llvm-6502/Makefile.config.in
Reid Spencer 151f8ba364 New Makefile Features:
* "dist" target now builds tar.gz, tar.bz2, and zip files suitable for
  distribution. "dist" can only be run from $(BUILD_OBJ_ROOT) and implies
  a "check".

* made the preconditions not do a recursive make and ensured that they are
  executed sequentially.

* made the messages output by the makefile be prefixed with "llvm" and the
  make level (e.g. llvm[1]: ) in the same way that make does so that the
  messages are uniform and more readable.

* Fixed the tags target so that tags depends on TAGS which contains the
  rules to build a file named TAGS

* Implemented the EXTRA_DIST feature in a few directories to make sure it
  works.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17210 91177308-0d34-0410-b5e6-96231b3b80d8
2004-10-25 08:27:37 +00:00

183 lines
5.2 KiB
Makefile

#===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
#
# The LLVM Compiler Infrastructure
#
# This file was developed by the LLVM research group and is distributed under
# the University of Illinois Open Source License. See LICENSE.TXT for details.
#
#===------------------------------------------------------------------------===#
#
# This file is included by Makefile.common. It defines paths and other
# values specific to a particular installation of LLVM.
#
#===------------------------------------------------------------------------===#
# Target operating system for which LLVM will be compiled.
OS=@OS@
# Target hardware architecture
ARCH=@ARCH@
# Endian-ness of the target
ENDIAN=@ENDIAN@
# Path to the C++ compiler to use. This is an optional setting, which defaults
# to whatever your gmake defaults to.
CXX = @CXX@
# Path to the CC binary, which use used by testcases for native builds.
CC := @CC@
# Path to the Python interpreter
PYTHON := @PYTHON@
# Linker flags.
LDFLAGS+=@LDFLAGS@
# Libraries needed by tools
TOOLLINKOPTS=@LIBS@
# Path to the library archiver program.
AR_PATH = @AR@
# The pathnames of the programs we require to build
YACC = @YACC@
BISON = @BISON@
FLEX = @LEX@
TAR = @TAR@
INSTALL = @INSTALL@
DOT = @DOT@
ETAGS = @ETAGS@
ETAGSFLAGS = @ETAGSFLAGS@
# Paths to miscellaneous programs we assume are present
RPWD = pwd
SED = sed
RM = rm
ECHO = echo "llvm["$(MAKELEVEL)"]:"
MKDIR = @abs_top_srcdir@/autoconf/mkinstalldirs
INSTALL_SH = $(BUILD_SRC_ROOT)/autoconf/install-sh
DATE = date
MV = mv
GZIP = gzip
ZIP = zip
BZIP2 = bzip2
# Determine the target for which LLVM should generate code.
LLVMGCCARCH := @target@/3.4-llvm
# Full pathnames of LLVM C/C++ front-end 'cc1' and 'cc1plus' binaries:
LCC1 = @LLVMCC1@
LCC1XX = @LLVMCC1PLUS@
# Path to directory where object files should be stored during a build.
# Set OBJ_ROOT to "." if you do not want to use a separate place for
# object files.
OBJ_ROOT := .
# Path to location for LLVM C/C++ front-end. You can modify this if you
# want to override the value set by configure.
LLVMGCCDIR := @LLVMGCCDIR@
# These are options that can either be enabled here, or can be enabled on the
# make command line (ie, make ENABLE_PROFILING=1):
# When ENABLE_OPTIMIZED is enabled, Release builds of all of the LLVM code are
# turned on, and Debug builds are turned off.
#ENABLE_OPTIMIZED = 1
@ENABLE_OPTIMIZED@
# When ENABLE_PROFILING is enabled, the llvm source base is built with profile
# information to allow gprof to be used to get execution frequencies.
#ENABLE_PROFILING = 1
# This option tells the Makefiles to produce verbose output.
# It essentially prints the commands that make is executing
#VERBOSE = 1
# Enable JIT for this platform
@JIT@
# Shared library extension for this platform.
SHLIBEXT = @SHLIBEXT@
# Executable file extension for this platform.
EXEEXT = @EXEEXT@
###########################################################################
# Directory Configuration
# This section of the Makefile determines what is where. To be
# specific, there are several locations that need to be defined:
#
# o LLVM_SRC_ROOT : The root directory of the LLVM source code.
# o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
#
# o BUILD_SRC_DIR : The directory containing the code to build.
# o BUILD_SRC_ROOT : The root directory of the code to build.
#
# o BUILD_OBJ_DIR : The directory in which compiled code will be placed.
# o BUILD_OBJ_ROOT : The root directory in which compiled code is placed.
#
###########################################################################
# Set the object build directory. By default, it is the current directory.
ifndef BUILD_OBJ_DIR
BUILD_OBJ_DIR := $(subst //,/,$(shell $(RPWD)))
endif
# Set the root of the object directory.
ifndef BUILD_OBJ_ROOT
BUILD_OBJ_ROOT := $(subst //,/,$(shell cd $(BUILD_OBJ_DIR)/$(LEVEL); $(RPWD)))
endif
# Set the source build directory. That is almost always the current directory.
ifndef BUILD_SRC_DIR
BUILD_SRC_DIR := $(subst //,/,@abs_top_srcdir@/$(patsubst $(BUILD_OBJ_ROOT)%,%,$(BUILD_OBJ_DIR)))
endif
# Set the source root directory.
ifndef BUILD_SRC_ROOT
BUILD_SRC_ROOT := $(subst //,/,@abs_top_srcdir@)
endif
# Set the LLVM object directory.
ifndef LLVM_OBJ_ROOT
ifdef LLVM_SRC_ROOT
LLVM_OBJ_ROOT := $(shell cd $(LLVM_SRC_ROOT); $(RPWD))
else
LLVM_OBJ_ROOT := $(BUILD_OBJ_ROOT)
endif
endif
# Set the LLVM source directory.
# It is typically the root directory of what we're compiling now.
ifndef LLVM_SRC_ROOT
LLVM_SRC_ROOT := $(BUILD_SRC_ROOT)
endif
# Handle configured libraries
HAVE_BZIP2 := @HAVE_BZIP2@
HAVE_ZLIB := @HAVE_ZLIB@
# Installation directories, as provided by the configure script.
exec_prefix = @exec_prefix@
prefix = @prefix@
program_transform_name = @program_transform_name@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
bytecode_libdir = $(LLVMGCCDIR)/bytecode-libs
includedir = @includedir@
infodir = @infodir@
mandir = @mandir@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_DATA = @INSTALL_DATA@
LLVM_TARBALL_NAME = @PACKAGE_NAME@-@PACKAGE_VERSION@