llvm-6502/test/CodeGen/SystemZ/vec-abs-02.ll
Ulrich Weigand aa5c996eda [SystemZ] Add CodeGen support for integer vector types
This the first of a series of patches to add CodeGen support exploiting
the instructions of the z13 vector facility.  This patch adds support
for the native integer vector types (v16i8, v8i16, v4i32, v2i64).

When the vector facility is present, we default to the new vector ABI.
This is characterized by two major differences:
- Vector types are passed/returned in vector registers
  (except for unnamed arguments of a variable-argument list function).
- Vector types are at most 8-byte aligned.

The reason for the choice of 8-byte vector alignment is that the hardware
is able to efficiently load vectors at 8-byte alignment, and the ABI only
guarantees 8-byte alignment of the stack pointer, so requiring any higher
alignment for vectors would require dynamic stack re-alignment code.

However, for compatibility with old code that may use vector types, when
*not* using the vector facility, the old alignment rules (vector types
are naturally aligned) remain in use.

These alignment rules are not only implemented at the C language level
(implemented in clang), but also at the LLVM IR level.  This is done
by selecting a different DataLayout string depending on whether the
vector ABI is in effect or not.

Based on a patch by Richard Sandiford.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236521 91177308-0d34-0410-b5e6-96231b3b80d8
2015-05-05 19:25:42 +00:00

143 lines
4.1 KiB
LLVM

; Test v8i16 absolute.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z13 | FileCheck %s
; Test with slt.
define <8 x i16> @f1(<8 x i16> %val) {
; CHECK-LABEL: f1:
; CHECK: vlph %v24, %v24
; CHECK: br %r14
%cmp = icmp slt <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %neg, <8 x i16> %val
ret <8 x i16> %ret
}
; Test with sle.
define <8 x i16> @f2(<8 x i16> %val) {
; CHECK-LABEL: f2:
; CHECK: vlph %v24, %v24
; CHECK: br %r14
%cmp = icmp sle <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %neg, <8 x i16> %val
ret <8 x i16> %ret
}
; Test with sgt.
define <8 x i16> @f3(<8 x i16> %val) {
; CHECK-LABEL: f3:
; CHECK: vlph %v24, %v24
; CHECK: br %r14
%cmp = icmp sgt <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %val, <8 x i16> %neg
ret <8 x i16> %ret
}
; Test with sge.
define <8 x i16> @f4(<8 x i16> %val) {
; CHECK-LABEL: f4:
; CHECK: vlph %v24, %v24
; CHECK: br %r14
%cmp = icmp sge <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %val, <8 x i16> %neg
ret <8 x i16> %ret
}
; Test that negative absolute uses VLPH too. There is no vector equivalent
; of LOAD NEGATIVE.
define <8 x i16> @f5(<8 x i16> %val) {
; CHECK-LABEL: f5:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%cmp = icmp slt <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%abs = select <8 x i1> %cmp, <8 x i16> %neg, <8 x i16> %val
%ret = sub <8 x i16> zeroinitializer, %abs
ret <8 x i16> %ret
}
; Try another form of negative absolute (slt version).
define <8 x i16> @f6(<8 x i16> %val) {
; CHECK-LABEL: f6:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%cmp = icmp slt <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %val, <8 x i16> %neg
ret <8 x i16> %ret
}
; Test with sle.
define <8 x i16> @f7(<8 x i16> %val) {
; CHECK-LABEL: f7:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%cmp = icmp sle <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %val, <8 x i16> %neg
ret <8 x i16> %ret
}
; Test with sgt.
define <8 x i16> @f8(<8 x i16> %val) {
; CHECK-LABEL: f8:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%cmp = icmp sgt <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %neg, <8 x i16> %val
ret <8 x i16> %ret
}
; Test with sge.
define <8 x i16> @f9(<8 x i16> %val) {
; CHECK-LABEL: f9:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%cmp = icmp sge <8 x i16> %val, zeroinitializer
%neg = sub <8 x i16> zeroinitializer, %val
%ret = select <8 x i1> %cmp, <8 x i16> %neg, <8 x i16> %val
ret <8 x i16> %ret
}
; Test with an SRA-based boolean vector.
define <8 x i16> @f10(<8 x i16> %val) {
; CHECK-LABEL: f10:
; CHECK: vlph %v24, %v24
; CHECK: br %r14
%shr = ashr <8 x i16> %val,
<i16 15, i16 15, i16 15, i16 15, i16 15, i16 15, i16 15, i16 15>
%neg = sub <8 x i16> zeroinitializer, %val
%and1 = and <8 x i16> %shr, %neg
%not = xor <8 x i16> %shr,
<i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1>
%and2 = and <8 x i16> %not, %val
%ret = or <8 x i16> %and1, %and2
ret <8 x i16> %ret
}
; ...and again in reverse
define <8 x i16> @f11(<8 x i16> %val) {
; CHECK-LABEL: f11:
; CHECK: vlph [[REG:%v[0-9]+]], %v24
; CHECK: vlch %v24, [[REG]]
; CHECK: br %r14
%shr = ashr <8 x i16> %val,
<i16 15, i16 15, i16 15, i16 15, i16 15, i16 15, i16 15, i16 15>
%and1 = and <8 x i16> %shr, %val
%not = xor <8 x i16> %shr,
<i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1, i16 -1>
%neg = sub <8 x i16> zeroinitializer, %val
%and2 = and <8 x i16> %not, %neg
%ret = or <8 x i16> %and1, %and2
ret <8 x i16> %ret
}