llvm-6502/lib/Target/Mips/Mips.td
Matheus Almeida c308f165a0 [mips] Add initial support for NaN2008 in the back-end.
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).

Differential Revision: http://reviews.llvm.org/D3346


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
2014-04-16 15:48:55 +00:00

127 lines
6.1 KiB
TableGen

//===-- Mips.td - Describe the Mips Target Machine ---------*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
// This is the top level entry point for the Mips target.
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Target-independent interfaces
//===----------------------------------------------------------------------===//
include "llvm/Target/Target.td"
//===----------------------------------------------------------------------===//
// Register File, Calling Conv, Instruction Descriptions
//===----------------------------------------------------------------------===//
include "MipsRegisterInfo.td"
include "MipsSchedule.td"
include "MipsInstrInfo.td"
include "MipsCallingConv.td"
def MipsInstrInfo : InstrInfo;
//===----------------------------------------------------------------------===//
// Mips Subtarget features //
//===----------------------------------------------------------------------===//
def FeatureGP64Bit : SubtargetFeature<"gp64", "IsGP64bit", "true",
"General Purpose Registers are 64-bit wide.">;
def FeatureFP64Bit : SubtargetFeature<"fp64", "IsFP64bit", "true",
"Support 64-bit FP registers.">;
def FeatureNaN2008 : SubtargetFeature<"nan2008", "IsNaN2008bit", "true",
"IEEE 754-2008 NaN encoding.">;
def FeatureSingleFloat : SubtargetFeature<"single-float", "IsSingleFloat",
"true", "Only supports single precision float">;
def FeatureO32 : SubtargetFeature<"o32", "MipsABI", "O32",
"Enable o32 ABI">;
def FeatureN32 : SubtargetFeature<"n32", "MipsABI", "N32",
"Enable n32 ABI">;
def FeatureN64 : SubtargetFeature<"n64", "MipsABI", "N64",
"Enable n64 ABI">;
def FeatureEABI : SubtargetFeature<"eabi", "MipsABI", "EABI",
"Enable eabi ABI">;
def FeatureVFPU : SubtargetFeature<"vfpu", "HasVFPU",
"true", "Enable vector FPU instructions.">;
def FeatureSEInReg : SubtargetFeature<"seinreg", "HasSEInReg", "true",
"Enable 'signext in register' instructions.">;
def FeatureCondMov : SubtargetFeature<"condmov", "HasCondMov", "true",
"Enable 'conditional move' instructions.">;
def FeatureSwap : SubtargetFeature<"swap", "HasSwap", "true",
"Enable 'byte/half swap' instructions.">;
def FeatureBitCount : SubtargetFeature<"bitcount", "HasBitCount", "true",
"Enable 'count leading bits' instructions.">;
def FeatureFPIdx : SubtargetFeature<"fpidx", "HasFPIdx", "true",
"Enable 'FP indexed load/store' instructions.">;
def FeatureMips32 : SubtargetFeature<"mips32", "MipsArchVersion", "Mips32",
"Mips32 ISA Support",
[FeatureCondMov, FeatureBitCount]>;
def FeatureMips32r2 : SubtargetFeature<"mips32r2", "MipsArchVersion",
"Mips32r2", "Mips32r2 ISA Support",
[FeatureMips32, FeatureSEInReg, FeatureSwap,
FeatureFPIdx]>;
def FeatureMips4 : SubtargetFeature<"mips4", "MipsArchVersion",
"Mips4", "MIPS IV ISA Support",
[FeatureGP64Bit, FeatureFP64Bit, FeatureFPIdx,
FeatureCondMov]>;
def FeatureMips64 : SubtargetFeature<"mips64", "MipsArchVersion",
"Mips64", "Mips64 ISA Support",
[FeatureMips4, FeatureMips32, FeatureFPIdx]>;
def FeatureMips64r2 : SubtargetFeature<"mips64r2", "MipsArchVersion",
"Mips64r2", "Mips64r2 ISA Support",
[FeatureMips64, FeatureMips32r2]>;
def FeatureMips16 : SubtargetFeature<"mips16", "InMips16Mode", "true",
"Mips16 mode">;
def FeatureDSP : SubtargetFeature<"dsp", "HasDSP", "true", "Mips DSP ASE">;
def FeatureDSPR2 : SubtargetFeature<"dspr2", "HasDSPR2", "true",
"Mips DSP-R2 ASE", [FeatureDSP]>;
def FeatureMSA : SubtargetFeature<"msa", "HasMSA", "true", "Mips MSA ASE">;
def FeatureMicroMips : SubtargetFeature<"micromips", "InMicroMipsMode", "true",
"microMips mode">;
def FeatureCnMips : SubtargetFeature<"cnmips", "HasCnMips",
"true", "Octeon cnMIPS Support",
[FeatureMips64r2]>;
//===----------------------------------------------------------------------===//
// Mips processors supported.
//===----------------------------------------------------------------------===//
class Proc<string Name, list<SubtargetFeature> Features>
: Processor<Name, MipsGenericItineraries, Features>;
def : Proc<"mips32", [FeatureMips32, FeatureO32]>;
def : Proc<"mips32r2", [FeatureMips32r2, FeatureO32]>;
def : Proc<"mips4", [FeatureMips4, FeatureN64]>;
def : Proc<"mips64", [FeatureMips64, FeatureN64]>;
def : Proc<"mips64r2", [FeatureMips64r2, FeatureN64]>;
def : Proc<"mips16", [FeatureMips16, FeatureO32]>;
def : Proc<"octeon", [FeatureMips64r2, FeatureN64, FeatureCnMips]>;
def MipsAsmParser : AsmParser {
let ShouldEmitMatchRegisterName = 0;
let MnemonicContainsDot = 1;
}
def MipsAsmParserVariant : AsmParserVariant {
int Variant = 0;
// Recognize hard coded registers.
string RegisterPrefix = "$";
}
def Mips : Target {
let InstructionSet = MipsInstrInfo;
let AssemblyParsers = [MipsAsmParser];
let AssemblyParserVariants = [MipsAsmParserVariant];
}