llvm-6502/lib/Transforms/Scalar/LICM.cpp
Dan Gohman f37cfed791 Grab an LLVM Context from an instruction that exists rather than one
that is deleted in some situations. This fixes a use-after-free.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82903 91177308-0d34-0410-b5e6-96231b3b80d8
2009-09-27 16:10:30 +00:00

882 lines
34 KiB
C++

//===-- LICM.cpp - Loop Invariant Code Motion Pass ------------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This pass performs loop invariant code motion, attempting to remove as much
// code from the body of a loop as possible. It does this by either hoisting
// code into the preheader block, or by sinking code to the exit blocks if it is
// safe. This pass also promotes must-aliased memory locations in the loop to
// live in registers, thus hoisting and sinking "invariant" loads and stores.
//
// This pass uses alias analysis for two purposes:
//
// 1. Moving loop invariant loads and calls out of loops. If we can determine
// that a load or call inside of a loop never aliases anything stored to,
// we can hoist it or sink it like any other instruction.
// 2. Scalar Promotion of Memory - If there is a store instruction inside of
// the loop, we try to move the store to happen AFTER the loop instead of
// inside of the loop. This can only happen if a few conditions are true:
// A. The pointer stored through is loop invariant
// B. There are no stores or loads in the loop which _may_ alias the
// pointer. There are no calls in the loop which mod/ref the pointer.
// If these conditions are true, we can promote the loads and stores in the
// loop of the pointer to use a temporary alloca'd variable. We then use
// the mem2reg functionality to construct the appropriate SSA form for the
// variable.
//
//===----------------------------------------------------------------------===//
#define DEBUG_TYPE "licm"
#include "llvm/Transforms/Scalar.h"
#include "llvm/Constants.h"
#include "llvm/DerivedTypes.h"
#include "llvm/Instructions.h"
#include "llvm/Target/TargetData.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopPass.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/AliasSetTracker.h"
#include "llvm/Analysis/Dominators.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Transforms/Utils/PromoteMemToReg.h"
#include "llvm/Support/CFG.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Support/Debug.h"
#include "llvm/ADT/Statistic.h"
#include <algorithm>
using namespace llvm;
STATISTIC(NumSunk , "Number of instructions sunk out of loop");
STATISTIC(NumHoisted , "Number of instructions hoisted out of loop");
STATISTIC(NumMovedLoads, "Number of load insts hoisted or sunk");
STATISTIC(NumMovedCalls, "Number of call insts hoisted or sunk");
STATISTIC(NumPromoted , "Number of memory locations promoted to registers");
static cl::opt<bool>
DisablePromotion("disable-licm-promotion", cl::Hidden,
cl::desc("Disable memory promotion in LICM pass"));
// This feature is currently disabled by default because CodeGen is not yet
// capable of rematerializing these constants in PIC mode, so it can lead to
// degraded performance. Compile test/CodeGen/X86/remat-constant.ll with
// -relocation-model=pic to see an example of this.
static cl::opt<bool>
EnableLICMConstantMotion("enable-licm-constant-variables", cl::Hidden,
cl::desc("Enable hoisting/sinking of constant "
"global variables"));
namespace {
struct LICM : public LoopPass {
static char ID; // Pass identification, replacement for typeid
LICM() : LoopPass(&ID) {}
virtual bool runOnLoop(Loop *L, LPPassManager &LPM);
/// This transformation requires natural loop information & requires that
/// loop preheaders be inserted into the CFG...
///
virtual void getAnalysisUsage(AnalysisUsage &AU) const {
AU.setPreservesCFG();
AU.addRequiredID(LoopSimplifyID);
AU.addRequired<LoopInfo>();
AU.addRequired<DominatorTree>();
AU.addRequired<DominanceFrontier>(); // For scalar promotion (mem2reg)
AU.addRequired<AliasAnalysis>();
AU.addPreserved<ScalarEvolution>();
AU.addPreserved<DominanceFrontier>();
AU.addPreservedID(LoopSimplifyID);
}
bool doFinalization() {
// Free the values stored in the map
for (std::map<Loop *, AliasSetTracker *>::iterator
I = LoopToAliasMap.begin(), E = LoopToAliasMap.end(); I != E; ++I)
delete I->second;
LoopToAliasMap.clear();
return false;
}
private:
// Various analyses that we use...
AliasAnalysis *AA; // Current AliasAnalysis information
LoopInfo *LI; // Current LoopInfo
DominatorTree *DT; // Dominator Tree for the current Loop...
DominanceFrontier *DF; // Current Dominance Frontier
// State that is updated as we process loops
bool Changed; // Set to true when we change anything.
BasicBlock *Preheader; // The preheader block of the current loop...
Loop *CurLoop; // The current loop we are working on...
AliasSetTracker *CurAST; // AliasSet information for the current loop...
std::map<Loop *, AliasSetTracker *> LoopToAliasMap;
/// cloneBasicBlockAnalysis - Simple Analysis hook. Clone alias set info.
void cloneBasicBlockAnalysis(BasicBlock *From, BasicBlock *To, Loop *L);
/// deleteAnalysisValue - Simple Analysis hook. Delete value V from alias
/// set.
void deleteAnalysisValue(Value *V, Loop *L);
/// SinkRegion - Walk the specified region of the CFG (defined by all blocks
/// dominated by the specified block, and that are in the current loop) in
/// reverse depth first order w.r.t the DominatorTree. This allows us to
/// visit uses before definitions, allowing us to sink a loop body in one
/// pass without iteration.
///
void SinkRegion(DomTreeNode *N);
/// HoistRegion - Walk the specified region of the CFG (defined by all
/// blocks dominated by the specified block, and that are in the current
/// loop) in depth first order w.r.t the DominatorTree. This allows us to
/// visit definitions before uses, allowing us to hoist a loop body in one
/// pass without iteration.
///
void HoistRegion(DomTreeNode *N);
/// inSubLoop - Little predicate that returns true if the specified basic
/// block is in a subloop of the current one, not the current one itself.
///
bool inSubLoop(BasicBlock *BB) {
assert(CurLoop->contains(BB) && "Only valid if BB is IN the loop");
for (Loop::iterator I = CurLoop->begin(), E = CurLoop->end(); I != E; ++I)
if ((*I)->contains(BB))
return true; // A subloop actually contains this block!
return false;
}
/// isExitBlockDominatedByBlockInLoop - This method checks to see if the
/// specified exit block of the loop is dominated by the specified block
/// that is in the body of the loop. We use these constraints to
/// dramatically limit the amount of the dominator tree that needs to be
/// searched.
bool isExitBlockDominatedByBlockInLoop(BasicBlock *ExitBlock,
BasicBlock *BlockInLoop) const {
// If the block in the loop is the loop header, it must be dominated!
BasicBlock *LoopHeader = CurLoop->getHeader();
if (BlockInLoop == LoopHeader)
return true;
DomTreeNode *BlockInLoopNode = DT->getNode(BlockInLoop);
DomTreeNode *IDom = DT->getNode(ExitBlock);
// Because the exit block is not in the loop, we know we have to get _at
// least_ its immediate dominator.
do {
// Get next Immediate Dominator.
IDom = IDom->getIDom();
// If we have got to the header of the loop, then the instructions block
// did not dominate the exit node, so we can't hoist it.
if (IDom->getBlock() == LoopHeader)
return false;
} while (IDom != BlockInLoopNode);
return true;
}
/// sink - When an instruction is found to only be used outside of the loop,
/// this function moves it to the exit blocks and patches up SSA form as
/// needed.
///
void sink(Instruction &I);
/// hoist - When an instruction is found to only use loop invariant operands
/// that is safe to hoist, this instruction is called to do the dirty work.
///
void hoist(Instruction &I);
/// isSafeToExecuteUnconditionally - Only sink or hoist an instruction if it
/// is not a trapping instruction or if it is a trapping instruction and is
/// guaranteed to execute.
///
bool isSafeToExecuteUnconditionally(Instruction &I);
/// pointerInvalidatedByLoop - Return true if the body of this loop may
/// store into the memory location pointed to by V.
///
bool pointerInvalidatedByLoop(Value *V, unsigned Size) {
// Check to see if any of the basic blocks in CurLoop invalidate *V.
return CurAST->getAliasSetForPointer(V, Size).isMod();
}
bool canSinkOrHoistInst(Instruction &I);
bool isLoopInvariantInst(Instruction &I);
bool isNotUsedInLoop(Instruction &I);
/// PromoteValuesInLoop - Look at the stores in the loop and promote as many
/// to scalars as we can.
///
void PromoteValuesInLoop();
/// FindPromotableValuesInLoop - Check the current loop for stores to
/// definite pointers, which are not loaded and stored through may aliases.
/// If these are found, create an alloca for the value, add it to the
/// PromotedValues list, and keep track of the mapping from value to
/// alloca...
///
void FindPromotableValuesInLoop(
std::vector<std::pair<AllocaInst*, Value*> > &PromotedValues,
std::map<Value*, AllocaInst*> &Val2AlMap);
};
}
char LICM::ID = 0;
static RegisterPass<LICM> X("licm", "Loop Invariant Code Motion");
Pass *llvm::createLICMPass() { return new LICM(); }
/// Hoist expressions out of the specified loop. Note, alias info for inner
/// loop is not preserved so it is not a good idea to run LICM multiple
/// times on one loop.
///
bool LICM::runOnLoop(Loop *L, LPPassManager &LPM) {
Changed = false;
// Get our Loop and Alias Analysis information...
LI = &getAnalysis<LoopInfo>();
AA = &getAnalysis<AliasAnalysis>();
DF = &getAnalysis<DominanceFrontier>();
DT = &getAnalysis<DominatorTree>();
CurAST = new AliasSetTracker(*AA);
// Collect Alias info from subloops
for (Loop::iterator LoopItr = L->begin(), LoopItrE = L->end();
LoopItr != LoopItrE; ++LoopItr) {
Loop *InnerL = *LoopItr;
AliasSetTracker *InnerAST = LoopToAliasMap[InnerL];
assert (InnerAST && "Where is my AST?");
// What if InnerLoop was modified by other passes ?
CurAST->add(*InnerAST);
}
CurLoop = L;
// Get the preheader block to move instructions into...
Preheader = L->getLoopPreheader();
assert(Preheader&&"Preheader insertion pass guarantees we have a preheader!");
// Loop over the body of this loop, looking for calls, invokes, and stores.
// Because subloops have already been incorporated into AST, we skip blocks in
// subloops.
//
for (Loop::block_iterator I = L->block_begin(), E = L->block_end();
I != E; ++I) {
BasicBlock *BB = *I;
if (LI->getLoopFor(BB) == L) // Ignore blocks in subloops...
CurAST->add(*BB); // Incorporate the specified basic block
}
// We want to visit all of the instructions in this loop... that are not parts
// of our subloops (they have already had their invariants hoisted out of
// their loop, into this loop, so there is no need to process the BODIES of
// the subloops).
//
// Traverse the body of the loop in depth first order on the dominator tree so
// that we are guaranteed to see definitions before we see uses. This allows
// us to sink instructions in one pass, without iteration. After sinking
// instructions, we perform another pass to hoist them out of the loop.
//
SinkRegion(DT->getNode(L->getHeader()));
HoistRegion(DT->getNode(L->getHeader()));
// Now that all loop invariants have been removed from the loop, promote any
// memory references to scalars that we can...
if (!DisablePromotion)
PromoteValuesInLoop();
// Clear out loops state information for the next iteration
CurLoop = 0;
Preheader = 0;
LoopToAliasMap[L] = CurAST;
return Changed;
}
/// SinkRegion - Walk the specified region of the CFG (defined by all blocks
/// dominated by the specified block, and that are in the current loop) in
/// reverse depth first order w.r.t the DominatorTree. This allows us to visit
/// uses before definitions, allowing us to sink a loop body in one pass without
/// iteration.
///
void LICM::SinkRegion(DomTreeNode *N) {
assert(N != 0 && "Null dominator tree node?");
BasicBlock *BB = N->getBlock();
// If this subregion is not in the top level loop at all, exit.
if (!CurLoop->contains(BB)) return;
// We are processing blocks in reverse dfo, so process children first...
const std::vector<DomTreeNode*> &Children = N->getChildren();
for (unsigned i = 0, e = Children.size(); i != e; ++i)
SinkRegion(Children[i]);
// Only need to process the contents of this block if it is not part of a
// subloop (which would already have been processed).
if (inSubLoop(BB)) return;
for (BasicBlock::iterator II = BB->end(); II != BB->begin(); ) {
Instruction &I = *--II;
// Check to see if we can sink this instruction to the exit blocks
// of the loop. We can do this if the all users of the instruction are
// outside of the loop. In this case, it doesn't even matter if the
// operands of the instruction are loop invariant.
//
if (isNotUsedInLoop(I) && canSinkOrHoistInst(I)) {
++II;
sink(I);
}
}
}
/// HoistRegion - Walk the specified region of the CFG (defined by all blocks
/// dominated by the specified block, and that are in the current loop) in depth
/// first order w.r.t the DominatorTree. This allows us to visit definitions
/// before uses, allowing us to hoist a loop body in one pass without iteration.
///
void LICM::HoistRegion(DomTreeNode *N) {
assert(N != 0 && "Null dominator tree node?");
BasicBlock *BB = N->getBlock();
// If this subregion is not in the top level loop at all, exit.
if (!CurLoop->contains(BB)) return;
// Only need to process the contents of this block if it is not part of a
// subloop (which would already have been processed).
if (!inSubLoop(BB))
for (BasicBlock::iterator II = BB->begin(), E = BB->end(); II != E; ) {
Instruction &I = *II++;
// Try hoisting the instruction out to the preheader. We can only do this
// if all of the operands of the instruction are loop invariant and if it
// is safe to hoist the instruction.
//
if (isLoopInvariantInst(I) && canSinkOrHoistInst(I) &&
isSafeToExecuteUnconditionally(I))
hoist(I);
}
const std::vector<DomTreeNode*> &Children = N->getChildren();
for (unsigned i = 0, e = Children.size(); i != e; ++i)
HoistRegion(Children[i]);
}
/// canSinkOrHoistInst - Return true if the hoister and sinker can handle this
/// instruction.
///
bool LICM::canSinkOrHoistInst(Instruction &I) {
// Loads have extra constraints we have to verify before we can hoist them.
if (LoadInst *LI = dyn_cast<LoadInst>(&I)) {
if (LI->isVolatile())
return false; // Don't hoist volatile loads!
// Loads from constant memory are always safe to move, even if they end up
// in the same alias set as something that ends up being modified.
if (EnableLICMConstantMotion &&
AA->pointsToConstantMemory(LI->getOperand(0)))
return true;
// Don't hoist loads which have may-aliased stores in loop.
unsigned Size = 0;
if (LI->getType()->isSized())
Size = AA->getTypeStoreSize(LI->getType());
return !pointerInvalidatedByLoop(LI->getOperand(0), Size);
} else if (CallInst *CI = dyn_cast<CallInst>(&I)) {
// Handle obvious cases efficiently.
AliasAnalysis::ModRefBehavior Behavior = AA->getModRefBehavior(CI);
if (Behavior == AliasAnalysis::DoesNotAccessMemory)
return true;
else if (Behavior == AliasAnalysis::OnlyReadsMemory) {
// If this call only reads from memory and there are no writes to memory
// in the loop, we can hoist or sink the call as appropriate.
bool FoundMod = false;
for (AliasSetTracker::iterator I = CurAST->begin(), E = CurAST->end();
I != E; ++I) {
AliasSet &AS = *I;
if (!AS.isForwardingAliasSet() && AS.isMod()) {
FoundMod = true;
break;
}
}
if (!FoundMod) return true;
}
// FIXME: This should use mod/ref information to see if we can hoist or sink
// the call.
return false;
}
// Otherwise these instructions are hoistable/sinkable
return isa<BinaryOperator>(I) || isa<CastInst>(I) ||
isa<SelectInst>(I) || isa<GetElementPtrInst>(I) || isa<CmpInst>(I) ||
isa<InsertElementInst>(I) || isa<ExtractElementInst>(I) ||
isa<ShuffleVectorInst>(I);
}
/// isNotUsedInLoop - Return true if the only users of this instruction are
/// outside of the loop. If this is true, we can sink the instruction to the
/// exit blocks of the loop.
///
bool LICM::isNotUsedInLoop(Instruction &I) {
for (Value::use_iterator UI = I.use_begin(), E = I.use_end(); UI != E; ++UI) {
Instruction *User = cast<Instruction>(*UI);
if (PHINode *PN = dyn_cast<PHINode>(User)) {
// PHI node uses occur in predecessor blocks!
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == &I)
if (CurLoop->contains(PN->getIncomingBlock(i)))
return false;
} else if (CurLoop->contains(User->getParent())) {
return false;
}
}
return true;
}
/// isLoopInvariantInst - Return true if all operands of this instruction are
/// loop invariant. We also filter out non-hoistable instructions here just for
/// efficiency.
///
bool LICM::isLoopInvariantInst(Instruction &I) {
// The instruction is loop invariant if all of its operands are loop-invariant
for (unsigned i = 0, e = I.getNumOperands(); i != e; ++i)
if (!CurLoop->isLoopInvariant(I.getOperand(i)))
return false;
// If we got this far, the instruction is loop invariant!
return true;
}
/// sink - When an instruction is found to only be used outside of the loop,
/// this function moves it to the exit blocks and patches up SSA form as needed.
/// This method is guaranteed to remove the original instruction from its
/// position, and may either delete it or move it to outside of the loop.
///
void LICM::sink(Instruction &I) {
DEBUG(errs() << "LICM sinking instruction: " << I);
SmallVector<BasicBlock*, 8> ExitBlocks;
CurLoop->getExitBlocks(ExitBlocks);
if (isa<LoadInst>(I)) ++NumMovedLoads;
else if (isa<CallInst>(I)) ++NumMovedCalls;
++NumSunk;
Changed = true;
// The case where there is only a single exit node of this loop is common
// enough that we handle it as a special (more efficient) case. It is more
// efficient to handle because there are no PHI nodes that need to be placed.
if (ExitBlocks.size() == 1) {
if (!isExitBlockDominatedByBlockInLoop(ExitBlocks[0], I.getParent())) {
// Instruction is not used, just delete it.
CurAST->deleteValue(&I);
if (!I.use_empty()) // If I has users in unreachable blocks, eliminate.
I.replaceAllUsesWith(UndefValue::get(I.getType()));
I.eraseFromParent();
} else {
// Move the instruction to the start of the exit block, after any PHI
// nodes in it.
I.removeFromParent();
BasicBlock::iterator InsertPt = ExitBlocks[0]->getFirstNonPHI();
ExitBlocks[0]->getInstList().insert(InsertPt, &I);
}
} else if (ExitBlocks.empty()) {
// The instruction is actually dead if there ARE NO exit blocks.
CurAST->deleteValue(&I);
if (!I.use_empty()) // If I has users in unreachable blocks, eliminate.
I.replaceAllUsesWith(UndefValue::get(I.getType()));
I.eraseFromParent();
} else {
// Otherwise, if we have multiple exits, use the PromoteMem2Reg function to
// do all of the hard work of inserting PHI nodes as necessary. We convert
// the value into a stack object to get it to do this.
// Firstly, we create a stack object to hold the value...
AllocaInst *AI = 0;
if (I.getType() != Type::getVoidTy(I.getContext())) {
AI = new AllocaInst(I.getType(), 0, I.getName(),
I.getParent()->getParent()->getEntryBlock().begin());
CurAST->add(AI);
}
// Secondly, insert load instructions for each use of the instruction
// outside of the loop.
while (!I.use_empty()) {
Instruction *U = cast<Instruction>(I.use_back());
// If the user is a PHI Node, we actually have to insert load instructions
// in all predecessor blocks, not in the PHI block itself!
if (PHINode *UPN = dyn_cast<PHINode>(U)) {
// Only insert into each predecessor once, so that we don't have
// different incoming values from the same block!
std::map<BasicBlock*, Value*> InsertedBlocks;
for (unsigned i = 0, e = UPN->getNumIncomingValues(); i != e; ++i)
if (UPN->getIncomingValue(i) == &I) {
BasicBlock *Pred = UPN->getIncomingBlock(i);
Value *&PredVal = InsertedBlocks[Pred];
if (!PredVal) {
// Insert a new load instruction right before the terminator in
// the predecessor block.
PredVal = new LoadInst(AI, "", Pred->getTerminator());
CurAST->add(cast<LoadInst>(PredVal));
}
UPN->setIncomingValue(i, PredVal);
}
} else {
LoadInst *L = new LoadInst(AI, "", U);
U->replaceUsesOfWith(&I, L);
CurAST->add(L);
}
}
// Thirdly, insert a copy of the instruction in each exit block of the loop
// that is dominated by the instruction, storing the result into the memory
// location. Be careful not to insert the instruction into any particular
// basic block more than once.
std::set<BasicBlock*> InsertedBlocks;
BasicBlock *InstOrigBB = I.getParent();
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
BasicBlock *ExitBlock = ExitBlocks[i];
if (isExitBlockDominatedByBlockInLoop(ExitBlock, InstOrigBB)) {
// If we haven't already processed this exit block, do so now.
if (InsertedBlocks.insert(ExitBlock).second) {
// Insert the code after the last PHI node...
BasicBlock::iterator InsertPt = ExitBlock->getFirstNonPHI();
// If this is the first exit block processed, just move the original
// instruction, otherwise clone the original instruction and insert
// the copy.
Instruction *New;
if (InsertedBlocks.size() == 1) {
I.removeFromParent();
ExitBlock->getInstList().insert(InsertPt, &I);
New = &I;
} else {
New = I.clone();
CurAST->copyValue(&I, New);
if (!I.getName().empty())
New->setName(I.getName()+".le");
ExitBlock->getInstList().insert(InsertPt, New);
}
// Now that we have inserted the instruction, store it into the alloca
if (AI) new StoreInst(New, AI, InsertPt);
}
}
}
// If the instruction doesn't dominate any exit blocks, it must be dead.
if (InsertedBlocks.empty()) {
CurAST->deleteValue(&I);
I.eraseFromParent();
}
// Finally, promote the fine value to SSA form.
if (AI) {
std::vector<AllocaInst*> Allocas;
Allocas.push_back(AI);
PromoteMemToReg(Allocas, *DT, *DF, AI->getContext(), CurAST);
}
}
}
/// hoist - When an instruction is found to only use loop invariant operands
/// that is safe to hoist, this instruction is called to do the dirty work.
///
void LICM::hoist(Instruction &I) {
DEBUG(errs() << "LICM hoisting to " << Preheader->getName() << ": " << I);
// Remove the instruction from its current basic block... but don't delete the
// instruction.
I.removeFromParent();
// Insert the new node in Preheader, before the terminator.
Preheader->getInstList().insert(Preheader->getTerminator(), &I);
if (isa<LoadInst>(I)) ++NumMovedLoads;
else if (isa<CallInst>(I)) ++NumMovedCalls;
++NumHoisted;
Changed = true;
}
/// isSafeToExecuteUnconditionally - Only sink or hoist an instruction if it is
/// not a trapping instruction or if it is a trapping instruction and is
/// guaranteed to execute.
///
bool LICM::isSafeToExecuteUnconditionally(Instruction &Inst) {
// If it is not a trapping instruction, it is always safe to hoist.
if (Inst.isSafeToSpeculativelyExecute())
return true;
// Otherwise we have to check to make sure that the instruction dominates all
// of the exit blocks. If it doesn't, then there is a path out of the loop
// which does not execute this instruction, so we can't hoist it.
// If the instruction is in the header block for the loop (which is very
// common), it is always guaranteed to dominate the exit blocks. Since this
// is a common case, and can save some work, check it now.
if (Inst.getParent() == CurLoop->getHeader())
return true;
// Get the exit blocks for the current loop.
SmallVector<BasicBlock*, 8> ExitBlocks;
CurLoop->getExitBlocks(ExitBlocks);
// For each exit block, get the DT node and walk up the DT until the
// instruction's basic block is found or we exit the loop.
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i)
if (!isExitBlockDominatedByBlockInLoop(ExitBlocks[i], Inst.getParent()))
return false;
return true;
}
/// PromoteValuesInLoop - Try to promote memory values to scalars by sinking
/// stores out of the loop and moving loads to before the loop. We do this by
/// looping over the stores in the loop, looking for stores to Must pointers
/// which are loop invariant. We promote these memory locations to use allocas
/// instead. These allocas can easily be raised to register values by the
/// PromoteMem2Reg functionality.
///
void LICM::PromoteValuesInLoop() {
// PromotedValues - List of values that are promoted out of the loop. Each
// value has an alloca instruction for it, and a canonical version of the
// pointer.
std::vector<std::pair<AllocaInst*, Value*> > PromotedValues;
std::map<Value*, AllocaInst*> ValueToAllocaMap; // Map of ptr to alloca
FindPromotableValuesInLoop(PromotedValues, ValueToAllocaMap);
if (ValueToAllocaMap.empty()) return; // If there are values to promote.
Changed = true;
NumPromoted += PromotedValues.size();
std::vector<Value*> PointerValueNumbers;
// Emit a copy from the value into the alloca'd value in the loop preheader
TerminatorInst *LoopPredInst = Preheader->getTerminator();
for (unsigned i = 0, e = PromotedValues.size(); i != e; ++i) {
Value *Ptr = PromotedValues[i].second;
// If we are promoting a pointer value, update alias information for the
// inserted load.
Value *LoadValue = 0;
if (isa<PointerType>(cast<PointerType>(Ptr->getType())->getElementType())) {
// Locate a load or store through the pointer, and assign the same value
// to LI as we are loading or storing. Since we know that the value is
// stored in this loop, this will always succeed.
for (Value::use_iterator UI = Ptr->use_begin(), E = Ptr->use_end();
UI != E; ++UI)
if (LoadInst *LI = dyn_cast<LoadInst>(*UI)) {
LoadValue = LI;
break;
} else if (StoreInst *SI = dyn_cast<StoreInst>(*UI)) {
if (SI->getOperand(1) == Ptr) {
LoadValue = SI->getOperand(0);
break;
}
}
assert(LoadValue && "No store through the pointer found!");
PointerValueNumbers.push_back(LoadValue); // Remember this for later.
}
// Load from the memory we are promoting.
LoadInst *LI = new LoadInst(Ptr, Ptr->getName()+".promoted", LoopPredInst);
if (LoadValue) CurAST->copyValue(LoadValue, LI);
// Store into the temporary alloca.
new StoreInst(LI, PromotedValues[i].first, LoopPredInst);
}
// Scan the basic blocks in the loop, replacing uses of our pointers with
// uses of the allocas in question.
//
for (Loop::block_iterator I = CurLoop->block_begin(),
E = CurLoop->block_end(); I != E; ++I) {
BasicBlock *BB = *I;
// Rewrite all loads and stores in the block of the pointer...
for (BasicBlock::iterator II = BB->begin(), E = BB->end(); II != E; ++II) {
if (LoadInst *L = dyn_cast<LoadInst>(II)) {
std::map<Value*, AllocaInst*>::iterator
I = ValueToAllocaMap.find(L->getOperand(0));
if (I != ValueToAllocaMap.end())
L->setOperand(0, I->second); // Rewrite load instruction...
} else if (StoreInst *S = dyn_cast<StoreInst>(II)) {
std::map<Value*, AllocaInst*>::iterator
I = ValueToAllocaMap.find(S->getOperand(1));
if (I != ValueToAllocaMap.end())
S->setOperand(1, I->second); // Rewrite store instruction...
}
}
}
// Now that the body of the loop uses the allocas instead of the original
// memory locations, insert code to copy the alloca value back into the
// original memory location on all exits from the loop. Note that we only
// want to insert one copy of the code in each exit block, though the loop may
// exit to the same block more than once.
//
SmallPtrSet<BasicBlock*, 16> ProcessedBlocks;
SmallVector<BasicBlock*, 8> ExitBlocks;
CurLoop->getExitBlocks(ExitBlocks);
for (unsigned i = 0, e = ExitBlocks.size(); i != e; ++i) {
if (!ProcessedBlocks.insert(ExitBlocks[i]))
continue;
// Copy all of the allocas into their memory locations.
BasicBlock::iterator BI = ExitBlocks[i]->getFirstNonPHI();
Instruction *InsertPos = BI;
unsigned PVN = 0;
for (unsigned i = 0, e = PromotedValues.size(); i != e; ++i) {
// Load from the alloca.
LoadInst *LI = new LoadInst(PromotedValues[i].first, "", InsertPos);
// If this is a pointer type, update alias info appropriately.
if (isa<PointerType>(LI->getType()))
CurAST->copyValue(PointerValueNumbers[PVN++], LI);
// Store into the memory we promoted.
new StoreInst(LI, PromotedValues[i].second, InsertPos);
}
}
// Now that we have done the deed, use the mem2reg functionality to promote
// all of the new allocas we just created into real SSA registers.
//
std::vector<AllocaInst*> PromotedAllocas;
PromotedAllocas.reserve(PromotedValues.size());
for (unsigned i = 0, e = PromotedValues.size(); i != e; ++i)
PromotedAllocas.push_back(PromotedValues[i].first);
PromoteMemToReg(PromotedAllocas, *DT, *DF, Preheader->getContext(), CurAST);
}
/// FindPromotableValuesInLoop - Check the current loop for stores to definite
/// pointers, which are not loaded and stored through may aliases and are safe
/// for promotion. If these are found, create an alloca for the value, add it
/// to the PromotedValues list, and keep track of the mapping from value to
/// alloca.
void LICM::FindPromotableValuesInLoop(
std::vector<std::pair<AllocaInst*, Value*> > &PromotedValues,
std::map<Value*, AllocaInst*> &ValueToAllocaMap) {
Instruction *FnStart = CurLoop->getHeader()->getParent()->begin()->begin();
// Loop over all of the alias sets in the tracker object.
for (AliasSetTracker::iterator I = CurAST->begin(), E = CurAST->end();
I != E; ++I) {
AliasSet &AS = *I;
// We can promote this alias set if it has a store, if it is a "Must" alias
// set, if the pointer is loop invariant, and if we are not eliminating any
// volatile loads or stores.
if (AS.isForwardingAliasSet() || !AS.isMod() || !AS.isMustAlias() ||
AS.isVolatile() || !CurLoop->isLoopInvariant(AS.begin()->getValue()))
continue;
assert(!AS.empty() &&
"Must alias set should have at least one pointer element in it!");
Value *V = AS.begin()->getValue();
// Check that all of the pointers in the alias set have the same type. We
// cannot (yet) promote a memory location that is loaded and stored in
// different sizes.
{
bool PointerOk = true;
for (AliasSet::iterator I = AS.begin(), E = AS.end(); I != E; ++I)
if (V->getType() != I->getValue()->getType()) {
PointerOk = false;
break;
}
if (!PointerOk)
continue;
}
// It isn't safe to promote a load/store from the loop if the load/store is
// conditional. For example, turning:
//
// for () { if (c) *P += 1; }
//
// into:
//
// tmp = *P; for () { if (c) tmp +=1; } *P = tmp;
//
// is not safe, because *P may only be valid to access if 'c' is true.
//
// It is safe to promote P if all uses are direct load/stores and if at
// least one is guaranteed to be executed.
bool GuaranteedToExecute = false;
bool InvalidInst = false;
for (Value::use_iterator UI = V->use_begin(), UE = V->use_end();
UI != UE; ++UI) {
// Ignore instructions not in this loop.
Instruction *Use = dyn_cast<Instruction>(*UI);
if (!Use || !CurLoop->contains(Use->getParent()))
continue;
if (!isa<LoadInst>(Use) && !isa<StoreInst>(Use)) {
InvalidInst = true;
break;
}
if (!GuaranteedToExecute)
GuaranteedToExecute = isSafeToExecuteUnconditionally(*Use);
}
// If there is an non-load/store instruction in the loop, we can't promote
// it. If there isn't a guaranteed-to-execute instruction, we can't
// promote.
if (InvalidInst || !GuaranteedToExecute)
continue;
const Type *Ty = cast<PointerType>(V->getType())->getElementType();
AllocaInst *AI = new AllocaInst(Ty, 0, V->getName()+".tmp", FnStart);
PromotedValues.push_back(std::make_pair(AI, V));
// Update the AST and alias analysis.
CurAST->copyValue(V, AI);
for (AliasSet::iterator I = AS.begin(), E = AS.end(); I != E; ++I)
ValueToAllocaMap.insert(std::make_pair(I->getValue(), AI));
DEBUG(errs() << "LICM: Promoting value: " << *V << "\n");
}
}
/// cloneBasicBlockAnalysis - Simple Analysis hook. Clone alias set info.
void LICM::cloneBasicBlockAnalysis(BasicBlock *From, BasicBlock *To, Loop *L) {
AliasSetTracker *AST = LoopToAliasMap[L];
if (!AST)
return;
AST->copyValue(From, To);
}
/// deleteAnalysisValue - Simple Analysis hook. Delete value V from alias
/// set.
void LICM::deleteAnalysisValue(Value *V, Loop *L) {
AliasSetTracker *AST = LoopToAliasMap[L];
if (!AST)
return;
AST->deleteValue(V);
}