llvm-6502/test/CodeGen/SystemZ/int-cmp-03.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

175 lines
4.8 KiB
LLVM

; Test 32-bit unsigned comparison in which the second operand is a variable.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; Check register comparison.
define double @f1(double %a, double %b, i32 %i1, i32 %i2) {
; CHECK-LABEL: f1:
; CHECK: clrjl %r2, %r3
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the low end of the CL range.
define double @f2(double %a, double %b, i32 %i1, i32 *%ptr) {
; CHECK-LABEL: f2:
; CHECK: cl %r2, 0(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the high end of the aligned CL range.
define double @f3(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f3:
; CHECK: cl %r2, 4092(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 1023
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the next word up, which should use CLY instead of CL.
define double @f4(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f4:
; CHECK: cly %r2, 4096(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 1024
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the high end of the aligned CLY range.
define double @f5(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f5:
; CHECK: cly %r2, 524284(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 131071
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the next word up, which needs separate address logic.
; Other sequences besides this one would be OK.
define double @f6(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f6:
; CHECK: agfi %r3, 524288
; CHECK: cl %r2, 0(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 131072
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the high end of the negative aligned CLY range.
define double @f7(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f7:
; CHECK: cly %r2, -4(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 -1
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the low end of the CLY range.
define double @f8(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f8:
; CHECK: cly %r2, -524288(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 -131072
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the next word down, which needs separate address logic.
; Other sequences besides this one would be OK.
define double @f9(double %a, double %b, i32 %i1, i32 *%base) {
; CHECK-LABEL: f9:
; CHECK: agfi %r3, -524292
; CHECK: cl %r2, 0(%r3)
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%base, i64 -131073
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check that CL allows an index.
define double @f10(double %a, double %b, i32 %i1, i64 %base, i64 %index) {
; CHECK-LABEL: f10:
; CHECK: cl %r2, 4092({{%r4,%r3|%r3,%r4}})
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%add1 = add i64 %base, %index
%add2 = add i64 %add1, 4092
%ptr = inttoptr i64 %add2 to i32 *
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check that CLY allows an index.
define double @f11(double %a, double %b, i32 %i1, i64 %base, i64 %index) {
; CHECK-LABEL: f11:
; CHECK: cly %r2, 4096({{%r4,%r3|%r3,%r4}})
; CHECK-NEXT: jl
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%add1 = add i64 %base, %index
%add2 = add i64 %add1, 4096
%ptr = inttoptr i64 %add2 to i32 *
%i2 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}
; Check the comparison can be reversed if that allows CL to be used.
define double @f12(double %a, double %b, i32 %i2, i32 *%ptr) {
; CHECK-LABEL: f12:
; CHECK: cl %r2, 0(%r3)
; CHECK-NEXT: jh {{\.L.*}}
; CHECK: ldr %f0, %f2
; CHECK: br %r14
%i1 = load i32 , i32 *%ptr
%cond = icmp ult i32 %i1, %i2
%res = select i1 %cond, double %a, double %b
ret double %res
}