llvm-6502/test/CodeGen/SystemZ/fp-cmp-04.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

408 lines
8.6 KiB
LLVM

; Test that floating-point compares are omitted if CC already has the
; right value.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 -no-integrated-as | FileCheck %s
declare float @llvm.fabs.f32(float %f)
; Test addition followed by EQ, which can use the CC result of the addition.
define float @f1(float %a, float %b, float *%dest) {
; CHECK-LABEL: f1:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: je .L{{.*}}
; CHECK: br %r14
entry:
%res = fadd float %a, %b
%cmp = fcmp oeq float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; ...and again with LT.
define float @f2(float %a, float %b, float *%dest) {
; CHECK-LABEL: f2:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
%res = fadd float %a, %b
%cmp = fcmp olt float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; ...and again with GT.
define float @f3(float %a, float %b, float *%dest) {
; CHECK-LABEL: f3:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: jh .L{{.*}}
; CHECK: br %r14
entry:
%res = fadd float %a, %b
%cmp = fcmp ogt float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; ...and again with UEQ.
define float @f4(float %a, float %b, float *%dest) {
; CHECK-LABEL: f4:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: jnlh .L{{.*}}
; CHECK: br %r14
entry:
%res = fadd float %a, %b
%cmp = fcmp ueq float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; Subtraction also provides a zero-based CC value.
define float @f5(float %a, float %b, float *%dest) {
; CHECK-LABEL: f5:
; CHECK: seb %f0, 0(%r2)
; CHECK-NEXT: jnhe .L{{.*}}
; CHECK: br %r14
entry:
%cur = load float , float *%dest
%res = fsub float %a, %cur
%cmp = fcmp ult float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; Test the result of LOAD POSITIVE.
define float @f6(float %dummy, float %a, float *%dest) {
; CHECK-LABEL: f6:
; CHECK: lpebr %f0, %f2
; CHECK-NEXT: jh .L{{.*}}
; CHECK: br %r14
entry:
%res = call float @llvm.fabs.f32(float %a)
%cmp = fcmp ogt float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %res, float *%dest
br label %exit
exit:
ret float %res
}
; Test the result of LOAD NEGATIVE.
define float @f7(float %dummy, float %a, float *%dest) {
; CHECK-LABEL: f7:
; CHECK: lnebr %f0, %f2
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
%abs = call float @llvm.fabs.f32(float %a)
%res = fsub float -0.0, %abs
%cmp = fcmp olt float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %res, float *%dest
br label %exit
exit:
ret float %res
}
; Test the result of LOAD COMPLEMENT.
define float @f8(float %dummy, float %a, float *%dest) {
; CHECK-LABEL: f8:
; CHECK: lcebr %f0, %f2
; CHECK-NEXT: jle .L{{.*}}
; CHECK: br %r14
entry:
%res = fsub float -0.0, %a
%cmp = fcmp ole float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %res, float *%dest
br label %exit
exit:
ret float %res
}
; Multiplication (for example) does not modify CC.
define float @f9(float %a, float %b, float *%dest) {
; CHECK-LABEL: f9:
; CHECK: meebr %f0, %f2
; CHECK-NEXT: ltebr %f0, %f0
; CHECK-NEXT: jlh .L{{.*}}
; CHECK: br %r14
entry:
%res = fmul float %a, %b
%cmp = fcmp one float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; Test a combination involving a CC-setting instruction followed by
; a non-CC-setting instruction.
define float @f10(float %a, float %b, float %c, float *%dest) {
; CHECK-LABEL: f10:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: debr %f0, %f4
; CHECK-NEXT: ltebr %f0, %f0
; CHECK-NEXT: jne .L{{.*}}
; CHECK: br %r14
entry:
%add = fadd float %a, %b
%res = fdiv float %add, %c
%cmp = fcmp une float %res, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; Test a case where CC is set based on a different register from the
; compare input.
define float @f11(float %a, float %b, float %c, float *%dest1, float *%dest2) {
; CHECK-LABEL: f11:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: sebr %f4, %f0
; CHECK-NEXT: ste %f4, 0(%r2)
; CHECK-NEXT: ltebr %f0, %f0
; CHECK-NEXT: je .L{{.*}}
; CHECK: br %r14
entry:
%add = fadd float %a, %b
%sub = fsub float %c, %add
store float %sub, float *%dest1
%cmp = fcmp oeq float %add, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %sub, float *%dest2
br label %exit
exit:
ret float %add
}
; Test that LER gets converted to LTEBR where useful.
define float @f12(float %dummy, float %val, float *%dest) {
; CHECK-LABEL: f12:
; CHECK: ltebr %f0, %f2
; CHECK-NEXT: #APP
; CHECK-NEXT: blah %f0
; CHECK-NEXT: #NO_APP
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
call void asm sideeffect "blah $0", "{f0}"(float %val)
%cmp = fcmp olt float %val, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %val, float *%dest
br label %exit
exit:
ret float %val
}
; Test that LDR gets converted to LTDBR where useful.
define double @f13(double %dummy, double %val, double *%dest) {
; CHECK-LABEL: f13:
; CHECK: ltdbr %f0, %f2
; CHECK-NEXT: #APP
; CHECK-NEXT: blah %f0
; CHECK-NEXT: #NO_APP
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
call void asm sideeffect "blah $0", "{f0}"(double %val)
%cmp = fcmp olt double %val, 0.0
br i1 %cmp, label %exit, label %store
store:
store double %val, double *%dest
br label %exit
exit:
ret double %val
}
; Test that LXR gets converted to LTXBR where useful.
define void @f14(fp128 *%ptr1, fp128 *%ptr2) {
; CHECK-LABEL: f14:
; CHECK: ltxbr
; CHECK-NEXT: dxbr
; CHECK-NEXT: std
; CHECK-NEXT: std
; CHECK-NEXT: mxbr
; CHECK-NEXT: std
; CHECK-NEXT: std
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
%val1 = load fp128 , fp128 *%ptr1
%val2 = load fp128 , fp128 *%ptr2
%div = fdiv fp128 %val1, %val2
store fp128 %div, fp128 *%ptr1
%mul = fmul fp128 %val1, %val2
store fp128 %mul, fp128 *%ptr2
%cmp = fcmp olt fp128 %val1, 0xL00000000000000000000000000000000
br i1 %cmp, label %exit, label %store
store:
call void asm sideeffect "blah", ""()
br label %exit
exit:
ret void
}
; Test a case where it is the source rather than destination of LER that
; we need.
define float @f15(float %val, float %dummy, float *%dest) {
; CHECK-LABEL: f15:
; CHECK: ltebr %f2, %f0
; CHECK-NEXT: #APP
; CHECK-NEXT: blah %f2
; CHECK-NEXT: #NO_APP
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
call void asm sideeffect "blah $0", "{f2}"(float %val)
%cmp = fcmp olt float %val, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %val, float *%dest
br label %exit
exit:
ret float %val
}
; Test a case where it is the source rather than destination of LDR that
; we need.
define double @f16(double %val, double %dummy, double *%dest) {
; CHECK-LABEL: f16:
; CHECK: ltdbr %f2, %f0
; CHECK-NEXT: #APP
; CHECK-NEXT: blah %f2
; CHECK-NEXT: #NO_APP
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
call void asm sideeffect "blah $0", "{f2}"(double %val)
%cmp = fcmp olt double %val, 0.0
br i1 %cmp, label %exit, label %store
store:
store double %val, double *%dest
br label %exit
exit:
ret double %val
}
; Repeat f2 with a comparison against -0.
define float @f17(float %a, float %b, float *%dest) {
; CHECK-LABEL: f17:
; CHECK: aebr %f0, %f2
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
%res = fadd float %a, %b
%cmp = fcmp olt float %res, -0.0
br i1 %cmp, label %exit, label %store
store:
store float %b, float *%dest
br label %exit
exit:
ret float %res
}
; Test another form of f7 in which the condition is based on the unnegated
; result. This is what InstCombine would produce.
define float @f18(float %dummy, float %a, float *%dest) {
; CHECK-LABEL: f18:
; CHECK: lnebr %f0, %f2
; CHECK-NEXT: jl .L{{.*}}
; CHECK: br %r14
entry:
%abs = call float @llvm.fabs.f32(float %a)
%res = fsub float -0.0, %abs
%cmp = fcmp ogt float %abs, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %res, float *%dest
br label %exit
exit:
ret float %res
}
; Similarly for f8.
define float @f19(float %dummy, float %a, float *%dest) {
; CHECK-LABEL: f19:
; CHECK: lcebr %f0, %f2
; CHECK-NEXT: jle .L{{.*}}
; CHECK: br %r14
entry:
%res = fsub float -0.0, %a
%cmp = fcmp oge float %a, 0.0
br i1 %cmp, label %exit, label %store
store:
store float %res, float *%dest
br label %exit
exit:
ret float %res
}