llvm-6502/test/CodeGen/ARM/sub-cmp-peephole.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

207 lines
4.6 KiB
LLVM

; RUN: llc < %s -mtriple=arm-apple-darwin | FileCheck %s
; RUN: llc < %s -mtriple=arm-apple-darwin | FileCheck %s --check-prefix=V7
; RUN: llc < %s -mtriple=armv8-none-linux-gnueabi | FileCheck %s -check-prefix=V8
define i32 @f(i32 %a, i32 %b) nounwind ssp {
entry:
; CHECK-LABEL: f:
; CHECK: subs
; CHECK-NOT: cmp
%cmp = icmp sgt i32 %a, %b
%sub = sub nsw i32 %a, %b
%sub. = select i1 %cmp, i32 %sub, i32 0
ret i32 %sub.
}
define i32 @g(i32 %a, i32 %b) nounwind ssp {
entry:
; CHECK-LABEL: g:
; CHECK: subs
; CHECK-NOT: cmp
%cmp = icmp slt i32 %a, %b
%sub = sub nsw i32 %b, %a
%sub. = select i1 %cmp, i32 %sub, i32 0
ret i32 %sub.
}
define i32 @h(i32 %a, i32 %b) nounwind ssp {
entry:
; CHECK-LABEL: h:
; CHECK: subs
; CHECK-NOT: cmp
%cmp = icmp sgt i32 %a, 3
%sub = sub nsw i32 %a, 3
%sub. = select i1 %cmp, i32 %sub, i32 %b
ret i32 %sub.
}
; rdar://11725965
define i32 @i(i32 %a, i32 %b) nounwind readnone ssp {
entry:
; CHECK-LABEL: i:
; CHECK: subs
; CHECK-NOT: cmp
%cmp = icmp ult i32 %a, %b
%sub = sub i32 %b, %a
%sub. = select i1 %cmp, i32 %sub, i32 0
ret i32 %sub.
}
; If CPSR is live-out, we can't remove cmp if there exists
; a swapped sub.
define i32 @j(i32 %a, i32 %b) nounwind {
entry:
; CHECK-LABEL: j:
; CHECK: sub
; CHECK: cmp
%cmp = icmp eq i32 %b, %a
%sub = sub nsw i32 %a, %b
br i1 %cmp, label %if.then, label %if.else
if.then:
%cmp2 = icmp sgt i32 %b, %a
%sel = select i1 %cmp2, i32 %sub, i32 %a
ret i32 %sel
if.else:
ret i32 %sub
}
; If the sub/rsb instruction is predicated, we can't use the flags.
; <rdar://problem/12263428>
; Test case from MultiSource/Benchmarks/Ptrdist/bc/number.s
; CHECK: bc_raise
; CHECK: rsbeq
; CHECK: cmp
define i32 @bc_raise() nounwind ssp {
entry:
%val.2.i = select i1 undef, i32 0, i32 undef
%sub.i = sub nsw i32 0, %val.2.i
%retval.0.i = select i1 undef, i32 %val.2.i, i32 %sub.i
%cmp1 = icmp eq i32 %retval.0.i, 0
br i1 %cmp1, label %land.lhs.true, label %if.end11
land.lhs.true: ; preds = %num2long.exit
ret i32 17
if.end11: ; preds = %num2long.exit
ret i32 23
}
; When considering the producer of cmp's src as the subsuming instruction,
; only consider that when the comparison is to 0.
define i32 @cmp_src_nonzero(i32 %a, i32 %b, i32 %x, i32 %y) {
entry:
; CHECK-LABEL: cmp_src_nonzero:
; CHECK: sub
; CHECK: cmp
%sub = sub i32 %a, %b
%cmp = icmp eq i32 %sub, 17
%ret = select i1 %cmp, i32 %x, i32 %y
ret i32 %ret
}
define float @float_sel(i32 %a, i32 %b, float %x, float %y) {
entry:
; CHECK-LABEL: float_sel:
; CHECK-NOT: cmp
; V8-LABEL: float_sel:
; V8-NOT: cmp
; V8: vseleq.f32
%sub = sub i32 %a, %b
%cmp = icmp eq i32 %sub, 0
%ret = select i1 %cmp, float %x, float %y
ret float %ret
}
define double @double_sel(i32 %a, i32 %b, double %x, double %y) {
entry:
; CHECK-LABEL: double_sel:
; CHECK-NOT: cmp
; V8-LABEL: double_sel:
; V8-NOT: cmp
; V8: vseleq.f64
%sub = sub i32 %a, %b
%cmp = icmp eq i32 %sub, 0
%ret = select i1 %cmp, double %x, double %y
ret double %ret
}
@t = common global i32 0
define double @double_sub(i32 %a, i32 %b, double %x, double %y) {
entry:
; CHECK-LABEL: double_sub:
; CHECK: subs
; CHECK-NOT: cmp
; V8-LABEL: double_sub:
; V8: vsel
%cmp = icmp sgt i32 %a, %b
%sub = sub i32 %a, %b
store i32 %sub, i32* @t
%ret = select i1 %cmp, double %x, double %y
ret double %ret
}
define double @double_sub_swap(i32 %a, i32 %b, double %x, double %y) {
entry:
; V7-LABEL: double_sub_swap:
; V7-NOT: cmp
; V7: subs
; V8-LABEL: double_sub_swap:
; V8-NOT: subs
; V8: cmp
; V8: vsel
%cmp = icmp sgt i32 %a, %b
%sub = sub i32 %b, %a
%ret = select i1 %cmp, double %x, double %y
store i32 %sub, i32* @t
ret double %ret
}
declare void @abort()
declare void @exit(i32)
; If the comparison uses the V bit (signed overflow/underflow), we can't
; omit the comparison.
define i32 @cmp_slt0(i32 %a, i32 %b, i32 %x, i32 %y) {
entry:
; CHECK-LABEL: cmp_slt0
; CHECK: sub
; CHECK: cmp
; CHECK: bge
%load = load i32, i32* @t, align 4
%sub = sub i32 %load, 17
%cmp = icmp slt i32 %sub, 0
br i1 %cmp, label %if.then, label %if.else
if.then:
call void @abort()
unreachable
if.else:
call void @exit(i32 0)
unreachable
}
; Same for the C bit. (Note the ult X, 0 is trivially
; false, so the DAG combiner may or may not optimize it).
define i32 @cmp_ult0(i32 %a, i32 %b, i32 %x, i32 %y) {
entry:
; CHECK-LABEL: cmp_ult0
; CHECK: sub
; CHECK: cmp
; CHECK: bhs
%load = load i32, i32* @t, align 4
%sub = sub i32 %load, 17
%cmp = icmp ult i32 %sub, 0
br i1 %cmp, label %if.then, label %if.else
if.then:
call void @abort()
unreachable
if.else:
call void @exit(i32 0)
unreachable
}