6502/llvm-6502
1
0
Fork 0
mirror of https://github.com/c64scene-ar/llvm-6502.git synced 2024-12-13 20:32:21 +00:00
Code Issues Projects Releases Wiki Activity
9e1f653e2f
llvm-6502/test/Transforms/LICM/scalar_promote.ll
Chandler Carruth 3d69cf57e1 [LPM] Make LCSSA a utility with a FunctionPass that applies it to all 
the loops in a function, and teach LICM to work in the presance of
LCSSA.

Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.

Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.

The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.

The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.

With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.

There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200067 91177308-0d34-0410-b5e6-96231b3b80d8
2014-01-25 04:07:24 +00:00

194 lines
5.3 KiB
LLVM
Raw Blame History

; RUN: opt < %s -basicaa -tbaa -licm -S | FileCheck %s
target datalayout = "E-p:64:64:64-a0:0:8-f32:32:32-f64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-v64:64:64-v128:128:128"
@X = global i32 7 ; <i32*> [#uses=4]
define void @test1(i32 %i) {
Entry:
br label %Loop
; CHECK-LABEL: @test1(
; CHECK: Entry:
; CHECK-NEXT: load i32* @X
; CHECK-NEXT: br label %Loop
Loop: ; preds = %Loop, %0
%j = phi i32 [ 0, %Entry ], [ %Next, %Loop ] ; <i32> [#uses=1]
%x = load i32* @X ; <i32> [#uses=1]
%x2 = add i32 %x, 1 ; <i32> [#uses=1]
store i32 %x2, i32* @X
%Next = add i32 %j, 1 ; <i32> [#uses=2]
%cond = icmp eq i32 %Next, 0 ; <i1> [#uses=1]
br i1 %cond, label %Out, label %Loop
Out:
ret void
; CHECK: Out:
; CHECK-NEXT: %[[LCSSAPHI:.*]] = phi i32 [ %x2
; CHECK-NEXT: store i32 %[[LCSSAPHI]], i32* @X
; CHECK-NEXT: ret void
}
define void @test2(i32 %i) {
Entry:
br label %Loop
; CHECK-LABEL: @test2(
; CHECK: Entry:
; CHECK-NEXT: %.promoted = load i32* getelementptr inbounds (i32* @X, i64 1)
; CHECK-NEXT: br label %Loop
Loop: ; preds = %Loop, %0
%X1 = getelementptr i32* @X, i64 1 ; <i32*> [#uses=1]
%A = load i32* %X1 ; <i32> [#uses=1]
%V = add i32 %A, 1 ; <i32> [#uses=1]
%X2 = getelementptr i32* @X, i64 1 ; <i32*> [#uses=1]
store i32 %V, i32* %X2
br i1 false, label %Loop, label %Exit
Exit: ; preds = %Loop
ret void
; CHECK: Exit:
; CHECK-NEXT: %[[LCSSAPHI:.*]] = phi i32 [ %V
; CHECK-NEXT: store i32 %[[LCSSAPHI]], i32* getelementptr inbounds (i32* @X, i64 1)
; CHECK-NEXT: ret void
}
define void @test3(i32 %i) {
; CHECK-LABEL: @test3(
br label %Loop
Loop:
; Should not promote this to a register
%x = load volatile i32* @X
%x2 = add i32 %x, 1
store i32 %x2, i32* @X
br i1 true, label %Out, label %Loop
; CHECK: Loop:
; CHECK-NEXT: load volatile
Out: ; preds = %Loop
ret void
}
; PR8041
define void @test4(i8* %x, i8 %n) {
; CHECK-LABEL: @test4(
%handle1 = alloca i8*
%handle2 = alloca i8*
store i8* %x, i8** %handle1
br label %loop
loop:
%tmp = getelementptr i8* %x, i64 8
store i8* %tmp, i8** %handle2
br label %subloop
subloop:
%count = phi i8 [ 0, %loop ], [ %nextcount, %subloop ]
%offsetx2 = load i8** %handle2
store i8 %n, i8* %offsetx2
%newoffsetx2 = getelementptr i8* %offsetx2, i64 -1
store i8* %newoffsetx2, i8** %handle2
%nextcount = add i8 %count, 1
%innerexitcond = icmp sge i8 %nextcount, 8
br i1 %innerexitcond, label %innerexit, label %subloop
; Should have promoted 'handle2' accesses.
; CHECK: subloop:
; CHECK-NEXT: phi i8* [
; CHECK-NEXT: %count = phi i8 [
; CHECK-NEXT: store i8 %n
; CHECK-NOT: store
; CHECK: br i1
innerexit:
%offsetx1 = load i8** %handle1
%val = load i8* %offsetx1
%cond = icmp eq i8 %val, %n
br i1 %cond, label %exit, label %loop
; Should not have promoted offsetx1 loads.
; CHECK: innerexit:
; CHECK: %val = load i8* %offsetx1
; CHECK: %cond = icmp eq i8 %val, %n
; CHECK: br i1 %cond, label %exit, label %loop
exit:
ret void
}
define void @test5(i32 %i, i32** noalias %P2) {
Entry:
br label %Loop
; CHECK-LABEL: @test5(
; CHECK: Entry:
; CHECK-NEXT: load i32* @X
; CHECK-NEXT: br label %Loop
Loop: ; preds = %Loop, %0
%j = phi i32 [ 0, %Entry ], [ %Next, %Loop ] ; <i32> [#uses=1]
%x = load i32* @X ; <i32> [#uses=1]
%x2 = add i32 %x, 1 ; <i32> [#uses=1]
store i32 %x2, i32* @X
store volatile i32* @X, i32** %P2
%Next = add i32 %j, 1 ; <i32> [#uses=2]
%cond = icmp eq i32 %Next, 0 ; <i1> [#uses=1]
br i1 %cond, label %Out, label %Loop
Out:
ret void
; CHECK: Out:
; CHECK-NEXT: %[[LCSSAPHI:.*]] = phi i32 [ %x2
; CHECK-NEXT: store i32 %[[LCSSAPHI]], i32* @X
; CHECK-NEXT: ret void
}
; PR14753 - Preserve TBAA tags when promoting values in a loop.
define void @test6(i32 %n, float* nocapture %a, i32* %gi) {
entry:
store i32 0, i32* %gi, align 4, !tbaa !0
%cmp1 = icmp slt i32 0, %n
br i1 %cmp1, label %for.body.lr.ph, label %for.end
for.body.lr.ph: ; preds = %entry
br label %for.body
for.body: ; preds = %for.body.lr.ph, %for.body
%storemerge2 = phi i32 [ 0, %for.body.lr.ph ], [ %inc, %for.body ]
%idxprom = sext i32 %storemerge2 to i64
%arrayidx = getelementptr inbounds float* %a, i64 %idxprom
store float 0.000000e+00, float* %arrayidx, align 4, !tbaa !3
%0 = load i32* %gi, align 4, !tbaa !0
%inc = add nsw i32 %0, 1
store i32 %inc, i32* %gi, align 4, !tbaa !0
%cmp = icmp slt i32 %inc, %n
br i1 %cmp, label %for.body, label %for.cond.for.end_crit_edge
for.cond.for.end_crit_edge: ; preds = %for.body
br label %for.end
for.end: ; preds = %for.cond.for.end_crit_edge, %entry
ret void
; CHECK: for.body.lr.ph:
; CHECK-NEXT: %gi.promoted = load i32* %gi, align 4, !tbaa !0
; CHECK: for.cond.for.end_crit_edge:
; CHECK-NEXT: %[[LCSSAPHI:.*]] = phi i32 [ %inc
; CHECK-NEXT: store i32 %[[LCSSAPHI]], i32* %gi, align 4, !tbaa !0
}
!0 = metadata !{metadata !4, metadata !4, i64 0}
!1 = metadata !{metadata !"omnipotent char", metadata !2}
!2 = metadata !{metadata !"Simple C/C++ TBAA"}
!3 = metadata !{metadata !5, metadata !5, i64 0}
!4 = metadata !{metadata !"int", metadata !1}
!5 = metadata !{metadata !"float", metadata !1}
Reference in New Issue View Git Blame Copy Permalink