llvm-6502/test/Transforms/Scalarizer/basic.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

452 lines
20 KiB
LLVM

; RUN: opt %s -scalarizer -scalarize-load-store -dce -S | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
declare <4 x float> @ext(<4 x float>)
@g = global <4 x float> zeroinitializer
define void @f1(<4 x float> %init, <4 x float> *%base, i32 %count) {
; CHECK-LABEL: @f1(
; CHECK: entry:
; CHECK: %init.i0 = extractelement <4 x float> %init, i32 0
; CHECK: %init.i1 = extractelement <4 x float> %init, i32 1
; CHECK: %init.i2 = extractelement <4 x float> %init, i32 2
; CHECK: %init.i3 = extractelement <4 x float> %init, i32 3
; CHECK: br label %loop
; CHECK: loop:
; CHECK: %i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
; CHECK: %acc.i0 = phi float [ %init.i0, %entry ], [ %sel.i0, %loop ]
; CHECK: %acc.i1 = phi float [ %init.i1, %entry ], [ %sel.i1, %loop ]
; CHECK: %acc.i2 = phi float [ %init.i2, %entry ], [ %sel.i2, %loop ]
; CHECK: %acc.i3 = phi float [ %init.i3, %entry ], [ %sel.i3, %loop ]
; CHECK: %nexti = sub i32 %i, 1
; CHECK: %ptr = getelementptr <4 x float>, <4 x float>* %base, i32 %i
; CHECK: %ptr.i0 = bitcast <4 x float>* %ptr to float*
; CHECK: %val.i0 = load float, float* %ptr.i0, align 16
; CHECK: %ptr.i1 = getelementptr float, float* %ptr.i0, i32 1
; CHECK: %val.i1 = load float, float* %ptr.i1, align 4
; CHECK: %ptr.i2 = getelementptr float, float* %ptr.i0, i32 2
; CHECK: %val.i2 = load float, float* %ptr.i2, align 8
; CHECK: %ptr.i3 = getelementptr float, float* %ptr.i0, i32 3
; CHECK: %val.i3 = load float, float* %ptr.i3, align 4
; CHECK: %add.i0 = fadd float %val.i0, %val.i2
; CHECK: %add.i1 = fadd float %val.i1, %val.i3
; CHECK: %add.i2 = fadd float %acc.i0, %acc.i2
; CHECK: %add.i3 = fadd float %acc.i1, %acc.i3
; CHECK: %add.upto0 = insertelement <4 x float> undef, float %add.i0, i32 0
; CHECK: %add.upto1 = insertelement <4 x float> %add.upto0, float %add.i1, i32 1
; CHECK: %add.upto2 = insertelement <4 x float> %add.upto1, float %add.i2, i32 2
; CHECK: %add = insertelement <4 x float> %add.upto2, float %add.i3, i32 3
; CHECK: %call = call <4 x float> @ext(<4 x float> %add)
; CHECK: %call.i0 = extractelement <4 x float> %call, i32 0
; CHECK: %cmp.i0 = fcmp ogt float %call.i0, 1.0
; CHECK: %call.i1 = extractelement <4 x float> %call, i32 1
; CHECK: %cmp.i1 = fcmp ogt float %call.i1, 2.0
; CHECK: %call.i2 = extractelement <4 x float> %call, i32 2
; CHECK: %cmp.i2 = fcmp ogt float %call.i2, 3.0
; CHECK: %call.i3 = extractelement <4 x float> %call, i32 3
; CHECK: %cmp.i3 = fcmp ogt float %call.i3, 4.0
; CHECK: %sel.i0 = select i1 %cmp.i0, float %call.i0, float 5.0
; CHECK: %sel.i1 = select i1 %cmp.i1, float %call.i1, float 6.0
; CHECK: %sel.i2 = select i1 %cmp.i2, float %call.i2, float 7.0
; CHECK: %sel.i3 = select i1 %cmp.i3, float %call.i3, float 8.0
; CHECK: store float %sel.i0, float* %ptr.i0
; CHECK: store float %sel.i1, float* %ptr.i1
; CHECK: store float %sel.i2, float* %ptr.i2
; CHECK: store float %sel.i3, float* %ptr.i3
; CHECK: %test = icmp eq i32 %nexti, 0
; CHECK: br i1 %test, label %loop, label %exit
; CHECK: exit:
; CHECK: ret void
entry:
br label %loop
loop:
%i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
%acc = phi <4 x float> [ %init, %entry ], [ %sel, %loop ]
%nexti = sub i32 %i, 1
%ptr = getelementptr <4 x float>, <4 x float> *%base, i32 %i
%val = load <4 x float> , <4 x float> *%ptr
%dval = bitcast <4 x float> %val to <2 x double>
%dacc = bitcast <4 x float> %acc to <2 x double>
%shuffle1 = shufflevector <2 x double> %dval, <2 x double> %dacc,
<2 x i32> <i32 0, i32 2>
%shuffle2 = shufflevector <2 x double> %dval, <2 x double> %dacc,
<2 x i32> <i32 1, i32 3>
%f1 = bitcast <2 x double> %shuffle1 to <4 x float>
%f2 = bitcast <2 x double> %shuffle2 to <4 x float>
%add = fadd <4 x float> %f1, %f2
%call = call <4 x float> @ext(<4 x float> %add)
%cmp = fcmp ogt <4 x float> %call,
<float 1.0, float 2.0, float 3.0, float 4.0>
%sel = select <4 x i1> %cmp, <4 x float> %call,
<4 x float> <float 5.0, float 6.0, float 7.0, float 8.0>
store <4 x float> %sel, <4 x float> *%ptr
%test = icmp eq i32 %nexti, 0
br i1 %test, label %loop, label %exit
exit:
ret void
}
define void @f2(<4 x i32> %init, <4 x i8> *%base, i32 %count) {
; CHECK-LABEL: define void @f2(<4 x i32> %init, <4 x i8>* %base, i32 %count) {
; CHECK: entry:
; CHECK: %init.i0 = extractelement <4 x i32> %init, i32 0
; CHECK: %init.i1 = extractelement <4 x i32> %init, i32 1
; CHECK: %init.i2 = extractelement <4 x i32> %init, i32 2
; CHECK: %init.i3 = extractelement <4 x i32> %init, i32 3
; CHECK: br label %loop
; CHECK: loop:
; CHECK: %i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
; CHECK: %acc.i0 = phi i32 [ %init.i0, %entry ], [ %sel.i0, %loop ]
; CHECK: %acc.i1 = phi i32 [ %init.i1, %entry ], [ %sel.i1, %loop ]
; CHECK: %acc.i2 = phi i32 [ %init.i2, %entry ], [ %sel.i2, %loop ]
; CHECK: %acc.i3 = phi i32 [ %init.i3, %entry ], [ %sel.i3, %loop ]
; CHECK: %nexti = sub i32 %i, 1
; CHECK: %ptr = getelementptr <4 x i8>, <4 x i8>* %base, i32 %i
; CHECK: %ptr.i0 = bitcast <4 x i8>* %ptr to i8*
; CHECK: %val.i0 = load i8, i8* %ptr.i0, align 4
; CHECK: %ptr.i1 = getelementptr i8, i8* %ptr.i0, i32 1
; CHECK: %val.i1 = load i8, i8* %ptr.i1, align 1
; CHECK: %ptr.i2 = getelementptr i8, i8* %ptr.i0, i32 2
; CHECK: %val.i2 = load i8, i8* %ptr.i2, align 2
; CHECK: %ptr.i3 = getelementptr i8, i8* %ptr.i0, i32 3
; CHECK: %val.i3 = load i8, i8* %ptr.i3, align 1
; CHECK: %ext.i0 = sext i8 %val.i0 to i32
; CHECK: %ext.i1 = sext i8 %val.i1 to i32
; CHECK: %ext.i2 = sext i8 %val.i2 to i32
; CHECK: %ext.i3 = sext i8 %val.i3 to i32
; CHECK: %add.i0 = add i32 %ext.i0, %acc.i0
; CHECK: %add.i1 = add i32 %ext.i1, %acc.i1
; CHECK: %add.i2 = add i32 %ext.i2, %acc.i2
; CHECK: %add.i3 = add i32 %ext.i3, %acc.i3
; CHECK: %cmp.i0 = icmp slt i32 %add.i0, -10
; CHECK: %cmp.i1 = icmp slt i32 %add.i1, -11
; CHECK: %cmp.i2 = icmp slt i32 %add.i2, -12
; CHECK: %cmp.i3 = icmp slt i32 %add.i3, -13
; CHECK: %sel.i0 = select i1 %cmp.i0, i32 %add.i0, i32 %i
; CHECK: %sel.i1 = select i1 %cmp.i1, i32 %add.i1, i32 %i
; CHECK: %sel.i2 = select i1 %cmp.i2, i32 %add.i2, i32 %i
; CHECK: %sel.i3 = select i1 %cmp.i3, i32 %add.i3, i32 %i
; CHECK: %trunc.i0 = trunc i32 %sel.i0 to i8
; CHECK: %trunc.i1 = trunc i32 %sel.i1 to i8
; CHECK: %trunc.i2 = trunc i32 %sel.i2 to i8
; CHECK: %trunc.i3 = trunc i32 %sel.i3 to i8
; CHECK: store i8 %trunc.i0, i8* %ptr.i0, align 4
; CHECK: store i8 %trunc.i1, i8* %ptr.i1, align 1
; CHECK: store i8 %trunc.i2, i8* %ptr.i2, align 2
; CHECK: store i8 %trunc.i3, i8* %ptr.i3, align 1
; CHECK: %test = icmp eq i32 %nexti, 0
; CHECK: br i1 %test, label %loop, label %exit
; CHECK: exit:
; CHECK: ret void
entry:
br label %loop
loop:
%i = phi i32 [ %count, %entry ], [ %nexti, %loop ]
%acc = phi <4 x i32> [ %init, %entry ], [ %sel, %loop ]
%nexti = sub i32 %i, 1
%ptr = getelementptr <4 x i8>, <4 x i8> *%base, i32 %i
%val = load <4 x i8> , <4 x i8> *%ptr
%ext = sext <4 x i8> %val to <4 x i32>
%add = add <4 x i32> %ext, %acc
%cmp = icmp slt <4 x i32> %add, <i32 -10, i32 -11, i32 -12, i32 -13>
%single = insertelement <4 x i32> undef, i32 %i, i32 0
%limit = shufflevector <4 x i32> %single, <4 x i32> undef,
<4 x i32> zeroinitializer
%sel = select <4 x i1> %cmp, <4 x i32> %add, <4 x i32> %limit
%trunc = trunc <4 x i32> %sel to <4 x i8>
store <4 x i8> %trunc, <4 x i8> *%ptr
%test = icmp eq i32 %nexti, 0
br i1 %test, label %loop, label %exit
exit:
ret void
}
; Check that !tbaa information is preserved.
define void @f3(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f3(
; CHECK: %val.i0 = load i32, i32* %src.i0, align 16, !tbaa ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32, i32* %src.i1, align 4, !tbaa ![[TAG]]
; CHECK: %val.i2 = load i32, i32* %src.i2, align 8, !tbaa ![[TAG]]
; CHECK: %val.i3 = load i32, i32* %src.i3, align 4, !tbaa ![[TAG]]
; CHECK: store i32 %add.i0, i32* %dst.i0, align 16, !tbaa ![[TAG:[0-9]*]]
; CHECK: store i32 %add.i1, i32* %dst.i1, align 4, !tbaa ![[TAG]]
; CHECK: store i32 %add.i2, i32* %dst.i2, align 8, !tbaa ![[TAG]]
; CHECK: store i32 %add.i3, i32* %dst.i3, align 4, !tbaa ![[TAG]]
; CHECK: ret void
%val = load <4 x i32> , <4 x i32> *%src, !tbaa !1
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !tbaa !2
ret void
}
; Check that !tbaa.struct information is preserved.
define void @f4(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f4(
; CHECK: %val.i0 = load i32, i32* %src.i0, align 16, !tbaa.struct ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32, i32* %src.i1, align 4, !tbaa.struct ![[TAG]]
; CHECK: %val.i2 = load i32, i32* %src.i2, align 8, !tbaa.struct ![[TAG]]
; CHECK: %val.i3 = load i32, i32* %src.i3, align 4, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i0, i32* %dst.i0, align 16, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i1, i32* %dst.i1, align 4, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i2, i32* %dst.i2, align 8, !tbaa.struct ![[TAG]]
; CHECK: store i32 %add.i3, i32* %dst.i3, align 4, !tbaa.struct ![[TAG]]
; CHECK: ret void
%val = load <4 x i32> , <4 x i32> *%src, !tbaa.struct !5
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !tbaa.struct !5
ret void
}
; Check that llvm.mem.parallel_loop_access information is preserved.
define void @f5(i32 %count, <4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f5(
; CHECK: %val.i0 = load i32, i32* %this_src.i0, align 16, !llvm.mem.parallel_loop_access ![[TAG:[0-9]*]]
; CHECK: %val.i1 = load i32, i32* %this_src.i1, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: %val.i2 = load i32, i32* %this_src.i2, align 8, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: %val.i3 = load i32, i32* %this_src.i3, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i0, i32* %this_dst.i0, align 16, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i1, i32* %this_dst.i1, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i2, i32* %this_dst.i2, align 8, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: store i32 %add.i3, i32* %this_dst.i3, align 4, !llvm.mem.parallel_loop_access ![[TAG]]
; CHECK: ret void
entry:
br label %loop
loop:
%index = phi i32 [ 0, %entry ], [ %next_index, %loop ]
%this_src = getelementptr <4 x i32>, <4 x i32> *%src, i32 %index
%this_dst = getelementptr <4 x i32>, <4 x i32> *%dst, i32 %index
%val = load <4 x i32> , <4 x i32> *%this_src, !llvm.mem.parallel_loop_access !3
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%this_dst, !llvm.mem.parallel_loop_access !3
%next_index = add i32 %index, -1
%continue = icmp ne i32 %next_index, %count
br i1 %continue, label %loop, label %end, !llvm.loop !3
end:
ret void
}
; Check that fpmath information is preserved.
define <4 x float> @f6(<4 x float> %x) {
; CHECK-LABEL: @f6(
; CHECK: %x.i0 = extractelement <4 x float> %x, i32 0
; CHECK: %res.i0 = fadd float %x.i0, 1.0{{[e+0]*}}, !fpmath ![[TAG:[0-9]*]]
; CHECK: %x.i1 = extractelement <4 x float> %x, i32 1
; CHECK: %res.i1 = fadd float %x.i1, 2.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %x.i2 = extractelement <4 x float> %x, i32 2
; CHECK: %res.i2 = fadd float %x.i2, 3.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %x.i3 = extractelement <4 x float> %x, i32 3
; CHECK: %res.i3 = fadd float %x.i3, 4.0{{[e+0]*}}, !fpmath ![[TAG]]
; CHECK: %res.upto0 = insertelement <4 x float> undef, float %res.i0, i32 0
; CHECK: %res.upto1 = insertelement <4 x float> %res.upto0, float %res.i1, i32 1
; CHECK: %res.upto2 = insertelement <4 x float> %res.upto1, float %res.i2, i32 2
; CHECK: %res = insertelement <4 x float> %res.upto2, float %res.i3, i32 3
; CHECK: ret <4 x float> %res
%res = fadd <4 x float> %x, <float 1.0, float 2.0, float 3.0, float 4.0>,
!fpmath !4
ret <4 x float> %res
}
; Check that random metadata isn't kept.
define void @f7(<4 x i32> *%src, <4 x i32> *%dst) {
; CHECK-LABEL: @f7(
; CHECK-NOT: !foo
; CHECK: ret void
%val = load <4 x i32> , <4 x i32> *%src, !foo !5
%add = add <4 x i32> %val, %val
store <4 x i32> %add, <4 x i32> *%dst, !foo !5
ret void
}
; Test GEP with vectors.
define void @f8(<4 x float *> *%dest, <4 x float *> %ptr0, <4 x i32> %i0,
float *%other) {
; CHECK-LABEL: @f8(
; CHECK: %dest.i0 = bitcast <4 x float*>* %dest to float**
; CHECK: %dest.i1 = getelementptr float*, float** %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float*, float** %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float*, float** %dest.i0, i32 3
; CHECK: %i0.i1 = extractelement <4 x i32> %i0, i32 1
; CHECK: %i0.i3 = extractelement <4 x i32> %i0, i32 3
; CHECK: %ptr0.i0 = extractelement <4 x float*> %ptr0, i32 0
; CHECK: %val.i0 = getelementptr float, float* %ptr0.i0, i32 100
; CHECK: %val.i1 = getelementptr float, float* %other, i32 %i0.i1
; CHECK: %ptr0.i2 = extractelement <4 x float*> %ptr0, i32 2
; CHECK: %val.i2 = getelementptr float, float* %ptr0.i2, i32 100
; CHECK: %ptr0.i3 = extractelement <4 x float*> %ptr0, i32 3
; CHECK: %val.i3 = getelementptr float, float* %ptr0.i3, i32 %i0.i3
; CHECK: store float* %val.i0, float** %dest.i0, align 32
; CHECK: store float* %val.i1, float** %dest.i1, align 8
; CHECK: store float* %val.i2, float** %dest.i2, align 16
; CHECK: store float* %val.i3, float** %dest.i3, align 8
; CHECK: ret void
%i1 = insertelement <4 x i32> %i0, i32 100, i32 0
%i2 = insertelement <4 x i32> %i1, i32 100, i32 2
%ptr1 = insertelement <4 x float *> %ptr0, float *%other, i32 1
%val = getelementptr float, <4 x float *> %ptr1, <4 x i32> %i2
store <4 x float *> %val, <4 x float *> *%dest
ret void
}
; Test the handling of unaligned loads.
define void @f9(<4 x float> *%dest, <4 x float> *%src) {
; CHECK: @f9(
; CHECK: %dest.i0 = bitcast <4 x float>* %dest to float*
; CHECK: %dest.i1 = getelementptr float, float* %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float, float* %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float, float* %dest.i0, i32 3
; CHECK: %src.i0 = bitcast <4 x float>* %src to float*
; CHECK: %val.i0 = load float, float* %src.i0, align 4
; CHECK: %src.i1 = getelementptr float, float* %src.i0, i32 1
; CHECK: %val.i1 = load float, float* %src.i1, align 4
; CHECK: %src.i2 = getelementptr float, float* %src.i0, i32 2
; CHECK: %val.i2 = load float, float* %src.i2, align 4
; CHECK: %src.i3 = getelementptr float, float* %src.i0, i32 3
; CHECK: %val.i3 = load float, float* %src.i3, align 4
; CHECK: store float %val.i0, float* %dest.i0, align 8
; CHECK: store float %val.i1, float* %dest.i1, align 4
; CHECK: store float %val.i2, float* %dest.i2, align 8
; CHECK: store float %val.i3, float* %dest.i3, align 4
; CHECK: ret void
%val = load <4 x float> , <4 x float> *%src, align 4
store <4 x float> %val, <4 x float> *%dest, align 8
ret void
}
; ...and again with subelement alignment.
define void @f10(<4 x float> *%dest, <4 x float> *%src) {
; CHECK: @f10(
; CHECK: %dest.i0 = bitcast <4 x float>* %dest to float*
; CHECK: %dest.i1 = getelementptr float, float* %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float, float* %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float, float* %dest.i0, i32 3
; CHECK: %src.i0 = bitcast <4 x float>* %src to float*
; CHECK: %val.i0 = load float, float* %src.i0, align 1
; CHECK: %src.i1 = getelementptr float, float* %src.i0, i32 1
; CHECK: %val.i1 = load float, float* %src.i1, align 1
; CHECK: %src.i2 = getelementptr float, float* %src.i0, i32 2
; CHECK: %val.i2 = load float, float* %src.i2, align 1
; CHECK: %src.i3 = getelementptr float, float* %src.i0, i32 3
; CHECK: %val.i3 = load float, float* %src.i3, align 1
; CHECK: store float %val.i0, float* %dest.i0, align 2
; CHECK: store float %val.i1, float* %dest.i1, align 2
; CHECK: store float %val.i2, float* %dest.i2, align 2
; CHECK: store float %val.i3, float* %dest.i3, align 2
; CHECK: ret void
%val = load <4 x float> , <4 x float> *%src, align 1
store <4 x float> %val, <4 x float> *%dest, align 2
ret void
}
; Test that sub-byte loads aren't scalarized.
define void @f11(<32 x i1> *%dest, <32 x i1> *%src0) {
; CHECK: @f11(
; CHECK: %val0 = load <32 x i1>, <32 x i1>* %src0
; CHECK: %val1 = load <32 x i1>, <32 x i1>* %src1
; CHECK: store <32 x i1> %and, <32 x i1>* %dest
; CHECK: ret void
%src1 = getelementptr <32 x i1>, <32 x i1> *%src0, i32 1
%val0 = load <32 x i1> , <32 x i1> *%src0
%val1 = load <32 x i1> , <32 x i1> *%src1
%and = and <32 x i1> %val0, %val1
store <32 x i1> %and, <32 x i1> *%dest
ret void
}
; Test that variable inserts aren't scalarized.
define void @f12(<4 x i32> *%dest, <4 x i32> *%src, i32 %index) {
; CHECK: @f12(
; CHECK: %val1 = insertelement <4 x i32> %val0, i32 1, i32 %index
; CHECK-DAG: %val1.i0 = extractelement <4 x i32> %val1, i32 0
; CHECK-DAG: %val1.i1 = extractelement <4 x i32> %val1, i32 1
; CHECK-DAG: %val1.i2 = extractelement <4 x i32> %val1, i32 2
; CHECK-DAG: %val1.i3 = extractelement <4 x i32> %val1, i32 3
; CHECK-DAG: %val2.i0 = shl i32 1, %val1.i0
; CHECK-DAG: %val2.i1 = shl i32 2, %val1.i1
; CHECK-DAG: %val2.i2 = shl i32 3, %val1.i2
; CHECK-DAG: %val2.i3 = shl i32 4, %val1.i3
; CHECK: ret void
%val0 = load <4 x i32> , <4 x i32> *%src
%val1 = insertelement <4 x i32> %val0, i32 1, i32 %index
%val2 = shl <4 x i32> <i32 1, i32 2, i32 3, i32 4>, %val1
store <4 x i32> %val2, <4 x i32> *%dest
ret void
}
; Test vector GEPs with more than one index.
define void @f13(<4 x float *> *%dest, <4 x [4 x float] *> %ptr, <4 x i32> %i,
float *%other) {
; CHECK-LABEL: @f13(
; CHECK: %dest.i0 = bitcast <4 x float*>* %dest to float**
; CHECK: %dest.i1 = getelementptr float*, float** %dest.i0, i32 1
; CHECK: %dest.i2 = getelementptr float*, float** %dest.i0, i32 2
; CHECK: %dest.i3 = getelementptr float*, float** %dest.i0, i32 3
; CHECK: %i.i0 = extractelement <4 x i32> %i, i32 0
; CHECK: %ptr.i0 = extractelement <4 x [4 x float]*> %ptr, i32 0
; CHECK: %val.i0 = getelementptr inbounds [4 x float], [4 x float]* %ptr.i0, i32 0, i32 %i.i0
; CHECK: %i.i1 = extractelement <4 x i32> %i, i32 1
; CHECK: %ptr.i1 = extractelement <4 x [4 x float]*> %ptr, i32 1
; CHECK: %val.i1 = getelementptr inbounds [4 x float], [4 x float]* %ptr.i1, i32 1, i32 %i.i1
; CHECK: %i.i2 = extractelement <4 x i32> %i, i32 2
; CHECK: %ptr.i2 = extractelement <4 x [4 x float]*> %ptr, i32 2
; CHECK: %val.i2 = getelementptr inbounds [4 x float], [4 x float]* %ptr.i2, i32 2, i32 %i.i2
; CHECK: %i.i3 = extractelement <4 x i32> %i, i32 3
; CHECK: %ptr.i3 = extractelement <4 x [4 x float]*> %ptr, i32 3
; CHECK: %val.i3 = getelementptr inbounds [4 x float], [4 x float]* %ptr.i3, i32 3, i32 %i.i3
; CHECK: store float* %val.i0, float** %dest.i0, align 32
; CHECK: store float* %val.i1, float** %dest.i1, align 8
; CHECK: store float* %val.i2, float** %dest.i2, align 16
; CHECK: store float* %val.i3, float** %dest.i3, align 8
; CHECK: ret void
%val = getelementptr inbounds [4 x float], <4 x [4 x float] *> %ptr,
<4 x i32> <i32 0, i32 1, i32 2, i32 3>,
<4 x i32> %i
store <4 x float *> %val, <4 x float *> *%dest
ret void
}
; Test combinations of vector and non-vector PHIs.
define <4 x float> @f14(<4 x float> %acc, i32 %count) {
; CHECK-LABEL: @f14(
; CHECK: %this_acc.i0 = phi float [ %acc.i0, %entry ], [ %next_acc.i0, %loop ]
; CHECK: %this_acc.i1 = phi float [ %acc.i1, %entry ], [ %next_acc.i1, %loop ]
; CHECK: %this_acc.i2 = phi float [ %acc.i2, %entry ], [ %next_acc.i2, %loop ]
; CHECK: %this_acc.i3 = phi float [ %acc.i3, %entry ], [ %next_acc.i3, %loop ]
; CHECK: %this_count = phi i32 [ %count, %entry ], [ %next_count, %loop ]
; CHECK: %this_acc.upto0 = insertelement <4 x float> undef, float %this_acc.i0, i32 0
; CHECK: %this_acc.upto1 = insertelement <4 x float> %this_acc.upto0, float %this_acc.i1, i32 1
; CHECK: %this_acc.upto2 = insertelement <4 x float> %this_acc.upto1, float %this_acc.i2, i32 2
; CHECK: %this_acc = insertelement <4 x float> %this_acc.upto2, float %this_acc.i3, i32 3
; CHECK: ret <4 x float> %next_acc
entry:
br label %loop
loop:
%this_acc = phi <4 x float> [ %acc, %entry ], [ %next_acc, %loop ]
%this_count = phi i32 [ %count, %entry ], [ %next_count, %loop ]
%foo = call <4 x float> @ext(<4 x float> %this_acc)
%next_acc = fadd <4 x float> %this_acc, %foo
%next_count = sub i32 %this_count, 1
%cmp = icmp eq i32 %next_count, 0
br i1 %cmp, label %loop, label %exit
exit:
ret <4 x float> %next_acc
}
!0 = !{ !"root" }
!1 = !{ !"set1", !0 }
!2 = !{ !"set2", !0 }
!3 = !{ !3 }
!4 = !{ float 4.0 }
!5 = !{ i64 0, i64 8, null }