fix memory config

Apple1.ino

@@ -18,7 +18,7 @@ prom b(basic, sizeof(basic));
 prom m(monitor, sizeof(monitor));
 #endif
 
-ram pages[RAM_SIZE / 1024];
+ram pages[RAM_PAGES];
 //socket_filer files("apple1");
 flash_filer files(PROGRAMS);
 io io(files);
@@ -45,16 +45,25 @@ void reset() {
 void setup() {
 #if defined(DEBUGGING) || defined(CPU_DEBUG)
 	Serial.begin(TERMINAL_SPEED);
+	Serial.println();
+	Serial.printf("RAM:    %dkB at 0x0000", RAM_PAGES);
+	Serial.println();
+#if defined(USE_SPIRAM)
+	Serial.printf("SpiRAM: %dkB at 0x%04x", SPIRAM_EXTENT * Memory::page_size / 1024, SPIRAM_BASE);
+	Serial.println();
+#endif
 #endif
 	hardware_init(cpu);
 		
-	for (unsigned i = 0; i < RAM_SIZE; i += 1024)
-		memory.put(pages[i / 1024], i);
+	for (unsigned i = 0; i < RAM_PAGES; i++)
+		memory.put(pages[i], i * ram::page_size);
 
 #if defined(USE_SPIRAM)
 	memory.put(sram, SPIRAM_BASE, SPIRAM_EXTENT);
 #endif
+
 	memory.put(io, 0xd000);
+
 #if defined(KRUSADER)
 	memory.put(k, 0xe000);
 #else

Makefile

@@ -1,21 +1,22 @@
 t ?= esp32
 
+TERMINAL_SPEED := 115200
+
 ifeq ($t, esp8266)
 BOARD := d1_mini
 UPLOAD_SPEED := 921600
-TERMINAL_SPEED := 115200
 FS_DIR := programs
 FLASH_SIZE := 4M1M
 F_CPU := 80
 CPPFLAGS = -DUSER_SETUP_LOADED -DILI9341_DRIVER -DTFT_CS=PIN_D8 -DTFT_DC=PIN_D1 \
 	-DTFT_RST=-1 -DSPI_FREQUENCY=40000000 -DLOAD_GLCD \
-	-DHARDWARE_H=\"hw/esp8266-pwm-fs.h\" -DTERMINAL_SPEED=$(TERMINAL_SPEED)
-LIBRARIES := TFT_eSPI
+	-DHARDWARE_H=\"hw/esp8266-pwm-fs-23k256.h\" -DTERMINAL_SPEED=$(TERMINAL_SPEED) -DDEBUGGING=1
+LIBRARIES := TFT_eSPI SpiRAM
 endif
 
 ifeq ($t, tivac)
 BOARD := EK-LM4F120XL
-CPPFLAGS := -DDEBUGGING -DHARDWARE_H=\"hw/lm4f-utft-sd.h\"
+CPPFLAGS := -DDEBUGGING -DHARDWARE_H=\"hw/lm4f-utft-sd.h\" -DTERMINAL_SPEED=$(TERMINAL_SPEED)
 LIBRARIES := UTFT SD SpiRAM
 endif
 
@@ -25,8 +26,8 @@ UPLOAD_SPEED := 921600
 FS_DIR := programs
 CPPFLAGS = -DDEBUGGING -DCPU_DEBUG \
 	-DUSER_SETUP_LOADED -DILI9341_DRIVER -DTFT_CS=5 -DTFT_DC=2 \
-	-DTFT_RST=-1 -DTFT_WIDTH=240 -DTFT_HEIGHT=320 \
-	-DSPI_FREQUENCY=40000000 -DLOAD_GLCD
+	-DTFT_RST=-1 -DSPI_FREQUENCY=40000000 -DLOAD_GLCD \
+	-DHARDWARE_H=\"hw/esp32-espi.h\" -DTERMINAL_SPEED=$(TERMINAL_SPEED)
 LIBRARIES = TFT_eSPI FS SPIFFS
 endif
 

README.md

@@ -1,6 +1,6 @@
 Apple-1 Emulator
 ================
-- Emulates an Apple-1 with 32k of RAM
+- Emulates an Apple-1 with up to 52k of RAM
 - See [napple1](https://github.com/nobuh/napple1),
 [krusader](http://school.anhb.uwa.edu.au/personalpages/kwessen/apple1/Krusader.htm)
 and more [software](http://www.willegal.net/appleii/apple1-software.htm)

config.h

@@ -1,12 +1,19 @@
-#ifndef _CONFIG_H
-#define _CONFIG_H
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#define RAM_TOP		0xd000u
+
+#if (RAM_SIZE >= RAM_TOP)
+#define RAM_PAGES	(RAM_TOP / ram::page_size)
+
+#elif defined(USE_SPIRAM)
+#define RAM_PAGES	(RAM_SIZE / ram::page_size)
+#define SPIRAM_BASE	RAM_SIZE
+#define SPIRAM_EXTENT	min(RAM_TOP - SPIRAM_BASE, SPIRAM_SIZE) / Memory::page_size
 
-#if defined(USE_SPIRAM)
-#define RAM_SIZE	0x3000
-#define SPIRAM_BASE	0x3000
-#define SPIRAM_EXTENT	(20 * 1024 / 256)
 #else
-#define RAM_SIZE	0x8000
+#define RAM_PAGES	(RAM_SIZE / ram::page_size)
+
 #endif
 
 #define CPU_INSTRUCTIONS	1000