llvm-6502/test/Transforms/GVN/pre-load.ll
Stephen Lin 39f4e8d9cc Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change.
This update was done with the following bash script:

  find test/Transforms -name "*.ll" | \
  while read NAME; do
    echo "$NAME"
    if ! grep -q "^; *RUN: *llc" $NAME; then
      TEMP=`mktemp -t temp`
      cp $NAME $TEMP
      sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
      while read FUNC; do
        sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
      done
      mv $TEMP $NAME
    fi
  done


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-14 01:42:54 +00:00

392 lines
9.5 KiB
LLVM

; RUN: opt < %s -basicaa -gvn -enable-load-pre -S | FileCheck %s
target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64"
define i32 @test1(i32* %p, i1 %C) {
; CHECK-LABEL: @test1(
block1:
br i1 %C, label %block2, label %block3
block2:
br label %block4
; CHECK: block2:
; CHECK-NEXT: load i32* %p
block3:
store i32 0, i32* %p
br label %block4
block4:
%PRE = load i32* %p
ret i32 %PRE
; CHECK: block4:
; CHECK-NEXT: phi i32
; CHECK-NEXT: ret i32
}
; This is a simple phi translation case.
define i32 @test2(i32* %p, i32* %q, i1 %C) {
; CHECK-LABEL: @test2(
block1:
br i1 %C, label %block2, label %block3
block2:
br label %block4
; CHECK: block2:
; CHECK-NEXT: load i32* %q
block3:
store i32 0, i32* %p
br label %block4
block4:
%P2 = phi i32* [%p, %block3], [%q, %block2]
%PRE = load i32* %P2
ret i32 %PRE
; CHECK: block4:
; CHECK-NEXT: phi i32 [
; CHECK-NOT: load
; CHECK: ret i32
}
; This is a PRE case that requires phi translation through a GEP.
define i32 @test3(i32* %p, i32* %q, i32** %Hack, i1 %C) {
; CHECK-LABEL: @test3(
block1:
%B = getelementptr i32* %q, i32 1
store i32* %B, i32** %Hack
br i1 %C, label %block2, label %block3
block2:
br label %block4
; CHECK: block2:
; CHECK-NEXT: load i32* %B
block3:
%A = getelementptr i32* %p, i32 1
store i32 0, i32* %A
br label %block4
block4:
%P2 = phi i32* [%p, %block3], [%q, %block2]
%P3 = getelementptr i32* %P2, i32 1
%PRE = load i32* %P3
ret i32 %PRE
; CHECK: block4:
; CHECK-NEXT: phi i32 [
; CHECK-NOT: load
; CHECK: ret i32
}
;; Here the loaded address is available, but the computation is in 'block3'
;; which does not dominate 'block2'.
define i32 @test4(i32* %p, i32* %q, i32** %Hack, i1 %C) {
; CHECK-LABEL: @test4(
block1:
br i1 %C, label %block2, label %block3
block2:
br label %block4
; CHECK: block2:
; CHECK: load i32*
; CHECK: br label %block4
block3:
%B = getelementptr i32* %q, i32 1
store i32* %B, i32** %Hack
%A = getelementptr i32* %p, i32 1
store i32 0, i32* %A
br label %block4
block4:
%P2 = phi i32* [%p, %block3], [%q, %block2]
%P3 = getelementptr i32* %P2, i32 1
%PRE = load i32* %P3
ret i32 %PRE
; CHECK: block4:
; CHECK-NEXT: phi i32 [
; CHECK-NOT: load
; CHECK: ret i32
}
;void test5(int N, double *G) {
; int j;
; for (j = 0; j < N - 1; j++)
; G[j] = G[j] + G[j+1];
;}
define void @test5(i32 %N, double* nocapture %G) nounwind ssp {
; CHECK-LABEL: @test5(
entry:
%0 = add i32 %N, -1
%1 = icmp sgt i32 %0, 0
br i1 %1, label %bb.nph, label %return
bb.nph:
%tmp = zext i32 %0 to i64
br label %bb
; CHECK: bb.nph:
; CHECK: load double*
; CHECK: br label %bb
bb:
%indvar = phi i64 [ 0, %bb.nph ], [ %tmp6, %bb ]
%tmp6 = add i64 %indvar, 1
%scevgep = getelementptr double* %G, i64 %tmp6
%scevgep7 = getelementptr double* %G, i64 %indvar
%2 = load double* %scevgep7, align 8
%3 = load double* %scevgep, align 8
%4 = fadd double %2, %3
store double %4, double* %scevgep7, align 8
%exitcond = icmp eq i64 %tmp6, %tmp
br i1 %exitcond, label %return, label %bb
; Should only be one load in the loop.
; CHECK: bb:
; CHECK: load double*
; CHECK-NOT: load double*
; CHECK: br i1 %exitcond
return:
ret void
}
;void test6(int N, double *G) {
; int j;
; for (j = 0; j < N - 1; j++)
; G[j+1] = G[j] + G[j+1];
;}
define void @test6(i32 %N, double* nocapture %G) nounwind ssp {
; CHECK-LABEL: @test6(
entry:
%0 = add i32 %N, -1
%1 = icmp sgt i32 %0, 0
br i1 %1, label %bb.nph, label %return
bb.nph:
%tmp = zext i32 %0 to i64
br label %bb
; CHECK: bb.nph:
; CHECK: load double*
; CHECK: br label %bb
bb:
%indvar = phi i64 [ 0, %bb.nph ], [ %tmp6, %bb ]
%tmp6 = add i64 %indvar, 1
%scevgep = getelementptr double* %G, i64 %tmp6
%scevgep7 = getelementptr double* %G, i64 %indvar
%2 = load double* %scevgep7, align 8
%3 = load double* %scevgep, align 8
%4 = fadd double %2, %3
store double %4, double* %scevgep, align 8
%exitcond = icmp eq i64 %tmp6, %tmp
br i1 %exitcond, label %return, label %bb
; Should only be one load in the loop.
; CHECK: bb:
; CHECK: load double*
; CHECK-NOT: load double*
; CHECK: br i1 %exitcond
return:
ret void
}
;void test7(int N, double* G) {
; long j;
; G[1] = 1;
; for (j = 1; j < N - 1; j++)
; G[j+1] = G[j] + G[j+1];
;}
; This requires phi translation of the adds.
define void @test7(i32 %N, double* nocapture %G) nounwind ssp {
entry:
%0 = getelementptr inbounds double* %G, i64 1
store double 1.000000e+00, double* %0, align 8
%1 = add i32 %N, -1
%2 = icmp sgt i32 %1, 1
br i1 %2, label %bb.nph, label %return
bb.nph:
%tmp = sext i32 %1 to i64
%tmp7 = add i64 %tmp, -1
br label %bb
bb:
%indvar = phi i64 [ 0, %bb.nph ], [ %tmp9, %bb ]
%tmp8 = add i64 %indvar, 2
%scevgep = getelementptr double* %G, i64 %tmp8
%tmp9 = add i64 %indvar, 1
%scevgep10 = getelementptr double* %G, i64 %tmp9
%3 = load double* %scevgep10, align 8
%4 = load double* %scevgep, align 8
%5 = fadd double %3, %4
store double %5, double* %scevgep, align 8
%exitcond = icmp eq i64 %tmp9, %tmp7
br i1 %exitcond, label %return, label %bb
; Should only be one load in the loop.
; CHECK: bb:
; CHECK: load double*
; CHECK-NOT: load double*
; CHECK: br i1 %exitcond
return:
ret void
}
;; Here the loaded address isn't available in 'block2' at all, requiring a new
;; GEP to be inserted into it.
define i32 @test8(i32* %p, i32* %q, i32** %Hack, i1 %C) {
; CHECK-LABEL: @test8(
block1:
br i1 %C, label %block2, label %block3
block2:
br label %block4
; CHECK: block2:
; CHECK: load i32*
; CHECK: br label %block4
block3:
%A = getelementptr i32* %p, i32 1
store i32 0, i32* %A
br label %block4
block4:
%P2 = phi i32* [%p, %block3], [%q, %block2]
%P3 = getelementptr i32* %P2, i32 1
%PRE = load i32* %P3
ret i32 %PRE
; CHECK: block4:
; CHECK-NEXT: phi i32 [
; CHECK-NOT: load
; CHECK: ret i32
}
;void test9(int N, double* G) {
; long j;
; for (j = 1; j < N - 1; j++)
; G[j+1] = G[j] + G[j+1];
;}
; This requires phi translation of the adds.
define void @test9(i32 %N, double* nocapture %G) nounwind ssp {
entry:
add i32 0, 0
%1 = add i32 %N, -1
%2 = icmp sgt i32 %1, 1
br i1 %2, label %bb.nph, label %return
bb.nph:
%tmp = sext i32 %1 to i64
%tmp7 = add i64 %tmp, -1
br label %bb
; CHECK: bb.nph:
; CHECK: load double*
; CHECK: br label %bb
bb:
%indvar = phi i64 [ 0, %bb.nph ], [ %tmp9, %bb ]
%tmp8 = add i64 %indvar, 2
%scevgep = getelementptr double* %G, i64 %tmp8
%tmp9 = add i64 %indvar, 1
%scevgep10 = getelementptr double* %G, i64 %tmp9
%3 = load double* %scevgep10, align 8
%4 = load double* %scevgep, align 8
%5 = fadd double %3, %4
store double %5, double* %scevgep, align 8
%exitcond = icmp eq i64 %tmp9, %tmp7
br i1 %exitcond, label %return, label %bb
; Should only be one load in the loop.
; CHECK: bb:
; CHECK: load double*
; CHECK-NOT: load double*
; CHECK: br i1 %exitcond
return:
ret void
}
;void test10(int N, double* G) {
; long j;
; for (j = 1; j < N - 1; j++)
; G[j] = G[j] + G[j+1] + G[j-1];
;}
; PR5501
define void @test10(i32 %N, double* nocapture %G) nounwind ssp {
entry:
%0 = add i32 %N, -1
%1 = icmp sgt i32 %0, 1
br i1 %1, label %bb.nph, label %return
bb.nph:
%tmp = sext i32 %0 to i64
%tmp8 = add i64 %tmp, -1
br label %bb
; CHECK: bb.nph:
; CHECK: load double*
; CHECK: load double*
; CHECK: br label %bb
bb:
%indvar = phi i64 [ 0, %bb.nph ], [ %tmp11, %bb ]
%scevgep = getelementptr double* %G, i64 %indvar
%tmp9 = add i64 %indvar, 2
%scevgep10 = getelementptr double* %G, i64 %tmp9
%tmp11 = add i64 %indvar, 1
%scevgep12 = getelementptr double* %G, i64 %tmp11
%2 = load double* %scevgep12, align 8
%3 = load double* %scevgep10, align 8
%4 = fadd double %2, %3
%5 = load double* %scevgep, align 8
%6 = fadd double %4, %5
store double %6, double* %scevgep12, align 8
%exitcond = icmp eq i64 %tmp11, %tmp8
br i1 %exitcond, label %return, label %bb
; Should only be one load in the loop.
; CHECK: bb:
; CHECK: load double*
; CHECK-NOT: load double*
; CHECK: br i1 %exitcond
return:
ret void
}
; Test critical edge splitting.
define i32 @test11(i32* %p, i1 %C, i32 %N) {
; CHECK-LABEL: @test11(
block1:
br i1 %C, label %block2, label %block3
block2:
%cond = icmp sgt i32 %N, 1
br i1 %cond, label %block4, label %block5
; CHECK: load i32* %p
; CHECK-NEXT: br label %block4
block3:
store i32 0, i32* %p
br label %block4
block4:
%PRE = load i32* %p
br label %block5
block5:
%ret = phi i32 [ 0, %block2 ], [ %PRE, %block4 ]
ret i32 %ret
; CHECK: block4:
; CHECK-NEXT: phi i32
}