llvm-6502/test/CodeGen/SystemZ/int-add-02.ll
David Blaikie 7c9c6ed761 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00

176 lines
4.5 KiB
LLVM

; Test 32-bit addition in which the second operand is variable.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z196 | FileCheck %s
declare i32 @foo()
; Check AR.
define i32 @f1(i32 %a, i32 %b) {
; CHECK-LABEL: f1:
; CHECK: ar %r2, %r3
; CHECK: br %r14
%add = add i32 %a, %b
ret i32 %add
}
; Check the low end of the A range.
define i32 @f2(i32 %a, i32 *%src) {
; CHECK-LABEL: f2:
; CHECK: a %r2, 0(%r3)
; CHECK: br %r14
%b = load i32 , i32 *%src
%add = add i32 %a, %b
ret i32 %add
}
; Check the high end of the aligned A range.
define i32 @f3(i32 %a, i32 *%src) {
; CHECK-LABEL: f3:
; CHECK: a %r2, 4092(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 1023
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the next word up, which should use AY instead of A.
define i32 @f4(i32 %a, i32 *%src) {
; CHECK-LABEL: f4:
; CHECK: ay %r2, 4096(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 1024
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the high end of the aligned AY range.
define i32 @f5(i32 %a, i32 *%src) {
; CHECK-LABEL: f5:
; CHECK: ay %r2, 524284(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 131071
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the next word up, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f6(i32 %a, i32 *%src) {
; CHECK-LABEL: f6:
; CHECK: agfi %r3, 524288
; CHECK: a %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 131072
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the high end of the negative aligned AY range.
define i32 @f7(i32 %a, i32 *%src) {
; CHECK-LABEL: f7:
; CHECK: ay %r2, -4(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -1
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the low end of the AY range.
define i32 @f8(i32 %a, i32 *%src) {
; CHECK-LABEL: f8:
; CHECK: ay %r2, -524288(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -131072
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check the next word down, which needs separate address logic.
; Other sequences besides this one would be OK.
define i32 @f9(i32 %a, i32 *%src) {
; CHECK-LABEL: f9:
; CHECK: agfi %r3, -524292
; CHECK: a %r2, 0(%r3)
; CHECK: br %r14
%ptr = getelementptr i32, i32 *%src, i64 -131073
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check that A allows an index.
define i32 @f10(i32 %a, i64 %src, i64 %index) {
; CHECK-LABEL: f10:
; CHECK: a %r2, 4092({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%add1 = add i64 %src, %index
%add2 = add i64 %add1, 4092
%ptr = inttoptr i64 %add2 to i32 *
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check that AY allows an index.
define i32 @f11(i32 %a, i64 %src, i64 %index) {
; CHECK-LABEL: f11:
; CHECK: ay %r2, 4096({{%r4,%r3|%r3,%r4}})
; CHECK: br %r14
%add1 = add i64 %src, %index
%add2 = add i64 %add1, 4096
%ptr = inttoptr i64 %add2 to i32 *
%b = load i32 , i32 *%ptr
%add = add i32 %a, %b
ret i32 %add
}
; Check that additions of spilled values can use A rather than AR.
define i32 @f12(i32 *%ptr0) {
; CHECK-LABEL: f12:
; CHECK: brasl %r14, foo@PLT
; CHECK: a %r2, 16{{[04]}}(%r15)
; CHECK: br %r14
%ptr1 = getelementptr i32, i32 *%ptr0, i64 2
%ptr2 = getelementptr i32, i32 *%ptr0, i64 4
%ptr3 = getelementptr i32, i32 *%ptr0, i64 6
%ptr4 = getelementptr i32, i32 *%ptr0, i64 8
%ptr5 = getelementptr i32, i32 *%ptr0, i64 10
%ptr6 = getelementptr i32, i32 *%ptr0, i64 12
%ptr7 = getelementptr i32, i32 *%ptr0, i64 14
%ptr8 = getelementptr i32, i32 *%ptr0, i64 16
%ptr9 = getelementptr i32, i32 *%ptr0, i64 18
%val0 = load i32 , i32 *%ptr0
%val1 = load i32 , i32 *%ptr1
%val2 = load i32 , i32 *%ptr2
%val3 = load i32 , i32 *%ptr3
%val4 = load i32 , i32 *%ptr4
%val5 = load i32 , i32 *%ptr5
%val6 = load i32 , i32 *%ptr6
%val7 = load i32 , i32 *%ptr7
%val8 = load i32 , i32 *%ptr8
%val9 = load i32 , i32 *%ptr9
%ret = call i32 @foo()
%add0 = add i32 %ret, %val0
%add1 = add i32 %add0, %val1
%add2 = add i32 %add1, %val2
%add3 = add i32 %add2, %val3
%add4 = add i32 %add3, %val4
%add5 = add i32 %add4, %val5
%add6 = add i32 %add5, %val6
%add7 = add i32 %add6, %val7
%add8 = add i32 %add7, %val8
%add9 = add i32 %add8, %val9
ret i32 %add9
}