llvm-6502/lib/Target/PowerPC/InstPrinter/PPCInstPrinter.cpp
Hal Finkel ab849adec4 [PowerPC] Initial support for the VSX instruction set
VSX is an ISA extension supported on the POWER7 and later cores that enhances
floating-point vector and scalar capabilities. Among other things, this adds
<2 x double> support and generally helps to reduce register pressure.

The interesting part of this ISA feature is the register configuration: there
are 64 new 128-bit vector registers, the 32 of which are super-registers of the
existing 32 scalar floating-point registers, and the second 32 of which overlap
with the 32 Altivec vector registers. This makes things like vector insertion
and extraction tricky: this can be free but only if we force a restriction to
the right register subclass when needed. A new "minipass" PPCVSXCopy takes care
of this (although it could do a more-optimal job of it; see the comment about
unnecessary copies below).

Please note that, currently, VSX is not enabled by default when targeting
anything because it is not yet ready for that.  The assembler and disassembler
are fully implemented and tested. However:

 - CodeGen support causes miscompiles; test-suite runtime failures:
      MultiSource/Benchmarks/FreeBench/distray/distray
      MultiSource/Benchmarks/McCat/08-main/main
      MultiSource/Benchmarks/Olden/voronoi/voronoi
      MultiSource/Benchmarks/mafft/pairlocalalign
      MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
      SingleSource/Benchmarks/CoyoteBench/almabench
      SingleSource/Benchmarks/Misc/matmul_f64_4x4

 - The lowering currently falls back to using Altivec instructions far more
   than it should. Worse, there are some things that are scalarized through the
   stack that shouldn't be.

 - A lot of unnecessary copies make it past the optimizers, and this needs to
   be fixed.

 - Many more regression tests are needed.

Normally, I'd fix these things prior to committing, but there are some
students and other contributors who would like to work this, and so it makes
sense to move this development process upstream where it can be subject to the
regular code-review procedures.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
2014-03-13 07:58:58 +00:00

358 lines
10 KiB
C++

//===-- PPCInstPrinter.cpp - Convert PPC MCInst to assembly syntax --------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This class prints an PPC MCInst to a .s file.
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "asm-printer"
#include "PPCInstPrinter.h"
#include "MCTargetDesc/PPCMCTargetDesc.h"
#include "MCTargetDesc/PPCPredicates.h"
#include "llvm/MC/MCExpr.h"
#include "llvm/MC/MCInst.h"
#include "llvm/MC/MCInstrInfo.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Target/TargetOpcodes.h"
using namespace llvm;
// FIXME: Once the integrated assembler supports full register names, tie this
// to the verbose-asm setting.
static cl::opt<bool>
FullRegNames("ppc-asm-full-reg-names", cl::Hidden, cl::init(false),
cl::desc("Use full register names when printing assembly"));
#include "PPCGenAsmWriter.inc"
void PPCInstPrinter::printRegName(raw_ostream &OS, unsigned RegNo) const {
OS << getRegisterName(RegNo);
}
void PPCInstPrinter::printInst(const MCInst *MI, raw_ostream &O,
StringRef Annot) {
// Check for slwi/srwi mnemonics.
if (MI->getOpcode() == PPC::RLWINM) {
unsigned char SH = MI->getOperand(2).getImm();
unsigned char MB = MI->getOperand(3).getImm();
unsigned char ME = MI->getOperand(4).getImm();
bool useSubstituteMnemonic = false;
if (SH <= 31 && MB == 0 && ME == (31-SH)) {
O << "\tslwi "; useSubstituteMnemonic = true;
}
if (SH <= 31 && MB == (32-SH) && ME == 31) {
O << "\tsrwi "; useSubstituteMnemonic = true;
SH = 32-SH;
}
if (useSubstituteMnemonic) {
printOperand(MI, 0, O);
O << ", ";
printOperand(MI, 1, O);
O << ", " << (unsigned int)SH;
printAnnotation(O, Annot);
return;
}
}
if ((MI->getOpcode() == PPC::OR || MI->getOpcode() == PPC::OR8) &&
MI->getOperand(1).getReg() == MI->getOperand(2).getReg()) {
O << "\tmr ";
printOperand(MI, 0, O);
O << ", ";
printOperand(MI, 1, O);
printAnnotation(O, Annot);
return;
}
if (MI->getOpcode() == PPC::RLDICR) {
unsigned char SH = MI->getOperand(2).getImm();
unsigned char ME = MI->getOperand(3).getImm();
// rldicr RA, RS, SH, 63-SH == sldi RA, RS, SH
if (63-SH == ME) {
O << "\tsldi ";
printOperand(MI, 0, O);
O << ", ";
printOperand(MI, 1, O);
O << ", " << (unsigned int)SH;
printAnnotation(O, Annot);
return;
}
}
// For fast-isel, a COPY_TO_REGCLASS may survive this long. This is
// used when converting a 32-bit float to a 64-bit float as part of
// conversion to an integer (see PPCFastISel.cpp:SelectFPToI()),
// as otherwise we have problems with incorrect register classes
// in machine instruction verification. For now, just avoid trying
// to print it as such an instruction has no effect (a 32-bit float
// in a register is already in 64-bit form, just with lower
// precision). FIXME: Is there a better solution?
if (MI->getOpcode() == TargetOpcode::COPY_TO_REGCLASS)
return;
printInstruction(MI, O);
printAnnotation(O, Annot);
}
void PPCInstPrinter::printPredicateOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O,
const char *Modifier) {
unsigned Code = MI->getOperand(OpNo).getImm();
if (StringRef(Modifier) == "cc") {
switch ((PPC::Predicate)Code) {
case PPC::PRED_LT_MINUS:
case PPC::PRED_LT_PLUS:
case PPC::PRED_LT:
O << "lt";
return;
case PPC::PRED_LE_MINUS:
case PPC::PRED_LE_PLUS:
case PPC::PRED_LE:
O << "le";
return;
case PPC::PRED_EQ_MINUS:
case PPC::PRED_EQ_PLUS:
case PPC::PRED_EQ:
O << "eq";
return;
case PPC::PRED_GE_MINUS:
case PPC::PRED_GE_PLUS:
case PPC::PRED_GE:
O << "ge";
return;
case PPC::PRED_GT_MINUS:
case PPC::PRED_GT_PLUS:
case PPC::PRED_GT:
O << "gt";
return;
case PPC::PRED_NE_MINUS:
case PPC::PRED_NE_PLUS:
case PPC::PRED_NE:
O << "ne";
return;
case PPC::PRED_UN_MINUS:
case PPC::PRED_UN_PLUS:
case PPC::PRED_UN:
O << "un";
return;
case PPC::PRED_NU_MINUS:
case PPC::PRED_NU_PLUS:
case PPC::PRED_NU:
O << "nu";
return;
case PPC::PRED_BIT_SET:
case PPC::PRED_BIT_UNSET:
llvm_unreachable("Invalid use of bit predicate code");
}
llvm_unreachable("Invalid predicate code");
}
if (StringRef(Modifier) == "pm") {
switch ((PPC::Predicate)Code) {
case PPC::PRED_LT:
case PPC::PRED_LE:
case PPC::PRED_EQ:
case PPC::PRED_GE:
case PPC::PRED_GT:
case PPC::PRED_NE:
case PPC::PRED_UN:
case PPC::PRED_NU:
return;
case PPC::PRED_LT_MINUS:
case PPC::PRED_LE_MINUS:
case PPC::PRED_EQ_MINUS:
case PPC::PRED_GE_MINUS:
case PPC::PRED_GT_MINUS:
case PPC::PRED_NE_MINUS:
case PPC::PRED_UN_MINUS:
case PPC::PRED_NU_MINUS:
O << "-";
return;
case PPC::PRED_LT_PLUS:
case PPC::PRED_LE_PLUS:
case PPC::PRED_EQ_PLUS:
case PPC::PRED_GE_PLUS:
case PPC::PRED_GT_PLUS:
case PPC::PRED_NE_PLUS:
case PPC::PRED_UN_PLUS:
case PPC::PRED_NU_PLUS:
O << "+";
return;
case PPC::PRED_BIT_SET:
case PPC::PRED_BIT_UNSET:
llvm_unreachable("Invalid use of bit predicate code");
}
llvm_unreachable("Invalid predicate code");
}
assert(StringRef(Modifier) == "reg" &&
"Need to specify 'cc', 'pm' or 'reg' as predicate op modifier!");
printOperand(MI, OpNo+1, O);
}
void PPCInstPrinter::printU2ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
unsigned int Value = MI->getOperand(OpNo).getImm();
assert(Value <= 3 && "Invalid u2imm argument!");
O << (unsigned int)Value;
}
void PPCInstPrinter::printS5ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
int Value = MI->getOperand(OpNo).getImm();
Value = SignExtend32<5>(Value);
O << (int)Value;
}
void PPCInstPrinter::printU5ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
unsigned int Value = MI->getOperand(OpNo).getImm();
assert(Value <= 31 && "Invalid u5imm argument!");
O << (unsigned int)Value;
}
void PPCInstPrinter::printU6ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
unsigned int Value = MI->getOperand(OpNo).getImm();
assert(Value <= 63 && "Invalid u6imm argument!");
O << (unsigned int)Value;
}
void PPCInstPrinter::printS16ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
if (MI->getOperand(OpNo).isImm())
O << (short)MI->getOperand(OpNo).getImm();
else
printOperand(MI, OpNo, O);
}
void PPCInstPrinter::printU16ImmOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
if (MI->getOperand(OpNo).isImm())
O << (unsigned short)MI->getOperand(OpNo).getImm();
else
printOperand(MI, OpNo, O);
}
void PPCInstPrinter::printBranchOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
if (!MI->getOperand(OpNo).isImm())
return printOperand(MI, OpNo, O);
// Branches can take an immediate operand. This is used by the branch
// selection pass to print .+8, an eight byte displacement from the PC.
O << ".+";
printAbsBranchOperand(MI, OpNo, O);
}
void PPCInstPrinter::printAbsBranchOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
if (!MI->getOperand(OpNo).isImm())
return printOperand(MI, OpNo, O);
O << (int)MI->getOperand(OpNo).getImm()*4;
}
void PPCInstPrinter::printcrbitm(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
unsigned CCReg = MI->getOperand(OpNo).getReg();
unsigned RegNo;
switch (CCReg) {
default: llvm_unreachable("Unknown CR register");
case PPC::CR0: RegNo = 0; break;
case PPC::CR1: RegNo = 1; break;
case PPC::CR2: RegNo = 2; break;
case PPC::CR3: RegNo = 3; break;
case PPC::CR4: RegNo = 4; break;
case PPC::CR5: RegNo = 5; break;
case PPC::CR6: RegNo = 6; break;
case PPC::CR7: RegNo = 7; break;
}
O << (0x80 >> RegNo);
}
void PPCInstPrinter::printMemRegImm(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
printS16ImmOperand(MI, OpNo, O);
O << '(';
if (MI->getOperand(OpNo+1).getReg() == PPC::R0)
O << "0";
else
printOperand(MI, OpNo+1, O);
O << ')';
}
void PPCInstPrinter::printMemRegReg(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
// When used as the base register, r0 reads constant zero rather than
// the value contained in the register. For this reason, the darwin
// assembler requires that we print r0 as 0 (no r) when used as the base.
if (MI->getOperand(OpNo).getReg() == PPC::R0)
O << "0";
else
printOperand(MI, OpNo, O);
O << ", ";
printOperand(MI, OpNo+1, O);
}
void PPCInstPrinter::printTLSCall(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
printBranchOperand(MI, OpNo, O);
O << '(';
printOperand(MI, OpNo+1, O);
O << ')';
}
/// stripRegisterPrefix - This method strips the character prefix from a
/// register name so that only the number is left. Used by for linux asm.
static const char *stripRegisterPrefix(const char *RegName) {
if (FullRegNames)
return RegName;
switch (RegName[0]) {
case 'r':
case 'f':
case 'v':
if (RegName[1] == 's')
return RegName + 2;
return RegName + 1;
case 'c': if (RegName[1] == 'r') return RegName + 2;
}
return RegName;
}
void PPCInstPrinter::printOperand(const MCInst *MI, unsigned OpNo,
raw_ostream &O) {
const MCOperand &Op = MI->getOperand(OpNo);
if (Op.isReg()) {
const char *RegName = getRegisterName(Op.getReg());
// The linux and AIX assembler does not take register prefixes.
if (!isDarwinSyntax())
RegName = stripRegisterPrefix(RegName);
O << RegName;
return;
}
if (Op.isImm()) {
O << Op.getImm();
return;
}
assert(Op.isExpr() && "unknown operand kind in printOperand");
O << *Op.getExpr();
}