llvm-6502/test/CodeGen/Thumb2/float-intrinsics-float.ll
Oliver Stannard 9d7038c437 [ARM] Allow selecting VRINT[APMXZR] and VCVT[BT] instructions for FPv5
Currently, we only codegen the VRINT[APMXZR] and VCVT[BT] instructions
when targeting ARMv8, but they are actually present on any target with
FP-ARMv8. Note that FP-ARMv8 is called FPv5 when is is part of an
M-profile core, but they have the same instructions so we model them
both as FPARMv8 in the ARM backend.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218763 91177308-0d34-0410-b5e6-96231b3b80d8
2014-10-01 13:13:18 +00:00

222 lines
6.3 KiB
LLVM

; RUN: llc < %s -mtriple=thumbv7-none-eabi -mcpu=cortex-m3 | FileCheck %s -check-prefix=CHECK -check-prefix=SOFT -check-prefix=NONE
; RUN: llc < %s -mtriple=thumbv7-none-eabihf -mcpu=cortex-m4 | FileCheck %s -check-prefix=CHECK -check-prefix=HARD -check-prefix=SP -check-prefix=VMLA
; RUN: llc < %s -mtriple=thumbv7-none-eabihf -mcpu=cortex-m7 | FileCheck %s -check-prefix=CHECK -check-prefix=HARD -check-prefix=DP -check-prefix=VFP -check-prefix=FP-ARMv8 -check-prefix=VMLA
; RUN: llc < %s -mtriple=thumbv7-none-eabihf -mcpu=cortex-m7 -mattr=+fp-only-sp | FileCheck %s -check-prefix=CHECK -check-prefix=HARD -check-prefix=SP -check-prefix=FP-ARMv8 -check-prefix=VMLA
; RUN: llc < %s -mtriple=thumbv7-none-eabihf -mcpu=cortex-a7 | FileCheck %s -check-prefix=CHECK -check-prefix=HARD -check-prefix=DP -check-prefix=NEON -check-prefix=VFP4 -check-prefix=NO-VMLA
; RUN: llc < %s -mtriple=thumbv7-none-eabihf -mcpu=cortex-a57 | FileCheck %s -check-prefix=CHECK -check-prefix=HARD -check-prefix=DP -check-prefix=NEON -check-prefix=FP-ARMv8 -check-prefix=VMLA
declare float @llvm.sqrt.f32(float %Val)
define float @sqrt_f(float %a) {
; CHECK-LABEL: sqrt_f:
; SOFT: bl sqrtf
; HARD: vsqrt.f32 s0, s0
%1 = call float @llvm.sqrt.f32(float %a)
ret float %1
}
declare float @llvm.powi.f32(float %Val, i32 %power)
define float @powi_f(float %a, i32 %b) {
; CHECK-LABEL: powi_f:
; SOFT: bl __powisf2
; HARD: b __powisf2
%1 = call float @llvm.powi.f32(float %a, i32 %b)
ret float %1
}
declare float @llvm.sin.f32(float %Val)
define float @sin_f(float %a) {
; CHECK-LABEL: sin_f:
; SOFT: bl sinf
; HARD: b sinf
%1 = call float @llvm.sin.f32(float %a)
ret float %1
}
declare float @llvm.cos.f32(float %Val)
define float @cos_f(float %a) {
; CHECK-LABEL: cos_f:
; SOFT: bl cosf
; HARD: b cosf
%1 = call float @llvm.cos.f32(float %a)
ret float %1
}
declare float @llvm.pow.f32(float %Val, float %power)
define float @pow_f(float %a, float %b) {
; CHECK-LABEL: pow_f:
; SOFT: bl powf
; HARD: b powf
%1 = call float @llvm.pow.f32(float %a, float %b)
ret float %1
}
declare float @llvm.exp.f32(float %Val)
define float @exp_f(float %a) {
; CHECK-LABEL: exp_f:
; SOFT: bl expf
; HARD: b expf
%1 = call float @llvm.exp.f32(float %a)
ret float %1
}
declare float @llvm.exp2.f32(float %Val)
define float @exp2_f(float %a) {
; CHECK-LABEL: exp2_f:
; SOFT: bl exp2f
; HARD: b exp2f
%1 = call float @llvm.exp2.f32(float %a)
ret float %1
}
declare float @llvm.log.f32(float %Val)
define float @log_f(float %a) {
; CHECK-LABEL: log_f:
; SOFT: bl logf
; HARD: b logf
%1 = call float @llvm.log.f32(float %a)
ret float %1
}
declare float @llvm.log10.f32(float %Val)
define float @log10_f(float %a) {
; CHECK-LABEL: log10_f:
; SOFT: bl log10f
; HARD: b log10f
%1 = call float @llvm.log10.f32(float %a)
ret float %1
}
declare float @llvm.log2.f32(float %Val)
define float @log2_f(float %a) {
; CHECK-LABEL: log2_f:
; SOFT: bl log2f
; HARD: b log2f
%1 = call float @llvm.log2.f32(float %a)
ret float %1
}
declare float @llvm.fma.f32(float %a, float %b, float %c)
define float @fma_f(float %a, float %b, float %c) {
; CHECK-LABEL: fma_f:
; SOFT: bl fmaf
; HARD: vfma.f32
%1 = call float @llvm.fma.f32(float %a, float %b, float %c)
ret float %1
}
declare float @llvm.fabs.f32(float %Val)
define float @abs_f(float %a) {
; CHECK-LABEL: abs_f:
; SOFT: bic r0, r0, #-2147483648
; HARD: vabs.f32
%1 = call float @llvm.fabs.f32(float %a)
ret float %1
}
declare float @llvm.copysign.f32(float %Mag, float %Sgn)
define float @copysign_f(float %a, float %b) {
; CHECK-LABEL: copysign_f:
; NONE: lsrs [[REG:r[0-9]+]], r{{[0-9]+}}, #31
; NONE: bfi r{{[0-9]+}}, [[REG]], #31, #1
; SP: lsrs [[REG:r[0-9]+]], r{{[0-9]+}}, #31
; SP: bfi r{{[0-9]+}}, [[REG]], #31, #1
; VFP: lsrs [[REG:r[0-9]+]], r{{[0-9]+}}, #31
; VFP: bfi r{{[0-9]+}}, [[REG]], #31, #1
; NEON: vmov.i32 [[REG:d[0-9]+]], #0x80000000
; NEON: vbsl [[REG]], d
%1 = call float @llvm.copysign.f32(float %a, float %b)
ret float %1
}
declare float @llvm.floor.f32(float %Val)
define float @floor_f(float %a) {
; CHECK-LABEL: floor_f:
; SOFT: bl floorf
; VFP4: b floorf
; FP-ARMv8: vrintm.f32
%1 = call float @llvm.floor.f32(float %a)
ret float %1
}
declare float @llvm.ceil.f32(float %Val)
define float @ceil_f(float %a) {
; CHECK-LABEL: ceil_f:
; SOFT: bl ceilf
; VFP4: b ceilf
; FP-ARMv8: vrintp.f32
%1 = call float @llvm.ceil.f32(float %a)
ret float %1
}
declare float @llvm.trunc.f32(float %Val)
define float @trunc_f(float %a) {
; CHECK-LABEL: trunc_f:
; SOFT: bl truncf
; VFP4: b truncf
; FP-ARMv8: vrintz.f32
%1 = call float @llvm.trunc.f32(float %a)
ret float %1
}
declare float @llvm.rint.f32(float %Val)
define float @rint_f(float %a) {
; CHECK-LABEL: rint_f:
; SOFT: bl rintf
; VFP4: b rintf
; FP-ARMv8: vrintx.f32
%1 = call float @llvm.rint.f32(float %a)
ret float %1
}
declare float @llvm.nearbyint.f32(float %Val)
define float @nearbyint_f(float %a) {
; CHECK-LABEL: nearbyint_f:
; SOFT: bl nearbyintf
; VFP4: b nearbyintf
; FP-ARMv8: vrintr.f32
%1 = call float @llvm.nearbyint.f32(float %a)
ret float %1
}
declare float @llvm.round.f32(float %Val)
define float @round_f(float %a) {
; CHECK-LABEL: round_f:
; SOFT: bl roundf
; VFP4: b roundf
; FP-ARMv8: vrinta.f32
%1 = call float @llvm.round.f32(float %a)
ret float %1
}
; FIXME: why does cortex-m4 use vmla, while cortex-a7 uses vmul+vadd?
; (these should be equivalent, even the rounding is the same)
declare float @llvm.fmuladd.f32(float %a, float %b, float %c)
define float @fmuladd_f(float %a, float %b, float %c) {
; CHECK-LABEL: fmuladd_f:
; SOFT: bl __aeabi_fmul
; SOFT: bl __aeabi_fadd
; VMLA: vmla.f32
; NO-VMLA: vmul.f32
; NO-VMLA: vadd.f32
%1 = call float @llvm.fmuladd.f32(float %a, float %b, float %c)
ret float %1
}
declare i16 @llvm.convert.to.fp16.f32(float %a)
define i16 @f_to_h(float %a) {
; CHECK-LABEL: f_to_h:
; SOFT: bl __gnu_f2h_ieee
; HARD: vcvt{{[bt]}}.f16.f32
%1 = call i16 @llvm.convert.to.fp16.f32(float %a)
ret i16 %1
}
declare float @llvm.convert.from.fp16.f32(i16 %a)
define float @h_to_f(i16 %a) {
; CHECK-LABEL: h_to_f:
; SOFT: bl __gnu_h2f_ieee
; HARD: vcvt{{[bt]}}.f32.f16
%1 = call float @llvm.convert.from.fp16.f32(i16 %a)
ret float %1
}