mirror of
https://github.com/c64scene-ar/llvm-6502.git
synced 2024-11-16 11:05:54 +00:00
fac1305da1
was centered around the premise of laying out a loop in a chain, and then rotating that chain. This is good for preserving contiguous layout, but bad for actually making sane rotations. In order to keep it safe, I had to essentially make it impossible to rotate deeply nested loops. The information needed to correctly reason about a deeply nested loop is actually available -- *before* we layout the loop. We know the inner loops are already fused into chains, etc. We lose information the moment we actually lay out the loop. The solution was the other alternative for this algorithm I discussed with Benjamin and some others: rather than rotating the loop after-the-fact, try to pick a profitable starting block for the loop's layout, and then use our existing layout logic. I was worried about the complexity of this "pick" step, but it turns out such complexity is needed to handle all the important cases I keep teasing out of benchmarks. This is, I'm afraid, a bit of a work-in-progress. It is still misbehaving on some likely important cases I'm investigating in Olden. It also isn't really tested. I'm going to try to craft some interesting nested-loop test cases, but it's likely to be extremely time consuming and I don't want to go there until I'm sure I'm testing the correct behavior. Sadly I can't come up with a way of getting simple, fine grained test cases for this logic. We need complex loop structures to even trigger much of it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145183 91177308-0d34-0410-b5e6-96231b3b80d8
931 lines
25 KiB
LLVM
931 lines
25 KiB
LLVM
; RUN: llc -mtriple=i686-linux -enable-block-placement < %s | FileCheck %s
|
|
|
|
declare void @error(i32 %i, i32 %a, i32 %b)
|
|
|
|
define i32 @test_ifchains(i32 %i, i32* %a, i32 %b) {
|
|
; Test a chain of ifs, where the block guarded by the if is error handling code
|
|
; that is not expected to run.
|
|
; CHECK: test_ifchains:
|
|
; CHECK: %entry
|
|
; CHECK: %else1
|
|
; CHECK: %else2
|
|
; CHECK: %else3
|
|
; CHECK: %else4
|
|
; CHECK: %exit
|
|
; CHECK: %then1
|
|
; CHECK: %then2
|
|
; CHECK: %then3
|
|
; CHECK: %then4
|
|
; CHECK: %then5
|
|
|
|
entry:
|
|
%gep1 = getelementptr i32* %a, i32 1
|
|
%val1 = load i32* %gep1
|
|
%cond1 = icmp ugt i32 %val1, 1
|
|
br i1 %cond1, label %then1, label %else1, !prof !0
|
|
|
|
then1:
|
|
call void @error(i32 %i, i32 1, i32 %b)
|
|
br label %else1
|
|
|
|
else1:
|
|
%gep2 = getelementptr i32* %a, i32 2
|
|
%val2 = load i32* %gep2
|
|
%cond2 = icmp ugt i32 %val2, 2
|
|
br i1 %cond2, label %then2, label %else2, !prof !0
|
|
|
|
then2:
|
|
call void @error(i32 %i, i32 1, i32 %b)
|
|
br label %else2
|
|
|
|
else2:
|
|
%gep3 = getelementptr i32* %a, i32 3
|
|
%val3 = load i32* %gep3
|
|
%cond3 = icmp ugt i32 %val3, 3
|
|
br i1 %cond3, label %then3, label %else3, !prof !0
|
|
|
|
then3:
|
|
call void @error(i32 %i, i32 1, i32 %b)
|
|
br label %else3
|
|
|
|
else3:
|
|
%gep4 = getelementptr i32* %a, i32 4
|
|
%val4 = load i32* %gep4
|
|
%cond4 = icmp ugt i32 %val4, 4
|
|
br i1 %cond4, label %then4, label %else4, !prof !0
|
|
|
|
then4:
|
|
call void @error(i32 %i, i32 1, i32 %b)
|
|
br label %else4
|
|
|
|
else4:
|
|
%gep5 = getelementptr i32* %a, i32 3
|
|
%val5 = load i32* %gep5
|
|
%cond5 = icmp ugt i32 %val5, 3
|
|
br i1 %cond5, label %then5, label %exit, !prof !0
|
|
|
|
then5:
|
|
call void @error(i32 %i, i32 1, i32 %b)
|
|
br label %exit
|
|
|
|
exit:
|
|
ret i32 %b
|
|
}
|
|
|
|
define i32 @test_loop_cold_blocks(i32 %i, i32* %a) {
|
|
; Check that we sink cold loop blocks after the hot loop body.
|
|
; CHECK: test_loop_cold_blocks:
|
|
; CHECK: %entry
|
|
; CHECK: %body1
|
|
; CHECK: %body2
|
|
; CHECK: %body3
|
|
; CHECK: %unlikely1
|
|
; CHECK: %unlikely2
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %body1
|
|
|
|
body1:
|
|
%iv = phi i32 [ 0, %entry ], [ %next, %body3 ]
|
|
%base = phi i32 [ 0, %entry ], [ %sum, %body3 ]
|
|
%unlikelycond1 = icmp slt i32 %base, 42
|
|
br i1 %unlikelycond1, label %unlikely1, label %body2, !prof !0
|
|
|
|
unlikely1:
|
|
call void @error(i32 %i, i32 1, i32 %base)
|
|
br label %body2
|
|
|
|
body2:
|
|
%unlikelycond2 = icmp sgt i32 %base, 21
|
|
br i1 %unlikelycond2, label %unlikely2, label %body3, !prof !0
|
|
|
|
unlikely2:
|
|
call void @error(i32 %i, i32 2, i32 %base)
|
|
br label %body3
|
|
|
|
body3:
|
|
%arrayidx = getelementptr inbounds i32* %a, i32 %iv
|
|
%0 = load i32* %arrayidx
|
|
%sum = add nsw i32 %0, %base
|
|
%next = add i32 %iv, 1
|
|
%exitcond = icmp eq i32 %next, %i
|
|
br i1 %exitcond, label %exit, label %body1
|
|
|
|
exit:
|
|
ret i32 %sum
|
|
}
|
|
|
|
!0 = metadata !{metadata !"branch_weights", i32 4, i32 64}
|
|
|
|
define i32 @test_loop_early_exits(i32 %i, i32* %a) {
|
|
; Check that we sink early exit blocks out of loop bodies.
|
|
; CHECK: test_loop_early_exits:
|
|
; CHECK: %entry
|
|
; CHECK: %body2
|
|
; CHECK: %body3
|
|
; CHECK: %body4
|
|
; CHECK: %body1
|
|
; CHECK: %bail1
|
|
; CHECK: %bail2
|
|
; CHECK: %bail3
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %body1
|
|
|
|
body1:
|
|
%iv = phi i32 [ 0, %entry ], [ %next, %body4 ]
|
|
%base = phi i32 [ 0, %entry ], [ %sum, %body4 ]
|
|
%bailcond1 = icmp eq i32 %base, 42
|
|
br i1 %bailcond1, label %bail1, label %body2
|
|
|
|
bail1:
|
|
ret i32 -1
|
|
|
|
body2:
|
|
%bailcond2 = icmp eq i32 %base, 43
|
|
br i1 %bailcond2, label %bail2, label %body3
|
|
|
|
bail2:
|
|
ret i32 -2
|
|
|
|
body3:
|
|
%bailcond3 = icmp eq i32 %base, 44
|
|
br i1 %bailcond3, label %bail3, label %body4
|
|
|
|
bail3:
|
|
ret i32 -3
|
|
|
|
body4:
|
|
%arrayidx = getelementptr inbounds i32* %a, i32 %iv
|
|
%0 = load i32* %arrayidx
|
|
%sum = add nsw i32 %0, %base
|
|
%next = add i32 %iv, 1
|
|
%exitcond = icmp eq i32 %next, %i
|
|
br i1 %exitcond, label %exit, label %body1
|
|
|
|
exit:
|
|
ret i32 %sum
|
|
}
|
|
|
|
define i32 @test_loop_rotate(i32 %i, i32* %a) {
|
|
; Check that we rotate conditional exits from the loop to the bottom of the
|
|
; loop, eliminating unconditional branches to the top.
|
|
; CHECK: test_loop_rotate:
|
|
; CHECK: %entry
|
|
; CHECK: %body1
|
|
; CHECK: %body0
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %body0
|
|
|
|
body0:
|
|
%iv = phi i32 [ 0, %entry ], [ %next, %body1 ]
|
|
%base = phi i32 [ 0, %entry ], [ %sum, %body1 ]
|
|
%next = add i32 %iv, 1
|
|
%exitcond = icmp eq i32 %next, %i
|
|
br i1 %exitcond, label %exit, label %body1
|
|
|
|
body1:
|
|
%arrayidx = getelementptr inbounds i32* %a, i32 %iv
|
|
%0 = load i32* %arrayidx
|
|
%sum = add nsw i32 %0, %base
|
|
%bailcond1 = icmp eq i32 %sum, 42
|
|
br label %body0
|
|
|
|
exit:
|
|
ret i32 %base
|
|
}
|
|
|
|
define void @test_loop_rotate_reversed_blocks() {
|
|
; This test case (greatly reduced from an Olden bencmark) ensures that the loop
|
|
; rotate implementation doesn't assume that loops are laid out in a particular
|
|
; order. The first loop will get split into two basic blocks, with the loop
|
|
; header coming after the loop latch.
|
|
;
|
|
; CHECK: test_loop_rotate_reversed_blocks
|
|
; CHECK: %entry
|
|
; Look for a jump into the middle of the loop, and no branches mid-way.
|
|
; CHECK: jmp
|
|
; CHECK: %loop1
|
|
; CHECK-NOT: j{{\w*}} .LBB{{.*}}
|
|
; CHECK: %loop1
|
|
; CHECK: je
|
|
|
|
entry:
|
|
%cond1 = load volatile i1* undef
|
|
br i1 %cond1, label %loop2.preheader, label %loop1
|
|
|
|
loop1:
|
|
call i32 @f()
|
|
%cond2 = load volatile i1* undef
|
|
br i1 %cond2, label %loop2.preheader, label %loop1
|
|
|
|
loop2.preheader:
|
|
call i32 @f()
|
|
%cond3 = load volatile i1* undef
|
|
br i1 %cond3, label %exit, label %loop2
|
|
|
|
loop2:
|
|
call i32 @f()
|
|
%cond4 = load volatile i1* undef
|
|
br i1 %cond4, label %exit, label %loop2
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define i32 @test_loop_align(i32 %i, i32* %a) {
|
|
; Check that we provide basic loop body alignment with the block placement
|
|
; pass.
|
|
; CHECK: test_loop_align:
|
|
; CHECK: %entry
|
|
; CHECK: .align [[ALIGN:[0-9]+]],
|
|
; CHECK-NEXT: %body
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %body
|
|
|
|
body:
|
|
%iv = phi i32 [ 0, %entry ], [ %next, %body ]
|
|
%base = phi i32 [ 0, %entry ], [ %sum, %body ]
|
|
%arrayidx = getelementptr inbounds i32* %a, i32 %iv
|
|
%0 = load i32* %arrayidx
|
|
%sum = add nsw i32 %0, %base
|
|
%next = add i32 %iv, 1
|
|
%exitcond = icmp eq i32 %next, %i
|
|
br i1 %exitcond, label %exit, label %body
|
|
|
|
exit:
|
|
ret i32 %sum
|
|
}
|
|
|
|
define i32 @test_nested_loop_align(i32 %i, i32* %a, i32* %b) {
|
|
; Check that we provide nested loop body alignment.
|
|
; CHECK: test_nested_loop_align:
|
|
; CHECK: %entry
|
|
; CHECK: .align [[ALIGN]],
|
|
; CHECK-NEXT: %loop.body.1
|
|
; CHECK: .align [[ALIGN]],
|
|
; CHECK-NEXT: %inner.loop.body
|
|
; CHECK-NOT: .align
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %loop.body.1
|
|
|
|
loop.body.1:
|
|
%iv = phi i32 [ 0, %entry ], [ %next, %loop.body.2 ]
|
|
%arrayidx = getelementptr inbounds i32* %a, i32 %iv
|
|
%bidx = load i32* %arrayidx
|
|
br label %inner.loop.body
|
|
|
|
inner.loop.body:
|
|
%inner.iv = phi i32 [ 0, %loop.body.1 ], [ %inner.next, %inner.loop.body ]
|
|
%base = phi i32 [ 0, %loop.body.1 ], [ %sum, %inner.loop.body ]
|
|
%scaled_idx = mul i32 %bidx, %iv
|
|
%inner.arrayidx = getelementptr inbounds i32* %b, i32 %scaled_idx
|
|
%0 = load i32* %inner.arrayidx
|
|
%sum = add nsw i32 %0, %base
|
|
%inner.next = add i32 %iv, 1
|
|
%inner.exitcond = icmp eq i32 %inner.next, %i
|
|
br i1 %inner.exitcond, label %loop.body.2, label %inner.loop.body
|
|
|
|
loop.body.2:
|
|
%next = add i32 %iv, 1
|
|
%exitcond = icmp eq i32 %next, %i
|
|
br i1 %exitcond, label %exit, label %loop.body.1
|
|
|
|
exit:
|
|
ret i32 %sum
|
|
}
|
|
|
|
define void @unnatural_cfg1() {
|
|
; Test that we can handle a loop with an inner unnatural loop at the end of
|
|
; a function. This is a gross CFG reduced out of the single source GCC.
|
|
; CHECK: unnatural_cfg1
|
|
; CHECK: %entry
|
|
; CHECK: %loop.body1
|
|
; CHECK: %loop.body2
|
|
; CHECK: %loop.body3
|
|
|
|
entry:
|
|
br label %loop.header
|
|
|
|
loop.header:
|
|
br label %loop.body1
|
|
|
|
loop.body1:
|
|
br i1 undef, label %loop.body3, label %loop.body2
|
|
|
|
loop.body2:
|
|
%ptr = load i32** undef, align 4
|
|
br label %loop.body3
|
|
|
|
loop.body3:
|
|
%myptr = phi i32* [ %ptr2, %loop.body5 ], [ %ptr, %loop.body2 ], [ undef, %loop.body1 ]
|
|
%bcmyptr = bitcast i32* %myptr to i32*
|
|
%val = load i32* %bcmyptr, align 4
|
|
%comp = icmp eq i32 %val, 48
|
|
br i1 %comp, label %loop.body4, label %loop.body5
|
|
|
|
loop.body4:
|
|
br i1 undef, label %loop.header, label %loop.body5
|
|
|
|
loop.body5:
|
|
%ptr2 = load i32** undef, align 4
|
|
br label %loop.body3
|
|
}
|
|
|
|
define void @unnatural_cfg2() {
|
|
; Test that we can handle a loop with a nested natural loop *and* an unnatural
|
|
; loop. This was reduced from a crash on block placement when run over
|
|
; single-source GCC.
|
|
; CHECK: unnatural_cfg2
|
|
; CHECK: %entry
|
|
; CHECK: %loop.body1
|
|
; CHECK: %loop.body2
|
|
; CHECK: %loop.header
|
|
; CHECK: %loop.body3
|
|
; CHECK: %loop.inner1.begin
|
|
; The end block is folded with %loop.body3...
|
|
; CHECK-NOT: %loop.inner1.end
|
|
; CHECK: %loop.body4
|
|
; CHECK: %loop.inner2.begin
|
|
; The loop.inner2.end block is folded
|
|
; CHECK: %bail
|
|
|
|
entry:
|
|
br label %loop.header
|
|
|
|
loop.header:
|
|
%comp0 = icmp eq i32* undef, null
|
|
br i1 %comp0, label %bail, label %loop.body1
|
|
|
|
loop.body1:
|
|
%val0 = load i32** undef, align 4
|
|
br i1 undef, label %loop.body2, label %loop.inner1.begin
|
|
|
|
loop.body2:
|
|
br i1 undef, label %loop.body4, label %loop.body3
|
|
|
|
loop.body3:
|
|
%ptr1 = getelementptr inbounds i32* %val0, i32 0
|
|
%castptr1 = bitcast i32* %ptr1 to i32**
|
|
%val1 = load i32** %castptr1, align 4
|
|
br label %loop.inner1.begin
|
|
|
|
loop.inner1.begin:
|
|
%valphi = phi i32* [ %val2, %loop.inner1.end ], [ %val1, %loop.body3 ], [ %val0, %loop.body1 ]
|
|
%castval = bitcast i32* %valphi to i32*
|
|
%comp1 = icmp eq i32 undef, 48
|
|
br i1 %comp1, label %loop.inner1.end, label %loop.body4
|
|
|
|
loop.inner1.end:
|
|
%ptr2 = getelementptr inbounds i32* %valphi, i32 0
|
|
%castptr2 = bitcast i32* %ptr2 to i32**
|
|
%val2 = load i32** %castptr2, align 4
|
|
br label %loop.inner1.begin
|
|
|
|
loop.body4.dead:
|
|
br label %loop.body4
|
|
|
|
loop.body4:
|
|
%comp2 = icmp ult i32 undef, 3
|
|
br i1 %comp2, label %loop.inner2.begin, label %loop.end
|
|
|
|
loop.inner2.begin:
|
|
br i1 false, label %loop.end, label %loop.inner2.end
|
|
|
|
loop.inner2.end:
|
|
%comp3 = icmp eq i32 undef, 1769472
|
|
br i1 %comp3, label %loop.end, label %loop.inner2.begin
|
|
|
|
loop.end:
|
|
br label %loop.header
|
|
|
|
bail:
|
|
unreachable
|
|
}
|
|
|
|
define i32 @problematic_switch() {
|
|
; This function's CFG caused overlow in the machine branch probability
|
|
; calculation, triggering asserts. Make sure we don't crash on it.
|
|
; CHECK: problematic_switch
|
|
|
|
entry:
|
|
switch i32 undef, label %exit [
|
|
i32 879, label %bogus
|
|
i32 877, label %step
|
|
i32 876, label %step
|
|
i32 875, label %step
|
|
i32 874, label %step
|
|
i32 873, label %step
|
|
i32 872, label %step
|
|
i32 868, label %step
|
|
i32 867, label %step
|
|
i32 866, label %step
|
|
i32 861, label %step
|
|
i32 860, label %step
|
|
i32 856, label %step
|
|
i32 855, label %step
|
|
i32 854, label %step
|
|
i32 831, label %step
|
|
i32 830, label %step
|
|
i32 829, label %step
|
|
i32 828, label %step
|
|
i32 815, label %step
|
|
i32 814, label %step
|
|
i32 811, label %step
|
|
i32 806, label %step
|
|
i32 805, label %step
|
|
i32 804, label %step
|
|
i32 803, label %step
|
|
i32 802, label %step
|
|
i32 801, label %step
|
|
i32 800, label %step
|
|
i32 799, label %step
|
|
i32 798, label %step
|
|
i32 797, label %step
|
|
i32 796, label %step
|
|
i32 795, label %step
|
|
]
|
|
bogus:
|
|
unreachable
|
|
step:
|
|
br label %exit
|
|
exit:
|
|
%merge = phi i32 [ 3, %step ], [ 6, %entry ]
|
|
ret i32 %merge
|
|
}
|
|
|
|
define void @fpcmp_unanalyzable_branch(i1 %cond) {
|
|
; This function's CFG contains an unanalyzable branch that is likely to be
|
|
; split due to having a different high-probability predecessor.
|
|
; CHECK: fpcmp_unanalyzable_branch
|
|
; CHECK: %entry
|
|
; CHECK: %exit
|
|
; CHECK-NOT: %if.then
|
|
; CHECK-NOT: %if.end
|
|
; CHECK-NOT: jne
|
|
; CHECK-NOT: jnp
|
|
; CHECK: jne
|
|
; CHECK-NEXT: jnp
|
|
; CHECK-NEXT: %if.then
|
|
|
|
entry:
|
|
; Note that this branch must be strongly biased toward
|
|
; 'entry.if.then_crit_edge' to ensure that we would try to form a chain for
|
|
; 'entry' -> 'entry.if.then_crit_edge' -> 'if.then'. It is the last edge in that
|
|
; chain which would violate the unanalyzable branch in 'exit', but we won't even
|
|
; try this trick unless 'if.then' is believed to almost always be reached from
|
|
; 'entry.if.then_crit_edge'.
|
|
br i1 %cond, label %entry.if.then_crit_edge, label %lor.lhs.false, !prof !1
|
|
|
|
entry.if.then_crit_edge:
|
|
%.pre14 = load i8* undef, align 1, !tbaa !0
|
|
br label %if.then
|
|
|
|
lor.lhs.false:
|
|
br i1 undef, label %if.end, label %exit
|
|
|
|
exit:
|
|
%cmp.i = fcmp une double 0.000000e+00, undef
|
|
br i1 %cmp.i, label %if.then, label %if.end
|
|
|
|
if.then:
|
|
%0 = phi i8 [ %.pre14, %entry.if.then_crit_edge ], [ undef, %exit ]
|
|
%1 = and i8 %0, 1
|
|
store i8 %1, i8* undef, align 4, !tbaa !0
|
|
br label %if.end
|
|
|
|
if.end:
|
|
ret void
|
|
}
|
|
|
|
!1 = metadata !{metadata !"branch_weights", i32 1000, i32 1}
|
|
|
|
declare i32 @f()
|
|
declare i32 @g()
|
|
declare i32 @h(i32 %x)
|
|
|
|
define i32 @test_global_cfg_break_profitability() {
|
|
; Check that our metrics for the profitability of a CFG break are global rather
|
|
; than local. A successor may be very hot, but if the current block isn't, it
|
|
; doesn't matter. Within this test the 'then' block is slightly warmer than the
|
|
; 'else' block, but not nearly enough to merit merging it with the exit block
|
|
; even though the probability of 'then' branching to the 'exit' block is very
|
|
; high.
|
|
; CHECK: test_global_cfg_break_profitability
|
|
; CHECK: calll {{_?}}f
|
|
; CHECK: calll {{_?}}g
|
|
; CHECK: calll {{_?}}h
|
|
; CHECK: ret
|
|
|
|
entry:
|
|
br i1 undef, label %then, label %else, !prof !2
|
|
|
|
then:
|
|
%then.result = call i32 @f()
|
|
br label %exit
|
|
|
|
else:
|
|
%else.result = call i32 @g()
|
|
br label %exit
|
|
|
|
exit:
|
|
%result = phi i32 [ %then.result, %then ], [ %else.result, %else ]
|
|
%result2 = call i32 @h(i32 %result)
|
|
ret i32 %result
|
|
}
|
|
|
|
!2 = metadata !{metadata !"branch_weights", i32 3, i32 1}
|
|
|
|
declare i32 @__gxx_personality_v0(...)
|
|
|
|
define void @test_eh_lpad_successor() {
|
|
; Some times the landing pad ends up as the first successor of an invoke block.
|
|
; When this happens, a strange result used to fall out of updateTerminators: we
|
|
; didn't correctly locate the fallthrough successor, assuming blindly that the
|
|
; first one was the fallthrough successor. As a result, we would add an
|
|
; erroneous jump to the landing pad thinking *that* was the default successor.
|
|
; CHECK: test_eh_lpad_successor
|
|
; CHECK: %entry
|
|
; CHECK-NOT: jmp
|
|
; CHECK: %loop
|
|
|
|
entry:
|
|
invoke i32 @f() to label %preheader unwind label %lpad
|
|
|
|
preheader:
|
|
br label %loop
|
|
|
|
lpad:
|
|
%lpad.val = landingpad { i8*, i32 } personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*)
|
|
cleanup
|
|
resume { i8*, i32 } %lpad.val
|
|
|
|
loop:
|
|
br label %loop
|
|
}
|
|
|
|
declare void @fake_throw() noreturn
|
|
|
|
define void @test_eh_throw() {
|
|
; For blocks containing a 'throw' (or similar functionality), we have
|
|
; a no-return invoke. In this case, only EH successors will exist, and
|
|
; fallthrough simply won't occur. Make sure we don't crash trying to update
|
|
; terminators for such constructs.
|
|
;
|
|
; CHECK: test_eh_throw
|
|
; CHECK: %entry
|
|
; CHECK: %cleanup
|
|
|
|
entry:
|
|
invoke void @fake_throw() to label %continue unwind label %cleanup
|
|
|
|
continue:
|
|
unreachable
|
|
|
|
cleanup:
|
|
%0 = landingpad { i8*, i32 } personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*)
|
|
cleanup
|
|
unreachable
|
|
}
|
|
|
|
define void @test_unnatural_cfg_backwards_inner_loop() {
|
|
; Test that when we encounter an unnatural CFG structure after having formed
|
|
; a chain for an inner loop which happened to be laid out backwards we don't
|
|
; attempt to merge onto the wrong end of the inner loop just because we find it
|
|
; first. This was reduced from a crasher in GCC's single source.
|
|
;
|
|
; CHECK: test_unnatural_cfg_backwards_inner_loop
|
|
; CHECK: %entry
|
|
; CHECK: %body
|
|
; CHECK: %loop2b
|
|
; CHECK: %loop1
|
|
; CHECK: %loop2a
|
|
|
|
entry:
|
|
br i1 undef, label %loop2a, label %body
|
|
|
|
body:
|
|
br label %loop2a
|
|
|
|
loop1:
|
|
%next.load = load i32** undef
|
|
br i1 %comp.a, label %loop2a, label %loop2b
|
|
|
|
loop2a:
|
|
%var = phi i32* [ null, %entry ], [ null, %body ], [ %next.phi, %loop1 ]
|
|
%next.var = phi i32* [ null, %entry ], [ undef, %body ], [ %next.load, %loop1 ]
|
|
%comp.a = icmp eq i32* %var, null
|
|
br label %loop3
|
|
|
|
loop2b:
|
|
%gep = getelementptr inbounds i32* %var.phi, i32 0
|
|
%next.ptr = bitcast i32* %gep to i32**
|
|
store i32* %next.phi, i32** %next.ptr
|
|
br label %loop3
|
|
|
|
loop3:
|
|
%var.phi = phi i32* [ %next.phi, %loop2b ], [ %var, %loop2a ]
|
|
%next.phi = phi i32* [ %next.load, %loop2b ], [ %next.var, %loop2a ]
|
|
br label %loop1
|
|
}
|
|
|
|
define void @unanalyzable_branch_to_loop_header() {
|
|
; Ensure that we can handle unanalyzable branches into loop headers. We
|
|
; pre-form chains for unanalyzable branches, and will find the tail end of that
|
|
; at the start of the loop. This function uses floating point comparison
|
|
; fallthrough because that happens to always produce unanalyzable branches on
|
|
; x86.
|
|
;
|
|
; CHECK: unanalyzable_branch_to_loop_header
|
|
; CHECK: %entry
|
|
; CHECK: %loop
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
%cmp = fcmp une double 0.000000e+00, undef
|
|
br i1 %cmp, label %loop, label %exit
|
|
|
|
loop:
|
|
%cond = icmp eq i8 undef, 42
|
|
br i1 %cond, label %exit, label %loop
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define void @unanalyzable_branch_to_best_succ(i1 %cond) {
|
|
; Ensure that we can handle unanalyzable branches where the destination block
|
|
; gets selected as the optimal sucessor to merge.
|
|
;
|
|
; CHECK: unanalyzable_branch_to_best_succ
|
|
; CHECK: %entry
|
|
; CHECK: %foo
|
|
; CHECK: %bar
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
; Bias this branch toward bar to ensure we form that chain.
|
|
br i1 %cond, label %bar, label %foo, !prof !1
|
|
|
|
foo:
|
|
%cmp = fcmp une double 0.000000e+00, undef
|
|
br i1 %cmp, label %bar, label %exit
|
|
|
|
bar:
|
|
call i32 @f()
|
|
br label %exit
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define void @unanalyzable_branch_to_free_block(float %x) {
|
|
; Ensure that we can handle unanalyzable branches where the destination block
|
|
; gets selected as the best free block in the CFG.
|
|
;
|
|
; CHECK: unanalyzable_branch_to_free_block
|
|
; CHECK: %entry
|
|
; CHECK: %a
|
|
; CHECK: %b
|
|
; CHECK: %c
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br i1 undef, label %a, label %b
|
|
|
|
a:
|
|
call i32 @f()
|
|
br label %c
|
|
|
|
b:
|
|
%cmp = fcmp une float %x, undef
|
|
br i1 %cmp, label %c, label %exit
|
|
|
|
c:
|
|
call i32 @g()
|
|
br label %exit
|
|
|
|
exit:
|
|
ret void
|
|
}
|
|
|
|
define void @many_unanalyzable_branches() {
|
|
; Ensure that we don't crash as we're building up many unanalyzable branches,
|
|
; blocks, and loops.
|
|
;
|
|
; CHECK: many_unanalyzable_branches
|
|
; CHECK: %entry
|
|
; CHECK: %exit
|
|
|
|
entry:
|
|
br label %0
|
|
|
|
%val0 = load volatile float* undef
|
|
%cmp0 = fcmp une float %val0, undef
|
|
br i1 %cmp0, label %1, label %0
|
|
%val1 = load volatile float* undef
|
|
%cmp1 = fcmp une float %val1, undef
|
|
br i1 %cmp1, label %2, label %1
|
|
%val2 = load volatile float* undef
|
|
%cmp2 = fcmp une float %val2, undef
|
|
br i1 %cmp2, label %3, label %2
|
|
%val3 = load volatile float* undef
|
|
%cmp3 = fcmp une float %val3, undef
|
|
br i1 %cmp3, label %4, label %3
|
|
%val4 = load volatile float* undef
|
|
%cmp4 = fcmp une float %val4, undef
|
|
br i1 %cmp4, label %5, label %4
|
|
%val5 = load volatile float* undef
|
|
%cmp5 = fcmp une float %val5, undef
|
|
br i1 %cmp5, label %6, label %5
|
|
%val6 = load volatile float* undef
|
|
%cmp6 = fcmp une float %val6, undef
|
|
br i1 %cmp6, label %7, label %6
|
|
%val7 = load volatile float* undef
|
|
%cmp7 = fcmp une float %val7, undef
|
|
br i1 %cmp7, label %8, label %7
|
|
%val8 = load volatile float* undef
|
|
%cmp8 = fcmp une float %val8, undef
|
|
br i1 %cmp8, label %9, label %8
|
|
%val9 = load volatile float* undef
|
|
%cmp9 = fcmp une float %val9, undef
|
|
br i1 %cmp9, label %10, label %9
|
|
%val10 = load volatile float* undef
|
|
%cmp10 = fcmp une float %val10, undef
|
|
br i1 %cmp10, label %11, label %10
|
|
%val11 = load volatile float* undef
|
|
%cmp11 = fcmp une float %val11, undef
|
|
br i1 %cmp11, label %12, label %11
|
|
%val12 = load volatile float* undef
|
|
%cmp12 = fcmp une float %val12, undef
|
|
br i1 %cmp12, label %13, label %12
|
|
%val13 = load volatile float* undef
|
|
%cmp13 = fcmp une float %val13, undef
|
|
br i1 %cmp13, label %14, label %13
|
|
%val14 = load volatile float* undef
|
|
%cmp14 = fcmp une float %val14, undef
|
|
br i1 %cmp14, label %15, label %14
|
|
%val15 = load volatile float* undef
|
|
%cmp15 = fcmp une float %val15, undef
|
|
br i1 %cmp15, label %16, label %15
|
|
%val16 = load volatile float* undef
|
|
%cmp16 = fcmp une float %val16, undef
|
|
br i1 %cmp16, label %17, label %16
|
|
%val17 = load volatile float* undef
|
|
%cmp17 = fcmp une float %val17, undef
|
|
br i1 %cmp17, label %18, label %17
|
|
%val18 = load volatile float* undef
|
|
%cmp18 = fcmp une float %val18, undef
|
|
br i1 %cmp18, label %19, label %18
|
|
%val19 = load volatile float* undef
|
|
%cmp19 = fcmp une float %val19, undef
|
|
br i1 %cmp19, label %20, label %19
|
|
%val20 = load volatile float* undef
|
|
%cmp20 = fcmp une float %val20, undef
|
|
br i1 %cmp20, label %21, label %20
|
|
%val21 = load volatile float* undef
|
|
%cmp21 = fcmp une float %val21, undef
|
|
br i1 %cmp21, label %22, label %21
|
|
%val22 = load volatile float* undef
|
|
%cmp22 = fcmp une float %val22, undef
|
|
br i1 %cmp22, label %23, label %22
|
|
%val23 = load volatile float* undef
|
|
%cmp23 = fcmp une float %val23, undef
|
|
br i1 %cmp23, label %24, label %23
|
|
%val24 = load volatile float* undef
|
|
%cmp24 = fcmp une float %val24, undef
|
|
br i1 %cmp24, label %25, label %24
|
|
%val25 = load volatile float* undef
|
|
%cmp25 = fcmp une float %val25, undef
|
|
br i1 %cmp25, label %26, label %25
|
|
%val26 = load volatile float* undef
|
|
%cmp26 = fcmp une float %val26, undef
|
|
br i1 %cmp26, label %27, label %26
|
|
%val27 = load volatile float* undef
|
|
%cmp27 = fcmp une float %val27, undef
|
|
br i1 %cmp27, label %28, label %27
|
|
%val28 = load volatile float* undef
|
|
%cmp28 = fcmp une float %val28, undef
|
|
br i1 %cmp28, label %29, label %28
|
|
%val29 = load volatile float* undef
|
|
%cmp29 = fcmp une float %val29, undef
|
|
br i1 %cmp29, label %30, label %29
|
|
%val30 = load volatile float* undef
|
|
%cmp30 = fcmp une float %val30, undef
|
|
br i1 %cmp30, label %31, label %30
|
|
%val31 = load volatile float* undef
|
|
%cmp31 = fcmp une float %val31, undef
|
|
br i1 %cmp31, label %32, label %31
|
|
%val32 = load volatile float* undef
|
|
%cmp32 = fcmp une float %val32, undef
|
|
br i1 %cmp32, label %33, label %32
|
|
%val33 = load volatile float* undef
|
|
%cmp33 = fcmp une float %val33, undef
|
|
br i1 %cmp33, label %34, label %33
|
|
%val34 = load volatile float* undef
|
|
%cmp34 = fcmp une float %val34, undef
|
|
br i1 %cmp34, label %35, label %34
|
|
%val35 = load volatile float* undef
|
|
%cmp35 = fcmp une float %val35, undef
|
|
br i1 %cmp35, label %36, label %35
|
|
%val36 = load volatile float* undef
|
|
%cmp36 = fcmp une float %val36, undef
|
|
br i1 %cmp36, label %37, label %36
|
|
%val37 = load volatile float* undef
|
|
%cmp37 = fcmp une float %val37, undef
|
|
br i1 %cmp37, label %38, label %37
|
|
%val38 = load volatile float* undef
|
|
%cmp38 = fcmp une float %val38, undef
|
|
br i1 %cmp38, label %39, label %38
|
|
%val39 = load volatile float* undef
|
|
%cmp39 = fcmp une float %val39, undef
|
|
br i1 %cmp39, label %40, label %39
|
|
%val40 = load volatile float* undef
|
|
%cmp40 = fcmp une float %val40, undef
|
|
br i1 %cmp40, label %41, label %40
|
|
%val41 = load volatile float* undef
|
|
%cmp41 = fcmp une float %val41, undef
|
|
br i1 %cmp41, label %42, label %41
|
|
%val42 = load volatile float* undef
|
|
%cmp42 = fcmp une float %val42, undef
|
|
br i1 %cmp42, label %43, label %42
|
|
%val43 = load volatile float* undef
|
|
%cmp43 = fcmp une float %val43, undef
|
|
br i1 %cmp43, label %44, label %43
|
|
%val44 = load volatile float* undef
|
|
%cmp44 = fcmp une float %val44, undef
|
|
br i1 %cmp44, label %45, label %44
|
|
%val45 = load volatile float* undef
|
|
%cmp45 = fcmp une float %val45, undef
|
|
br i1 %cmp45, label %46, label %45
|
|
%val46 = load volatile float* undef
|
|
%cmp46 = fcmp une float %val46, undef
|
|
br i1 %cmp46, label %47, label %46
|
|
%val47 = load volatile float* undef
|
|
%cmp47 = fcmp une float %val47, undef
|
|
br i1 %cmp47, label %48, label %47
|
|
%val48 = load volatile float* undef
|
|
%cmp48 = fcmp une float %val48, undef
|
|
br i1 %cmp48, label %49, label %48
|
|
%val49 = load volatile float* undef
|
|
%cmp49 = fcmp une float %val49, undef
|
|
br i1 %cmp49, label %50, label %49
|
|
%val50 = load volatile float* undef
|
|
%cmp50 = fcmp une float %val50, undef
|
|
br i1 %cmp50, label %51, label %50
|
|
%val51 = load volatile float* undef
|
|
%cmp51 = fcmp une float %val51, undef
|
|
br i1 %cmp51, label %52, label %51
|
|
%val52 = load volatile float* undef
|
|
%cmp52 = fcmp une float %val52, undef
|
|
br i1 %cmp52, label %53, label %52
|
|
%val53 = load volatile float* undef
|
|
%cmp53 = fcmp une float %val53, undef
|
|
br i1 %cmp53, label %54, label %53
|
|
%val54 = load volatile float* undef
|
|
%cmp54 = fcmp une float %val54, undef
|
|
br i1 %cmp54, label %55, label %54
|
|
%val55 = load volatile float* undef
|
|
%cmp55 = fcmp une float %val55, undef
|
|
br i1 %cmp55, label %56, label %55
|
|
%val56 = load volatile float* undef
|
|
%cmp56 = fcmp une float %val56, undef
|
|
br i1 %cmp56, label %57, label %56
|
|
%val57 = load volatile float* undef
|
|
%cmp57 = fcmp une float %val57, undef
|
|
br i1 %cmp57, label %58, label %57
|
|
%val58 = load volatile float* undef
|
|
%cmp58 = fcmp une float %val58, undef
|
|
br i1 %cmp58, label %59, label %58
|
|
%val59 = load volatile float* undef
|
|
%cmp59 = fcmp une float %val59, undef
|
|
br i1 %cmp59, label %60, label %59
|
|
%val60 = load volatile float* undef
|
|
%cmp60 = fcmp une float %val60, undef
|
|
br i1 %cmp60, label %61, label %60
|
|
%val61 = load volatile float* undef
|
|
%cmp61 = fcmp une float %val61, undef
|
|
br i1 %cmp61, label %62, label %61
|
|
%val62 = load volatile float* undef
|
|
%cmp62 = fcmp une float %val62, undef
|
|
br i1 %cmp62, label %63, label %62
|
|
%val63 = load volatile float* undef
|
|
%cmp63 = fcmp une float %val63, undef
|
|
br i1 %cmp63, label %64, label %63
|
|
%val64 = load volatile float* undef
|
|
%cmp64 = fcmp une float %val64, undef
|
|
br i1 %cmp64, label %65, label %64
|
|
|
|
br label %exit
|
|
exit:
|
|
ret void
|
|
}
|