llvm-6502/test/CodeGen/SystemZ/insert-02.ll
Stephen Lin 8b2b8a1835 Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
This update was done with the following bash script:

  find test/CodeGen -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
      done
      sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
      sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
      sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
      sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00

231 lines
5.6 KiB
LLVM

; Test insertions of memory into the low byte of an i64.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s
; Check a plain insertion with (or (and ... -0xff) (zext (load ....))).
; The whole sequence can be performed by IC.
define i64 @f1(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f1:
; CHECK-NOT: ni
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = and i64 %orig, -256
%or = or i64 %ptr1, %ptr2
ret i64 %or
}
; Like f1, but with the operands reversed.
define i64 @f2(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f2:
; CHECK-NOT: ni
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = and i64 %orig, -256
%or = or i64 %ptr2, %ptr1
ret i64 %or
}
; Check a case where more bits than lower 8 are masked out of the
; register value. We can use IC but must keep the original mask.
define i64 @f3(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f3:
; CHECK: risbg %r2, %r2, 0, 182, 0
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = and i64 %orig, -512
%or = or i64 %ptr1, %ptr2
ret i64 %or
}
; Like f3, but with the operands reversed.
define i64 @f4(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f4:
; CHECK: risbg %r2, %r2, 0, 182, 0
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = and i64 %orig, -512
%or = or i64 %ptr2, %ptr1
ret i64 %or
}
; Check a case where the low 8 bits are cleared by a shift left.
define i64 @f5(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f5:
; CHECK: sllg %r2, %r2, 8
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = shl i64 %orig, 8
%or = or i64 %ptr1, %ptr2
ret i64 %or
}
; Like f5, but with the operands reversed.
define i64 @f6(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f6:
; CHECK: sllg %r2, %r2, 8
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%ptr1 = shl i64 %orig, 8
%or = or i64 %ptr2, %ptr1
ret i64 %or
}
; Check insertions into a constant.
define i64 @f7(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f7:
; CHECK: lghi %r2, 256
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%or = or i64 %ptr2, 256
ret i64 %or
}
; Like f7, but with the operands reversed.
define i64 @f8(i64 %orig, i8 *%ptr) {
; CHECK-LABEL: f8:
; CHECK: lghi %r2, 256
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%val = load i8 *%ptr
%ptr2 = zext i8 %val to i64
%or = or i64 256, %ptr2
ret i64 %or
}
; Check the high end of the IC range.
define i64 @f9(i64 %orig, i8 *%src) {
; CHECK-LABEL: f9:
; CHECK: ic %r2, 4095(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 4095
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the next byte up, which should use ICY instead of IC.
define i64 @f10(i64 %orig, i8 *%src) {
; CHECK-LABEL: f10:
; CHECK: icy %r2, 4096(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 4096
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the high end of the ICY range.
define i64 @f11(i64 %orig, i8 *%src) {
; CHECK-LABEL: f11:
; CHECK: icy %r2, 524287(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 524287
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the next byte up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i64 @f12(i64 %orig, i8 *%src) {
; CHECK-LABEL: f12:
; CHECK: agfi %r3, 524288
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 524288
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the high end of the negative ICY range.
define i64 @f13(i64 %orig, i8 *%src) {
; CHECK-LABEL: f13:
; CHECK: icy %r2, -1(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 -1
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the low end of the ICY range.
define i64 @f14(i64 %orig, i8 *%src) {
; CHECK-LABEL: f14:
; CHECK: icy %r2, -524288(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 -524288
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check the next byte down, which needs separate address logic.
; Other sequences besides this one would be OK.
define i64 @f15(i64 %orig, i8 *%src) {
; CHECK-LABEL: f15:
; CHECK: agfi %r3, -524289
; CHECK: ic %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i8 *%src, i64 -524289
%val = load i8 *%ptr
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check that IC allows an index.
define i64 @f16(i64 %orig, i8 *%src, i64 %index) {
; CHECK-LABEL: f16:
; CHECK: ic %r2, 4095({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%ptr1 = getelementptr i8 *%src, i64 %index
%ptr2 = getelementptr i8 *%ptr1, i64 4095
%val = load i8 *%ptr2
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}
; Check that ICY allows an index.
define i64 @f17(i64 %orig, i8 *%src, i64 %index) {
; CHECK-LABEL: f17:
; CHECK: icy %r2, 4096({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%ptr1 = getelementptr i8 *%src, i64 %index
%ptr2 = getelementptr i8 *%ptr1, i64 4096
%val = load i8 *%ptr2
%src2 = zext i8 %val to i64
%src1 = and i64 %orig, -256
%or = or i64 %src2, %src1
ret i64 %or
}