llvm-6502/test/CodeGen/SystemZ/frame-13.ll
Stephen Lin 8b2b8a1835 Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally.
This update was done with the following bash script:

  find test/CodeGen -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
      done
      sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
      sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
      sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
      sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 06:24:09 +00:00

300 lines
10 KiB
LLVM

; Test the handling of base + 12-bit displacement addresses for large frames,
; in cases where no 20-bit form exists.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck -check-prefix=CHECK-NOFP %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -disable-fp-elim | FileCheck -check-prefix=CHECK-FP %s
; This file tests what happens when a displacement is converted from
; being relative to the start of a frame object to being relative to
; the frame itself. In some cases the test is only possible if two
; objects are allocated.
;
; Rather than rely on a particular order for those objects, the tests
; instead allocate two objects of the same size and apply the test to
; both of them. For consistency, all tests follow this model, even if
; one object would actually be enough.
; First check the highest in-range offset after conversion, which is 4092
; for word-addressing instructions like MVHI.
;
; The last in-range doubleword offset is 4088. Since the frame has two
; emergency spill slots at 160(%r15), the amount that we need to allocate
; in order to put another object at offset 4088 is (4088 - 176) / 4 = 978
; words.
define void @f1() {
; CHECK-NOFP-LABEL: f1:
; CHECK-NOFP: mvhi 4092(%r15), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f1:
; CHECK-FP: mvhi 4092(%r11), 42
; CHECK-FP: br %r14
%region1 = alloca [978 x i32], align 8
%region2 = alloca [978 x i32], align 8
%ptr1 = getelementptr inbounds [978 x i32]* %region1, i64 0, i64 1
%ptr2 = getelementptr inbounds [978 x i32]* %region2, i64 0, i64 1
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Test the first out-of-range offset. We cannot use an index register here.
define void @f2() {
; CHECK-NOFP-LABEL: f2:
; CHECK-NOFP: lay %r1, 4096(%r15)
; CHECK-NOFP: mvhi 0(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f2:
; CHECK-FP: lay %r1, 4096(%r11)
; CHECK-FP: mvhi 0(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [978 x i32], align 8
%region2 = alloca [978 x i32], align 8
%ptr1 = getelementptr inbounds [978 x i32]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [978 x i32]* %region2, i64 0, i64 2
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Test the next offset after that.
define void @f3() {
; CHECK-NOFP-LABEL: f3:
; CHECK-NOFP: lay %r1, 4096(%r15)
; CHECK-NOFP: mvhi 4(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f3:
; CHECK-FP: lay %r1, 4096(%r11)
; CHECK-FP: mvhi 4(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [978 x i32], align 8
%region2 = alloca [978 x i32], align 8
%ptr1 = getelementptr inbounds [978 x i32]* %region1, i64 0, i64 3
%ptr2 = getelementptr inbounds [978 x i32]* %region2, i64 0, i64 3
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Add 4096 bytes (1024 words) to the size of each object and repeat.
define void @f4() {
; CHECK-NOFP-LABEL: f4:
; CHECK-NOFP: lay %r1, 4096(%r15)
; CHECK-NOFP: mvhi 4092(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f4:
; CHECK-FP: lay %r1, 4096(%r11)
; CHECK-FP: mvhi 4092(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2002 x i32], align 8
%region2 = alloca [2002 x i32], align 8
%ptr1 = getelementptr inbounds [2002 x i32]* %region1, i64 0, i64 1
%ptr2 = getelementptr inbounds [2002 x i32]* %region2, i64 0, i64 1
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; ...as above.
define void @f5() {
; CHECK-NOFP-LABEL: f5:
; CHECK-NOFP: lay %r1, 8192(%r15)
; CHECK-NOFP: mvhi 0(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f5:
; CHECK-FP: lay %r1, 8192(%r11)
; CHECK-FP: mvhi 0(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2002 x i32], align 8
%region2 = alloca [2002 x i32], align 8
%ptr1 = getelementptr inbounds [2002 x i32]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [2002 x i32]* %region2, i64 0, i64 2
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; ...as above.
define void @f6() {
; CHECK-NOFP-LABEL: f6:
; CHECK-NOFP: lay %r1, 8192(%r15)
; CHECK-NOFP: mvhi 4(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f6:
; CHECK-FP: lay %r1, 8192(%r11)
; CHECK-FP: mvhi 4(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2002 x i32], align 8
%region2 = alloca [2002 x i32], align 8
%ptr1 = getelementptr inbounds [2002 x i32]* %region1, i64 0, i64 3
%ptr2 = getelementptr inbounds [2002 x i32]* %region2, i64 0, i64 3
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Now try an offset of 4092 from the start of the object, with the object
; being at offset 8192. This time we need objects of (8192 - 176) / 4 = 2004
; words.
define void @f7() {
; CHECK-NOFP-LABEL: f7:
; CHECK-NOFP: lay %r1, 8192(%r15)
; CHECK-NOFP: mvhi 4092(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f7:
; CHECK-FP: lay %r1, 8192(%r11)
; CHECK-FP: mvhi 4092(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2004 x i32], align 8
%region2 = alloca [2004 x i32], align 8
%ptr1 = getelementptr inbounds [2004 x i32]* %region1, i64 0, i64 1023
%ptr2 = getelementptr inbounds [2004 x i32]* %region2, i64 0, i64 1023
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Keep the object-relative offset the same but bump the size of the
; objects by one doubleword.
define void @f8() {
; CHECK-NOFP-LABEL: f8:
; CHECK-NOFP: lay %r1, 12288(%r15)
; CHECK-NOFP: mvhi 4(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f8:
; CHECK-FP: lay %r1, 12288(%r11)
; CHECK-FP: mvhi 4(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2006 x i32], align 8
%region2 = alloca [2006 x i32], align 8
%ptr1 = getelementptr inbounds [2006 x i32]* %region1, i64 0, i64 1023
%ptr2 = getelementptr inbounds [2006 x i32]* %region2, i64 0, i64 1023
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Check a case where the original displacement is out of range. The backend
; should force an LAY from the outset. We don't yet do any kind of anchor
; optimization, so there should be no offset on the MVHI itself.
define void @f9() {
; CHECK-NOFP-LABEL: f9:
; CHECK-NOFP: lay %r1, 12296(%r15)
; CHECK-NOFP: mvhi 0(%r1), 42
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f9:
; CHECK-FP: lay %r1, 12296(%r11)
; CHECK-FP: mvhi 0(%r1), 42
; CHECK-FP: br %r14
%region1 = alloca [2006 x i32], align 8
%region2 = alloca [2006 x i32], align 8
%ptr1 = getelementptr inbounds [2006 x i32]* %region1, i64 0, i64 1024
%ptr2 = getelementptr inbounds [2006 x i32]* %region2, i64 0, i64 1024
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
ret void
}
; Repeat f2 in a case that needs the emergency spill slots (because all
; call-clobbered registers are live and no call-saved ones have been
; allocated).
define void @f10(i32 *%vptr) {
; CHECK-NOFP-LABEL: f10:
; CHECK-NOFP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r15)
; CHECK-NOFP: lay [[REGISTER]], 4096(%r15)
; CHECK-NOFP: mvhi 0([[REGISTER]]), 42
; CHECK-NOFP: lg [[REGISTER]], [[OFFSET]](%r15)
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f10:
; CHECK-FP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r11)
; CHECK-FP: lay [[REGISTER]], 4096(%r11)
; CHECK-FP: mvhi 0([[REGISTER]]), 42
; CHECK-FP: lg [[REGISTER]], [[OFFSET]](%r11)
; CHECK-FP: br %r14
%i0 = load volatile i32 *%vptr
%i1 = load volatile i32 *%vptr
%i3 = load volatile i32 *%vptr
%i4 = load volatile i32 *%vptr
%i5 = load volatile i32 *%vptr
%region1 = alloca [978 x i32], align 8
%region2 = alloca [978 x i32], align 8
%ptr1 = getelementptr inbounds [978 x i32]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [978 x i32]* %region2, i64 0, i64 2
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
store volatile i32 %i0, i32 *%vptr
store volatile i32 %i1, i32 *%vptr
store volatile i32 %i3, i32 *%vptr
store volatile i32 %i4, i32 *%vptr
store volatile i32 %i5, i32 *%vptr
ret void
}
; And again with maximum register pressure. The only spill slots that the
; NOFP case needs are the emergency ones, so the offsets are the same as for f2.
; However, the FP case uses %r11 as the frame pointer and must therefore
; spill a second register. This leads to an extra displacement of 8.
define void @f11(i32 *%vptr) {
; CHECK-NOFP-LABEL: f11:
; CHECK-NOFP: stmg %r6, %r15,
; CHECK-NOFP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r15)
; CHECK-NOFP: lay [[REGISTER]], 4096(%r15)
; CHECK-NOFP: mvhi 0([[REGISTER]]), 42
; CHECK-NOFP: lg [[REGISTER]], [[OFFSET]](%r15)
; CHECK-NOFP: lmg %r6, %r15,
; CHECK-NOFP: br %r14
;
; CHECK-FP-LABEL: f11:
; CHECK-FP: stmg %r6, %r15,
; CHECK-FP: stg [[REGISTER:%r[1-9][0-4]?]], [[OFFSET:160|168]](%r11)
; CHECK-FP: lay [[REGISTER]], 4096(%r11)
; CHECK-FP: mvhi 8([[REGISTER]]), 42
; CHECK-FP: lg [[REGISTER]], [[OFFSET]](%r11)
; CHECK-FP: lmg %r6, %r15,
; CHECK-FP: br %r14
%i0 = load volatile i32 *%vptr
%i1 = load volatile i32 *%vptr
%i3 = load volatile i32 *%vptr
%i4 = load volatile i32 *%vptr
%i5 = load volatile i32 *%vptr
%i6 = load volatile i32 *%vptr
%i7 = load volatile i32 *%vptr
%i8 = load volatile i32 *%vptr
%i9 = load volatile i32 *%vptr
%i10 = load volatile i32 *%vptr
%i11 = load volatile i32 *%vptr
%i12 = load volatile i32 *%vptr
%i13 = load volatile i32 *%vptr
%i14 = load volatile i32 *%vptr
%region1 = alloca [978 x i32], align 8
%region2 = alloca [978 x i32], align 8
%ptr1 = getelementptr inbounds [978 x i32]* %region1, i64 0, i64 2
%ptr2 = getelementptr inbounds [978 x i32]* %region2, i64 0, i64 2
store volatile i32 42, i32 *%ptr1
store volatile i32 42, i32 *%ptr2
store volatile i32 %i0, i32 *%vptr
store volatile i32 %i1, i32 *%vptr
store volatile i32 %i3, i32 *%vptr
store volatile i32 %i4, i32 *%vptr
store volatile i32 %i5, i32 *%vptr
store volatile i32 %i6, i32 *%vptr
store volatile i32 %i7, i32 *%vptr
store volatile i32 %i8, i32 *%vptr
store volatile i32 %i9, i32 *%vptr
store volatile i32 %i10, i32 *%vptr
store volatile i32 %i11, i32 *%vptr
store volatile i32 %i12, i32 *%vptr
store volatile i32 %i13, i32 *%vptr
store volatile i32 %i14, i32 *%vptr
ret void
}