lzsa/asm/z80/unlzsa1_fast.asm

;
;  Speed-optimized LZSA1 decompressor by spke & uniabis (111 bytes)
;
;  ver.00 by spke for LZSA 0.5.4 (03-24/04/2019, 134 bytes);
;  ver.01 by spke for LZSA 0.5.6 (25/04/2019, 110(-24) bytes, +0.2% speed);
;  ver.02 by spke for LZSA 1.0.5 (24/07/2019, added support for backward decompression);
;  ver.03 by uniabis (30/07/2019, 109(-1) bytes, +3.5% speed);
;  ver.04 by spke (31/07/2019, small re-organization of macros);
;  ver.05 by uniabis (22/08/2019, 107(-2) bytes, same speed);
;  ver.06 by spke for LZSA 1.0.7 (27/08/2019, 111(+4) bytes, +2.1% speed);
;  ver.07 by spke for LZSA 1.1.0 (25/09/2019, added full revision history);
;  ver.08 by spke for LZSA 1.1.2 (22/10/2019, re-organized macros and added an option for unrolled copying of long matches)
;
;  The data must be compressed using the command line compressor by Emmanuel Marty
;  The compression is done as follows:
;
;  lzsa.exe -f1 -r <sourcefile> <outfile>
;
;  where option -r asks for the generation of raw (frame-less) data.
;
;  The decompression is done in the standard way:
;
;  ld hl,FirstByteOfCompressedData
;  ld de,FirstByteOfMemoryForDecompressedData
;  call DecompressLZSA1
;
;  Backward compression is also supported; you can compress files backward using:
;
;  lzsa.exe -f1 -r -b <sourcefile> <outfile>
;
;  and decompress the resulting files using:
;
;  ld hl,LastByteOfCompressedData
;  ld de,LastByteOfMemoryForDecompressedData
;  call DecompressLZSA1
;
;  (do not forget to uncomment the BACKWARD_DECOMPRESS option in the decompressor).
;
;  Of course, LZSA compression algorithms are (c) 2019 Emmanuel Marty,
;  see https://github.com/emmanuel-marty/lzsa for more information
;
;  Drop me an email if you have any comments/ideas/suggestions: zxintrospec@gmail.com
;
;  This software is provided 'as-is', without any express or implied
;  warranty.  In no event will the authors be held liable for any damages
;  arising from the use of this software.
;
;  Permission is granted to anyone to use this software for any purpose,
;  including commercial applications, and to alter it and redistribute it
;  freely, subject to the following restrictions:
;
;  1. The origin of this software must not be misrepresented; you must not
;     claim that you wrote the original software. If you use this software
;     in a product, an acknowledgment in the product documentation would be
;     appreciated but is not required.
;  2. Altered source versions must be plainly marked as such, and must not be
;     misrepresented as being the original software.
;  3. This notice may not be removed or altered from any source distribution.

;	DEFINE	UNROLL_LONG_MATCHES						; uncomment for faster decompression of very compressible data (+57 bytes)
;	DEFINE	BACKWARD_DECOMPRESS

	IFNDEF	BACKWARD_DECOMPRESS

		MACRO NEXT_HL
		inc hl
		ENDM

		MACRO ADD_OFFSET
		ex de,hl : add hl,de
		ENDM

		MACRO COPY1
		ldi
		ENDM

		MACRO COPYBC
		ldir
		ENDM

	ELSE

		MACRO NEXT_HL
		dec hl
		ENDM

		MACRO ADD_OFFSET
		ex de,hl : ld a,e : sub l : ld l,a
		ld a,d : sbc h : ld h,a						; 4*4+3*4 = 28t / 7 bytes
		ENDM

		MACRO COPY1
		ldd
		ENDM

		MACRO COPYBC
		lddr
		ENDM

	ENDIF

@DecompressLZSA1:
		ld b,0 : jr ReadToken

NoLiterals:	xor (hl)
		push de : NEXT_HL : ld e,(hl) : jp m,LongOffset

 		; short matches have length 0+3..14+3
ShortOffset:	ld d,#FF : add 3 : cp 15+3 : jr nc,LongerMatch

		; placed here this saves a JP per iteration
CopyMatch:	ld c,a
.UseC		NEXT_HL : ex (sp),hl						; BC = len, DE = offset, HL = dest, SP ->[dest,src]
		ADD_OFFSET							; BC = len, DE = dest, HL = dest-offset, SP->[src]
		COPY1 : COPY1 : COPYBC						; BC = 0, DE = dest
.popSrc		pop hl								; HL = src
	
ReadToken:	; first a byte token "O|LLL|MMMM" is read from the stream,
		; where LLL is the number of literals and MMMM is
		; a length of the match that follows after the literals
		ld a,(hl) : and #70 : jr z,NoLiterals

		cp #70 : jr z,MoreLiterals					; LLL=7 means 7+ literals...
		rrca : rrca : rrca : rrca					; LLL<7 means 0..6 literals...

		ld c,a : ld a,(hl)
		NEXT_HL : COPYBC

		; next we read the first byte of the offset
		push de : ld e,(hl)
		; the top bit of token is set if the offset contains two bytes
		and #8F : jp p,ShortOffset

LongOffset:	; read second byte of the offset
		NEXT_HL : ld d,(hl)
		add -128+3 : cp 15+3 : jp c,CopyMatch

	IFNDEF	UNROLL_LONG_MATCHES

		; MMMM=15 indicates a multi-byte number of literals
LongerMatch:	NEXT_HL : add (hl) : jr nc,CopyMatch

		; the codes are designed to overflow;
		; the overflow value 1 means read 1 extra byte
		; and overflow value 0 means read 2 extra bytes
.code1		ld b,a : NEXT_HL : ld c,(hl) : jr nz,CopyMatch.UseC
.code0		NEXT_HL : ld b,(hl)

		; the two-byte match length equal to zero
		; designates the end-of-data marker
		ld a,b : or c : jr nz,CopyMatch.UseC
		pop de : ret

	ELSE

		; MMMM=15 indicates a multi-byte number of literals
LongerMatch:	NEXT_HL : add (hl) : jr c,VeryLongMatch

		ld c,a
.UseC		NEXT_HL : ex (sp),hl
		ADD_OFFSET
		COPY1 : COPY1

		; this is an unrolled equivalent of LDIR
		xor a : sub c
		and 16-1 : add a
		ld (.jrOffset),a : jr nz,$+2
.jrOffset	EQU $-1
.fastLDIR	DUP 16
		COPY1
		EDUP
		jp pe,.fastLDIR
		jp CopyMatch.popSrc

VeryLongMatch:	; the codes are designed to overflow;
		; the overflow value 1 means read 1 extra byte
		; and overflow value 0 means read 2 extra bytes
.code1		ld b,a : NEXT_HL : ld c,(hl) : jr nz,LongerMatch.UseC
.code0		NEXT_HL : ld b,(hl)

		; the two-byte match length equal to zero
		; designates the end-of-data marker
		ld a,b : or c : jr nz,LongerMatch.UseC
		pop de : ret

	ENDIF

MoreLiterals:	; there are three possible situations here
		xor (hl) : exa
		ld a,7 : NEXT_HL : add (hl) : jr c,ManyLiterals

CopyLiterals:	ld c,a
.UseC		NEXT_HL : COPYBC

		push de : ld e,(hl)
		exa : jp p,ShortOffset : jr LongOffset

ManyLiterals:
.code1		ld b,a : NEXT_HL : ld c,(hl) : jr nz,CopyLiterals.UseC
.code0		NEXT_HL : ld b,(hl) : jr CopyLiterals.UseC