llvm-6502/lib/Target/X86/X86ISelSimple.cpp
2005-01-09 01:49:29 +00:00

4120 lines
157 KiB
C++

//===-- X86ISelSimple.cpp - A simple instruction selector for x86 ---------===//
//
// The LLVM Compiler Infrastructure
//
// This file was developed by the LLVM research group and is distributed under
// the University of Illinois Open Source License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines a simple peephole instruction selector for the x86 target
//
//===----------------------------------------------------------------------===//
#include "X86.h"
#include "X86InstrBuilder.h"
#include "X86InstrInfo.h"
#include "llvm/Constants.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Function.h"
#include "llvm/Instructions.h"
#include "llvm/Pass.h"
#include "llvm/CodeGen/IntrinsicLowering.h"
#include "llvm/CodeGen/MachineConstantPool.h"
#include "llvm/CodeGen/MachineFrameInfo.h"
#include "llvm/CodeGen/MachineFunction.h"
#include "llvm/CodeGen/SSARegMap.h"
#include "llvm/Target/MRegisterInfo.h"
#include "llvm/Target/TargetMachine.h"
#include "llvm/Support/GetElementPtrTypeIterator.h"
#include "llvm/Support/InstVisitor.h"
#include "llvm/ADT/Statistic.h"
using namespace llvm;
namespace {
Statistic<>
NumFPKill("x86-codegen", "Number of FP_REG_KILL instructions added");
/// TypeClass - Used by the X86 backend to group LLVM types by their basic X86
/// Representation.
///
enum TypeClass {
cByte, cShort, cInt, cFP, cLong
};
}
/// getClass - Turn a primitive type into a "class" number which is based on the
/// size of the type, and whether or not it is floating point.
///
static inline TypeClass getClass(const Type *Ty) {
switch (Ty->getTypeID()) {
case Type::SByteTyID:
case Type::UByteTyID: return cByte; // Byte operands are class #0
case Type::ShortTyID:
case Type::UShortTyID: return cShort; // Short operands are class #1
case Type::IntTyID:
case Type::UIntTyID:
case Type::PointerTyID: return cInt; // Int's and pointers are class #2
case Type::FloatTyID:
case Type::DoubleTyID: return cFP; // Floating Point is #3
case Type::LongTyID:
case Type::ULongTyID: return cLong; // Longs are class #4
default:
assert(0 && "Invalid type to getClass!");
return cByte; // not reached
}
}
// getClassB - Just like getClass, but treat boolean values as bytes.
static inline TypeClass getClassB(const Type *Ty) {
if (Ty == Type::BoolTy) return cByte;
return getClass(Ty);
}
namespace {
struct X86ISel : public FunctionPass, InstVisitor<X86ISel> {
TargetMachine &TM;
MachineFunction *F; // The function we are compiling into
MachineBasicBlock *BB; // The current MBB we are compiling
int VarArgsFrameIndex; // FrameIndex for start of varargs area
int ReturnAddressIndex; // FrameIndex for the return address
std::map<Value*, unsigned> RegMap; // Mapping between Val's and SSA Regs
// MBBMap - Mapping between LLVM BB -> Machine BB
std::map<const BasicBlock*, MachineBasicBlock*> MBBMap;
// AllocaMap - Mapping from fixed sized alloca instructions to the
// FrameIndex for the alloca.
std::map<AllocaInst*, unsigned> AllocaMap;
X86ISel(TargetMachine &tm) : TM(tm), F(0), BB(0) {}
/// runOnFunction - Top level implementation of instruction selection for
/// the entire function.
///
bool runOnFunction(Function &Fn) {
// Lazily create a stack slot for the return address if needed.
ReturnAddressIndex = 0;
// First pass over the function, lower any unknown intrinsic functions
// with the IntrinsicLowering class.
LowerUnknownIntrinsicFunctionCalls(Fn);
F = &MachineFunction::construct(&Fn, TM);
// Create all of the machine basic blocks for the function...
for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
F->getBasicBlockList().push_back(MBBMap[I] = new MachineBasicBlock(I));
BB = &F->front();
// Copy incoming arguments off of the stack...
LoadArgumentsToVirtualRegs(Fn);
// If this is main, emit special code.
if (Fn.hasExternalLinkage() && Fn.getName() == "main")
EmitSpecialCodeForMain();
// Instruction select everything except PHI nodes
visit(Fn);
// Select the PHI nodes
SelectPHINodes();
// Insert the FP_REG_KILL instructions into blocks that need them.
InsertFPRegKills();
RegMap.clear();
MBBMap.clear();
AllocaMap.clear();
F = 0;
// We always build a machine code representation for the function
return true;
}
virtual const char *getPassName() const {
return "X86 Simple Instruction Selection";
}
/// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
/// the main function.
void EmitSpecialCodeForMain();
/// visitBasicBlock - This method is called when we are visiting a new basic
/// block. This simply creates a new MachineBasicBlock to emit code into
/// and adds it to the current MachineFunction. Subsequent visit* for
/// instructions will be invoked for all instructions in the basic block.
///
void visitBasicBlock(BasicBlock &LLVM_BB) {
BB = MBBMap[&LLVM_BB];
}
/// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
/// function, lowering any calls to unknown intrinsic functions into the
/// equivalent LLVM code.
///
void LowerUnknownIntrinsicFunctionCalls(Function &F);
/// LoadArgumentsToVirtualRegs - Load all of the arguments to this function
/// from the stack into virtual registers.
///
void LoadArgumentsToVirtualRegs(Function &F);
/// SelectPHINodes - Insert machine code to generate phis. This is tricky
/// because we have to generate our sources into the source basic blocks,
/// not the current one.
///
void SelectPHINodes();
/// InsertFPRegKills - Insert FP_REG_KILL instructions into basic blocks
/// that need them. This only occurs due to the floating point stackifier
/// not being aggressive enough to handle arbitrary global stackification.
///
void InsertFPRegKills();
// Visitation methods for various instructions. These methods simply emit
// fixed X86 code for each instruction.
//
// Control flow operators
void visitReturnInst(ReturnInst &RI);
void visitBranchInst(BranchInst &BI);
void visitUnreachableInst(UnreachableInst &UI) {}
struct ValueRecord {
Value *Val;
unsigned Reg;
const Type *Ty;
ValueRecord(unsigned R, const Type *T) : Val(0), Reg(R), Ty(T) {}
ValueRecord(Value *V) : Val(V), Reg(0), Ty(V->getType()) {}
};
void doCall(const ValueRecord &Ret, MachineInstr *CallMI,
const std::vector<ValueRecord> &Args);
void visitCallInst(CallInst &I);
void visitIntrinsicCall(Intrinsic::ID ID, CallInst &I);
// Arithmetic operators
void visitSimpleBinary(BinaryOperator &B, unsigned OpcodeClass);
void visitAdd(BinaryOperator &B) { visitSimpleBinary(B, 0); }
void visitSub(BinaryOperator &B) { visitSimpleBinary(B, 1); }
void visitMul(BinaryOperator &B);
void visitDiv(BinaryOperator &B) { visitDivRem(B); }
void visitRem(BinaryOperator &B) { visitDivRem(B); }
void visitDivRem(BinaryOperator &B);
// Bitwise operators
void visitAnd(BinaryOperator &B) { visitSimpleBinary(B, 2); }
void visitOr (BinaryOperator &B) { visitSimpleBinary(B, 3); }
void visitXor(BinaryOperator &B) { visitSimpleBinary(B, 4); }
// Comparison operators...
void visitSetCondInst(SetCondInst &I);
unsigned EmitComparison(unsigned OpNum, Value *Op0, Value *Op1,
MachineBasicBlock *MBB,
MachineBasicBlock::iterator MBBI);
void visitSelectInst(SelectInst &SI);
// Memory Instructions
void visitLoadInst(LoadInst &I);
void visitStoreInst(StoreInst &I);
void visitGetElementPtrInst(GetElementPtrInst &I);
void visitAllocaInst(AllocaInst &I);
void visitMallocInst(MallocInst &I);
void visitFreeInst(FreeInst &I);
// Other operators
void visitShiftInst(ShiftInst &I);
void visitPHINode(PHINode &I) {} // PHI nodes handled by second pass
void visitCastInst(CastInst &I);
void visitVANextInst(VANextInst &I);
void visitVAArgInst(VAArgInst &I);
void visitInstruction(Instruction &I) {
std::cerr << "Cannot instruction select: " << I;
abort();
}
/// promote32 - Make a value 32-bits wide, and put it somewhere.
///
void promote32(unsigned targetReg, const ValueRecord &VR);
/// getAddressingMode - Get the addressing mode to use to address the
/// specified value. The returned value should be used with addFullAddress.
void getAddressingMode(Value *Addr, X86AddressMode &AM);
/// getGEPIndex - This is used to fold GEP instructions into X86 addressing
/// expressions.
void getGEPIndex(MachineBasicBlock *MBB, MachineBasicBlock::iterator IP,
std::vector<Value*> &GEPOps,
std::vector<const Type*> &GEPTypes,
X86AddressMode &AM);
/// isGEPFoldable - Return true if the specified GEP can be completely
/// folded into the addressing mode of a load/store or lea instruction.
bool isGEPFoldable(MachineBasicBlock *MBB,
Value *Src, User::op_iterator IdxBegin,
User::op_iterator IdxEnd, X86AddressMode &AM);
/// emitGEPOperation - Common code shared between visitGetElementPtrInst and
/// constant expression GEP support.
///
void emitGEPOperation(MachineBasicBlock *BB, MachineBasicBlock::iterator IP,
Value *Src, User::op_iterator IdxBegin,
User::op_iterator IdxEnd, unsigned TargetReg);
/// emitCastOperation - Common code shared between visitCastInst and
/// constant expression cast support.
///
void emitCastOperation(MachineBasicBlock *BB,MachineBasicBlock::iterator IP,
Value *Src, const Type *DestTy, unsigned TargetReg);
/// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
/// and constant expression support.
///
void emitSimpleBinaryOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1,
unsigned OperatorClass, unsigned TargetReg);
/// emitBinaryFPOperation - This method handles emission of floating point
/// Add (0), Sub (1), Mul (2), and Div (3) operations.
void emitBinaryFPOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1,
unsigned OperatorClass, unsigned TargetReg);
void emitMultiply(MachineBasicBlock *BB, MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, unsigned TargetReg);
void doMultiply(MachineBasicBlock *MBB, MachineBasicBlock::iterator MBBI,
unsigned DestReg, const Type *DestTy,
unsigned Op0Reg, unsigned Op1Reg);
void doMultiplyConst(MachineBasicBlock *MBB,
MachineBasicBlock::iterator MBBI,
unsigned DestReg, const Type *DestTy,
unsigned Op0Reg, unsigned Op1Val);
void emitDivRemOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, bool isDiv,
unsigned TargetReg);
/// emitSetCCOperation - Common code shared between visitSetCondInst and
/// constant expression support.
///
void emitSetCCOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, unsigned Opcode,
unsigned TargetReg);
/// emitShiftOperation - Common code shared between visitShiftInst and
/// constant expression support.
///
void emitShiftOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Op, Value *ShiftAmount, bool isLeftShift,
const Type *ResultTy, unsigned DestReg);
// Emit code for a 'SHLD DestReg, Op0, Op1, Amt' operation, where Amt is a
// constant.
void doSHLDConst(MachineBasicBlock *MBB,
MachineBasicBlock::iterator MBBI,
unsigned DestReg, unsigned Op0Reg, unsigned Op1Reg,
unsigned Op1Val);
/// emitSelectOperation - Common code shared between visitSelectInst and the
/// constant expression support.
void emitSelectOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Cond, Value *TrueVal, Value *FalseVal,
unsigned DestReg);
/// copyConstantToRegister - Output the instructions required to put the
/// specified constant into the specified register.
///
void copyConstantToRegister(MachineBasicBlock *MBB,
MachineBasicBlock::iterator MBBI,
Constant *C, unsigned Reg);
void emitUCOMr(MachineBasicBlock *MBB, MachineBasicBlock::iterator MBBI,
unsigned LHS, unsigned RHS);
/// makeAnotherReg - This method returns the next register number we haven't
/// yet used.
///
/// Long values are handled somewhat specially. They are always allocated
/// as pairs of 32 bit integer values. The register number returned is the
/// lower 32 bits of the long value, and the regNum+1 is the upper 32 bits
/// of the long value.
///
unsigned makeAnotherReg(const Type *Ty) {
assert(dynamic_cast<const X86RegisterInfo*>(TM.getRegisterInfo()) &&
"Current target doesn't have X86 reg info??");
const X86RegisterInfo *MRI =
static_cast<const X86RegisterInfo*>(TM.getRegisterInfo());
if (Ty == Type::LongTy || Ty == Type::ULongTy) {
const TargetRegisterClass *RC = MRI->getRegClassForType(Type::IntTy);
// Create the lower part
F->getSSARegMap()->createVirtualRegister(RC);
// Create the upper part.
return F->getSSARegMap()->createVirtualRegister(RC)-1;
}
// Add the mapping of regnumber => reg class to MachineFunction
const TargetRegisterClass *RC = MRI->getRegClassForType(Ty);
return F->getSSARegMap()->createVirtualRegister(RC);
}
/// getReg - This method turns an LLVM value into a register number.
///
unsigned getReg(Value &V) { return getReg(&V); } // Allow references
unsigned getReg(Value *V) {
// Just append to the end of the current bb.
MachineBasicBlock::iterator It = BB->end();
return getReg(V, BB, It);
}
unsigned getReg(Value *V, MachineBasicBlock *MBB,
MachineBasicBlock::iterator IPt);
/// getFixedSizedAllocaFI - Return the frame index for a fixed sized alloca
/// that is to be statically allocated with the initial stack frame
/// adjustment.
unsigned getFixedSizedAllocaFI(AllocaInst *AI);
};
}
/// dyn_castFixedAlloca - If the specified value is a fixed size alloca
/// instruction in the entry block, return it. Otherwise, return a null
/// pointer.
static AllocaInst *dyn_castFixedAlloca(Value *V) {
if (AllocaInst *AI = dyn_cast<AllocaInst>(V)) {
BasicBlock *BB = AI->getParent();
if (isa<ConstantUInt>(AI->getArraySize()) && BB ==&BB->getParent()->front())
return AI;
}
return 0;
}
/// getReg - This method turns an LLVM value into a register number.
///
unsigned X86ISel::getReg(Value *V, MachineBasicBlock *MBB,
MachineBasicBlock::iterator IPt) {
// If this operand is a constant, emit the code to copy the constant into
// the register here...
if (Constant *C = dyn_cast<Constant>(V)) {
unsigned Reg = makeAnotherReg(V->getType());
copyConstantToRegister(MBB, IPt, C, Reg);
return Reg;
} else if (CastInst *CI = dyn_cast<CastInst>(V)) {
// Do not emit noop casts at all, unless it's a double -> float cast.
if (getClassB(CI->getType()) == getClassB(CI->getOperand(0)->getType()) &&
(CI->getType() != Type::FloatTy ||
CI->getOperand(0)->getType() != Type::DoubleTy))
return getReg(CI->getOperand(0), MBB, IPt);
} else if (AllocaInst *AI = dyn_castFixedAlloca(V)) {
// If the alloca address couldn't be folded into the instruction addressing,
// emit an explicit LEA as appropriate.
unsigned Reg = makeAnotherReg(V->getType());
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(*MBB, IPt, X86::LEA32r, 4, Reg), FI);
return Reg;
}
unsigned &Reg = RegMap[V];
if (Reg == 0) {
Reg = makeAnotherReg(V->getType());
RegMap[V] = Reg;
}
return Reg;
}
/// getFixedSizedAllocaFI - Return the frame index for a fixed sized alloca
/// that is to be statically allocated with the initial stack frame
/// adjustment.
unsigned X86ISel::getFixedSizedAllocaFI(AllocaInst *AI) {
// Already computed this?
std::map<AllocaInst*, unsigned>::iterator I = AllocaMap.lower_bound(AI);
if (I != AllocaMap.end() && I->first == AI) return I->second;
const Type *Ty = AI->getAllocatedType();
ConstantUInt *CUI = cast<ConstantUInt>(AI->getArraySize());
unsigned TySize = TM.getTargetData().getTypeSize(Ty);
TySize *= CUI->getValue(); // Get total allocated size...
unsigned Alignment = TM.getTargetData().getTypeAlignment(Ty);
// Create a new stack object using the frame manager...
int FrameIdx = F->getFrameInfo()->CreateStackObject(TySize, Alignment);
AllocaMap.insert(I, std::make_pair(AI, FrameIdx));
return FrameIdx;
}
/// copyConstantToRegister - Output the instructions required to put the
/// specified constant into the specified register.
///
void X86ISel::copyConstantToRegister(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Constant *C, unsigned R) {
if (isa<UndefValue>(C)) {
switch (getClassB(C->getType())) {
case cFP:
// FIXME: SHOULD TEACH STACKIFIER ABOUT UNDEF VALUES!
BuildMI(*MBB, IP, X86::FLD0, 0, R);
return;
case cLong:
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, R+1);
// FALL THROUGH
default:
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, R);
return;
}
} else if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C)) {
unsigned Class = 0;
switch (CE->getOpcode()) {
case Instruction::GetElementPtr:
emitGEPOperation(MBB, IP, CE->getOperand(0),
CE->op_begin()+1, CE->op_end(), R);
return;
case Instruction::Cast:
emitCastOperation(MBB, IP, CE->getOperand(0), CE->getType(), R);
return;
case Instruction::Xor: ++Class; // FALL THROUGH
case Instruction::Or: ++Class; // FALL THROUGH
case Instruction::And: ++Class; // FALL THROUGH
case Instruction::Sub: ++Class; // FALL THROUGH
case Instruction::Add:
emitSimpleBinaryOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
Class, R);
return;
case Instruction::Mul:
emitMultiply(MBB, IP, CE->getOperand(0), CE->getOperand(1), R);
return;
case Instruction::Div:
case Instruction::Rem:
emitDivRemOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
CE->getOpcode() == Instruction::Div, R);
return;
case Instruction::SetNE:
case Instruction::SetEQ:
case Instruction::SetLT:
case Instruction::SetGT:
case Instruction::SetLE:
case Instruction::SetGE:
emitSetCCOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
CE->getOpcode(), R);
return;
case Instruction::Shl:
case Instruction::Shr:
emitShiftOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
CE->getOpcode() == Instruction::Shl, CE->getType(), R);
return;
case Instruction::Select:
emitSelectOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
CE->getOperand(2), R);
return;
default:
std::cerr << "Offending expr: " << *C << "\n";
assert(0 && "Constant expression not yet handled!\n");
}
}
if (C->getType()->isIntegral()) {
unsigned Class = getClassB(C->getType());
if (Class == cLong) {
// Copy the value into the register pair.
uint64_t Val = cast<ConstantInt>(C)->getRawValue();
BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addImm(Val & 0xFFFFFFFF);
BuildMI(*MBB, IP, X86::MOV32ri, 1, R+1).addImm(Val >> 32);
return;
}
assert(Class <= cInt && "Type not handled yet!");
static const unsigned IntegralOpcodeTab[] = {
X86::MOV8ri, X86::MOV16ri, X86::MOV32ri
};
if (C->getType() == Type::BoolTy) {
BuildMI(*MBB, IP, X86::MOV8ri, 1, R).addImm(C == ConstantBool::True);
} else {
ConstantInt *CI = cast<ConstantInt>(C);
BuildMI(*MBB, IP, IntegralOpcodeTab[Class],1,R).addImm(CI->getRawValue());
}
} else if (ConstantFP *CFP = dyn_cast<ConstantFP>(C)) {
if (CFP->isExactlyValue(+0.0))
BuildMI(*MBB, IP, X86::FLD0, 0, R);
else if (CFP->isExactlyValue(+1.0))
BuildMI(*MBB, IP, X86::FLD1, 0, R);
else if (CFP->isExactlyValue(-0.0)) {
unsigned Tmp = makeAnotherReg(Type::DoubleTy);
BuildMI(*MBB, IP, X86::FLD0, 0, Tmp);
BuildMI(*MBB, IP, X86::FCHS, 1, R).addReg(Tmp);
} else if (CFP->isExactlyValue(-1.0)) {
unsigned Tmp = makeAnotherReg(Type::DoubleTy);
BuildMI(*MBB, IP, X86::FLD1, 0, Tmp);
BuildMI(*MBB, IP, X86::FCHS, 1, R).addReg(Tmp);
} else { // FIXME: PI, other native values
// FIXME: 2*PI -> LDPI + FADD
// Otherwise we need to spill the constant to memory.
MachineConstantPool *CP = F->getConstantPool();
const Type *Ty = CFP->getType();
// If a FP immediate is precise when represented as a float, we put it
// into the constant pool as a float, even if it's is statically typed as
// a double.
if (Ty == Type::DoubleTy)
if (CFP->isExactlyValue((float)CFP->getValue())) {
Ty = Type::FloatTy;
CFP = cast<ConstantFP>(ConstantExpr::getCast(CFP, Ty));
}
unsigned CPI = CP->getConstantPoolIndex(CFP);
assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
unsigned LoadOpcode = Ty == Type::FloatTy ? X86::FLD32m : X86::FLD64m;
addConstantPoolReference(BuildMI(*MBB, IP, LoadOpcode, 4, R), CPI);
}
} else if (isa<ConstantPointerNull>(C)) {
// Copy zero (null pointer) to the register.
BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addImm(0);
} else if (GlobalValue *GV = dyn_cast<GlobalValue>(C)) {
BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addGlobalAddress(GV);
} else {
std::cerr << "Offending constant: " << *C << "\n";
assert(0 && "Type not handled yet!");
}
}
/// LoadArgumentsToVirtualRegs - Load all of the arguments to this function from
/// the stack into virtual registers.
///
void X86ISel::LoadArgumentsToVirtualRegs(Function &Fn) {
// Emit instructions to load the arguments... On entry to a function on the
// X86, the stack frame looks like this:
//
// [ESP] -- return address
// [ESP + 4] -- first argument (leftmost lexically)
// [ESP + 8] -- second argument, if first argument is four bytes in size
// ...
//
unsigned ArgOffset = 0; // Frame mechanisms handle retaddr slot
MachineFrameInfo *MFI = F->getFrameInfo();
for (Function::aiterator I = Fn.abegin(), E = Fn.aend(); I != E; ++I) {
bool ArgLive = !I->use_empty();
unsigned Reg = ArgLive ? getReg(*I) : 0;
int FI; // Frame object index
switch (getClassB(I->getType())) {
case cByte:
if (ArgLive) {
FI = MFI->CreateFixedObject(1, ArgOffset);
addFrameReference(BuildMI(BB, X86::MOV8rm, 4, Reg), FI);
}
break;
case cShort:
if (ArgLive) {
FI = MFI->CreateFixedObject(2, ArgOffset);
addFrameReference(BuildMI(BB, X86::MOV16rm, 4, Reg), FI);
}
break;
case cInt:
if (ArgLive) {
FI = MFI->CreateFixedObject(4, ArgOffset);
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg), FI);
}
break;
case cLong:
if (ArgLive) {
FI = MFI->CreateFixedObject(8, ArgOffset);
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg), FI);
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg+1), FI, 4);
}
ArgOffset += 4; // longs require 4 additional bytes
break;
case cFP:
if (ArgLive) {
unsigned Opcode;
if (I->getType() == Type::FloatTy) {
Opcode = X86::FLD32m;
FI = MFI->CreateFixedObject(4, ArgOffset);
} else {
Opcode = X86::FLD64m;
FI = MFI->CreateFixedObject(8, ArgOffset);
}
addFrameReference(BuildMI(BB, Opcode, 4, Reg), FI);
}
if (I->getType() == Type::DoubleTy)
ArgOffset += 4; // doubles require 4 additional bytes
break;
default:
assert(0 && "Unhandled argument type!");
}
ArgOffset += 4; // Each argument takes at least 4 bytes on the stack...
}
// If the function takes variable number of arguments, add a frame offset for
// the start of the first vararg value... this is used to expand
// llvm.va_start.
if (Fn.getFunctionType()->isVarArg())
VarArgsFrameIndex = MFI->CreateFixedObject(1, ArgOffset);
}
/// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
/// the main function.
void X86ISel::EmitSpecialCodeForMain() {
// Switch the FPU to 64-bit precision mode for better compatibility and speed.
int CWFrameIdx = F->getFrameInfo()->CreateStackObject(2, 2);
addFrameReference(BuildMI(BB, X86::FNSTCW16m, 4), CWFrameIdx);
// Set the high part to be 64-bit precision.
addFrameReference(BuildMI(BB, X86::MOV8mi, 5),
CWFrameIdx, 1).addImm(2);
// Reload the modified control word now.
addFrameReference(BuildMI(BB, X86::FLDCW16m, 4), CWFrameIdx);
}
/// SelectPHINodes - Insert machine code to generate phis. This is tricky
/// because we have to generate our sources into the source basic blocks, not
/// the current one.
///
void X86ISel::SelectPHINodes() {
const TargetInstrInfo &TII = *TM.getInstrInfo();
const Function &LF = *F->getFunction(); // The LLVM function...
for (Function::const_iterator I = LF.begin(), E = LF.end(); I != E; ++I) {
const BasicBlock *BB = I;
MachineBasicBlock &MBB = *MBBMap[I];
// Loop over all of the PHI nodes in the LLVM basic block...
MachineBasicBlock::iterator PHIInsertPoint = MBB.begin();
for (BasicBlock::const_iterator I = BB->begin(); isa<PHINode>(I); ++I) {
PHINode *PN = const_cast<PHINode*>(dyn_cast<PHINode>(I));
// Create a new machine instr PHI node, and insert it.
unsigned PHIReg = getReg(*PN);
MachineInstr *PhiMI = BuildMI(MBB, PHIInsertPoint,
X86::PHI, PN->getNumOperands(), PHIReg);
MachineInstr *LongPhiMI = 0;
if (PN->getType() == Type::LongTy || PN->getType() == Type::ULongTy)
LongPhiMI = BuildMI(MBB, PHIInsertPoint,
X86::PHI, PN->getNumOperands(), PHIReg+1);
// PHIValues - Map of blocks to incoming virtual registers. We use this
// so that we only initialize one incoming value for a particular block,
// even if the block has multiple entries in the PHI node.
//
std::map<MachineBasicBlock*, unsigned> PHIValues;
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
MachineBasicBlock *PredMBB = MBBMap[PN->getIncomingBlock(i)];
unsigned ValReg;
std::map<MachineBasicBlock*, unsigned>::iterator EntryIt =
PHIValues.lower_bound(PredMBB);
if (EntryIt != PHIValues.end() && EntryIt->first == PredMBB) {
// We already inserted an initialization of the register for this
// predecessor. Recycle it.
ValReg = EntryIt->second;
} else {
// Get the incoming value into a virtual register.
//
Value *Val = PN->getIncomingValue(i);
// If this is a constant or GlobalValue, we may have to insert code
// into the basic block to compute it into a virtual register.
if ((isa<Constant>(Val) && !isa<ConstantExpr>(Val))) {
// Simple constants get emitted at the end of the basic block,
// before any terminator instructions. We "know" that the code to
// move a constant into a register will never clobber any flags.
ValReg = getReg(Val, PredMBB, PredMBB->getFirstTerminator());
} else {
// Because we don't want to clobber any values which might be in
// physical registers with the computation of this constant (which
// might be arbitrarily complex if it is a constant expression),
// just insert the computation at the top of the basic block.
MachineBasicBlock::iterator PI = PredMBB->begin();
// Skip over any PHI nodes though!
while (PI != PredMBB->end() && PI->getOpcode() == X86::PHI)
++PI;
ValReg = getReg(Val, PredMBB, PI);
}
// Remember that we inserted a value for this PHI for this predecessor
PHIValues.insert(EntryIt, std::make_pair(PredMBB, ValReg));
}
PhiMI->addRegOperand(ValReg);
PhiMI->addMachineBasicBlockOperand(PredMBB);
if (LongPhiMI) {
LongPhiMI->addRegOperand(ValReg+1);
LongPhiMI->addMachineBasicBlockOperand(PredMBB);
}
}
// Now that we emitted all of the incoming values for the PHI node, make
// sure to reposition the InsertPoint after the PHI that we just added.
// This is needed because we might have inserted a constant into this
// block, right after the PHI's which is before the old insert point!
PHIInsertPoint = LongPhiMI ? LongPhiMI : PhiMI;
++PHIInsertPoint;
}
}
}
/// RequiresFPRegKill - The floating point stackifier pass cannot insert
/// compensation code on critical edges. As such, it requires that we kill all
/// FP registers on the exit from any blocks that either ARE critical edges, or
/// branch to a block that has incoming critical edges.
///
/// Note that this kill instruction will eventually be eliminated when
/// restrictions in the stackifier are relaxed.
///
static bool RequiresFPRegKill(const MachineBasicBlock *MBB) {
#if 0
const BasicBlock *BB = MBB->getBasicBlock ();
for (succ_const_iterator SI = succ_begin(BB), E = succ_end(BB); SI!=E; ++SI) {
const BasicBlock *Succ = *SI;
pred_const_iterator PI = pred_begin(Succ), PE = pred_end(Succ);
++PI; // Block have at least one predecessory
if (PI != PE) { // If it has exactly one, this isn't crit edge
// If this block has more than one predecessor, check all of the
// predecessors to see if they have multiple successors. If so, then the
// block we are analyzing needs an FPRegKill.
for (PI = pred_begin(Succ); PI != PE; ++PI) {
const BasicBlock *Pred = *PI;
succ_const_iterator SI2 = succ_begin(Pred);
++SI2; // There must be at least one successor of this block.
if (SI2 != succ_end(Pred))
return true; // Yes, we must insert the kill on this edge.
}
}
}
// If we got this far, there is no need to insert the kill instruction.
return false;
#else
return true;
#endif
}
// InsertFPRegKills - Insert FP_REG_KILL instructions into basic blocks that
// need them. This only occurs due to the floating point stackifier not being
// aggressive enough to handle arbitrary global stackification.
//
// Currently we insert an FP_REG_KILL instruction into each block that uses or
// defines a floating point virtual register.
//
// When the global register allocators (like linear scan) finally update live
// variable analysis, we can keep floating point values in registers across
// portions of the CFG that do not involve critical edges. This will be a big
// win, but we are waiting on the global allocators before we can do this.
//
// With a bit of work, the floating point stackifier pass can be enhanced to
// break critical edges as needed (to make a place to put compensation code),
// but this will require some infrastructure improvements as well.
//
void X86ISel::InsertFPRegKills() {
SSARegMap &RegMap = *F->getSSARegMap();
for (MachineFunction::iterator BB = F->begin(), E = F->end(); BB != E; ++BB) {
for (MachineBasicBlock::iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
MachineOperand& MO = I->getOperand(i);
if (MO.isRegister() && MO.getReg()) {
unsigned Reg = MO.getReg();
if (MRegisterInfo::isVirtualRegister(Reg)) {
unsigned RegSize = RegMap.getRegClass(Reg)->getSize();
if (RegSize == 10 || RegSize == 8)
goto UsesFPReg;
}
}
}
// If we haven't found an FP register use or def in this basic block, check
// to see if any of our successors has an FP PHI node, which will cause a
// copy to be inserted into this block.
for (MachineBasicBlock::const_succ_iterator SI = BB->succ_begin(),
SE = BB->succ_end(); SI != SE; ++SI) {
MachineBasicBlock *SBB = *SI;
for (MachineBasicBlock::iterator I = SBB->begin();
I != SBB->end() && I->getOpcode() == X86::PHI; ++I) {
const TargetRegisterClass *RC =
RegMap.getRegClass(I->getOperand(0).getReg());
if (RC->getSize() == 10 || RC->getSize() == 8)
goto UsesFPReg;
}
}
continue;
UsesFPReg:
// Okay, this block uses an FP register. If the block has successors (ie,
// it's not an unwind/return), insert the FP_REG_KILL instruction.
if (BB->succ_size() && RequiresFPRegKill(BB)) {
BuildMI(*BB, BB->getFirstTerminator(), X86::FP_REG_KILL, 0);
++NumFPKill;
}
}
}
void X86ISel::getAddressingMode(Value *Addr, X86AddressMode &AM) {
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = 0; AM.Scale = 1; AM.IndexReg = 0; AM.Disp = 0;
if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Addr)) {
if (isGEPFoldable(BB, GEP->getOperand(0), GEP->op_begin()+1, GEP->op_end(),
AM))
return;
} else if (ConstantExpr *CE = dyn_cast<ConstantExpr>(Addr)) {
if (CE->getOpcode() == Instruction::GetElementPtr)
if (isGEPFoldable(BB, CE->getOperand(0), CE->op_begin()+1, CE->op_end(),
AM))
return;
} else if (AllocaInst *AI = dyn_castFixedAlloca(Addr)) {
AM.BaseType = X86AddressMode::FrameIndexBase;
AM.Base.FrameIndex = getFixedSizedAllocaFI(AI);
return;
} else if (GlobalValue *GV = dyn_cast<GlobalValue>(Addr)) {
AM.GV = GV;
return;
}
// If it's not foldable, reset addr mode.
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = getReg(Addr);
AM.Scale = 1; AM.IndexReg = 0; AM.Disp = 0;
}
// canFoldSetCCIntoBranchOrSelect - Return the setcc instruction if we can fold
// it into the conditional branch or select instruction which is the only user
// of the cc instruction. This is the case if the conditional branch is the
// only user of the setcc. We also don't handle long arguments below, so we
// reject them here as well.
//
static SetCondInst *canFoldSetCCIntoBranchOrSelect(Value *V) {
if (SetCondInst *SCI = dyn_cast<SetCondInst>(V))
if (SCI->hasOneUse()) {
Instruction *User = cast<Instruction>(SCI->use_back());
if ((isa<BranchInst>(User) || isa<SelectInst>(User)) &&
(getClassB(SCI->getOperand(0)->getType()) != cLong ||
SCI->getOpcode() == Instruction::SetEQ ||
SCI->getOpcode() == Instruction::SetNE) &&
(isa<BranchInst>(User) || User->getOperand(0) == V))
return SCI;
}
return 0;
}
// Return a fixed numbering for setcc instructions which does not depend on the
// order of the opcodes.
//
static unsigned getSetCCNumber(unsigned Opcode) {
switch(Opcode) {
default: assert(0 && "Unknown setcc instruction!");
case Instruction::SetEQ: return 0;
case Instruction::SetNE: return 1;
case Instruction::SetLT: return 2;
case Instruction::SetGE: return 3;
case Instruction::SetGT: return 4;
case Instruction::SetLE: return 5;
}
}
// LLVM -> X86 signed X86 unsigned
// ----- ---------- ------------
// seteq -> sete sete
// setne -> setne setne
// setlt -> setl setb
// setge -> setge setae
// setgt -> setg seta
// setle -> setle setbe
// ----
// sets // Used by comparison with 0 optimization
// setns
static const unsigned SetCCOpcodeTab[2][8] = {
{ X86::SETEr, X86::SETNEr, X86::SETBr, X86::SETAEr, X86::SETAr, X86::SETBEr,
0, 0 },
{ X86::SETEr, X86::SETNEr, X86::SETLr, X86::SETGEr, X86::SETGr, X86::SETLEr,
X86::SETSr, X86::SETNSr },
};
/// emitUCOMr - In the future when we support processors before the P6, this
/// wraps the logic for emitting an FUCOMr vs FUCOMIr.
void X86ISel::emitUCOMr(MachineBasicBlock *MBB, MachineBasicBlock::iterator IP,
unsigned LHS, unsigned RHS) {
if (0) { // for processors prior to the P6
BuildMI(*MBB, IP, X86::FUCOMr, 2).addReg(LHS).addReg(RHS);
BuildMI(*MBB, IP, X86::FNSTSW8r, 0);
BuildMI(*MBB, IP, X86::SAHF, 1);
} else {
BuildMI(*MBB, IP, X86::FUCOMIr, 2).addReg(LHS).addReg(RHS);
}
}
// EmitComparison - This function emits a comparison of the two operands,
// returning the extended setcc code to use.
unsigned X86ISel::EmitComparison(unsigned OpNum, Value *Op0, Value *Op1,
MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP) {
// The arguments are already supposed to be of the same type.
const Type *CompTy = Op0->getType();
unsigned Class = getClassB(CompTy);
// Special case handling of: cmp R, i
if (isa<ConstantPointerNull>(Op1)) {
unsigned Op0r = getReg(Op0, MBB, IP);
if (OpNum < 2) // seteq/setne -> test
BuildMI(*MBB, IP, X86::TEST32rr, 2).addReg(Op0r).addReg(Op0r);
else
BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r).addImm(0);
return OpNum;
} else if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
if (Class == cByte || Class == cShort || Class == cInt) {
unsigned Op1v = CI->getRawValue();
// Mask off any upper bits of the constant, if there are any...
Op1v &= (1ULL << (8 << Class)) - 1;
// If this is a comparison against zero, emit more efficient code. We
// can't handle unsigned comparisons against zero unless they are == or
// !=. These should have been strength reduced already anyway.
if (Op1v == 0 && (CompTy->isSigned() || OpNum < 2)) {
// If this is a comparison against zero and the LHS is an and of a
// register with a constant, use the test to do the and.
if (Instruction *Op0I = dyn_cast<Instruction>(Op0))
if (Op0I->getOpcode() == Instruction::And && Op0->hasOneUse() &&
isa<ConstantInt>(Op0I->getOperand(1))) {
static const unsigned TESTTab[] = {
X86::TEST8ri, X86::TEST16ri, X86::TEST32ri
};
// Emit test X, i
unsigned LHS = getReg(Op0I->getOperand(0), MBB, IP);
unsigned Imm =
cast<ConstantInt>(Op0I->getOperand(1))->getRawValue();
BuildMI(*MBB, IP, TESTTab[Class], 2).addReg(LHS).addImm(Imm);
if (OpNum == 2) return 6; // Map jl -> js
if (OpNum == 3) return 7; // Map jg -> jns
return OpNum;
}
unsigned Op0r = getReg(Op0, MBB, IP);
static const unsigned TESTTab[] = {
X86::TEST8rr, X86::TEST16rr, X86::TEST32rr
};
BuildMI(*MBB, IP, TESTTab[Class], 2).addReg(Op0r).addReg(Op0r);
if (OpNum == 2) return 6; // Map jl -> js
if (OpNum == 3) return 7; // Map jg -> jns
return OpNum;
}
static const unsigned CMPTab[] = {
X86::CMP8ri, X86::CMP16ri, X86::CMP32ri
};
unsigned Op0r = getReg(Op0, MBB, IP);
BuildMI(*MBB, IP, CMPTab[Class], 2).addReg(Op0r).addImm(Op1v);
return OpNum;
} else {
unsigned Op0r = getReg(Op0, MBB, IP);
assert(Class == cLong && "Unknown integer class!");
unsigned LowCst = CI->getRawValue();
unsigned HiCst = CI->getRawValue() >> 32;
if (OpNum < 2) { // seteq, setne
unsigned LoTmp = Op0r;
if (LowCst != 0) {
LoTmp = makeAnotherReg(Type::IntTy);
BuildMI(*MBB, IP, X86::XOR32ri, 2, LoTmp).addReg(Op0r).addImm(LowCst);
}
unsigned HiTmp = Op0r+1;
if (HiCst != 0) {
HiTmp = makeAnotherReg(Type::IntTy);
BuildMI(*MBB, IP, X86::XOR32ri, 2,HiTmp).addReg(Op0r+1).addImm(HiCst);
}
unsigned FinalTmp = makeAnotherReg(Type::IntTy);
BuildMI(*MBB, IP, X86::OR32rr, 2, FinalTmp).addReg(LoTmp).addReg(HiTmp);
return OpNum;
} else {
// Emit a sequence of code which compares the high and low parts once
// each, then uses a conditional move to handle the overflow case. For
// example, a setlt for long would generate code like this:
//
// AL = lo(op1) < lo(op2) // Always unsigned comparison
// BL = hi(op1) < hi(op2) // Signedness depends on operands
// dest = hi(op1) == hi(op2) ? BL : AL;
//
// FIXME: This would be much better if we had hierarchical register
// classes! Until then, hardcode registers so that we can deal with
// their aliases (because we don't have conditional byte moves).
//
BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r).addImm(LowCst);
BuildMI(*MBB, IP, SetCCOpcodeTab[0][OpNum], 0, X86::AL);
BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r+1).addImm(HiCst);
BuildMI(*MBB, IP, SetCCOpcodeTab[CompTy->isSigned()][OpNum], 0,X86::BL);
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::BH);
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::AH);
BuildMI(*MBB, IP, X86::CMOVE16rr, 2, X86::BX).addReg(X86::BX)
.addReg(X86::AX);
// NOTE: visitSetCondInst knows that the value is dumped into the BL
// register at this point for long values...
return OpNum;
}
}
}
unsigned Op0r = getReg(Op0, MBB, IP);
// Special case handling of comparison against +/- 0.0
if (ConstantFP *CFP = dyn_cast<ConstantFP>(Op1))
if (CFP->isExactlyValue(+0.0) || CFP->isExactlyValue(-0.0)) {
BuildMI(*MBB, IP, X86::FTST, 1).addReg(Op0r);
BuildMI(*MBB, IP, X86::FNSTSW8r, 0);
BuildMI(*MBB, IP, X86::SAHF, 1);
return OpNum;
}
unsigned Op1r = getReg(Op1, MBB, IP);
switch (Class) {
default: assert(0 && "Unknown type class!");
// Emit: cmp <var1>, <var2> (do the comparison). We can
// compare 8-bit with 8-bit, 16-bit with 16-bit, 32-bit with
// 32-bit.
case cByte:
BuildMI(*MBB, IP, X86::CMP8rr, 2).addReg(Op0r).addReg(Op1r);
break;
case cShort:
BuildMI(*MBB, IP, X86::CMP16rr, 2).addReg(Op0r).addReg(Op1r);
break;
case cInt:
BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r).addReg(Op1r);
break;
case cFP:
emitUCOMr(MBB, IP, Op0r, Op1r);
break;
case cLong:
if (OpNum < 2) { // seteq, setne
unsigned LoTmp = makeAnotherReg(Type::IntTy);
unsigned HiTmp = makeAnotherReg(Type::IntTy);
unsigned FinalTmp = makeAnotherReg(Type::IntTy);
BuildMI(*MBB, IP, X86::XOR32rr, 2, LoTmp).addReg(Op0r).addReg(Op1r);
BuildMI(*MBB, IP, X86::XOR32rr, 2, HiTmp).addReg(Op0r+1).addReg(Op1r+1);
BuildMI(*MBB, IP, X86::OR32rr, 2, FinalTmp).addReg(LoTmp).addReg(HiTmp);
break; // Allow the sete or setne to be generated from flags set by OR
} else {
// Emit a sequence of code which compares the high and low parts once
// each, then uses a conditional move to handle the overflow case. For
// example, a setlt for long would generate code like this:
//
// AL = lo(op1) < lo(op2) // Signedness depends on operands
// BL = hi(op1) < hi(op2) // Always unsigned comparison
// dest = hi(op1) == hi(op2) ? BL : AL;
//
// FIXME: This would be much better if we had hierarchical register
// classes! Until then, hardcode registers so that we can deal with their
// aliases (because we don't have conditional byte moves).
//
BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r).addReg(Op1r);
BuildMI(*MBB, IP, SetCCOpcodeTab[0][OpNum], 0, X86::AL);
BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r+1).addReg(Op1r+1);
BuildMI(*MBB, IP, SetCCOpcodeTab[CompTy->isSigned()][OpNum], 0, X86::BL);
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::BH);
BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::AH);
BuildMI(*MBB, IP, X86::CMOVE16rr, 2, X86::BX).addReg(X86::BX)
.addReg(X86::AX);
// NOTE: visitSetCondInst knows that the value is dumped into the BL
// register at this point for long values...
return OpNum;
}
}
return OpNum;
}
/// SetCC instructions - Here we just emit boilerplate code to set a byte-sized
/// register, then move it to wherever the result should be.
///
void X86ISel::visitSetCondInst(SetCondInst &I) {
if (canFoldSetCCIntoBranchOrSelect(&I))
return; // Fold this into a branch or select.
unsigned DestReg = getReg(I);
MachineBasicBlock::iterator MII = BB->end();
emitSetCCOperation(BB, MII, I.getOperand(0), I.getOperand(1), I.getOpcode(),
DestReg);
}
/// emitSetCCOperation - Common code shared between visitSetCondInst and
/// constant expression support.
///
void X86ISel::emitSetCCOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, unsigned Opcode,
unsigned TargetReg) {
unsigned OpNum = getSetCCNumber(Opcode);
OpNum = EmitComparison(OpNum, Op0, Op1, MBB, IP);
const Type *CompTy = Op0->getType();
unsigned CompClass = getClassB(CompTy);
bool isSigned = CompTy->isSigned() && CompClass != cFP;
if (CompClass != cLong || OpNum < 2) {
// Handle normal comparisons with a setcc instruction...
BuildMI(*MBB, IP, SetCCOpcodeTab[isSigned][OpNum], 0, TargetReg);
} else {
// Handle long comparisons by copying the value which is already in BL into
// the register we want...
BuildMI(*MBB, IP, X86::MOV8rr, 1, TargetReg).addReg(X86::BL);
}
}
void X86ISel::visitSelectInst(SelectInst &SI) {
unsigned DestReg = getReg(SI);
MachineBasicBlock::iterator MII = BB->end();
emitSelectOperation(BB, MII, SI.getCondition(), SI.getTrueValue(),
SI.getFalseValue(), DestReg);
}
/// emitSelect - Common code shared between visitSelectInst and the constant
/// expression support.
void X86ISel::emitSelectOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Cond, Value *TrueVal, Value *FalseVal,
unsigned DestReg) {
unsigned SelectClass = getClassB(TrueVal->getType());
// We don't support 8-bit conditional moves. If we have incoming constants,
// transform them into 16-bit constants to avoid having a run-time conversion.
if (SelectClass == cByte) {
if (Constant *T = dyn_cast<Constant>(TrueVal))
TrueVal = ConstantExpr::getCast(T, Type::ShortTy);
if (Constant *F = dyn_cast<Constant>(FalseVal))
FalseVal = ConstantExpr::getCast(F, Type::ShortTy);
}
unsigned TrueReg = getReg(TrueVal, MBB, IP);
unsigned FalseReg = getReg(FalseVal, MBB, IP);
if (TrueReg == FalseReg) {
static const unsigned Opcode[] = {
X86::MOV8rr, X86::MOV16rr, X86::MOV32rr, X86::FpMOV, X86::MOV32rr
};
BuildMI(*MBB, IP, Opcode[SelectClass], 1, DestReg).addReg(TrueReg);
if (SelectClass == cLong)
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(TrueReg+1);
return;
}
unsigned Opcode;
if (SetCondInst *SCI = canFoldSetCCIntoBranchOrSelect(Cond)) {
// We successfully folded the setcc into the select instruction.
unsigned OpNum = getSetCCNumber(SCI->getOpcode());
OpNum = EmitComparison(OpNum, SCI->getOperand(0), SCI->getOperand(1), MBB,
IP);
const Type *CompTy = SCI->getOperand(0)->getType();
bool isSigned = CompTy->isSigned() && getClassB(CompTy) != cFP;
// LLVM -> X86 signed X86 unsigned
// ----- ---------- ------------
// seteq -> cmovNE cmovNE
// setne -> cmovE cmovE
// setlt -> cmovGE cmovAE
// setge -> cmovL cmovB
// setgt -> cmovLE cmovBE
// setle -> cmovG cmovA
// ----
// cmovNS // Used by comparison with 0 optimization
// cmovS
switch (SelectClass) {
default: assert(0 && "Unknown value class!");
case cFP: {
// Annoyingly, we don't have a full set of floating point conditional
// moves. :(
static const unsigned OpcodeTab[2][8] = {
{ X86::FCMOVNE, X86::FCMOVE, X86::FCMOVAE, X86::FCMOVB,
X86::FCMOVBE, X86::FCMOVA, 0, 0 },
{ X86::FCMOVNE, X86::FCMOVE, 0, 0, 0, 0, 0, 0 },
};
Opcode = OpcodeTab[isSigned][OpNum];
// If opcode == 0, we hit a case that we don't support. Output a setcc
// and compare the result against zero.
if (Opcode == 0) {
unsigned CompClass = getClassB(CompTy);
unsigned CondReg;
if (CompClass != cLong || OpNum < 2) {
CondReg = makeAnotherReg(Type::BoolTy);
// Handle normal comparisons with a setcc instruction...
BuildMI(*MBB, IP, SetCCOpcodeTab[isSigned][OpNum], 0, CondReg);
} else {
// Long comparisons end up in the BL register.
CondReg = X86::BL;
}
BuildMI(*MBB, IP, X86::TEST8rr, 2).addReg(CondReg).addReg(CondReg);
Opcode = X86::FCMOVE;
}
break;
}
case cByte:
case cShort: {
static const unsigned OpcodeTab[2][8] = {
{ X86::CMOVNE16rr, X86::CMOVE16rr, X86::CMOVAE16rr, X86::CMOVB16rr,
X86::CMOVBE16rr, X86::CMOVA16rr, 0, 0 },
{ X86::CMOVNE16rr, X86::CMOVE16rr, X86::CMOVGE16rr, X86::CMOVL16rr,
X86::CMOVLE16rr, X86::CMOVG16rr, X86::CMOVNS16rr, X86::CMOVS16rr },
};
Opcode = OpcodeTab[isSigned][OpNum];
break;
}
case cInt:
case cLong: {
static const unsigned OpcodeTab[2][8] = {
{ X86::CMOVNE32rr, X86::CMOVE32rr, X86::CMOVAE32rr, X86::CMOVB32rr,
X86::CMOVBE32rr, X86::CMOVA32rr, 0, 0 },
{ X86::CMOVNE32rr, X86::CMOVE32rr, X86::CMOVGE32rr, X86::CMOVL32rr,
X86::CMOVLE32rr, X86::CMOVG32rr, X86::CMOVNS32rr, X86::CMOVS32rr },
};
Opcode = OpcodeTab[isSigned][OpNum];
break;
}
}
} else {
// Get the value being branched on, and use it to set the condition codes.
unsigned CondReg = getReg(Cond, MBB, IP);
BuildMI(*MBB, IP, X86::TEST8rr, 2).addReg(CondReg).addReg(CondReg);
switch (SelectClass) {
default: assert(0 && "Unknown value class!");
case cFP: Opcode = X86::FCMOVE; break;
case cByte:
case cShort: Opcode = X86::CMOVE16rr; break;
case cInt:
case cLong: Opcode = X86::CMOVE32rr; break;
}
}
unsigned RealDestReg = DestReg;
// Annoyingly enough, X86 doesn't HAVE 8-bit conditional moves. Because of
// this, we have to promote the incoming values to 16 bits, perform a 16-bit
// cmove, then truncate the result.
if (SelectClass == cByte) {
DestReg = makeAnotherReg(Type::ShortTy);
if (getClassB(TrueVal->getType()) == cByte) {
// Promote the true value, by storing it into AL, and reading from AX.
BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::AL).addReg(TrueReg);
BuildMI(*MBB, IP, X86::MOV8ri, 1, X86::AH).addImm(0);
TrueReg = makeAnotherReg(Type::ShortTy);
BuildMI(*MBB, IP, X86::MOV16rr, 1, TrueReg).addReg(X86::AX);
}
if (getClassB(FalseVal->getType()) == cByte) {
// Promote the true value, by storing it into CL, and reading from CX.
BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(FalseReg);
BuildMI(*MBB, IP, X86::MOV8ri, 1, X86::CH).addImm(0);
FalseReg = makeAnotherReg(Type::ShortTy);
BuildMI(*MBB, IP, X86::MOV16rr, 1, FalseReg).addReg(X86::CX);
}
}
BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(TrueReg).addReg(FalseReg);
switch (SelectClass) {
case cByte:
// We did the computation with 16-bit registers. Truncate back to our
// result by copying into AX then copying out AL.
BuildMI(*MBB, IP, X86::MOV16rr, 1, X86::AX).addReg(DestReg);
BuildMI(*MBB, IP, X86::MOV8rr, 1, RealDestReg).addReg(X86::AL);
break;
case cLong:
// Move the upper half of the value as well.
BuildMI(*MBB, IP, Opcode, 2,DestReg+1).addReg(TrueReg+1).addReg(FalseReg+1);
break;
}
}
/// promote32 - Emit instructions to turn a narrow operand into a 32-bit-wide
/// operand, in the specified target register.
///
void X86ISel::promote32(unsigned targetReg, const ValueRecord &VR) {
bool isUnsigned = VR.Ty->isUnsigned() || VR.Ty == Type::BoolTy;
Value *Val = VR.Val;
const Type *Ty = VR.Ty;
if (Val) {
if (Constant *C = dyn_cast<Constant>(Val)) {
Val = ConstantExpr::getCast(C, Type::IntTy);
Ty = Type::IntTy;
}
// If this is a simple constant, just emit a MOVri directly to avoid the
// copy.
if (ConstantInt *CI = dyn_cast<ConstantInt>(Val)) {
int TheVal = CI->getRawValue() & 0xFFFFFFFF;
BuildMI(BB, X86::MOV32ri, 1, targetReg).addImm(TheVal);
return;
}
}
// Make sure we have the register number for this value...
unsigned Reg = Val ? getReg(Val) : VR.Reg;
switch (getClassB(Ty)) {
case cByte:
// Extend value into target register (8->32)
if (isUnsigned)
BuildMI(BB, X86::MOVZX32rr8, 1, targetReg).addReg(Reg);
else
BuildMI(BB, X86::MOVSX32rr8, 1, targetReg).addReg(Reg);
break;
case cShort:
// Extend value into target register (16->32)
if (isUnsigned)
BuildMI(BB, X86::MOVZX32rr16, 1, targetReg).addReg(Reg);
else
BuildMI(BB, X86::MOVSX32rr16, 1, targetReg).addReg(Reg);
break;
case cInt:
// Move value into target register (32->32)
BuildMI(BB, X86::MOV32rr, 1, targetReg).addReg(Reg);
break;
default:
assert(0 && "Unpromotable operand class in promote32");
}
}
/// 'ret' instruction - Here we are interested in meeting the x86 ABI. As such,
/// we have the following possibilities:
///
/// ret void: No return value, simply emit a 'ret' instruction
/// ret sbyte, ubyte : Extend value into EAX and return
/// ret short, ushort: Extend value into EAX and return
/// ret int, uint : Move value into EAX and return
/// ret pointer : Move value into EAX and return
/// ret long, ulong : Move value into EAX/EDX and return
/// ret float/double : Top of FP stack
///
void X86ISel::visitReturnInst(ReturnInst &I) {
if (I.getNumOperands() == 0) {
BuildMI(BB, X86::RET, 0); // Just emit a 'ret' instruction
return;
}
Value *RetVal = I.getOperand(0);
switch (getClassB(RetVal->getType())) {
case cByte: // integral return values: extend or move into EAX and return
case cShort:
case cInt:
promote32(X86::EAX, ValueRecord(RetVal));
// Declare that EAX is live on exit
BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::EAX).addReg(X86::ESP);
break;
case cFP: { // Floats & Doubles: Return in ST(0)
unsigned RetReg = getReg(RetVal);
BuildMI(BB, X86::FpSETRESULT, 1).addReg(RetReg);
// Declare that top-of-stack is live on exit
BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::ST0).addReg(X86::ESP);
break;
}
case cLong: {
unsigned RetReg = getReg(RetVal);
BuildMI(BB, X86::MOV32rr, 1, X86::EAX).addReg(RetReg);
BuildMI(BB, X86::MOV32rr, 1, X86::EDX).addReg(RetReg+1);
// Declare that EAX & EDX are live on exit
BuildMI(BB, X86::IMPLICIT_USE, 3).addReg(X86::EAX).addReg(X86::EDX)
.addReg(X86::ESP);
break;
}
default:
visitInstruction(I);
}
// Emit a 'ret' instruction
BuildMI(BB, X86::RET, 0);
}
// getBlockAfter - Return the basic block which occurs lexically after the
// specified one.
static inline BasicBlock *getBlockAfter(BasicBlock *BB) {
Function::iterator I = BB; ++I; // Get iterator to next block
return I != BB->getParent()->end() ? &*I : 0;
}
/// visitBranchInst - Handle conditional and unconditional branches here. Note
/// that since code layout is frozen at this point, that if we are trying to
/// jump to a block that is the immediate successor of the current block, we can
/// just make a fall-through (but we don't currently).
///
void X86ISel::visitBranchInst(BranchInst &BI) {
// Update machine-CFG edges
BB->addSuccessor (MBBMap[BI.getSuccessor(0)]);
if (BI.isConditional())
BB->addSuccessor (MBBMap[BI.getSuccessor(1)]);
BasicBlock *NextBB = getBlockAfter(BI.getParent()); // BB after current one
if (!BI.isConditional()) { // Unconditional branch?
if (BI.getSuccessor(0) != NextBB)
BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
return;
}
// See if we can fold the setcc into the branch itself...
SetCondInst *SCI = canFoldSetCCIntoBranchOrSelect(BI.getCondition());
if (SCI == 0) {
// Nope, cannot fold setcc into this branch. Emit a branch on a condition
// computed some other way...
unsigned condReg = getReg(BI.getCondition());
BuildMI(BB, X86::TEST8rr, 2).addReg(condReg).addReg(condReg);
if (BI.getSuccessor(1) == NextBB) {
if (BI.getSuccessor(0) != NextBB)
BuildMI(BB, X86::JNE, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
} else {
BuildMI(BB, X86::JE, 1).addMBB(MBBMap[BI.getSuccessor(1)]);
if (BI.getSuccessor(0) != NextBB)
BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
}
return;
}
unsigned OpNum = getSetCCNumber(SCI->getOpcode());
MachineBasicBlock::iterator MII = BB->end();
OpNum = EmitComparison(OpNum, SCI->getOperand(0), SCI->getOperand(1), BB,MII);
const Type *CompTy = SCI->getOperand(0)->getType();
bool isSigned = CompTy->isSigned() && getClassB(CompTy) != cFP;
// LLVM -> X86 signed X86 unsigned
// ----- ---------- ------------
// seteq -> je je
// setne -> jne jne
// setlt -> jl jb
// setge -> jge jae
// setgt -> jg ja
// setle -> jle jbe
// ----
// js // Used by comparison with 0 optimization
// jns
static const unsigned OpcodeTab[2][8] = {
{ X86::JE, X86::JNE, X86::JB, X86::JAE, X86::JA, X86::JBE, 0, 0 },
{ X86::JE, X86::JNE, X86::JL, X86::JGE, X86::JG, X86::JLE,
X86::JS, X86::JNS },
};
if (BI.getSuccessor(0) != NextBB) {
BuildMI(BB, OpcodeTab[isSigned][OpNum], 1)
.addMBB(MBBMap[BI.getSuccessor(0)]);
if (BI.getSuccessor(1) != NextBB)
BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(1)]);
} else {
// Change to the inverse condition...
if (BI.getSuccessor(1) != NextBB) {
OpNum ^= 1;
BuildMI(BB, OpcodeTab[isSigned][OpNum], 1)
.addMBB(MBBMap[BI.getSuccessor(1)]);
}
}
}
/// doCall - This emits an abstract call instruction, setting up the arguments
/// and the return value as appropriate. For the actual function call itself,
/// it inserts the specified CallMI instruction into the stream.
///
void X86ISel::doCall(const ValueRecord &Ret, MachineInstr *CallMI,
const std::vector<ValueRecord> &Args) {
// Count how many bytes are to be pushed on the stack...
unsigned NumBytes = 0;
if (!Args.empty()) {
for (unsigned i = 0, e = Args.size(); i != e; ++i)
switch (getClassB(Args[i].Ty)) {
case cByte: case cShort: case cInt:
NumBytes += 4; break;
case cLong:
NumBytes += 8; break;
case cFP:
NumBytes += Args[i].Ty == Type::FloatTy ? 4 : 8;
break;
default: assert(0 && "Unknown class!");
}
// Adjust the stack pointer for the new arguments...
BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addImm(NumBytes);
// Arguments go on the stack in reverse order, as specified by the ABI.
unsigned ArgOffset = 0;
for (unsigned i = 0, e = Args.size(); i != e; ++i) {
unsigned ArgReg;
switch (getClassB(Args[i].Ty)) {
case cByte:
if (Args[i].Val && isa<ConstantBool>(Args[i].Val)) {
addRegOffset(BuildMI(BB, X86::MOV32mi, 5), X86::ESP, ArgOffset)
.addImm(Args[i].Val == ConstantBool::True);
break;
}
// FALL THROUGH
case cShort:
if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
// Zero/Sign extend constant, then stuff into memory.
ConstantInt *Val = cast<ConstantInt>(Args[i].Val);
Val = cast<ConstantInt>(ConstantExpr::getCast(Val, Type::IntTy));
addRegOffset(BuildMI(BB, X86::MOV32mi, 5), X86::ESP, ArgOffset)
.addImm(Val->getRawValue() & 0xFFFFFFFF);
} else {
// Promote arg to 32 bits wide into a temporary register...
ArgReg = makeAnotherReg(Type::UIntTy);
promote32(ArgReg, Args[i]);
addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
X86::ESP, ArgOffset).addReg(ArgReg);
}
break;
case cInt:
if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
unsigned Val = cast<ConstantInt>(Args[i].Val)->getRawValue();
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset).addImm(Val);
} else if (Args[i].Val && isa<ConstantPointerNull>(Args[i].Val)) {
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset).addImm(0);
} else {
ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
X86::ESP, ArgOffset).addReg(ArgReg);
}
break;
case cLong:
if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
uint64_t Val = cast<ConstantInt>(Args[i].Val)->getRawValue();
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset).addImm(Val & ~0U);
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset+4).addImm(Val >> 32ULL);
} else {
ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
X86::ESP, ArgOffset).addReg(ArgReg);
addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
X86::ESP, ArgOffset+4).addReg(ArgReg+1);
}
ArgOffset += 4; // 8 byte entry, not 4.
break;
case cFP:
if (ConstantFP *CFP = dyn_cast_or_null<ConstantFP>(Args[i].Val)) {
// Store constant FP values with integer instructions to avoid having
// to load the constants from the constant pool then do a store.
if (CFP->getType() == Type::FloatTy) {
union {
unsigned I;
float F;
} V;
V.F = CFP->getValue();
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset).addImm(V.I);
} else {
union {
uint64_t I;
double F;
} V;
V.F = CFP->getValue();
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset).addImm((unsigned)V.I);
addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
X86::ESP, ArgOffset+4).addImm(unsigned(V.I >> 32));
ArgOffset += 4; // 8 byte entry, not 4.
}
} else {
ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
if (Args[i].Ty == Type::FloatTy) {
addRegOffset(BuildMI(BB, X86::FST32m, 5),
X86::ESP, ArgOffset).addReg(ArgReg);
} else {
assert(Args[i].Ty == Type::DoubleTy && "Unknown FP type!");
addRegOffset(BuildMI(BB, X86::FST64m, 5),
X86::ESP, ArgOffset).addReg(ArgReg);
ArgOffset += 4; // 8 byte entry, not 4.
}
}
break;
default: assert(0 && "Unknown class!");
}
ArgOffset += 4;
}
} else {
BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addImm(0);
}
BB->push_back(CallMI);
BuildMI(BB, X86::ADJCALLSTACKUP, 1).addImm(NumBytes);
// If there is a return value, scavenge the result from the location the call
// leaves it in...
//
if (Ret.Ty != Type::VoidTy) {
unsigned DestClass = getClassB(Ret.Ty);
switch (DestClass) {
case cByte:
case cShort:
case cInt: {
// Integral results are in %eax, or the appropriate portion
// thereof.
static const unsigned regRegMove[] = {
X86::MOV8rr, X86::MOV16rr, X86::MOV32rr
};
static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX };
BuildMI(BB, regRegMove[DestClass], 1, Ret.Reg).addReg(AReg[DestClass]);
break;
}
case cFP: // Floating-point return values live in %ST(0)
BuildMI(BB, X86::FpGETRESULT, 1, Ret.Reg);
break;
case cLong: // Long values are left in EDX:EAX
BuildMI(BB, X86::MOV32rr, 1, Ret.Reg).addReg(X86::EAX);
BuildMI(BB, X86::MOV32rr, 1, Ret.Reg+1).addReg(X86::EDX);
break;
default: assert(0 && "Unknown class!");
}
}
}
/// visitCallInst - Push args on stack and do a procedure call instruction.
void X86ISel::visitCallInst(CallInst &CI) {
MachineInstr *TheCall;
if (Function *F = CI.getCalledFunction()) {
// Is it an intrinsic function call?
if (Intrinsic::ID ID = (Intrinsic::ID)F->getIntrinsicID()) {
visitIntrinsicCall(ID, CI); // Special intrinsics are not handled here
return;
}
// Emit a CALL instruction with PC-relative displacement.
TheCall = BuildMI(X86::CALLpcrel32, 1).addGlobalAddress(F, true);
} else { // Emit an indirect call...
unsigned Reg = getReg(CI.getCalledValue());
TheCall = BuildMI(X86::CALL32r, 1).addReg(Reg);
}
std::vector<ValueRecord> Args;
for (unsigned i = 1, e = CI.getNumOperands(); i != e; ++i)
Args.push_back(ValueRecord(CI.getOperand(i)));
unsigned DestReg = CI.getType() != Type::VoidTy ? getReg(CI) : 0;
doCall(ValueRecord(DestReg, CI.getType()), TheCall, Args);
}
/// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
/// function, lowering any calls to unknown intrinsic functions into the
/// equivalent LLVM code.
///
void X86ISel::LowerUnknownIntrinsicFunctionCalls(Function &F) {
for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; )
if (CallInst *CI = dyn_cast<CallInst>(I++))
if (Function *F = CI->getCalledFunction())
switch (F->getIntrinsicID()) {
case Intrinsic::not_intrinsic:
case Intrinsic::vastart:
case Intrinsic::vacopy:
case Intrinsic::vaend:
case Intrinsic::returnaddress:
case Intrinsic::frameaddress:
case Intrinsic::memcpy:
case Intrinsic::memset:
case Intrinsic::isunordered:
case Intrinsic::readport:
case Intrinsic::writeport:
// We directly implement these intrinsics
break;
case Intrinsic::readio: {
// On X86, memory operations are in-order. Lower this intrinsic
// into a volatile load.
Instruction *Before = CI->getPrev();
LoadInst * LI = new LoadInst(CI->getOperand(1), "", true, CI);
CI->replaceAllUsesWith(LI);
BB->getInstList().erase(CI);
break;
}
case Intrinsic::writeio: {
// On X86, memory operations are in-order. Lower this intrinsic
// into a volatile store.
Instruction *Before = CI->getPrev();
StoreInst *LI = new StoreInst(CI->getOperand(1),
CI->getOperand(2), true, CI);
CI->replaceAllUsesWith(LI);
BB->getInstList().erase(CI);
break;
}
default:
// All other intrinsic calls we must lower.
Instruction *Before = CI->getPrev();
TM.getIntrinsicLowering().LowerIntrinsicCall(CI);
if (Before) { // Move iterator to instruction after call
I = Before; ++I;
} else {
I = BB->begin();
}
}
}
void X86ISel::visitIntrinsicCall(Intrinsic::ID ID, CallInst &CI) {
unsigned TmpReg1, TmpReg2;
switch (ID) {
case Intrinsic::vastart:
// Get the address of the first vararg value...
TmpReg1 = getReg(CI);
addFrameReference(BuildMI(BB, X86::LEA32r, 5, TmpReg1), VarArgsFrameIndex);
return;
case Intrinsic::vacopy:
TmpReg1 = getReg(CI);
TmpReg2 = getReg(CI.getOperand(1));
BuildMI(BB, X86::MOV32rr, 1, TmpReg1).addReg(TmpReg2);
return;
case Intrinsic::vaend: return; // Noop on X86
case Intrinsic::returnaddress:
case Intrinsic::frameaddress:
TmpReg1 = getReg(CI);
if (cast<Constant>(CI.getOperand(1))->isNullValue()) {
if (ReturnAddressIndex == 0) {
// Set up a frame object for the return address.
ReturnAddressIndex = F->getFrameInfo()->CreateFixedObject(4, -4);
}
if (ID == Intrinsic::returnaddress) {
// Just load the return address
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, TmpReg1),
ReturnAddressIndex);
} else {
addFrameReference(BuildMI(BB, X86::LEA32r, 4, TmpReg1),
ReturnAddressIndex, -4);
}
} else {
// Values other than zero are not implemented yet.
BuildMI(BB, X86::MOV32ri, 1, TmpReg1).addImm(0);
}
return;
case Intrinsic::isunordered:
TmpReg1 = getReg(CI.getOperand(1));
TmpReg2 = getReg(CI.getOperand(2));
emitUCOMr(BB, BB->end(), TmpReg2, TmpReg1);
TmpReg2 = getReg(CI);
BuildMI(BB, X86::SETPr, 0, TmpReg2);
return;
case Intrinsic::memcpy: {
assert(CI.getNumOperands() == 5 && "Illegal llvm.memcpy call!");
unsigned Align = 1;
if (ConstantInt *AlignC = dyn_cast<ConstantInt>(CI.getOperand(4))) {
Align = AlignC->getRawValue();
if (Align == 0) Align = 1;
}
// Turn the byte code into # iterations
unsigned CountReg;
unsigned Opcode;
switch (Align & 3) {
case 2: // WORD aligned
if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
CountReg = getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/2));
} else {
CountReg = makeAnotherReg(Type::IntTy);
unsigned ByteReg = getReg(CI.getOperand(3));
BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(1);
}
Opcode = X86::REP_MOVSW;
break;
case 0: // DWORD aligned
if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
CountReg = getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/4));
} else {
CountReg = makeAnotherReg(Type::IntTy);
unsigned ByteReg = getReg(CI.getOperand(3));
BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(2);
}
Opcode = X86::REP_MOVSD;
break;
default: // BYTE aligned
CountReg = getReg(CI.getOperand(3));
Opcode = X86::REP_MOVSB;
break;
}
// No matter what the alignment is, we put the source in ESI, the
// destination in EDI, and the count in ECX.
TmpReg1 = getReg(CI.getOperand(1));
TmpReg2 = getReg(CI.getOperand(2));
BuildMI(BB, X86::MOV32rr, 1, X86::ECX).addReg(CountReg);
BuildMI(BB, X86::MOV32rr, 1, X86::EDI).addReg(TmpReg1);
BuildMI(BB, X86::MOV32rr, 1, X86::ESI).addReg(TmpReg2);
BuildMI(BB, Opcode, 0);
return;
}
case Intrinsic::memset: {
assert(CI.getNumOperands() == 5 && "Illegal llvm.memset call!");
unsigned Align = 1;
if (ConstantInt *AlignC = dyn_cast<ConstantInt>(CI.getOperand(4))) {
Align = AlignC->getRawValue();
if (Align == 0) Align = 1;
}
// Turn the byte code into # iterations
unsigned CountReg;
unsigned Opcode;
if (ConstantInt *ValC = dyn_cast<ConstantInt>(CI.getOperand(2))) {
unsigned Val = ValC->getRawValue() & 255;
// If the value is a constant, then we can potentially use larger copies.
switch (Align & 3) {
case 2: // WORD aligned
if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
CountReg =getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/2));
} else {
CountReg = makeAnotherReg(Type::IntTy);
unsigned ByteReg = getReg(CI.getOperand(3));
BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(1);
}
BuildMI(BB, X86::MOV16ri, 1, X86::AX).addImm((Val << 8) | Val);
Opcode = X86::REP_STOSW;
break;
case 0: // DWORD aligned
if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
CountReg =getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/4));
} else {
CountReg = makeAnotherReg(Type::IntTy);
unsigned ByteReg = getReg(CI.getOperand(3));
BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(2);
}
Val = (Val << 8) | Val;
BuildMI(BB, X86::MOV32ri, 1, X86::EAX).addImm((Val << 16) | Val);
Opcode = X86::REP_STOSD;
break;
default: // BYTE aligned
CountReg = getReg(CI.getOperand(3));
BuildMI(BB, X86::MOV8ri, 1, X86::AL).addImm(Val);
Opcode = X86::REP_STOSB;
break;
}
} else {
// If it's not a constant value we are storing, just fall back. We could
// try to be clever to form 16 bit and 32 bit values, but we don't yet.
unsigned ValReg = getReg(CI.getOperand(2));
BuildMI(BB, X86::MOV8rr, 1, X86::AL).addReg(ValReg);
CountReg = getReg(CI.getOperand(3));
Opcode = X86::REP_STOSB;
}
// No matter what the alignment is, we put the source in ESI, the
// destination in EDI, and the count in ECX.
TmpReg1 = getReg(CI.getOperand(1));
//TmpReg2 = getReg(CI.getOperand(2));
BuildMI(BB, X86::MOV32rr, 1, X86::ECX).addReg(CountReg);
BuildMI(BB, X86::MOV32rr, 1, X86::EDI).addReg(TmpReg1);
BuildMI(BB, Opcode, 0);
return;
}
case Intrinsic::readport: {
// First, determine that the size of the operand falls within the acceptable
// range for this architecture.
//
if (getClassB(CI.getOperand(1)->getType()) != cShort) {
std::cerr << "llvm.readport: Address size is not 16 bits\n";
exit(1);
}
// Now, move the I/O port address into the DX register and use the IN
// instruction to get the input data.
//
unsigned Class = getClass(CI.getCalledFunction()->getReturnType());
unsigned DestReg = getReg(CI);
// If the port is a single-byte constant, use the immediate form.
if (ConstantInt *C = dyn_cast<ConstantInt>(CI.getOperand(1)))
if ((C->getRawValue() & 255) == C->getRawValue()) {
switch (Class) {
case cByte:
BuildMI(BB, X86::IN8ri, 1).addImm((unsigned char)C->getRawValue());
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
return;
case cShort:
BuildMI(BB, X86::IN16ri, 1).addImm((unsigned char)C->getRawValue());
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AX);
return;
case cInt:
BuildMI(BB, X86::IN32ri, 1).addImm((unsigned char)C->getRawValue());
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::EAX);
return;
}
}
unsigned Reg = getReg(CI.getOperand(1));
BuildMI(BB, X86::MOV16rr, 1, X86::DX).addReg(Reg);
switch (Class) {
case cByte:
BuildMI(BB, X86::IN8rr, 0);
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
break;
case cShort:
BuildMI(BB, X86::IN16rr, 0);
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AX);
break;
case cInt:
BuildMI(BB, X86::IN32rr, 0);
BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::EAX);
break;
default:
std::cerr << "Cannot do input on this data type";
exit (1);
}
return;
}
case Intrinsic::writeport: {
// First, determine that the size of the operand falls within the
// acceptable range for this architecture.
if (getClass(CI.getOperand(2)->getType()) != cShort) {
std::cerr << "llvm.writeport: Address size is not 16 bits\n";
exit(1);
}
unsigned Class = getClassB(CI.getOperand(1)->getType());
unsigned ValReg = getReg(CI.getOperand(1));
switch (Class) {
case cByte:
BuildMI(BB, X86::MOV8rr, 1, X86::AL).addReg(ValReg);
break;
case cShort:
BuildMI(BB, X86::MOV16rr, 1, X86::AX).addReg(ValReg);
break;
case cInt:
BuildMI(BB, X86::MOV32rr, 1, X86::EAX).addReg(ValReg);
break;
default:
std::cerr << "llvm.writeport: invalid data type for X86 target";
exit(1);
}
// If the port is a single-byte constant, use the immediate form.
if (ConstantInt *C = dyn_cast<ConstantInt>(CI.getOperand(2)))
if ((C->getRawValue() & 255) == C->getRawValue()) {
static const unsigned O[] = { X86::OUT8ir, X86::OUT16ir, X86::OUT32ir };
BuildMI(BB, O[Class], 1).addImm((unsigned char)C->getRawValue());
return;
}
// Otherwise, move the I/O port address into the DX register and the value
// to write into the AL/AX/EAX register.
static const unsigned Opc[] = { X86::OUT8rr, X86::OUT16rr, X86::OUT32rr };
unsigned Reg = getReg(CI.getOperand(2));
BuildMI(BB, X86::MOV16rr, 1, X86::DX).addReg(Reg);
BuildMI(BB, Opc[Class], 0);
return;
}
default: assert(0 && "Error: unknown intrinsics should have been lowered!");
}
}
static bool isSafeToFoldLoadIntoInstruction(LoadInst &LI, Instruction &User) {
if (LI.getParent() != User.getParent())
return false;
BasicBlock::iterator It = &LI;
// Check all of the instructions between the load and the user. We should
// really use alias analysis here, but for now we just do something simple.
for (++It; It != BasicBlock::iterator(&User); ++It) {
switch (It->getOpcode()) {
case Instruction::Free:
case Instruction::Store:
case Instruction::Call:
case Instruction::Invoke:
return false;
case Instruction::Load:
if (cast<LoadInst>(It)->isVolatile() && LI.isVolatile())
return false;
break;
}
}
return true;
}
/// visitSimpleBinary - Implement simple binary operators for integral types...
/// OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for Or, 4 for
/// Xor.
///
void X86ISel::visitSimpleBinary(BinaryOperator &B, unsigned OperatorClass) {
unsigned DestReg = getReg(B);
MachineBasicBlock::iterator MI = BB->end();
Value *Op0 = B.getOperand(0), *Op1 = B.getOperand(1);
unsigned Class = getClassB(B.getType());
// If this is AND X, C, and it is only used by a setcc instruction, it will
// be folded. There is no need to emit this instruction.
if (B.hasOneUse() && OperatorClass == 2 && isa<ConstantInt>(Op1))
if (Class == cByte || Class == cShort || Class == cInt) {
Instruction *Use = cast<Instruction>(B.use_back());
if (isa<SetCondInst>(Use) &&
Use->getOperand(1) == Constant::getNullValue(B.getType())) {
switch (getSetCCNumber(Use->getOpcode())) {
case 0:
case 1:
return;
default:
if (B.getType()->isSigned()) return;
}
}
}
// Special case: op Reg, load [mem]
if (isa<LoadInst>(Op0) && !isa<LoadInst>(Op1) && Class != cLong &&
Op0->hasOneUse() &&
isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op0), B))
if (!B.swapOperands())
std::swap(Op0, Op1); // Make sure any loads are in the RHS.
if (isa<LoadInst>(Op1) && Class != cLong && Op1->hasOneUse() &&
isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op1), B)) {
unsigned Opcode;
if (Class != cFP) {
static const unsigned OpcodeTab[][3] = {
// Arithmetic operators
{ X86::ADD8rm, X86::ADD16rm, X86::ADD32rm }, // ADD
{ X86::SUB8rm, X86::SUB16rm, X86::SUB32rm }, // SUB
// Bitwise operators
{ X86::AND8rm, X86::AND16rm, X86::AND32rm }, // AND
{ X86:: OR8rm, X86:: OR16rm, X86:: OR32rm }, // OR
{ X86::XOR8rm, X86::XOR16rm, X86::XOR32rm }, // XOR
};
Opcode = OpcodeTab[OperatorClass][Class];
} else {
static const unsigned OpcodeTab[][2] = {
{ X86::FADD32m, X86::FADD64m }, // ADD
{ X86::FSUB32m, X86::FSUB64m }, // SUB
};
const Type *Ty = Op0->getType();
assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
Opcode = OpcodeTab[OperatorClass][Ty == Type::DoubleTy];
}
unsigned Op0r = getReg(Op0);
if (AllocaInst *AI =
dyn_castFixedAlloca(cast<LoadInst>(Op1)->getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode, 5, DestReg).addReg(Op0r), FI);
} else {
X86AddressMode AM;
getAddressingMode(cast<LoadInst>(Op1)->getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode, 5, DestReg).addReg(Op0r), AM);
}
return;
}
// If this is a floating point subtract, check to see if we can fold the first
// operand in.
if (Class == cFP && OperatorClass == 1 &&
isa<LoadInst>(Op0) &&
isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op0), B)) {
const Type *Ty = Op0->getType();
assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = Ty == Type::FloatTy ? X86::FSUBR32m : X86::FSUBR64m;
unsigned Op1r = getReg(Op1);
if (AllocaInst *AI =
dyn_castFixedAlloca(cast<LoadInst>(Op0)->getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode, 5, DestReg).addReg(Op1r), FI);
} else {
X86AddressMode AM;
getAddressingMode(cast<LoadInst>(Op0)->getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode, 5, DestReg).addReg(Op1r), AM);
}
return;
}
emitSimpleBinaryOperation(BB, MI, Op0, Op1, OperatorClass, DestReg);
}
/// emitBinaryFPOperation - This method handles emission of floating point
/// Add (0), Sub (1), Mul (2), and Div (3) operations.
void X86ISel::emitBinaryFPOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1,
unsigned OperatorClass, unsigned DestReg) {
// Special case: op Reg, <const fp>
if (ConstantFP *Op1C = dyn_cast<ConstantFP>(Op1))
if (!Op1C->isExactlyValue(+0.0) && !Op1C->isExactlyValue(+1.0)) {
// Create a constant pool entry for this constant.
MachineConstantPool *CP = F->getConstantPool();
unsigned CPI = CP->getConstantPoolIndex(Op1C);
const Type *Ty = Op1->getType();
static const unsigned OpcodeTab[][4] = {
{ X86::FADD32m, X86::FSUB32m, X86::FMUL32m, X86::FDIV32m }, // Float
{ X86::FADD64m, X86::FSUB64m, X86::FMUL64m, X86::FDIV64m }, // Double
};
assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = OpcodeTab[Ty != Type::FloatTy][OperatorClass];
unsigned Op0r = getReg(Op0, BB, IP);
addConstantPoolReference(BuildMI(*BB, IP, Opcode, 5,
DestReg).addReg(Op0r), CPI);
return;
}
// Special case: R1 = op <const fp>, R2
if (ConstantFP *CFP = dyn_cast<ConstantFP>(Op0))
if (CFP->isExactlyValue(-0.0) && OperatorClass == 1) {
// -0.0 - X === -X
unsigned op1Reg = getReg(Op1, BB, IP);
BuildMI(*BB, IP, X86::FCHS, 1, DestReg).addReg(op1Reg);
return;
} else if (!CFP->isExactlyValue(+0.0) && !CFP->isExactlyValue(+1.0)) {
// R1 = op CST, R2 --> R1 = opr R2, CST
// Create a constant pool entry for this constant.
MachineConstantPool *CP = F->getConstantPool();
unsigned CPI = CP->getConstantPoolIndex(CFP);
const Type *Ty = CFP->getType();
static const unsigned OpcodeTab[][4] = {
{ X86::FADD32m, X86::FSUBR32m, X86::FMUL32m, X86::FDIVR32m }, // Float
{ X86::FADD64m, X86::FSUBR64m, X86::FMUL64m, X86::FDIVR64m }, // Double
};
assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = OpcodeTab[Ty != Type::FloatTy][OperatorClass];
unsigned Op1r = getReg(Op1, BB, IP);
addConstantPoolReference(BuildMI(*BB, IP, Opcode, 5,
DestReg).addReg(Op1r), CPI);
return;
}
// General case.
static const unsigned OpcodeTab[4] = {
X86::FpADD, X86::FpSUB, X86::FpMUL, X86::FpDIV
};
unsigned Opcode = OpcodeTab[OperatorClass];
unsigned Op0r = getReg(Op0, BB, IP);
unsigned Op1r = getReg(Op1, BB, IP);
BuildMI(*BB, IP, Opcode, 2, DestReg).addReg(Op0r).addReg(Op1r);
}
/// emitSimpleBinaryOperation - Implement simple binary operators for integral
/// types... OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for
/// Or, 4 for Xor.
///
/// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
/// and constant expression support.
///
void X86ISel::emitSimpleBinaryOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1,
unsigned OperatorClass,
unsigned DestReg) {
unsigned Class = getClassB(Op0->getType());
if (Class == cFP) {
assert(OperatorClass < 2 && "No logical ops for FP!");
emitBinaryFPOperation(MBB, IP, Op0, Op1, OperatorClass, DestReg);
return;
}
if (ConstantInt *CI = dyn_cast<ConstantInt>(Op0))
if (OperatorClass == 1) {
static unsigned const NEGTab[] = {
X86::NEG8r, X86::NEG16r, X86::NEG32r, 0, X86::NEG32r
};
// sub 0, X -> neg X
if (CI->isNullValue()) {
unsigned op1Reg = getReg(Op1, MBB, IP);
BuildMI(*MBB, IP, NEGTab[Class], 1, DestReg).addReg(op1Reg);
if (Class == cLong) {
// We just emitted: Dl = neg Sl
// Now emit : T = addc Sh, 0
// : Dh = neg T
unsigned T = makeAnotherReg(Type::IntTy);
BuildMI(*MBB, IP, X86::ADC32ri, 2, T).addReg(op1Reg+1).addImm(0);
BuildMI(*MBB, IP, X86::NEG32r, 1, DestReg+1).addReg(T);
}
return;
} else if (Op1->hasOneUse() && Class != cLong) {
// sub C, X -> tmp = neg X; DestReg = add tmp, C. This is better
// than copying C into a temporary register, because of register
// pressure (tmp and destreg can share a register.
static unsigned const ADDRITab[] = {
X86::ADD8ri, X86::ADD16ri, X86::ADD32ri, 0, X86::ADD32ri
};
unsigned op1Reg = getReg(Op1, MBB, IP);
unsigned Tmp = makeAnotherReg(Op0->getType());
BuildMI(*MBB, IP, NEGTab[Class], 1, Tmp).addReg(op1Reg);
BuildMI(*MBB, IP, ADDRITab[Class], 2,
DestReg).addReg(Tmp).addImm(CI->getRawValue());
return;
}
}
// Special case: op Reg, <const int>
if (ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) {
unsigned Op0r = getReg(Op0, MBB, IP);
// xor X, -1 -> not X
if (OperatorClass == 4 && Op1C->isAllOnesValue()) {
static unsigned const NOTTab[] = {
X86::NOT8r, X86::NOT16r, X86::NOT32r, 0, X86::NOT32r
};
BuildMI(*MBB, IP, NOTTab[Class], 1, DestReg).addReg(Op0r);
if (Class == cLong) // Invert the top part too
BuildMI(*MBB, IP, X86::NOT32r, 1, DestReg+1).addReg(Op0r+1);
return;
}
// add X, -1 -> dec X
if (OperatorClass == 0 && Op1C->isAllOnesValue() && Class != cLong) {
// Note that we can't use dec for 64-bit decrements, because it does not
// set the carry flag!
static unsigned const DECTab[] = { X86::DEC8r, X86::DEC16r, X86::DEC32r };
BuildMI(*MBB, IP, DECTab[Class], 1, DestReg).addReg(Op0r);
return;
}
// add X, 1 -> inc X
if (OperatorClass == 0 && Op1C->equalsInt(1) && Class != cLong) {
// Note that we can't use inc for 64-bit increments, because it does not
// set the carry flag!
static unsigned const INCTab[] = { X86::INC8r, X86::INC16r, X86::INC32r };
BuildMI(*MBB, IP, INCTab[Class], 1, DestReg).addReg(Op0r);
return;
}
static const unsigned OpcodeTab[][5] = {
// Arithmetic operators
{ X86::ADD8ri, X86::ADD16ri, X86::ADD32ri, 0, X86::ADD32ri }, // ADD
{ X86::SUB8ri, X86::SUB16ri, X86::SUB32ri, 0, X86::SUB32ri }, // SUB
// Bitwise operators
{ X86::AND8ri, X86::AND16ri, X86::AND32ri, 0, X86::AND32ri }, // AND
{ X86:: OR8ri, X86:: OR16ri, X86:: OR32ri, 0, X86::OR32ri }, // OR
{ X86::XOR8ri, X86::XOR16ri, X86::XOR32ri, 0, X86::XOR32ri }, // XOR
};
unsigned Opcode = OpcodeTab[OperatorClass][Class];
unsigned Op1l = cast<ConstantInt>(Op1C)->getRawValue();
if (Class != cLong) {
BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addImm(Op1l);
return;
}
// If this is a long value and the high or low bits have a special
// property, emit some special cases.
unsigned Op1h = cast<ConstantInt>(Op1C)->getRawValue() >> 32LL;
// If the constant is zero in the low 32-bits, just copy the low part
// across and apply the normal 32-bit operation to the high parts. There
// will be no carry or borrow into the top.
if (Op1l == 0) {
if (OperatorClass != 2) // All but and...
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0r);
else
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
BuildMI(*MBB, IP, OpcodeTab[OperatorClass][cLong], 2, DestReg+1)
.addReg(Op0r+1).addImm(Op1h);
return;
}
// If this is a logical operation and the top 32-bits are zero, just
// operate on the lower 32.
if (Op1h == 0 && OperatorClass > 1) {
BuildMI(*MBB, IP, OpcodeTab[OperatorClass][cLong], 2, DestReg)
.addReg(Op0r).addImm(Op1l);
if (OperatorClass != 2) // All but and
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(Op0r+1);
else
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
return;
}
// TODO: We could handle lots of other special cases here, such as AND'ing
// with 0xFFFFFFFF00000000 -> noop, etc.
// Otherwise, code generate the full operation with a constant.
static const unsigned TopTab[] = {
X86::ADC32ri, X86::SBB32ri, X86::AND32ri, X86::OR32ri, X86::XOR32ri
};
BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addImm(Op1l);
BuildMI(*MBB, IP, TopTab[OperatorClass], 2, DestReg+1)
.addReg(Op0r+1).addImm(Op1h);
return;
}
// Finally, handle the general case now.
static const unsigned OpcodeTab[][5] = {
// Arithmetic operators
{ X86::ADD8rr, X86::ADD16rr, X86::ADD32rr, 0, X86::ADD32rr }, // ADD
{ X86::SUB8rr, X86::SUB16rr, X86::SUB32rr, 0, X86::SUB32rr }, // SUB
// Bitwise operators
{ X86::AND8rr, X86::AND16rr, X86::AND32rr, 0, X86::AND32rr }, // AND
{ X86:: OR8rr, X86:: OR16rr, X86:: OR32rr, 0, X86:: OR32rr }, // OR
{ X86::XOR8rr, X86::XOR16rr, X86::XOR32rr, 0, X86::XOR32rr }, // XOR
};
unsigned Opcode = OpcodeTab[OperatorClass][Class];
unsigned Op0r = getReg(Op0, MBB, IP);
unsigned Op1r = getReg(Op1, MBB, IP);
BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addReg(Op1r);
if (Class == cLong) { // Handle the upper 32 bits of long values...
static const unsigned TopTab[] = {
X86::ADC32rr, X86::SBB32rr, X86::AND32rr, X86::OR32rr, X86::XOR32rr
};
BuildMI(*MBB, IP, TopTab[OperatorClass], 2,
DestReg+1).addReg(Op0r+1).addReg(Op1r+1);
}
}
/// doMultiply - Emit appropriate instructions to multiply together the
/// registers op0Reg and op1Reg, and put the result in DestReg. The type of the
/// result should be given as DestTy.
///
void X86ISel::doMultiply(MachineBasicBlock *MBB,
MachineBasicBlock::iterator MBBI,
unsigned DestReg, const Type *DestTy,
unsigned op0Reg, unsigned op1Reg) {
unsigned Class = getClass(DestTy);
switch (Class) {
case cInt:
case cShort:
BuildMI(*MBB, MBBI, Class == cInt ? X86::IMUL32rr:X86::IMUL16rr, 2, DestReg)
.addReg(op0Reg).addReg(op1Reg);
return;
case cByte:
// Must use the MUL instruction, which forces use of AL...
BuildMI(*MBB, MBBI, X86::MOV8rr, 1, X86::AL).addReg(op0Reg);
BuildMI(*MBB, MBBI, X86::MUL8r, 1).addReg(op1Reg);
BuildMI(*MBB, MBBI, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
return;
default:
case cLong: assert(0 && "doMultiply cannot operate on LONG values!");
}
}
// ExactLog2 - This function solves for (Val == 1 << (N-1)) and returns N. It
// returns zero when the input is not exactly a power of two.
static unsigned ExactLog2(unsigned Val) {
if (Val == 0 || (Val & (Val-1))) return 0;
unsigned Count = 0;
while (Val != 1) {
Val >>= 1;
++Count;
}
return Count+1;
}
/// doMultiplyConst - This function is specialized to efficiently codegen an 8,
/// 16, or 32-bit integer multiply by a constant.
void X86ISel::doMultiplyConst(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
unsigned DestReg, const Type *DestTy,
unsigned op0Reg, unsigned ConstRHS) {
static const unsigned MOVrrTab[] = {X86::MOV8rr, X86::MOV16rr, X86::MOV32rr};
static const unsigned MOVriTab[] = {X86::MOV8ri, X86::MOV16ri, X86::MOV32ri};
static const unsigned ADDrrTab[] = {X86::ADD8rr, X86::ADD16rr, X86::ADD32rr};
static const unsigned NEGrTab[] = {X86::NEG8r , X86::NEG16r , X86::NEG32r };
unsigned Class = getClass(DestTy);
unsigned TmpReg;
// Handle special cases here.
switch (ConstRHS) {
case -2:
TmpReg = makeAnotherReg(DestTy);
BuildMI(*MBB, IP, NEGrTab[Class], 1, TmpReg).addReg(op0Reg);
BuildMI(*MBB, IP, ADDrrTab[Class], 1,DestReg).addReg(TmpReg).addReg(TmpReg);
return;
case -1:
BuildMI(*MBB, IP, NEGrTab[Class], 1, DestReg).addReg(op0Reg);
return;
case 0:
BuildMI(*MBB, IP, MOVriTab[Class], 1, DestReg).addImm(0);
return;
case 1:
BuildMI(*MBB, IP, MOVrrTab[Class], 1, DestReg).addReg(op0Reg);
return;
case 2:
BuildMI(*MBB, IP, ADDrrTab[Class], 1,DestReg).addReg(op0Reg).addReg(op0Reg);
return;
case 3:
case 5:
case 9:
if (Class == cInt) {
X86AddressMode AM;
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = op0Reg;
AM.Scale = ConstRHS-1;
AM.IndexReg = op0Reg;
AM.Disp = 0;
addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, DestReg), AM);
return;
}
case -3:
case -5:
case -9:
if (Class == cInt) {
TmpReg = makeAnotherReg(DestTy);
X86AddressMode AM;
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = op0Reg;
AM.Scale = -ConstRHS-1;
AM.IndexReg = op0Reg;
AM.Disp = 0;
addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, TmpReg), AM);
BuildMI(*MBB, IP, NEGrTab[Class], 1, DestReg).addReg(TmpReg);
return;
}
}
// If the element size is exactly a power of 2, use a shift to get it.
if (unsigned Shift = ExactLog2(ConstRHS)) {
switch (Class) {
default: assert(0 && "Unknown class for this function!");
case cByte:
BuildMI(*MBB, IP, X86::SHL8ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
return;
case cShort:
BuildMI(*MBB, IP, X86::SHL16ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
return;
case cInt:
BuildMI(*MBB, IP, X86::SHL32ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
return;
}
}
// If the element size is a negative power of 2, use a shift/neg to get it.
if (unsigned Shift = ExactLog2(-ConstRHS)) {
TmpReg = makeAnotherReg(DestTy);
BuildMI(*MBB, IP, NEGrTab[Class], 1, TmpReg).addReg(op0Reg);
switch (Class) {
default: assert(0 && "Unknown class for this function!");
case cByte:
BuildMI(*MBB, IP, X86::SHL8ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
return;
case cShort:
BuildMI(*MBB, IP, X86::SHL16ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
return;
case cInt:
BuildMI(*MBB, IP, X86::SHL32ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
return;
}
}
if (Class == cShort) {
BuildMI(*MBB, IP, X86::IMUL16rri,2,DestReg).addReg(op0Reg).addImm(ConstRHS);
return;
} else if (Class == cInt) {
BuildMI(*MBB, IP, X86::IMUL32rri,2,DestReg).addReg(op0Reg).addImm(ConstRHS);
return;
}
// Most general case, emit a normal multiply...
TmpReg = makeAnotherReg(DestTy);
BuildMI(*MBB, IP, MOVriTab[Class], 1, TmpReg).addImm(ConstRHS);
// Emit a MUL to multiply the register holding the index by
// elementSize, putting the result in OffsetReg.
doMultiply(MBB, IP, DestReg, DestTy, op0Reg, TmpReg);
}
/// visitMul - Multiplies are not simple binary operators because they must deal
/// with the EAX register explicitly.
///
void X86ISel::visitMul(BinaryOperator &I) {
unsigned ResultReg = getReg(I);
Value *Op0 = I.getOperand(0);
Value *Op1 = I.getOperand(1);
// Fold loads into floating point multiplies.
if (getClass(Op0->getType()) == cFP) {
if (isa<LoadInst>(Op0) && !isa<LoadInst>(Op1))
if (!I.swapOperands())
std::swap(Op0, Op1); // Make sure any loads are in the RHS.
if (LoadInst *LI = dyn_cast<LoadInst>(Op1))
if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
const Type *Ty = Op0->getType();
assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = Ty == Type::FloatTy ? X86::FMUL32m : X86::FMUL64m;
unsigned Op0r = getReg(Op0);
if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), FI);
} else {
X86AddressMode AM;
getAddressingMode(LI->getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), AM);
}
return;
}
}
MachineBasicBlock::iterator IP = BB->end();
emitMultiply(BB, IP, Op0, Op1, ResultReg);
}
void X86ISel::emitMultiply(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, unsigned DestReg) {
MachineBasicBlock &BB = *MBB;
TypeClass Class = getClass(Op0->getType());
// Simple scalar multiply?
unsigned Op0Reg = getReg(Op0, &BB, IP);
switch (Class) {
case cByte:
case cShort:
case cInt:
if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
unsigned Val = (unsigned)CI->getRawValue(); // Isn't a 64-bit constant
doMultiplyConst(&BB, IP, DestReg, Op0->getType(), Op0Reg, Val);
} else {
unsigned Op1Reg = getReg(Op1, &BB, IP);
doMultiply(&BB, IP, DestReg, Op1->getType(), Op0Reg, Op1Reg);
}
return;
case cFP:
emitBinaryFPOperation(MBB, IP, Op0, Op1, 2, DestReg);
return;
case cLong:
break;
}
// Long value. We have to do things the hard way...
if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
unsigned CLow = CI->getRawValue();
unsigned CHi = CI->getRawValue() >> 32;
if (CLow == 0) {
// If the low part of the constant is all zeros, things are simple.
BuildMI(BB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
doMultiplyConst(&BB, IP, DestReg+1, Type::UIntTy, Op0Reg, CHi);
return;
}
// Multiply the two low parts... capturing carry into EDX
unsigned OverflowReg = 0;
if (CLow == 1) {
BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0Reg);
} else {
unsigned Op1RegL = makeAnotherReg(Type::UIntTy);
OverflowReg = makeAnotherReg(Type::UIntTy);
BuildMI(BB, IP, X86::MOV32ri, 1, Op1RegL).addImm(CLow);
BuildMI(BB, IP, X86::MOV32rr, 1, X86::EAX).addReg(Op0Reg);
BuildMI(BB, IP, X86::MUL32r, 1).addReg(Op1RegL); // AL*BL
BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(X86::EAX); // AL*BL
BuildMI(BB, IP, X86::MOV32rr, 1,
OverflowReg).addReg(X86::EDX); // AL*BL >> 32
}
unsigned AHBLReg = makeAnotherReg(Type::UIntTy); // AH*BL
doMultiplyConst(&BB, IP, AHBLReg, Type::UIntTy, Op0Reg+1, CLow);
unsigned AHBLplusOverflowReg;
if (OverflowReg) {
AHBLplusOverflowReg = makeAnotherReg(Type::UIntTy);
BuildMI(BB, IP, X86::ADD32rr, 2, // AH*BL+(AL*BL >> 32)
AHBLplusOverflowReg).addReg(AHBLReg).addReg(OverflowReg);
} else {
AHBLplusOverflowReg = AHBLReg;
}
if (CHi == 0) {
BuildMI(BB, IP, X86::MOV32rr, 1, DestReg+1).addReg(AHBLplusOverflowReg);
} else {
unsigned ALBHReg = makeAnotherReg(Type::UIntTy); // AL*BH
doMultiplyConst(&BB, IP, ALBHReg, Type::UIntTy, Op0Reg, CHi);
BuildMI(BB, IP, X86::ADD32rr, 2, // AL*BH + AH*BL + (AL*BL >> 32)
DestReg+1).addReg(AHBLplusOverflowReg).addReg(ALBHReg);
}
return;
}
// General 64x64 multiply
unsigned Op1Reg = getReg(Op1, &BB, IP);
// Multiply the two low parts... capturing carry into EDX
BuildMI(BB, IP, X86::MOV32rr, 1, X86::EAX).addReg(Op0Reg);
BuildMI(BB, IP, X86::MUL32r, 1).addReg(Op1Reg); // AL*BL
unsigned OverflowReg = makeAnotherReg(Type::UIntTy);
BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(X86::EAX); // AL*BL
BuildMI(BB, IP, X86::MOV32rr, 1,
OverflowReg).addReg(X86::EDX); // AL*BL >> 32
unsigned AHBLReg = makeAnotherReg(Type::UIntTy); // AH*BL
BuildMI(BB, IP, X86::IMUL32rr, 2,
AHBLReg).addReg(Op0Reg+1).addReg(Op1Reg);
unsigned AHBLplusOverflowReg = makeAnotherReg(Type::UIntTy);
BuildMI(BB, IP, X86::ADD32rr, 2, // AH*BL+(AL*BL >> 32)
AHBLplusOverflowReg).addReg(AHBLReg).addReg(OverflowReg);
unsigned ALBHReg = makeAnotherReg(Type::UIntTy); // AL*BH
BuildMI(BB, IP, X86::IMUL32rr, 2,
ALBHReg).addReg(Op0Reg).addReg(Op1Reg+1);
BuildMI(BB, IP, X86::ADD32rr, 2, // AL*BH + AH*BL + (AL*BL >> 32)
DestReg+1).addReg(AHBLplusOverflowReg).addReg(ALBHReg);
}
/// visitDivRem - Handle division and remainder instructions... these
/// instruction both require the same instructions to be generated, they just
/// select the result from a different register. Note that both of these
/// instructions work differently for signed and unsigned operands.
///
void X86ISel::visitDivRem(BinaryOperator &I) {
unsigned ResultReg = getReg(I);
Value *Op0 = I.getOperand(0), *Op1 = I.getOperand(1);
// Fold loads into floating point divides.
if (getClass(Op0->getType()) == cFP) {
if (LoadInst *LI = dyn_cast<LoadInst>(Op1))
if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
const Type *Ty = Op0->getType();
assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = Ty == Type::FloatTy ? X86::FDIV32m : X86::FDIV64m;
unsigned Op0r = getReg(Op0);
if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), FI);
} else {
X86AddressMode AM;
getAddressingMode(LI->getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), AM);
}
return;
}
if (LoadInst *LI = dyn_cast<LoadInst>(Op0))
if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
const Type *Ty = Op0->getType();
assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
unsigned Opcode = Ty == Type::FloatTy ? X86::FDIVR32m : X86::FDIVR64m;
unsigned Op1r = getReg(Op1);
if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op1r), FI);
} else {
X86AddressMode AM;
getAddressingMode(LI->getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op1r), AM);
}
return;
}
}
MachineBasicBlock::iterator IP = BB->end();
emitDivRemOperation(BB, IP, Op0, Op1,
I.getOpcode() == Instruction::Div, ResultReg);
}
void X86ISel::emitDivRemOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Op0, Value *Op1, bool isDiv,
unsigned ResultReg) {
const Type *Ty = Op0->getType();
unsigned Class = getClass(Ty);
switch (Class) {
case cFP: // Floating point divide
if (isDiv) {
emitBinaryFPOperation(BB, IP, Op0, Op1, 3, ResultReg);
return;
} else { // Floating point remainder...
unsigned Op0Reg = getReg(Op0, BB, IP);
unsigned Op1Reg = getReg(Op1, BB, IP);
MachineInstr *TheCall =
BuildMI(X86::CALLpcrel32, 1).addExternalSymbol("fmod", true);
std::vector<ValueRecord> Args;
Args.push_back(ValueRecord(Op0Reg, Type::DoubleTy));
Args.push_back(ValueRecord(Op1Reg, Type::DoubleTy));
doCall(ValueRecord(ResultReg, Type::DoubleTy), TheCall, Args);
}
return;
case cLong: {
static const char *FnName[] =
{ "__moddi3", "__divdi3", "__umoddi3", "__udivdi3" };
unsigned Op0Reg = getReg(Op0, BB, IP);
unsigned Op1Reg = getReg(Op1, BB, IP);
unsigned NameIdx = Ty->isUnsigned()*2 + isDiv;
MachineInstr *TheCall =
BuildMI(X86::CALLpcrel32, 1).addExternalSymbol(FnName[NameIdx], true);
std::vector<ValueRecord> Args;
Args.push_back(ValueRecord(Op0Reg, Type::LongTy));
Args.push_back(ValueRecord(Op1Reg, Type::LongTy));
doCall(ValueRecord(ResultReg, Type::LongTy), TheCall, Args);
return;
}
case cByte: case cShort: case cInt:
break; // Small integrals, handled below...
default: assert(0 && "Unknown class!");
}
static const unsigned MovOpcode[]={ X86::MOV8rr, X86::MOV16rr, X86::MOV32rr };
static const unsigned NEGOpcode[]={ X86::NEG8r, X86::NEG16r, X86::NEG32r };
static const unsigned SAROpcode[]={ X86::SAR8ri, X86::SAR16ri, X86::SAR32ri };
static const unsigned SHROpcode[]={ X86::SHR8ri, X86::SHR16ri, X86::SHR32ri };
static const unsigned ADDOpcode[]={ X86::ADD8rr, X86::ADD16rr, X86::ADD32rr };
// Special case signed division by power of 2.
if (ConstantSInt *CI = dyn_cast<ConstantSInt>(Op1))
if (isDiv) {
assert(Class != cLong && "This doesn't handle 64-bit divides!");
int V = CI->getValue();
if (V == 1) { // X /s 1 => X
unsigned Op0Reg = getReg(Op0, BB, IP);
BuildMI(*BB, IP, MovOpcode[Class], 1, ResultReg).addReg(Op0Reg);
return;
}
if (V == -1) { // X /s -1 => -X
unsigned Op0Reg = getReg(Op0, BB, IP);
BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(Op0Reg);
return;
}
if (V == 2 || V == -2) { // X /s 2
static const unsigned CMPOpcode[] = {
X86::CMP8ri, X86::CMP16ri, X86::CMP32ri
};
static const unsigned SBBOpcode[] = {
X86::SBB8ri, X86::SBB16ri, X86::SBB32ri
};
unsigned Op0Reg = getReg(Op0, BB, IP);
unsigned SignBit = 1 << (CI->getType()->getPrimitiveSize()*8-1);
BuildMI(*BB, IP, CMPOpcode[Class], 2).addReg(Op0Reg).addImm(SignBit);
unsigned TmpReg = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, SBBOpcode[Class], 2, TmpReg).addReg(Op0Reg).addImm(-1);
unsigned TmpReg2 = V == 2 ? ResultReg : makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg2).addReg(TmpReg).addImm(1);
if (V == -2) {
BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(TmpReg2);
}
return;
}
bool isNeg = false;
if (V < 0) { // Not a positive power of 2?
V = -V;
isNeg = true; // Maybe it's a negative power of 2.
}
if (unsigned Log = ExactLog2(V)) {
--Log;
unsigned Op0Reg = getReg(Op0, BB, IP);
unsigned TmpReg = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg)
.addReg(Op0Reg).addImm(Log-1);
unsigned TmpReg2 = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, SHROpcode[Class], 2, TmpReg2)
.addReg(TmpReg).addImm(32-Log);
unsigned TmpReg3 = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, ADDOpcode[Class], 2, TmpReg3)
.addReg(Op0Reg).addReg(TmpReg2);
unsigned TmpReg4 = isNeg ? makeAnotherReg(Op0->getType()) : ResultReg;
BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg4)
.addReg(TmpReg3).addImm(Log);
if (isNeg)
BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(TmpReg4);
return;
}
} else { // X % C
assert(Class != cLong && "This doesn't handle 64-bit remainder!");
int V = CI->getValue();
if (V == 2 || V == -2) { // X % 2, X % -2
static const unsigned SExtOpcode[] = { X86::CBW, X86::CWD, X86::CDQ };
static const unsigned BaseReg[] = { X86::AL , X86::AX , X86::EAX };
static const unsigned SExtReg[] = { X86::AH , X86::DX , X86::EDX };
static const unsigned ANDOpcode[] = {
X86::AND8ri, X86::AND16ri, X86::AND32ri
};
static const unsigned XOROpcode[] = {
X86::XOR8rr, X86::XOR16rr, X86::XOR32rr
};
static const unsigned SUBOpcode[] = {
X86::SUB8rr, X86::SUB16rr, X86::SUB32rr
};
// Sign extend result into reg of -1 or 0.
unsigned Op0Reg = getReg(Op0, BB, IP);
BuildMI(*BB, IP, MovOpcode[Class], 1, BaseReg[Class]).addReg(Op0Reg);
BuildMI(*BB, IP, SExtOpcode[Class], 0);
unsigned TmpReg0 = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, MovOpcode[Class], 1, TmpReg0).addReg(SExtReg[Class]);
unsigned TmpReg1 = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, ANDOpcode[Class], 2, TmpReg1).addReg(Op0Reg).addImm(1);
unsigned TmpReg2 = makeAnotherReg(Op0->getType());
BuildMI(*BB, IP, XOROpcode[Class], 2,
TmpReg2).addReg(TmpReg1).addReg(TmpReg0);
BuildMI(*BB, IP, SUBOpcode[Class], 2,
ResultReg).addReg(TmpReg2).addReg(TmpReg0);
return;
}
}
static const unsigned Regs[] ={ X86::AL , X86::AX , X86::EAX };
static const unsigned ClrOpcode[]={ X86::MOV8ri, X86::MOV16ri, X86::MOV32ri };
static const unsigned ExtRegs[] ={ X86::AH , X86::DX , X86::EDX };
static const unsigned SExOpcode[]={ X86::CBW , X86::CWD , X86::CDQ };
static const unsigned DivOpcode[][4] = {
{ X86::DIV8r , X86::DIV16r , X86::DIV32r , 0 }, // Unsigned division
{ X86::IDIV8r, X86::IDIV16r, X86::IDIV32r, 0 }, // Signed division
};
unsigned Reg = Regs[Class];
unsigned ExtReg = ExtRegs[Class];
// Put the first operand into one of the A registers...
unsigned Op0Reg = getReg(Op0, BB, IP);
unsigned Op1Reg = getReg(Op1, BB, IP);
BuildMI(*BB, IP, MovOpcode[Class], 1, Reg).addReg(Op0Reg);
if (Ty->isSigned()) {
// Emit a sign extension instruction.
BuildMI(*BB, IP, SExOpcode[Class], 0);
// Emit the appropriate divide or remainder instruction...
BuildMI(*BB, IP, DivOpcode[1][Class], 1).addReg(Op1Reg);
} else {
// If unsigned, emit a zeroing instruction... (reg = 0)
BuildMI(*BB, IP, ClrOpcode[Class], 2, ExtReg).addImm(0);
// Emit the appropriate divide or remainder instruction...
BuildMI(*BB, IP, DivOpcode[0][Class], 1).addReg(Op1Reg);
}
// Figure out which register we want to pick the result out of...
unsigned DestReg = isDiv ? Reg : ExtReg;
// Put the result into the destination register...
BuildMI(*BB, IP, MovOpcode[Class], 1, ResultReg).addReg(DestReg);
}
/// Shift instructions: 'shl', 'sar', 'shr' - Some special cases here
/// for constant immediate shift values, and for constant immediate
/// shift values equal to 1. Even the general case is sort of special,
/// because the shift amount has to be in CL, not just any old register.
///
void X86ISel::visitShiftInst(ShiftInst &I) {
MachineBasicBlock::iterator IP = BB->end ();
emitShiftOperation (BB, IP, I.getOperand (0), I.getOperand (1),
I.getOpcode () == Instruction::Shl, I.getType (),
getReg (I));
}
/// Emit code for a 'SHLD DestReg, Op0, Op1, Amt' operation, where Amt is a
/// constant.
void X86ISel::doSHLDConst(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
unsigned DestReg, unsigned Op0Reg, unsigned Op1Reg,
unsigned Amt) {
// SHLD is a very inefficient operation on every processor, try to do
// somethign simpler for common values of 'Amt'.
if (Amt == 0) {
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0Reg);
} else if (Amt == 1) {
unsigned Tmp = makeAnotherReg(Type::UIntTy);
BuildMI(*MBB, IP, X86::ADD32rr, 2, Tmp).addReg(Op1Reg).addReg(Op1Reg);
BuildMI(*MBB, IP, X86::ADC32rr, 2, DestReg).addReg(Op0Reg).addReg(Op0Reg);
} else if (Amt == 2 || Amt == 3) {
// On the P4 and Athlon it is cheaper to replace shld ..., 2|3 with a
// shift/lea pair. NOTE: This should not be done on the P6 family!
unsigned Tmp = makeAnotherReg(Type::UIntTy);
BuildMI(*MBB, IP, X86::SHR32ri, 2, Tmp).addReg(Op1Reg).addImm(32-Amt);
X86AddressMode AM;
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = Tmp;
AM.Scale = 1 << Amt;
AM.IndexReg = Op0Reg;
AM.Disp = 0;
addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 4, DestReg), AM);
} else {
// NOTE: It is always cheaper on the P4 to emit SHLD as two shifts and an OR
// than it is to emit a real SHLD.
BuildMI(*MBB, IP, X86::SHLD32rri8, 3,
DestReg).addReg(Op0Reg).addReg(Op1Reg).addImm(Amt);
}
}
/// emitShiftOperation - Common code shared between visitShiftInst and
/// constant expression support.
void X86ISel::emitShiftOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Op, Value *ShiftAmount,
bool isLeftShift, const Type *ResultTy,
unsigned DestReg) {
unsigned SrcReg = getReg (Op, MBB, IP);
bool isSigned = ResultTy->isSigned ();
unsigned Class = getClass (ResultTy);
static const unsigned ConstantOperand[][3] = {
{ X86::SHR8ri, X86::SHR16ri, X86::SHR32ri }, // SHR
{ X86::SAR8ri, X86::SAR16ri, X86::SAR32ri }, // SAR
{ X86::SHL8ri, X86::SHL16ri, X86::SHL32ri }, // SHL
{ X86::SHL8ri, X86::SHL16ri, X86::SHL32ri }, // SAL = SHL
};
static const unsigned NonConstantOperand[][3] = {
{ X86::SHR8rCL, X86::SHR16rCL, X86::SHR32rCL }, // SHR
{ X86::SAR8rCL, X86::SAR16rCL, X86::SAR32rCL }, // SAR
{ X86::SHL8rCL, X86::SHL16rCL, X86::SHL32rCL }, // SHL
{ X86::SHL8rCL, X86::SHL16rCL, X86::SHL32rCL }, // SAL = SHL
};
// Longs, as usual, are handled specially.
if (Class == cLong) {
if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(ShiftAmount)) {
unsigned Amount = CUI->getValue();
if (Amount == 1 && isLeftShift) { // X << 1 == X+X
BuildMI(*MBB, IP, X86::ADD32rr, 2,
DestReg).addReg(SrcReg).addReg(SrcReg);
BuildMI(*MBB, IP, X86::ADC32rr, 2,
DestReg+1).addReg(SrcReg+1).addReg(SrcReg+1);
} else if (Amount < 32) {
const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
if (isLeftShift) {
doSHLDConst(MBB, IP, DestReg+1, SrcReg+1, SrcReg, Amount);
BuildMI(*MBB, IP, Opc[2], 2, DestReg).addReg(SrcReg).addImm(Amount);
} else {
BuildMI(*MBB, IP, X86::SHRD32rri8, 3,
DestReg).addReg(SrcReg ).addReg(SrcReg+1).addImm(Amount);
BuildMI(*MBB, IP, Opc[2],2,DestReg+1).addReg(SrcReg+1).addImm(Amount);
}
} else if (Amount == 32) {
if (isLeftShift) {
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(SrcReg);
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
} else {
BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg+1);
if (!isSigned) {
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
} else {
BuildMI(*MBB, IP, X86::SAR32ri, 2,
DestReg+1).addReg(SrcReg).addImm(31);
}
}
} else { // Shifting more than 32 bits
Amount -= 32;
if (isLeftShift) {
BuildMI(*MBB, IP, X86::SHL32ri, 2,
DestReg + 1).addReg(SrcReg).addImm(Amount);
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
} else {
BuildMI(*MBB, IP, isSigned ? X86::SAR32ri : X86::SHR32ri, 2,
DestReg).addReg(SrcReg+1).addImm(Amount);
BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
}
}
} else {
unsigned TmpReg = makeAnotherReg(Type::IntTy);
if (!isLeftShift && isSigned) {
// If this is a SHR of a Long, then we need to do funny sign extension
// stuff. TmpReg gets the value to use as the high-part if we are
// shifting more than 32 bits.
BuildMI(*MBB, IP, X86::SAR32ri, 2, TmpReg).addReg(SrcReg).addImm(31);
} else {
// Other shifts use a fixed zero value if the shift is more than 32
// bits.
BuildMI(*MBB, IP, X86::MOV32ri, 1, TmpReg).addImm(0);
}
// Initialize CL with the shift amount...
unsigned ShiftAmountReg = getReg(ShiftAmount, MBB, IP);
BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(ShiftAmountReg);
unsigned TmpReg2 = makeAnotherReg(Type::IntTy);
unsigned TmpReg3 = makeAnotherReg(Type::IntTy);
if (isLeftShift) {
// TmpReg2 = shld inHi, inLo
BuildMI(*MBB, IP, X86::SHLD32rrCL,2,TmpReg2).addReg(SrcReg+1)
.addReg(SrcReg);
// TmpReg3 = shl inLo, CL
BuildMI(*MBB, IP, X86::SHL32rCL, 1, TmpReg3).addReg(SrcReg);
// Set the flags to indicate whether the shift was by more than 32 bits.
BuildMI(*MBB, IP, X86::TEST8ri, 2).addReg(X86::CL).addImm(32);
// DestHi = (>32) ? TmpReg3 : TmpReg2;
BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
DestReg+1).addReg(TmpReg2).addReg(TmpReg3);
// DestLo = (>32) ? TmpReg : TmpReg3;
BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
DestReg).addReg(TmpReg3).addReg(TmpReg);
} else {
// TmpReg2 = shrd inLo, inHi
BuildMI(*MBB, IP, X86::SHRD32rrCL,2,TmpReg2).addReg(SrcReg)
.addReg(SrcReg+1);
// TmpReg3 = s[ah]r inHi, CL
BuildMI(*MBB, IP, isSigned ? X86::SAR32rCL : X86::SHR32rCL, 1, TmpReg3)
.addReg(SrcReg+1);
// Set the flags to indicate whether the shift was by more than 32 bits.
BuildMI(*MBB, IP, X86::TEST8ri, 2).addReg(X86::CL).addImm(32);
// DestLo = (>32) ? TmpReg3 : TmpReg2;
BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
DestReg).addReg(TmpReg2).addReg(TmpReg3);
// DestHi = (>32) ? TmpReg : TmpReg3;
BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
DestReg+1).addReg(TmpReg3).addReg(TmpReg);
}
}
return;
}
if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(ShiftAmount)) {
// The shift amount is constant, guaranteed to be a ubyte. Get its value.
assert(CUI->getType() == Type::UByteTy && "Shift amount not a ubyte?");
if (CUI->getValue() == 1 && isLeftShift) { // X << 1 -> X+X
static const int AddOpC[] = { X86::ADD8rr, X86::ADD16rr, X86::ADD32rr };
BuildMI(*MBB, IP, AddOpC[Class], 2,DestReg).addReg(SrcReg).addReg(SrcReg);
} else {
const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
BuildMI(*MBB, IP, Opc[Class], 2,
DestReg).addReg(SrcReg).addImm(CUI->getValue());
}
} else { // The shift amount is non-constant.
unsigned ShiftAmountReg = getReg (ShiftAmount, MBB, IP);
BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(ShiftAmountReg);
const unsigned *Opc = NonConstantOperand[isLeftShift*2+isSigned];
BuildMI(*MBB, IP, Opc[Class], 1, DestReg).addReg(SrcReg);
}
}
/// visitLoadInst - Implement LLVM load instructions in terms of the x86 'mov'
/// instruction. The load and store instructions are the only place where we
/// need to worry about the memory layout of the target machine.
///
void X86ISel::visitLoadInst(LoadInst &I) {
// Check to see if this load instruction is going to be folded into a binary
// instruction, like add. If so, we don't want to emit it. Wouldn't a real
// pattern matching instruction selector be nice?
unsigned Class = getClassB(I.getType());
if (I.hasOneUse()) {
Instruction *User = cast<Instruction>(I.use_back());
switch (User->getOpcode()) {
case Instruction::Cast:
// If this is a cast from a signed-integer type to a floating point type,
// fold the cast here.
if (getClassB(User->getType()) == cFP &&
(I.getType() == Type::ShortTy || I.getType() == Type::IntTy ||
I.getType() == Type::LongTy)) {
unsigned DestReg = getReg(User);
static const unsigned Opcode[] = {
0/*BYTE*/, X86::FILD16m, X86::FILD32m, 0/*FP*/, X86::FILD64m
};
if (AllocaInst *AI = dyn_castFixedAlloca(I.getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
addFrameReference(BuildMI(BB, Opcode[Class], 4, DestReg), FI);
} else {
X86AddressMode AM;
getAddressingMode(I.getOperand(0), AM);
addFullAddress(BuildMI(BB, Opcode[Class], 4, DestReg), AM);
}
return;
} else {
User = 0;
}
break;
case Instruction::Add:
case Instruction::Sub:
case Instruction::And:
case Instruction::Or:
case Instruction::Xor:
if (Class == cLong) User = 0;
break;
case Instruction::Mul:
case Instruction::Div:
if (Class != cFP) User = 0;
break; // Folding only implemented for floating point.
default: User = 0; break;
}
if (User) {
// Okay, we found a user. If the load is the first operand and there is
// no second operand load, reverse the operand ordering. Note that this
// can fail for a subtract (ie, no change will be made).
bool Swapped = false;
if (!isa<LoadInst>(User->getOperand(1)))
Swapped = !cast<BinaryOperator>(User)->swapOperands();
// Okay, now that everything is set up, if this load is used by the second
// operand, and if there are no instructions that invalidate the load
// before the binary operator, eliminate the load.
if (User->getOperand(1) == &I &&
isSafeToFoldLoadIntoInstruction(I, *User))
return; // Eliminate the load!
// If this is a floating point sub or div, we won't be able to swap the
// operands, but we will still be able to eliminate the load.
if (Class == cFP && User->getOperand(0) == &I &&
!isa<LoadInst>(User->getOperand(1)) &&
(User->getOpcode() == Instruction::Sub ||
User->getOpcode() == Instruction::Div) &&
isSafeToFoldLoadIntoInstruction(I, *User))
return; // Eliminate the load!
// If we swapped the operands to the instruction, but couldn't fold the
// load anyway, swap them back. We don't want to break add X, int
// folding.
if (Swapped) cast<BinaryOperator>(User)->swapOperands();
}
}
static const unsigned Opcodes[] = {
X86::MOV8rm, X86::MOV16rm, X86::MOV32rm, X86::FLD32m, X86::MOV32rm
};
unsigned Opcode = Opcodes[Class];
if (I.getType() == Type::DoubleTy) Opcode = X86::FLD64m;
unsigned DestReg = getReg(I);
if (AllocaInst *AI = dyn_castFixedAlloca(I.getOperand(0))) {
unsigned FI = getFixedSizedAllocaFI(AI);
if (Class == cLong) {
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, DestReg), FI);
addFrameReference(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), FI, 4);
} else {
addFrameReference(BuildMI(BB, Opcode, 4, DestReg), FI);
}
} else {
X86AddressMode AM;
getAddressingMode(I.getOperand(0), AM);
if (Class == cLong) {
addFullAddress(BuildMI(BB, X86::MOV32rm, 4, DestReg), AM);
AM.Disp += 4;
addFullAddress(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), AM);
} else {
addFullAddress(BuildMI(BB, Opcode, 4, DestReg), AM);
}
}
}
/// visitStoreInst - Implement LLVM store instructions in terms of the x86 'mov'
/// instruction.
///
void X86ISel::visitStoreInst(StoreInst &I) {
X86AddressMode AM;
getAddressingMode(I.getOperand(1), AM);
const Type *ValTy = I.getOperand(0)->getType();
unsigned Class = getClassB(ValTy);
if (ConstantInt *CI = dyn_cast<ConstantInt>(I.getOperand(0))) {
uint64_t Val = CI->getRawValue();
if (Class == cLong) {
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(Val & ~0U);
AM.Disp += 4;
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(Val>>32);
} else {
static const unsigned Opcodes[] = {
X86::MOV8mi, X86::MOV16mi, X86::MOV32mi
};
unsigned Opcode = Opcodes[Class];
addFullAddress(BuildMI(BB, Opcode, 5), AM).addImm(Val);
}
} else if (isa<ConstantPointerNull>(I.getOperand(0))) {
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(0);
} else if (ConstantBool *CB = dyn_cast<ConstantBool>(I.getOperand(0))) {
addFullAddress(BuildMI(BB, X86::MOV8mi, 5), AM).addImm(CB->getValue());
} else if (ConstantFP *CFP = dyn_cast<ConstantFP>(I.getOperand(0))) {
// Store constant FP values with integer instructions to avoid having to
// load the constants from the constant pool then do a store.
if (CFP->getType() == Type::FloatTy) {
union {
unsigned I;
float F;
} V;
V.F = CFP->getValue();
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(V.I);
} else {
union {
uint64_t I;
double F;
} V;
V.F = CFP->getValue();
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm((unsigned)V.I);
AM.Disp += 4;
addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(
unsigned(V.I >> 32));
}
} else if (Class == cLong) {
unsigned ValReg = getReg(I.getOperand(0));
addFullAddress(BuildMI(BB, X86::MOV32mr, 5), AM).addReg(ValReg);
AM.Disp += 4;
addFullAddress(BuildMI(BB, X86::MOV32mr, 5), AM).addReg(ValReg+1);
} else {
// FIXME: stop emitting these two instructions:
// movl $global,%eax
// movl %eax,(%ebx)
// when one instruction will suffice. That includes when the global
// has an offset applied to it.
unsigned ValReg = getReg(I.getOperand(0));
static const unsigned Opcodes[] = {
X86::MOV8mr, X86::MOV16mr, X86::MOV32mr, X86::FST32m
};
unsigned Opcode = Opcodes[Class];
if (ValTy == Type::DoubleTy) Opcode = X86::FST64m;
addFullAddress(BuildMI(BB, Opcode, 1+4), AM).addReg(ValReg);
}
}
/// visitCastInst - Here we have various kinds of copying with or without sign
/// extension going on.
///
void X86ISel::visitCastInst(CastInst &CI) {
Value *Op = CI.getOperand(0);
unsigned SrcClass = getClassB(Op->getType());
unsigned DestClass = getClassB(CI.getType());
// Noop casts are not emitted: getReg will return the source operand as the
// register to use for any uses of the noop cast.
if (DestClass == SrcClass) {
// The only detail in this plan is that casts from double -> float are
// truncating operations that we have to codegen through memory (despite
// the fact that the source/dest registers are the same class).
if (CI.getType() != Type::FloatTy || Op->getType() != Type::DoubleTy)
return;
}
// If this is a cast from a 32-bit integer to a Long type, and the only uses
// of the case are GEP instructions, then the cast does not need to be
// generated explicitly, it will be folded into the GEP.
if (DestClass == cLong && SrcClass == cInt) {
bool AllUsesAreGEPs = true;
for (Value::use_iterator I = CI.use_begin(), E = CI.use_end(); I != E; ++I)
if (!isa<GetElementPtrInst>(*I)) {
AllUsesAreGEPs = false;
break;
}
// No need to codegen this cast if all users are getelementptr instrs...
if (AllUsesAreGEPs) return;
}
// If this cast converts a load from a short,int, or long integer to a FP
// value, we will have folded this cast away.
if (DestClass == cFP && isa<LoadInst>(Op) && Op->hasOneUse() &&
(Op->getType() == Type::ShortTy || Op->getType() == Type::IntTy ||
Op->getType() == Type::LongTy))
return;
unsigned DestReg = getReg(CI);
MachineBasicBlock::iterator MI = BB->end();
emitCastOperation(BB, MI, Op, CI.getType(), DestReg);
}
/// emitCastOperation - Common code shared between visitCastInst and constant
/// expression cast support.
///
void X86ISel::emitCastOperation(MachineBasicBlock *BB,
MachineBasicBlock::iterator IP,
Value *Src, const Type *DestTy,
unsigned DestReg) {
const Type *SrcTy = Src->getType();
unsigned SrcClass = getClassB(SrcTy);
unsigned DestClass = getClassB(DestTy);
unsigned SrcReg = getReg(Src, BB, IP);
// Implement casts to bool by using compare on the operand followed by set if
// not zero on the result.
if (DestTy == Type::BoolTy) {
switch (SrcClass) {
case cByte:
BuildMI(*BB, IP, X86::TEST8rr, 2).addReg(SrcReg).addReg(SrcReg);
break;
case cShort:
BuildMI(*BB, IP, X86::TEST16rr, 2).addReg(SrcReg).addReg(SrcReg);
break;
case cInt:
BuildMI(*BB, IP, X86::TEST32rr, 2).addReg(SrcReg).addReg(SrcReg);
break;
case cLong: {
unsigned TmpReg = makeAnotherReg(Type::IntTy);
BuildMI(*BB, IP, X86::OR32rr, 2, TmpReg).addReg(SrcReg).addReg(SrcReg+1);
break;
}
case cFP:
BuildMI(*BB, IP, X86::FTST, 1).addReg(SrcReg);
BuildMI(*BB, IP, X86::FNSTSW8r, 0);
BuildMI(*BB, IP, X86::SAHF, 1);
break;
}
// If the zero flag is not set, then the value is true, set the byte to
// true.
BuildMI(*BB, IP, X86::SETNEr, 1, DestReg);
return;
}
static const unsigned RegRegMove[] = {
X86::MOV8rr, X86::MOV16rr, X86::MOV32rr, X86::FpMOV, X86::MOV32rr
};
// Implement casts between values of the same type class (as determined by
// getClass) by using a register-to-register move.
if (SrcClass == DestClass) {
if (SrcClass <= cInt || (SrcClass == cFP && SrcTy == DestTy)) {
BuildMI(*BB, IP, RegRegMove[SrcClass], 1, DestReg).addReg(SrcReg);
} else if (SrcClass == cFP) {
if (SrcTy == Type::FloatTy) { // double -> float
assert(DestTy == Type::DoubleTy && "Unknown cFP member!");
BuildMI(*BB, IP, X86::FpMOV, 1, DestReg).addReg(SrcReg);
} else { // float -> double
assert(SrcTy == Type::DoubleTy && DestTy == Type::FloatTy &&
"Unknown cFP member!");
// Truncate from double to float by storing to memory as short, then
// reading it back.
unsigned FltAlign = TM.getTargetData().getFloatAlignment();
int FrameIdx = F->getFrameInfo()->CreateStackObject(4, FltAlign);
addFrameReference(BuildMI(*BB, IP, X86::FST32m, 5),
FrameIdx).addReg(SrcReg);
addFrameReference(BuildMI(*BB, IP, X86::FLD32m, 5, DestReg), FrameIdx);
}
} else if (SrcClass == cLong) {
BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg);
BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg+1).addReg(SrcReg+1);
} else {
assert(0 && "Cannot handle this type of cast instruction!");
abort();
}
return;
}
// Handle cast of SMALLER int to LARGER int using a move with sign extension
// or zero extension, depending on whether the source type was signed.
if (SrcClass <= cInt && (DestClass <= cInt || DestClass == cLong) &&
SrcClass < DestClass) {
bool isLong = DestClass == cLong;
if (isLong) DestClass = cInt;
static const unsigned Opc[][4] = {
{ X86::MOVSX16rr8, X86::MOVSX32rr8, X86::MOVSX32rr16, X86::MOV32rr }, // s
{ X86::MOVZX16rr8, X86::MOVZX32rr8, X86::MOVZX32rr16, X86::MOV32rr } // u
};
bool isUnsigned = SrcTy->isUnsigned() || SrcTy == Type::BoolTy;
BuildMI(*BB, IP, Opc[isUnsigned][SrcClass + DestClass - 1], 1,
DestReg).addReg(SrcReg);
if (isLong) { // Handle upper 32 bits as appropriate...
if (isUnsigned) // Zero out top bits...
BuildMI(*BB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
else // Sign extend bottom half...
BuildMI(*BB, IP, X86::SAR32ri, 2, DestReg+1).addReg(DestReg).addImm(31);
}
return;
}
// Special case long -> int ...
if (SrcClass == cLong && DestClass == cInt) {
BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg);
return;
}
// Handle cast of LARGER int to SMALLER int using a move to EAX followed by a
// move out of AX or AL.
if ((SrcClass <= cInt || SrcClass == cLong) && DestClass <= cInt
&& SrcClass > DestClass) {
static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX, 0, X86::EAX };
BuildMI(*BB, IP, RegRegMove[SrcClass], 1, AReg[SrcClass]).addReg(SrcReg);
BuildMI(*BB, IP, RegRegMove[DestClass], 1, DestReg).addReg(AReg[DestClass]);
return;
}
// Handle casts from integer to floating point now...
if (DestClass == cFP) {
// Promote the integer to a type supported by FLD. We do this because there
// are no unsigned FLD instructions, so we must promote an unsigned value to
// a larger signed value, then use FLD on the larger value.
//
const Type *PromoteType = 0;
unsigned PromoteOpcode = 0;
unsigned RealDestReg = DestReg;
switch (SrcTy->getTypeID()) {
case Type::BoolTyID:
case Type::SByteTyID:
// We don't have the facilities for directly loading byte sized data from
// memory (even signed). Promote it to 16 bits.
PromoteType = Type::ShortTy;
PromoteOpcode = X86::MOVSX16rr8;
break;
case Type::UByteTyID:
PromoteType = Type::ShortTy;
PromoteOpcode = X86::MOVZX16rr8;
break;
case Type::UShortTyID:
PromoteType = Type::IntTy;
PromoteOpcode = X86::MOVZX32rr16;
break;
case Type::ULongTyID:
case Type::UIntTyID:
// Don't fild into the read destination.
DestReg = makeAnotherReg(Type::DoubleTy);
break;
default: // No promotion needed...
break;
}
if (PromoteType) {
unsigned TmpReg = makeAnotherReg(PromoteType);
BuildMI(*BB, IP, PromoteOpcode, 1, TmpReg).addReg(SrcReg);
SrcTy = PromoteType;
SrcClass = getClass(PromoteType);
SrcReg = TmpReg;
}
// Spill the integer to memory and reload it from there...
int FrameIdx =
F->getFrameInfo()->CreateStackObject(SrcTy, TM.getTargetData());
if (SrcClass == cLong) {
addFrameReference(BuildMI(*BB, IP, X86::MOV32mr, 5),
FrameIdx).addReg(SrcReg);
addFrameReference(BuildMI(*BB, IP, X86::MOV32mr, 5),
FrameIdx, 4).addReg(SrcReg+1);
} else {
static const unsigned Op1[] = { X86::MOV8mr, X86::MOV16mr, X86::MOV32mr };
addFrameReference(BuildMI(*BB, IP, Op1[SrcClass], 5),
FrameIdx).addReg(SrcReg);
}
static const unsigned Op2[] =
{ 0/*byte*/, X86::FILD16m, X86::FILD32m, 0/*FP*/, X86::FILD64m };
addFrameReference(BuildMI(*BB, IP, Op2[SrcClass], 5, DestReg), FrameIdx);
if (SrcTy == Type::UIntTy) {
// If this is a cast from uint -> double, we need to be careful about if
// the "sign" bit is set. If so, we don't want to make a negative number,
// we want to make a positive number. Emit code to add an offset if the
// sign bit is set.
// Compute whether the sign bit is set by shifting the reg right 31 bits.
unsigned IsNeg = makeAnotherReg(Type::IntTy);
BuildMI(*BB, IP, X86::SHR32ri, 2, IsNeg).addReg(SrcReg).addImm(31);
// Create a CP value that has the offset in one word and 0 in the other.
static ConstantInt *TheOffset = ConstantUInt::get(Type::ULongTy,
0x4f80000000000000ULL);
unsigned CPI = F->getConstantPool()->getConstantPoolIndex(TheOffset);
BuildMI(*BB, IP, X86::FADD32m, 5, RealDestReg).addReg(DestReg)
.addConstantPoolIndex(CPI).addZImm(4).addReg(IsNeg).addSImm(0);
} else if (SrcTy == Type::ULongTy) {
// We need special handling for unsigned 64-bit integer sources. If the
// input number has the "sign bit" set, then we loaded it incorrectly as a
// negative 64-bit number. In this case, add an offset value.
// Emit a test instruction to see if the dynamic input value was signed.
BuildMI(*BB, IP, X86::TEST32rr, 2).addReg(SrcReg+1).addReg(SrcReg+1);
// If the sign bit is set, get a pointer to an offset, otherwise get a
// pointer to a zero.
MachineConstantPool *CP = F->getConstantPool();
unsigned Zero = makeAnotherReg(Type::IntTy);
Constant *Null = Constant::getNullValue(Type::UIntTy);
addConstantPoolReference(BuildMI(*BB, IP, X86::LEA32r, 5, Zero),
CP->getConstantPoolIndex(Null));
unsigned Offset = makeAnotherReg(Type::IntTy);
Constant *OffsetCst = ConstantUInt::get(Type::UIntTy, 0x5f800000);
addConstantPoolReference(BuildMI(*BB, IP, X86::LEA32r, 5, Offset),
CP->getConstantPoolIndex(OffsetCst));
unsigned Addr = makeAnotherReg(Type::IntTy);
BuildMI(*BB, IP, X86::CMOVS32rr, 2, Addr).addReg(Zero).addReg(Offset);
// Load the constant for an add. FIXME: this could make an 'fadd' that
// reads directly from memory, but we don't support these yet.
unsigned ConstReg = makeAnotherReg(Type::DoubleTy);
addDirectMem(BuildMI(*BB, IP, X86::FLD32m, 4, ConstReg), Addr);
BuildMI(*BB, IP, X86::FpADD, 2, RealDestReg)
.addReg(ConstReg).addReg(DestReg);
}
return;
}
// Handle casts from floating point to integer now...
if (SrcClass == cFP) {
// Change the floating point control register to use "round towards zero"
// mode when truncating to an integer value.
//
int CWFrameIdx = F->getFrameInfo()->CreateStackObject(2, 2);
addFrameReference(BuildMI(*BB, IP, X86::FNSTCW16m, 4), CWFrameIdx);
// Load the old value of the high byte of the control word...
unsigned HighPartOfCW = makeAnotherReg(Type::UByteTy);
addFrameReference(BuildMI(*BB, IP, X86::MOV8rm, 4, HighPartOfCW),
CWFrameIdx, 1);
// Set the high part to be round to zero...
addFrameReference(BuildMI(*BB, IP, X86::MOV8mi, 5),
CWFrameIdx, 1).addImm(12);
// Reload the modified control word now...
addFrameReference(BuildMI(*BB, IP, X86::FLDCW16m, 4), CWFrameIdx);
// Restore the memory image of control word to original value
addFrameReference(BuildMI(*BB, IP, X86::MOV8mr, 5),
CWFrameIdx, 1).addReg(HighPartOfCW);
// We don't have the facilities for directly storing byte sized data to
// memory. Promote it to 16 bits. We also must promote unsigned values to
// larger classes because we only have signed FP stores.
unsigned StoreClass = DestClass;
const Type *StoreTy = DestTy;
if (StoreClass == cByte || DestTy->isUnsigned())
switch (StoreClass) {
case cByte: StoreTy = Type::ShortTy; StoreClass = cShort; break;
case cShort: StoreTy = Type::IntTy; StoreClass = cInt; break;
case cInt: StoreTy = Type::LongTy; StoreClass = cLong; break;
// The following treatment of cLong may not be perfectly right,
// but it survives chains of casts of the form
// double->ulong->double.
case cLong: StoreTy = Type::LongTy; StoreClass = cLong; break;
default: assert(0 && "Unknown store class!");
}
// Spill the integer to memory and reload it from there...
int FrameIdx =
F->getFrameInfo()->CreateStackObject(StoreTy, TM.getTargetData());
static const unsigned Op1[] =
{ 0, X86::FIST16m, X86::FIST32m, 0, X86::FISTP64m };
addFrameReference(BuildMI(*BB, IP, Op1[StoreClass], 5),
FrameIdx).addReg(SrcReg);
if (DestClass == cLong) {
addFrameReference(BuildMI(*BB, IP, X86::MOV32rm, 4, DestReg), FrameIdx);
addFrameReference(BuildMI(*BB, IP, X86::MOV32rm, 4, DestReg+1),
FrameIdx, 4);
} else {
static const unsigned Op2[] = { X86::MOV8rm, X86::MOV16rm, X86::MOV32rm };
addFrameReference(BuildMI(*BB, IP, Op2[DestClass], 4, DestReg), FrameIdx);
}
// Reload the original control word now...
addFrameReference(BuildMI(*BB, IP, X86::FLDCW16m, 4), CWFrameIdx);
return;
}
// Anything we haven't handled already, we can't (yet) handle at all.
assert(0 && "Unhandled cast instruction!");
abort();
}
/// visitVANextInst - Implement the va_next instruction...
///
void X86ISel::visitVANextInst(VANextInst &I) {
unsigned VAList = getReg(I.getOperand(0));
unsigned DestReg = getReg(I);
unsigned Size;
switch (I.getArgType()->getTypeID()) {
default:
std::cerr << I;
assert(0 && "Error: bad type for va_next instruction!");
return;
case Type::PointerTyID:
case Type::UIntTyID:
case Type::IntTyID:
Size = 4;
break;
case Type::ULongTyID:
case Type::LongTyID:
case Type::DoubleTyID:
Size = 8;
break;
}
// Increment the VAList pointer...
BuildMI(BB, X86::ADD32ri, 2, DestReg).addReg(VAList).addImm(Size);
}
void X86ISel::visitVAArgInst(VAArgInst &I) {
unsigned VAList = getReg(I.getOperand(0));
unsigned DestReg = getReg(I);
switch (I.getType()->getTypeID()) {
default:
std::cerr << I;
assert(0 && "Error: bad type for va_next instruction!");
return;
case Type::PointerTyID:
case Type::UIntTyID:
case Type::IntTyID:
addDirectMem(BuildMI(BB, X86::MOV32rm, 4, DestReg), VAList);
break;
case Type::ULongTyID:
case Type::LongTyID:
addDirectMem(BuildMI(BB, X86::MOV32rm, 4, DestReg), VAList);
addRegOffset(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), VAList, 4);
break;
case Type::DoubleTyID:
addDirectMem(BuildMI(BB, X86::FLD64m, 4, DestReg), VAList);
break;
}
}
/// visitGetElementPtrInst - instruction-select GEP instructions
///
void X86ISel::visitGetElementPtrInst(GetElementPtrInst &I) {
// If this GEP instruction will be folded into all of its users, we don't need
// to explicitly calculate it!
X86AddressMode AM;
if (isGEPFoldable(0, I.getOperand(0), I.op_begin()+1, I.op_end(), AM)) {
// Check all of the users of the instruction to see if they are loads and
// stores.
bool AllWillFold = true;
for (Value::use_iterator UI = I.use_begin(), E = I.use_end(); UI != E; ++UI)
if (cast<Instruction>(*UI)->getOpcode() != Instruction::Load)
if (cast<Instruction>(*UI)->getOpcode() != Instruction::Store ||
cast<Instruction>(*UI)->getOperand(0) == &I) {
AllWillFold = false;
break;
}
// If the instruction is foldable, and will be folded into all users, don't
// emit it!
if (AllWillFold) return;
}
unsigned outputReg = getReg(I);
emitGEPOperation(BB, BB->end(), I.getOperand(0),
I.op_begin()+1, I.op_end(), outputReg);
}
/// getGEPIndex - Inspect the getelementptr operands specified with GEPOps and
/// GEPTypes (the derived types being stepped through at each level). On return
/// from this function, if some indexes of the instruction are representable as
/// an X86 lea instruction, the machine operands are put into the Ops
/// instruction and the consumed indexes are poped from the GEPOps/GEPTypes
/// lists. Otherwise, GEPOps.size() is returned. If this returns a an
/// addressing mode that only partially consumes the input, the BaseReg input of
/// the addressing mode must be left free.
///
/// Note that there is one fewer entry in GEPTypes than there is in GEPOps.
///
void X86ISel::getGEPIndex(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
std::vector<Value*> &GEPOps,
std::vector<const Type*> &GEPTypes,
X86AddressMode &AM) {
const TargetData &TD = TM.getTargetData();
// Clear out the state we are working with...
AM.BaseType = X86AddressMode::RegBase;
AM.Base.Reg = 0; // No base register
AM.Scale = 1; // Unit scale
AM.IndexReg = 0; // No index register
AM.Disp = 0; // No displacement
// While there are GEP indexes that can be folded into the current address,
// keep processing them.
while (!GEPTypes.empty()) {
if (const StructType *StTy = dyn_cast<StructType>(GEPTypes.back())) {
// It's a struct access. CUI is the index into the structure,
// which names the field. This index must have unsigned type.
const ConstantUInt *CUI = cast<ConstantUInt>(GEPOps.back());
// Use the TargetData structure to pick out what the layout of the
// structure is in memory. Since the structure index must be constant, we
// can get its value and use it to find the right byte offset from the
// StructLayout class's list of structure member offsets.
AM.Disp += TD.getStructLayout(StTy)->MemberOffsets[CUI->getValue()];
GEPOps.pop_back(); // Consume a GEP operand
GEPTypes.pop_back();
} else {
// It's an array or pointer access: [ArraySize x ElementType].
const SequentialType *SqTy = cast<SequentialType>(GEPTypes.back());
Value *idx = GEPOps.back();
// idx is the index into the array. Unlike with structure
// indices, we may not know its actual value at code-generation
// time.
// If idx is a constant, fold it into the offset.
unsigned TypeSize = TD.getTypeSize(SqTy->getElementType());
if (ConstantSInt *CSI = dyn_cast<ConstantSInt>(idx)) {
AM.Disp += TypeSize*CSI->getValue();
} else if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(idx)) {
AM.Disp += TypeSize*CUI->getValue();
} else {
// If the index reg is already taken, we can't handle this index.
if (AM.IndexReg) return;
// If this is a size that we can handle, then add the index as
switch (TypeSize) {
case 1: case 2: case 4: case 8:
// These are all acceptable scales on X86.
AM.Scale = TypeSize;
break;
default:
// Otherwise, we can't handle this scale
return;
}
if (CastInst *CI = dyn_cast<CastInst>(idx))
if (CI->getOperand(0)->getType() == Type::IntTy ||
CI->getOperand(0)->getType() == Type::UIntTy)
idx = CI->getOperand(0);
AM.IndexReg = MBB ? getReg(idx, MBB, IP) : 1;
}
GEPOps.pop_back(); // Consume a GEP operand
GEPTypes.pop_back();
}
}
// GEPTypes is empty, which means we have a single operand left. Set it as
// the base register.
//
assert(AM.Base.Reg == 0);
if (AllocaInst *AI = dyn_castFixedAlloca(GEPOps.back())) {
AM.BaseType = X86AddressMode::FrameIndexBase;
AM.Base.FrameIndex = getFixedSizedAllocaFI(AI);
GEPOps.pop_back();
return;
}
if (GlobalValue *GV = dyn_cast<GlobalValue>(GEPOps.back())) {
AM.GV = GV;
GEPOps.pop_back();
return;
}
AM.Base.Reg = MBB ? getReg(GEPOps[0], MBB, IP) : 1;
GEPOps.pop_back(); // Consume the last GEP operand
}
/// isGEPFoldable - Return true if the specified GEP can be completely
/// folded into the addressing mode of a load/store or lea instruction.
bool X86ISel::isGEPFoldable(MachineBasicBlock *MBB,
Value *Src, User::op_iterator IdxBegin,
User::op_iterator IdxEnd, X86AddressMode &AM) {
std::vector<Value*> GEPOps;
GEPOps.resize(IdxEnd-IdxBegin+1);
GEPOps[0] = Src;
std::copy(IdxBegin, IdxEnd, GEPOps.begin()+1);
std::vector<const Type*>
GEPTypes(gep_type_begin(Src->getType(), IdxBegin, IdxEnd),
gep_type_end(Src->getType(), IdxBegin, IdxEnd));
MachineBasicBlock::iterator IP;
if (MBB) IP = MBB->end();
getGEPIndex(MBB, IP, GEPOps, GEPTypes, AM);
// We can fold it away iff the getGEPIndex call eliminated all operands.
return GEPOps.empty();
}
void X86ISel::emitGEPOperation(MachineBasicBlock *MBB,
MachineBasicBlock::iterator IP,
Value *Src, User::op_iterator IdxBegin,
User::op_iterator IdxEnd, unsigned TargetReg) {
const TargetData &TD = TM.getTargetData();
// If this is a getelementptr null, with all constant integer indices, just
// replace it with TargetReg = 42.
if (isa<ConstantPointerNull>(Src)) {
User::op_iterator I = IdxBegin;
for (; I != IdxEnd; ++I)
if (!isa<ConstantInt>(*I))
break;
if (I == IdxEnd) { // All constant indices
unsigned Offset = TD.getIndexedOffset(Src->getType(),
std::vector<Value*>(IdxBegin, IdxEnd));
BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addImm(Offset);
return;
}
}
std::vector<Value*> GEPOps;
GEPOps.resize(IdxEnd-IdxBegin+1);
GEPOps[0] = Src;
std::copy(IdxBegin, IdxEnd, GEPOps.begin()+1);
std::vector<const Type*> GEPTypes;
GEPTypes.assign(gep_type_begin(Src->getType(), IdxBegin, IdxEnd),
gep_type_end(Src->getType(), IdxBegin, IdxEnd));
// Keep emitting instructions until we consume the entire GEP instruction.
while (!GEPOps.empty()) {
unsigned OldSize = GEPOps.size();
X86AddressMode AM;
getGEPIndex(MBB, IP, GEPOps, GEPTypes, AM);
if (GEPOps.size() != OldSize) {
// getGEPIndex consumed some of the input. Build an LEA instruction here.
unsigned NextTarget = 0;
if (!GEPOps.empty()) {
assert(AM.Base.Reg == 0 &&
"getGEPIndex should have left the base register open for chaining!");
NextTarget = AM.Base.Reg = makeAnotherReg(Type::UIntTy);
}
if (AM.BaseType == X86AddressMode::RegBase &&
AM.IndexReg == 0 && AM.Disp == 0 && !AM.GV)
BuildMI(*MBB, IP, X86::MOV32rr, 1, TargetReg).addReg(AM.Base.Reg);
else if (AM.BaseType == X86AddressMode::RegBase && AM.Base.Reg == 0 &&
AM.IndexReg == 0 && AM.Disp == 0)
BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addGlobalAddress(AM.GV);
else
addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, TargetReg), AM);
--IP;
TargetReg = NextTarget;
} else if (GEPTypes.empty()) {
// The getGEPIndex operation didn't want to build an LEA. Check to see if
// all operands are consumed but the base pointer. If so, just load it
// into the register.
if (GlobalValue *GV = dyn_cast<GlobalValue>(GEPOps[0])) {
BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addGlobalAddress(GV);
} else {
unsigned BaseReg = getReg(GEPOps[0], MBB, IP);
BuildMI(*MBB, IP, X86::MOV32rr, 1, TargetReg).addReg(BaseReg);
}
break; // we are now done
} else {
// It's an array or pointer access: [ArraySize x ElementType].
const SequentialType *SqTy = cast<SequentialType>(GEPTypes.back());
Value *idx = GEPOps.back();
GEPOps.pop_back(); // Consume a GEP operand
GEPTypes.pop_back();
// Many GEP instructions use a [cast (int/uint) to LongTy] as their
// operand on X86. Handle this case directly now...
if (CastInst *CI = dyn_cast<CastInst>(idx))
if (CI->getOperand(0)->getType() == Type::IntTy ||
CI->getOperand(0)->getType() == Type::UIntTy)
idx = CI->getOperand(0);
// We want to add BaseReg to(idxReg * sizeof ElementType). First, we
// must find the size of the pointed-to type (Not coincidentally, the next
// type is the type of the elements in the array).
const Type *ElTy = SqTy->getElementType();
unsigned elementSize = TD.getTypeSize(ElTy);
// If idxReg is a constant, we don't need to perform the multiply!
if (ConstantInt *CSI = dyn_cast<ConstantInt>(idx)) {
if (!CSI->isNullValue()) {
unsigned Offset = elementSize*CSI->getRawValue();
unsigned Reg = makeAnotherReg(Type::UIntTy);
BuildMI(*MBB, IP, X86::ADD32ri, 2, TargetReg)
.addReg(Reg).addImm(Offset);
--IP; // Insert the next instruction before this one.
TargetReg = Reg; // Codegen the rest of the GEP into this
}
} else if (elementSize == 1) {
// If the element size is 1, we don't have to multiply, just add
unsigned idxReg = getReg(idx, MBB, IP);
unsigned Reg = makeAnotherReg(Type::UIntTy);
BuildMI(*MBB, IP, X86::ADD32rr, 2,TargetReg).addReg(Reg).addReg(idxReg);
--IP; // Insert the next instruction before this one.
TargetReg = Reg; // Codegen the rest of the GEP into this
} else {
unsigned idxReg = getReg(idx, MBB, IP);
unsigned OffsetReg = makeAnotherReg(Type::UIntTy);
// Make sure we can back the iterator up to point to the first
// instruction emitted.
MachineBasicBlock::iterator BeforeIt = IP;
if (IP == MBB->begin())
BeforeIt = MBB->end();
else
--BeforeIt;
doMultiplyConst(MBB, IP, OffsetReg, Type::IntTy, idxReg, elementSize);
// Emit an ADD to add OffsetReg to the basePtr.
unsigned Reg = makeAnotherReg(Type::UIntTy);
BuildMI(*MBB, IP, X86::ADD32rr, 2, TargetReg)
.addReg(Reg).addReg(OffsetReg);
// Step to the first instruction of the multiply.
if (BeforeIt == MBB->end())
IP = MBB->begin();
else
IP = ++BeforeIt;
TargetReg = Reg; // Codegen the rest of the GEP into this
}
}
}
}
/// visitAllocaInst - If this is a fixed size alloca, allocate space from the
/// frame manager, otherwise do it the hard way.
///
void X86ISel::visitAllocaInst(AllocaInst &I) {
// If this is a fixed size alloca in the entry block for the function, we
// statically stack allocate the space, so we don't need to do anything here.
//
if (dyn_castFixedAlloca(&I)) return;
// Find the data size of the alloca inst's getAllocatedType.
const Type *Ty = I.getAllocatedType();
unsigned TySize = TM.getTargetData().getTypeSize(Ty);
// Create a register to hold the temporary result of multiplying the type size
// constant by the variable amount.
unsigned TotalSizeReg = makeAnotherReg(Type::UIntTy);
unsigned SrcReg1 = getReg(I.getArraySize());
// TotalSizeReg = mul <numelements>, <TypeSize>
MachineBasicBlock::iterator MBBI = BB->end();
doMultiplyConst(BB, MBBI, TotalSizeReg, Type::UIntTy, SrcReg1, TySize);
// AddedSize = add <TotalSizeReg>, 15
unsigned AddedSizeReg = makeAnotherReg(Type::UIntTy);
BuildMI(BB, X86::ADD32ri, 2, AddedSizeReg).addReg(TotalSizeReg).addImm(15);
// AlignedSize = and <AddedSize>, ~15
unsigned AlignedSize = makeAnotherReg(Type::UIntTy);
BuildMI(BB, X86::AND32ri, 2, AlignedSize).addReg(AddedSizeReg).addImm(~15);
// Subtract size from stack pointer, thereby allocating some space.
BuildMI(BB, X86::SUB32rr, 2, X86::ESP).addReg(X86::ESP).addReg(AlignedSize);
// Put a pointer to the space into the result register, by copying
// the stack pointer.
BuildMI(BB, X86::MOV32rr, 1, getReg(I)).addReg(X86::ESP);
// Inform the Frame Information that we have just allocated a variable-sized
// object.
F->getFrameInfo()->CreateVariableSizedObject();
}
/// visitMallocInst - Malloc instructions are code generated into direct calls
/// to the library malloc.
///
void X86ISel::visitMallocInst(MallocInst &I) {
unsigned AllocSize = TM.getTargetData().getTypeSize(I.getAllocatedType());
unsigned Arg;
if (ConstantUInt *C = dyn_cast<ConstantUInt>(I.getOperand(0))) {
Arg = getReg(ConstantUInt::get(Type::UIntTy, C->getValue() * AllocSize));
} else {
Arg = makeAnotherReg(Type::UIntTy);
unsigned Op0Reg = getReg(I.getOperand(0));
MachineBasicBlock::iterator MBBI = BB->end();
doMultiplyConst(BB, MBBI, Arg, Type::UIntTy, Op0Reg, AllocSize);
}
std::vector<ValueRecord> Args;
Args.push_back(ValueRecord(Arg, Type::UIntTy));
MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
1).addExternalSymbol("malloc", true);
doCall(ValueRecord(getReg(I), I.getType()), TheCall, Args);
}
/// visitFreeInst - Free instructions are code gen'd to call the free libc
/// function.
///
void X86ISel::visitFreeInst(FreeInst &I) {
std::vector<ValueRecord> Args;
Args.push_back(ValueRecord(I.getOperand(0)));
MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
1).addExternalSymbol("free", true);
doCall(ValueRecord(0, Type::VoidTy), TheCall, Args);
}
/// createX86SimpleInstructionSelector - This pass converts an LLVM function
/// into a machine code representation is a very simple peep-hole fashion. The
/// generated code sucks but the implementation is nice and simple.
///
FunctionPass *llvm::createX86SimpleInstructionSelector(TargetMachine &TM) {
return new X86ISel(TM);
}