Issue #29 from ea4eoz noted this, and I've confirmed myself that the latest
revision as of this commit (e395f27) has moved the jumper to a vertical
orientation with the lowest pin connected to Vcc.
Issue #29 from ea4eoz noted that this is backwards for the revision H
board. It's clearly must be backwards for _every_ revision, since
closing a jumper, rather than opening it, is the way to connect the
other side of the jumper to ground.
(This error was inserted by me when I originally wrote this section
of the documentation.)
Added a variety of additional information and fixups, to the BOM table especially:
* added some missing jumpers (JP1/J11/A13_W/A14_w)
* jumpers were unclear outside of KiCad, added "silkscreen" column with notes
* also added a "socket" column for parts if want to buy narrow/wide holder for any chips
* some jumpers incorrectly had "right angle" listed where straight header needed
* the PCBWay link was broken, updated to revH
Curt J. Sampson
Nathan Vander Wilt
Unknown