xasm/xasm.1.asciidoc

XASM (1)
========
:doctype: manpage

NAME
----
xasm - 6502 cross-assembler

SYNOPSIS
--------
*xasm* '[OPTIONS] SOURCE_FILE'

DESCRIPTION
-----------
*xasm* is a cross-assembler for the 6502 family processors.

'SOURCE_FILE' is the name of the source file
(you may omit the default `.asx` extension).
When invoked without any options, *xasm* assembles 'SOURCE_FILE'
and writes the result to an object file named 'SOURCE_FILE'
with the extension changed to `.obx`.

OPTIONS
-------

*/c*::
Specifies that lines skipped due to a false condition
should be included in the listing file.

[[new_deflabel]]*/d:*'LABEL'='VALUE'::
Defines a label.
'LABEL' should be a valid label name.
'VALUE' may be any expression (may reference to labels defined in source files).
You may use several */d* options to define many labels from the command line.

*/i*::
Excludes included files from the listing file.

*/l*'[:LISTING_FILE]'::
Generates listing file.
If 'LISTING_FILE' is omitted, the listing filename
is 'SOURCE_FILE' with the extension changed to `.lst`.

[[new_makefile]]*/M*::
Prints a rule for use in a `Makefile`.
First line of the rule lists 'OBJECT_FILE' as the target of the rule
and all source files (including the ones specified with `icl` and `ins` directives)
as dependencies. The second line contains the command line with `OBJECT_FILE`
replaced by the *make* macro `$@` and `SOURCE_FILE` replaced by the macro `$<`.
Dollars in the command line are doubled.
Your `make` or shell may require further escaping.

*/o*':OBJECT_FILE'::
Sets output file name.
The default is 'SOURCE_FILE' with the extension changed to `.obx`.

[[new_fullpaths]]*/p*::
Prints absolute paths in listing and error messages.

[[new_quiet]]*/q*::
Quiet mode. Prevents *xasm* from printing its banner and compilation summary.

*/t*'[:LABEL_FILE]'::
Generates label table.
If 'LABEL_FILE' is omitted then the table is appended at the end of the listing.

[[new_unlabels]]*/u*::
Issues a warning message for each label whose value is unused.

Alternatively, you may use Unix-style options, for example:

-----------------------------------------------------------
xasm -i -d DEBUG=1 -l listing.lst source.asx
-----------------------------------------------------------

SYNTAX
------

Source files should be plain ASCII files.
LF, CR, CR/LF and Atari ($9b) line terminators are supported.
Labels and instructions are case-insensitive.

*xasm* is backward compatible with Quick Assembler.
To compile QA sources with *xasm*, simply replace ATASCII-specific characters
with their integer codes. You also have to update all `OPT` directives,
but usually you can simply remove them.

'Label' is a symbol that represents a signed 32-bit integer.
You define a label by putting its name at the beginning of a line
(with no spaces before).
The label will be assigned the current value of the 'origin counter'
(i.e. the address of the compiled instruction),
unless you use it with the `EQU` directive where it is assigned
the value of the `EQU` argument.

Instructions and directives must be preceded with some whitespace.
Without leading whitespace they are treated as label names.
For example:
----
 nop
----
is a 6502 instruction, whereas
----
nop
----
(without leading space) defines a label called `nop`.

Whole-line comments must start with a semicolon, an asterisk or a pipe,
with optional label definition and spaces before.
Here are examples of whole-line comments:
--------------------
; this is a comment
 * so it is
label | and this too
--------------------

[[new_linerep]]
Lines with instructions (and selected directives) may be 'repeated'.
To assemble a single line several times,
precede the repeat count with a colon, for example:
-----------------
:4 asl @
mask_lookup :32 dta $80,$40,$20,$10,8,4,2,1
-----------------

In lines with instructions or directives, a comment starts immediately
after the instruction/directive has been successfully parsed.
That is, in such lines *xasm* does not require a special character
to start a comment.
-------------------------------------------------------------
 lda foo ; this is a comment
 sta bar this too
 tax #0  tax has no operand, therefore #0 starts this comment
-------------------------------------------------------------

[[new_pairing]]
You may put two instructions in one line so they share their operand.
For example:
------------
 eor:sta foo
------------
is equivalent to
------------
 eor foo
 sta foo
------------

Note that
------------
 lda:tax #0
------------
is allowed because `#0` is treated as a comment for `tax`.

EXPRESSIONS
-----------
Expressions are numbers combined with operators and brackets.
You should use square brackets, because parentheses are reserved
for 6502 indirect addressing.

A number is:

- a 32-bit decimal integer, e.g. `-12345`
- a 32-bit hexadecimal integer, e.g. `$abcd`
- a 32-bit binary integer, e.g. `%10100101`
- an ASCII character, e.g. `'a'` or `"a"`
- origin counter: `*`
- a hardware register (see below), e.g. `^4e`
- [[new_opcode]]an opcode (see below), e.g. `{lda #0}` is `$a9`
- [[new_linecnt]]the line repeat counter (see below): `#`

Abbreviations of Atari hardware registers are provided
to save two characters (`$d40e` vs `^4e`)
and to facilitate porting software between Atari 8-bit computers
and the Atari 5200 console.
These are very similar machines, one of the biggest differences
is the location of hardware registers.

[cols="^m,^d,^m,^d",options="header"]
|================================================
|Syntax|Chip |Value|Value in Atari 5200 mode (`opt g+`)
|  ^0x |GTIA |$D00x|`$C00x`
|  ^1x |GTIA |$D01x|`$C01x`
|  ^2x |POKEY|$D20x|`$E80x`
|  ^3x |PIA  |$D30x|'error (there's no PIA chip)'
|  ^4x |ANTIC|$D40x|`$D40x`
|================================================

The opcode syntax represents the opcode byte of the instruction inside braces.
The operand of the instruction is discarded and is needed only to recognize
the addressing mode. The instruction should begin right after the left brace
and the right brace should immediately follow the operand 'or' the instruction.
[[new_op_op]]You can skip the operand if the addressing mode is fixed.
Examples: `{lda #}`, `{jsr}`, `{bne}`, `{jmp ()}`, `{sta a:,x}`.

You can use the line repeat counter (`#`) in the repeated lines.
It counts the iterations starting from zero. Examples:
----------------------------------------------------
:3 dta # ; generates three bytes: 0, 1, 2.
line_lo :192 dta l(screen+40*#)
line_hi :192 dta h(screen+40*#)
dl :59 dta $4f,a(screen+40*#),0,$4f,a(screen+40*#),0
----------------------------------------------------

The following 'binary operators' are supported:

- `+` Addition
- `-` Subtraction
- `*` Multiplication
- `/` Division
- `%` Remainder
- `&` Bitwise AND
- `|` Bitwise OR
- `^` Bitwise XOR
- `<<` Arithmetic shift left
- `>>` Arithmetic shift right
- `==` Equal
- `=` Equal (same as `==`)
- `!=` Not equal
- `<>` Not equal (same as `!=`)
- `<` Less than
- `>` Greater than
- `<=` Less or equal
- `>=` Greater or equal
- `&&` Logical AND
- `||` Logical OR

[[new_unary]]
The following 'unary operators' are supported:

- `+` Plus (no operation)
- `-` Minus (changes the sign)
- `~` Bitwise NOT (complements all bits)
- `!` Logical NOT (changes true to false and vice versa)
- `<` Low (extracts the low byte)
- `>` High (extracts the high byte)

The operator precedence is following:

- first: `[]` (brackets)
- `+ - ~ < >` (unary)
- `* / % & << >>` (binary)
- `+ - | ^` (binary)
- `= == <> != < > <= >=` (binary)
- `!` (unary)
- `&&` (binary)
- last: `||` (binary)

NOTE: Although the operators are similar to those used in C, C++ and Java,
their priorities are different.

Compare and logical operators assume that zero is false and a non-zero
is true. They return 1 for true.

Expressions are calculated in signed 32-bit arithmetic.
"Arithmetic overflow" error signals overflow of the 32-bit range.

DIRECTIVES
----------

*EQU* - assign value of expression to label::

Examples:
+
----------
five equ 5
here equ *
----------

[[new_opt]]*OPT* - set assembler options::

Six options are available:

- `F` - fill the space between memory areas with `$FF`
- `G` - Atari 5200 mode for hardware register abbreviations
- `H` - generate Atari executable headers
- `L` - write to the listing
- `O` - write to the object file
- `U` - warn of unused labels

+
You can turn any of these on or off.
The default (if no `OPT` specified) is `opt f-g-h+l+o+u+`.
Examples:
+
------------------------------------------------------------------------------
 opt l-     listing off
 opt l+o-   listing on, object file off
 opt f+g+h- useful for Atari 5200 cartridges - raw output, 5200 hw regs
------------------------------------------------------------------------------

*ORG* - change value of the origin counter::

If Atari executable headers are enabled, you can include an operand prefix:

- `a:` starts a new block even if it's superfluous
  because the new address equals the current address.
- `f:` is same as `a:`, but additionally generates a double-`$FF` prefix
  before the new header. This prefix is automatically generated
  at the beginning of the file (no need to include `f:` in the first `ORG`).

+
Examples:
+
---------------
 org $600
 org f:$700
table org *+100
---------------
+
In the latter example `table` points to 100 bytes
of uninitialized data (label is assigned with `*`
before the `ORG` directive is executed).
+
[[new_orgr]]Starting with version 2.6.0, *xasm* supports code
that is relocated at run time. Let's say you want your code
to be located on page zero. You can't normally load it directly into this
place, so you load it at a different address and then move in your program.
`org r:` changes the address that it used for code generation
but not the address used for generating Atari executable headers.
Example:
+
--------------------------------------
 org $8000
 ldx #code_length-1
 mva:rpl code_loaded,x z:code_zpage,x-
 jmp code_zpage

code_loaded
 org r:$30
code_zpage
 jmp * ; ... or something more sensible
code_length equ *-code_zpage
--------------------------------------
+
Note that both `*` and label definitions use the counter used
for code generation. There is no direct access to the other counter.
You can only calculate it:
+
---------------------------------------
where_am_i equ *-code_zpage+code_loaded
---------------------------------------

[[new_dta]]*DTA* - define data::

- integers
+
--
* bytes: `b(200)` or simply `200`
* words: `a(10000)`
* low bytes of words: `l(511)` (byte 255)
* high bytes of words: `h(511)` (byte 1)

You may enter many expressions in parentheses and combine different types
of data in single line, separating things with commas.

You may also build a sine lookup table. The syntax is:
-------------------------------
sin(center,amp,period,first,last)
-------------------------------
where:

* `center` is an integer which is added to every sine value
* `amp` is the sine amplitude
* `period` is the number of values per sine period
* `first,last` define the range of sine arguments.
  They are optional. The default are `0,period-1`.

Example:
----------------------------
 dta a(sin(0,1000,256,0,63))
----------------------------
defines a table of 64 words representing a quarter of sine with the amplitude of 1000.
--

- real numbers: `r(-1.23456e12)`
+
Real numbers are stored in the 6-byte Atari Floating-Point format.

- text strings
+
--
* ASCII strings: `c'Text'` or `c"Text"`
* ANTIC strings: `d'Text'` or `d"Text"`

A character string consists of any number of characters surrounded by quotation
marks. You can include the quotation marks in the string by doubling them.
Placing a `*` character after a string inverts
the highest bit in every byte of the string.
--
+
Examples of `DTA`:
+
------------------------------------------------
 dta b(1,2),3,a(1000,-1),l(12345,sin(0,127,256))
 dta d"ANTIC"*,c'It''s a string',$9b
------------------------------------------------

*ICL* - include another source file::

Specifies another file to be included in the assembly as if the contents
of the referenced file appeared in place of the `ICL` statement.
The included file may contain other `ICL` statements.
The `.asx` extension is added if none given.
Examples:
+
-----------------
 icl 'macros.asx'
 icl 'lib/fileio'
-----------------
+
NOTE: for portability, use only relative paths and slash as the separator.
This way your sources will compile under Windows and Linux.

*END* - end assembling file::

May be used if the source file ends with something which shouldn't
be read by *xasm* (e.g. your notes).

*INS* - insert contents of file::

Copies every byte of the specified file into the object file and updates
the origin counter, as if these bytes were written using `DTA`.
You may specify a range of the file to insert. The syntax is:
+
-----------------------------
 ins 'file'[,offset[,length]]
-----------------------------
+
The first byte in a file has the offset of zero.
If the offset is negative, it counts from the end of the file.
Examples:
+
-----------------------------------------------
 ins 'picture.raw'
 ins 'file',-256  insert last 256 bytes of file
 ins 'file',10,10 insert bytes 10..19 of file
-----------------------------------------------

*RUN* - set run address in the Atari executable format::

+
---------
 run main
---------
+
is equivalent to:
+
------------
 org $2e0
 dta a(main)
------------

*INI* - set init address in the Atari executable format::

Example:
+
------------
 ini showloadingpic
------------

*ERT* - generate error if expression evaluates to true::

Examples:
+
-----------------------
 ert *>$c000
 ert len1>$ff||len2>$ff
-----------------------

[[new_eli]]*IFT* - assemble if expression is true::
*ELI* - else if::
*ELS* - else::
*EIF* - end if::

With these directives you can construct fragments which
are assembled only when a condition is met.
Conditional constructions can be nested.
Example:
+
-------------
noscr equ 1
widescr equ 1
 ift noscr
 lda #0
 eli widescr
 lda #$23
 els
 lda #$22
 eif
 sta $22f
-------------
+
NOTE: The above example may be rewritten using the 'repeat line' feature:
+
--------------------------
noscr equ 1
widescr equ 1
:noscr lda #0
:!noscr&&widescr lda #$23
:!noscr&&!widescr lda #$22
 sta $22f
--------------------------

PSEUDO COMMANDS
---------------
'Pseudo commands' are built-in macros. There are no user-defined macros in *xasm*.

*ADD* - add without carry::

If you have ever programmed a 6502, you must have noticed that you had
to use a `CLC` before `ADC` for every simple addition.
+
*xasm* can do it for you. `ADD` replaces two instructions: `CLC` and `ADC`.

*SUB* - subtract::

It is `SEC` and `SBC`.

[[new_repskip]]*RCC, RCS, REQ, RMI, RNE, RPL, RVC, RVS* - conditional repeat::

These are branches to the previous instruction.
They take no operand, because the branch target is the address
of the previously assembled instruction or pseudo command.
Example:
+
-----------------------
 ldx #0
 mva:rne $500,x $600,x+
-----------------------
+
The above code copies a 256-byte memory block from $500 to $600.
Here is the same written with standard 6502 commands only:
+
--------------------
 ldx #0
copy_loop lda $500,x
 sta $600,x
 inx
 bne copy_loop
--------------------

*SCC, SCS, SEQ, SMI, SNE, SPL, SVC, SVS* - conditional skip::

These are branches over the next instruction. No operand is required,
because the target is the address of the instruction following
the next instruction.
Example:
+
--------------
 lda #40
 add:sta ptr
 scc:inc ptr+1
--------------
+
In the above example the 16-bit variable `ptr` is incremented by 40.

*JCC, JCS, JEQ, JMI, JNE, JPL, JVC, JVS* - conditional jump::

These are long branches. While standard branches (such as `BNE`)
have range of -128..+127, these jumps have range of 64 kB.
For example:
+
---------
 jne dest
---------
+
is equivalent to:
+
-------------
 seq:jmp dest
-------------

*INW* - increment word::

Increments a 16-bit word in the memory.
Example:
+
---------
 inw dest
---------
+
is equivalent to:
+
---------------
 inc dest
 sne:inc dest+1
---------------

*MVA, MVX, MVY* - move byte using accumulator, X or Y::

Each of these pseudo commands requires two operands
and substitutes two commands:
+
----------------------------------------
 mva source dest = lda source : sta dest
 mvx source dest = ldx source : stx dest
 mvy source dest = ldy source : sty dest
----------------------------------------

[[new_mwinde]]*MWA, MWX, MWY* - move word using accumulator, X or Y::

These pseudo commands require two operands and are combinations of two `MVA`/`MVX`/`MWY`:
one to move the low byte, and the other to move the high byte.
You can't use indirect nor pseudo addressing mode with `MWA`/`MWX`/`MWY`.
Destination must be an absolute or zeropage address, optionally indexed.
When source is also an absolute or zeropage address, an `mwa source dest` expands to:
+
--------------------
 mva source  dest
 mva source+1 dest+1
--------------------
+
When source is an immediate value, an `mwa #immed dest` expands to:
+
------------------
 mva <immed dest
 mva >immed dest+1
------------------
+
When `<immed` equals `>immed` and `immed` is not forward-referenced,
*xasm* skips the second `LDA`, generating the following code:
+
----------------
 mva <immed dest
 sta dest+1
----------------
+
If possible, `MWX` and `MWY` use increment/decrement commands.
For example, `mwx #1 dest` expands to:
+
-----------
 ldx #1
 stx dest
 dex
 stx dest+1
-----------

ADDRESSING MODES
----------------

All addressing modes are entered in the standard 6502 convention
except for the accumulator addressing mode,
which should be marked with the `@` character (as in Quick Assembler).

For Quick Assembler compatibility, there are two extra immediate
addressing modes: `<` and `>`, which use the low/high byte of a 16-bit word constant.
Unlike in Quick Assembler, you can alternatively use
the more common syntax: `#<` and `#>`.
Note the difference:
-------------------------------
 lda >$ff+5   ; loads 1 (>$104)
 lda #>$ff+5  ; loads 5 (0+5)
-------------------------------

You can explicitly specify absolute (`a:`) and zero-page (`z:`) addressing modes.

Examples:
--------------------------------------
 nop
 asl @
 lda >$1234  assembles to lda #$12
 lda $100,x
 lda 0       zero-page (8-bit address)
 lda a:0     absolute (16-bit address)
 jmp ($0a)
 lda ($80),y
--------------------------------------

[[new_adrmodes]]
There are 'pseudo addressing modes', which are similar to pseudo commands.
You may use them just like standard addressing modes in all 6502 commands
and pseudo commands, except for `MWA`, `MWX` and `MWY`:
------------------------------------------
 cmd a,x+   =  cmd a,x   : inx
 cmd a,x-   =  cmd a,x   : dex
 cmd a,y+   =  cmd a,y   : iny
 cmd a,y-   =  cmd a,y   : dey
 cmd (z),y+ =  cmd (z),y : iny
 cmd (z),y- =  cmd (z),y : dey
 cmd (z,0)  =  ldx #0    : cmd (z,x)
 cmd (z),0  =  ldy #0    : cmd (z),y
 cmd (z),0+ =  ldy #0    : cmd (z),y : iny
 cmd (z),0- =  ldy #0    : cmd (z),y : dey
------------------------------------------

HISTORY
-------

Version 3.1.0 (2014-07-20)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- OS X, Ubuntu and Fedora distributions
- `INS` can be repeated (suggested by Marek Pavlik) and taken "opcode" of
- `OPT U-` disables <<new_unlabels,*/u*>> unused label warnings
  (suggested by Marek Pavlik)
- if the file to be included cannot be opened, report error in the `ICL` line
  (suggested by Peter Dell)
- removed duplicate filenames for <<new_makefile,*/M*>>
- implemented <<new_fullpaths,*/p*>> outside Windows
- source code updated from D1 to D2
- project moved to GitHub

Version 3.0.2 (2009-10-17)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- fixed "Branch out of range" error message - was overstated by 256 bytes
  for backward branches
- <<new_makefile,new command-line option */M* prints a Makefile rule>>
- command-line options are now case-insensitive
- on Windows error messages are printed in red, warnings in yellow

Version 3.0.1 (2007-04-22)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- fixed a bug in `OPT H-` mode
- made *xasm* compilable with the latest D compiler v1.010
  (there were incompatible changes in the D language and library)

Version 3.0.0 (2005-05-22)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- rewritten from the x86 assembly language to the
  http://dlang.org/[D programming language] - Linux version
  is now available and DOS is no longer supported
- no limits for line length, number of `ICLs`, `ORGs`,`IFTs` and labels
- Unix-style command-line options are supported
- */e* option is no longer supported
- the label table is now sorted alphabetically

Version 2.6.1 (2005-05-21)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- no more "Arithmetic overflow" and "Division by zero" errors for correct
  use of forward-referenced labels (bug found by Marcin Lewandowski)
- an error was reported in the following correct code:
+
---------
 ift 0
foo equ 1
 ift foo
 eif
 eif
---------
+
(bug found by Adrian Matoga)

- errors for non-existing `INC @` and `DEC @`
- negative numbers fixed in the listing

Version 2.6.0 (2005-02-07)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- long file names are supported under Windows
- <<new_orgr,support for code relocated at runtime>>
- <<new_linecnt,line repeat counter>>
- label values are now 32-bit, not just 17-bit
- command-line options */n* and */s* are no longer supported
- fatal I/O errors (such as floppy not ready) no longer print the annoying
  "Abort, Retry, Ignore" message

Version 2.5.2 (2002-10-03)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- version 2.5.1 broke Unix EOLs - fixed
- version 2.5.1 omitted all blank/comment/label lines, unless */c* was used

Version 2.5.1 (2002-08-21)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- fixed assembling sources with Atari EOLs
- blank/comment/label lines in false conditionals are now correctly omitted
  in listing

Version 2.5 (2002-07-08)
~~~~~~~~~~~~~~~~~~~~~~~~
- fixed another bug, very similar to the previous one, e.g.
+
----------
 ift 0
:label nop
 eif
----------
+
reported "Label not defined before" error for the repeat count

- <<new_opt,`OPT F+` causes `ORG` to fill the space
  between the old and the new location with `$FFs`>>
- <<new_opt,`OPT G+` enables Atari 5200 mode for hardware
  register abbreviations>>

Version 2.4.1 (2002-06-27)
~~~~~~~~~~~~~~~~~~~~~~~~~~
- fixed a bug related to label definitions in conditionally skipped code,
e.g.
+
----------
 ift 0
label
 eif
----------
+
reported "No ORG specified" error for the label definition

Version 2.4 (2002-05-22)
~~~~~~~~~~~~~~~~~~~~~~~~
- fixed incorrect unary operator precedence
- fixed wrong label value after a skip pseudo command
- the assembler is .EXE (.COM caused problems with DJGPP *make* due
  to a bug in the DJGPP runtime)
- the assembler executable is not compressed (so it occupies less space in the ZIP)
- improved command-line parsing: options may be used before source file name,
  tab character is a valid separator, slash may be used as a directory separator
- error and warning messages are written to stderr, not stdout
- added `==` (equals) operator, which is equivalent to `=`,
  but more natural for C/C++/Java programmers
- <<new_deflabel,added `/d:label=value` option: define a label>>
- <<new_fullpaths,added `/p` option: print full paths
  in listing and error messages>>
- <<new_quiet,added `/q` option: quiet mode>>
- <<new_unlabels,added `/u` option: warn of unused labels>>
- <<new_opt,writing to the object file may be suppressed with `OPT O-`>>
- <<new_eli,added `ELI` (else if) directive>>
- <<new_mwinde,`MWX` and `MWY` may use `INX`/`DEX` and `INY`/`DEY`,
  respectively, for generating shorter code>>

Version 2.3 (2002-02-10)
~~~~~~~~~~~~~~~~~~~~~~~~
- fixed double skip (e.g. `SCC:SNE`)
- fixed real numbers with two-digit exponent
- trailing spaces are trimmed from listing lines
- label definitions allowed in blank, comment and repeated lines
- <<new_unary,unary operators>>
- <<new_dta,`DTA` implied byte mode>>
- <<new_op_op,operand can be skipped for some opcodes>>

Version 2.2 (1999-09-10)
~~~~~~~~~~~~~~~~~~~~~~~~
- fixed invalid opcodes of absolute `CPX` and `CPY`
- fixed: addressing mode not checked for branch commands
- fixed `ICL` in last line
- fixed `OPT H-H+`
- fixed first `ORG *`
- no need to set origin counter until it's used
- allow Unix, Macintosh and Atari EOLs
- value of 'true' changed to 1
- command-line option to set environment variables on error
- commane-line option to assemble only if source is newer than object file
- <<new_opcode,opcode extracting>>
- <<new_linerep,repeat line>>
- <<new_pairing,two instructions in line>>
- <<new_repskip,conditional repeat and skip pseudo commands>>
- <<new_adrmodes,`(),0+` and `(),0-` pseudo addressing modes>>

Version 2.0 (1998-11-12)
~~~~~~~~~~~~~~~~~~~~~~~~
- fixed: name of object file was truncated
- fixed forward references in `EQU` and `DTA`
- fixed hex numbers
- `.OBX` is now the default extension for the object file
- options (command-line switches and `OPT`)
- listing
- label table
- conditional assembly
- user errors (`ERT`)
- warnings
- 6 new pseudo commands (memory-to-memory move)
- 8 pseudo addressing modes
- indirect conditional jumps
- Atari floating-point numbers
- object file headers optimization
- improved expressions - 19 operators and brackets, 32-bit arithmetic
- improved signed numbers
- improved `INS`: inserting specified part of file

Version 1.2 (1998-08-14)
~~~~~~~~~~~~~~~~~~~~~~~~
- first release

AUTHOR
------
Piotr Fusik <fox@scene.pl>

SEE ALSO
--------

Website: https://github.com/pfusik/xasm[]