llvm-6502/Makefile.common

331 lines
11 KiB
Makefile

#===-- Makefile.common - Common make rules for LLVM -------*- makefile -*--====
#
# This file is included by all of the LLVM makefiles. This file defines common
# rules to do things like compile a .cpp file or generate dependancy info.
# These are platform dependant, so this is the file used to specify these
# system dependant operations.
#
# The following functionality may be set by setting incoming variables:
#
# 1. LEVEL - The level of the current subdirectory from the top of the
# MagicStats view. This level should be expressed as a path, for
# example, ../.. for two levels deep.
#
# 2. DIRS - A list of subdirectories to be built. Fake targets are set up
# so that each of the targets "all", "install", and "clean" each build.
# the subdirectories before the local target.
#
# 3. Source - If specified, this sets the source code filenames. If this
# is not set, it defaults to be all of the .cpp, .c, .y, and .l files
# in the current directory. Also, if you want to build files in addition
# to the local files, you can use the ExtraSource variable
#
#===-----------------------------------------------------------------------====
# These are options that can either be enabled here, or can be enabled on the
# make command line (make ENABLE_PROFILING=1)
#
#ENABLE_PROFILING = 1
#ENABLE_PURIFY = 1
#ENABLE_OPTIMIZED = 1
ifdef SHARED_LIBRARY
# if SHARED_LIBRARY is specified, the default is to build the dynamic lib
dynamic ::
endif
# Default Rule: Make sure it's also a :: rule
all ::
# Default for install is to at least build everything...
install ::
#--------------------------------------------------------------------
# Installation configuration options...
#--------------------------------------------------------------------
#BinInstDir=/usr/local/bin
#LibInstDir=/usrl/local/lib/xxx
#DocInstDir=/usr/doc/xxx
BURG = /home/vadve/vadve/Research/DynOpt/Burg/burg
BURG_OPTS = -I
PURIFY = /usr/dcs/applications/purify/bin/purify -cache-dir="$(HOME)/purifycache" -chain-length="30" -messages=all
# Shorthand for commonly accessed directories
LIBDEBUG = $(LEVEL)/lib/Debug
LIBRELEASE = $(LEVEL)/lib/Release
TOOLDEBUG = $(LEVEL)/tools/Debug
TOOLRELEASE = $(LEVEL)/tools/Release
#---------------------------------------------------------
# Compilation options...
#---------------------------------------------------------
# Special tools used while building
RunBurg = $(BURG) $(BURG_OPTS)
# Enable this for profiling support with 'gprof'
ifdef ENABLE_PROFILING
PROFILE = -pg
else
PROFILE =
endif
# TODO: Get rid of exceptions! : -fno-exceptions -fno-rtti
# -Wno-unused-parameter
CompileCommonOpts = $(PROFILE) -Wall -W -Wwrite-strings -Wno-unused -I$(LEVEL)/include
# Compile a file, don't link...
Compile = $(CXX) -c $(CPPFLAGS) $(CXXFLAGS) $(CompileCommonOpts) $(PROFILE)
CompileG = $(Compile) -g -D_DEBUG
CompileO = $(Compile) -O3 -DNDEBUG -finline-functions -felide-constructors -fnonnull-objects -freg-struct-return -fshort-enums
# Link final executable
# To enable purify, do it here:
ifdef ENABLE_PURIFY
Link = $(PURIFY) $(CXX) $(Prof) -static
else
Link = LD_RUN_PATH=/usr/dcs/software/evaluation/encap/gcc-3.0.4/lib $(CXX) $(PROFILE)
endif
LinkG = $(Link) -g -L $(LIBDEBUG)
LinkO = $(Link) -O3 -L $(LIBRELEASE)
# Create a .so file from a .o files...
#MakeSO = $(CXX) -shared $(Prof)
MakeSO = $(CXX) -G $(Prof)
MakeSOO = $(MakeSO) -O3
# Create one .o file from a bunch of .o files...
Relink = ld -r
# Create dependancy file from CPP file, send to stdout.
Depend = $(CXX) -MM -I$(LEVEL)/include $(CPPFLAGS)
# Archive a bunch of .o files into a .a file...
AR = ar cq
MakeLib = $(AR)
#----------------------------------------------------------
# Source includes all of the cpp files, and objects are derived from the
# source files...
# The local Makefile can list other Source files via ExtraSource = ...
#
Source := $(ExtraSource) $(wildcard *.cpp *.c *.y *.l)
Objs := $(sort $(addsuffix .o,$(basename $(Source))))
ObjectsO = $(addprefix Release/,$(Objs))
ObjectsG = $(addprefix Debug/,$(Objs))
#---------------------------------------------------------
# Handle the DIRS option
#---------------------------------------------------------
ifdef DIRS # Only do this if we're using DIRS!
all :: $(addsuffix /.makeall , $(DIRS))
install :: $(addsuffix /.makeinstall, $(DIRS))
clean :: $(addsuffix /.makeclean , $(DIRS))
%/.makeall %/.makeclean %/.makeinstall:
cd $(@D); $(MAKE) $(subst $(@D)/.make,,$@)
endif
#---------------------------------------------------------
# Handle the LIBRARYNAME option - used when building libs...
#---------------------------------------------------------
#
# When libraries are built, they are allowed to optionally define the
# DONT_BUILD_RELINKED make variable, which, when defined, prevents a .o file
# from being built for the library. This .o files may then be linked to by a
# tool if the tool does not need (or want) the semantics a .a file provides
# (linking in only object files that are "needed"). If a library is never to
# be used in this way, it is better to define DONT_BUILD_RELINKED, and define
# BUILD_ARCHIVE instead.
#
# Some libraries must be built as .a files (libscalar for example) because if
# it's built as a .o file, then all of the constitent .o files in it will be
# linked into tools (for example gccas) even if they only use one of the parts
# of it. For this reason, sometimes it's useful to use libraries as .a files.
ifdef LIBRARYNAME
LIBNAME_O := $(LIBRELEASE)/lib$(LIBRARYNAME).so
LIBNAME_G := $(LIBDEBUG)/lib$(LIBRARYNAME).so
LIBNAME_AO := $(LIBRELEASE)/lib$(LIBRARYNAME).a
LIBNAME_AG := $(LIBDEBUG)/lib$(LIBRARYNAME).a
LIBNAME_OBJO := $(LIBRELEASE)/$(LIBRARYNAME).o
LIBNAME_OBJG := $(LIBDEBUG)/$(LIBRARYNAME).o
BUILD_LIBNAME_G := $(LIBNAME_G)
ifndef DONT_BUILD_RELINKED
BUILD_LIBNAME_OBJG := $(LIBNAME_OBJG)
endif
ifdef BUILD_ARCHIVE
BUILD_LIBNAME_AG := $(LIBNAME_AG)
endif
# If optimized builds are enabled...
ifdef ENABLE_OPTIMIZED
BUILD_LIBNAME_O := $(LIBNAME_O)
ifndef DONT_BUILD_RELINKED
BUILD_LIBNAME_OBJO := $(LIBNAME_OBJO)
endif
ifdef BUILD_ARCHIVE
BUILD_LIBNAME_AO := $(LIBNAME_AO)
endif
endif
all:: $(BUILD_LIBNAME_AG) $(BUILD_LIBNAME_OBJG) # Debug
all:: $(BUILD_LIBNAME_AO) $(BUILD_LIBNAME_OBJO) # Release
dynamic:: $(BUILD_LIBNAME_G) $(BUILD_LIBNAME_O) # .so files
$(LIBNAME_O): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir Depend/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
$(MakeSOO) -o $@ $(ObjectsO) $(LibSubDirs) $(LibLinkOpts)
$(LIBNAME_G): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir Depend/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
$(MakeSO) -g -o $@ $(ObjectsG) $(LibSubDirs) $(LibLinkOpts)
$(LIBNAME_AO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir Depend/.dir
@echo ======= Linking $(LIBRARYNAME) release library =======
@rm -f $@
$(MakeLib) $@ $(ObjectsO) $(LibSubDirs)
$(LIBNAME_AG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir Depend/.dir
@echo ======= Linking $(LIBRARYNAME) debug library =======
@rm -f $@
$(MakeLib) $@ $(ObjectsG) $(LibSubDirs)
$(LIBNAME_OBJO): $(ObjectsO) $(LibSubDirs) $(LIBRELEASE)/.dir Depend/.dir
$(Relink) -o $@ $(ObjectsO) $(LibSubDirs)
$(LIBNAME_OBJG): $(ObjectsG) $(LibSubDirs) $(LIBDEBUG)/.dir Depend/.dir
$(Relink) -o $@ $(ObjectsG) $(LibSubDirs)
endif
#------------------------------------------------------------------------
# Create a TAGS database for emacs
#------------------------------------------------------------------------
ifeq ($(LEVEL), .)
tags:
etags -l c++ `find include lib tools -name '*.cpp' -o -name '*.h'`
all:: tags
endif
#------------------------------------------------------------------------
# Handle the TOOLNAME option - used when building tool executables...
#------------------------------------------------------------------------
#
# The TOOLNAME option should be used with a USEDLIBS variable that tells the
# libraries (and the order of the libs) that should be linked to the
# tool. USEDLIBS should contain a list of library names (some with .a extension)
# that are automatically linked in as .o files unless the .a suffix is added.
#
ifdef TOOLNAME
# TOOLEXENAME* - These compute the output filenames to generate...
TOOLEXENAME_G = $(LEVEL)/tools/Debug/$(TOOLNAME)
TOOLEXENAME_O = $(LEVEL)/tools/Release/$(TOOLNAME)
TOOLEXENAMES := $(TOOLEXENAME_G)
ifdef ENABLE_OPTIMIZED
TOOLEXENAMES += $(TOOLEXENAME_O)
endif
# USED_LIBS_OPTIONS - Compute the options line that add -llib1 -llib2, etc.
USED_LIBS_OPTIONS := $(patsubst %.a.o, -l%, $(addsuffix .o, $(USEDLIBS)))
USED_LIBS_OPTIONS_G := $(patsubst %.o, $(LIBDEBUG)/%.o, $(USED_LIBS_OPTIONS))
USED_LIBS_OPTIONS_O := $(patsubst %.o, $(LIBRELEASE)/%.o,$(USED_LIBS_OPTIONS))
# USED_LIB_PATHS - Compute the path of the libraries used so that tools are
# rebuilt if libraries change. This has to make sure to handle .a/.so and .o
# files seperately.
#
STATICUSEDLIBS := $(patsubst %.a.o, lib%.a, $(addsuffix .o, $(USEDLIBS)))
USED_LIB_PATHS_G := $(addprefix $(LIBDEBUG)/, $(STATICUSEDLIBS))
USED_LIB_PATHS_O := $(addprefix $(LIBRELEASE)/, $(STATICUSEDLIBS))
all:: $(TOOLEXENAMES)
clean::
rm -f $(TOOLEXENAMES)
$(TOOLEXENAME_G): $(ObjectsG) $(USED_LIB_PATHS_G) $(LEVEL)/tools/Debug/.dir
$(LinkG) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_G) $(TOOLLINKOPTS)
$(TOOLEXENAME_O): $(ObjectsO) $(USED_LIB_PATHS_O) $(LEVEL)/tools/Release/.dir
$(LinkO) -o $@ $(ObjectsG) $(USED_LIBS_OPTIONS_O) $(TOOLLINKOPTS)
endif
#---------------------------------------------------------
.PRECIOUS: Depend/.dir Debug/.dir Release/.dir
# Create dependencies for the *.cpp files...
Depend/%.d: %.cpp Depend/.dir
$(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
# Create dependencies for the *.c files...
Depend/%.d: %.c Depend/.dir
$(Depend) $< | sed 's|$*\.o *|Release/& Debug/& Depend/$(@F)|g' > $@
# Create .o files in the ObjectFiles directory from the .cpp and .c files...
Release/%.o: %.cpp Release/.dir Depend/.dir
$(CompileO) $< -o $@
#Release/%.o: %.c Release/.dir Depend/.dir
# $(CompileOC) $< -o $@
Debug/%.o: %.cpp Debug/.dir Depend/.dir
$(CompileG) $< -o $@
#Debug/%.o: %.c Debug/.dir Depend/.dir
# $(CompileGC) $< -o $@
# Create a .cpp source file from a burg input file
%.burm.cpp: Debug/%.burg Debug/.dir
$(RunBurg) $< -o $@
# Create a .cpp source file from a flex input file... this uses sed to cut down
# on the warnings emited by GCC...
%.cpp: %.l
flex -t $< | sed '/^find_rule/d' | sed 's/void yyunput/inline void yyunput/' | sed 's/void \*yy_flex_realloc/inline void *yy_flex_realloc/' > $@
# Rule for building the bison parsers...
%.cpp %.h : %.y
bison -v -d -p $(<:%Parser.y=%) $(basename $@).y
mv -f $(basename $@).tab.c $(basename $@).cpp
mv -f $(basename $@).tab.h $(basename $@).h
# To create the directories...
%/.dir:
mkdir -p $(@D)
@date > $@
# Clean does not remove the output files... just the temporaries
clean::
rm -rf Debug Release Depend
rm -f core *.o *.d *.so *~ *.flc
# If dependancies were generated for the file that included this file,
# include the dependancies now...
#
SourceDepend = $(addsuffix .d,$(addprefix Depend/,$(basename $(Source))))
ifneq ($(SourceDepend),)
include $(SourceDepend)
endif