From b61b490e4baccea318c7fa7005145a50db1b4cd8 Mon Sep 17 00:00:00 2001
From: Niels Moseley <n.a.moseley@gmail.com>
Date: Sat, 27 Jan 2018 14:42:15 +0100
Subject: [PATCH] added missing DE0 top level

---
 rtl/boards/terasic_de0/apple1_de0_top.v | 54 +++++++++++++++++++++++++
 1 file changed, 54 insertions(+)
 create mode 100644 rtl/boards/terasic_de0/apple1_de0_top.v

diff --git a/rtl/boards/terasic_de0/apple1_de0_top.v b/rtl/boards/terasic_de0/apple1_de0_top.v
new file mode 100644
index 0000000..ca5cc99
--- /dev/null
+++ b/rtl/boards/terasic_de0/apple1_de0_top.v
@@ -0,0 +1,54 @@
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+// Description: Top level Apple 1 module for Terasic DE0 board
+//
+// Author.....: Niels A. Moseley
+// Date.......: 26-1-2018
+// 
+
+
+module apple1_de0_top(
+    input   CLOCK_50,       // the 50 MHz DE0 master clock
+
+    // UART I/O signals
+    output  UART_TXD,       // UART transmit pin on DE0 board
+    input   UART_RXD,       // UART receive pin on DE0 board
+    output  UART_CTS        // UART clear-to-send pin on DE0 board
+);
+
+    //////////////////////////////////////////////////////////////////////////    
+    // Registers and Wires
+    reg clk25;
+
+    // generate 25MHz clock from 50MHz master clock
+    always @(posedge CLOCK_50)
+    begin
+        clk25 <= ~clk25;
+    end
+
+    //////////////////////////////////////////////////////////////////////////    
+    // Core of system
+    top core_top(
+        .clk25(clk25),
+        .rst_n(1'b1),       // we don't have any reset pulse..
+        .uart_rx(UART_RXD),
+        .uart_tx(UART_TXD),
+        .uart_cts(UART_CTS)
+    );
+
+endmodule
\ No newline at end of file