.. |
msa
|
[mips][msa] MSA loads and stores have a 10-bit offset. Account for this when lowering FrameIndex.
|
2013-11-30 13:47:57 +00:00 |
2008-06-05-Carry.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-07-03-SRet.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-07-06-fadd64.ll
|
Re-enable some of the disabled tests. Use FileCheck instead of grep to check
|
2011-09-21 17:36:30 +00:00 |
2008-07-07-Float2Int.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-07-07-FPExtend.ll
|
Re-enable some of the disabled tests. Use FileCheck instead of grep to check
|
2011-09-21 17:36:30 +00:00 |
2008-07-07-IntDoubleConvertions.ll
|
Re-enable some of the disabled tests. Use FileCheck instead of grep to check
|
2011-09-21 17:36:30 +00:00 |
2008-07-15-InternalConstant.ll
|
Re-enable some of the disabled tests. Use FileCheck instead of grep to check
|
2011-09-21 17:36:30 +00:00 |
2008-07-15-SmallSection.ll
|
Remove +.
|
2011-09-21 17:43:48 +00:00 |
2008-07-16-SignExtInReg.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
2008-07-22-Cstpool.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-07-23-fpcmp.ll
|
Fix the remaining TCL-style quotes found in the testsuite. This is
|
2012-07-02 19:09:46 +00:00 |
2008-07-29-icmp.ll
|
Fix the remaining TCL-style quotes found in the testsuite. This is
|
2012-07-02 19:09:46 +00:00 |
2008-07-31-fcopysign.ll
|
|
|
2008-08-01-AsmInline.ll
|
[mips] Properly parse registers that appear in inline-asm constraints.
|
2013-08-14 00:21:25 +00:00 |
2008-08-03-fabs64.ll
|
Drop support for Allegrex. Allegrex implements a variant of Mips2.
|
2011-09-09 19:00:51 +00:00 |
2008-08-03-ReturnDouble.ll
|
|
|
2008-08-04-Bitconvert.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-08-06-Alloca.ll
|
Fix test cases to use FileCheck.
|
2011-12-02 22:28:09 +00:00 |
2008-08-07-CC.ll
|
|
|
2008-08-07-FPRound.ll
|
Re-enable some of the disabled tests. Use FileCheck instead of grep to check
|
2011-09-21 17:36:30 +00:00 |
2008-08-08-bswap.ll
|
Drop support for Allegrex. Allegrex implements a variant of Mips2.
|
2011-09-09 19:00:51 +00:00 |
2008-08-08-ctlz.ll
|
Manually upgrade the test suite to specify the flag to cttz and ctlz.
|
2011-12-12 11:59:10 +00:00 |
2008-10-13-LegalizerBug.ll
|
|
|
2008-11-10-xint_to_fp.ll
|
Remove the no longer existent psp triple from a test.
|
2012-03-08 21:22:27 +00:00 |
2009-11-16-CstPoolLoad.ll
|
Fix LowerConstantPool to produce instructions with the correct relocation
|
2012-04-04 18:26:12 +00:00 |
2010-07-20-Switch.ll
|
[mips] Custom-legalize BR_JT.
|
2013-03-06 21:32:03 +00:00 |
2010-11-09-CountLeading.ll
|
Manually upgrade the test suite to specify the flag to cttz and ctlz.
|
2011-12-12 11:59:10 +00:00 |
2010-11-09-Mul.ll
|
Fix test cases.
|
2011-09-09 23:14:58 +00:00 |
2011-05-26-BranchKillsVreg.ll
|
Fix PR10046 by updating LiveVariables kill info when splitting live ranges.
|
2011-05-29 20:10:28 +00:00 |
2012-12-12-ExpandMemcpy.ll
|
Fix a logic bug in inline expansion of memcpy / memset with an overlapping
|
2012-12-12 20:43:23 +00:00 |
2013-11-18-fp64-const0.ll
|
[mips] Fix 'ran out of registers' in MIPS32 with FP64 when generating code for (ConstantFP 0.0)
|
2013-11-18 13:12:43 +00:00 |
addc.ll
|
|
|
addi.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
addressing-mode.ll
|
Initial implementation of MipsTargetLowering::isLegalAddressingMode.
|
2012-11-17 00:25:41 +00:00 |
align16.ll
|
Cleaning up of prologue/epilogue code for Mips16. First step
|
2013-12-08 16:51:52 +00:00 |
alloca16.ll
|
Cleaning up of prologue/epilogue code for Mips16. First step
|
2013-12-08 16:51:52 +00:00 |
alloca.ll
|
TBAA: remove !tbaa from testing cases if not used.
|
2013-04-30 17:52:57 +00:00 |
analyzebranch.ll
|
Fix test cases.
|
2012-05-12 03:25:16 +00:00 |
and1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
asm-large-immediate.ll
|
The inline asm operand modifier 'n' is suppose
|
2012-06-21 21:37:54 +00:00 |
atomic.ll
|
[mips] Print instructions "beq", "bne" and "or" using assembler pseudo
|
2013-07-26 18:34:25 +00:00 |
atomicops.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
beqzc1.ll
|
Make all the conditional Mips 16 branches get initially set for the
|
2013-11-15 02:21:52 +00:00 |
beqzc.ll
|
Make all the conditional Mips 16 branches get initially set for the
|
2013-11-15 02:21:52 +00:00 |
biggot.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
blez_bgez.ll
|
Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.
|
2013-07-13 20:38:47 +00:00 |
blockaddr.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
br-jmp.ll
|
Expand pseudos/macros for Selt. This is the last of the complex
|
2013-02-23 03:09:56 +00:00 |
brconeq.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconeqk.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconeqz.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconge.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brcongt.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconle.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconlt.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconne.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconnek.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brconnez.ll
|
Add conditional branch instructions and their patterns.
|
2012-10-17 22:29:54 +00:00 |
brdelayslot.ll
|
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
|
2013-09-28 00:12:32 +00:00 |
brind.ll
|
Implement brind operator for mips16.
|
2012-10-28 23:08:07 +00:00 |
brsize3.ll
|
Take care of long short branch immediate instructions for mips16 in
|
2013-11-13 23:52:18 +00:00 |
brsize3a.ll
|
Take care of long short branch immediate instructions for mips16 in
|
2013-11-13 23:52:18 +00:00 |
bswap.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
buildpairextractelementf64.ll
|
[mips] Add support for mfhc1 and mthc1.
|
2013-08-20 23:47:25 +00:00 |
call-optimization.ll
|
[mips] Fix test case.
|
2013-12-07 02:48:29 +00:00 |
check-noat.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
ci2.ll
|
Fix a funny bug I introduced during conversion of ARM constant islands to Mips.
|
2013-11-24 02:53:09 +00:00 |
cmov.ll
|
[mips] Small code generation improvement for conditional operator (select)
|
2013-12-05 12:07:05 +00:00 |
cmplarge.ll
|
TBAA: remove !tbaa from testing cases when they are not needed.
|
2013-09-30 18:17:35 +00:00 |
const1.ll
|
Make first substantial checkin of my port of ARM constant islands code to Mips.
|
2013-10-27 21:57:36 +00:00 |
const4a.ll
|
Update older test cases for latest patch.
|
2013-11-24 03:37:56 +00:00 |
const6.ll
|
Update older test cases for latest patch.
|
2013-11-24 03:37:56 +00:00 |
const6a.ll
|
Allow the code which returns the length for inline assembler to know
|
2013-11-13 04:37:52 +00:00 |
const-mult.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
constantfp0.ll
|
Test case for 137484
|
2011-08-12 18:12:06 +00:00 |
cprestore.ll
|
Fix test cases.
|
2012-05-12 03:25:16 +00:00 |
ctlz.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
DbgValueOtherTargets.test
|
Remove unnecessary leading comment characters in lit-only file
|
2013-03-18 22:08:16 +00:00 |
disable-tail-merge.ll
|
[mips] Test case for r192124.
|
2013-10-07 21:32:57 +00:00 |
div_rem.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
div.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
divrem.ll
|
[mips] Transfer kill flag to the newly created operand.
|
2013-10-15 01:06:30 +00:00 |
divu_remu.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
divu.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
double2int.ll
|
Fix test cases.
|
2011-09-09 23:14:58 +00:00 |
dsp-patterns-cmp-vselect.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
dsp-patterns.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
dsp-r1.ll
|
[mips] Split the DSP control register and define one register for each field of
|
2013-05-03 18:37:49 +00:00 |
dsp-r2.ll
|
MIPS DSP: add operands to make sure instruction strings are being matched.
|
2012-09-28 21:23:16 +00:00 |
dsp-vec-load-store.ll
|
[mips] Expand vector truncating stores and extending loads.
|
2013-08-02 19:23:33 +00:00 |
eh-dwarf-cfa.ll
|
[mips] Custom-lower ISD::FRAME_TO_ARGS_OFFSET node.
|
2012-11-07 19:10:58 +00:00 |
eh-return32.ll
|
[mips] Small update to the implementation of eh.return for Mips.
|
2013-04-02 23:02:07 +00:00 |
eh-return64.ll
|
More test coverage for addFrameMove.
|
2013-05-16 19:44:40 +00:00 |
eh.ll
|
TBAA: remove !tbaa from testing cases if not used.
|
2013-04-30 17:52:57 +00:00 |
emit-big-cst.ll
|
Teach AsmPrinter how to print odd constants.
|
2013-06-07 18:36:03 +00:00 |
ex2.ll
|
Cleaning up of prologue/epilogue code for Mips16. First step
|
2013-12-08 16:51:52 +00:00 |
extins.ll
|
[mips] Do not generate INS/EXT nodes if target does not have support for
|
2013-10-09 23:36:17 +00:00 |
f16abs.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
fabs.ll
|
Add test triples to fix win32 failures. Revert workaround from r161292.
|
2012-08-08 20:31:37 +00:00 |
fastcc.ll
|
Implement fastcc calling convention for MIPS.
|
2012-06-13 18:06:00 +00:00 |
fcopysign-f32-f64.ll
|
[mips] Implement MipsTargetMachine::getInstrItineraryData().
|
2013-07-12 23:33:22 +00:00 |
fcopysign.ll
|
Fix bugs in lowering of FCOPYSIGN nodes.
|
2012-04-11 22:13:04 +00:00 |
fixdfsf.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
fmadd1.ll
|
Add definitions of floating point multiply add/sub and negative multiply
|
2012-02-25 00:21:52 +00:00 |
fneg.ll
|
Revert changes that were accidentally committed.
|
2012-04-11 23:19:55 +00:00 |
fp16instrinsmc.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
fp16mix.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
fp16static.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
fp-indexed-ls.ll
|
Fix type of LUXC1 and SUXC1. These instructions were incorrectly defined as
|
2012-07-31 18:16:49 +00:00 |
fp-spill-reload.ll
|
Make register FP allocatable if the compiled function does not have dynamic
|
2012-05-09 01:38:13 +00:00 |
fpbr.ll
|
Flip the new block-placement pass to be on by default.
|
2012-04-16 13:49:17 +00:00 |
fpneeded.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
fpnotneeded.ll
|
Fix a bug related to constant islands for Mips16 and mips16/32 dual mode.
|
2013-11-26 20:38:40 +00:00 |
fptr2.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
frame-address.ll
|
Add more addFrameMove test coverage.
|
2013-05-16 14:51:26 +00:00 |
frem.ll
|
Expand FREM.
|
2012-03-29 18:43:11 +00:00 |
global-address.ll
|
Add lines in global-address.ll to test N32 and N64 code generation.
|
2012-04-06 20:23:36 +00:00 |
global-pointer-reg.ll
|
Make the following changes in MipsAsmPrinter.cpp:
|
2012-05-12 00:48:43 +00:00 |
gpreg-lazy-binding.ll
|
[mips] Print move instructions.
|
2013-03-04 22:25:01 +00:00 |
gprestore.ll
|
Fix test cases.
|
2012-05-12 03:25:16 +00:00 |
helloworld.ll
|
Cleaning up of prologue/epilogue code for Mips16. First step
|
2013-12-08 16:51:52 +00:00 |
hf1_body.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
hf16_1.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
hf16call32_body.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
hf16call32.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
hfptrcall.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
i32k.ll
|
Check in conditional branches for constant islands. Still need to finish
|
2013-11-28 00:56:37 +00:00 |
i64arg.ll
|
[mips] Make sure there is a chain edge dependency between loads that read
|
2013-11-09 02:38:51 +00:00 |
imm.ll
|
Add a test case for r146900.
|
2011-12-19 20:24:28 +00:00 |
indirectcall.ll
|
jalr should use t9 ($25) for indirect calls regardless of the relocation model
|
2011-12-09 01:45:12 +00:00 |
init-array.ll
|
Fix UseInitArray option for MIPS target.
|
2012-09-05 06:17:17 +00:00 |
inlineasm64.ll
|
Have getRegForInlineAsmConstraint return the correct register class when target
|
2012-01-04 02:45:01 +00:00 |
inlineasm_constraint.ll
|
Mips specific inline assembler constraint 'R'
|
2013-03-04 21:33:15 +00:00 |
inlineasm-cnstrnt-bad-I-1.ll
|
Add support for the 'I' inline asm constraint. Also add tests
|
2012-05-07 03:13:32 +00:00 |
inlineasm-cnstrnt-bad-J.ll
|
Support the 'J' constraint.
|
2012-05-07 03:13:42 +00:00 |
inlineasm-cnstrnt-bad-K.ll
|
Add support for the inline asm constraint 'K'.
|
2012-05-07 05:46:29 +00:00 |
inlineasm-cnstrnt-bad-L.ll
|
Add support for the 'L' inline asm constraint.
|
2012-05-07 05:46:37 +00:00 |
inlineasm-cnstrnt-bad-N.ll
|
Add support for the 'N' inline asm constraint.
|
2012-05-07 05:46:43 +00:00 |
inlineasm-cnstrnt-bad-O.ll
|
Add support for the 'O' constraint.
|
2012-05-07 05:46:48 +00:00 |
inlineasm-cnstrnt-bad-P.ll
|
Add support for the 'P' constraint.
|
2012-05-07 06:25:02 +00:00 |
inlineasm-cnstrnt-reg64.ll
|
Add support for the 'I' inline asm constraint. Also add tests
|
2012-05-07 03:13:32 +00:00 |
inlineasm-cnstrnt-reg.ll
|
Add support for the 'l' constraint.
|
2012-05-07 06:25:15 +00:00 |
inlineasm-operand-code.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
inlineasmmemop.ll
|
Mips specific inline asm memory operand modifier test case
|
2013-04-11 19:39:19 +00:00 |
int-to-float-conversion.ll
|
Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.
|
2013-07-13 20:38:47 +00:00 |
internalfunc.ll
|
Fix test cases.
|
2012-05-12 03:25:16 +00:00 |
jtstat.ll
|
Test case hygiene.
|
2013-03-09 18:25:40 +00:00 |
largefr1.ll
|
Check in conditional branches for constant islands. Still need to finish
|
2013-11-28 00:56:37 +00:00 |
largeimm1.ll
|
[mips] Use register number instead of name to print register $AT.
|
2012-11-02 21:26:03 +00:00 |
largeimmprinting.ll
|
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
|
2013-09-28 00:12:32 +00:00 |
lazy-binding.ll
|
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
|
2013-09-28 00:12:32 +00:00 |
lb1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
lbu1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
lcb2.ll
|
Check in conditional branches for constant islands. Still need to finish
|
2013-11-28 00:56:37 +00:00 |
lcb3c.ll
|
Part 1 of 3 patches that completes very long conditional branches
|
2013-11-29 22:32:56 +00:00 |
lcb4a.ll
|
final patch for very long conditional branches for mips16 constant islands.
|
2013-12-03 23:42:51 +00:00 |
lcb5.ll
|
final patch for very long conditional branches for mips16 constant islands.
|
2013-12-03 23:42:51 +00:00 |
lh1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
lhu1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
lit.local.cfg
|
[tests] Cleanup initialization of test suffixes.
|
2013-08-16 00:37:11 +00:00 |
llcarry.ll
|
Implement carry for subtract/add for mips16
|
2012-10-26 04:46:26 +00:00 |
load-store-left-right.ll
|
Rename test/CodeGen/Mips/load-shift-left-right.ll.
|
2012-06-04 17:50:36 +00:00 |
longbranch.ll
|
[mips] Fix a bug in MipsLongBranch::replaceBranch, which was erasing
|
2013-10-04 20:51:40 +00:00 |
machineverifier.ll
|
Make machine verifier check the first instruction of the last bundle instead of
|
2012-06-14 20:51:13 +00:00 |
madd-msub.ll
|
[mips] Fix DSP instructions to have explicit accumulator register operands.
|
2013-03-30 01:58:00 +00:00 |
mbrsize4a.ll
|
Add, to constant islands, long jumps similar to ARM far branch.
|
2013-11-21 05:13:23 +00:00 |
memcpy.ll
|
Set a higher value for maxStoresPerMemcpy in MipsISelLowering.cpp.
|
2012-06-13 19:33:32 +00:00 |
mips16_32_1.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_3.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_4.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_5.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_6.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_7.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_8.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_9.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_32_10.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
mips16_fpret.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
mips16ex.ll
|
This patch is needed to make c++ exceptions work for mips16.
|
2012-12-16 04:00:45 +00:00 |
mips16fpe.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
mips64-f128-call.ll
|
[mips] Add a line which checks function name. Rename file.
|
2013-03-06 01:58:03 +00:00 |
mips64-f128.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
mips64-fp-indexed-ls.ll
|
Fix type of LUXC1 and SUXC1. These instructions were incorrectly defined as
|
2012-07-31 18:16:49 +00:00 |
mips64-libcall.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
mips64-sret.ll
|
[mips] Print move instructions.
|
2013-03-04 22:25:01 +00:00 |
mips64countleading.ll
|
Expand 64-bit CTLZ nodes if target architecture does not support it. Add test
|
2011-12-21 00:20:27 +00:00 |
mips64directive.ll
|
64-bit data directive.
|
2011-12-20 22:52:19 +00:00 |
mips64ext.ll
|
Pattern for f32 to i64 conversion.
|
2012-01-24 22:05:25 +00:00 |
mips64extins.ll
|
Add definitions of 64-bit extract and insert instrucions and make
|
2011-12-05 21:26:34 +00:00 |
mips64fpimm0.ll
|
Add code in MipsDAGToDAGISel for selecting constant +0.0.
|
2011-12-20 22:25:50 +00:00 |
mips64fpldst.ll
|
Reapply 154038 without the failing test.
|
2012-04-04 22:16:36 +00:00 |
mips64imm.ll
|
Lower 64-bit immediates using MipsAnalyzeImmediate that has just been added.
|
2012-01-25 03:01:35 +00:00 |
mips64instrs.ll
|
[mips] Transfer kill flag to the newly created operand.
|
2013-10-15 01:06:30 +00:00 |
mips64intldst.ll
|
Reapply 154038 without the failing test.
|
2012-04-04 22:16:36 +00:00 |
mips64lea.ll
|
Test case for r147232.
|
2011-12-24 03:05:43 +00:00 |
mips64load-store-left-right.ll
|
Add a test case for mips64 unaligned load/store instructions.
|
2012-06-04 17:57:06 +00:00 |
mips64muldiv.ll
|
Add function MipsDAGToDAGISel::SelectMULT and factor out code that generates
|
2011-12-20 23:10:57 +00:00 |
mips64shift.ll
|
Remove definitions of double word shift plus 32 instructions. Assembler or
|
2011-12-19 19:44:09 +00:00 |
mipslopat.ll
|
Upgrade syntax of tests using volatile instructions to use 'load volatile' instead of 'volatile load', which is archaic.
|
2011-11-27 06:54:59 +00:00 |
misha.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
mno-ldc1-sdc1.ll
|
[mips] Fix typos.
|
2013-09-07 01:14:42 +00:00 |
mul.ll
|
Patch for integer multiply, signed/unsigned, long/long long.
|
2012-10-05 18:27:54 +00:00 |
mulll.ll
|
Patch for integer multiply, signed/unsigned, long/long long.
|
2012-10-05 18:27:54 +00:00 |
mulull.ll
|
Patch for integer multiply, signed/unsigned, long/long long.
|
2012-10-05 18:27:54 +00:00 |
neg1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
nomips16.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
not1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
null.ll
|
Change mips16 delay slot jumps to non delay slot forms by default.
|
2012-10-30 00:54:49 +00:00 |
o32_cc_byval.ll
|
[mips] Set instruction itineraries of loads, stores and conditional moves.
|
2013-09-06 23:28:24 +00:00 |
o32_cc_vararg.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
o32_cc.ll
|
[mips] Fix a bug in function CC_MipsO32_FP64. The second double precision
|
2013-11-12 22:16:18 +00:00 |
optimize-fp-math.ll
|
Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.
|
2013-07-13 20:38:47 +00:00 |
or1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
powif64_16.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
private.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
ra-allocatable.ll
|
TBAA: remove !tbaa from testing cases when they are not needed.
|
2013-08-21 22:20:53 +00:00 |
rdhwr-directives.ll
|
test case for r159770.
|
2012-07-05 19:29:31 +00:00 |
rem.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
remat-immed-load.ll
|
[mips] Set flag isAsCheapAsAMove flag on instruction LUi.
|
2012-11-03 00:26:02 +00:00 |
remu.ll
|
Div, Rem int/unsigned int
|
2012-10-12 02:01:09 +00:00 |
return_address.ll
|
[mips] Print move instructions.
|
2013-03-04 22:25:01 +00:00 |
return-vector.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
rotate.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
sb1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
sel1c.ll
|
[mips] Small code generation improvement for conditional operator (select)
|
2013-12-05 12:07:05 +00:00 |
sel2c.ll
|
[mips] Small code generation improvement for conditional operator (select)
|
2013-12-05 12:07:05 +00:00 |
select.ll
|
TBAA: remove !tbaa from testing cases if not used.
|
2013-04-30 17:52:57 +00:00 |
selectcc.ll
|
Track IR ordering of SelectionDAG nodes 4/4.
|
2013-05-25 03:26:51 +00:00 |
seleq.ll
|
Beginning of expanding all current mips16 macro/pseudo instruction sequences.
|
2013-02-18 00:59:04 +00:00 |
seleqk.ll
|
Expand pseudos BteqzT8CmpiX16 and BtnezT8CmpiX16.
|
2013-02-19 00:20:58 +00:00 |
selgek.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
selgt.ll
|
Expand pseudo/macro BteqzT8SltX16.
|
2013-02-18 04:04:26 +00:00 |
selle.ll
|
Expand macro/pseudo instructions BtnezT8SltX16 and BtnezT8SltuX16.
|
2013-02-18 05:43:03 +00:00 |
selltk.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
selne.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
selnek.ll
|
Convert CodeGen/*/*.ll tests to use the new CHECK-LABEL for easier debugging. No functionality change and all tests pass after conversion.
|
2013-07-13 20:38:47 +00:00 |
selpat.ll
|
Expand pseudos/macros for Selt. This is the last of the complex
|
2013-02-23 03:09:56 +00:00 |
selTBteqzCmpi.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
selTBtnezCmpi.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
selTBtnezSlti.ll
|
Expand mips16 SelT form pseudso/macros.
|
2013-02-22 05:10:51 +00:00 |
setcc-se.ll
|
[mips] Print instructions "beq", "bne" and "or" using assembler pseudo
|
2013-07-26 18:34:25 +00:00 |
seteq.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
seteqz.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setge.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setgek.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setle.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setlt.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setltk.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setne.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setuge.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setugt.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setule.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setult.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
setultk.ll
|
Expand pseudos/macros:
|
2013-02-20 05:45:15 +00:00 |
sh1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
shift-parts.ll
|
Expand 64-bit shifts if target ABI is O32.
|
2012-05-09 00:55:21 +00:00 |
simplebr.ll
|
Change the default branch instruction to be the 16 bit variety for mips16.
|
2013-11-12 02:27:12 +00:00 |
sint-fp-store_pattern.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
sitofp-selectcc-opt.ll
|
Test case for r160036.
|
2012-07-11 19:50:46 +00:00 |
sll1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
sll2.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
small-section-reserve-gp.ll
|
In MipsDAGToDAGISel::SelectAddr, fold add node into address operand, if its
|
2012-08-24 20:21:49 +00:00 |
spill-copy-acreg.ll
|
[mips] Handle reading, writing or copying of ccond field of DSP control
|
2013-05-02 23:07:05 +00:00 |
sra1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
sra2.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
srl1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
srl2.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
stack-alignment.ll
|
[mips] Partially revert r193641. Stack alignment should not be determined by
|
2013-11-11 21:49:03 +00:00 |
stackcoloring.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
stacksize.ll
|
Test case for r159240.
|
2012-06-27 00:40:34 +00:00 |
stchar.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
stldst.ll
|
checking test case for r164811. was an omission to not check this in. this was already approved
|
2012-10-01 21:35:06 +00:00 |
sub1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
sub2.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
swzero.ll
|
Don't modify MO while use_iterator is still pointing to it.
|
2012-08-09 22:08:24 +00:00 |
tailcall.ll
|
[mips] Make sure there is a chain edge dependency between loads that read
|
2013-11-09 02:38:51 +00:00 |
tls16_2.ll
|
Implement MipsHi for mips16
|
2012-10-27 00:57:14 +00:00 |
tls16.ll
|
implement mips16 tls global addr
|
2012-10-26 22:57:32 +00:00 |
tls-alias.ll
|
[mips] Implement MipsTargetMachine::getInstrItineraryData().
|
2013-07-12 23:33:22 +00:00 |
tls-models.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
tls.ll
|
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
|
2013-07-14 06:24:09 +00:00 |
tnaked.ll
|
Update to remove the no-frame-pointer-elim-non-leaf flag if it was set to 'false'.
|
2013-08-22 21:28:54 +00:00 |
trap1.ll
|
[Mips] Adjust float ABI settings in case of MIPS16 mode.
|
2013-11-19 12:20:17 +00:00 |
trap.ll
|
[mips] Implement llvm.trap intrinsic.
|
2013-07-26 20:58:55 +00:00 |
uitofp.ll
|
Fix bug 13532.
|
2012-08-28 02:12:42 +00:00 |
ul1.ll
|
Handled unaligned load/stores properly in Mips16
|
2012-09-15 01:02:03 +00:00 |
unalignedload.ll
|
[mips] Implement MipsTargetMachine::getInstrItineraryData().
|
2013-07-12 23:33:22 +00:00 |
vector-load-store.ll
|
MIPS DSP: add vector load/store patterns.
|
2012-09-27 01:50:59 +00:00 |
vector-setcc.ll
|
[mips] MipsTargetLowering::getSetCCResultType should return a vector type if
|
2013-01-04 20:06:01 +00:00 |
weak.ll
|
Define WeakRefDirective.
|
2011-05-25 23:30:30 +00:00 |
xor1.ll
|
1. Redo mips16 instructions to avoid multiple opcodes for same instruction.
|
2012-08-03 22:57:02 +00:00 |
zeroreg.ll
|
TBAA: remove !tbaa from testing cases if not used.
|
2013-04-30 17:52:57 +00:00 |