llvm-6502/include/llvm/CodeGen/ScheduleDAGInstrs.h

//==- ScheduleDAGInstrs.h - MachineInstr Scheduling --------------*- C++ -*-==//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements the ScheduleDAGInstrs class, which implements
// scheduling for a MachineInstr-based dependency graph.
//
//===----------------------------------------------------------------------===//

#ifndef SCHEDULEDAGINSTRS_H
#define SCHEDULEDAGINSTRS_H

#include "llvm/CodeGen/MachineDominators.h"
#include "llvm/CodeGen/MachineLoopInfo.h"
#include "llvm/CodeGen/ScheduleDAG.h"
#include "llvm/CodeGen/TargetSchedule.h"
#include "llvm/Support/Compiler.h"
#include "llvm/Target/TargetRegisterInfo.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/SparseSet.h"
#include <map>

namespace llvm {
  class MachineLoopInfo;
  class MachineDominatorTree;
  class LiveIntervals;
  class RegPressureTracker;

  /// An individual mapping from virtual register number to SUnit.
  struct VReg2SUnit {
    unsigned VirtReg;
    SUnit *SU;

    VReg2SUnit(unsigned reg, SUnit *su): VirtReg(reg), SU(su) {}

    unsigned getSparseSetIndex() const {
      return TargetRegisterInfo::virtReg2Index(VirtReg);
    }
  };

  /// Record a physical register access.
  /// For non data-dependent uses, OpIdx == -1.
  struct PhysRegSUOper {
    SUnit *SU;
    int OpIdx;

    PhysRegSUOper(SUnit *su, int op): SU(su), OpIdx(op) {}
  };

  /// Combine a SparseSet with a 1x1 vector to track physical registers.
  /// The SparseSet allows iterating over the (few) live registers for quickly
  /// comparing against a regmask or clearing the set.
  ///
  /// Storage for the map is allocated once for the pass. The map can be
  /// cleared between scheduling regions without freeing unused entries.
  class Reg2SUnitsMap {
    SparseSet<unsigned> PhysRegSet;
    std::vector<std::vector<PhysRegSUOper> > SUnits;
  public:
    typedef SparseSet<unsigned>::const_iterator const_iterator;

    // Allow iteration over register numbers (keys) in the map. If needed, we
    // can provide an iterator over SUnits (values) as well.
    const_iterator reg_begin() const { return PhysRegSet.begin(); }
    const_iterator reg_end() const { return PhysRegSet.end(); }

    /// Initialize the map with the number of registers.
    /// If the map is already large enough, no allocation occurs.
    /// For simplicity we expect the map to be empty().
    void setRegLimit(unsigned Limit);

    /// Returns true if the map is empty.
    bool empty() const { return PhysRegSet.empty(); }

    /// Clear the map without deallocating storage.
    void clear();

    bool contains(unsigned Reg) const { return PhysRegSet.count(Reg); }

    /// If this register is mapped, return its existing SUnits vector.
    /// Otherwise map the register and return an empty SUnits vector.
    std::vector<PhysRegSUOper> &operator[](unsigned Reg) {
      bool New = PhysRegSet.insert(Reg).second;
      assert((!New || SUnits[Reg].empty()) && "stale SUnits vector");
      (void)New;
      return SUnits[Reg];
    }

    /// Erase an existing element without freeing memory.
    void erase(unsigned Reg) {
      PhysRegSet.erase(Reg);
      SUnits[Reg].clear();
    }
  };

  /// Use SparseSet as a SparseMap by relying on the fact that it never
  /// compares ValueT's, only unsigned keys. This allows the set to be cleared
  /// between scheduling regions in constant time as long as ValueT does not
  /// require a destructor.
  typedef SparseSet<VReg2SUnit, VirtReg2IndexFunctor> VReg2SUnitMap;

  /// ScheduleDAGInstrs - A ScheduleDAG subclass for scheduling lists of
  /// MachineInstrs.
  class ScheduleDAGInstrs : public ScheduleDAG {
  protected:
    const MachineLoopInfo &MLI;
    const MachineDominatorTree &MDT;
    const MachineFrameInfo *MFI;

    /// Live Intervals provides reaching defs in preRA scheduling.
    LiveIntervals *LIS;

    /// TargetSchedModel provides an interface to the machine model.
    TargetSchedModel SchedModel;

    /// isPostRA flag indicates vregs cannot be present.
    bool IsPostRA;

    /// UnitLatencies (misnamed) flag avoids computing def-use latencies, using
    /// the def-side latency only.
    bool UnitLatencies;

    /// The standard DAG builder does not normally include terminators as DAG
    /// nodes because it does not create the necessary dependencies to prevent
    /// reordering. A specialized scheduler can overide
    /// TargetInstrInfo::isSchedulingBoundary then enable this flag to indicate
    /// it has taken responsibility for scheduling the terminator correctly.
    bool CanHandleTerminators;

    /// State specific to the current scheduling region.
    /// ------------------------------------------------

    /// The block in which to insert instructions
    MachineBasicBlock *BB;

    /// The beginning of the range to be scheduled.
    MachineBasicBlock::iterator RegionBegin;

    /// The end of the range to be scheduled.
    MachineBasicBlock::iterator RegionEnd;

    /// The index in BB of RegionEnd.
    unsigned EndIndex;

    /// After calling BuildSchedGraph, each machine instruction in the current
    /// scheduling region is mapped to an SUnit.
    DenseMap<MachineInstr*, SUnit*> MISUnitMap;

    /// State internal to DAG building.
    /// -------------------------------

    /// Defs, Uses - Remember where defs and uses of each register are as we
    /// iterate upward through the instructions. This is allocated here instead
    /// of inside BuildSchedGraph to avoid the need for it to be initialized and
    /// destructed for each block.
    Reg2SUnitsMap Defs;
    Reg2SUnitsMap Uses;

    /// Track the last instructon in this region defining each virtual register.
    VReg2SUnitMap VRegDefs;

    /// PendingLoads - Remember where unknown loads are after the most recent
    /// unknown store, as we iterate. As with Defs and Uses, this is here
    /// to minimize construction/destruction.
    std::vector<SUnit *> PendingLoads;

    /// DbgValues - Remember instruction that precedes DBG_VALUE.
    /// These are generated by buildSchedGraph but persist so they can be
    /// referenced when emitting the final schedule.
    typedef std::vector<std::pair<MachineInstr *, MachineInstr *> >
      DbgValueVector;
    DbgValueVector DbgValues;
    MachineInstr *FirstDbgValue;

  public:
    explicit ScheduleDAGInstrs(MachineFunction &mf,
                               const MachineLoopInfo &mli,
                               const MachineDominatorTree &mdt,
                               bool IsPostRAFlag,
                               LiveIntervals *LIS = 0);

    virtual ~ScheduleDAGInstrs() {}

    /// \brief Get the machine model for instruction scheduling.
    const TargetSchedModel *getSchedModel() const { return &SchedModel; }

    /// begin - Return an iterator to the top of the current scheduling region.
    MachineBasicBlock::iterator begin() const { return RegionBegin; }

    /// end - Return an iterator to the bottom of the current scheduling region.
    MachineBasicBlock::iterator end() const { return RegionEnd; }

    /// newSUnit - Creates a new SUnit and return a ptr to it.
    SUnit *newSUnit(MachineInstr *MI);

    /// getSUnit - Return an existing SUnit for this MI, or NULL.
    SUnit *getSUnit(MachineInstr *MI) const;

    /// startBlock - Prepare to perform scheduling in the given block.
    virtual void startBlock(MachineBasicBlock *BB);

    /// finishBlock - Clean up after scheduling in the given block.
    virtual void finishBlock();

    /// Initialize the scheduler state for the next scheduling region.
    virtual void enterRegion(MachineBasicBlock *bb,
                             MachineBasicBlock::iterator begin,
                             MachineBasicBlock::iterator end,
                             unsigned endcount);

    /// Notify that the scheduler has finished scheduling the current region.
    virtual void exitRegion();

    /// buildSchedGraph - Build SUnits from the MachineBasicBlock that we are
    /// input.
    void buildSchedGraph(AliasAnalysis *AA, RegPressureTracker *RPTracker = 0);

    /// addSchedBarrierDeps - Add dependencies from instructions in the current
    /// list of instructions being scheduled to scheduling barrier. We want to
    /// make sure instructions which define registers that are either used by
    /// the terminator or are live-out are properly scheduled. This is
    /// especially important when the definition latency of the return value(s)
    /// are too high to be hidden by the branch or when the liveout registers
    /// used by instructions in the fallthrough block.
    void addSchedBarrierDeps();

    /// schedule - Order nodes according to selected style, filling
    /// in the Sequence member.
    ///
    /// Typically, a scheduling algorithm will implement schedule() without
    /// overriding enterRegion() or exitRegion().
    virtual void schedule() = 0;

    /// finalizeSchedule - Allow targets to perform final scheduling actions at
    /// the level of the whole MachineFunction. By default does nothing.
    virtual void finalizeSchedule() {}

    virtual void dumpNode(const SUnit *SU) const;

    /// Return a label for a DAG node that points to an instruction.
    virtual std::string getGraphNodeLabel(const SUnit *SU) const;

    /// Return a label for the region of code covered by the DAG.
    virtual std::string getDAGName() const;

  protected:
    void initSUnits();
    void addPhysRegDataDeps(SUnit *SU, unsigned OperIdx);
    void addPhysRegDeps(SUnit *SU, unsigned OperIdx);
    void addVRegDefDeps(SUnit *SU, unsigned OperIdx);
    void addVRegUseDeps(SUnit *SU, unsigned OperIdx);
  };

  /// newSUnit - Creates a new SUnit and return a ptr to it.
  inline SUnit *ScheduleDAGInstrs::newSUnit(MachineInstr *MI) {
#ifndef NDEBUG
    const SUnit *Addr = SUnits.empty() ? 0 : &SUnits[0];
#endif
    SUnits.push_back(SUnit(MI, (unsigned)SUnits.size()));
    assert((Addr == 0 || Addr == &SUnits[0]) &&
           "SUnits std::vector reallocated on the fly!");
    SUnits.back().OrigNode = &SUnits.back();
    return &SUnits.back();
  }

  /// getSUnit - Return an existing SUnit for this MI, or NULL.
  inline SUnit *ScheduleDAGInstrs::getSUnit(MachineInstr *MI) const {
    DenseMap<MachineInstr*, SUnit*>::const_iterator I = MISUnitMap.find(MI);
    if (I == MISUnitMap.end())
      return 0;
    return I->second;
  }
} // namespace llvm

#endif