dfnr2
6edc2dc535
Update README.md
2020-04-18 00:21:56 -05:00
Dave
8db577580e
Move DIP switch number label
2020-04-18 00:20:23 -05:00
Dave
5c1f5c0297
Update README for Atmega2560 ASCII interface
2020-04-16 17:14:31 -05:00
Dave
ac0d43b97e
Add fixed PCB rendering
2020-04-16 17:13:11 -05:00
Dave
8fa9e27afa
Remove problematic image
2020-04-16 17:10:52 -05:00
Dave
9cb368be32
Clean up connector labels on ATmel-2560 ASCII interface PCB
2020-04-16 17:02:28 -05:00
Dave
f946a699a0
Add 16-pin socket for custom interface/prototyping
2020-04-16 16:56:06 -05:00
Dave
427080a666
Clarified textbox comments
2020-04-15 15:23:04 -05:00
Dave
192b626be3
More README cleanup
2020-04-14 00:53:27 -05:00
Dave
d08e65bef4
Change ATMega328P to ATMega2560 at top of README
2020-04-14 00:49:44 -05:00
Dave
35d3bfb11b
README cleanups.
2020-04-14 00:49:06 -05:00
Dave
aaf6233723
Silk screen cleanups
2020-04-14 00:29:19 -05:00
Dave
1a9c84aac1
Add Atmega2560-based ASCII interface board
2020-04-13 20:54:56 -05:00
Dave
b135998254
On aligners, moved numpad 0.1825" to the right.
2020-04-13 15:08:55 -05:00
Dave
623a04c6c4
Changed resistor value from "R_US" to 470
2020-04-13 15:08:31 -05:00
Dave
b8fae61ba8
Added footprints for 2u key with cherry aligner
...
- footprints for PCB
- footprints for aligners
2020-04-08 02:05:17 -05:00
Dave
787e49e1d9
Cleanups, use cherry aligners with futaba keys, bump rev number
2020-04-08 02:03:50 -05:00
Dave
e784abe263
Moved mounting slots from keyboard PCB to aligners
...
- This allows the PCB to sink below the mounting brackets. The aligner height can
be adjusted relative to the mounting brackets using spacers.
- changed futaba aligners to use cherry stabilizers.
- bumped rev number
2020-04-08 02:01:14 -05:00
Dave
89bfdd71a9
Move LED current limit resistors to keyboard PCB
...
For better matching of current limit resistors to LEDs, the resistors are moved
to the keyboard matrix PCB, where they can be tuned for maximum brightness (at
100% duty cycle). This allows consistent keyboard brightness when a single
interface PCB is swapped between keyboard matrices.
2020-04-05 20:00:20 -05:00
Dave
4bf0e3eb33
Add series resistors to LEDs and stabilizer to 2u shift
2020-04-05 10:08:14 -05:00
dfnr2
2870130cb5
Swapped text in futaba "main" aligner
2020-03-22 22:08:34 -05:00
David Fenyes
3cd9547d59
Added aligners for SOL keyboard
...
- options for complete aligner, and split main/numpad aligners
- adjusted aligner spacer mounting holes on PCB.
2020-03-21 12:13:07 -05:00
David Fenyes
869f7c2260
Deleted obsolete files
2020-03-21 12:10:49 -05:00
David Fenyes
0400c08f79
Rename Cherry MX footprint
2020-03-21 11:57:21 -05:00
David Fenyes
b579d70181
remove temporary files
2020-03-18 16:19:43 -05:00
David Fenyes
c91939e6e9
Add silk screen information to cherry aligner.
2020-03-18 16:16:12 -05:00
David Fenyes
91ae8d0bfa
Replace wrong cherry aligner file.
2020-03-18 16:12:05 -05:00
David Fenyes
e60c769824
Add Cherry and Futaba aligners and add text to PCB
2020-03-18 15:52:30 -05:00
David Fenyes
58126667d9
Add a header-and-mounting-holes footprint with fewer mounting holes
...
The SOL-20 keyboard doesn't have space for mounting holes right next to the
matrix header, so the new footprint eliminates those mounting holes.
2020-03-16 13:36:19 -05:00
David Fenyes
d2d0c4c673
Add 3D model to Cherry MX footprint.
2020-03-16 13:35:41 -05:00
David Fenyes
6e21b96519
SOL keyboard adjustments
...
- Fixed position offset error in first three rows of the SOL keyboard
- moved key matrix interface connector to bottom of board so the parallel output
connector can be at the top of the keyboard.
- Adjusted size of mounting slots to accommodate #6 screws.
- ongoing clean up of traces.
2020-03-16 13:27:09 -05:00
David Fenyes
63e733c18d
Moved spare LED from caps-lock to @ (OSI shift LOCK)
...
This allows the keymap to determine which LED is used, rather than requiring the
decision to be hardwired in at the time of assembly. For the OSI keyboard, the
LED could be placed on the SHIFTLOCK key, at the far right LED, or in the
CAPSLOCK position, which is just to the left of the RETURN and not otherwise
populated in the OSI layout.
2020-03-04 20:24:06 -06:00
David Fenyes
0bd2fa0330
Move DIP switch to row 8 (9th row)
2020-02-28 21:02:30 -06:00
David Fenyes
eb28b7b59f
update screen shot to 2.4
2020-02-28 03:38:46 -06:00
David Fenyes
9550331adf
PCB cleanups
...
- swap numbering of row select protection diodes for cleaner PCB labeling
- clarify labeling on GPIO pins on the MCU
- bump rev to 2.4 to indicate work in progress. Release will be 2.5.
2020-02-28 03:31:48 -06:00
David Fenyes
96a4c4f806
Fix font size for alphanumerics to 0.187" instead of 0.150"
2020-02-28 03:30:21 -06:00
David Fenyes
92816e64e8
Update README for ASCII interface
2020-02-28 03:24:48 -06:00
David Fenyes
c30deb3442
OUT3 is /RESET on Apple1 and Apple2 connectors.
...
OUT3 is RESET on both Apple 1 and Apple 2 connectors
Fix comment on the OUT1, OUT2, and OUT3 functions.
2020-02-16 12:55:53 -06:00
David Fenyes
cde8c54e6d
removed extraneous hole outside keyboard outline.
2020-02-16 12:53:08 -06:00
David Fenyes
c4b26cbe86
Update rev to 1.4
...
pcb: ajust cutout to account for 1.5u wide LEFT SHIFT
schematic: minor text format cleanup
2020-01-31 23:22:21 -06:00
David Fenyes
5ba0c228aa
Update the spacing comment to include spacing for keyboard cutout
2020-01-31 14:35:28 -06:00
David Fenyes
5a7ccc1c38
Adjustments to keyboard cutout outline on B.Fab layer.
2020-01-31 14:31:05 -06:00
David Fenyes
f5c8803586
Fixed details of keycap sets
...
- SOL-20: Specify SA profile, row 3
- classic: Specify SA profile, row 3 (incorrectly specified DSA)
- classic: add 8u spacebar. whoops.
2020-01-30 16:59:23 -06:00
David Fenyes
ef068a1ae5
fix typo
2020-01-29 09:10:48 -06:00
David Fenyes
7839af3eba
Add README.md file
2020-01-29 09:09:38 -06:00
David Fenyes
76098140ef
Moved connector to top of board
...
Reduces required extra space at bottom of board. Needed to fit in case.
2020-01-29 08:57:20 -06:00
David Fenyes
203ff558c0
Initial rev of SOL-20 keyboard PCB
2020-01-28 20:24:35 -06:00
David Fenyes
b8e08ff7c9
add SOL-20 and classic keycap details
2020-01-28 15:16:40 -06:00
David Fenyes
821ef250ca
Add SOL-20 connector
2020-01-28 15:04:01 -06:00
David Fenyes
5bd775d010
Aditional outline fix for Apple II
2020-01-28 14:57:04 -06:00
