = type { i32, i32, i32, i32, i32, i32, i32, i32 }
; CHECK: merge_const_store
; save 1,2,3 ... as one big integer.
; CHECK: movabsq $578437695752307201
; CHECK: ret
define void @merge_const_store(i32 %count, %struct.A* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.A* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.A* %.01, i64 0, i32 0
store i8 1, i8* %2, align 1
%3 = getelementptr inbounds %struct.A* %.01, i64 0, i32 1
store i8 2, i8* %3, align 1
%4 = getelementptr inbounds %struct.A* %.01, i64 0, i32 2
store i8 3, i8* %4, align 1
%5 = getelementptr inbounds %struct.A* %.01, i64 0, i32 3
store i8 4, i8* %5, align 1
%6 = getelementptr inbounds %struct.A* %.01, i64 0, i32 4
store i8 5, i8* %6, align 1
%7 = getelementptr inbounds %struct.A* %.01, i64 0, i32 5
store i8 6, i8* %7, align 1
%8 = getelementptr inbounds %struct.A* %.01, i64 0, i32 6
store i8 7, i8* %8, align 1
%9 = getelementptr inbounds %struct.A* %.01, i64 0, i32 7
store i8 8, i8* %9, align 1
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; No vectors because we use noimplicitfloat
; CHECK: merge_const_store_no_vec
; CHECK-NOT: vmovups
; CHECK: ret
define void @merge_const_store_no_vec(i32 %count, %struct.B* nocapture %p) noimplicitfloat{
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.B* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.B* %.01, i64 0, i32 0
store i32 0, i32* %2, align 4
%3 = getelementptr inbounds %struct.B* %.01, i64 0, i32 1
store i32 0, i32* %3, align 4
%4 = getelementptr inbounds %struct.B* %.01, i64 0, i32 2
store i32 0, i32* %4, align 4
%5 = getelementptr inbounds %struct.B* %.01, i64 0, i32 3
store i32 0, i32* %5, align 4
%6 = getelementptr inbounds %struct.B* %.01, i64 0, i32 4
store i32 0, i32* %6, align 4
%7 = getelementptr inbounds %struct.B* %.01, i64 0, i32 5
store i32 0, i32* %7, align 4
%8 = getelementptr inbounds %struct.B* %.01, i64 0, i32 6
store i32 0, i32* %8, align 4
%9 = getelementptr inbounds %struct.B* %.01, i64 0, i32 7
store i32 0, i32* %9, align 4
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; Move the constants using a single vector store.
; CHECK: merge_const_store_vec
; CHECK: vmovups
; CHECK: ret
define void @merge_const_store_vec(i32 %count, %struct.B* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.B* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.B* %.01, i64 0, i32 0
store i32 0, i32* %2, align 4
%3 = getelementptr inbounds %struct.B* %.01, i64 0, i32 1
store i32 0, i32* %3, align 4
%4 = getelementptr inbounds %struct.B* %.01, i64 0, i32 2
store i32 0, i32* %4, align 4
%5 = getelementptr inbounds %struct.B* %.01, i64 0, i32 3
store i32 0, i32* %5, align 4
%6 = getelementptr inbounds %struct.B* %.01, i64 0, i32 4
store i32 0, i32* %6, align 4
%7 = getelementptr inbounds %struct.B* %.01, i64 0, i32 5
store i32 0, i32* %7, align 4
%8 = getelementptr inbounds %struct.B* %.01, i64 0, i32 6
store i32 0, i32* %8, align 4
%9 = getelementptr inbounds %struct.B* %.01, i64 0, i32 7
store i32 0, i32* %9, align 4
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
; Move the first 4 constants as a single vector. Move the rest as scalars.
; CHECK: merge_nonconst_store
; CHECK: movl $67305985
; CHECK: movb
; CHECK: movb
; CHECK: movb
; CHECK: movb
; CHECK: ret
define void @merge_nonconst_store(i32 %count, i8 %zz, %struct.A* nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph:
%i.02 = phi i32 [ %10, %.lr.ph ], [ 0, %0 ]
%.01 = phi %struct.A* [ %11, %.lr.ph ], [ %p, %0 ]
%2 = getelementptr inbounds %struct.A* %.01, i64 0, i32 0
store i8 1, i8* %2, align 1
%3 = getelementptr inbounds %struct.A* %.01, i64 0, i32 1
store i8 2, i8* %3, align 1
%4 = getelementptr inbounds %struct.A* %.01, i64 0, i32 2
store i8 3, i8* %4, align 1
%5 = getelementptr inbounds %struct.A* %.01, i64 0, i32 3
store i8 4, i8* %5, align 1
%6 = getelementptr inbounds %struct.A* %.01, i64 0, i32 4
store i8 %zz, i8* %6, align 1 ; <----------- Not a const;
%7 = getelementptr inbounds %struct.A* %.01, i64 0, i32 5
store i8 6, i8* %7, align 1
%8 = getelementptr inbounds %struct.A* %.01, i64 0, i32 6
store i8 7, i8* %8, align 1
%9 = getelementptr inbounds %struct.A* %.01, i64 0, i32 7
store i8 8, i8* %9, align 1
%10 = add nsw i32 %i.02, 1
%11 = getelementptr inbounds %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %10, %count
br i1 %exitcond, label %._crit_edge, label %.lr.ph
._crit_edge:
ret void
}
;CHECK-LABEL: merge_loads_i16:
; load:
;CHECK: movw
; store:
;CHECK: movw
;CHECK: ret
define void @merge_loads_i16(i32 %count, %struct.A* noalias nocapture %q, %struct.A* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.A* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.A* %q, i64 0, i32 1
br label %4
; <label>:4 ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %9, %4 ]
%.01 = phi %struct.A* [ %p, %.lr.ph ], [ %10, %4 ]
%5 = load i8* %2, align 1
%6 = load i8* %3, align 1
%7 = getelementptr inbounds %struct.A* %.01, i64 0, i32 0
store i8 %5, i8* %7, align 1
%8 = getelementptr inbounds %struct.A* %.01, i64 0, i32 1
store i8 %6, i8* %8, align 1
%9 = add nsw i32 %i.02, 1
%10 = getelementptr inbounds %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %9, %count
br i1 %exitcond, label %._crit_edge, label %4
._crit_edge: ; preds = %4, %0
ret void
}
; The loads and the stores are interleved. Can't merge them.
;CHECK-LABEL: no_merge_loads:
;CHECK: movb
;CHECK: movb
;CHECK: movb
;CHECK: movb
;CHECK: ret
define void @no_merge_loads(i32 %count, %struct.A* noalias nocapture %q, %struct.A* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.A* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.A* %q, i64 0, i32 1
br label %a4
a4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %a9, %a4 ]
%.01 = phi %struct.A* [ %p, %.lr.ph ], [ %a10, %a4 ]
%a5 = load i8* %2, align 1
%a7 = getelementptr inbounds %struct.A* %.01, i64 0, i32 0
store i8 %a5, i8* %a7, align 1
%a8 = getelementptr inbounds %struct.A* %.01, i64 0, i32 1
%a6 = load i8* %3, align 1
store i8 %a6, i8* %a8, align 1
%a9 = add nsw i32 %i.02, 1
%a10 = getelementptr inbounds %struct.A* %.01, i64 1
%exitcond = icmp eq i32 %a9, %count
br i1 %exitcond, label %._crit_edge, label %a4
._crit_edge: ; preds = %4, %0
ret void
}
;CHECK-LABEL: merge_loads_integer:
; load:
;CHECK: movq
; store:
;CHECK: movq
;CHECK: ret
define void @merge_loads_integer(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%1 = icmp sgt i32 %count, 0
br i1 %1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%2 = getelementptr inbounds %struct.B* %q, i64 0, i32 0
%3 = getelementptr inbounds %struct.B* %q, i64 0, i32 1
br label %4
; <label>:4 ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %9, %4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %10, %4 ]
%5 = load i32* %2
%6 = load i32* %3
%7 = getelementptr inbounds %struct.B* %.01, i64 0, i32 0
store i32 %5, i32* %7
%8 = getelementptr inbounds %struct.B* %.01, i64 0, i32 1
store i32 %6, i32* %8
%9 = add nsw i32 %i.02, 1
%10 = getelementptr inbounds %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %9, %count
br i1 %exitcond, label %._crit_edge, label %4
._crit_edge: ; preds = %4, %0
ret void
}
;CHECK-LABEL: merge_loads_vector:
; load:
;CHECK: movups
; store:
;CHECK: movups
;CHECK: ret
define void @merge_loads_vector(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%a1 = icmp sgt i32 %count, 0
br i1 %a1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%a2 = getelementptr inbounds %struct.B* %q, i64 0, i32 0
%a3 = getelementptr inbounds %struct.B* %q, i64 0, i32 1
%a4 = getelementptr inbounds %struct.B* %q, i64 0, i32 2
%a5 = getelementptr inbounds %struct.B* %q, i64 0, i32 3
br label %block4
block4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %c9, %block4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %c10, %block4 ]
%a7 = getelementptr inbounds %struct.B* %.01, i64 0, i32 0
%a8 = getelementptr inbounds %struct.B* %.01, i64 0, i32 1
%a9 = getelementptr inbounds %struct.B* %.01, i64 0, i32 2
%a10 = getelementptr inbounds %struct.B* %.01, i64 0, i32 3
%b1 = load i32* %a2
%b2 = load i32* %a3
%b3 = load i32* %a4
%b4 = load i32* %a5
store i32 %b1, i32* %a7
store i32 %b2, i32* %a8
store i32 %b3, i32* %a9
store i32 %b4, i32* %a10
%c9 = add nsw i32 %i.02, 1
%c10 = getelementptr inbounds %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %c9, %count
br i1 %exitcond, label %._crit_edge, label %block4
._crit_edge: ; preds = %4, %0
ret void
}
;CHECK-LABEL: merge_loads_no_align:
; load:
;CHECK: movl
;CHECK: movl
;CHECK: movl
;CHECK: movl
; store:
;CHECK: movl
;CHECK: movl
;CHECK: movl
;CHECK: movl
;CHECK: ret
define void @merge_loads_no_align(i32 %count, %struct.B* noalias nocapture %q, %struct.B* noalias nocapture %p) nounwind uwtable noinline ssp {
%a1 = icmp sgt i32 %count, 0
br i1 %a1, label %.lr.ph, label %._crit_edge
.lr.ph: ; preds = %0
%a2 = getelementptr inbounds %struct.B* %q, i64 0, i32 0
%a3 = getelementptr inbounds %struct.B* %q, i64 0, i32 1
%a4 = getelementptr inbounds %struct.B* %q, i64 0, i32 2
%a5 = getelementptr inbounds %struct.B* %q, i64 0, i32 3
br label %block4
block4: ; preds = %4, %.lr.ph
%i.02 = phi i32 [ 0, %.lr.ph ], [ %c9, %block4 ]
%.01 = phi %struct.B* [ %p, %.lr.ph ], [ %c10, %block4 ]
%a7 = getelementptr inbounds %struct.B* %.01, i64 0, i32 0
%a8 = getelementptr inbounds %struct.B* %.01, i64 0, i32 1
%a9 = getelementptr inbounds %struct.B* %.01, i64 0, i32 2
%a10 = getelementptr inbounds %struct.B* %.01, i64 0, i32 3
%b1 = load i32* %a2, align 1
%b2 = load i32* %a3, align 1
%b3 = load i32* %a4, align 1
%b4 = load i32* %a5, align 1
store i32 %b1, i32* %a7, align 1
store i32 %b2, i32* %a8, align 1
store i32 %b3, i32* %a9, align 1
store i32 %b4, i32* %a10, align 1
%c9 = add nsw i32 %i.02, 1
%c10 = getelementptr inbounds %struct.B* %.01, i64 1
%exitcond = icmp eq i32 %c9, %count
br i1 %exitcond, label %._crit_edge, label %block4
._crit_edge: ; preds = %4, %0
ret void
}
; Make sure that we merge the consecutive load/store sequence below and use a
; word (16 bit) instead of a byte copy.
; CHECK: MergeLoadStoreBaseIndexOffset
; CHECK: movw (%{{.*}},%{{.*}}), [[REG:%[a-z]+]]
; CHECK: movw [[REG]], (%{{.*}})
define void @MergeLoadStoreBaseIndexOffset(i64* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %11, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %10, %1 ]
%.0 = phi i64* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i64* %.0, i64 1
%3 = load i64* %.0, align 1
%4 = getelementptr inbounds i8* %c, i64 %3
%5 = load i8* %4, align 1
%6 = add i64 %3, 1
%7 = getelementptr inbounds i8* %c, i64 %6
%8 = load i8* %7, align 1
store i8 %5, i8* %.08, align 1
%9 = getelementptr inbounds i8* %.08, i64 1
store i8 %8, i8* %9, align 1
%10 = getelementptr inbounds i8* %.08, i64 2
%11 = add nsw i32 %.09, -1
%12 = icmp eq i32 %11, 0
br i1 %12, label %13, label %1
; <label>:13
ret void
}
; Make sure that we merge the consecutive load/store sequence below and use a
; word (16 bit) instead of a byte copy even if there are intermediate sign
; extensions.
; CHECK: MergeLoadStoreBaseIndexOffsetSext
; CHECK: movw (%{{.*}},%{{.*}}), [[REG:%[a-z]+]]
; CHECK: movw [[REG]], (%{{.*}})
define void @MergeLoadStoreBaseIndexOffsetSext(i8* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %12, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %11, %1 ]
%.0 = phi i8* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i8* %.0, i64 1
%3 = load i8* %.0, align 1
%4 = sext i8 %3 to i64
%5 = getelementptr inbounds i8* %c, i64 %4
%6 = load i8* %5, align 1
%7 = add i64 %4, 1
%8 = getelementptr inbounds i8* %c, i64 %7
%9 = load i8* %8, align 1
store i8 %6, i8* %.08, align 1
%10 = getelementptr inbounds i8* %.08, i64 1
store i8 %9, i8* %10, align 1
%11 = getelementptr inbounds i8* %.08, i64 2
%12 = add nsw i32 %.09, -1
%13 = icmp eq i32 %12, 0
br i1 %13, label %14, label %1
; <label>:14
ret void
}
; However, we can only merge ignore sign extensions when they are on all memory
; computations;
; CHECK: loadStoreBaseIndexOffsetSextNoSex
; CHECK-NOT: movw (%{{.*}},%{{.*}}), [[REG:%[a-z]+]]
; CHECK-NOT: movw [[REG]], (%{{.*}})
define void @loadStoreBaseIndexOffsetSextNoSex(i8* %a, i8* %b, i8* %c, i32 %n) {
br label %1
; <label>:1
%.09 = phi i32 [ %n, %0 ], [ %12, %1 ]
%.08 = phi i8* [ %b, %0 ], [ %11, %1 ]
%.0 = phi i8* [ %a, %0 ], [ %2, %1 ]
%2 = getelementptr inbounds i8* %.0, i64 1
%3 = load i8* %.0, align 1
%4 = sext i8 %3 to i64
%5 = getelementptr inbounds i8* %c, i64 %4
%6 = load i8* %5, align 1
%7 = add i8 %3, 1
%wrap.4 = sext i8 %7 to i64
%8 = getelementptr inbounds i8* %c, i64 %wrap.4
%9 = load i8* %8, align 1
store i8 %6, i8* %.08, align 1
%10 = getelementptr inbounds i8* %.08, i64 1
store i8 %9, i8* %10, align 1
%11 = getelementptr inbounds i8* %.08, i64 2
%12 = add nsw i32 %.09, -1
%13 = icmp eq i32 %12, 0
br i1 %13, label %14, label %1
; <label>:14
ret void
}