llvm-6502/include/llvm/CodeGen/ISDOpcodes.h
Chris Lattner d8c7ff0019 fix thinko :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125466 91177308-0d34-0410-b5e6-96231b3b80d8
2011-02-13 19:53:36 +00:00

800 lines
36 KiB
C++

//===-- llvm/CodeGen/ISDOpcodes.h - CodeGen opcodes -------------*- C++ -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file declares codegen opcodes and related utilities.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_CODEGEN_ISDOPCODES_H
#define LLVM_CODEGEN_ISDOPCODES_H
namespace llvm {
/// ISD namespace - This namespace contains an enum which represents all of the
/// SelectionDAG node types and value types.
///
namespace ISD {
//===--------------------------------------------------------------------===//
/// ISD::NodeType enum - This enum defines the target-independent operators
/// for a SelectionDAG.
///
/// Targets may also define target-dependent operator codes for SDNodes. For
/// example, on x86, these are the enum values in the X86ISD namespace.
/// Targets should aim to use target-independent operators to model their
/// instruction sets as much as possible, and only use target-dependent
/// operators when they have special requirements.
///
/// Finally, during and after selection proper, SNodes may use special
/// operator codes that correspond directly with MachineInstr opcodes. These
/// are used to represent selected instructions. See the isMachineOpcode()
/// and getMachineOpcode() member functions of SDNode.
///
enum NodeType {
// DELETED_NODE - This is an illegal value that is used to catch
// errors. This opcode is not a legal opcode for any node.
DELETED_NODE,
// EntryToken - This is the marker used to indicate the start of the region.
EntryToken,
// TokenFactor - This node takes multiple tokens as input and produces a
// single token result. This is used to represent the fact that the operand
// operators are independent of each other.
TokenFactor,
// AssertSext, AssertZext - These nodes record if a register contains a
// value that has already been zero or sign extended from a narrower type.
// These nodes take two operands. The first is the node that has already
// been extended, and the second is a value type node indicating the width
// of the extension
AssertSext, AssertZext,
// Various leaf nodes.
BasicBlock, VALUETYPE, CONDCODE, Register,
Constant, ConstantFP,
GlobalAddress, GlobalTLSAddress, FrameIndex,
JumpTable, ConstantPool, ExternalSymbol, BlockAddress,
// The address of the GOT
GLOBAL_OFFSET_TABLE,
// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
// llvm.returnaddress on the DAG. These nodes take one operand, the index
// of the frame or return address to return. An index of zero corresponds
// to the current function's frame or return address, an index of one to the
// parent's frame or return address, and so on.
FRAMEADDR, RETURNADDR,
// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to
// first (possible) on-stack argument. This is needed for correct stack
// adjustment during unwind.
FRAME_TO_ARGS_OFFSET,
// RESULT, OUTCHAIN = EXCEPTIONADDR(INCHAIN) - This node represents the
// address of the exception block on entry to an landing pad block.
EXCEPTIONADDR,
// RESULT, OUTCHAIN = LSDAADDR(INCHAIN) - This node represents the
// address of the Language Specific Data Area for the enclosing function.
LSDAADDR,
// RESULT, OUTCHAIN = EHSELECTION(INCHAIN, EXCEPTION) - This node represents
// the selection index of the exception thrown.
EHSELECTION,
// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents
// 'eh_return' gcc dwarf builtin, which is used to return from
// exception. The general meaning is: adjust stack by OFFSET and pass
// execution to HANDLER. Many platform-related details also :)
EH_RETURN,
// OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer)
// This corresponds to the eh.sjlj.setjmp intrinsic.
// It takes an input chain and a pointer to the jump buffer as inputs
// and returns an outchain.
EH_SJLJ_SETJMP,
// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer)
// This corresponds to the eh.sjlj.longjmp intrinsic.
// It takes an input chain and a pointer to the jump buffer as inputs
// and returns an outchain.
EH_SJLJ_LONGJMP,
// OUTCHAIN = EH_SJLJ_DISPATCHSETUP(INCHAIN, context)
// This corresponds to the eh.sjlj.dispatchsetup intrinsic. It takes an
// input chain and a pointer to the sjlj function context as inputs and
// returns an outchain. By default, this does nothing. Targets can lower
// this to unwind setup code if needed.
EH_SJLJ_DISPATCHSETUP,
// TargetConstant* - Like Constant*, but the DAG does not do any folding,
// simplification, or lowering of the constant. They are used for constants
// which are known to fit in the immediate fields of their users, or for
// carrying magic numbers which are not values which need to be materialized
// in registers.
TargetConstant,
TargetConstantFP,
// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
// anything else with this node, and this is valid in the target-specific
// dag, turning into a GlobalAddress operand.
TargetGlobalAddress,
TargetGlobalTLSAddress,
TargetFrameIndex,
TargetJumpTable,
TargetConstantPool,
TargetExternalSymbol,
TargetBlockAddress,
/// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with no side effects.
/// The first operand is the ID number of the intrinsic from the
/// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
/// node returns the result of the intrinsic.
INTRINSIC_WO_CHAIN,
/// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
/// This node represents a target intrinsic function with side effects that
/// returns a result. The first operand is a chain pointer. The second is
/// the ID number of the intrinsic from the llvm::Intrinsic namespace. The
/// operands to the intrinsic follow. The node has two results, the result
/// of the intrinsic and an output chain.
INTRINSIC_W_CHAIN,
/// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with side effects that
/// does not return a result. The first operand is a chain pointer. The
/// second is the ID number of the intrinsic from the llvm::Intrinsic
/// namespace. The operands to the intrinsic follow.
INTRINSIC_VOID,
// CopyToReg - This node has three operands: a chain, a register number to
// set to this value, and a value.
CopyToReg,
// CopyFromReg - This node indicates that the input value is a virtual or
// physical register that is defined outside of the scope of this
// SelectionDAG. The register is available from the RegisterSDNode object.
CopyFromReg,
// UNDEF - An undefined node
UNDEF,
// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by
// a Constant, which is required to be operand #1) half of the integer or
// float value specified as operand #0. This is only for use before
// legalization, for values that will be broken into multiple registers.
EXTRACT_ELEMENT,
// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. Given
// two values of the same integer value type, this produces a value twice as
// big. Like EXTRACT_ELEMENT, this can only be used before legalization.
BUILD_PAIR,
// MERGE_VALUES - This node takes multiple discrete operands and returns
// them all as its individual results. This nodes has exactly the same
// number of inputs and outputs. This node is useful for some pieces of the
// code generator that want to think about a single node with multiple
// results, not multiple nodes.
MERGE_VALUES,
// Simple integer binary arithmetic operators.
ADD, SUB, MUL, SDIV, UDIV, SREM, UREM,
// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing
// a signed/unsigned value of type i[2*N], and return the full value as
// two results, each of type iN.
SMUL_LOHI, UMUL_LOHI,
// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
// remainder result.
SDIVREM, UDIVREM,
// CARRY_FALSE - This node is used when folding other nodes,
// like ADDC/SUBC, which indicate the carry result is always false.
CARRY_FALSE,
// Carry-setting nodes for multiple precision addition and subtraction.
// These nodes take two operands of the same value type, and produce two
// results. The first result is the normal add or sub result, the second
// result is the carry flag result.
ADDC, SUBC,
// Carry-using nodes for multiple precision addition and subtraction. These
// nodes take three operands: The first two are the normal lhs and rhs to
// the add or sub, and the third is the input carry flag. These nodes
// produce two results; the normal result of the add or sub, and the output
// carry flag. These nodes both read and write a carry flag to allow them
// to them to be chained together for add and sub of arbitrarily large
// values.
ADDE, SUBE,
// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition.
// These nodes take two operands: the normal LHS and RHS to the add. They
// produce two results: the normal result of the add, and a boolean that
// indicates if an overflow occured (*not* a flag, because it may be stored
// to memory, etc.). If the type of the boolean is not i1 then the high
// bits conform to getBooleanContents.
// These nodes are generated from the llvm.[su]add.with.overflow intrinsics.
SADDO, UADDO,
// Same for subtraction
SSUBO, USUBO,
// Same for multiplication
SMULO, UMULO,
// Simple binary floating point operators.
FADD, FSUB, FMUL, FDIV, FREM,
// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This
// DAG node does not require that X and Y have the same type, just that they
// are both floating point. X and the result must have the same type.
// FCOPYSIGN(f32, f64) is allowed.
FCOPYSIGN,
// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
// value as an integer 0/1 value.
FGETSIGN,
/// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the
/// specified, possibly variable, elements. The number of elements is
/// required to be a power of two. The types of the operands must all be
/// the same and must match the vector element type, except that integer
/// types are allowed to be larger than the element type, in which case
/// the operands are implicitly truncated.
BUILD_VECTOR,
/// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
/// at IDX replaced with VAL. If the type of VAL is larger than the vector
/// element type then VAL is truncated before replacement.
INSERT_VECTOR_ELT,
/// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
/// identified by the (potentially variable) element number IDX. If the
/// return type is an integer type larger than the element type of the
/// vector, the result is extended to the width of the return type.
EXTRACT_VECTOR_ELT,
/// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
/// vector type with the same length and element type, this produces a
/// concatenated vector result value, with length equal to the sum of the
/// lengths of the input vectors.
CONCAT_VECTORS,
/// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector
/// with VECTOR2 inserted into VECTOR1 at the (potentially
/// variable) element number IDX, which must be a multiple of the
/// VECTOR2 vector length. The elements of VECTOR1 starting at
/// IDX are overwritten with VECTOR2. Elements IDX through
/// vector_length(VECTOR2) must be valid VECTOR1 indices.
INSERT_SUBVECTOR,
/// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an
/// vector value) starting with the element number IDX, which must be a
/// constant multiple of the result vector length.
EXTRACT_SUBVECTOR,
/// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as
/// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int
/// values that indicate which value (or undef) each result element will
/// get. These constant ints are accessible through the
/// ShuffleVectorSDNode class. This is quite similar to the Altivec
/// 'vperm' instruction, except that the indices must be constants and are
/// in terms of the element size of VEC1/VEC2, not in terms of bytes.
VECTOR_SHUFFLE,
/// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a
/// scalar value into element 0 of the resultant vector type. The top
/// elements 1 to N-1 of the N-element vector are undefined. The type
/// of the operand must match the vector element type, except when they
/// are integer types. In this case the operand is allowed to be wider
/// than the vector element type, and is implicitly truncated to it.
SCALAR_TO_VECTOR,
// MULHU/MULHS - Multiply high - Multiply two integers of type iN, producing
// an unsigned/signed value of type i[2*N], then return the top part.
MULHU, MULHS,
/// Bitwise operators - logical and, logical or, logical xor.
AND, OR, XOR,
/// Shift and rotation operations. After legalization, the type of the
/// shift amount is known to be TLI.getShiftAmountTy(). Before legalization
/// the shift amount can be any type, but care must be taken to ensure it is
/// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before
/// legalization, types like i1024 can occur and i8 doesn't have enough bits
/// to represent the shift amount. By convention, DAGCombine and
/// SelectionDAGBuilder forces these shift amounts to i32 for simplicity.
///
SHL, SRA, SRL, ROTL, ROTR,
/// Byte Swap and Counting operators.
BSWAP, CTTZ, CTLZ, CTPOP,
// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not
// i1 then the high bits must conform to getBooleanContents.
SELECT,
// Select with condition operator - This selects between a true value and
// a false value (ops #2 and #3) based on the boolean result of comparing
// the lhs and rhs (ops #0 and #1) of a conditional expression with the
// condition code in op #4, a CondCodeSDNode.
SELECT_CC,
// SetCC operator - This evaluates to a true value iff the condition is
// true. If the result value type is not i1 then the high bits conform
// to getBooleanContents. The operands to this are the left and right
// operands to compare (ops #0, and #1) and the condition code to compare
// them with (op #2) as a CondCodeSDNode.
SETCC,
// RESULT = VSETCC(LHS, RHS, COND) operator - This evaluates to a vector of
// integer elements with all bits of the result elements set to true if the
// comparison is true or all cleared if the comparison is false. The
// operands to this are the left and right operands to compare (LHS/RHS) and
// the condition code to compare them with (COND) as a CondCodeSDNode.
VSETCC,
// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded
// integer shift operations, just like ADD/SUB_PARTS. The operation
// ordering is:
// [Lo,Hi] = op [LoLHS,HiLHS], Amt
SHL_PARTS, SRA_PARTS, SRL_PARTS,
// Conversion operators. These are all single input single output
// operations. For all of these, the result type must be strictly
// wider or narrower (depending on the operation) than the source
// type.
// SIGN_EXTEND - Used for integer types, replicating the sign bit
// into new bits.
SIGN_EXTEND,
// ZERO_EXTEND - Used for integer types, zeroing the new bits.
ZERO_EXTEND,
// ANY_EXTEND - Used for integer types. The high bits are undefined.
ANY_EXTEND,
// TRUNCATE - Completely drop the high bits.
TRUNCATE,
// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign
// depends on the first letter) to floating point.
SINT_TO_FP,
UINT_TO_FP,
// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to
// sign extend a small value in a large integer register (e.g. sign
// extending the low 8 bits of a 32-bit register to fill the top 24 bits
// with the 7th bit). The size of the smaller type is indicated by the 1th
// operand, a ValueType node.
SIGN_EXTEND_INREG,
/// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned
/// integer.
FP_TO_SINT,
FP_TO_UINT,
/// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type
/// down to the precision of the destination VT. TRUNC is a flag, which is
/// always an integer that is zero or one. If TRUNC is 0, this is a
/// normal rounding, if it is 1, this FP_ROUND is known to not change the
/// value of Y.
///
/// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like
/// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
/// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
FP_ROUND,
// FLT_ROUNDS_ - Returns current rounding mode:
// -1 Undefined
// 0 Round to 0
// 1 Round to nearest
// 2 Round to +inf
// 3 Round to -inf
FLT_ROUNDS_,
/// X = FP_ROUND_INREG(Y, VT) - This operator takes an FP register, and
/// rounds it to a floating point value. It then promotes it and returns it
/// in a register of the same size. This operation effectively just
/// discards excess precision. The type to round down to is specified by
/// the VT operand, a VTSDNode.
FP_ROUND_INREG,
/// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type.
FP_EXTEND,
// BITCAST - This operator converts between integer, vector and FP
// values, as if the value was stored to memory with one type and loaded
// from the same address with the other type (or equivalently for vector
// format conversions, etc). The source and result are required to have
// the same bit size (e.g. f32 <-> i32). This can also be used for
// int-to-int or fp-to-fp conversions, but that is a noop, deleted by
// getNode().
BITCAST,
// CONVERT_RNDSAT - This operator is used to support various conversions
// between various types (float, signed, unsigned and vectors of those
// types) with rounding and saturation. NOTE: Avoid using this operator as
// most target don't support it and the operator might be removed in the
// future. It takes the following arguments:
// 0) value
// 1) dest type (type to convert to)
// 2) src type (type to convert from)
// 3) rounding imm
// 4) saturation imm
// 5) ISD::CvtCode indicating the type of conversion to do
CONVERT_RNDSAT,
// FP16_TO_FP32, FP32_TO_FP16 - These operators are used to perform
// promotions and truncation for half-precision (16 bit) floating
// numbers. We need special nodes since FP16 is a storage-only type with
// special semantics of operations.
FP16_TO_FP32, FP32_TO_FP16,
// FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
// FLOG, FLOG2, FLOG10, FEXP, FEXP2,
// FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR - Perform various unary floating
// point operations. These are inspired by libm.
FNEG, FABS, FSQRT, FSIN, FCOS, FPOWI, FPOW,
FLOG, FLOG2, FLOG10, FEXP, FEXP2,
FCEIL, FTRUNC, FRINT, FNEARBYINT, FFLOOR,
// LOAD and STORE have token chains as their first operand, then the same
// operands as an LLVM load/store instruction, then an offset node that
// is added / subtracted from the base pointer to form the address (for
// indexed memory ops).
LOAD, STORE,
// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned
// to a specified boundary. This node always has two return values: a new
// stack pointer value and a chain. The first operand is the token chain,
// the second is the number of bytes to allocate, and the third is the
// alignment boundary. The size is guaranteed to be a multiple of the stack
// alignment, and the alignment is guaranteed to be bigger than the stack
// alignment (if required) or 0 to get standard stack alignment.
DYNAMIC_STACKALLOC,
// Control flow instructions. These all have token chains.
// BR - Unconditional branch. The first operand is the chain
// operand, the second is the MBB to branch to.
BR,
// BRIND - Indirect branch. The first operand is the chain, the second
// is the value to branch to, which must be of the same type as the target's
// pointer type.
BRIND,
// BR_JT - Jumptable branch. The first operand is the chain, the second
// is the jumptable index, the last one is the jumptable entry index.
BR_JT,
// BRCOND - Conditional branch. The first operand is the chain, the
// second is the condition, the third is the block to branch to if the
// condition is true. If the type of the condition is not i1, then the
// high bits must conform to getBooleanContents.
BRCOND,
// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in
// that the condition is represented as condition code, and two nodes to
// compare, rather than as a combined SetCC node. The operands in order are
// chain, cc, lhs, rhs, block to branch to if condition is true.
BR_CC,
// INLINEASM - Represents an inline asm block. This node always has two
// return values: a chain and a flag result. The inputs are as follows:
// Operand #0 : Input chain.
// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string.
// Operand #2 : a MDNodeSDNode with the !srcloc metadata.
// Operand #3 : HasSideEffect, IsAlignStack bits.
// After this, it is followed by a list of operands with this format:
// ConstantSDNode: Flags that encode whether it is a mem or not, the
// of operands that follow, etc. See InlineAsm.h.
// ... however many operands ...
// Operand #last: Optional, an incoming flag.
//
// The variable width operands are required to represent target addressing
// modes as a single "operand", even though they may have multiple
// SDOperands.
INLINEASM,
// EH_LABEL - Represents a label in mid basic block used to track
// locations needed for debug and exception handling tables. These nodes
// take a chain as input and return a chain.
EH_LABEL,
// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
// value, the same type as the pointer type for the system, and an output
// chain.
STACKSAVE,
// STACKRESTORE has two operands, an input chain and a pointer to restore to
// it returns an output chain.
STACKRESTORE,
// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end of
// a call sequence, and carry arbitrary information that target might want
// to know. The first operand is a chain, the rest are specified by the
// target and not touched by the DAG optimizers.
// CALLSEQ_START..CALLSEQ_END pairs may not be nested.
CALLSEQ_START, // Beginning of a call sequence
CALLSEQ_END, // End of a call sequence
// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE,
// and the alignment. It returns a pair of values: the vaarg value and a
// new chain.
VAARG,
// VACOPY - VACOPY has five operands: an input chain, a destination pointer,
// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
// source.
VACOPY,
// VAEND, VASTART - VAEND and VASTART have three operands: an input chain, a
// pointer, and a SRCVALUE.
VAEND, VASTART,
// SRCVALUE - This is a node type that holds a Value* that is used to
// make reference to a value in the LLVM IR.
SRCVALUE,
// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to
// reference metadata in the IR.
MDNODE_SDNODE,
// PCMARKER - This corresponds to the pcmarker intrinsic.
PCMARKER,
// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
// The only operand is a chain and a value and a chain are produced. The
// value is the contents of the architecture specific cycle counter like
// register (or other high accuracy low latency clock source)
READCYCLECOUNTER,
// HANDLENODE node - Used as a handle for various purposes.
HANDLENODE,
// TRAMPOLINE - This corresponds to the init_trampoline intrinsic.
// It takes as input a token chain, the pointer to the trampoline,
// the pointer to the nested function, the pointer to pass for the
// 'nest' parameter, a SRCVALUE for the trampoline and another for
// the nested function (allowing targets to access the original
// Function*). It produces the result of the intrinsic and a token
// chain as output.
TRAMPOLINE,
// TRAP - Trapping instruction
TRAP,
// PREFETCH - This corresponds to a prefetch intrinsic. It takes chains are
// their first operand. The other operands are the address to prefetch,
// read / write specifier, and locality specifier.
PREFETCH,
// OUTCHAIN = MEMBARRIER(INCHAIN, load-load, load-store, store-load,
// store-store, device)
// This corresponds to the memory.barrier intrinsic.
// it takes an input chain, 4 operands to specify the type of barrier, an
// operand specifying if the barrier applies to device and uncached memory
// and produces an output chain.
MEMBARRIER,
// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap)
// this corresponds to the atomic.lcs intrinsic.
// cmp is compared to *ptr, and if equal, swap is stored in *ptr.
// the return is always the original value in *ptr
ATOMIC_CMP_SWAP,
// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt)
// this corresponds to the atomic.swap intrinsic.
// amt is stored to *ptr atomically.
// the return is always the original value in *ptr
ATOMIC_SWAP,
// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt)
// this corresponds to the atomic.load.[OpName] intrinsic.
// op(*ptr, amt) is stored to *ptr atomically.
// the return is always the original value in *ptr
ATOMIC_LOAD_ADD,
ATOMIC_LOAD_SUB,
ATOMIC_LOAD_AND,
ATOMIC_LOAD_OR,
ATOMIC_LOAD_XOR,
ATOMIC_LOAD_NAND,
ATOMIC_LOAD_MIN,
ATOMIC_LOAD_MAX,
ATOMIC_LOAD_UMIN,
ATOMIC_LOAD_UMAX,
/// BUILTIN_OP_END - This must be the last enum value in this list.
/// The target-specific pre-isel opcode values start here.
BUILTIN_OP_END
};
/// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations
/// which do not reference a specific memory location should be less than
/// this value. Those that do must not be less than this value, and can
/// be used with SelectionDAG::getMemIntrinsicNode.
static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END+150;
//===--------------------------------------------------------------------===//
/// MemIndexedMode enum - This enum defines the load / store indexed
/// addressing modes.
///
/// UNINDEXED "Normal" load / store. The effective address is already
/// computed and is available in the base pointer. The offset
/// operand is always undefined. In addition to producing a
/// chain, an unindexed load produces one value (result of the
/// load); an unindexed store does not produce a value.
///
/// PRE_INC Similar to the unindexed mode where the effective address is
/// PRE_DEC the value of the base pointer add / subtract the offset.
/// It considers the computation as being folded into the load /
/// store operation (i.e. the load / store does the address
/// computation as well as performing the memory transaction).
/// The base operand is always undefined. In addition to
/// producing a chain, pre-indexed load produces two values
/// (result of the load and the result of the address
/// computation); a pre-indexed store produces one value (result
/// of the address computation).
///
/// POST_INC The effective address is the value of the base pointer. The
/// POST_DEC value of the offset operand is then added to / subtracted
/// from the base after memory transaction. In addition to
/// producing a chain, post-indexed load produces two values
/// (the result of the load and the result of the base +/- offset
/// computation); a post-indexed store produces one value (the
/// the result of the base +/- offset computation).
enum MemIndexedMode {
UNINDEXED = 0,
PRE_INC,
PRE_DEC,
POST_INC,
POST_DEC,
LAST_INDEXED_MODE
};
//===--------------------------------------------------------------------===//
/// LoadExtType enum - This enum defines the three variants of LOADEXT
/// (load with extension).
///
/// SEXTLOAD loads the integer operand and sign extends it to a larger
/// integer result type.
/// ZEXTLOAD loads the integer operand and zero extends it to a larger
/// integer result type.
/// EXTLOAD is used for two things: floating point extending loads and
/// integer extending loads [the top bits are undefined].
enum LoadExtType {
NON_EXTLOAD = 0,
EXTLOAD,
SEXTLOAD,
ZEXTLOAD,
LAST_LOADEXT_TYPE
};
//===--------------------------------------------------------------------===//
/// ISD::CondCode enum - These are ordered carefully to make the bitfields
/// below work out, when considering SETFALSE (something that never exists
/// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered
/// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal
/// to. If the "N" column is 1, the result of the comparison is undefined if
/// the input is a NAN.
///
/// All of these (except for the 'always folded ops') should be handled for
/// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT,
/// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used.
///
/// Note that these are laid out in a specific order to allow bit-twiddling
/// to transform conditions.
enum CondCode {
// Opcode N U L G E Intuitive operation
SETFALSE, // 0 0 0 0 Always false (always folded)
SETOEQ, // 0 0 0 1 True if ordered and equal
SETOGT, // 0 0 1 0 True if ordered and greater than
SETOGE, // 0 0 1 1 True if ordered and greater than or equal
SETOLT, // 0 1 0 0 True if ordered and less than
SETOLE, // 0 1 0 1 True if ordered and less than or equal
SETONE, // 0 1 1 0 True if ordered and operands are unequal
SETO, // 0 1 1 1 True if ordered (no nans)
SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y)
SETUEQ, // 1 0 0 1 True if unordered or equal
SETUGT, // 1 0 1 0 True if unordered or greater than
SETUGE, // 1 0 1 1 True if unordered, greater than, or equal
SETULT, // 1 1 0 0 True if unordered or less than
SETULE, // 1 1 0 1 True if unordered, less than, or equal
SETUNE, // 1 1 1 0 True if unordered or not equal
SETTRUE, // 1 1 1 1 Always true (always folded)
// Don't care operations: undefined if the input is a nan.
SETFALSE2, // 1 X 0 0 0 Always false (always folded)
SETEQ, // 1 X 0 0 1 True if equal
SETGT, // 1 X 0 1 0 True if greater than
SETGE, // 1 X 0 1 1 True if greater than or equal
SETLT, // 1 X 1 0 0 True if less than
SETLE, // 1 X 1 0 1 True if less than or equal
SETNE, // 1 X 1 1 0 True if not equal
SETTRUE2, // 1 X 1 1 1 Always true (always folded)
SETCC_INVALID // Marker value.
};
/// isSignedIntSetCC - Return true if this is a setcc instruction that
/// performs a signed comparison when used with integer operands.
inline bool isSignedIntSetCC(CondCode Code) {
return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE;
}
/// isUnsignedIntSetCC - Return true if this is a setcc instruction that
/// performs an unsigned comparison when used with integer operands.
inline bool isUnsignedIntSetCC(CondCode Code) {
return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE;
}
/// isTrueWhenEqual - Return true if the specified condition returns true if
/// the two operands to the condition are equal. Note that if one of the two
/// operands is a NaN, this value is meaningless.
inline bool isTrueWhenEqual(CondCode Cond) {
return ((int)Cond & 1) != 0;
}
/// getUnorderedFlavor - This function returns 0 if the condition is always
/// false if an operand is a NaN, 1 if the condition is always true if the
/// operand is a NaN, and 2 if the condition is undefined if the operand is a
/// NaN.
inline unsigned getUnorderedFlavor(CondCode Cond) {
return ((int)Cond >> 3) & 3;
}
/// getSetCCInverse - Return the operation corresponding to !(X op Y), where
/// 'op' is a valid SetCC operation.
CondCode getSetCCInverse(CondCode Operation, bool isInteger);
/// getSetCCSwappedOperands - Return the operation corresponding to (Y op X)
/// when given the operation for (X op Y).
CondCode getSetCCSwappedOperands(CondCode Operation);
/// getSetCCOrOperation - Return the result of a logical OR between different
/// comparisons of identical values: ((X op1 Y) | (X op2 Y)). This
/// function returns SETCC_INVALID if it is not possible to represent the
/// resultant comparison.
CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, bool isInteger);
/// getSetCCAndOperation - Return the result of a logical AND between
/// different comparisons of identical values: ((X op1 Y) & (X op2 Y)). This
/// function returns SETCC_INVALID if it is not possible to represent the
/// resultant comparison.
CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, bool isInteger);
//===--------------------------------------------------------------------===//
/// CvtCode enum - This enum defines the various converts CONVERT_RNDSAT
/// supports.
enum CvtCode {
CVT_FF, // Float from Float
CVT_FS, // Float from Signed
CVT_FU, // Float from Unsigned
CVT_SF, // Signed from Float
CVT_UF, // Unsigned from Float
CVT_SS, // Signed from Signed
CVT_SU, // Signed from Unsigned
CVT_US, // Unsigned from Signed
CVT_UU, // Unsigned from Unsigned
CVT_INVALID // Marker - Invalid opcode
};
} // end llvm::ISD namespace
} // end llvm namespace
#endif