llvm-6502/test/CodeGen/X86/sse3-avx-addsub.ll
Andrea Di Biagio bf0fb36d72 Revert r211771. It was: "[X86] Improve the selection of SSE3/AVX addsub instructions".
This chang fully reverts r211771.
That revision added a canonicalization rule which has the potential to causes a
combine-cycle in the target-independent canonicalizing DAG combine.

The plan is to move the logic that forms target specific addsub nodes as part of
the lowering of shuffles.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213736 91177308-0d34-0410-b5e6-96231b3b80d8
2014-07-23 11:20:24 +00:00

144 lines
4.0 KiB
LLVM

; RUN: llc < %s -march=x86-64 -mcpu=corei7 | FileCheck %s -check-prefix=SSE -check-prefix=CHECK
; RUN: llc < %s -march=x86-64 -mcpu=corei7-avx | FileCheck %s -check-prefix=AVX -check-prefix=CHECK
; Test ADDSUB ISel patterns.
; Functions below are obtained from the following source:
;
; typedef double double2 __attribute__((ext_vector_type(2)));
; typedef double double4 __attribute__((ext_vector_type(4)));
; typedef float float4 __attribute__((ext_vector_type(4)));
; typedef float float8 __attribute__((ext_vector_type(8)));
;
; float4 test1(float4 A, float4 B) {
; float4 X = A - B;
; float4 Y = A + B;
; return (float4){X[0], Y[1], X[2], Y[3]};
; }
;
; float8 test2(float8 A, float8 B) {
; float8 X = A - B;
; float8 Y = A + B;
; return (float8){X[0], Y[1], X[2], Y[3], X[4], Y[5], X[6], Y[7]};
; }
;
; double4 test3(double4 A, double4 B) {
; double4 X = A - B;
; double4 Y = A + B;
; return (double4){X[0], Y[1], X[2], Y[3]};
; }
;
; double2 test4(double2 A, double2 B) {
; double2 X = A - B;
; double2 Y = A + B;
; return (double2){X[0], Y[1]};
; }
define <4 x float> @test1(<4 x float> %A, <4 x float> %B) {
%sub = fsub <4 x float> %A, %B
%add = fadd <4 x float> %A, %B
%vecinit6 = shufflevector <4 x float> %sub, <4 x float> %add, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
ret <4 x float> %vecinit6
}
; CHECK-LABEL: test1
; SSE: addsubps
; AVX: vaddsubps
; CHECK-NEXT: ret
define <8 x float> @test2(<8 x float> %A, <8 x float> %B) {
%sub = fsub <8 x float> %A, %B
%add = fadd <8 x float> %A, %B
%vecinit14 = shufflevector <8 x float> %sub, <8 x float> %add, <8 x i32> <i32 0, i32 9, i32 2, i32 11, i32 4, i32 13, i32 6, i32 15>
ret <8 x float> %vecinit14
}
; CHECK-LABEL: test2
; SSE: addsubps
; SSE-NEXT: addsubps
; AVX: vaddsubps
; AVX-NOT: vaddsubps
; CHECK: ret
define <4 x double> @test3(<4 x double> %A, <4 x double> %B) {
%sub = fsub <4 x double> %A, %B
%add = fadd <4 x double> %A, %B
%vecinit6 = shufflevector <4 x double> %sub, <4 x double> %add, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
ret <4 x double> %vecinit6
}
; CHECK-LABEL: test3
; SSE: addsubpd
; SSE: addsubpd
; AVX: vaddsubpd
; AVX-NOT: vaddsubpd
; CHECK: ret
define <2 x double> @test4(<2 x double> %A, <2 x double> %B) #0 {
%add = fadd <2 x double> %A, %B
%sub = fsub <2 x double> %A, %B
%vecinit2 = shufflevector <2 x double> %sub, <2 x double> %add, <2 x i32> <i32 0, i32 3>
ret <2 x double> %vecinit2
}
; CHECK-LABEL: test4
; SSE: addsubpd
; AVX: vaddsubpd
; CHECK-NEXT: ret
define <4 x float> @test1b(<4 x float> %A, <4 x float>* %B) {
%1 = load <4 x float>* %B
%add = fadd <4 x float> %A, %1
%sub = fsub <4 x float> %A, %1
%vecinit6 = shufflevector <4 x float> %sub, <4 x float> %add, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
ret <4 x float> %vecinit6
}
; CHECK-LABEL: test1b
; SSE: addsubps
; AVX: vaddsubps
; CHECK-NEXT: ret
define <8 x float> @test2b(<8 x float> %A, <8 x float>* %B) {
%1 = load <8 x float>* %B
%add = fadd <8 x float> %A, %1
%sub = fsub <8 x float> %A, %1
%vecinit14 = shufflevector <8 x float> %sub, <8 x float> %add, <8 x i32> <i32 0, i32 9, i32 2, i32 11, i32 4, i32 13, i32 6, i32 15>
ret <8 x float> %vecinit14
}
; CHECK-LABEL: test2b
; SSE: addsubps
; SSE-NEXT: addsubps
; AVX: vaddsubps
; AVX-NOT: vaddsubps
; CHECK: ret
define <4 x double> @test3b(<4 x double> %A, <4 x double>* %B) {
%1 = load <4 x double>* %B
%add = fadd <4 x double> %A, %1
%sub = fsub <4 x double> %A, %1
%vecinit6 = shufflevector <4 x double> %sub, <4 x double> %add, <4 x i32> <i32 0, i32 5, i32 2, i32 7>
ret <4 x double> %vecinit6
}
; CHECK-LABEL: test3b
; SSE: addsubpd
; SSE: addsubpd
; AVX: vaddsubpd
; AVX-NOT: vaddsubpd
; CHECK: ret
define <2 x double> @test4b(<2 x double> %A, <2 x double>* %B) {
%1 = load <2 x double>* %B
%sub = fsub <2 x double> %A, %1
%add = fadd <2 x double> %A, %1
%vecinit2 = shufflevector <2 x double> %sub, <2 x double> %add, <2 x i32> <i32 0, i32 3>
ret <2 x double> %vecinit2
}
; CHECK-LABEL: test4b
; SSE: addsubpd
; AVX: vaddsubpd
; CHECK-NEXT: ret