diff --git a/tools/iverilog/run_uart_tb.sh b/tools/iverilog/run_uart_tb.sh
new file mode 100755
index 0000000..4aa452b
--- /dev/null
+++ b/tools/iverilog/run_uart_tb.sh
@@ -0,0 +1,2 @@
+iverilog -DSIM -g2005 -s uart_tb -o uart_tb -c uart_files.txt
+vvp uart_tb
diff --git a/tools/iverilog/uart_files.txt b/tools/iverilog/uart_files.txt
new file mode 100644
index 0000000..8de3f2e
--- /dev/null
+++ b/tools/iverilog/uart_files.txt
@@ -0,0 +1,3 @@
+../../rtl/uart/uart.v
+../../rtl/uart/async_tx_rx.v
+uart_tb.v
diff --git a/tools/iverilog/uart_tb.v b/tools/iverilog/uart_tb.v
new file mode 100644
index 0000000..37d8953
--- /dev/null
+++ b/tools/iverilog/uart_tb.v
@@ -0,0 +1,136 @@
+// Licensed to the Apache Software Foundation (ASF) under one
+// or more contributor license agreements.  See the NOTICE file
+// distributed with this work for additional information
+// regarding copyright ownership.  The ASF licenses this file
+// to you under the Apache License, Version 2.0 (the
+// "License"); you may not use this file except in compliance
+// with the License.  You may obtain a copy of the License at
+//
+//   http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing,
+// software distributed under the License is distributed on an
+// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+// KIND, either express or implied.  See the License for the
+// specific language governing permissions and limitations
+// under the License.
+//
+// Description: Top level test bench for apple1_top
+//
+// Author.....: Niels A. Moseley
+// Date.......: 26-1-2018
+//
+
+`timescale 1ns/1ps
+
+module uart_tb;
+
+    reg clk25, enable, rst, w_en, uart_rx;
+    reg [2:0] state;
+    reg [1:0] address;
+    reg [7:0] din;
+    wire [7:0] dout;
+    wire uart_tx, uart_cts;
+
+    //////////////////////////////////////////////////////////////////////////
+    // Setup dumping of data for inspection
+
+    initial begin
+
+        state = 3'd0;
+
+        clk25 = 1'b0;
+        rst = 1'b1;
+
+        enable = 1'b0;
+        w_en = 1'b0;
+        uart_rx = 1'b1;
+        address = 2'b11;
+        din = 8'b0;
+
+        $display("Starting...");
+        $dumpfile("uart_tb.vcd");
+        $dumpvars;
+
+        #40
+        rst = 1'b0;     // reset release
+        state = 3'd1;
+
+        #1                  // TX first byte - ignored
+        address = 2'b10;
+        din = 8'b00101010;
+        enable = 1'b1;
+        w_en = 1'b1;
+        state = 3'd3;
+
+        #2
+        w_en = 1'b0;
+        enable = 1'b0;
+        state = 3'd4;
+
+        #40                 // TX second byte
+        address = 2'b10;
+        din = 8'b00101010;
+        enable = 1'b1;
+        w_en = 1'b1;
+        state = 3'd3;
+
+        #2
+        w_en = 1'b0;
+        enable = 1'b0;
+        state = 3'd4;
+
+        #6000
+        state = 3'd5;
+
+        uart_rx = 1'b1;
+        #434 uart_rx = 1'b0; // start
+        #434 uart_rx = 1'b0; // 1
+        #434 uart_rx = 1'b1; // 2
+        #434 uart_rx = 1'b0; // 3
+        #434 uart_rx = 1'b1; // 4
+        #434 uart_rx = 1'b0; // 5
+        #434 uart_rx = 1'b1; // 6
+        #434 uart_rx = 1'b0; // 7
+        #434 uart_rx = 1'b1; // 8
+        #434 uart_rx = 1'b1; // stop bit 1
+        #434 uart_rx = 1'b1; // stop bit 2
+        state = 3'd6;
+        
+        #6000
+        address = 2'b00;
+        enable = 1'b1;
+        state = 3'd7;
+        #20
+        enable = 1'b0;
+
+        #10000 $display("Stopping...");
+        $finish;
+    end
+
+    //////////////////////////////////////////////////////////////////////////
+    // Clock
+
+    always
+        #1 clk25 = !clk25;
+
+    //////////////////////////////////////////////////////////////////////////
+    // Core of system
+    uart #(
+        .ClkFrequency(25000000),
+        .Baud(115200),
+        .Oversampling(8)
+    ) my_uart (
+        .clk(clk25),
+        .enable(1'b1),
+        .rst(rst),
+        .address(address),
+        .w_en(w_en),
+        .din(din),
+        .dout(dout),
+        .uart_rx(uart_rx),
+        .uart_tx(uart_tx),
+        .uart_cts(uart_cts)
+    );
+
+endmodule