apple1emu-SAM/apple1emu.asm

665 lines
22 KiB
NASM

; Apple 1 emulator for SAM Coupe, by Simon Owen
;
; Version 1.2 (5/9/2008)
;
; WWW: http://simonowen.com/sam/apple1emu/
base: equ &d000 ; Emulator code shares Apple 1 I/O area
status: equ &f9 ; Status and extended keyboard port
lmpr: equ &fa ; Low Memory Page Register
hmpr: equ &fb ; High Memory Page Register
vmpr: equ &fc ; Video Memory Page Register
keyboard: equ &fe ; Keyboard port
border: equ &fe ; Border port
rom0_off: equ %00100000 ; LMPR bit to disable ROM0
rom1_on: equ %01000000 ; LMPR bit to enable ROM1
vmpr_mode2: equ %00100000 ; Mode 2 select for VMPR
low_page: equ 3 ; LMPR during emulation
screen_page: equ 5 ; SAM display
file_page: equ 6 ; File import text page
m6502_nmi: equ &fffa ; nmi vector address
m6502_reset: equ &fffc ; reset vector address
m6502_int: equ &fffe ; int vector address (also for BRK)
r1onclbc: equ &01ea ; ROM 1 on, call BC
getkey: equ &1cab ; SAM ROM key reading (NZ=got key in A, A=0 for no key)
; PIA registers for keyboard and display I/O
kbd_data: equ &d010 ; keyboard data
kbd_ctrl: equ &d011 ; keyboard control
dsp_data: equ &d012 ; display data
dsp_ctrl: equ &d013 ; display control
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
org base
dump $
autoexec
di
jr start
defs kbd_data-$
; This gap contains the PIA locations from above
defs dsp_ctrl-kbd_data+1
start: ld a,low_page+rom0_off
out (lmpr),a
ld a,vmpr_mode2+screen_page
out (vmpr),a
ld (basic_stack),sp
ld sp,stack_top
call set_sam_attrs ; set the mode 2 attrs so the screen is visible
call setup_im2 ; enable IM 2
ld a,(op_00) ; lowest address used by emulator
ld (rom_write+1),a ; save byte to restore to simulate ROM
reset_loop: ld hl,0
ld (dsp_data),hl ; display ready
ld (kbd_data),hl ; no key available
ld hl,(m6502_reset) ; start from reset vector
ld (reg_pc),hl
ld a,&04 ; interrupts disabled
ld (reg_p),a
ei
call load_state
call execute ; GO!
call save_state
jr reset_loop
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Utility functions
; Fill SAM mode 2 display attributes to make the screen visible
set_sam_attrs: ld a,screen_page+rom0_off
out (lmpr),a
ld hl,&2000
ld bc,&1844 ; 24 blocks of bright green on black
clear_lp: ld (hl),c
inc l
jr nz,clear_lp
inc h
djnz clear_lp
ld a,low_page+rom0_off
out (lmpr),a
ret
; Scroll the screen up 1 row and clear the bottom line
scroll_screen: ld hl,0
ld d,h
ld e,l
inc h
ld bc,&1700
scroll_lp: FOR 32, ldi ; 32 * LDI
jp pe,scroll_lp
dec h
scroll_clr: ld (hl),0
inc l
jp nz,scroll_clr
ret
; Advance the cursor 1 character, wrapping and scrolling if necessary
advance_chr: ld hl,(cursor_xy)
cp &5f
jr z,back_chr
cp &0a
jr z,advance_line
cp &0d
jr z,advance_line
ld a,l
add a,6
ld l,a
cp &f0
jr c,no_wrap
advance_line: ld l,0
inc h
ld a,h
cp &18
jr nz,no_wrap
dec h
exx
call scroll_screen
exx
no_wrap: ld (cursor_xy),hl
ret
back_chr: ld a,l
sub 6
ld l,a
jr nc,no_wrap
ld l,39*6
ld a,h
sub 1
adc a,0
ld h,a
jr no_wrap
; Map display character from SAM to Apple 1
map_chr: sub &20
ret nc
xor a
ret
; Display character in A at current cursor position
display_chr: add a,a ; * 2
ld l,a
ld h,0
add hl,hl ; * 4
add hl,hl ; * 8
ld de,font_data
add hl,de
ld d,mask_data/256
exx
ld hl,(cursor_xy)
ld a,l
and %00000111
srl l
srl l
srl l
inc l
exx
ld e,a
exx
ld de,&0020
ld b,8
draw_lp: exx
ld c,(hl)
inc l
xor a
cp e
jr z,no_rot
ld b,e
rot_lp: srl c
rra
djnz rot_lp
no_rot: ld b,a
ld a,(de)
inc e
exx
and (hl)
inc l
exx
or c
ex af,af'
ld a,(de)
dec e
exx
and (hl)
exx
or b
exx
ld (hl),a
dec l
ex af,af'
ld (hl),a
add hl,de
djnz draw_lp
ret
; LSB=pixel position (0-240), MSB=display row (0-23)
cursor_xy: defw 0
; Map key symbols from SAM to Apple 1
map_key: cp &0c
jr z,del_key
cp &fc
jr z,tab_key
cp &80
jr nc,ignore_key
cp &61 ; 'a'
ret c
cp &7b ; 'z'+1
ret nc
and %11011111
ret
del_key: ld a,&5f ; Delete -> _
ret
tab_key: ld a,&09 ; standard tab
ret
invalid_key: ld a,&20 ; space for invalid
ret
ignore_key: xor a ; ignore
ret
; Get a type-in key from the imported file
get_filekey: ld a,file_page+rom0_off
out (lmpr),a
ld hl,(filepos)
ld a,h
or l
or (hl)
jr z,file_done ; jump if no file
file_skip: ld a,(hl) ; fetch next file character
inc hl
and a
jr z,clear_file2 ; clear file at end
cp &0d ; CR?
jr z,file_skip ; ignore CR in file
cp &0a ; LF?
jr nz,file_done
ld a,&0d ; convert LF to CR
file_done: ld (filepos),hl
and a
ret
filepos: defw 0
; Clear the file area to disable type-in
clear_file: ld a,file_page+rom0_off
out (lmpr),a
clear_file2: ld hl,0
ld c,l
clr_file_lp: ld (hl),c
inc l
jr nz,clr_file_lp
inc h
bit 7,h
jr nz,clr_file_lp
ld h,l
xor a ; no file character
jr file_done
update_io:
ld a,&f7
in a,(status)
and %00100000
jr nz,not_esc ; jump if Esc not pressed
call clear_file ; Esc cancels type-in mode
ld a,&fe
in a,(keyboard)
rra
jr c,not_reset ; unshifted gives chr
ld a,&c9 ; RET opcode
ld (main_loop),a ; return to reset on next instruction
not_reset:
still_esc: ld a,&f7
in a,(status)
and %00100000
jr z,still_esc ; wait until Esc released
ld a,&1b ; Esc character
jr got_key
not_esc:
ld a,&7f
in a,(keyboard)
bit 1,a
jr nz,not_sym
ld a,&f7
in a,(keyboard)
rra
ld c,&ff ; line interrupt disable
jr nc,got_line
rra
ld c,88 ; centre of display (312/2-68=88)
jr c,not_sym
got_line: ld a,c
out (status),a ; set or disable line interrupt
not_sym:
ld hl,kbd_ctrl
bit 7,(hl) ; key available?
jr nz,no_key ; no need to read more yet
call get_filekey ; got a type-in key from file?
jr nz,got_key ; jump if we have
skip_key: ld a,&1f ; LMPR page for BASIC, with ROM 0 enabled
out (lmpr),a
ld (save_stack),sp
ld sp,(basic_stack)
ld bc,getkey ; return key code in A, zero for none
call r1onclbc
ld sp,(save_stack)
jr z,no_key
call map_key
and a
jr z,skip_key
got_key:
ld hl,kbd_data
ld (hl),a
set 7,(hl) ; bit 7 always set
inc l
set 7,(hl) ; key available
no_key:
ld hl,dsp_data
bit 7,(hl) ; display char available?
jr z,no_char
res 7,(hl) ; display ready
ld a,(hl) ; fetch character to display
and a
jr z,done_draw
cp &7f
jr z,done_draw
push af
ld a,screen_page+rom0_off
out (lmpr),a ; page in screen
ld a,&00 ; space
call display_chr ; erase cursor
pop af
cp &5f ; backspace? (underscore)
jr z,done_draw2 ; if so, no need to process further
push af
call map_chr ; map output from SAM->Apple 1
call display_chr ; show it
pop af
done_draw2: call advance_chr ; advance the cursor position
ld a,&5f ; cursor block
call display_chr ; show cursor
done_draw:
no_char:
ret
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Interrupt handling
setup_im2: ld hl,im2_table
ld a,im2_jp/256
im2_fill: ld (hl),a
inc l
jr nz,im2_fill
inc h
ld (hl),a ; complete the final entry
ld a,im2_table/256
ld i,a
im 2 ; set interrupt mode 2
ret
im2_handler: push af
push bc
push de
push hl
ex af,af'
exx
push af
push bc
push de
push hl
push ix
push iy
in a,(lmpr)
push af
call update_io
pop af
out (lmpr),a
pop iy
pop ix
pop hl
pop de
pop bc
pop af
exx
ex af,af'
pop hl
pop de
pop bc
pop af
ei
reti
; IM 2 table must be aligned to 256-byte boundary
defs -$\256
im2_table: defs 257
; IM 2 vector must have LSB==MSB
defs $/256-1
stack_top: ; stack fits nicely in the slack space
im2_jp: jp im2_handler
basic_stack: defw 0
save_stack: defw 0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; 65C02 emulation
execute: ld a,&1a ; LD A,(DE)
ld (ix),a
jp (ix)
i_undoc_3: inc de ; 3-byte NOP
i_undoc_2: inc de ; 2-byte NOP
i_undoc_1: jp (ix) ; NOP
read_write_loop:
write_loop: ld a,h
cp op_00/256 ; MSB of lowest emulator byte
jr nc,write_trap
zwrite_loop:
main_loop: ld a,(de) ; 7/7/15 - fetch opcode
inc de ; 6/7/11 - PC++
ld l,a ; 4/6/6 - LSB is opcode
ld h,msb_table/256 ; 7/7/15 - look-up table
ld h,(hl) ; 7/8/16 - opcode MSB
jp (hl) ; 4/5/9 - execute!
; = 35T (official) / 40T (off-screen) / 72T (on-screen)
write_trap: cp &d0 ; I/O page?
jr nz,rom_write
ld a,l
cp &12 ; display char?
jr z,chr_write
jp (ix)
chr_write: set 7,(hl) ; display busy
jp (ix)
rom_write: ld a,&00 ; patched by starting code
ld (op_00),a ; emulator appears read-only to be ROM for RAM tests
jp (ix)
read_loop: ld a,h
cp &d0
jr z,read_trap
ld a,(de) ; fetch opcode
inc de ; PC++
ld l,a ; LSB is opcode
ld h,msb_table/256 ; look-up table
ld h,(hl) ; opcode MSB
jp (hl) ; execute!
read_trap: ld a,l
cp &10 ; key read?
jr z,key_read
jp (ix)
key_read: inc l
res 7,(hl) ; key not available
jp (ix)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
load_state: ld a,(reg_a)
ld b,a ; set A
ld a,(reg_x)
ld iyh,a ; set X to IYh
ld a,(reg_y)
ld iyl,a ; set Y to IYl
exx
ld a,(reg_s)
ld l,a ; set S
ld h,&01 ; MSB for stack pointer
ld a,(reg_p)
ld c,a ; keep safe
and %00001100 ; keep D and I
or %00110000 ; force T and B
ld d,a ; set P
ld a,c
and %01000000 ; keep V
ld e,a ; set V
ld a,c
rra ; carry from C
ex af,af' ; set carry
ld a,c
and %10000010 ; keep N Z
xor %00000010 ; zero for Z
exx
ld c,a ; set N Z
ld de,(reg_pc) ; set PC
ld ix,main_loop ; decode loop
ret
save_state: ld a,b ; get A
ld (reg_a),a
ld a,iyh ; get X from IYh
ld (reg_x),a
ld a,iyl ; get Y from IYl
ld (reg_y),a
ex af,af' ; carry
inc c
dec c ; set N Z
push af ; save flags
ex af,af' ; protect carry
exx
pop bc
ld a,c
and %10000001 ; keep Z80 N and C
bit 6,c ; check Z80 Z
jr z,save_nz
or %00000010 ; set Z
save_nz: or e ; merge V
or d ; merge T B D I
ld (reg_p),a
ld a,l ; get S
ld (reg_s),a
exx
ld (reg_pc),de
ret
; During running we keep the 65xx registers in Z80 registers
; These are used only to hold the state before/after running
reg_a: defb 0
reg_p: defb 0
reg_x: defb 0
reg_y: defb 0
reg_s: defb 0
reg_pc: defw 0
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
defs -$\256
msb_table: defb op_00>>8, op_01>>8, op_02>>8, op_03>>8, op_04>>8, op_05>>8, op_06>>8, op_07>>8
defb op_08>>8, op_09>>8, op_0a>>8, op_0b>>8, op_0c>>8, op_0d>>8, op_0e>>8, op_0f>>8
defb op_10>>8, op_11>>8, op_12>>8, op_13>>8, op_14>>8, op_15>>8, op_16>>8, op_17>>8
defb op_18>>8, op_19>>8, op_1a>>8, op_1b>>8, op_1c>>8, op_1d>>8, op_1e>>8, op_1f>>8
defb op_20>>8, op_21>>8, op_22>>8, op_23>>8, op_24>>8, op_25>>8, op_26>>8, op_27>>8
defb op_28>>8, op_29>>8, op_2a>>8, op_2b>>8, op_2c>>8, op_2d>>8, op_2e>>8, op_2f>>8
defb op_30>>8, op_31>>8, op_32>>8, op_33>>8, op_34>>8, op_35>>8, op_36>>8, op_37>>8
defb op_38>>8, op_39>>8, op_3a>>8, op_3b>>8, op_3c>>8, op_3d>>8, op_3e>>8, op_3f>>8
defb op_40>>8, op_41>>8, op_42>>8, op_43>>8, op_44>>8, op_45>>8, op_46>>8, op_47>>8
defb op_48>>8, op_49>>8, op_4a>>8, op_4b>>8, op_4c>>8, op_4d>>8, op_4e>>8, op_4f>>8
defb op_50>>8, op_51>>8, op_52>>8, op_53>>8, op_54>>8, op_55>>8, op_56>>8, op_57>>8
defb op_58>>8, op_59>>8, op_5a>>8, op_5b>>8, op_5c>>8, op_5d>>8, op_5e>>8, op_5f>>8
defb op_60>>8, op_61>>8, op_62>>8, op_63>>8, op_64>>8, op_65>>8, op_66>>8, op_67>>8
defb op_68>>8, op_69>>8, op_6a>>8, op_6b>>8, op_6c>>8, op_6d>>8, op_6e>>8, op_6f>>8
defb op_70>>8, op_71>>8, op_72>>8, op_73>>8, op_74>>8, op_75>>8, op_76>>8, op_77>>8
defb op_78>>8, op_79>>8, op_7a>>8, op_7b>>8, op_7c>>8, op_7d>>8, op_7e>>8, op_7f>>8
defb op_80>>8, op_81>>8, op_82>>8, op_83>>8, op_84>>8, op_85>>8, op_86>>8, op_87>>8
defb op_88>>8, op_89>>8, op_8a>>8, op_8b>>8, op_8c>>8, op_8d>>8, op_8e>>8, op_8f>>8
defb op_90>>8, op_91>>8, op_92>>8, op_93>>8, op_94>>8, op_95>>8, op_96>>8, op_97>>8
defb op_98>>8, op_99>>8, op_9a>>8, op_9b>>8, op_9c>>8, op_9d>>8, op_9e>>8, op_9f>>8
defb op_a0>>8, op_a1>>8, op_a2>>8, op_a3>>8, op_a4>>8, op_a5>>8, op_a6>>8, op_a7>>8
defb op_a8>>8, op_a9>>8, op_aa>>8, op_ab>>8, op_ac>>8, op_ad>>8, op_ae>>8, op_af>>8
defb op_b0>>8, op_b1>>8, op_b2>>8, op_b3>>8, op_b4>>8, op_b5>>8, op_b6>>8, op_b7>>8
defb op_b8>>8, op_b9>>8, op_ba>>8, op_bb>>8, op_bc>>8, op_bd>>8, op_be>>8, op_bf>>8
defb op_c0>>8, op_c1>>8, op_c2>>8, op_c3>>8, op_c4>>8, op_c5>>8, op_c6>>8, op_c7>>8
defb op_c8>>8, op_c9>>8, op_ca>>8, op_cb>>8, op_cc>>8, op_cd>>8, op_ce>>8, op_cf>>8
defb op_d0>>8, op_d1>>8, op_d2>>8, op_d3>>8, op_d4>>8, op_d5>>8, op_d6>>8, op_d7>>8
defb op_d8>>8, op_d9>>8, op_da>>8, op_db>>8, op_dc>>8, op_dd>>8, op_de>>8, op_df>>8
defb op_e0>>8, op_e1>>8, op_e2>>8, op_e3>>8, op_e4>>8, op_e5>>8, op_e6>>8, op_e7>>8
defb op_e8>>8, op_e9>>8, op_ea>>8, op_eb>>8, op_ec>>8, op_ed>>8, op_ee>>8, op_ef>>8
defb op_f0>>8, op_f1>>8, op_f2>>8, op_f3>>8, op_f4>>8, op_f5>>8, op_f6>>8, op_f7>>8
defb op_f8>>8, op_f9>>8, op_fa>>8, op_fb>>8, op_fc>>8, op_fd>>8, op_fe>>8, op_ff>>8
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
defs -$\256 ; align to 256-byte boundary
; !"#$%&1()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]`abcdefghijklmnopqrstuvwxyz{|}~
font_data:
MDAT "font.bin"
mask_data: defb %00000011,%11111111
defb %11000000,%11111111
defb %11110000,%00111111
defb %11111100,%00001111
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
end: equ $
length: equ end-start
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Instruction implementations
INC "opimpl.inc"
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Woz Monitor ROM (&ff00-&ffff)
; May be overwritten by includes below
dump &ff00
MDAT "apple1.rom"
; Use RAM-based Applesoft BASIC by default
IF 1
; Applesoft BASIC [Lite] (6000-7FFF)
; http://cowgod.org/replica1/applesoft/
dump low_page,&6000
MDAT "applesoft-lite-0.4-ram.bin"
ELSE
; Lee Davidson's Enhanced BASIC (5800-77CE)
; http://members.lycos.co.uk/leeedavison/6502/ehbasic/
dump low_page,&5800
MDAT "ehbasic.bin"
ENDIF
; Use Ken Wessen's BASIC+assembler by default
IF 1
; Ken Wessen's custom BASIC + Krusader assembler + enhanced monitor (E000-FFFF)
; BRK handler points to mini-monitor in this version
; http://school.anhb.uwa.edu.au/personalpages/kwessen/apple1/Krusader.htm
dump &e000
MDAT "65C02.rom.bin"
ELSE
; Applesoft BASIC [Lite] + Woz monitor (E000-FFFF)
; http://cowgod.org/replica1/applesoft/
dump &e000
MDAT "applesoft-lite-0.4.bin"
ENDIF
; Test program to output the character set (5000-500B)
; LDX $00 ; loop: TXA ; JSR echo ; INX ; BRA loop
dump low_page,&5000
defb &a2, &00, &8a, &20, &ef, &ff, &e8, &80, &f9