llvm-6502/lib/Target/ARM/ARMInstrThumb2.td
2009-08-07 21:19:10 +00:00

1132 lines
48 KiB
TableGen

//===- ARMInstrThumb2.td - Thumb2 support for ARM -------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the Thumb2 instruction set.
//
//===----------------------------------------------------------------------===//
// IT block predicate field
def it_pred : Operand<i32> {
let PrintMethod = "printPredicateOperand";
}
// IT block condition mask
def it_mask : Operand<i32> {
let PrintMethod = "printThumbITMask";
}
// Table branch address
def tb_addrmode : Operand<i32> {
let PrintMethod = "printTBAddrMode";
}
// Shifted operands. No register controlled shifts for Thumb2.
// Note: We do not support rrx shifted operands yet.
def t2_so_reg : Operand<i32>, // reg imm
ComplexPattern<i32, 2, "SelectT2ShifterOperandReg",
[shl,srl,sra,rotr]> {
let PrintMethod = "printT2SOOperand";
let MIOperandInfo = (ops GPR, i32imm);
}
// t2_so_imm_not_XFORM - Return the complement of a t2_so_imm value
def t2_so_imm_not_XFORM : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant(~((uint32_t)N->getZExtValue()), MVT::i32);
}]>;
// t2_so_imm_neg_XFORM - Return the negation of a t2_so_imm value
def t2_so_imm_neg_XFORM : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant(-((int)N->getZExtValue()), MVT::i32);
}]>;
// t2_so_imm - Match a 32-bit immediate operand, which is an
// 8-bit immediate rotated by an arbitrary number of bits, or an 8-bit
// immediate splatted into multiple bytes of the word. t2_so_imm values are
// represented in the imm field in the same 12-bit form that they are encoded
// into t2_so_imm instructions: the 8-bit immediate is the least significant bits
// [bits 0-7], the 4-bit shift/splat amount is the next 4 bits [bits 8-11].
def t2_so_imm : Operand<i32>,
PatLeaf<(imm), [{
return ARM_AM::getT2SOImmVal((uint32_t)N->getZExtValue()) != -1;
}]>;
// t2_so_imm_not - Match an immediate that is a complement
// of a t2_so_imm.
def t2_so_imm_not : Operand<i32>,
PatLeaf<(imm), [{
return ARM_AM::getT2SOImmVal(~((uint32_t)N->getZExtValue())) != -1;
}], t2_so_imm_not_XFORM>;
// t2_so_imm_neg - Match an immediate that is a negation of a t2_so_imm.
def t2_so_imm_neg : Operand<i32>,
PatLeaf<(imm), [{
return ARM_AM::getT2SOImmVal(-((int)N->getZExtValue())) != -1;
}], t2_so_imm_neg_XFORM>;
/// imm1_31 predicate - True if the 32-bit immediate is in the range [1,31].
def imm1_31 : PatLeaf<(i32 imm), [{
return (int32_t)N->getZExtValue() >= 1 && (int32_t)N->getZExtValue() < 32;
}]>;
/// imm0_4095 predicate - True if the 32-bit immediate is in the range [0.4095].
def imm0_4095 : Operand<i32>,
PatLeaf<(i32 imm), [{
return (uint32_t)N->getZExtValue() < 4096;
}]>;
def imm0_4095_neg : PatLeaf<(i32 imm), [{
return (uint32_t)(-N->getZExtValue()) < 4096;
}], imm_neg_XFORM>;
def imm0_255_neg : PatLeaf<(i32 imm), [{
return (uint32_t)(-N->getZExtValue()) < 255;
}], imm_neg_XFORM>;
/// imm0_65535 predicate - True if the 32-bit immediate is in the range
/// [0.65535].
def imm0_65535 : PatLeaf<(i32 imm), [{
return (uint32_t)N->getZExtValue() < 65536;
}]>;
/// Split a 32-bit immediate into two 16 bit parts.
def t2_lo16 : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant((uint32_t)N->getZExtValue() & 0xffff,
MVT::i32);
}]>;
def t2_hi16 : SDNodeXForm<imm, [{
return CurDAG->getTargetConstant((uint32_t)N->getZExtValue() >> 16, MVT::i32);
}]>;
def t2_lo16AllZero : PatLeaf<(i32 imm), [{
// Returns true if all low 16-bits are 0.
return (((uint32_t)N->getZExtValue()) & 0xFFFFUL) == 0;
}], t2_hi16>;
// Define Thumb2 specific addressing modes.
// t2addrmode_imm12 := reg + imm12
def t2addrmode_imm12 : Operand<i32>,
ComplexPattern<i32, 2, "SelectT2AddrModeImm12", []> {
let PrintMethod = "printT2AddrModeImm12Operand";
let MIOperandInfo = (ops GPR:$base, i32imm:$offsimm);
}
// t2addrmode_imm8 := reg - imm8
def t2addrmode_imm8 : Operand<i32>,
ComplexPattern<i32, 2, "SelectT2AddrModeImm8", []> {
let PrintMethod = "printT2AddrModeImm8Operand";
let MIOperandInfo = (ops GPR:$base, i32imm:$offsimm);
}
def t2am_imm8_offset : Operand<i32>,
ComplexPattern<i32, 1, "SelectT2AddrModeImm8Offset", []>{
let PrintMethod = "printT2AddrModeImm8OffsetOperand";
}
// t2addrmode_imm8s4 := reg +/- (imm8 << 2)
def t2addrmode_imm8s4 : Operand<i32>,
ComplexPattern<i32, 2, "SelectT2AddrModeImm8s4", []> {
let PrintMethod = "printT2AddrModeImm8s4Operand";
let MIOperandInfo = (ops GPR:$base, i32imm:$offsimm);
}
// t2addrmode_so_reg := reg + (reg << imm2)
def t2addrmode_so_reg : Operand<i32>,
ComplexPattern<i32, 3, "SelectT2AddrModeSoReg", []> {
let PrintMethod = "printT2AddrModeSoRegOperand";
let MIOperandInfo = (ops GPR:$base, GPR:$offsreg, i32imm:$offsimm);
}
//===----------------------------------------------------------------------===//
// Multiclass helpers...
//
/// T2I_un_irs - Defines a set of (op reg, {so_imm|r|so_reg}) patterns for a
/// unary operation that produces a value. These are predicable and can be
/// changed to modify CPSR.
multiclass T2I_un_irs<string opc, PatFrag opnode, bit Cheap = 0, bit ReMat = 0>{
// shifted imm
def i : T2sI<(outs GPR:$dst), (ins t2_so_imm:$src), IIC_iALU,
opc, " $dst, $src",
[(set GPR:$dst, (opnode t2_so_imm:$src))]> {
let isAsCheapAsAMove = Cheap;
let isReMaterializable = ReMat;
}
// register
def r : T2I<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
opc, ".w $dst, $src",
[(set GPR:$dst, (opnode GPR:$src))]>;
// shifted register
def s : T2I<(outs GPR:$dst), (ins t2_so_reg:$src), IIC_iALU,
opc, ".w $dst, $src",
[(set GPR:$dst, (opnode t2_so_reg:$src))]>;
}
/// T2I_bin_irs - Defines a set of (op reg, {so_imm|r|so_reg}) patterns for a
// binary operation that produces a value. These are predicable and can be
/// changed to modify CPSR.
multiclass T2I_bin_irs<string opc, PatFrag opnode,
bit Commutable = 0, string wide =""> {
// shifted imm
def ri : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
opc, " $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_imm:$rhs))]>;
// register
def rr : T2sI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
opc, !strconcat(wide, " $dst, $lhs, $rhs"),
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]> {
let isCommutable = Commutable;
}
// shifted register
def rs : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
opc, !strconcat(wide, " $dst, $lhs, $rhs"),
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_reg:$rhs))]>;
}
/// T2I_bin_w_irs - Same as T2I_bin_irs except these operations need
// the ".w" prefix to indicate that they are wide.
multiclass T2I_bin_w_irs<string opc, PatFrag opnode, bit Commutable = 0> :
T2I_bin_irs<opc, opnode, Commutable, ".w">;
/// T2I_rbin_is - Same as T2I_bin_irs except the order of operands are
/// reversed. It doesn't define the 'rr' form since it's handled by its
/// T2I_bin_irs counterpart.
multiclass T2I_rbin_is<string opc, PatFrag opnode> {
// shifted imm
def ri : T2I<(outs GPR:$dst), (ins GPR:$rhs, t2_so_imm:$lhs), IIC_iALU,
opc, ".w $dst, $rhs, $lhs",
[(set GPR:$dst, (opnode t2_so_imm:$lhs, GPR:$rhs))]>;
// shifted register
def rs : T2I<(outs GPR:$dst), (ins GPR:$rhs, t2_so_reg:$lhs), IIC_iALU,
opc, " $dst, $rhs, $lhs",
[(set GPR:$dst, (opnode t2_so_reg:$lhs, GPR:$rhs))]>;
}
/// T2I_bin_s_irs - Similar to T2I_bin_irs except it sets the 's' bit so the
/// instruction modifies the CPSR register.
let Defs = [CPSR] in {
multiclass T2I_bin_s_irs<string opc, PatFrag opnode, bit Commutable = 0> {
// shifted imm
def ri : T2I<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
!strconcat(opc, "s"), ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_imm:$rhs))]>;
// register
def rr : T2I<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
!strconcat(opc, "s"), ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]> {
let isCommutable = Commutable;
}
// shifted register
def rs : T2I<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
!strconcat(opc, "s"), ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_reg:$rhs))]>;
}
}
/// T2I_bin_ii12rs - Defines a set of (op reg, {so_imm|imm0_4095|r|so_reg})
/// patterns for a binary operation that produces a value.
multiclass T2I_bin_ii12rs<string opc, PatFrag opnode, bit Commutable = 0> {
// shifted imm
def ri : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_imm:$rhs))]>;
// 12-bit imm
def ri12 : T2sI<(outs GPR:$dst), (ins GPR:$lhs, imm0_4095:$rhs), IIC_iALU,
!strconcat(opc, "w"), " $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, imm0_4095:$rhs))]>;
// register
def rr : T2sI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]> {
let isCommutable = Commutable;
}
// shifted register
def rs : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_reg:$rhs))]>;
}
/// T2I_adde_sube_irs - Defines a set of (op reg, {so_imm|r|so_reg}) patterns for a
/// binary operation that produces a value and use and define the carry bit.
/// It's not predicable.
let Uses = [CPSR] in {
multiclass T2I_adde_sube_irs<string opc, PatFrag opnode, bit Commutable = 0> {
// shifted imm
def ri : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
opc, " $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_imm:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUnused]>;
// register
def rr : T2sI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUnused]> {
let isCommutable = Commutable;
}
// shifted register
def rs : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_reg:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUnused]>;
// Carry setting variants
// shifted imm
def Sri : T2XI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
!strconcat(opc, "s $dst, $lhs, $rhs"),
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_imm:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUsed]> {
let Defs = [CPSR];
}
// register
def Srr : T2XI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
!strconcat(opc, "s.w $dst, $lhs, $rhs"),
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUsed]> {
let Defs = [CPSR];
let isCommutable = Commutable;
}
// shifted register
def Srs : T2XI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
!strconcat(opc, "s.w $dst, $lhs, $rhs"),
[(set GPR:$dst, (opnode GPR:$lhs, t2_so_reg:$rhs))]>,
Requires<[IsThumb2, CarryDefIsUsed]> {
let Defs = [CPSR];
}
}
}
/// T2I_rbin_s_is - Same as T2I_rbin_is except sets 's' bit.
let Defs = [CPSR] in {
multiclass T2I_rbin_s_is<string opc, PatFrag opnode> {
// shifted imm
def ri : T2XI<(outs GPR:$dst), (ins GPR:$rhs, t2_so_imm:$lhs, cc_out:$s), IIC_iALU,
!strconcat(opc, "${s}.w $dst, $rhs, $lhs"),
[(set GPR:$dst, (opnode t2_so_imm:$lhs, GPR:$rhs))]>;
// shifted register
def rs : T2XI<(outs GPR:$dst), (ins GPR:$rhs, t2_so_reg:$lhs, cc_out:$s), IIC_iALU,
!strconcat(opc, "${s} $dst, $rhs, $lhs"),
[(set GPR:$dst, (opnode t2_so_reg:$lhs, GPR:$rhs))]>;
}
}
/// T2I_sh_ir - Defines a set of (op reg, {so_imm|r}) patterns for a shift /
// rotate operation that produces a value.
multiclass T2I_sh_ir<string opc, PatFrag opnode> {
// 5-bit imm
def ri : T2sI<(outs GPR:$dst), (ins GPR:$lhs, i32imm:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, imm1_31:$rhs))]>;
// register
def rr : T2sI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
opc, ".w $dst, $lhs, $rhs",
[(set GPR:$dst, (opnode GPR:$lhs, GPR:$rhs))]>;
}
/// T21_cmp_irs - Defines a set of (op r, {so_imm|r|so_reg}) cmp / test
/// patterns. Similar to T2I_bin_irs except the instruction does not produce
/// a explicit result, only implicitly set CPSR.
let Defs = [CPSR] in {
multiclass T2I_cmp_is<string opc, PatFrag opnode> {
// shifted imm
def ri : T2I<(outs), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
opc, ".w $lhs, $rhs",
[(opnode GPR:$lhs, t2_so_imm:$rhs)]>;
// register
def rr : T2I<(outs), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
opc, ".w $lhs, $rhs",
[(opnode GPR:$lhs, GPR:$rhs)]>;
// shifted register
def rs : T2I<(outs), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
opc, ".w $lhs, $rhs",
[(opnode GPR:$lhs, t2_so_reg:$rhs)]>;
}
}
/// T2I_ld - Defines a set of (op r, {imm12|imm8|so_reg}) load patterns.
multiclass T2I_ld<string opc, PatFrag opnode> {
def i12 : T2Ii12<(outs GPR:$dst), (ins t2addrmode_imm12:$addr), IIC_iLoad,
opc, ".w $dst, $addr",
[(set GPR:$dst, (opnode t2addrmode_imm12:$addr))]>;
def i8 : T2Ii8 <(outs GPR:$dst), (ins t2addrmode_imm8:$addr), IIC_iLoad,
opc, " $dst, $addr",
[(set GPR:$dst, (opnode t2addrmode_imm8:$addr))]>;
def s : T2Iso <(outs GPR:$dst), (ins t2addrmode_so_reg:$addr), IIC_iLoad,
opc, ".w $dst, $addr",
[(set GPR:$dst, (opnode t2addrmode_so_reg:$addr))]>;
def pci : T2Ipc <(outs GPR:$dst), (ins i32imm:$addr), IIC_iLoad,
opc, ".w $dst, $addr",
[(set GPR:$dst, (opnode (ARMWrapper tconstpool:$addr)))]>;
}
/// T2I_st - Defines a set of (op r, {imm12|imm8|so_reg}) store patterns.
multiclass T2I_st<string opc, PatFrag opnode> {
def i12 : T2Ii12<(outs), (ins GPR:$src, t2addrmode_imm12:$addr), IIC_iStore,
opc, ".w $src, $addr",
[(opnode GPR:$src, t2addrmode_imm12:$addr)]>;
def i8 : T2Ii8 <(outs), (ins GPR:$src, t2addrmode_imm8:$addr), IIC_iStore,
opc, " $src, $addr",
[(opnode GPR:$src, t2addrmode_imm8:$addr)]>;
def s : T2Iso <(outs), (ins GPR:$src, t2addrmode_so_reg:$addr), IIC_iStore,
opc, ".w $src, $addr",
[(opnode GPR:$src, t2addrmode_so_reg:$addr)]>;
}
/// T2I_picld - Defines the PIC load pattern.
class T2I_picld<string opc, PatFrag opnode> :
T2I<(outs GPR:$dst), (ins addrmodepc:$addr), IIC_iLoad,
!strconcat("${addr:label}:\n\t", opc), " $dst, $addr",
[(set GPR:$dst, (opnode addrmodepc:$addr))]>;
/// T2I_picst - Defines the PIC store pattern.
class T2I_picst<string opc, PatFrag opnode> :
T2I<(outs), (ins GPR:$src, addrmodepc:$addr), IIC_iStore,
!strconcat("${addr:label}:\n\t", opc), " $src, $addr",
[(opnode GPR:$src, addrmodepc:$addr)]>;
/// T2I_unary_rrot - A unary operation with two forms: one whose operand is a
/// register and one whose operand is a register rotated by 8/16/24.
multiclass T2I_unary_rrot<string opc, PatFrag opnode> {
def r : T2I<(outs GPR:$dst), (ins GPR:$Src), IIC_iALU,
opc, ".w $dst, $Src",
[(set GPR:$dst, (opnode GPR:$Src))]>;
def r_rot : T2I<(outs GPR:$dst), (ins GPR:$Src, i32imm:$rot), IIC_iALU,
opc, ".w $dst, $Src, ror $rot",
[(set GPR:$dst, (opnode (rotr GPR:$Src, rot_imm:$rot)))]>;
}
/// T2I_bin_rrot - A binary operation with two forms: one whose operand is a
/// register and one whose operand is a register rotated by 8/16/24.
multiclass T2I_bin_rrot<string opc, PatFrag opnode> {
def rr : T2I<(outs GPR:$dst), (ins GPR:$LHS, GPR:$RHS), IIC_iALU,
opc, " $dst, $LHS, $RHS",
[(set GPR:$dst, (opnode GPR:$LHS, GPR:$RHS))]>;
def rr_rot : T2I<(outs GPR:$dst), (ins GPR:$LHS, GPR:$RHS, i32imm:$rot),
IIC_iALU, opc, " $dst, $LHS, $RHS, ror $rot",
[(set GPR:$dst, (opnode GPR:$LHS,
(rotr GPR:$RHS, rot_imm:$rot)))]>;
}
//===----------------------------------------------------------------------===//
// Instructions
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Miscellaneous Instructions.
//
// LEApcrel - Load a pc-relative address into a register without offending the
// assembler.
def t2LEApcrel : T2XI<(outs GPR:$dst), (ins i32imm:$label, pred:$p), IIC_iALU,
"adr$p.w $dst, #$label", []>;
def t2LEApcrelJT : T2XI<(outs GPR:$dst),
(ins i32imm:$label, i32imm:$id, pred:$p), IIC_iALU,
"adr$p.w $dst, #${label}_${id:no_hash}", []>;
// ADD r, sp, {so_imm|i12}
def t2ADDrSPi : T2sI<(outs GPR:$dst), (ins GPR:$sp, t2_so_imm:$imm), IIC_iALU,
"add", ".w $dst, $sp, $imm", []>;
def t2ADDrSPi12 : T2I<(outs GPR:$dst), (ins GPR:$sp, imm0_4095:$imm), IIC_iALU,
"addw", " $dst, $sp, $imm", []>;
// ADD r, sp, so_reg
def t2ADDrSPs : T2sI<(outs GPR:$dst), (ins GPR:$sp, t2_so_reg:$rhs), IIC_iALU,
"add", ".w $dst, $sp, $rhs", []>;
// SUB r, sp, {so_imm|i12}
def t2SUBrSPi : T2sI<(outs GPR:$dst), (ins GPR:$sp, t2_so_imm:$imm), IIC_iALU,
"sub", ".w $dst, $sp, $imm", []>;
def t2SUBrSPi12 : T2I<(outs GPR:$dst), (ins GPR:$sp, imm0_4095:$imm), IIC_iALU,
"subw", " $dst, $sp, $imm", []>;
// SUB r, sp, so_reg
def t2SUBrSPs : T2sI<(outs GPR:$dst), (ins GPR:$sp, t2_so_reg:$rhs), IIC_iALU,
"sub", " $dst, $sp, $rhs", []>;
// Pseudo instruction that will expand into a t2SUBrSPi + a copy.
let usesCustomDAGSchedInserter = 1 in { // Expanded by the scheduler.
def t2SUBrSPi_ : PseudoInst<(outs GPR:$dst), (ins GPR:$sp, t2_so_imm:$imm),
NoItinerary, "@ sub.w $dst, $sp, $imm", []>;
def t2SUBrSPi12_ : PseudoInst<(outs GPR:$dst), (ins GPR:$sp, imm0_4095:$imm),
NoItinerary, "@ subw $dst, $sp, $imm", []>;
def t2SUBrSPs_ : PseudoInst<(outs GPR:$dst), (ins GPR:$sp, t2_so_reg:$rhs),
NoItinerary, "@ sub $dst, $sp, $rhs", []>;
} // usesCustomDAGSchedInserter
//===----------------------------------------------------------------------===//
// Load / store Instructions.
//
// Load
let canFoldAsLoad = 1 in
defm t2LDR : T2I_ld<"ldr", UnOpFrag<(load node:$Src)>>;
// Loads with zero extension
defm t2LDRH : T2I_ld<"ldrh", UnOpFrag<(zextloadi16 node:$Src)>>;
defm t2LDRB : T2I_ld<"ldrb", UnOpFrag<(zextloadi8 node:$Src)>>;
// Loads with sign extension
defm t2LDRSH : T2I_ld<"ldrsh", UnOpFrag<(sextloadi16 node:$Src)>>;
defm t2LDRSB : T2I_ld<"ldrsb", UnOpFrag<(sextloadi8 node:$Src)>>;
let mayLoad = 1 in {
// Load doubleword
def t2LDRDi8 : T2Ii8s4<(outs GPR:$dst), (ins t2addrmode_imm8s4:$addr),
IIC_iLoad, "ldrd", " $dst, $addr", []>;
def t2LDRDpci : T2Ii8s4<(outs GPR:$dst), (ins i32imm:$addr), IIC_iLoad,
"ldrd", " $dst, $addr", []>;
}
// zextload i1 -> zextload i8
def : T2Pat<(zextloadi1 t2addrmode_imm12:$addr),
(t2LDRBi12 t2addrmode_imm12:$addr)>;
def : T2Pat<(zextloadi1 t2addrmode_imm8:$addr),
(t2LDRBi8 t2addrmode_imm8:$addr)>;
def : T2Pat<(zextloadi1 t2addrmode_so_reg:$addr),
(t2LDRBs t2addrmode_so_reg:$addr)>;
def : T2Pat<(zextloadi1 (ARMWrapper tconstpool:$addr)),
(t2LDRBpci tconstpool:$addr)>;
// extload -> zextload
// FIXME: Reduce the number of patterns by legalizing extload to zextload
// earlier?
def : T2Pat<(extloadi1 t2addrmode_imm12:$addr),
(t2LDRBi12 t2addrmode_imm12:$addr)>;
def : T2Pat<(extloadi1 t2addrmode_imm8:$addr),
(t2LDRBi8 t2addrmode_imm8:$addr)>;
def : T2Pat<(extloadi1 t2addrmode_so_reg:$addr),
(t2LDRBs t2addrmode_so_reg:$addr)>;
def : T2Pat<(extloadi1 (ARMWrapper tconstpool:$addr)),
(t2LDRBpci tconstpool:$addr)>;
def : T2Pat<(extloadi8 t2addrmode_imm12:$addr),
(t2LDRBi12 t2addrmode_imm12:$addr)>;
def : T2Pat<(extloadi8 t2addrmode_imm8:$addr),
(t2LDRBi8 t2addrmode_imm8:$addr)>;
def : T2Pat<(extloadi8 t2addrmode_so_reg:$addr),
(t2LDRBs t2addrmode_so_reg:$addr)>;
def : T2Pat<(extloadi8 (ARMWrapper tconstpool:$addr)),
(t2LDRBpci tconstpool:$addr)>;
def : T2Pat<(extloadi16 t2addrmode_imm12:$addr),
(t2LDRHi12 t2addrmode_imm12:$addr)>;
def : T2Pat<(extloadi16 t2addrmode_imm8:$addr),
(t2LDRHi8 t2addrmode_imm8:$addr)>;
def : T2Pat<(extloadi16 t2addrmode_so_reg:$addr),
(t2LDRHs t2addrmode_so_reg:$addr)>;
def : T2Pat<(extloadi16 (ARMWrapper tconstpool:$addr)),
(t2LDRHpci tconstpool:$addr)>;
// Indexed loads
let mayLoad = 1 in {
def t2LDR_PRE : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins t2addrmode_imm8:$addr),
AddrModeT2_i8, IndexModePre, IIC_iLoad,
"ldr", " $dst, $addr!", "$addr.base = $base_wb",
[]>;
def t2LDR_POST : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iLoad,
"ldr", " $dst, [$base], $offset", "$base = $base_wb",
[]>;
def t2LDRB_PRE : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins t2addrmode_imm8:$addr),
AddrModeT2_i8, IndexModePre, IIC_iLoad,
"ldrb", " $dst, $addr!", "$addr.base = $base_wb",
[]>;
def t2LDRB_POST : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iLoad,
"ldrb", " $dst, [$base], $offset", "$base = $base_wb",
[]>;
def t2LDRH_PRE : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins t2addrmode_imm8:$addr),
AddrModeT2_i8, IndexModePre, IIC_iLoad,
"ldrh", " $dst, $addr!", "$addr.base = $base_wb",
[]>;
def t2LDRH_POST : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iLoad,
"ldrh", " $dst, [$base], $offset", "$base = $base_wb",
[]>;
def t2LDRSB_PRE : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins t2addrmode_imm8:$addr),
AddrModeT2_i8, IndexModePre, IIC_iLoad,
"ldrsb", " $dst, $addr!", "$addr.base = $base_wb",
[]>;
def t2LDRSB_POST : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iLoad,
"ldrsb", " $dst, [$base], $offset", "$base = $base_wb",
[]>;
def t2LDRSH_PRE : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins t2addrmode_imm8:$addr),
AddrModeT2_i8, IndexModePre, IIC_iLoad,
"ldrsh", " $dst, $addr!", "$addr.base = $base_wb",
[]>;
def t2LDRSH_POST : T2Iidxldst<(outs GPR:$dst, GPR:$base_wb),
(ins GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iLoad,
"ldrsh", " $dst, [$base], $offset", "$base = $base_wb",
[]>;
}
// Store
defm t2STR : T2I_st<"str", BinOpFrag<(store node:$LHS, node:$RHS)>>;
defm t2STRB : T2I_st<"strb", BinOpFrag<(truncstorei8 node:$LHS, node:$RHS)>>;
defm t2STRH : T2I_st<"strh", BinOpFrag<(truncstorei16 node:$LHS, node:$RHS)>>;
// Store doubleword
let mayLoad = 1 in
def t2STRDi8 : T2Ii8s4<(outs), (ins GPR:$src, t2addrmode_imm8s4:$addr), IIC_iStore,
"strd", " $src, $addr", []>;
// Indexed stores
def t2STR_PRE : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePre, IIC_iStore,
"str", " $src, [$base, $offset]!", "$base = $base_wb",
[(set GPR:$base_wb,
(pre_store GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
def t2STR_POST : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iStore,
"str", " $src, [$base], $offset", "$base = $base_wb",
[(set GPR:$base_wb,
(post_store GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
def t2STRH_PRE : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePre, IIC_iStore,
"strh", " $src, [$base, $offset]!", "$base = $base_wb",
[(set GPR:$base_wb,
(pre_truncsti16 GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
def t2STRH_POST : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iStore,
"strh", " $src, [$base], $offset", "$base = $base_wb",
[(set GPR:$base_wb,
(post_truncsti16 GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
def t2STRB_PRE : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePre, IIC_iStore,
"strb", " $src, [$base, $offset]!", "$base = $base_wb",
[(set GPR:$base_wb,
(pre_truncsti8 GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
def t2STRB_POST : T2Iidxldst<(outs GPR:$base_wb),
(ins GPR:$src, GPR:$base, t2am_imm8_offset:$offset),
AddrModeT2_i8, IndexModePost, IIC_iStore,
"strb", " $src, [$base], $offset", "$base = $base_wb",
[(set GPR:$base_wb,
(post_truncsti8 GPR:$src, GPR:$base, t2am_imm8_offset:$offset))]>;
// FIXME: ldrd / strd pre / post variants
//===----------------------------------------------------------------------===//
// Load / store multiple Instructions.
//
let mayLoad = 1 in
def t2LDM : T2XI<(outs),
(ins addrmode4:$addr, pred:$p, reglist:$dst1, variable_ops),
IIC_iLoad, "ldm${addr:submode}${p}${addr:wide} $addr, $dst1", []>;
let mayStore = 1 in
def t2STM : T2XI<(outs),
(ins addrmode4:$addr, pred:$p, reglist:$src1, variable_ops),
IIC_iStore, "stm${addr:submode}${p}${addr:wide} $addr, $src1", []>;
//===----------------------------------------------------------------------===//
// Move Instructions.
//
let neverHasSideEffects = 1 in
def t2MOVr : T2sI<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"mov", ".w $dst, $src", []>;
let isReMaterializable = 1, isAsCheapAsAMove = 1 in
def t2MOVi : T2sI<(outs GPR:$dst), (ins t2_so_imm:$src), IIC_iALU,
"mov", ".w $dst, $src",
[(set GPR:$dst, t2_so_imm:$src)]>;
let isReMaterializable = 1, isAsCheapAsAMove = 1 in
def t2MOVi16 : T2I<(outs GPR:$dst), (ins i32imm:$src), IIC_iALU,
"movw", " $dst, $src",
[(set GPR:$dst, imm0_65535:$src)]>;
// FIXME: Also available in ARM mode.
let Constraints = "$src = $dst" in
def t2MOVTi16 : T2sI<(outs GPR:$dst), (ins GPR:$src, i32imm:$imm), IIC_iALU,
"movt", " $dst, $imm",
[(set GPR:$dst,
(or (and GPR:$src, 0xffff), t2_lo16AllZero:$imm))]>;
//===----------------------------------------------------------------------===//
// Extend Instructions.
//
// Sign extenders
defm t2SXTB : T2I_unary_rrot<"sxtb", UnOpFrag<(sext_inreg node:$Src, i8)>>;
defm t2SXTH : T2I_unary_rrot<"sxth", UnOpFrag<(sext_inreg node:$Src, i16)>>;
defm t2SXTAB : T2I_bin_rrot<"sxtab",
BinOpFrag<(add node:$LHS, (sext_inreg node:$RHS, i8))>>;
defm t2SXTAH : T2I_bin_rrot<"sxtah",
BinOpFrag<(add node:$LHS, (sext_inreg node:$RHS,i16))>>;
// TODO: SXT(A){B|H}16
// Zero extenders
let AddedComplexity = 16 in {
defm t2UXTB : T2I_unary_rrot<"uxtb" , UnOpFrag<(and node:$Src, 0x000000FF)>>;
defm t2UXTH : T2I_unary_rrot<"uxth" , UnOpFrag<(and node:$Src, 0x0000FFFF)>>;
defm t2UXTB16 : T2I_unary_rrot<"uxtb16", UnOpFrag<(and node:$Src, 0x00FF00FF)>>;
def : T2Pat<(and (shl GPR:$Src, (i32 8)), 0xFF00FF),
(t2UXTB16r_rot GPR:$Src, 24)>;
def : T2Pat<(and (srl GPR:$Src, (i32 8)), 0xFF00FF),
(t2UXTB16r_rot GPR:$Src, 8)>;
defm t2UXTAB : T2I_bin_rrot<"uxtab",
BinOpFrag<(add node:$LHS, (and node:$RHS, 0x00FF))>>;
defm t2UXTAH : T2I_bin_rrot<"uxtah",
BinOpFrag<(add node:$LHS, (and node:$RHS, 0xFFFF))>>;
}
//===----------------------------------------------------------------------===//
// Arithmetic Instructions.
//
defm t2ADD : T2I_bin_ii12rs<"add", BinOpFrag<(add node:$LHS, node:$RHS)>, 1>;
defm t2SUB : T2I_bin_ii12rs<"sub", BinOpFrag<(sub node:$LHS, node:$RHS)>>;
// ADD and SUB with 's' bit set. No 12-bit immediate (T4) variants.
defm t2ADDS : T2I_bin_s_irs <"add", BinOpFrag<(addc node:$LHS, node:$RHS)>, 1>;
defm t2SUBS : T2I_bin_s_irs <"sub", BinOpFrag<(subc node:$LHS, node:$RHS)>>;
defm t2ADC : T2I_adde_sube_irs<"adc",BinOpFrag<(adde node:$LHS, node:$RHS)>,1>;
defm t2SBC : T2I_adde_sube_irs<"sbc",BinOpFrag<(sube node:$LHS, node:$RHS)>>;
// RSB
defm t2RSB : T2I_rbin_is <"rsb", BinOpFrag<(sub node:$LHS, node:$RHS)>>;
defm t2RSBS : T2I_rbin_s_is <"rsb", BinOpFrag<(subc node:$LHS, node:$RHS)>>;
// (sub X, imm) gets canonicalized to (add X, -imm). Match this form.
let AddedComplexity = 1 in
def : T2Pat<(add GPR:$src, imm0_255_neg:$imm),
(t2SUBri GPR:$src, imm0_255_neg:$imm)>;
def : T2Pat<(add GPR:$src, t2_so_imm_neg:$imm),
(t2SUBri GPR:$src, t2_so_imm_neg:$imm)>;
def : T2Pat<(add GPR:$src, imm0_4095_neg:$imm),
(t2SUBri12 GPR:$src, imm0_4095_neg:$imm)>;
//===----------------------------------------------------------------------===//
// Shift and rotate Instructions.
//
defm t2LSL : T2I_sh_ir<"lsl", BinOpFrag<(shl node:$LHS, node:$RHS)>>;
defm t2LSR : T2I_sh_ir<"lsr", BinOpFrag<(srl node:$LHS, node:$RHS)>>;
defm t2ASR : T2I_sh_ir<"asr", BinOpFrag<(sra node:$LHS, node:$RHS)>>;
defm t2ROR : T2I_sh_ir<"ror", BinOpFrag<(rotr node:$LHS, node:$RHS)>>;
def t2MOVrx : T2sI<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"rrx", ".w $dst, $src",
[(set GPR:$dst, (ARMrrx GPR:$src))]>;
let Defs = [CPSR] in {
def t2MOVsrl_flag : T2XI<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"lsrs.w $dst, $src, #1",
[(set GPR:$dst, (ARMsrl_flag GPR:$src))]>;
def t2MOVsra_flag : T2XI<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"asrs.w $dst, $src, #1",
[(set GPR:$dst, (ARMsra_flag GPR:$src))]>;
}
//===----------------------------------------------------------------------===//
// Bitwise Instructions.
//
defm t2AND : T2I_bin_w_irs<"and", BinOpFrag<(and node:$LHS, node:$RHS)>, 1>;
defm t2ORR : T2I_bin_w_irs<"orr", BinOpFrag<(or node:$LHS, node:$RHS)>, 1>;
defm t2EOR : T2I_bin_w_irs<"eor", BinOpFrag<(xor node:$LHS, node:$RHS)>, 1>;
defm t2BIC : T2I_bin_w_irs<"bic", BinOpFrag<(and node:$LHS, (not node:$RHS))>>;
let Constraints = "$src = $dst" in
def t2BFC : T2I<(outs GPR:$dst), (ins GPR:$src, bf_inv_mask_imm:$imm), IIC_iALU,
"bfc", " $dst, $imm",
[(set GPR:$dst, (and GPR:$src, bf_inv_mask_imm:$imm))]>;
// FIXME: A8.6.18 BFI - Bitfield insert (Encoding T1)
/*
defm t2ORN : T2I_bin_irs<"orn", BinOpFrag<(or node:$LHS, (not node:$RHS))>>;
*/
// FIXME: Disable this pattern on Darwin to workaround an assembler bug.
def t2ORNri : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_imm:$rhs), IIC_iALU,
"orn", " $dst, $lhs, $rhs",
[(set GPR:$dst, (or GPR:$lhs, (not t2_so_imm:$rhs)))]>,
Requires<[IsThumb2, IsNotDarwin]>;
def t2ORNrr : T2sI<(outs GPR:$dst), (ins GPR:$lhs, GPR:$rhs), IIC_iALU,
"orn", " $dst, $lhs, $rhs",
[(set GPR:$dst, (or GPR:$lhs, (not GPR:$rhs)))]>;
def t2ORNrs : T2sI<(outs GPR:$dst), (ins GPR:$lhs, t2_so_reg:$rhs), IIC_iALU,
"orn", " $dst, $lhs, $rhs",
[(set GPR:$dst, (or GPR:$lhs, (not t2_so_reg:$rhs)))]>;
// Prefer over of t2EORri ra, rb, -1 because mvn has 16-bit version
let AddedComplexity = 1 in
defm t2MVN : T2I_un_irs <"mvn", UnOpFrag<(not node:$Src)>, 1, 1>;
def : T2Pat<(and GPR:$src, t2_so_imm_not:$imm),
(t2BICri GPR:$src, t2_so_imm_not:$imm)>;
// FIXME: Disable this pattern on Darwin to workaround an assembler bug.
def : T2Pat<(or GPR:$src, t2_so_imm_not:$imm),
(t2ORNri GPR:$src, t2_so_imm_not:$imm)>,
Requires<[IsThumb2, IsNotDarwin]>;
def : T2Pat<(t2_so_imm_not:$src),
(t2MVNi t2_so_imm_not:$src)>;
//===----------------------------------------------------------------------===//
// Multiply Instructions.
//
let isCommutable = 1 in
def t2MUL: T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
"mul", " $dst, $a, $b",
[(set GPR:$dst, (mul GPR:$a, GPR:$b))]>;
def t2MLA: T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), IIC_iALU,
"mla", " $dst, $a, $b, $c",
[(set GPR:$dst, (add (mul GPR:$a, GPR:$b), GPR:$c))]>;
def t2MLS: T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), IIC_iALU,
"mls", " $dst, $a, $b, $c",
[(set GPR:$dst, (sub GPR:$c, (mul GPR:$a, GPR:$b)))]>;
// Extra precision multiplies with low / high results
let neverHasSideEffects = 1 in {
let isCommutable = 1 in {
def t2SMULL : T2I<(outs GPR:$ldst, GPR:$hdst), (ins GPR:$a, GPR:$b), IIC_iALU,
"smull", " $ldst, $hdst, $a, $b", []>;
def t2UMULL : T2I<(outs GPR:$ldst, GPR:$hdst), (ins GPR:$a, GPR:$b), IIC_iALU,
"umull", " $ldst, $hdst, $a, $b", []>;
}
// Multiply + accumulate
def t2SMLAL : T2I<(outs GPR:$ldst, GPR:$hdst), (ins GPR:$a, GPR:$b), IIC_iALU,
"smlal", " $ldst, $hdst, $a, $b", []>;
def t2UMLAL : T2I<(outs GPR:$ldst, GPR:$hdst), (ins GPR:$a, GPR:$b), IIC_iALU,
"umlal", " $ldst, $hdst, $a, $b", []>;
def t2UMAAL : T2I<(outs GPR:$ldst, GPR:$hdst), (ins GPR:$a, GPR:$b), IIC_iALU,
"umaal", " $ldst, $hdst, $a, $b", []>;
} // neverHasSideEffects
// Most significant word multiply
def t2SMMUL : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
"smmul", " $dst, $a, $b",
[(set GPR:$dst, (mulhs GPR:$a, GPR:$b))]>;
def t2SMMLA : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), IIC_iALU,
"smmla", " $dst, $a, $b, $c",
[(set GPR:$dst, (add (mulhs GPR:$a, GPR:$b), GPR:$c))]>;
def t2SMMLS : T2I <(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$c), IIC_iALU,
"smmls", " $dst, $a, $b, $c",
[(set GPR:$dst, (sub GPR:$c, (mulhs GPR:$a, GPR:$b)))]>;
multiclass T2I_smul<string opc, PatFrag opnode> {
def BB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "bb"), " $dst, $a, $b",
[(set GPR:$dst, (opnode (sext_inreg GPR:$a, i16),
(sext_inreg GPR:$b, i16)))]>;
def BT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "bt"), " $dst, $a, $b",
[(set GPR:$dst, (opnode (sext_inreg GPR:$a, i16),
(sra GPR:$b, (i32 16))))]>;
def TB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "tb"), " $dst, $a, $b",
[(set GPR:$dst, (opnode (sra GPR:$a, (i32 16)),
(sext_inreg GPR:$b, i16)))]>;
def TT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "tt"), " $dst, $a, $b",
[(set GPR:$dst, (opnode (sra GPR:$a, (i32 16)),
(sra GPR:$b, (i32 16))))]>;
def WB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "wb"), " $dst, $a, $b",
[(set GPR:$dst, (sra (opnode GPR:$a,
(sext_inreg GPR:$b, i16)), (i32 16)))]>;
def WT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b), IIC_iALU,
!strconcat(opc, "wt"), " $dst, $a, $b",
[(set GPR:$dst, (sra (opnode GPR:$a,
(sra GPR:$b, (i32 16))), (i32 16)))]>;
}
multiclass T2I_smla<string opc, PatFrag opnode> {
def BB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "bb"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc,
(opnode (sext_inreg GPR:$a, i16),
(sext_inreg GPR:$b, i16))))]>;
def BT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "bt"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc, (opnode (sext_inreg GPR:$a, i16),
(sra GPR:$b, (i32 16)))))]>;
def TB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "tb"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc, (opnode (sra GPR:$a, (i32 16)),
(sext_inreg GPR:$b, i16))))]>;
def TT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "tt"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc, (opnode (sra GPR:$a, (i32 16)),
(sra GPR:$b, (i32 16)))))]>;
def WB : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "wb"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc, (sra (opnode GPR:$a,
(sext_inreg GPR:$b, i16)), (i32 16))))]>;
def WT : T2I<(outs GPR:$dst), (ins GPR:$a, GPR:$b, GPR:$acc), IIC_iALU,
!strconcat(opc, "wt"), " $dst, $a, $b, $acc",
[(set GPR:$dst, (add GPR:$acc, (sra (opnode GPR:$a,
(sra GPR:$b, (i32 16))), (i32 16))))]>;
}
defm t2SMUL : T2I_smul<"smul", BinOpFrag<(mul node:$LHS, node:$RHS)>>;
defm t2SMLA : T2I_smla<"smla", BinOpFrag<(mul node:$LHS, node:$RHS)>>;
// TODO: Halfword multiple accumulate long: SMLAL<x><y>
// TODO: Dual halfword multiple: SMUAD, SMUSD, SMLAD, SMLSD, SMLALD, SMLSLD
//===----------------------------------------------------------------------===//
// Misc. Arithmetic Instructions.
//
def t2CLZ : T2I<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"clz", " $dst, $src",
[(set GPR:$dst, (ctlz GPR:$src))]>;
def t2REV : T2I<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"rev", ".w $dst, $src",
[(set GPR:$dst, (bswap GPR:$src))]>;
def t2REV16 : T2I<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"rev16", ".w $dst, $src",
[(set GPR:$dst,
(or (and (srl GPR:$src, (i32 8)), 0xFF),
(or (and (shl GPR:$src, (i32 8)), 0xFF00),
(or (and (srl GPR:$src, (i32 8)), 0xFF0000),
(and (shl GPR:$src, (i32 8)), 0xFF000000)))))]>;
def t2REVSH : T2I<(outs GPR:$dst), (ins GPR:$src), IIC_iALU,
"revsh", ".w $dst, $src",
[(set GPR:$dst,
(sext_inreg
(or (srl (and GPR:$src, 0xFFFF), (i32 8)),
(shl GPR:$src, (i32 8))), i16))]>;
def t2PKHBT : T2I<(outs GPR:$dst), (ins GPR:$src1, GPR:$src2, i32imm:$shamt),
IIC_iALU, "pkhbt", " $dst, $src1, $src2, LSL $shamt",
[(set GPR:$dst, (or (and GPR:$src1, 0xFFFF),
(and (shl GPR:$src2, (i32 imm:$shamt)),
0xFFFF0000)))]>;
// Alternate cases for PKHBT where identities eliminate some nodes.
def : T2Pat<(or (and GPR:$src1, 0xFFFF), (and GPR:$src2, 0xFFFF0000)),
(t2PKHBT GPR:$src1, GPR:$src2, 0)>;
def : T2Pat<(or (and GPR:$src1, 0xFFFF), (shl GPR:$src2, imm16_31:$shamt)),
(t2PKHBT GPR:$src1, GPR:$src2, imm16_31:$shamt)>;
def t2PKHTB : T2I<(outs GPR:$dst), (ins GPR:$src1, GPR:$src2, i32imm:$shamt),
IIC_iALU, "pkhtb", " $dst, $src1, $src2, ASR $shamt",
[(set GPR:$dst, (or (and GPR:$src1, 0xFFFF0000),
(and (sra GPR:$src2, imm16_31:$shamt),
0xFFFF)))]>;
// Alternate cases for PKHTB where identities eliminate some nodes. Note that
// a shift amount of 0 is *not legal* here, it is PKHBT instead.
def : T2Pat<(or (and GPR:$src1, 0xFFFF0000), (srl GPR:$src2, (i32 16))),
(t2PKHTB GPR:$src1, GPR:$src2, 16)>;
def : T2Pat<(or (and GPR:$src1, 0xFFFF0000),
(and (srl GPR:$src2, imm1_15:$shamt), 0xFFFF)),
(t2PKHTB GPR:$src1, GPR:$src2, imm1_15:$shamt)>;
//===----------------------------------------------------------------------===//
// Comparison Instructions...
//
defm t2CMP : T2I_cmp_is<"cmp",
BinOpFrag<(ARMcmp node:$LHS, node:$RHS)>>;
defm t2CMPz : T2I_cmp_is<"cmp",
BinOpFrag<(ARMcmpZ node:$LHS, node:$RHS)>>;
defm t2CMN : T2I_cmp_is<"cmn",
BinOpFrag<(ARMcmp node:$LHS,(ineg node:$RHS))>>;
defm t2CMNz : T2I_cmp_is<"cmn",
BinOpFrag<(ARMcmpZ node:$LHS,(ineg node:$RHS))>>;
def : T2Pat<(ARMcmp GPR:$src, t2_so_imm_neg:$imm),
(t2CMNri GPR:$src, t2_so_imm_neg:$imm)>;
def : T2Pat<(ARMcmpZ GPR:$src, t2_so_imm_neg:$imm),
(t2CMNri GPR:$src, t2_so_imm_neg:$imm)>;
defm t2TST : T2I_cmp_is<"tst",
BinOpFrag<(ARMcmpZ (and node:$LHS, node:$RHS), 0)>>;
defm t2TEQ : T2I_cmp_is<"teq",
BinOpFrag<(ARMcmpZ (xor node:$LHS, node:$RHS), 0)>>;
// A8.6.27 CBNZ, CBZ - Compare and branch on (non)zero.
// Short range conditional branch. Looks awesome for loops. Need to figure
// out how to use this one.
// Conditional moves
// FIXME: should be able to write a pattern for ARMcmov, but can't use
// a two-value operand where a dag node expects two operands. :(
def t2MOVCCr : T2I<(outs GPR:$dst), (ins GPR:$false, GPR:$true), IIC_iALU,
"mov", ".w $dst, $true",
[/*(set GPR:$dst, (ARMcmov GPR:$false, GPR:$true, imm:$cc, CCR:$ccr))*/]>,
RegConstraint<"$false = $dst">;
def t2MOVCCi : T2I<(outs GPR:$dst), (ins GPR:$false, t2_so_imm:$true), IIC_iALU,
"mov", ".w $dst, $true",
[/*(set GPR:$dst, (ARMcmov GPR:$false, t2_so_imm:$true, imm:$cc, CCR:$ccr))*/]>,
RegConstraint<"$false = $dst">;
def t2MOVCClsl : T2I<(outs GPR:$dst), (ins GPR:$false, GPR:$true, i32imm:$rhs),
IIC_iALU, "lsl", ".w $dst, $true, $rhs", []>,
RegConstraint<"$false = $dst">;
def t2MOVCClsr : T2I<(outs GPR:$dst), (ins GPR:$false, GPR:$true, i32imm:$rhs),
IIC_iALU, "lsr", ".w $dst, $true, $rhs", []>,
RegConstraint<"$false = $dst">;
def t2MOVCCasr : T2I<(outs GPR:$dst), (ins GPR:$false, GPR:$true, i32imm:$rhs),
IIC_iALU, "asr", ".w $dst, $true, $rhs", []>,
RegConstraint<"$false = $dst">;
def t2MOVCCror : T2I<(outs GPR:$dst), (ins GPR:$false, GPR:$true, i32imm:$rhs),
IIC_iALU, "ror", ".w $dst, $true, $rhs", []>,
RegConstraint<"$false = $dst">;
//===----------------------------------------------------------------------===//
// TLS Instructions
//
// __aeabi_read_tp preserves the registers r1-r3.
let isCall = 1,
Defs = [R0, R12, LR, CPSR] in {
def t2TPsoft : T2XI<(outs), (ins), IIC_Br,
"bl __aeabi_read_tp",
[(set R0, ARMthread_pointer)]>;
}
//===----------------------------------------------------------------------===//
// Control-Flow Instructions
//
// FIXME: remove when we have a way to marking a MI with these properties.
// FIXME: $dst1 should be a def. But the extra ops must be in the end of the
// operand list.
// FIXME: Should pc be an implicit operand like PICADD, etc?
let isReturn = 1, isTerminator = 1, mayLoad = 1 in
def t2LDM_RET : T2XI<(outs),
(ins addrmode4:$addr, pred:$p, reglist:$dst1, variable_ops),
IIC_iLoad, "ldm${addr:submode}${p}${addr:wide} $addr, $dst1",
[]>;
let isBranch = 1, isTerminator = 1, isBarrier = 1 in {
let isPredicable = 1 in
def t2B : T2XI<(outs), (ins brtarget:$target), IIC_Br,
"b.w $target",
[(br bb:$target)]>;
let isNotDuplicable = 1, isIndirectBranch = 1 in {
def t2BR_JT :
T2JTI<(outs),
(ins GPR:$target, GPR:$index, jt2block_operand:$jt, i32imm:$id),
IIC_Br, "mov pc, $target\n$jt",
[(ARMbr2jt GPR:$target, GPR:$index, tjumptable:$jt, imm:$id)]>;
// FIXME: Add a non-pc based case that can be predicated.
def t2TBB :
T2JTI<(outs),
(ins tb_addrmode:$index, jt2block_operand:$jt, i32imm:$id),
IIC_Br, "tbb $index\n$jt", []>;
def t2TBH :
T2JTI<(outs),
(ins tb_addrmode:$index, jt2block_operand:$jt, i32imm:$id),
IIC_Br, "tbh $index\n$jt", []>;
} // isNotDuplicable, isIndirectBranch
} // isBranch, isTerminator, isBarrier
// FIXME: should be able to write a pattern for ARMBrcond, but can't use
// a two-value operand where a dag node expects two operands. :(
let isBranch = 1, isTerminator = 1 in
def t2Bcc : T2I<(outs), (ins brtarget:$target), IIC_Br,
"b", ".w $target",
[/*(ARMbrcond bb:$target, imm:$cc)*/]>;
// IT block
def t2IT : Thumb2XI<(outs), (ins it_pred:$cc, it_mask:$mask),
AddrModeNone, Size2Bytes, IIC_iALU,
"it$mask $cc", "", []>;
//===----------------------------------------------------------------------===//
// Non-Instruction Patterns
//
// ConstantPool, GlobalAddress, and JumpTable
def : T2Pat<(ARMWrapper tglobaladdr :$dst), (t2LEApcrel tglobaladdr :$dst)>;
def : T2Pat<(ARMWrapper tconstpool :$dst), (t2LEApcrel tconstpool :$dst)>;
def : T2Pat<(ARMWrapperJT tjumptable:$dst, imm:$id),
(t2LEApcrelJT tjumptable:$dst, imm:$id)>;
// Large immediate handling.
def : T2Pat<(i32 imm:$src),
(t2MOVTi16 (t2MOVi16 (t2_lo16 imm:$src)), (t2_hi16 imm:$src))>;