llvm-6502/lib/Target/X86/X86SchedSandyBridge.td
Andrew Trick f521997303 X86 machine model: reduce SandyBridge and Haswell ILPWindow.
The initial values were arbitrary. I want them to be more
conservative. This represents the number of latency cycles hidden by
OOO execution. In practice, I think it should be within a small factor
of the complex floating point operation latency so the scheduler can
make some attempt to hide latency even for smallish blocks.

These are by no means the best values, just a starting point for
tuning heuristics. Some benchmarks such as TSVC run faster with this
lower value for SandyBridge. I haven't run anything on Haswell, but
it's shouldn't be 2x SB.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179450 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-13 06:07:43 +00:00

123 lines
4.5 KiB
TableGen

//=- X86SchedSandyBridge.td - X86 Sandy Bridge Scheduling ----*- tablegen -*-=//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the machine model for Sandy Bridge to support instruction
// scheduling and other instruction cost heuristics.
//
//===----------------------------------------------------------------------===//
def SandyBridgeModel : SchedMachineModel {
// All x86 instructions are modeled as a single micro-op, and SB can decode 4
// instructions per cycle.
// FIXME: Identify instructions that aren't a single fused micro-op.
let IssueWidth = 4;
let MinLatency = 0; // 0 = Out-of-order execution.
let LoadLatency = 4;
let ILPWindow = 20;
let MispredictPenalty = 16;
}
let SchedModel = SandyBridgeModel in {
// Sandy Bridge can issue micro-ops to 6 different ports in one cycle.
// Ports 0, 1, and 5 handle all computation.
def SBPort0 : ProcResource<1>;
def SBPort1 : ProcResource<1>;
def SBPort5 : ProcResource<1>;
// Ports 2 and 3 are identical. They handle loads and the address half of
// stores.
def SBPort23 : ProcResource<2>;
// Port 4 gets the data half of stores. Store data can be available later than
// the store address, but since we don't model the latency of stores, we can
// ignore that.
def SBPort4 : ProcResource<1>;
// Many micro-ops are capable of issuing on multiple ports.
def SBPort05 : ProcResGroup<[SBPort0, SBPort5]>;
def SBPort15 : ProcResGroup<[SBPort1, SBPort5]>;
def SBPort015 : ProcResGroup<[SBPort0, SBPort1, SBPort5]>;
// Integer division issued on port 0.
def SBDivider : ProcResource<1>;
// Loads are 4 cycles, so ReadAfterLd registers needn't be available until 4
// cycles after the memory operand.
def : ReadAdvance<ReadAfterLd, 4>;
// Many SchedWrites are defined in pairs with and without a folded load.
// Instructions with folded loads are usually micro-fused, so they only appear
// as two micro-ops when queued in the reservation station.
// This multiclass defines the resource usage for variants with and without
// folded loads.
multiclass SBWriteResPair<X86FoldableSchedWrite SchedRW,
ProcResourceKind ExePort,
int Lat> {
// Register variant is using a single cycle on ExePort.
def : WriteRes<SchedRW, [ExePort]> { let Latency = Lat; }
// Memory variant also uses a cycle on port 2/3 and adds 4 cycles to the
// latency.
def : WriteRes<SchedRW.Folded, [SBPort23, ExePort]> {
let Latency = !add(Lat, 4);
}
}
// A folded store needs a cycle on port 4 for the store data, but it does not
// need an extra port 2/3 cycle to recompute the address.
def : WriteRes<WriteRMW, [SBPort4]>;
def : WriteRes<WriteStore, [SBPort23, SBPort4]>;
def : WriteRes<WriteLoad, [SBPort23]> { let Latency = 4; }
def : WriteRes<WriteMove, [SBPort015]>;
def : WriteRes<WriteZero, []>;
defm : SBWriteResPair<WriteALU, SBPort015, 1>;
defm : SBWriteResPair<WriteIMul, SBPort1, 3>;
defm : SBWriteResPair<WriteShift, SBPort05, 1>;
defm : SBWriteResPair<WriteJump, SBPort5, 1>;
// This is for simple LEAs with one or two input operands.
// The complex ones can only execute on port 1, and they require two cycles on
// the port to read all inputs. We don't model that.
def : WriteRes<WriteLEA, [SBPort15]>;
// This is quite rough, latency depends on the dividend.
def : WriteRes<WriteIDiv, [SBPort0, SBDivider]> {
let Latency = 25;
let ResourceCycles = [1, 10];
}
def : WriteRes<WriteIDivLd, [SBPort23, SBPort0, SBDivider]> {
let Latency = 29;
let ResourceCycles = [1, 1, 10];
}
// Scalar and vector floating point.
defm : SBWriteResPair<WriteFAdd, SBPort1, 3>;
defm : SBWriteResPair<WriteFMul, SBPort0, 5>;
defm : SBWriteResPair<WriteFDiv, SBPort0, 12>; // 10-14 cycles.
defm : SBWriteResPair<WriteFRcp, SBPort0, 5>;
defm : SBWriteResPair<WriteFSqrt, SBPort0, 15>;
defm : SBWriteResPair<WriteCvtF2I, SBPort1, 3>;
defm : SBWriteResPair<WriteCvtI2F, SBPort1, 4>;
defm : SBWriteResPair<WriteCvtF2F, SBPort1, 3>;
// Vector integer operations.
defm : SBWriteResPair<WriteVecShift, SBPort05, 1>;
defm : SBWriteResPair<WriteVecLogic, SBPort015, 1>;
defm : SBWriteResPair<WriteVecALU, SBPort15, 1>;
defm : SBWriteResPair<WriteVecIMul, SBPort0, 5>;
defm : SBWriteResPair<WriteShuffle, SBPort15, 1>;
def : WriteRes<WriteSystem, [SBPort015]> { let Latency = 100; }
def : WriteRes<WriteMicrocoded, [SBPort015]> { let Latency = 100; }
} // SchedModel