93 lines
3.5 KiB
C
93 lines
3.5 KiB
C
// -*- mode: C; tab-width: 4 ; indent-tabs-mode: nil -*-
|
|
//
|
|
// Universal Keyboard Project
|
|
// ASDF keyboard firmware
|
|
//
|
|
// asdf_config.h
|
|
//
|
|
// This file gathers configuration parameters related to the user-detectable
|
|
// keyboard experience. For example, put key debounce times, repeat rates,
|
|
// buffer sized, baud rates, etc. here. Details such as processor clock speed,
|
|
// etc. should go in the architecture-dependent files. System details such as
|
|
// number of buffer handles, etc. should go with the appropriate module, but
|
|
// certain buffer sized may go here if they can affect the user experience (such
|
|
// as how long a macro can be).
|
|
//
|
|
// Copyright 2019 David Fenyes
|
|
// This program is free software: you can redistribute it and/or modify it under
|
|
// the terms of the GNU General Public License as published by the Free Software
|
|
// Foundation, either version 3 of the License, or (at your option) any later
|
|
// version.
|
|
//
|
|
// This program is distributed in the hope that it will be useful, but WITHOUT
|
|
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
|
|
// FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
|
|
// details.
|
|
//
|
|
// You should have received a copy of the GNU General Public License along with
|
|
// this program. If not, see <https://www.gnu.org/licenses/>.
|
|
//
|
|
|
|
#if !defined(CONFIG_H)
|
|
#define CONFIG_H
|
|
|
|
#define ASDF_POSITIVE_POLARITY 0
|
|
#define ASDF_NEGATIVE_POLARITY (~ASDF_POSITIVE_POLARITY)
|
|
|
|
// data polarity is positive (inactive is low, active is high)
|
|
#define ASDF_DEFAULT_DATA_POLARITY ASDF_POSITIVE_POLARITY
|
|
|
|
// Strobe polarity is positive (inactive is low, active is high)
|
|
#define ASDF_DEFAULT_STROBE_POLARITY ASDF_POSITIVE_POLARITY
|
|
|
|
// RESET output polarity is negative (inactive is high, active is low)
|
|
#define ASDF_DEFAULT_RESET_POLARITY ASDF_NEGATIVE_POLARITY
|
|
|
|
// SCREEN_CLEAR output polarity is positive (inactive is low, active is high)
|
|
#define ASDF_DEFAULT_SCREEN_CLEAR_POLARITY ASDF_POSITIVE_POLARITY
|
|
|
|
|
|
// Data structure sizes:
|
|
|
|
// size of the keycode output buffer.
|
|
#define ASDF_KEYCODE_BUFFER_SIZE 16
|
|
|
|
#define ASDF_MESSAGE_BUFFER_SIZE 128
|
|
|
|
#define ASDF_BUFFER_POOL_SIZE (ASDF_MESSAGE_BUFFER_SIZE + ASDF_KEYCODE_BUFFER_SIZE)
|
|
|
|
// key debounce period (in msec)
|
|
#define ASDF_DEBOUNCE_TIME_MS 10
|
|
|
|
// Autorepeat default behavior. Set to REPEAT_AUTO for default autorepeat.
|
|
// Set to REPEAT_OFF for default no autorepeat by default.
|
|
#define ASDF_DEFAULT_REPEAT_STATE REPEAT_AUTO
|
|
|
|
// time to wait before sending consecutive message characters to the host, to
|
|
// ensure that messages are intact on hosts that poll the port without
|
|
// buffering. (in msec)
|
|
#define ASDF_MESSAGE_CHARACTER_DELAY 16 //msec
|
|
|
|
// time to hold down a key in milliseconds before autorepeat starts
|
|
#define ASDF_AUTOREPEAT_TIME_MS 525 // 525 msec.
|
|
|
|
// time between repeats of a character with repeat key held, or in autorepeat (milliseconds)
|
|
#define ASDF_REPEAT_TIME_MS (1000 / 15) // l5 characters per sec.
|
|
|
|
// duration of keyboard output pulses (RESET, SCREEN CLEAR, BREAK, etc.)
|
|
#define ASDF_PULSE_DELAY_SHORT_US 10
|
|
|
|
// duration of keyboard output pulses (RESET, SCREEN CLEAR, BREAK, etc.)
|
|
#define ASDF_PULSE_DELAY_LONG_MS 50
|
|
|
|
// DEFAULT value of keyboard outputs
|
|
#define ASDF_VIRTUAL_OUT_DEFAULT_VALUE 1 // High if not used.
|
|
|
|
// DEFAULT key scan routine
|
|
#define ASDF_DEFAULT_KEY_SCANNER asdf_keyscan
|
|
|
|
#endif /* !defined (CONFIG_H) */
|
|
|
|
//-------|---------|---------+---------+---------+---------+---------+---------+
|
|
// Above line is 80 columns, and should display completely in the editor.
|