llvm-6502/test/CodeGen/Thumb/stack-access.ll
John Brawn 151a5da534 [ARM] Fix handling of thumb1 out-of-range frame offsets
LocalStackSlotPass assumes that isFrameOffsetLegal doesn't change its
answer when the base register changes. Unfortunately this isn't true
in thumb1, where SP-based loads allow a larger offset than
non-SP-based loads, and this causes the base register reuse code to
generate instructions that are unencodable, causing an assertion
failure. 

Solve this by adding a BaseReg parameter to isFrameOffsetLegal, which
ARMBaseRegisterInfo can then make use of to give the correct answer. 

Differential Revision: http://reviews.llvm.org/D8419


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232825 91177308-0d34-0410-b5e6-96231b3b80d8
2015-03-20 17:20:07 +00:00

128 lines
3.6 KiB
LLVM

; RUN: llc -mtriple=thumb-eabi < %s -o - | FileCheck %s
; Check that stack addresses are generated using a single ADD
define void @test1(i8** %p) {
%x = alloca i8, align 1
%y = alloca i8, align 1
%z = alloca i8, align 1
; CHECK: add r1, sp, #8
; CHECK: str r1, [r0]
store i8* %x, i8** %p, align 4
; CHECK: add r1, sp, #4
; CHECK: str r1, [r0]
store i8* %y, i8** %p, align 4
; CHECK: mov r1, sp
; CHECK: str r1, [r0]
store i8* %z, i8** %p, align 4
ret void
}
; Stack offsets larger than 1020 still need two ADDs
define void @test2([1024 x i8]** %p) {
%arr1 = alloca [1024 x i8], align 1
%arr2 = alloca [1024 x i8], align 1
; CHECK: add r1, sp, #1020
; CHECK: adds r1, #4
; CHECK: str r1, [r0]
store [1024 x i8]* %arr1, [1024 x i8]** %p, align 4
; CHECK: mov r1, sp
; CHECK: str r1, [r0]
store [1024 x i8]* %arr2, [1024 x i8]** %p, align 4
ret void
}
; If possible stack-based lrdb/ldrh are widened to use SP-based addressing
define i32 @test3() #0 {
%x = alloca i8, align 1
%y = alloca i8, align 1
; CHECK: ldr r0, [sp]
%1 = load i8, i8* %x, align 1
; CHECK: ldr r1, [sp, #4]
%2 = load i8, i8* %y, align 1
%3 = add nsw i8 %1, %2
%4 = zext i8 %3 to i32
ret i32 %4
}
define i32 @test4() #0 {
%x = alloca i16, align 2
%y = alloca i16, align 2
; CHECK: ldr r0, [sp]
%1 = load i16, i16* %x, align 2
; CHECK: ldr r1, [sp, #4]
%2 = load i16, i16* %y, align 2
%3 = add nsw i16 %1, %2
%4 = zext i16 %3 to i32
ret i32 %4
}
; Don't widen if the value needs to be zero-extended
define zeroext i8 @test5() {
%x = alloca i8, align 1
; CHECK: mov r0, sp
; CHECK: ldrb r0, [r0]
%1 = load i8, i8* %x, align 1
ret i8 %1
}
define zeroext i16 @test6() {
%x = alloca i16, align 2
; CHECK: mov r0, sp
; CHECK: ldrh r0, [r0]
%1 = load i16, i16* %x, align 2
ret i16 %1
}
; Accessing the bottom of a large array shouldn't require materializing a base
define void @test7() {
%arr = alloca [200 x i32], align 4
; CHECK: movs [[REG:r[0-9]+]], #1
; CHECK: str [[REG]], [sp, #4]
%arrayidx = getelementptr inbounds [200 x i32], [200 x i32]* %arr, i32 0, i32 1
store i32 1, i32* %arrayidx, align 4
; CHECK: str [[REG]], [sp, #16]
%arrayidx1 = getelementptr inbounds [200 x i32], [200 x i32]* %arr, i32 0, i32 4
store i32 1, i32* %arrayidx1, align 4
ret void
}
; Check that loads/stores with out-of-range offsets are handled correctly
define void @test8() {
%arr3 = alloca [224 x i32], align 4
%arr2 = alloca [224 x i32], align 4
%arr1 = alloca [224 x i32], align 4
; CHECK: movs [[REG:r[0-9]+]], #1
; CHECK: str [[REG]], [sp]
%arr1idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr1, i32 0, i32 0
store i32 1, i32* %arr1idx1, align 4
; Offset in range for sp-based store, but not for non-sp-based store
; CHECK: str [[REG]], [sp, #128]
%arr1idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr1, i32 0, i32 32
store i32 1, i32* %arr1idx2, align 4
; CHECK: str [[REG]], [sp, #896]
%arr2idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr2, i32 0, i32 0
store i32 1, i32* %arr2idx1, align 4
; %arr2 is in range, but this element of it is not
; CHECK: str [[REG]], [{{r[0-9]+}}]
%arr2idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr2, i32 0, i32 32
store i32 1, i32* %arr2idx2, align 4
; %arr3 is not in range
; CHECK: str [[REG]], [{{r[0-9]+}}]
%arr3idx1 = getelementptr inbounds [224 x i32], [224 x i32]* %arr3, i32 0, i32 0
store i32 1, i32* %arr3idx1, align 4
; CHECK: str [[REG]], [{{r[0-9]+}}]
%arr3idx2 = getelementptr inbounds [224 x i32], [224 x i32]* %arr3, i32 0, i32 32
store i32 1, i32* %arr3idx2, align 4
ret void
}