llvm-6502/lib/Target/X86/X86InstrCompiler.td
Chandler Carruth acc068e873 Switch the lowering of CTLZ_ZERO_UNDEF from a .td pattern back to the
X86ISelLowering C++ code. Because this is lowered via an xor wrapped
around a bsr, we want the dagcombine which runs after isel lowering to
have a chance to clean things up. In particular, it is very common to
see code which looks like:

  (sizeof(x)*8 - 1) ^ __builtin_clz(x)

Which is trying to compute the most significant bit of 'x'. That's
actually the value computed directly by the 'bsr' instruction, but if we
match it too late, we'll get completely redundant xor instructions.

The more naive code for the above (subtracting rather than using an xor)
still isn't handled correctly due to the dagcombine getting confused.

Also, while here fix an issue spotted by inspection: we should have been
expanding the zero-undef variants to the normal variants when there is
an 'lzcnt' instruction. Do so, and test for this. We don't want to
generate unnecessary 'bsr' instructions.

These two changes fix some regressions in encoding and decoding
benchmarks. However, there is still a *lot* to be improve on in this
type of code.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147244 91177308-0d34-0410-b5e6-96231b3b80d8
2011-12-24 10:55:54 +00:00

1764 lines
79 KiB
TableGen

//===- X86InstrCompiler.td - Compiler Pseudos and Patterns -*- tablegen -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file describes the various pseudo instructions used by the compiler,
// as well as Pat patterns used during instruction selection.
//
//===----------------------------------------------------------------------===//
//===----------------------------------------------------------------------===//
// Pattern Matching Support
def GetLo32XForm : SDNodeXForm<imm, [{
// Transformation function: get the low 32 bits.
return getI32Imm((unsigned)N->getZExtValue());
}]>;
def GetLo8XForm : SDNodeXForm<imm, [{
// Transformation function: get the low 8 bits.
return getI8Imm((uint8_t)N->getZExtValue());
}]>;
//===----------------------------------------------------------------------===//
// Random Pseudo Instructions.
// PIC base construction. This expands to code that looks like this:
// call $next_inst
// popl %destreg"
let neverHasSideEffects = 1, isNotDuplicable = 1, Uses = [ESP] in
def MOVPC32r : Ii32<0xE8, Pseudo, (outs GR32:$reg), (ins i32imm:$label),
"", []>;
// ADJCALLSTACKDOWN/UP implicitly use/def ESP because they may be expanded into
// a stack adjustment and the codegen must know that they may modify the stack
// pointer before prolog-epilog rewriting occurs.
// Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become
// sub / add which can clobber EFLAGS.
let Defs = [ESP, EFLAGS], Uses = [ESP] in {
def ADJCALLSTACKDOWN32 : I<0, Pseudo, (outs), (ins i32imm:$amt),
"#ADJCALLSTACKDOWN",
[(X86callseq_start timm:$amt)]>,
Requires<[In32BitMode]>;
def ADJCALLSTACKUP32 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKUP",
[(X86callseq_end timm:$amt1, timm:$amt2)]>,
Requires<[In32BitMode]>;
}
// ADJCALLSTACKDOWN/UP implicitly use/def RSP because they may be expanded into
// a stack adjustment and the codegen must know that they may modify the stack
// pointer before prolog-epilog rewriting occurs.
// Pessimistically assume ADJCALLSTACKDOWN / ADJCALLSTACKUP will become
// sub / add which can clobber EFLAGS.
let Defs = [RSP, EFLAGS], Uses = [RSP] in {
def ADJCALLSTACKDOWN64 : I<0, Pseudo, (outs), (ins i32imm:$amt),
"#ADJCALLSTACKDOWN",
[(X86callseq_start timm:$amt)]>,
Requires<[In64BitMode]>;
def ADJCALLSTACKUP64 : I<0, Pseudo, (outs), (ins i32imm:$amt1, i32imm:$amt2),
"#ADJCALLSTACKUP",
[(X86callseq_end timm:$amt1, timm:$amt2)]>,
Requires<[In64BitMode]>;
}
// x86-64 va_start lowering magic.
let usesCustomInserter = 1 in {
def VASTART_SAVE_XMM_REGS : I<0, Pseudo,
(outs),
(ins GR8:$al,
i64imm:$regsavefi, i64imm:$offset,
variable_ops),
"#VASTART_SAVE_XMM_REGS $al, $regsavefi, $offset",
[(X86vastart_save_xmm_regs GR8:$al,
imm:$regsavefi,
imm:$offset)]>;
// The VAARG_64 pseudo-instruction takes the address of the va_list,
// and places the address of the next argument into a register.
let Defs = [EFLAGS] in
def VAARG_64 : I<0, Pseudo,
(outs GR64:$dst),
(ins i8mem:$ap, i32imm:$size, i8imm:$mode, i32imm:$align),
"#VAARG_64 $dst, $ap, $size, $mode, $align",
[(set GR64:$dst,
(X86vaarg64 addr:$ap, imm:$size, imm:$mode, imm:$align)),
(implicit EFLAGS)]>;
// Dynamic stack allocation yields a _chkstk or _alloca call for all Windows
// targets. These calls are needed to probe the stack when allocating more than
// 4k bytes in one go. Touching the stack at 4K increments is necessary to
// ensure that the guard pages used by the OS virtual memory manager are
// allocated in correct sequence.
// The main point of having separate instruction are extra unmodelled effects
// (compared to ordinary calls) like stack pointer change.
let Defs = [EAX, ESP, EFLAGS], Uses = [ESP] in
def WIN_ALLOCA : I<0, Pseudo, (outs), (ins),
"# dynamic stack allocation",
[(X86WinAlloca)]>;
// When using segmented stacks these are lowered into instructions which first
// check if the current stacklet has enough free memory. If it does, memory is
// allocated by bumping the stack pointer. Otherwise memory is allocated from
// the heap.
let Defs = [EAX, ESP, EFLAGS], Uses = [ESP] in
def SEG_ALLOCA_32 : I<0, Pseudo, (outs GR32:$dst), (ins GR32:$size),
"# variable sized alloca for segmented stacks",
[(set GR32:$dst,
(X86SegAlloca GR32:$size))]>,
Requires<[In32BitMode]>;
let Defs = [RAX, RSP, EFLAGS], Uses = [RSP] in
def SEG_ALLOCA_64 : I<0, Pseudo, (outs GR64:$dst), (ins GR64:$size),
"# variable sized alloca for segmented stacks",
[(set GR64:$dst,
(X86SegAlloca GR64:$size))]>,
Requires<[In64BitMode]>;
}
//===----------------------------------------------------------------------===//
// EH Pseudo Instructions
//
let isTerminator = 1, isReturn = 1, isBarrier = 1,
hasCtrlDep = 1, isCodeGenOnly = 1 in {
def EH_RETURN : I<0xC3, RawFrm, (outs), (ins GR32:$addr),
"ret\t#eh_return, addr: $addr",
[(X86ehret GR32:$addr)]>;
}
let isTerminator = 1, isReturn = 1, isBarrier = 1,
hasCtrlDep = 1, isCodeGenOnly = 1 in {
def EH_RETURN64 : I<0xC3, RawFrm, (outs), (ins GR64:$addr),
"ret\t#eh_return, addr: $addr",
[(X86ehret GR64:$addr)]>;
}
//===----------------------------------------------------------------------===//
// Pseudo instructions used by segmented stacks.
//
// This is lowered into a RET instruction by MCInstLower. We need
// this so that we don't have to have a MachineBasicBlock which ends
// with a RET and also has successors.
let isPseudo = 1 in {
def MORESTACK_RET: I<0, Pseudo, (outs), (ins),
"", []>;
// This instruction is lowered to a RET followed by a MOV. The two
// instructions are not generated on a higher level since then the
// verifier sees a MachineBasicBlock ending with a non-terminator.
def MORESTACK_RET_RESTORE_R10 : I<0, Pseudo, (outs), (ins),
"", []>;
}
//===----------------------------------------------------------------------===//
// Alias Instructions
//===----------------------------------------------------------------------===//
// Alias instructions that map movr0 to xor.
// FIXME: remove when we can teach regalloc that xor reg, reg is ok.
// FIXME: Set encoding to pseudo.
let Defs = [EFLAGS], isReMaterializable = 1, isAsCheapAsAMove = 1,
isCodeGenOnly = 1 in {
def MOV8r0 : I<0x30, MRMInitReg, (outs GR8 :$dst), (ins), "",
[(set GR8:$dst, 0)]>;
// We want to rewrite MOV16r0 in terms of MOV32r0, because it's a smaller
// encoding and avoids a partial-register update sometimes, but doing so
// at isel time interferes with rematerialization in the current register
// allocator. For now, this is rewritten when the instruction is lowered
// to an MCInst.
def MOV16r0 : I<0x31, MRMInitReg, (outs GR16:$dst), (ins),
"",
[(set GR16:$dst, 0)]>, OpSize;
// FIXME: Set encoding to pseudo.
def MOV32r0 : I<0x31, MRMInitReg, (outs GR32:$dst), (ins), "",
[(set GR32:$dst, 0)]>;
}
// We want to rewrite MOV64r0 in terms of MOV32r0, because it's sometimes a
// smaller encoding, but doing so at isel time interferes with rematerialization
// in the current register allocator. For now, this is rewritten when the
// instruction is lowered to an MCInst.
// FIXME: AddedComplexity gives this a higher priority than MOV64ri32. Remove
// when we have a better way to specify isel priority.
let Defs = [EFLAGS], isCodeGenOnly=1,
AddedComplexity = 1, isReMaterializable = 1, isAsCheapAsAMove = 1 in
def MOV64r0 : I<0x31, MRMInitReg, (outs GR64:$dst), (ins), "",
[(set GR64:$dst, 0)]>;
// Materialize i64 constant where top 32-bits are zero. This could theoretically
// use MOV32ri with a SUBREG_TO_REG to represent the zero-extension, however
// that would make it more difficult to rematerialize.
let AddedComplexity = 1, isReMaterializable = 1, isAsCheapAsAMove = 1,
isCodeGenOnly = 1 in
def MOV64ri64i32 : Ii32<0xB8, AddRegFrm, (outs GR64:$dst), (ins i64i32imm:$src),
"", [(set GR64:$dst, i64immZExt32:$src)]>;
// Use sbb to materialize carry bit.
let Uses = [EFLAGS], Defs = [EFLAGS], isCodeGenOnly = 1 in {
// FIXME: These are pseudo ops that should be replaced with Pat<> patterns.
// However, Pat<> can't replicate the destination reg into the inputs of the
// result.
// FIXME: Change these to have encoding Pseudo when X86MCCodeEmitter replaces
// X86CodeEmitter.
def SETB_C8r : I<0x18, MRMInitReg, (outs GR8:$dst), (ins), "",
[(set GR8:$dst, (X86setcc_c X86_COND_B, EFLAGS))]>;
def SETB_C16r : I<0x19, MRMInitReg, (outs GR16:$dst), (ins), "",
[(set GR16:$dst, (X86setcc_c X86_COND_B, EFLAGS))]>,
OpSize;
def SETB_C32r : I<0x19, MRMInitReg, (outs GR32:$dst), (ins), "",
[(set GR32:$dst, (X86setcc_c X86_COND_B, EFLAGS))]>;
def SETB_C64r : RI<0x19, MRMInitReg, (outs GR64:$dst), (ins), "",
[(set GR64:$dst, (X86setcc_c X86_COND_B, EFLAGS))]>;
} // isCodeGenOnly
def : Pat<(i16 (anyext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C16r)>;
def : Pat<(i32 (anyext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C32r)>;
def : Pat<(i64 (anyext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C64r)>;
def : Pat<(i16 (sext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C16r)>;
def : Pat<(i32 (sext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C32r)>;
def : Pat<(i64 (sext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C64r)>;
// We canonicalize 'setb' to "(and (sbb reg,reg), 1)" on the hope that the and
// will be eliminated and that the sbb can be extended up to a wider type. When
// this happens, it is great. However, if we are left with an 8-bit sbb and an
// and, we might as well just match it as a setb.
def : Pat<(and (i8 (X86setcc_c X86_COND_B, EFLAGS)), 1),
(SETBr)>;
// (add OP, SETB) -> (adc OP, 0)
def : Pat<(add (and (i8 (X86setcc_c X86_COND_B, EFLAGS)), 1), GR8:$op),
(ADC8ri GR8:$op, 0)>;
def : Pat<(add (and (i32 (X86setcc_c X86_COND_B, EFLAGS)), 1), GR32:$op),
(ADC32ri8 GR32:$op, 0)>;
def : Pat<(add (and (i64 (X86setcc_c X86_COND_B, EFLAGS)), 1), GR64:$op),
(ADC64ri8 GR64:$op, 0)>;
// (sub OP, SETB) -> (sbb OP, 0)
def : Pat<(sub GR8:$op, (and (i8 (X86setcc_c X86_COND_B, EFLAGS)), 1)),
(SBB8ri GR8:$op, 0)>;
def : Pat<(sub GR32:$op, (and (i32 (X86setcc_c X86_COND_B, EFLAGS)), 1)),
(SBB32ri8 GR32:$op, 0)>;
def : Pat<(sub GR64:$op, (and (i64 (X86setcc_c X86_COND_B, EFLAGS)), 1)),
(SBB64ri8 GR64:$op, 0)>;
// (sub OP, SETCC_CARRY) -> (adc OP, 0)
def : Pat<(sub GR8:$op, (i8 (X86setcc_c X86_COND_B, EFLAGS))),
(ADC8ri GR8:$op, 0)>;
def : Pat<(sub GR32:$op, (i32 (X86setcc_c X86_COND_B, EFLAGS))),
(ADC32ri8 GR32:$op, 0)>;
def : Pat<(sub GR64:$op, (i64 (X86setcc_c X86_COND_B, EFLAGS))),
(ADC64ri8 GR64:$op, 0)>;
//===----------------------------------------------------------------------===//
// String Pseudo Instructions
//
let Defs = [ECX,EDI,ESI], Uses = [ECX,EDI,ESI], isCodeGenOnly = 1 in {
def REP_MOVSB : I<0xA4, RawFrm, (outs), (ins), "{rep;movsb|rep movsb}",
[(X86rep_movs i8)]>, REP;
def REP_MOVSW : I<0xA5, RawFrm, (outs), (ins), "{rep;movsw|rep movsw}",
[(X86rep_movs i16)]>, REP, OpSize;
def REP_MOVSD : I<0xA5, RawFrm, (outs), (ins), "{rep;movsl|rep movsd}",
[(X86rep_movs i32)]>, REP;
}
let Defs = [RCX,RDI,RSI], Uses = [RCX,RDI,RSI], isCodeGenOnly = 1 in
def REP_MOVSQ : RI<0xA5, RawFrm, (outs), (ins), "{rep;movsq|rep movsq}",
[(X86rep_movs i64)]>, REP;
// FIXME: Should use "(X86rep_stos AL)" as the pattern.
let Defs = [ECX,EDI], Uses = [AL,ECX,EDI], isCodeGenOnly = 1 in
def REP_STOSB : I<0xAA, RawFrm, (outs), (ins), "{rep;stosb|rep stosb}",
[(X86rep_stos i8)]>, REP;
let Defs = [ECX,EDI], Uses = [AX,ECX,EDI], isCodeGenOnly = 1 in
def REP_STOSW : I<0xAB, RawFrm, (outs), (ins), "{rep;stosw|rep stosw}",
[(X86rep_stos i16)]>, REP, OpSize;
let Defs = [ECX,EDI], Uses = [EAX,ECX,EDI], isCodeGenOnly = 1 in
def REP_STOSD : I<0xAB, RawFrm, (outs), (ins), "{rep;stosl|rep stosd}",
[(X86rep_stos i32)]>, REP;
let Defs = [RCX,RDI], Uses = [RAX,RCX,RDI], isCodeGenOnly = 1 in
def REP_STOSQ : RI<0xAB, RawFrm, (outs), (ins), "{rep;stosq|rep stosq}",
[(X86rep_stos i64)]>, REP;
//===----------------------------------------------------------------------===//
// Thread Local Storage Instructions
//
// ELF TLS Support
// All calls clobber the non-callee saved registers. ESP is marked as
// a use to prevent stack-pointer assignments that appear immediately
// before calls from potentially appearing dead.
let Defs = [EAX, ECX, EDX, FP0, FP1, FP2, FP3, FP4, FP5, FP6, ST0,
MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7,
XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7,
XMM8, XMM9, XMM10, XMM11, XMM12, XMM13, XMM14, XMM15, EFLAGS],
Uses = [ESP] in
def TLS_addr32 : I<0, Pseudo, (outs), (ins i32mem:$sym),
"# TLS_addr32",
[(X86tlsaddr tls32addr:$sym)]>,
Requires<[In32BitMode]>;
// All calls clobber the non-callee saved registers. RSP is marked as
// a use to prevent stack-pointer assignments that appear immediately
// before calls from potentially appearing dead.
let Defs = [RAX, RCX, RDX, RSI, RDI, R8, R9, R10, R11,
FP0, FP1, FP2, FP3, FP4, FP5, FP6, ST0, ST1,
MM0, MM1, MM2, MM3, MM4, MM5, MM6, MM7,
XMM0, XMM1, XMM2, XMM3, XMM4, XMM5, XMM6, XMM7,
XMM8, XMM9, XMM10, XMM11, XMM12, XMM13, XMM14, XMM15, EFLAGS],
Uses = [RSP] in
def TLS_addr64 : I<0, Pseudo, (outs), (ins i64mem:$sym),
"# TLS_addr64",
[(X86tlsaddr tls64addr:$sym)]>,
Requires<[In64BitMode]>;
// Darwin TLS Support
// For i386, the address of the thunk is passed on the stack, on return the
// address of the variable is in %eax. %ecx is trashed during the function
// call. All other registers are preserved.
let Defs = [EAX, ECX, EFLAGS],
Uses = [ESP],
usesCustomInserter = 1 in
def TLSCall_32 : I<0, Pseudo, (outs), (ins i32mem:$sym),
"# TLSCall_32",
[(X86TLSCall addr:$sym)]>,
Requires<[In32BitMode]>;
// For x86_64, the address of the thunk is passed in %rdi, on return
// the address of the variable is in %rax. All other registers are preserved.
let Defs = [RAX, EFLAGS],
Uses = [RSP, RDI],
usesCustomInserter = 1 in
def TLSCall_64 : I<0, Pseudo, (outs), (ins i64mem:$sym),
"# TLSCall_64",
[(X86TLSCall addr:$sym)]>,
Requires<[In64BitMode]>;
//===----------------------------------------------------------------------===//
// Conditional Move Pseudo Instructions
// X86 doesn't have 8-bit conditional moves. Use a customInserter to
// emit control flow. An alternative to this is to mark i8 SELECT as Promote,
// however that requires promoting the operands, and can induce additional
// i8 register pressure.
let usesCustomInserter = 1, Uses = [EFLAGS] in {
def CMOV_GR8 : I<0, Pseudo,
(outs GR8:$dst), (ins GR8:$src1, GR8:$src2, i8imm:$cond),
"#CMOV_GR8 PSEUDO!",
[(set GR8:$dst, (X86cmov GR8:$src1, GR8:$src2,
imm:$cond, EFLAGS))]>;
let Predicates = [NoCMov] in {
def CMOV_GR32 : I<0, Pseudo,
(outs GR32:$dst), (ins GR32:$src1, GR32:$src2, i8imm:$cond),
"#CMOV_GR32* PSEUDO!",
[(set GR32:$dst,
(X86cmov GR32:$src1, GR32:$src2, imm:$cond, EFLAGS))]>;
def CMOV_GR16 : I<0, Pseudo,
(outs GR16:$dst), (ins GR16:$src1, GR16:$src2, i8imm:$cond),
"#CMOV_GR16* PSEUDO!",
[(set GR16:$dst,
(X86cmov GR16:$src1, GR16:$src2, imm:$cond, EFLAGS))]>;
def CMOV_RFP32 : I<0, Pseudo,
(outs RFP32:$dst),
(ins RFP32:$src1, RFP32:$src2, i8imm:$cond),
"#CMOV_RFP32 PSEUDO!",
[(set RFP32:$dst,
(X86cmov RFP32:$src1, RFP32:$src2, imm:$cond,
EFLAGS))]>;
def CMOV_RFP64 : I<0, Pseudo,
(outs RFP64:$dst),
(ins RFP64:$src1, RFP64:$src2, i8imm:$cond),
"#CMOV_RFP64 PSEUDO!",
[(set RFP64:$dst,
(X86cmov RFP64:$src1, RFP64:$src2, imm:$cond,
EFLAGS))]>;
def CMOV_RFP80 : I<0, Pseudo,
(outs RFP80:$dst),
(ins RFP80:$src1, RFP80:$src2, i8imm:$cond),
"#CMOV_RFP80 PSEUDO!",
[(set RFP80:$dst,
(X86cmov RFP80:$src1, RFP80:$src2, imm:$cond,
EFLAGS))]>;
} // Predicates = [NoCMov]
} // UsesCustomInserter = 1, Uses = [EFLAGS]
//===----------------------------------------------------------------------===//
// Atomic Instruction Pseudo Instructions
//===----------------------------------------------------------------------===//
// Atomic exchange, and, or, xor
let Constraints = "$val = $dst", Defs = [EFLAGS],
usesCustomInserter = 1 in {
def ATOMAND8 : I<0, Pseudo, (outs GR8:$dst),(ins i8mem:$ptr, GR8:$val),
"#ATOMAND8 PSEUDO!",
[(set GR8:$dst, (atomic_load_and_8 addr:$ptr, GR8:$val))]>;
def ATOMOR8 : I<0, Pseudo, (outs GR8:$dst),(ins i8mem:$ptr, GR8:$val),
"#ATOMOR8 PSEUDO!",
[(set GR8:$dst, (atomic_load_or_8 addr:$ptr, GR8:$val))]>;
def ATOMXOR8 : I<0, Pseudo,(outs GR8:$dst),(ins i8mem:$ptr, GR8:$val),
"#ATOMXOR8 PSEUDO!",
[(set GR8:$dst, (atomic_load_xor_8 addr:$ptr, GR8:$val))]>;
def ATOMNAND8 : I<0, Pseudo,(outs GR8:$dst),(ins i8mem:$ptr, GR8:$val),
"#ATOMNAND8 PSEUDO!",
[(set GR8:$dst, (atomic_load_nand_8 addr:$ptr, GR8:$val))]>;
def ATOMAND16 : I<0, Pseudo, (outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMAND16 PSEUDO!",
[(set GR16:$dst, (atomic_load_and_16 addr:$ptr, GR16:$val))]>;
def ATOMOR16 : I<0, Pseudo, (outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMOR16 PSEUDO!",
[(set GR16:$dst, (atomic_load_or_16 addr:$ptr, GR16:$val))]>;
def ATOMXOR16 : I<0, Pseudo,(outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMXOR16 PSEUDO!",
[(set GR16:$dst, (atomic_load_xor_16 addr:$ptr, GR16:$val))]>;
def ATOMNAND16 : I<0, Pseudo,(outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMNAND16 PSEUDO!",
[(set GR16:$dst, (atomic_load_nand_16 addr:$ptr, GR16:$val))]>;
def ATOMMIN16: I<0, Pseudo, (outs GR16:$dst), (ins i16mem:$ptr, GR16:$val),
"#ATOMMIN16 PSEUDO!",
[(set GR16:$dst, (atomic_load_min_16 addr:$ptr, GR16:$val))]>;
def ATOMMAX16: I<0, Pseudo, (outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMMAX16 PSEUDO!",
[(set GR16:$dst, (atomic_load_max_16 addr:$ptr, GR16:$val))]>;
def ATOMUMIN16: I<0, Pseudo, (outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMUMIN16 PSEUDO!",
[(set GR16:$dst, (atomic_load_umin_16 addr:$ptr, GR16:$val))]>;
def ATOMUMAX16: I<0, Pseudo, (outs GR16:$dst),(ins i16mem:$ptr, GR16:$val),
"#ATOMUMAX16 PSEUDO!",
[(set GR16:$dst, (atomic_load_umax_16 addr:$ptr, GR16:$val))]>;
def ATOMAND32 : I<0, Pseudo, (outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMAND32 PSEUDO!",
[(set GR32:$dst, (atomic_load_and_32 addr:$ptr, GR32:$val))]>;
def ATOMOR32 : I<0, Pseudo, (outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMOR32 PSEUDO!",
[(set GR32:$dst, (atomic_load_or_32 addr:$ptr, GR32:$val))]>;
def ATOMXOR32 : I<0, Pseudo,(outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMXOR32 PSEUDO!",
[(set GR32:$dst, (atomic_load_xor_32 addr:$ptr, GR32:$val))]>;
def ATOMNAND32 : I<0, Pseudo,(outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMNAND32 PSEUDO!",
[(set GR32:$dst, (atomic_load_nand_32 addr:$ptr, GR32:$val))]>;
def ATOMMIN32: I<0, Pseudo, (outs GR32:$dst), (ins i32mem:$ptr, GR32:$val),
"#ATOMMIN32 PSEUDO!",
[(set GR32:$dst, (atomic_load_min_32 addr:$ptr, GR32:$val))]>;
def ATOMMAX32: I<0, Pseudo, (outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMMAX32 PSEUDO!",
[(set GR32:$dst, (atomic_load_max_32 addr:$ptr, GR32:$val))]>;
def ATOMUMIN32: I<0, Pseudo, (outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMUMIN32 PSEUDO!",
[(set GR32:$dst, (atomic_load_umin_32 addr:$ptr, GR32:$val))]>;
def ATOMUMAX32: I<0, Pseudo, (outs GR32:$dst),(ins i32mem:$ptr, GR32:$val),
"#ATOMUMAX32 PSEUDO!",
[(set GR32:$dst, (atomic_load_umax_32 addr:$ptr, GR32:$val))]>;
def ATOMAND64 : I<0, Pseudo, (outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMAND64 PSEUDO!",
[(set GR64:$dst, (atomic_load_and_64 addr:$ptr, GR64:$val))]>;
def ATOMOR64 : I<0, Pseudo, (outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMOR64 PSEUDO!",
[(set GR64:$dst, (atomic_load_or_64 addr:$ptr, GR64:$val))]>;
def ATOMXOR64 : I<0, Pseudo,(outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMXOR64 PSEUDO!",
[(set GR64:$dst, (atomic_load_xor_64 addr:$ptr, GR64:$val))]>;
def ATOMNAND64 : I<0, Pseudo,(outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMNAND64 PSEUDO!",
[(set GR64:$dst, (atomic_load_nand_64 addr:$ptr, GR64:$val))]>;
def ATOMMIN64: I<0, Pseudo, (outs GR64:$dst), (ins i64mem:$ptr, GR64:$val),
"#ATOMMIN64 PSEUDO!",
[(set GR64:$dst, (atomic_load_min_64 addr:$ptr, GR64:$val))]>;
def ATOMMAX64: I<0, Pseudo, (outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMMAX64 PSEUDO!",
[(set GR64:$dst, (atomic_load_max_64 addr:$ptr, GR64:$val))]>;
def ATOMUMIN64: I<0, Pseudo, (outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMUMIN64 PSEUDO!",
[(set GR64:$dst, (atomic_load_umin_64 addr:$ptr, GR64:$val))]>;
def ATOMUMAX64: I<0, Pseudo, (outs GR64:$dst),(ins i64mem:$ptr, GR64:$val),
"#ATOMUMAX64 PSEUDO!",
[(set GR64:$dst, (atomic_load_umax_64 addr:$ptr, GR64:$val))]>;
}
let Constraints = "$val1 = $dst1, $val2 = $dst2",
Defs = [EFLAGS, EAX, EBX, ECX, EDX],
Uses = [EAX, EBX, ECX, EDX],
mayLoad = 1, mayStore = 1,
usesCustomInserter = 1 in {
def ATOMAND6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMAND6432 PSEUDO!", []>;
def ATOMOR6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMOR6432 PSEUDO!", []>;
def ATOMXOR6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMXOR6432 PSEUDO!", []>;
def ATOMNAND6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMNAND6432 PSEUDO!", []>;
def ATOMADD6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMADD6432 PSEUDO!", []>;
def ATOMSUB6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMSUB6432 PSEUDO!", []>;
def ATOMSWAP6432 : I<0, Pseudo, (outs GR32:$dst1, GR32:$dst2),
(ins i64mem:$ptr, GR32:$val1, GR32:$val2),
"#ATOMSWAP6432 PSEUDO!", []>;
}
//===----------------------------------------------------------------------===//
// Normal-Instructions-With-Lock-Prefix Pseudo Instructions
//===----------------------------------------------------------------------===//
// FIXME: Use normal instructions and add lock prefix dynamically.
// Memory barriers
// TODO: Get this to fold the constant into the instruction.
let isCodeGenOnly = 1 in
def OR32mrLocked : I<0x09, MRMDestMem, (outs), (ins i32mem:$dst, GR32:$zero),
"lock\n\t"
"or{l}\t{$zero, $dst|$dst, $zero}",
[]>, Requires<[In32BitMode]>, LOCK;
let hasSideEffects = 1 in
def Int_MemBarrier : I<0, Pseudo, (outs), (ins),
"#MEMBARRIER",
[(X86MemBarrier)]>;
// TODO: Get this to fold the constant into the instruction.
let hasSideEffects = 1, Defs = [ESP], isCodeGenOnly = 1 in
def Int_MemBarrierNoSSE64 : RI<0x09, MRM1r, (outs), (ins GR64:$zero),
"lock\n\t"
"or{q}\t{$zero, (%rsp)|(%rsp), $zero}",
[(X86MemBarrierNoSSE GR64:$zero)]>,
Requires<[In64BitMode]>, LOCK;
// RegOpc corresponds to the mr version of the instruction
// ImmOpc corresponds to the mi version of the instruction
// ImmOpc8 corresponds to the mi8 version of the instruction
// ImmMod corresponds to the instruction format of the mi and mi8 versions
multiclass LOCK_ArithBinOp<bits<8> RegOpc, bits<8> ImmOpc, bits<8> ImmOpc8,
Format ImmMod, string mnemonic> {
let Defs = [EFLAGS], mayLoad = 1, mayStore = 1, isCodeGenOnly = 1 in {
def #NAME#8mr : I<{RegOpc{7}, RegOpc{6}, RegOpc{5}, RegOpc{4},
RegOpc{3}, RegOpc{2}, RegOpc{1}, 0 },
MRMDestMem, (outs), (ins i8mem:$dst, GR8:$src2),
!strconcat("lock\n\t", mnemonic, "{b}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#16mr : I<{RegOpc{7}, RegOpc{6}, RegOpc{5}, RegOpc{4},
RegOpc{3}, RegOpc{2}, RegOpc{1}, 1 },
MRMDestMem, (outs), (ins i16mem:$dst, GR16:$src2),
!strconcat("lock\n\t", mnemonic, "{w}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, OpSize, LOCK;
def #NAME#32mr : I<{RegOpc{7}, RegOpc{6}, RegOpc{5}, RegOpc{4},
RegOpc{3}, RegOpc{2}, RegOpc{1}, 1 },
MRMDestMem, (outs), (ins i32mem:$dst, GR32:$src2),
!strconcat("lock\n\t", mnemonic, "{l}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#64mr : RI<{RegOpc{7}, RegOpc{6}, RegOpc{5}, RegOpc{4},
RegOpc{3}, RegOpc{2}, RegOpc{1}, 1 },
MRMDestMem, (outs), (ins i64mem:$dst, GR64:$src2),
!strconcat("lock\n\t", mnemonic, "{q}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#8mi : Ii8<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 0 },
ImmMod, (outs), (ins i8mem :$dst, i8imm :$src2),
!strconcat("lock\n\t", mnemonic, "{b}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#16mi : Ii16<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 1 },
ImmMod, (outs), (ins i16mem :$dst, i16imm :$src2),
!strconcat("lock\n\t", mnemonic, "{w}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#32mi : Ii32<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 1 },
ImmMod, (outs), (ins i32mem :$dst, i32imm :$src2),
!strconcat("lock\n\t", mnemonic, "{l}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#64mi32 : RIi32<{ImmOpc{7}, ImmOpc{6}, ImmOpc{5}, ImmOpc{4},
ImmOpc{3}, ImmOpc{2}, ImmOpc{1}, 1 },
ImmMod, (outs), (ins i64mem :$dst, i64i32imm :$src2),
!strconcat("lock\n\t", mnemonic, "{q}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#16mi8 : Ii8<{ImmOpc8{7}, ImmOpc8{6}, ImmOpc8{5}, ImmOpc8{4},
ImmOpc8{3}, ImmOpc8{2}, ImmOpc8{1}, 1 },
ImmMod, (outs), (ins i16mem :$dst, i16i8imm :$src2),
!strconcat("lock\n\t", mnemonic, "{w}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#32mi8 : Ii8<{ImmOpc8{7}, ImmOpc8{6}, ImmOpc8{5}, ImmOpc8{4},
ImmOpc8{3}, ImmOpc8{2}, ImmOpc8{1}, 1 },
ImmMod, (outs), (ins i32mem :$dst, i32i8imm :$src2),
!strconcat("lock\n\t", mnemonic, "{l}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
def #NAME#64mi8 : RIi8<{ImmOpc8{7}, ImmOpc8{6}, ImmOpc8{5}, ImmOpc8{4},
ImmOpc8{3}, ImmOpc8{2}, ImmOpc8{1}, 1 },
ImmMod, (outs), (ins i64mem :$dst, i64i8imm :$src2),
!strconcat("lock\n\t", mnemonic, "{q}\t",
"{$src2, $dst|$dst, $src2}"),
[]>, LOCK;
}
}
defm LOCK_ADD : LOCK_ArithBinOp<0x00, 0x80, 0x83, MRM0m, "add">;
defm LOCK_SUB : LOCK_ArithBinOp<0x28, 0x80, 0x83, MRM5m, "sub">;
defm LOCK_OR : LOCK_ArithBinOp<0x08, 0x80, 0x83, MRM1m, "or">;
defm LOCK_AND : LOCK_ArithBinOp<0x20, 0x80, 0x83, MRM4m, "and">;
defm LOCK_XOR : LOCK_ArithBinOp<0x30, 0x80, 0x83, MRM6m, "xor">;
// Optimized codegen when the non-memory output is not used.
let Defs = [EFLAGS], mayLoad = 1, mayStore = 1, isCodeGenOnly = 1 in {
def LOCK_INC8m : I<0xFE, MRM0m, (outs), (ins i8mem :$dst),
"lock\n\t"
"inc{b}\t$dst", []>, LOCK;
def LOCK_INC16m : I<0xFF, MRM0m, (outs), (ins i16mem:$dst),
"lock\n\t"
"inc{w}\t$dst", []>, OpSize, LOCK;
def LOCK_INC32m : I<0xFF, MRM0m, (outs), (ins i32mem:$dst),
"lock\n\t"
"inc{l}\t$dst", []>, LOCK;
def LOCK_INC64m : RI<0xFF, MRM0m, (outs), (ins i64mem:$dst),
"lock\n\t"
"inc{q}\t$dst", []>, LOCK;
def LOCK_DEC8m : I<0xFE, MRM1m, (outs), (ins i8mem :$dst),
"lock\n\t"
"dec{b}\t$dst", []>, LOCK;
def LOCK_DEC16m : I<0xFF, MRM1m, (outs), (ins i16mem:$dst),
"lock\n\t"
"dec{w}\t$dst", []>, OpSize, LOCK;
def LOCK_DEC32m : I<0xFF, MRM1m, (outs), (ins i32mem:$dst),
"lock\n\t"
"dec{l}\t$dst", []>, LOCK;
def LOCK_DEC64m : RI<0xFF, MRM1m, (outs), (ins i64mem:$dst),
"lock\n\t"
"dec{q}\t$dst", []>, LOCK;
}
// Atomic compare and swap.
let Defs = [EAX, EDX, EFLAGS], Uses = [EAX, EBX, ECX, EDX],
isCodeGenOnly = 1 in
def LCMPXCHG8B : I<0xC7, MRM1m, (outs), (ins i64mem:$ptr),
"lock\n\t"
"cmpxchg8b\t$ptr",
[(X86cas8 addr:$ptr)]>, TB, LOCK;
let Defs = [RAX, RDX, EFLAGS], Uses = [RAX, RBX, RCX, RDX],
isCodeGenOnly = 1 in
def LCMPXCHG16B : RI<0xC7, MRM1m, (outs), (ins i128mem:$ptr),
"lock\n\t"
"cmpxchg16b\t$ptr",
[(X86cas16 addr:$ptr)]>, TB, LOCK,
Requires<[HasCmpxchg16b]>;
let Defs = [AL, EFLAGS], Uses = [AL], isCodeGenOnly = 1 in {
def LCMPXCHG8 : I<0xB0, MRMDestMem, (outs), (ins i8mem:$ptr, GR8:$swap),
"lock\n\t"
"cmpxchg{b}\t{$swap, $ptr|$ptr, $swap}",
[(X86cas addr:$ptr, GR8:$swap, 1)]>, TB, LOCK;
}
let Defs = [AX, EFLAGS], Uses = [AX], isCodeGenOnly = 1 in {
def LCMPXCHG16 : I<0xB1, MRMDestMem, (outs), (ins i16mem:$ptr, GR16:$swap),
"lock\n\t"
"cmpxchg{w}\t{$swap, $ptr|$ptr, $swap}",
[(X86cas addr:$ptr, GR16:$swap, 2)]>, TB, OpSize, LOCK;
}
let Defs = [EAX, EFLAGS], Uses = [EAX], isCodeGenOnly = 1 in {
def LCMPXCHG32 : I<0xB1, MRMDestMem, (outs), (ins i32mem:$ptr, GR32:$swap),
"lock\n\t"
"cmpxchg{l}\t{$swap, $ptr|$ptr, $swap}",
[(X86cas addr:$ptr, GR32:$swap, 4)]>, TB, LOCK;
}
let Defs = [RAX, EFLAGS], Uses = [RAX], isCodeGenOnly = 1 in {
def LCMPXCHG64 : RI<0xB1, MRMDestMem, (outs), (ins i64mem:$ptr, GR64:$swap),
"lock\n\t"
"cmpxchg{q}\t{$swap, $ptr|$ptr, $swap}",
[(X86cas addr:$ptr, GR64:$swap, 8)]>, TB, LOCK;
}
// Atomic exchange and add
let Constraints = "$val = $dst", Defs = [EFLAGS], isCodeGenOnly = 1 in {
def LXADD8 : I<0xC0, MRMSrcMem, (outs GR8:$dst), (ins GR8:$val, i8mem:$ptr),
"lock\n\t"
"xadd{b}\t{$val, $ptr|$ptr, $val}",
[(set GR8:$dst, (atomic_load_add_8 addr:$ptr, GR8:$val))]>,
TB, LOCK;
def LXADD16 : I<0xC1, MRMSrcMem, (outs GR16:$dst), (ins GR16:$val, i16mem:$ptr),
"lock\n\t"
"xadd{w}\t{$val, $ptr|$ptr, $val}",
[(set GR16:$dst, (atomic_load_add_16 addr:$ptr, GR16:$val))]>,
TB, OpSize, LOCK;
def LXADD32 : I<0xC1, MRMSrcMem, (outs GR32:$dst), (ins GR32:$val, i32mem:$ptr),
"lock\n\t"
"xadd{l}\t{$val, $ptr|$ptr, $val}",
[(set GR32:$dst, (atomic_load_add_32 addr:$ptr, GR32:$val))]>,
TB, LOCK;
def LXADD64 : RI<0xC1, MRMSrcMem, (outs GR64:$dst), (ins GR64:$val,i64mem:$ptr),
"lock\n\t"
"xadd{q}\t{$val, $ptr|$ptr, $val}",
[(set GR64:$dst, (atomic_load_add_64 addr:$ptr, GR64:$val))]>,
TB, LOCK;
}
def ACQUIRE_MOV8rm : I<0, Pseudo, (outs GR8 :$dst), (ins i8mem :$src),
"#ACQUIRE_MOV PSEUDO!",
[(set GR8:$dst, (atomic_load_8 addr:$src))]>;
def ACQUIRE_MOV16rm : I<0, Pseudo, (outs GR16:$dst), (ins i16mem:$src),
"#ACQUIRE_MOV PSEUDO!",
[(set GR16:$dst, (atomic_load_16 addr:$src))]>;
def ACQUIRE_MOV32rm : I<0, Pseudo, (outs GR32:$dst), (ins i32mem:$src),
"#ACQUIRE_MOV PSEUDO!",
[(set GR32:$dst, (atomic_load_32 addr:$src))]>;
def ACQUIRE_MOV64rm : I<0, Pseudo, (outs GR64:$dst), (ins i64mem:$src),
"#ACQUIRE_MOV PSEUDO!",
[(set GR64:$dst, (atomic_load_64 addr:$src))]>;
def RELEASE_MOV8mr : I<0, Pseudo, (outs), (ins i8mem :$dst, GR8 :$src),
"#RELEASE_MOV PSEUDO!",
[(atomic_store_8 addr:$dst, GR8 :$src)]>;
def RELEASE_MOV16mr : I<0, Pseudo, (outs), (ins i16mem:$dst, GR16:$src),
"#RELEASE_MOV PSEUDO!",
[(atomic_store_16 addr:$dst, GR16:$src)]>;
def RELEASE_MOV32mr : I<0, Pseudo, (outs), (ins i32mem:$dst, GR32:$src),
"#RELEASE_MOV PSEUDO!",
[(atomic_store_32 addr:$dst, GR32:$src)]>;
def RELEASE_MOV64mr : I<0, Pseudo, (outs), (ins i64mem:$dst, GR64:$src),
"#RELEASE_MOV PSEUDO!",
[(atomic_store_64 addr:$dst, GR64:$src)]>;
//===----------------------------------------------------------------------===//
// Conditional Move Pseudo Instructions.
//===----------------------------------------------------------------------===//
// CMOV* - Used to implement the SSE SELECT DAG operation. Expanded after
// instruction selection into a branch sequence.
let Uses = [EFLAGS], usesCustomInserter = 1 in {
def CMOV_FR32 : I<0, Pseudo,
(outs FR32:$dst), (ins FR32:$t, FR32:$f, i8imm:$cond),
"#CMOV_FR32 PSEUDO!",
[(set FR32:$dst, (X86cmov FR32:$t, FR32:$f, imm:$cond,
EFLAGS))]>;
def CMOV_FR64 : I<0, Pseudo,
(outs FR64:$dst), (ins FR64:$t, FR64:$f, i8imm:$cond),
"#CMOV_FR64 PSEUDO!",
[(set FR64:$dst, (X86cmov FR64:$t, FR64:$f, imm:$cond,
EFLAGS))]>;
def CMOV_V4F32 : I<0, Pseudo,
(outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
"#CMOV_V4F32 PSEUDO!",
[(set VR128:$dst,
(v4f32 (X86cmov VR128:$t, VR128:$f, imm:$cond,
EFLAGS)))]>;
def CMOV_V2F64 : I<0, Pseudo,
(outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
"#CMOV_V2F64 PSEUDO!",
[(set VR128:$dst,
(v2f64 (X86cmov VR128:$t, VR128:$f, imm:$cond,
EFLAGS)))]>;
def CMOV_V2I64 : I<0, Pseudo,
(outs VR128:$dst), (ins VR128:$t, VR128:$f, i8imm:$cond),
"#CMOV_V2I64 PSEUDO!",
[(set VR128:$dst,
(v2i64 (X86cmov VR128:$t, VR128:$f, imm:$cond,
EFLAGS)))]>;
def CMOV_V8F32 : I<0, Pseudo,
(outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
"#CMOV_V8F32 PSEUDO!",
[(set VR256:$dst,
(v8f32 (X86cmov VR256:$t, VR256:$f, imm:$cond,
EFLAGS)))]>;
def CMOV_V4F64 : I<0, Pseudo,
(outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
"#CMOV_V4F64 PSEUDO!",
[(set VR256:$dst,
(v4f64 (X86cmov VR256:$t, VR256:$f, imm:$cond,
EFLAGS)))]>;
def CMOV_V4I64 : I<0, Pseudo,
(outs VR256:$dst), (ins VR256:$t, VR256:$f, i8imm:$cond),
"#CMOV_V4I64 PSEUDO!",
[(set VR256:$dst,
(v4i64 (X86cmov VR256:$t, VR256:$f, imm:$cond,
EFLAGS)))]>;
}
//===----------------------------------------------------------------------===//
// DAG Pattern Matching Rules
//===----------------------------------------------------------------------===//
// ConstantPool GlobalAddress, ExternalSymbol, and JumpTable
def : Pat<(i32 (X86Wrapper tconstpool :$dst)), (MOV32ri tconstpool :$dst)>;
def : Pat<(i32 (X86Wrapper tjumptable :$dst)), (MOV32ri tjumptable :$dst)>;
def : Pat<(i32 (X86Wrapper tglobaltlsaddr:$dst)),(MOV32ri tglobaltlsaddr:$dst)>;
def : Pat<(i32 (X86Wrapper tglobaladdr :$dst)), (MOV32ri tglobaladdr :$dst)>;
def : Pat<(i32 (X86Wrapper texternalsym:$dst)), (MOV32ri texternalsym:$dst)>;
def : Pat<(i32 (X86Wrapper tblockaddress:$dst)), (MOV32ri tblockaddress:$dst)>;
def : Pat<(add GR32:$src1, (X86Wrapper tconstpool:$src2)),
(ADD32ri GR32:$src1, tconstpool:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper tjumptable:$src2)),
(ADD32ri GR32:$src1, tjumptable:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper tglobaladdr :$src2)),
(ADD32ri GR32:$src1, tglobaladdr:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper texternalsym:$src2)),
(ADD32ri GR32:$src1, texternalsym:$src2)>;
def : Pat<(add GR32:$src1, (X86Wrapper tblockaddress:$src2)),
(ADD32ri GR32:$src1, tblockaddress:$src2)>;
def : Pat<(store (i32 (X86Wrapper tglobaladdr:$src)), addr:$dst),
(MOV32mi addr:$dst, tglobaladdr:$src)>;
def : Pat<(store (i32 (X86Wrapper texternalsym:$src)), addr:$dst),
(MOV32mi addr:$dst, texternalsym:$src)>;
def : Pat<(store (i32 (X86Wrapper tblockaddress:$src)), addr:$dst),
(MOV32mi addr:$dst, tblockaddress:$src)>;
// ConstantPool GlobalAddress, ExternalSymbol, and JumpTable when not in small
// code model mode, should use 'movabs'. FIXME: This is really a hack, the
// 'movabs' predicate should handle this sort of thing.
def : Pat<(i64 (X86Wrapper tconstpool :$dst)),
(MOV64ri tconstpool :$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper tjumptable :$dst)),
(MOV64ri tjumptable :$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper tglobaladdr :$dst)),
(MOV64ri tglobaladdr :$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper texternalsym:$dst)),
(MOV64ri texternalsym:$dst)>, Requires<[FarData]>;
def : Pat<(i64 (X86Wrapper tblockaddress:$dst)),
(MOV64ri tblockaddress:$dst)>, Requires<[FarData]>;
// In static codegen with small code model, we can get the address of a label
// into a register with 'movl'. FIXME: This is a hack, the 'imm' predicate of
// the MOV64ri64i32 should accept these.
def : Pat<(i64 (X86Wrapper tconstpool :$dst)),
(MOV64ri64i32 tconstpool :$dst)>, Requires<[SmallCode]>;
def : Pat<(i64 (X86Wrapper tjumptable :$dst)),
(MOV64ri64i32 tjumptable :$dst)>, Requires<[SmallCode]>;
def : Pat<(i64 (X86Wrapper tglobaladdr :$dst)),
(MOV64ri64i32 tglobaladdr :$dst)>, Requires<[SmallCode]>;
def : Pat<(i64 (X86Wrapper texternalsym:$dst)),
(MOV64ri64i32 texternalsym:$dst)>, Requires<[SmallCode]>;
def : Pat<(i64 (X86Wrapper tblockaddress:$dst)),
(MOV64ri64i32 tblockaddress:$dst)>, Requires<[SmallCode]>;
// In kernel code model, we can get the address of a label
// into a register with 'movq'. FIXME: This is a hack, the 'imm' predicate of
// the MOV64ri32 should accept these.
def : Pat<(i64 (X86Wrapper tconstpool :$dst)),
(MOV64ri32 tconstpool :$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper tjumptable :$dst)),
(MOV64ri32 tjumptable :$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper tglobaladdr :$dst)),
(MOV64ri32 tglobaladdr :$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper texternalsym:$dst)),
(MOV64ri32 texternalsym:$dst)>, Requires<[KernelCode]>;
def : Pat<(i64 (X86Wrapper tblockaddress:$dst)),
(MOV64ri32 tblockaddress:$dst)>, Requires<[KernelCode]>;
// If we have small model and -static mode, it is safe to store global addresses
// directly as immediates. FIXME: This is really a hack, the 'imm' predicate
// for MOV64mi32 should handle this sort of thing.
def : Pat<(store (i64 (X86Wrapper tconstpool:$src)), addr:$dst),
(MOV64mi32 addr:$dst, tconstpool:$src)>,
Requires<[NearData, IsStatic]>;
def : Pat<(store (i64 (X86Wrapper tjumptable:$src)), addr:$dst),
(MOV64mi32 addr:$dst, tjumptable:$src)>,
Requires<[NearData, IsStatic]>;
def : Pat<(store (i64 (X86Wrapper tglobaladdr:$src)), addr:$dst),
(MOV64mi32 addr:$dst, tglobaladdr:$src)>,
Requires<[NearData, IsStatic]>;
def : Pat<(store (i64 (X86Wrapper texternalsym:$src)), addr:$dst),
(MOV64mi32 addr:$dst, texternalsym:$src)>,
Requires<[NearData, IsStatic]>;
def : Pat<(store (i64 (X86Wrapper tblockaddress:$src)), addr:$dst),
(MOV64mi32 addr:$dst, tblockaddress:$src)>,
Requires<[NearData, IsStatic]>;
// Calls
// tls has some funny stuff here...
// This corresponds to movabs $foo@tpoff, %rax
def : Pat<(i64 (X86Wrapper tglobaltlsaddr :$dst)),
(MOV64ri tglobaltlsaddr :$dst)>;
// This corresponds to add $foo@tpoff, %rax
def : Pat<(add GR64:$src1, (X86Wrapper tglobaltlsaddr :$dst)),
(ADD64ri32 GR64:$src1, tglobaltlsaddr :$dst)>;
// This corresponds to mov foo@tpoff(%rbx), %eax
def : Pat<(load (i64 (X86Wrapper tglobaltlsaddr :$dst))),
(MOV64rm tglobaltlsaddr :$dst)>;
// Direct PC relative function call for small code model. 32-bit displacement
// sign extended to 64-bit.
def : Pat<(X86call (i64 tglobaladdr:$dst)),
(CALL64pcrel32 tglobaladdr:$dst)>, Requires<[NotWin64]>;
def : Pat<(X86call (i64 texternalsym:$dst)),
(CALL64pcrel32 texternalsym:$dst)>, Requires<[NotWin64]>;
def : Pat<(X86call (i64 tglobaladdr:$dst)),
(WINCALL64pcrel32 tglobaladdr:$dst)>, Requires<[IsWin64]>;
def : Pat<(X86call (i64 texternalsym:$dst)),
(WINCALL64pcrel32 texternalsym:$dst)>, Requires<[IsWin64]>;
// tailcall stuff
def : Pat<(X86tcret GR32_TC:$dst, imm:$off),
(TCRETURNri GR32_TC:$dst, imm:$off)>,
Requires<[In32BitMode]>;
// FIXME: This is disabled for 32-bit PIC mode because the global base
// register which is part of the address mode may be assigned a
// callee-saved register.
def : Pat<(X86tcret (load addr:$dst), imm:$off),
(TCRETURNmi addr:$dst, imm:$off)>,
Requires<[In32BitMode, IsNotPIC]>;
def : Pat<(X86tcret (i32 tglobaladdr:$dst), imm:$off),
(TCRETURNdi texternalsym:$dst, imm:$off)>,
Requires<[In32BitMode]>;
def : Pat<(X86tcret (i32 texternalsym:$dst), imm:$off),
(TCRETURNdi texternalsym:$dst, imm:$off)>,
Requires<[In32BitMode]>;
def : Pat<(X86tcret ptr_rc_tailcall:$dst, imm:$off),
(TCRETURNri64 ptr_rc_tailcall:$dst, imm:$off)>,
Requires<[In64BitMode]>;
def : Pat<(X86tcret (load addr:$dst), imm:$off),
(TCRETURNmi64 addr:$dst, imm:$off)>,
Requires<[In64BitMode]>;
def : Pat<(X86tcret (i64 tglobaladdr:$dst), imm:$off),
(TCRETURNdi64 tglobaladdr:$dst, imm:$off)>,
Requires<[In64BitMode]>;
def : Pat<(X86tcret (i64 texternalsym:$dst), imm:$off),
(TCRETURNdi64 texternalsym:$dst, imm:$off)>,
Requires<[In64BitMode]>;
// Normal calls, with various flavors of addresses.
def : Pat<(X86call (i32 tglobaladdr:$dst)),
(CALLpcrel32 tglobaladdr:$dst)>;
def : Pat<(X86call (i32 texternalsym:$dst)),
(CALLpcrel32 texternalsym:$dst)>;
def : Pat<(X86call (i32 imm:$dst)),
(CALLpcrel32 imm:$dst)>, Requires<[CallImmAddr]>;
// Comparisons.
// TEST R,R is smaller than CMP R,0
def : Pat<(X86cmp GR8:$src1, 0),
(TEST8rr GR8:$src1, GR8:$src1)>;
def : Pat<(X86cmp GR16:$src1, 0),
(TEST16rr GR16:$src1, GR16:$src1)>;
def : Pat<(X86cmp GR32:$src1, 0),
(TEST32rr GR32:$src1, GR32:$src1)>;
def : Pat<(X86cmp GR64:$src1, 0),
(TEST64rr GR64:$src1, GR64:$src1)>;
// Conditional moves with folded loads with operands swapped and conditions
// inverted.
multiclass CMOVmr<PatLeaf InvertedCond, Instruction Inst16, Instruction Inst32,
Instruction Inst64> {
def : Pat<(X86cmov (loadi16 addr:$src1), GR16:$src2, InvertedCond, EFLAGS),
(Inst16 GR16:$src2, addr:$src1)>;
def : Pat<(X86cmov (loadi32 addr:$src1), GR32:$src2, InvertedCond, EFLAGS),
(Inst32 GR32:$src2, addr:$src1)>;
def : Pat<(X86cmov (loadi64 addr:$src1), GR64:$src2, InvertedCond, EFLAGS),
(Inst64 GR64:$src2, addr:$src1)>;
}
defm : CMOVmr<X86_COND_B , CMOVAE16rm, CMOVAE32rm, CMOVAE64rm>;
defm : CMOVmr<X86_COND_AE, CMOVB16rm , CMOVB32rm , CMOVB64rm>;
defm : CMOVmr<X86_COND_E , CMOVNE16rm, CMOVNE32rm, CMOVNE64rm>;
defm : CMOVmr<X86_COND_NE, CMOVE16rm , CMOVE32rm , CMOVE64rm>;
defm : CMOVmr<X86_COND_BE, CMOVA16rm , CMOVA32rm , CMOVA64rm>;
defm : CMOVmr<X86_COND_A , CMOVBE16rm, CMOVBE32rm, CMOVBE64rm>;
defm : CMOVmr<X86_COND_L , CMOVGE16rm, CMOVGE32rm, CMOVGE64rm>;
defm : CMOVmr<X86_COND_GE, CMOVL16rm , CMOVL32rm , CMOVL64rm>;
defm : CMOVmr<X86_COND_LE, CMOVG16rm , CMOVG32rm , CMOVG64rm>;
defm : CMOVmr<X86_COND_G , CMOVLE16rm, CMOVLE32rm, CMOVLE64rm>;
defm : CMOVmr<X86_COND_P , CMOVNP16rm, CMOVNP32rm, CMOVNP64rm>;
defm : CMOVmr<X86_COND_NP, CMOVP16rm , CMOVP32rm , CMOVP64rm>;
defm : CMOVmr<X86_COND_S , CMOVNS16rm, CMOVNS32rm, CMOVNS64rm>;
defm : CMOVmr<X86_COND_NS, CMOVS16rm , CMOVS32rm , CMOVS64rm>;
defm : CMOVmr<X86_COND_O , CMOVNO16rm, CMOVNO32rm, CMOVNO64rm>;
defm : CMOVmr<X86_COND_NO, CMOVO16rm , CMOVO32rm , CMOVO64rm>;
// zextload bool -> zextload byte
def : Pat<(zextloadi8i1 addr:$src), (MOV8rm addr:$src)>;
def : Pat<(zextloadi16i1 addr:$src), (MOVZX16rm8 addr:$src)>;
def : Pat<(zextloadi32i1 addr:$src), (MOVZX32rm8 addr:$src)>;
def : Pat<(zextloadi64i1 addr:$src), (MOVZX64rm8 addr:$src)>;
// extload bool -> extload byte
// When extloading from 16-bit and smaller memory locations into 64-bit
// registers, use zero-extending loads so that the entire 64-bit register is
// defined, avoiding partial-register updates.
def : Pat<(extloadi8i1 addr:$src), (MOV8rm addr:$src)>;
def : Pat<(extloadi16i1 addr:$src), (MOVZX16rm8 addr:$src)>;
def : Pat<(extloadi32i1 addr:$src), (MOVZX32rm8 addr:$src)>;
def : Pat<(extloadi16i8 addr:$src), (MOVZX16rm8 addr:$src)>;
def : Pat<(extloadi32i8 addr:$src), (MOVZX32rm8 addr:$src)>;
def : Pat<(extloadi32i16 addr:$src), (MOVZX32rm16 addr:$src)>;
def : Pat<(extloadi64i1 addr:$src), (MOVZX64rm8 addr:$src)>;
def : Pat<(extloadi64i8 addr:$src), (MOVZX64rm8 addr:$src)>;
def : Pat<(extloadi64i16 addr:$src), (MOVZX64rm16 addr:$src)>;
// For other extloads, use subregs, since the high contents of the register are
// defined after an extload.
def : Pat<(extloadi64i32 addr:$src),
(SUBREG_TO_REG (i64 0), (MOV32rm addr:$src),
sub_32bit)>;
// anyext. Define these to do an explicit zero-extend to
// avoid partial-register updates.
def : Pat<(i16 (anyext GR8 :$src)), (EXTRACT_SUBREG
(MOVZX32rr8 GR8 :$src), sub_16bit)>;
def : Pat<(i32 (anyext GR8 :$src)), (MOVZX32rr8 GR8 :$src)>;
// Except for i16 -> i32 since isel expect i16 ops to be promoted to i32.
def : Pat<(i32 (anyext GR16:$src)),
(INSERT_SUBREG (i32 (IMPLICIT_DEF)), GR16:$src, sub_16bit)>;
def : Pat<(i64 (anyext GR8 :$src)), (MOVZX64rr8 GR8 :$src)>;
def : Pat<(i64 (anyext GR16:$src)), (MOVZX64rr16 GR16 :$src)>;
def : Pat<(i64 (anyext GR32:$src)),
(SUBREG_TO_REG (i64 0), GR32:$src, sub_32bit)>;
// Any instruction that defines a 32-bit result leaves the high half of the
// register. Truncate can be lowered to EXTRACT_SUBREG. CopyFromReg may
// be copying from a truncate. And x86's cmov doesn't do anything if the
// condition is false. But any other 32-bit operation will zero-extend
// up to 64 bits.
def def32 : PatLeaf<(i32 GR32:$src), [{
return N->getOpcode() != ISD::TRUNCATE &&
N->getOpcode() != TargetOpcode::EXTRACT_SUBREG &&
N->getOpcode() != ISD::CopyFromReg &&
N->getOpcode() != X86ISD::CMOV;
}]>;
// In the case of a 32-bit def that is known to implicitly zero-extend,
// we can use a SUBREG_TO_REG.
def : Pat<(i64 (zext def32:$src)),
(SUBREG_TO_REG (i64 0), GR32:$src, sub_32bit)>;
//===----------------------------------------------------------------------===//
// Pattern match OR as ADD
//===----------------------------------------------------------------------===//
// If safe, we prefer to pattern match OR as ADD at isel time. ADD can be
// 3-addressified into an LEA instruction to avoid copies. However, we also
// want to finally emit these instructions as an or at the end of the code
// generator to make the generated code easier to read. To do this, we select
// into "disjoint bits" pseudo ops.
// Treat an 'or' node is as an 'add' if the or'ed bits are known to be zero.
def or_is_add : PatFrag<(ops node:$lhs, node:$rhs), (or node:$lhs, node:$rhs),[{
if (ConstantSDNode *CN = dyn_cast<ConstantSDNode>(N->getOperand(1)))
return CurDAG->MaskedValueIsZero(N->getOperand(0), CN->getAPIntValue());
unsigned BitWidth = N->getValueType(0).getScalarType().getSizeInBits();
APInt Mask = APInt::getAllOnesValue(BitWidth);
APInt KnownZero0, KnownOne0;
CurDAG->ComputeMaskedBits(N->getOperand(0), Mask, KnownZero0, KnownOne0, 0);
APInt KnownZero1, KnownOne1;
CurDAG->ComputeMaskedBits(N->getOperand(1), Mask, KnownZero1, KnownOne1, 0);
return (~KnownZero0 & ~KnownZero1) == 0;
}]>;
// (or x1, x2) -> (add x1, x2) if two operands are known not to share bits.
let AddedComplexity = 5 in { // Try this before the selecting to OR
let isConvertibleToThreeAddress = 1,
Constraints = "$src1 = $dst", Defs = [EFLAGS] in {
let isCommutable = 1 in {
def ADD16rr_DB : I<0, Pseudo, (outs GR16:$dst), (ins GR16:$src1, GR16:$src2),
"", // orw/addw REG, REG
[(set GR16:$dst, (or_is_add GR16:$src1, GR16:$src2))]>;
def ADD32rr_DB : I<0, Pseudo, (outs GR32:$dst), (ins GR32:$src1, GR32:$src2),
"", // orl/addl REG, REG
[(set GR32:$dst, (or_is_add GR32:$src1, GR32:$src2))]>;
def ADD64rr_DB : I<0, Pseudo, (outs GR64:$dst), (ins GR64:$src1, GR64:$src2),
"", // orq/addq REG, REG
[(set GR64:$dst, (or_is_add GR64:$src1, GR64:$src2))]>;
} // isCommutable
// NOTE: These are order specific, we want the ri8 forms to be listed
// first so that they are slightly preferred to the ri forms.
def ADD16ri8_DB : I<0, Pseudo,
(outs GR16:$dst), (ins GR16:$src1, i16i8imm:$src2),
"", // orw/addw REG, imm8
[(set GR16:$dst,(or_is_add GR16:$src1,i16immSExt8:$src2))]>;
def ADD16ri_DB : I<0, Pseudo, (outs GR16:$dst), (ins GR16:$src1, i16imm:$src2),
"", // orw/addw REG, imm
[(set GR16:$dst, (or_is_add GR16:$src1, imm:$src2))]>;
def ADD32ri8_DB : I<0, Pseudo,
(outs GR32:$dst), (ins GR32:$src1, i32i8imm:$src2),
"", // orl/addl REG, imm8
[(set GR32:$dst,(or_is_add GR32:$src1,i32immSExt8:$src2))]>;
def ADD32ri_DB : I<0, Pseudo, (outs GR32:$dst), (ins GR32:$src1, i32imm:$src2),
"", // orl/addl REG, imm
[(set GR32:$dst, (or_is_add GR32:$src1, imm:$src2))]>;
def ADD64ri8_DB : I<0, Pseudo,
(outs GR64:$dst), (ins GR64:$src1, i64i8imm:$src2),
"", // orq/addq REG, imm8
[(set GR64:$dst, (or_is_add GR64:$src1,
i64immSExt8:$src2))]>;
def ADD64ri32_DB : I<0, Pseudo,
(outs GR64:$dst), (ins GR64:$src1, i64i32imm:$src2),
"", // orq/addq REG, imm
[(set GR64:$dst, (or_is_add GR64:$src1,
i64immSExt32:$src2))]>;
}
} // AddedComplexity
//===----------------------------------------------------------------------===//
// Some peepholes
//===----------------------------------------------------------------------===//
// Odd encoding trick: -128 fits into an 8-bit immediate field while
// +128 doesn't, so in this special case use a sub instead of an add.
def : Pat<(add GR16:$src1, 128),
(SUB16ri8 GR16:$src1, -128)>;
def : Pat<(store (add (loadi16 addr:$dst), 128), addr:$dst),
(SUB16mi8 addr:$dst, -128)>;
def : Pat<(add GR32:$src1, 128),
(SUB32ri8 GR32:$src1, -128)>;
def : Pat<(store (add (loadi32 addr:$dst), 128), addr:$dst),
(SUB32mi8 addr:$dst, -128)>;
def : Pat<(add GR64:$src1, 128),
(SUB64ri8 GR64:$src1, -128)>;
def : Pat<(store (add (loadi64 addr:$dst), 128), addr:$dst),
(SUB64mi8 addr:$dst, -128)>;
// The same trick applies for 32-bit immediate fields in 64-bit
// instructions.
def : Pat<(add GR64:$src1, 0x0000000080000000),
(SUB64ri32 GR64:$src1, 0xffffffff80000000)>;
def : Pat<(store (add (loadi64 addr:$dst), 0x00000000800000000), addr:$dst),
(SUB64mi32 addr:$dst, 0xffffffff80000000)>;
// To avoid needing to materialize an immediate in a register, use a 32-bit and
// with implicit zero-extension instead of a 64-bit and if the immediate has at
// least 32 bits of leading zeros. If in addition the last 32 bits can be
// represented with a sign extension of a 8 bit constant, use that.
def : Pat<(and GR64:$src, i64immZExt32SExt8:$imm),
(SUBREG_TO_REG
(i64 0),
(AND32ri8
(EXTRACT_SUBREG GR64:$src, sub_32bit),
(i32 (GetLo8XForm imm:$imm))),
sub_32bit)>;
def : Pat<(and GR64:$src, i64immZExt32:$imm),
(SUBREG_TO_REG
(i64 0),
(AND32ri
(EXTRACT_SUBREG GR64:$src, sub_32bit),
(i32 (GetLo32XForm imm:$imm))),
sub_32bit)>;
// r & (2^16-1) ==> movz
def : Pat<(and GR32:$src1, 0xffff),
(MOVZX32rr16 (EXTRACT_SUBREG GR32:$src1, sub_16bit))>;
// r & (2^8-1) ==> movz
def : Pat<(and GR32:$src1, 0xff),
(MOVZX32rr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src1,
GR32_ABCD)),
sub_8bit))>,
Requires<[In32BitMode]>;
// r & (2^8-1) ==> movz
def : Pat<(and GR16:$src1, 0xff),
(EXTRACT_SUBREG (MOVZX32rr8 (EXTRACT_SUBREG
(i16 (COPY_TO_REGCLASS GR16:$src1, GR16_ABCD)), sub_8bit)),
sub_16bit)>,
Requires<[In32BitMode]>;
// r & (2^32-1) ==> movz
def : Pat<(and GR64:$src, 0x00000000FFFFFFFF),
(MOVZX64rr32 (EXTRACT_SUBREG GR64:$src, sub_32bit))>;
// r & (2^16-1) ==> movz
def : Pat<(and GR64:$src, 0xffff),
(MOVZX64rr16 (i16 (EXTRACT_SUBREG GR64:$src, sub_16bit)))>;
// r & (2^8-1) ==> movz
def : Pat<(and GR64:$src, 0xff),
(MOVZX64rr8 (i8 (EXTRACT_SUBREG GR64:$src, sub_8bit)))>;
// r & (2^8-1) ==> movz
def : Pat<(and GR32:$src1, 0xff),
(MOVZX32rr8 (EXTRACT_SUBREG GR32:$src1, sub_8bit))>,
Requires<[In64BitMode]>;
// r & (2^8-1) ==> movz
def : Pat<(and GR16:$src1, 0xff),
(EXTRACT_SUBREG (MOVZX32rr8 (i8
(EXTRACT_SUBREG GR16:$src1, sub_8bit))), sub_16bit)>,
Requires<[In64BitMode]>;
// sext_inreg patterns
def : Pat<(sext_inreg GR32:$src, i16),
(MOVSX32rr16 (EXTRACT_SUBREG GR32:$src, sub_16bit))>;
def : Pat<(sext_inreg GR32:$src, i8),
(MOVSX32rr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src,
GR32_ABCD)),
sub_8bit))>,
Requires<[In32BitMode]>;
def : Pat<(sext_inreg GR16:$src, i8),
(EXTRACT_SUBREG (i32 (MOVSX32rr8 (EXTRACT_SUBREG
(i32 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)), sub_8bit))),
sub_16bit)>,
Requires<[In32BitMode]>;
def : Pat<(sext_inreg GR64:$src, i32),
(MOVSX64rr32 (EXTRACT_SUBREG GR64:$src, sub_32bit))>;
def : Pat<(sext_inreg GR64:$src, i16),
(MOVSX64rr16 (EXTRACT_SUBREG GR64:$src, sub_16bit))>;
def : Pat<(sext_inreg GR64:$src, i8),
(MOVSX64rr8 (EXTRACT_SUBREG GR64:$src, sub_8bit))>;
def : Pat<(sext_inreg GR32:$src, i8),
(MOVSX32rr8 (EXTRACT_SUBREG GR32:$src, sub_8bit))>,
Requires<[In64BitMode]>;
def : Pat<(sext_inreg GR16:$src, i8),
(EXTRACT_SUBREG (MOVSX32rr8
(EXTRACT_SUBREG GR16:$src, sub_8bit)), sub_16bit)>,
Requires<[In64BitMode]>;
// sext, sext_load, zext, zext_load
def: Pat<(i16 (sext GR8:$src)),
(EXTRACT_SUBREG (MOVSX32rr8 GR8:$src), sub_16bit)>;
def: Pat<(sextloadi16i8 addr:$src),
(EXTRACT_SUBREG (MOVSX32rm8 addr:$src), sub_16bit)>;
def: Pat<(i16 (zext GR8:$src)),
(EXTRACT_SUBREG (MOVZX32rr8 GR8:$src), sub_16bit)>;
def: Pat<(zextloadi16i8 addr:$src),
(EXTRACT_SUBREG (MOVZX32rm8 addr:$src), sub_16bit)>;
// trunc patterns
def : Pat<(i16 (trunc GR32:$src)),
(EXTRACT_SUBREG GR32:$src, sub_16bit)>;
def : Pat<(i8 (trunc GR32:$src)),
(EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src, GR32_ABCD)),
sub_8bit)>,
Requires<[In32BitMode]>;
def : Pat<(i8 (trunc GR16:$src)),
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit)>,
Requires<[In32BitMode]>;
def : Pat<(i32 (trunc GR64:$src)),
(EXTRACT_SUBREG GR64:$src, sub_32bit)>;
def : Pat<(i16 (trunc GR64:$src)),
(EXTRACT_SUBREG GR64:$src, sub_16bit)>;
def : Pat<(i8 (trunc GR64:$src)),
(EXTRACT_SUBREG GR64:$src, sub_8bit)>;
def : Pat<(i8 (trunc GR32:$src)),
(EXTRACT_SUBREG GR32:$src, sub_8bit)>,
Requires<[In64BitMode]>;
def : Pat<(i8 (trunc GR16:$src)),
(EXTRACT_SUBREG GR16:$src, sub_8bit)>,
Requires<[In64BitMode]>;
// h-register tricks
def : Pat<(i8 (trunc (srl_su GR16:$src, (i8 8)))),
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi)>,
Requires<[In32BitMode]>;
def : Pat<(i8 (trunc (srl_su GR32:$src, (i8 8)))),
(EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src, GR32_ABCD)),
sub_8bit_hi)>,
Requires<[In32BitMode]>;
def : Pat<(srl GR16:$src, (i8 8)),
(EXTRACT_SUBREG
(MOVZX32rr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi)),
sub_16bit)>,
Requires<[In32BitMode]>;
def : Pat<(i32 (zext (srl_su GR16:$src, (i8 8)))),
(MOVZX32rr8 (EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src,
GR16_ABCD)),
sub_8bit_hi))>,
Requires<[In32BitMode]>;
def : Pat<(i32 (anyext (srl_su GR16:$src, (i8 8)))),
(MOVZX32rr8 (EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src,
GR16_ABCD)),
sub_8bit_hi))>,
Requires<[In32BitMode]>;
def : Pat<(and (srl_su GR32:$src, (i8 8)), (i32 255)),
(MOVZX32rr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src,
GR32_ABCD)),
sub_8bit_hi))>,
Requires<[In32BitMode]>;
def : Pat<(srl (and_su GR32:$src, 0xff00), (i8 8)),
(MOVZX32rr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src,
GR32_ABCD)),
sub_8bit_hi))>,
Requires<[In32BitMode]>;
// h-register tricks.
// For now, be conservative on x86-64 and use an h-register extract only if the
// value is immediately zero-extended or stored, which are somewhat common
// cases. This uses a bunch of code to prevent a register requiring a REX prefix
// from being allocated in the same instruction as the h register, as there's
// currently no way to describe this requirement to the register allocator.
// h-register extract and zero-extend.
def : Pat<(and (srl_su GR64:$src, (i8 8)), (i64 255)),
(SUBREG_TO_REG
(i64 0),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i64 (COPY_TO_REGCLASS GR64:$src, GR64_ABCD)),
sub_8bit_hi)),
sub_32bit)>;
def : Pat<(and (srl_su GR32:$src, (i8 8)), (i32 255)),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src, GR32_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
def : Pat<(srl (and_su GR32:$src, 0xff00), (i8 8)),
(MOVZX32_NOREXrr8 (EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src,
GR32_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
def : Pat<(srl GR16:$src, (i8 8)),
(EXTRACT_SUBREG
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi)),
sub_16bit)>,
Requires<[In64BitMode]>;
def : Pat<(i32 (zext (srl_su GR16:$src, (i8 8)))),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
def : Pat<(i32 (anyext (srl_su GR16:$src, (i8 8)))),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
def : Pat<(i64 (zext (srl_su GR16:$src, (i8 8)))),
(SUBREG_TO_REG
(i64 0),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi)),
sub_32bit)>;
def : Pat<(i64 (anyext (srl_su GR16:$src, (i8 8)))),
(SUBREG_TO_REG
(i64 0),
(MOVZX32_NOREXrr8
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi)),
sub_32bit)>;
// h-register extract and store.
def : Pat<(store (i8 (trunc_su (srl_su GR64:$src, (i8 8)))), addr:$dst),
(MOV8mr_NOREX
addr:$dst,
(EXTRACT_SUBREG (i64 (COPY_TO_REGCLASS GR64:$src, GR64_ABCD)),
sub_8bit_hi))>;
def : Pat<(store (i8 (trunc_su (srl_su GR32:$src, (i8 8)))), addr:$dst),
(MOV8mr_NOREX
addr:$dst,
(EXTRACT_SUBREG (i32 (COPY_TO_REGCLASS GR32:$src, GR32_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
def : Pat<(store (i8 (trunc_su (srl_su GR16:$src, (i8 8)))), addr:$dst),
(MOV8mr_NOREX
addr:$dst,
(EXTRACT_SUBREG (i16 (COPY_TO_REGCLASS GR16:$src, GR16_ABCD)),
sub_8bit_hi))>,
Requires<[In64BitMode]>;
// (shl x, 1) ==> (add x, x)
// Note that if x is undef (immediate or otherwise), we could theoretically
// end up with the two uses of x getting different values, producing a result
// where the least significant bit is not 0. However, the probability of this
// happening is considered low enough that this is officially not a
// "real problem".
def : Pat<(shl GR8 :$src1, (i8 1)), (ADD8rr GR8 :$src1, GR8 :$src1)>;
def : Pat<(shl GR16:$src1, (i8 1)), (ADD16rr GR16:$src1, GR16:$src1)>;
def : Pat<(shl GR32:$src1, (i8 1)), (ADD32rr GR32:$src1, GR32:$src1)>;
def : Pat<(shl GR64:$src1, (i8 1)), (ADD64rr GR64:$src1, GR64:$src1)>;
// (shl x (and y, 31)) ==> (shl x, y)
def : Pat<(shl GR8:$src1, (and CL, 31)),
(SHL8rCL GR8:$src1)>;
def : Pat<(shl GR16:$src1, (and CL, 31)),
(SHL16rCL GR16:$src1)>;
def : Pat<(shl GR32:$src1, (and CL, 31)),
(SHL32rCL GR32:$src1)>;
def : Pat<(store (shl (loadi8 addr:$dst), (and CL, 31)), addr:$dst),
(SHL8mCL addr:$dst)>;
def : Pat<(store (shl (loadi16 addr:$dst), (and CL, 31)), addr:$dst),
(SHL16mCL addr:$dst)>;
def : Pat<(store (shl (loadi32 addr:$dst), (and CL, 31)), addr:$dst),
(SHL32mCL addr:$dst)>;
def : Pat<(srl GR8:$src1, (and CL, 31)),
(SHR8rCL GR8:$src1)>;
def : Pat<(srl GR16:$src1, (and CL, 31)),
(SHR16rCL GR16:$src1)>;
def : Pat<(srl GR32:$src1, (and CL, 31)),
(SHR32rCL GR32:$src1)>;
def : Pat<(store (srl (loadi8 addr:$dst), (and CL, 31)), addr:$dst),
(SHR8mCL addr:$dst)>;
def : Pat<(store (srl (loadi16 addr:$dst), (and CL, 31)), addr:$dst),
(SHR16mCL addr:$dst)>;
def : Pat<(store (srl (loadi32 addr:$dst), (and CL, 31)), addr:$dst),
(SHR32mCL addr:$dst)>;
def : Pat<(sra GR8:$src1, (and CL, 31)),
(SAR8rCL GR8:$src1)>;
def : Pat<(sra GR16:$src1, (and CL, 31)),
(SAR16rCL GR16:$src1)>;
def : Pat<(sra GR32:$src1, (and CL, 31)),
(SAR32rCL GR32:$src1)>;
def : Pat<(store (sra (loadi8 addr:$dst), (and CL, 31)), addr:$dst),
(SAR8mCL addr:$dst)>;
def : Pat<(store (sra (loadi16 addr:$dst), (and CL, 31)), addr:$dst),
(SAR16mCL addr:$dst)>;
def : Pat<(store (sra (loadi32 addr:$dst), (and CL, 31)), addr:$dst),
(SAR32mCL addr:$dst)>;
// (shl x (and y, 63)) ==> (shl x, y)
def : Pat<(shl GR64:$src1, (and CL, 63)),
(SHL64rCL GR64:$src1)>;
def : Pat<(store (shl (loadi64 addr:$dst), (and CL, 63)), addr:$dst),
(SHL64mCL addr:$dst)>;
def : Pat<(srl GR64:$src1, (and CL, 63)),
(SHR64rCL GR64:$src1)>;
def : Pat<(store (srl (loadi64 addr:$dst), (and CL, 63)), addr:$dst),
(SHR64mCL addr:$dst)>;
def : Pat<(sra GR64:$src1, (and CL, 63)),
(SAR64rCL GR64:$src1)>;
def : Pat<(store (sra (loadi64 addr:$dst), (and CL, 63)), addr:$dst),
(SAR64mCL addr:$dst)>;
// (anyext (setcc_carry)) -> (setcc_carry)
def : Pat<(i16 (anyext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C16r)>;
def : Pat<(i32 (anyext (i8 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C32r)>;
def : Pat<(i32 (anyext (i16 (X86setcc_c X86_COND_B, EFLAGS)))),
(SETB_C32r)>;
//===----------------------------------------------------------------------===//
// EFLAGS-defining Patterns
//===----------------------------------------------------------------------===//
// add reg, reg
def : Pat<(add GR8 :$src1, GR8 :$src2), (ADD8rr GR8 :$src1, GR8 :$src2)>;
def : Pat<(add GR16:$src1, GR16:$src2), (ADD16rr GR16:$src1, GR16:$src2)>;
def : Pat<(add GR32:$src1, GR32:$src2), (ADD32rr GR32:$src1, GR32:$src2)>;
// add reg, mem
def : Pat<(add GR8:$src1, (loadi8 addr:$src2)),
(ADD8rm GR8:$src1, addr:$src2)>;
def : Pat<(add GR16:$src1, (loadi16 addr:$src2)),
(ADD16rm GR16:$src1, addr:$src2)>;
def : Pat<(add GR32:$src1, (loadi32 addr:$src2)),
(ADD32rm GR32:$src1, addr:$src2)>;
// add reg, imm
def : Pat<(add GR8 :$src1, imm:$src2), (ADD8ri GR8:$src1 , imm:$src2)>;
def : Pat<(add GR16:$src1, imm:$src2), (ADD16ri GR16:$src1, imm:$src2)>;
def : Pat<(add GR32:$src1, imm:$src2), (ADD32ri GR32:$src1, imm:$src2)>;
def : Pat<(add GR16:$src1, i16immSExt8:$src2),
(ADD16ri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(add GR32:$src1, i32immSExt8:$src2),
(ADD32ri8 GR32:$src1, i32immSExt8:$src2)>;
// sub reg, reg
def : Pat<(sub GR8 :$src1, GR8 :$src2), (SUB8rr GR8 :$src1, GR8 :$src2)>;
def : Pat<(sub GR16:$src1, GR16:$src2), (SUB16rr GR16:$src1, GR16:$src2)>;
def : Pat<(sub GR32:$src1, GR32:$src2), (SUB32rr GR32:$src1, GR32:$src2)>;
// sub reg, mem
def : Pat<(sub GR8:$src1, (loadi8 addr:$src2)),
(SUB8rm GR8:$src1, addr:$src2)>;
def : Pat<(sub GR16:$src1, (loadi16 addr:$src2)),
(SUB16rm GR16:$src1, addr:$src2)>;
def : Pat<(sub GR32:$src1, (loadi32 addr:$src2)),
(SUB32rm GR32:$src1, addr:$src2)>;
// sub reg, imm
def : Pat<(sub GR8:$src1, imm:$src2),
(SUB8ri GR8:$src1, imm:$src2)>;
def : Pat<(sub GR16:$src1, imm:$src2),
(SUB16ri GR16:$src1, imm:$src2)>;
def : Pat<(sub GR32:$src1, imm:$src2),
(SUB32ri GR32:$src1, imm:$src2)>;
def : Pat<(sub GR16:$src1, i16immSExt8:$src2),
(SUB16ri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(sub GR32:$src1, i32immSExt8:$src2),
(SUB32ri8 GR32:$src1, i32immSExt8:$src2)>;
// mul reg, reg
def : Pat<(mul GR16:$src1, GR16:$src2),
(IMUL16rr GR16:$src1, GR16:$src2)>;
def : Pat<(mul GR32:$src1, GR32:$src2),
(IMUL32rr GR32:$src1, GR32:$src2)>;
// mul reg, mem
def : Pat<(mul GR16:$src1, (loadi16 addr:$src2)),
(IMUL16rm GR16:$src1, addr:$src2)>;
def : Pat<(mul GR32:$src1, (loadi32 addr:$src2)),
(IMUL32rm GR32:$src1, addr:$src2)>;
// mul reg, imm
def : Pat<(mul GR16:$src1, imm:$src2),
(IMUL16rri GR16:$src1, imm:$src2)>;
def : Pat<(mul GR32:$src1, imm:$src2),
(IMUL32rri GR32:$src1, imm:$src2)>;
def : Pat<(mul GR16:$src1, i16immSExt8:$src2),
(IMUL16rri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(mul GR32:$src1, i32immSExt8:$src2),
(IMUL32rri8 GR32:$src1, i32immSExt8:$src2)>;
// reg = mul mem, imm
def : Pat<(mul (loadi16 addr:$src1), imm:$src2),
(IMUL16rmi addr:$src1, imm:$src2)>;
def : Pat<(mul (loadi32 addr:$src1), imm:$src2),
(IMUL32rmi addr:$src1, imm:$src2)>;
def : Pat<(mul (loadi16 addr:$src1), i16immSExt8:$src2),
(IMUL16rmi8 addr:$src1, i16immSExt8:$src2)>;
def : Pat<(mul (loadi32 addr:$src1), i32immSExt8:$src2),
(IMUL32rmi8 addr:$src1, i32immSExt8:$src2)>;
// Patterns for nodes that do not produce flags, for instructions that do.
// addition
def : Pat<(add GR64:$src1, GR64:$src2),
(ADD64rr GR64:$src1, GR64:$src2)>;
def : Pat<(add GR64:$src1, i64immSExt8:$src2),
(ADD64ri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(add GR64:$src1, i64immSExt32:$src2),
(ADD64ri32 GR64:$src1, i64immSExt32:$src2)>;
def : Pat<(add GR64:$src1, (loadi64 addr:$src2)),
(ADD64rm GR64:$src1, addr:$src2)>;
// subtraction
def : Pat<(sub GR64:$src1, GR64:$src2),
(SUB64rr GR64:$src1, GR64:$src2)>;
def : Pat<(sub GR64:$src1, (loadi64 addr:$src2)),
(SUB64rm GR64:$src1, addr:$src2)>;
def : Pat<(sub GR64:$src1, i64immSExt8:$src2),
(SUB64ri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(sub GR64:$src1, i64immSExt32:$src2),
(SUB64ri32 GR64:$src1, i64immSExt32:$src2)>;
// Multiply
def : Pat<(mul GR64:$src1, GR64:$src2),
(IMUL64rr GR64:$src1, GR64:$src2)>;
def : Pat<(mul GR64:$src1, (loadi64 addr:$src2)),
(IMUL64rm GR64:$src1, addr:$src2)>;
def : Pat<(mul GR64:$src1, i64immSExt8:$src2),
(IMUL64rri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(mul GR64:$src1, i64immSExt32:$src2),
(IMUL64rri32 GR64:$src1, i64immSExt32:$src2)>;
def : Pat<(mul (loadi64 addr:$src1), i64immSExt8:$src2),
(IMUL64rmi8 addr:$src1, i64immSExt8:$src2)>;
def : Pat<(mul (loadi64 addr:$src1), i64immSExt32:$src2),
(IMUL64rmi32 addr:$src1, i64immSExt32:$src2)>;
// Increment reg.
def : Pat<(add GR8 :$src, 1), (INC8r GR8 :$src)>;
def : Pat<(add GR16:$src, 1), (INC16r GR16:$src)>, Requires<[In32BitMode]>;
def : Pat<(add GR16:$src, 1), (INC64_16r GR16:$src)>, Requires<[In64BitMode]>;
def : Pat<(add GR32:$src, 1), (INC32r GR32:$src)>, Requires<[In32BitMode]>;
def : Pat<(add GR32:$src, 1), (INC64_32r GR32:$src)>, Requires<[In64BitMode]>;
def : Pat<(add GR64:$src, 1), (INC64r GR64:$src)>;
// Decrement reg.
def : Pat<(add GR8 :$src, -1), (DEC8r GR8 :$src)>;
def : Pat<(add GR16:$src, -1), (DEC16r GR16:$src)>, Requires<[In32BitMode]>;
def : Pat<(add GR16:$src, -1), (DEC64_16r GR16:$src)>, Requires<[In64BitMode]>;
def : Pat<(add GR32:$src, -1), (DEC32r GR32:$src)>, Requires<[In32BitMode]>;
def : Pat<(add GR32:$src, -1), (DEC64_32r GR32:$src)>, Requires<[In64BitMode]>;
def : Pat<(add GR64:$src, -1), (DEC64r GR64:$src)>;
// or reg/reg.
def : Pat<(or GR8 :$src1, GR8 :$src2), (OR8rr GR8 :$src1, GR8 :$src2)>;
def : Pat<(or GR16:$src1, GR16:$src2), (OR16rr GR16:$src1, GR16:$src2)>;
def : Pat<(or GR32:$src1, GR32:$src2), (OR32rr GR32:$src1, GR32:$src2)>;
def : Pat<(or GR64:$src1, GR64:$src2), (OR64rr GR64:$src1, GR64:$src2)>;
// or reg/mem
def : Pat<(or GR8:$src1, (loadi8 addr:$src2)),
(OR8rm GR8:$src1, addr:$src2)>;
def : Pat<(or GR16:$src1, (loadi16 addr:$src2)),
(OR16rm GR16:$src1, addr:$src2)>;
def : Pat<(or GR32:$src1, (loadi32 addr:$src2)),
(OR32rm GR32:$src1, addr:$src2)>;
def : Pat<(or GR64:$src1, (loadi64 addr:$src2)),
(OR64rm GR64:$src1, addr:$src2)>;
// or reg/imm
def : Pat<(or GR8:$src1 , imm:$src2), (OR8ri GR8 :$src1, imm:$src2)>;
def : Pat<(or GR16:$src1, imm:$src2), (OR16ri GR16:$src1, imm:$src2)>;
def : Pat<(or GR32:$src1, imm:$src2), (OR32ri GR32:$src1, imm:$src2)>;
def : Pat<(or GR16:$src1, i16immSExt8:$src2),
(OR16ri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(or GR32:$src1, i32immSExt8:$src2),
(OR32ri8 GR32:$src1, i32immSExt8:$src2)>;
def : Pat<(or GR64:$src1, i64immSExt8:$src2),
(OR64ri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(or GR64:$src1, i64immSExt32:$src2),
(OR64ri32 GR64:$src1, i64immSExt32:$src2)>;
// xor reg/reg
def : Pat<(xor GR8 :$src1, GR8 :$src2), (XOR8rr GR8 :$src1, GR8 :$src2)>;
def : Pat<(xor GR16:$src1, GR16:$src2), (XOR16rr GR16:$src1, GR16:$src2)>;
def : Pat<(xor GR32:$src1, GR32:$src2), (XOR32rr GR32:$src1, GR32:$src2)>;
def : Pat<(xor GR64:$src1, GR64:$src2), (XOR64rr GR64:$src1, GR64:$src2)>;
// xor reg/mem
def : Pat<(xor GR8:$src1, (loadi8 addr:$src2)),
(XOR8rm GR8:$src1, addr:$src2)>;
def : Pat<(xor GR16:$src1, (loadi16 addr:$src2)),
(XOR16rm GR16:$src1, addr:$src2)>;
def : Pat<(xor GR32:$src1, (loadi32 addr:$src2)),
(XOR32rm GR32:$src1, addr:$src2)>;
def : Pat<(xor GR64:$src1, (loadi64 addr:$src2)),
(XOR64rm GR64:$src1, addr:$src2)>;
// xor reg/imm
def : Pat<(xor GR8:$src1, imm:$src2),
(XOR8ri GR8:$src1, imm:$src2)>;
def : Pat<(xor GR16:$src1, imm:$src2),
(XOR16ri GR16:$src1, imm:$src2)>;
def : Pat<(xor GR32:$src1, imm:$src2),
(XOR32ri GR32:$src1, imm:$src2)>;
def : Pat<(xor GR16:$src1, i16immSExt8:$src2),
(XOR16ri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(xor GR32:$src1, i32immSExt8:$src2),
(XOR32ri8 GR32:$src1, i32immSExt8:$src2)>;
def : Pat<(xor GR64:$src1, i64immSExt8:$src2),
(XOR64ri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(xor GR64:$src1, i64immSExt32:$src2),
(XOR64ri32 GR64:$src1, i64immSExt32:$src2)>;
// and reg/reg
def : Pat<(and GR8 :$src1, GR8 :$src2), (AND8rr GR8 :$src1, GR8 :$src2)>;
def : Pat<(and GR16:$src1, GR16:$src2), (AND16rr GR16:$src1, GR16:$src2)>;
def : Pat<(and GR32:$src1, GR32:$src2), (AND32rr GR32:$src1, GR32:$src2)>;
def : Pat<(and GR64:$src1, GR64:$src2), (AND64rr GR64:$src1, GR64:$src2)>;
// and reg/mem
def : Pat<(and GR8:$src1, (loadi8 addr:$src2)),
(AND8rm GR8:$src1, addr:$src2)>;
def : Pat<(and GR16:$src1, (loadi16 addr:$src2)),
(AND16rm GR16:$src1, addr:$src2)>;
def : Pat<(and GR32:$src1, (loadi32 addr:$src2)),
(AND32rm GR32:$src1, addr:$src2)>;
def : Pat<(and GR64:$src1, (loadi64 addr:$src2)),
(AND64rm GR64:$src1, addr:$src2)>;
// and reg/imm
def : Pat<(and GR8:$src1, imm:$src2),
(AND8ri GR8:$src1, imm:$src2)>;
def : Pat<(and GR16:$src1, imm:$src2),
(AND16ri GR16:$src1, imm:$src2)>;
def : Pat<(and GR32:$src1, imm:$src2),
(AND32ri GR32:$src1, imm:$src2)>;
def : Pat<(and GR16:$src1, i16immSExt8:$src2),
(AND16ri8 GR16:$src1, i16immSExt8:$src2)>;
def : Pat<(and GR32:$src1, i32immSExt8:$src2),
(AND32ri8 GR32:$src1, i32immSExt8:$src2)>;
def : Pat<(and GR64:$src1, i64immSExt8:$src2),
(AND64ri8 GR64:$src1, i64immSExt8:$src2)>;
def : Pat<(and GR64:$src1, i64immSExt32:$src2),
(AND64ri32 GR64:$src1, i64immSExt32:$src2)>;
// Bit scan instruction patterns to match explicit zero-undef behavior.
def : Pat<(cttz_zero_undef GR16:$src), (BSF16rr GR16:$src)>;
def : Pat<(cttz_zero_undef GR32:$src), (BSF32rr GR32:$src)>;
def : Pat<(cttz_zero_undef GR64:$src), (BSF64rr GR64:$src)>;
def : Pat<(cttz_zero_undef (loadi16 addr:$src)), (BSF16rm addr:$src)>;
def : Pat<(cttz_zero_undef (loadi32 addr:$src)), (BSF32rm addr:$src)>;
def : Pat<(cttz_zero_undef (loadi64 addr:$src)), (BSF64rm addr:$src)>;