mirror of
https://github.com/c64scene-ar/llvm-6502.git
synced 2024-12-22 07:32:48 +00:00
10bb82e54f
Patch by Michele Scandale! Rewrite of the functions used to compute the backedge taken count of a loop on LT and GT comparisons. I decided to split the handling of LT and GT cases becasue the trick "a > b == -a < -b" in some cases prevents the trip count computation due to the multiplication by -1 on the two operands of the comparison. This issue comes from the conservative computation of value range of SCEVs: taking the negative SCEV of an expression that have a small positive range (e.g. [0,31]), we would have a SCEV with a fullset as value range. Indeed, in the new rewritten function I tried to better handle the maximum backedge taken count computation when MAX/MIN expression are used to handle the cases where no entry guard is found. Some test have been modified in order to check the new value correctly (I manually check them and reasoning on possible overflow the new values seem correct). I finally added a new test case related to the multiplication by -1 issue on GT comparisons. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194116 91177308-0d34-0410-b5e6-96231b3b80d8
397 lines
9.4 KiB
LLVM
397 lines
9.4 KiB
LLVM
; RUN: opt < %s -indvars -S | FileCheck %s
|
|
;
|
|
; Make sure that indvars isn't inserting canonical IVs.
|
|
; This is kinda hard to do until linear function test replacement is removed.
|
|
|
|
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64"
|
|
|
|
define i32 @sum(i32* %arr, i32 %n) nounwind {
|
|
entry:
|
|
%precond = icmp slt i32 0, %n
|
|
br i1 %precond, label %ph, label %return
|
|
|
|
ph:
|
|
br label %loop
|
|
|
|
; CHECK: loop:
|
|
;
|
|
; We should only have 2 IVs.
|
|
; CHECK: phi
|
|
; CHECK: phi
|
|
; CHECK-NOT: phi
|
|
;
|
|
; sext should be eliminated while preserving gep inboundsness.
|
|
; CHECK-NOT: sext
|
|
; CHECK: getelementptr inbounds
|
|
; CHECK: exit:
|
|
loop:
|
|
%i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
|
|
%s.01 = phi i32 [ 0, %ph ], [ %sinc, %loop ]
|
|
%ofs = sext i32 %i.02 to i64
|
|
%adr = getelementptr inbounds i32* %arr, i64 %ofs
|
|
%val = load i32* %adr
|
|
%sinc = add nsw i32 %s.01, %val
|
|
%iinc = add nsw i32 %i.02, 1
|
|
%cond = icmp slt i32 %iinc, %n
|
|
br i1 %cond, label %loop, label %exit
|
|
|
|
exit:
|
|
%s.lcssa = phi i32 [ %sinc, %loop ]
|
|
br label %return
|
|
|
|
return:
|
|
%s.0.lcssa = phi i32 [ %s.lcssa, %exit ], [ 0, %entry ]
|
|
ret i32 %s.0.lcssa
|
|
}
|
|
|
|
define i64 @suml(i32* %arr, i32 %n) nounwind {
|
|
entry:
|
|
%precond = icmp slt i32 0, %n
|
|
br i1 %precond, label %ph, label %return
|
|
|
|
ph:
|
|
br label %loop
|
|
|
|
; CHECK: loop:
|
|
;
|
|
; We should only have 2 IVs.
|
|
; CHECK: phi
|
|
; CHECK: phi
|
|
; CHECK-NOT: phi
|
|
;
|
|
; %ofs sext should be eliminated while preserving gep inboundsness.
|
|
; CHECK-NOT: sext
|
|
; CHECK: getelementptr inbounds
|
|
; %vall sext should obviously not be eliminated
|
|
; CHECK: sext
|
|
; CHECK: exit:
|
|
loop:
|
|
%i.02 = phi i32 [ 0, %ph ], [ %iinc, %loop ]
|
|
%s.01 = phi i64 [ 0, %ph ], [ %sinc, %loop ]
|
|
%ofs = sext i32 %i.02 to i64
|
|
%adr = getelementptr inbounds i32* %arr, i64 %ofs
|
|
%val = load i32* %adr
|
|
%vall = sext i32 %val to i64
|
|
%sinc = add nsw i64 %s.01, %vall
|
|
%iinc = add nsw i32 %i.02, 1
|
|
%cond = icmp slt i32 %iinc, %n
|
|
br i1 %cond, label %loop, label %exit
|
|
|
|
exit:
|
|
%s.lcssa = phi i64 [ %sinc, %loop ]
|
|
br label %return
|
|
|
|
return:
|
|
%s.0.lcssa = phi i64 [ %s.lcssa, %exit ], [ 0, %entry ]
|
|
ret i64 %s.0.lcssa
|
|
}
|
|
|
|
define void @outofbounds(i32* %first, i32* %last, i32 %idx) nounwind {
|
|
%precond = icmp ne i32* %first, %last
|
|
br i1 %precond, label %ph, label %return
|
|
|
|
; CHECK: ph:
|
|
; It's not indvars' job to perform LICM on %ofs
|
|
; CHECK-NOT: sext
|
|
ph:
|
|
br label %loop
|
|
|
|
; CHECK: loop:
|
|
;
|
|
; Preserve exactly one pointer type IV.
|
|
; CHECK: phi i32*
|
|
; CHECK-NOT: phi
|
|
;
|
|
; Don't create any extra adds.
|
|
; CHECK-NOT: add
|
|
;
|
|
; Preserve gep inboundsness, and don't factor it.
|
|
; CHECK: getelementptr inbounds i32* %ptriv, i32 1
|
|
; CHECK-NOT: add
|
|
; CHECK: exit:
|
|
loop:
|
|
%ptriv = phi i32* [ %first, %ph ], [ %ptrpost, %loop ]
|
|
%ofs = sext i32 %idx to i64
|
|
%adr = getelementptr inbounds i32* %ptriv, i64 %ofs
|
|
store i32 3, i32* %adr
|
|
%ptrpost = getelementptr inbounds i32* %ptriv, i32 1
|
|
%cond = icmp ne i32* %ptrpost, %last
|
|
br i1 %cond, label %loop, label %exit
|
|
|
|
exit:
|
|
br label %return
|
|
|
|
return:
|
|
ret void
|
|
}
|
|
|
|
%structI = type { i32 }
|
|
|
|
define void @bitcastiv(i32 %start, i32 %limit, i32 %step, %structI* %base)
|
|
nounwind
|
|
{
|
|
entry:
|
|
br label %loop
|
|
|
|
; CHECK: loop:
|
|
;
|
|
; Preserve casts
|
|
; CHECK: phi i32
|
|
; CHECK: bitcast
|
|
; CHECK: getelementptr
|
|
; CHECK: exit:
|
|
loop:
|
|
%iv = phi i32 [%start, %entry], [%next, %loop]
|
|
%p = phi %structI* [%base, %entry], [%pinc, %loop]
|
|
%adr = getelementptr %structI* %p, i32 0, i32 0
|
|
store i32 3, i32* %adr
|
|
%pp = bitcast %structI* %p to i32*
|
|
store i32 4, i32* %pp
|
|
%pinc = getelementptr %structI* %p, i32 1
|
|
%next = add i32 %iv, 1
|
|
%cond = icmp ne i32 %next, %limit
|
|
br i1 %cond, label %loop, label %exit
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define void @maxvisitor(i32 %limit, i32* %base) nounwind {
|
|
entry:
|
|
br label %loop
|
|
|
|
; Test inserting a truncate at a phi use.
|
|
;
|
|
; CHECK: loop:
|
|
; CHECK: phi i64
|
|
; CHECK: trunc
|
|
; CHECK: exit:
|
|
loop:
|
|
%idx = phi i32 [ 0, %entry ], [ %idx.next, %loop.inc ]
|
|
%max = phi i32 [ 0, %entry ], [ %max.next, %loop.inc ]
|
|
%idxprom = sext i32 %idx to i64
|
|
%adr = getelementptr inbounds i32* %base, i64 %idxprom
|
|
%val = load i32* %adr
|
|
%cmp19 = icmp sgt i32 %val, %max
|
|
br i1 %cmp19, label %if.then, label %if.else
|
|
|
|
if.then:
|
|
br label %loop.inc
|
|
|
|
if.else:
|
|
br label %loop.inc
|
|
|
|
loop.inc:
|
|
%max.next = phi i32 [ %idx, %if.then ], [ %max, %if.else ]
|
|
%idx.next = add nsw i32 %idx, 1
|
|
%cmp = icmp slt i32 %idx.next, %limit
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define void @identityphi(i32 %limit) nounwind {
|
|
entry:
|
|
br label %loop
|
|
|
|
; Test an edge case of removing an identity phi that directly feeds
|
|
; back to the loop iv.
|
|
;
|
|
; CHECK: loop:
|
|
; CHECK-NOT: phi
|
|
; CHECK: exit:
|
|
loop:
|
|
%iv = phi i32 [ 0, %entry], [ %iv.next, %control ]
|
|
br i1 undef, label %if.then, label %control
|
|
|
|
if.then:
|
|
br label %control
|
|
|
|
control:
|
|
%iv.next = phi i32 [ %iv, %loop ], [ undef, %if.then ]
|
|
%cmp = icmp slt i32 %iv.next, %limit
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define i64 @cloneOr(i32 %limit, i64* %base) nounwind {
|
|
entry:
|
|
; ensure that the loop can't overflow
|
|
%halfLim = ashr i32 %limit, 2
|
|
br label %loop
|
|
|
|
; This test originally checked that the OR instruction was cloned. Now the
|
|
; ScalarEvolution is able to understand the loop evolution and that '%iv' at the
|
|
; end of the loop is an even value. Thus '%val' is computed at the end of the
|
|
; loop and the OR instruction is replaced by an ADD keeping the result
|
|
; equivalent.
|
|
;
|
|
; CHECK: loop:
|
|
; CHECK: phi i64
|
|
; CHECK-NOT: sext
|
|
; CHECK: icmp slt i32
|
|
; CHECK: exit:
|
|
; CHECK: add i64
|
|
loop:
|
|
%iv = phi i32 [ 0, %entry], [ %iv.next, %loop ]
|
|
%t1 = sext i32 %iv to i64
|
|
%adr = getelementptr i64* %base, i64 %t1
|
|
%val = load i64* %adr
|
|
%t2 = or i32 %iv, 1
|
|
%t3 = sext i32 %t2 to i64
|
|
%iv.next = add i32 %iv, 2
|
|
%cmp = icmp slt i32 %iv.next, %halfLim
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
exit:
|
|
%result = and i64 %val, %t3
|
|
ret i64 %result
|
|
}
|
|
|
|
; The i induction variable looks like a wrap-around, but it really is just
|
|
; a simple affine IV. Make sure that indvars simplifies through.
|
|
define i32 @indirectRecurrence() nounwind {
|
|
entry:
|
|
br label %loop
|
|
|
|
; ReplaceLoopExitValue should fold the return value to constant 9.
|
|
; CHECK: loop:
|
|
; CHECK: phi i32
|
|
; CHECK: ret i32 9
|
|
loop:
|
|
%j.0 = phi i32 [ 1, %entry ], [ %j.next, %cond_true ]
|
|
%i.0 = phi i32 [ 0, %entry ], [ %j.0, %cond_true ]
|
|
%tmp = icmp ne i32 %j.0, 10
|
|
br i1 %tmp, label %cond_true, label %return
|
|
|
|
cond_true:
|
|
%j.next = add i32 %j.0, 1
|
|
br label %loop
|
|
|
|
return:
|
|
ret i32 %i.0
|
|
}
|
|
|
|
; Eliminate the congruent phis j, k, and l.
|
|
; Eliminate the redundant IV increments k.next and l.next.
|
|
; Two phis should remain, one starting at %init, and one at %init1.
|
|
; Two increments should remain, one by %step and one by %step1.
|
|
; CHECK: loop:
|
|
; CHECK: phi i32
|
|
; CHECK: phi i32
|
|
; CHECK-NOT: phi
|
|
; CHECK: add i32
|
|
; CHECK: add i32
|
|
; CHECK: add i32
|
|
; CHECK-NOT: add
|
|
; CHECK: return:
|
|
;
|
|
; Five live-outs should remain.
|
|
; CHECK: lcssa = phi
|
|
; CHECK: lcssa = phi
|
|
; CHECK: lcssa = phi
|
|
; CHECK: lcssa = phi
|
|
; CHECK: lcssa = phi
|
|
; CHECK-NOT: phi
|
|
; CHECK: ret
|
|
define i32 @isomorphic(i32 %init, i32 %step, i32 %lim) nounwind {
|
|
entry:
|
|
%step1 = add i32 %step, 1
|
|
%init1 = add i32 %init, %step1
|
|
%l.0 = sub i32 %init1, %step1
|
|
br label %loop
|
|
|
|
loop:
|
|
%ii = phi i32 [ %init1, %entry ], [ %ii.next, %loop ]
|
|
%i = phi i32 [ %init, %entry ], [ %ii, %loop ]
|
|
%j = phi i32 [ %init, %entry ], [ %j.next, %loop ]
|
|
%k = phi i32 [ %init1, %entry ], [ %k.next, %loop ]
|
|
%l = phi i32 [ %l.0, %entry ], [ %l.next, %loop ]
|
|
%ii.next = add i32 %ii, %step1
|
|
%j.next = add i32 %j, %step1
|
|
%k.next = add i32 %k, %step1
|
|
%l.step = add i32 %l, %step
|
|
%l.next = add i32 %l.step, 1
|
|
%cmp = icmp ne i32 %ii.next, %lim
|
|
br i1 %cmp, label %loop, label %return
|
|
|
|
return:
|
|
%sum1 = add i32 %i, %j.next
|
|
%sum2 = add i32 %sum1, %k.next
|
|
%sum3 = add i32 %sum1, %l.step
|
|
%sum4 = add i32 %sum1, %l.next
|
|
ret i32 %sum4
|
|
}
|
|
|
|
; Test a GEP IV that is derived from another GEP IV by a nop gep that
|
|
; lowers the type without changing the expression.
|
|
%structIF = type { i32, float }
|
|
|
|
define void @congruentgepiv(%structIF* %base) nounwind uwtable ssp {
|
|
entry:
|
|
%first = getelementptr inbounds %structIF* %base, i64 0, i32 0
|
|
br label %loop
|
|
|
|
; CHECK: loop:
|
|
; CHECK: phi %structIF*
|
|
; CHECK-NOT: phi
|
|
; CHECK: getelementptr inbounds
|
|
; CHECK-NOT: getelementptr
|
|
; CHECK: exit:
|
|
loop:
|
|
%ptr.iv = phi %structIF* [ %ptr.inc, %latch ], [ %base, %entry ]
|
|
%next = phi i32* [ %next.inc, %latch ], [ %first, %entry ]
|
|
store i32 4, i32* %next
|
|
br i1 undef, label %latch, label %exit
|
|
|
|
latch: ; preds = %for.inc50.i
|
|
%ptr.inc = getelementptr inbounds %structIF* %ptr.iv, i64 1
|
|
%next.inc = getelementptr inbounds %structIF* %ptr.inc, i64 0, i32 0
|
|
br label %loop
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
; Test a widened IV that is used by a phi on different paths within the loop.
|
|
;
|
|
; CHECK: for.body:
|
|
; CHECK: phi i64
|
|
; CHECK: trunc i64
|
|
; CHECK: if.then:
|
|
; CHECK: for.inc:
|
|
; CHECK: phi i32
|
|
; CHECK: for.end:
|
|
define void @phiUsesTrunc() nounwind {
|
|
entry:
|
|
br i1 undef, label %for.body, label %for.end
|
|
|
|
for.body:
|
|
%iv = phi i32 [ %inc, %for.inc ], [ 1, %entry ]
|
|
br i1 undef, label %if.then, label %if.else
|
|
|
|
if.then:
|
|
br i1 undef, label %if.then33, label %for.inc
|
|
|
|
if.then33:
|
|
br label %for.inc
|
|
|
|
if.else:
|
|
br i1 undef, label %if.then97, label %for.inc
|
|
|
|
if.then97:
|
|
%idxprom100 = sext i32 %iv to i64
|
|
br label %for.inc
|
|
|
|
for.inc:
|
|
%kmin.1 = phi i32 [ %iv, %if.then33 ], [ 0, %if.then ], [ %iv, %if.then97 ], [ 0, %if.else ]
|
|
%inc = add nsw i32 %iv, 1
|
|
br i1 undef, label %for.body, label %for.end
|
|
|
|
for.end:
|
|
ret void
|
|
}
|