llvm-6502/lib/Target/TargetSelectionDAG.td
Chris Lattner d2c339cca7 Fix typo :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24664 91177308-0d34-0410-b5e6-96231b3b80d8
2005-12-11 18:43:13 +00:00

389 lines
16 KiB
TableGen

//===- TargetSelectionDAG.td - Common code for DAG isels ---*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the target-independent interfaces used by SelectionDAG
// instruction selection generators.
//
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Selection DAG Type Constraint definitions.
//
// Note that the semantics of these constraints are hard coded into tblgen. To
// modify or add constraints, you have to hack tblgen.
//
class SDTypeConstraint<int opnum> {
int OperandNum = opnum;
}
// SDTCisVT - The specified operand has exactly this VT.
class SDTCisVT<int OpNum, ValueType vt> : SDTypeConstraint<OpNum> {
ValueType VT = vt;
}
class SDTCisPtrTy<int OpNum> : SDTypeConstraint<OpNum>;
// SDTCisInt - The specified operand is has integer type.
class SDTCisInt<int OpNum> : SDTypeConstraint<OpNum>;
// SDTCisFP - The specified operand is has floating point type.
class SDTCisFP<int OpNum> : SDTypeConstraint<OpNum>;
// SDTCisSameAs - The two specified operands have identical types.
class SDTCisSameAs<int OpNum, int OtherOp> : SDTypeConstraint<OpNum> {
int OtherOperandNum = OtherOp;
}
// SDTCisVTSmallerThanOp - The specified operand is a VT SDNode, and its type is
// smaller than the 'Other' operand.
class SDTCisVTSmallerThanOp<int OpNum, int OtherOp> : SDTypeConstraint<OpNum> {
int OtherOperandNum = OtherOp;
}
class SDTCisOpSmallerThanOp<int SmallOp, int BigOp> : SDTypeConstraint<SmallOp>{
int BigOperandNum = BigOp;
}
//===----------------------------------------------------------------------===//
// Selection DAG Type Profile definitions.
//
// These use the constraints defined above to describe the type requirements of
// the various nodes. These are not hard coded into tblgen, allowing targets to
// add their own if needed.
//
// SDTypeProfile - This profile describes the type requirements of a Selection
// DAG node.
class SDTypeProfile<int numresults, int numoperands,
list<SDTypeConstraint> constraints> {
int NumResults = numresults;
int NumOperands = numoperands;
list<SDTypeConstraint> Constraints = constraints;
}
// Builtin profiles.
def SDTIntLeaf: SDTypeProfile<1, 0, [SDTCisInt<0>]>; // for 'imm'.
def SDTPtrLeaf: SDTypeProfile<1, 0, [SDTCisPtrTy<0>]>; // for '&g'.
def SDTOther : SDTypeProfile<1, 0, [SDTCisVT<0, OtherVT>]>; // for 'vt'.
def SDTUNDEF : SDTypeProfile<1, 0, []>; // for 'undef'.
def SDTIntBinOp : SDTypeProfile<1, 2, [ // add, and, or, xor, udiv, etc.
SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>, SDTCisInt<0>
]>;
def SDTIntShiftOp : SDTypeProfile<1, 2, [ // shl, sra, srl
SDTCisSameAs<0, 1>, SDTCisInt<0>, SDTCisInt<2>
]>;
def SDTFPBinOp : SDTypeProfile<1, 2, [ // fadd, fmul, etc.
SDTCisSameAs<0, 1>, SDTCisSameAs<0, 2>, SDTCisFP<0>
]>;
def SDTIntUnaryOp : SDTypeProfile<1, 1, [ // ctlz
SDTCisSameAs<0, 1>, SDTCisInt<0>
]>;
def SDTIntExtendOp : SDTypeProfile<1, 1, [ // sext, zext, anyext
SDTCisInt<0>, SDTCisInt<1>, SDTCisOpSmallerThanOp<1, 0>
]>;
def SDTIntTruncOp : SDTypeProfile<1, 1, [ // trunc
SDTCisInt<0>, SDTCisInt<1>, SDTCisOpSmallerThanOp<0, 1>
]>;
def SDTFPUnaryOp : SDTypeProfile<1, 1, [ // fneg, fsqrt, etc
SDTCisSameAs<0, 1>, SDTCisFP<0>
]>;
def SDTFPRoundOp : SDTypeProfile<1, 1, [ // fround
SDTCisFP<0>, SDTCisFP<1>, SDTCisOpSmallerThanOp<0, 1>
]>;
def SDTFPExtendOp : SDTypeProfile<1, 1, [ // fextend
SDTCisFP<0>, SDTCisFP<1>, SDTCisOpSmallerThanOp<1, 0>
]>;
def SDTIntToFPOp : SDTypeProfile<1, 1, [ // [su]int_to_fp
SDTCisFP<0>, SDTCisInt<1>
]>;
def SDTFPToIntOp : SDTypeProfile<1, 1, [ // fp_to_[su]int
SDTCisInt<0>, SDTCisFP<1>
]>;
def SDTExtInreg : SDTypeProfile<1, 2, [ // sext_inreg
SDTCisSameAs<0, 1>, SDTCisInt<0>, SDTCisVT<2, OtherVT>,
SDTCisVTSmallerThanOp<2, 1>
]>;
def SDTSetCC : SDTypeProfile<1, 3, [ // setcc
SDTCisInt<0>, SDTCisSameAs<1, 2>, SDTCisVT<3, OtherVT>
]>;
def SDTSelect : SDTypeProfile<1, 3, [ // select
SDTCisInt<1>, SDTCisSameAs<0, 2>, SDTCisSameAs<2, 3>
]>;
def SDTSelectCC : SDTypeProfile<1, 5, [ // select_cc
SDTCisSameAs<1, 2>, SDTCisSameAs<3, 4>, SDTCisSameAs<0, 3>,
SDTCisVT<5, OtherVT>
]>;
def SDTBr : SDTypeProfile<0, 1, [ // br
SDTCisVT<0, OtherVT>
]>;
def SDTBrCond : SDTypeProfile<0, 2, [ // brcond
SDTCisInt<0>, SDTCisVT<1, OtherVT>
]>;
def SDTRet : SDTypeProfile<0, 0, [ // ret
]>;
def SDTWritePort : SDTypeProfile<0, 2, [ // writeport
SDTCisInt<0>, SDTCisInt<1>
]>;
def SDTLoad : SDTypeProfile<1, 1, [ // load
SDTCisPtrTy<1>
]>;
def SDTStore : SDTypeProfile<0, 2, [ // store
SDTCisPtrTy<1>
]>;
//===----------------------------------------------------------------------===//
// Selection DAG Node Properties.
//
// Note: These are hard coded into tblgen.
//
class SDNodeProperty;
def SDNPCommutative : SDNodeProperty; // X op Y == Y op X
def SDNPAssociative : SDNodeProperty; // (X op Y) op Z == X op (Y op Z)
def SDNPHasChain : SDNodeProperty; // R/W chain operand and result
//===----------------------------------------------------------------------===//
// Selection DAG Node definitions.
//
class SDNode<string opcode, SDTypeProfile typeprof,
list<SDNodeProperty> props = [], string sdclass = "SDNode"> {
string Opcode = opcode;
string SDClass = sdclass;
list<SDNodeProperty> Properties = props;
SDTypeProfile TypeProfile = typeprof;
}
def set;
def node;
def imm : SDNode<"ISD::Constant" , SDTIntLeaf , [], "ConstantSDNode">;
def vt : SDNode<"ISD::VALUETYPE" , SDTOther , [], "VTSDNode">;
def bb : SDNode<"ISD::BasicBlock", SDTOther , [], "BasicBlockSDNode">;
def cond : SDNode<"ISD::CONDCODE" , SDTOther , [], "CondCodeSDNode">;
def undef : SDNode<"ISD::UNDEF" , SDTUNDEF , []>;
def globaladdr : SDNode<"ISD::GlobalAddress", SDTPtrLeaf, [],
"GlobalAddressSDNode">;
def tglobaladdr : SDNode<"ISD::TargetGlobalAddress", SDTPtrLeaf, [],
"GlobalAddressSDNode">;
def tconstpool : SDNode<"ISD::TargetConstantPool", SDTPtrLeaf, [],
"ConstantPoolSDNode">;
def add : SDNode<"ISD::ADD" , SDTIntBinOp ,
[SDNPCommutative, SDNPAssociative]>;
def sub : SDNode<"ISD::SUB" , SDTIntBinOp>;
def mul : SDNode<"ISD::MUL" , SDTIntBinOp,
[SDNPCommutative, SDNPAssociative]>;
def mulhs : SDNode<"ISD::MULHS" , SDTIntBinOp, [SDNPCommutative]>;
def mulhu : SDNode<"ISD::MULHU" , SDTIntBinOp, [SDNPCommutative]>;
def sdiv : SDNode<"ISD::SDIV" , SDTIntBinOp>;
def udiv : SDNode<"ISD::UDIV" , SDTIntBinOp>;
def srem : SDNode<"ISD::SREM" , SDTIntBinOp>;
def urem : SDNode<"ISD::UREM" , SDTIntBinOp>;
def srl : SDNode<"ISD::SRL" , SDTIntShiftOp>;
def sra : SDNode<"ISD::SRA" , SDTIntShiftOp>;
def shl : SDNode<"ISD::SHL" , SDTIntShiftOp>;
def and : SDNode<"ISD::AND" , SDTIntBinOp,
[SDNPCommutative, SDNPAssociative]>;
def or : SDNode<"ISD::OR" , SDTIntBinOp,
[SDNPCommutative, SDNPAssociative]>;
def xor : SDNode<"ISD::XOR" , SDTIntBinOp,
[SDNPCommutative, SDNPAssociative]>;
def sext_inreg : SDNode<"ISD::SIGN_EXTEND_INREG", SDTExtInreg>;
def ctlz : SDNode<"ISD::CTLZ" , SDTIntUnaryOp>;
def cttz : SDNode<"ISD::CTTZ" , SDTIntUnaryOp>;
def ctpop : SDNode<"ISD::CTPOP" , SDTIntUnaryOp>;
def sext : SDNode<"ISD::SIGN_EXTEND", SDTIntExtendOp>;
def zext : SDNode<"ISD::ZERO_EXTEND", SDTIntExtendOp>;
def anyext : SDNode<"ISD::ANY_EXTEND" , SDTIntExtendOp>;
def trunc : SDNode<"ISD::TRUNCATE" , SDTIntTruncOp>;
def fadd : SDNode<"ISD::FADD" , SDTFPBinOp, [SDNPCommutative]>;
def fsub : SDNode<"ISD::FSUB" , SDTFPBinOp>;
def fmul : SDNode<"ISD::FMUL" , SDTFPBinOp, [SDNPCommutative]>;
def fdiv : SDNode<"ISD::FDIV" , SDTFPBinOp>;
def frem : SDNode<"ISD::FREM" , SDTFPBinOp>;
def fabs : SDNode<"ISD::FABS" , SDTFPUnaryOp>;
def fneg : SDNode<"ISD::FNEG" , SDTFPUnaryOp>;
def fsqrt : SDNode<"ISD::FSQRT" , SDTFPUnaryOp>;
def fround : SDNode<"ISD::FP_ROUND" , SDTFPRoundOp>;
def fextend : SDNode<"ISD::FP_EXTEND" , SDTFPExtendOp>;
def sint_to_fp : SDNode<"ISD::SINT_TO_FP" , SDTIntToFPOp>;
def uint_to_fp : SDNode<"ISD::UINT_TO_FP" , SDTIntToFPOp>;
def fp_to_sint : SDNode<"ISD::FP_TO_SINT" , SDTFPToIntOp>;
def fp_to_uint : SDNode<"ISD::FP_TO_UINT" , SDTFPToIntOp>;
def setcc : SDNode<"ISD::SETCC" , SDTSetCC>;
def select : SDNode<"ISD::SELECT" , SDTSelect>;
def selectcc : SDNode<"ISD::SELECT_CC" , SDTSelectCC>;
def br : SDNode<"ISD::BR" , SDTBr, [SDNPHasChain]>;
def brcond : SDNode<"ISD::BRCOND" , SDTBrCond, [SDNPHasChain]>;
def ret : SDNode<"ISD::RET" , SDTRet, [SDNPHasChain]>;
def writeport : SDNode<"ISD::WRITEPORT" , SDTWritePort, [SDNPHasChain]>;
def load : SDNode<"ISD::LOAD" , SDTLoad, [SDNPHasChain]>;
def store : SDNode<"ISD::STORE" , SDTStore, [SDNPHasChain]>;
//===----------------------------------------------------------------------===//
// Selection DAG Condition Codes
class CondCode; // ISD::CondCode enums
def SETOEQ : CondCode; def SETOGT : CondCode;
def SETOGE : CondCode; def SETOLT : CondCode; def SETOLE : CondCode;
def SETONE : CondCode; def SETO : CondCode; def SETUO : CondCode;
def SETUEQ : CondCode; def SETUGT : CondCode; def SETUGE : CondCode;
def SETULT : CondCode; def SETULE : CondCode; def SETUNE : CondCode;
def SETEQ : CondCode; def SETGT : CondCode; def SETGE : CondCode;
def SETLT : CondCode; def SETLE : CondCode; def SETNE : CondCode;
//===----------------------------------------------------------------------===//
// Selection DAG Node Transformation Functions.
//
// This mechanism allows targets to manipulate nodes in the output DAG once a
// match has been formed. This is typically used to manipulate immediate
// values.
//
class SDNodeXForm<SDNode opc, code xformFunction> {
SDNode Opcode = opc;
code XFormFunction = xformFunction;
}
def NOOP_SDNodeXForm : SDNodeXForm<imm, [{}]>;
//===----------------------------------------------------------------------===//
// Selection DAG Pattern Fragments.
//
// Pattern fragments are reusable chunks of dags that match specific things.
// They can take arguments and have C++ predicates that control whether they
// match. They are intended to make the patterns for common instructions more
// compact and readable.
//
/// PatFrag - Represents a pattern fragment. This can match something on the
/// DAG, frame a single node to multiply nested other fragments.
///
class PatFrag<dag ops, dag frag, code pred = [{}],
SDNodeXForm xform = NOOP_SDNodeXForm> {
dag Operands = ops;
dag Fragment = frag;
code Predicate = pred;
SDNodeXForm OperandTransform = xform;
}
// PatLeaf's are pattern fragments that have no operands. This is just a helper
// to define immediates and other common things concisely.
class PatLeaf<dag frag, code pred = [{}], SDNodeXForm xform = NOOP_SDNodeXForm>
: PatFrag<(ops), frag, pred, xform>;
// Leaf fragments.
def immAllOnes : PatLeaf<(imm), [{ return N->isAllOnesValue(); }]>;
def vtInt : PatLeaf<(vt), [{ return MVT::isInteger(N->getVT()); }]>;
def vtFP : PatLeaf<(vt), [{ return MVT::isFloatingPoint(N->getVT()); }]>;
// Other helper fragments.
def not : PatFrag<(ops node:$in), (xor node:$in, immAllOnes)>;
def ineg : PatFrag<(ops node:$in), (sub 0, node:$in)>;
// setcc convenience fragments.
def setoeq : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETOEQ)>;
def setogt : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETOGT)>;
def setoge : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETOGE)>;
def setolt : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETOLT)>;
def setole : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETOLE)>;
def setone : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETONE)>;
def seto : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETO)>;
def setuo : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETUO)>;
def setueq : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETUEQ)>;
def setugt : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETUGT)>;
def setuge : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETUGE)>;
def setult : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETULT)>;
def setule : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETULE)>;
def setune : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETUNE)>;
def seteq : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETEQ)>;
def setgt : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETGT)>;
def setge : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETGE)>;
def setlt : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETLT)>;
def setle : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETLE)>;
def setne : PatFrag<(ops node:$lhs, node:$rhs),
(setcc node:$lhs, node:$rhs, SETNE)>;
//===----------------------------------------------------------------------===//
// Selection DAG Pattern Support.
//
// Patterns are what are actually matched against the target-flavored
// instruction selection DAG. Instructions defined by the target implicitly
// define patterns in most cases, but patterns can also be explicitly added when
// an operation is defined by a sequence of instructions (e.g. loading a large
// immediate value on RISC targets that do not support immediates as large as
// their GPRs).
//
class Pattern<dag patternToMatch, list<dag> resultInstrs> {
dag PatternToMatch = patternToMatch;
list<dag> ResultInstrs = resultInstrs;
}
// Pat - A simple (but common) form of a pattern, which produces a simple result
// not needing a full list.
class Pat<dag pattern, dag result> : Pattern<pattern, [result]>;
//===----------------------------------------------------------------------===//
// Complex pattern definitions.
//
// Complex patterns, e.g. X86 addressing mode, requires pattern matching code
// in C++. NumOperands is the number of operands returned by the select function;
// SelectFunc is the name of the function used to pattern match the max. pattern;
// RootNodes are the list of possible root nodes of the sub-dags to match.
// e.g. X86 addressing mode - def addr : ComplexPattern<4, "SelectAddr", [add]>;
//
class ComplexPattern<ValueType ty, int numops, string fn, list<SDNode> roots = []> {
ValueType Ty = ty;
int NumOperands = numops;
string SelectFunc = fn;
list<SDNode> RootNodes = roots;
}