c2t Documentation

AUTHOR

Egan Ford (egan@sense.net, datajerk@gmail.com)

DESCRIPTION

c2t is a command line tool that can convert binary code/data and/or Apple-1/II Monitor text, as well as 140K disk images, into audio files suitable for use with the Apple-1 and II (II, II+, //e) cassette interface.

c2t offers three high-speed options for the 64K Apple II+ and Apple //e:
8000 bps, 8820 bps, and 9600 bps. The c2t compression option may be used to speedup the delivery of data with all three as well as the native 1333 bps cassette interface ROM routines.

8820 bps (used to burn CDs) and 9600 bps are not compatible with all II+s and //es. If you plan to distribute your audio files, then use 8000 bps.
8820 bps and 1333 bps is not an option for disk images.

High-speed and compress options require c2t's custom loader, and at this time that limits you to a single segment. You can overcome this limitation by concatenating all your code together and creating your own code to shuffle your data around, or, pad each segment with enough zeros to align subsequent segments with their target address and then use the compress option to minimize this overhead.

Multi-segment audio files can be created for the Apple-1, II, II+, and //e that can be loaded using the standard cassette interface ROM routines.

WHY?

I created this because I needed a convenient way to get data loaded into my //e without dragging my computer out of my office (2nd floor) to my mancave (basement). IOW, I needed an iPhone/iPad/mobile solution. That, and CFFA3000 was sold out.

SYNOPSIS

Output of "c2t -h":

usage: c2t [-vh?] c2t [-elp] input[.mon],[addr] ... [output.mon] c2t {-1} [-cepr] input[.mon],[addr] ... [output.[aif[f]|wav[e]]] c2t {-2} [-abcdef8pmqr] input[.mon],[addr] ... [output.[aif[f]|wav[e]]] c2t [-n8] input.dsk ... [output.[aif[f]|wav[e]]]

    -1 or -2 for Apple I or II tape format
    -8 use 48k/8bit 8000 bps transfer (Apple II/II+/IIe 64K only)
       Implies -2a.  Negates -f and -d.
    -a assembly autoload and run (Apple II/II+/IIe 64K only)
    -b basic autoload and run (Apple II+/IIe 64K only)
       Implies -2a.
    -c compress data
    -d use fast 44.1k/16bit transfer (Apple II/II+/IIe 64K only)
       Implies -2a.  Negates -f and -8.  Use for burning CDs.
    -e pad with $00 to end on page boundary
    -f use faster 48k/8bit (9600 bps) transfer (Apple II/II+/IIe 64K only)
       Implies -2a.  Negates -8 and -d.  Unreliable on some systems.
    -h|? this help
    -l long monitor format (24 bytes/line)
    -m jump to monitor after autoload
    -n do not format disks
    -p pipe to stdout
    -q parameters and data only (for use with custom client)
    -r #, where # overrides the sample rate (e.g. -r 48000)
    -t 10 second preamble (default 4) for real tape use
    -v print version number and exit

input(s) without a .mon or .dsk extension is assumed to be a binary with a 4 byte header. If the header is missing then you must append ,load_address to each binary input missing a header, e.g. filename,800. The load address will be read as hex.

input(s) with a .mon extension expected input format:

    0280: A2 FF 9A 20 8C 02 20 4F
    0288: 03 4C 00 FF 20 9E 02 A9

A single input with a .dsk extension expected to be a 140K disk image.

output must have aiff, aif, wav, wave, or mon extention.

EXAMPLES

---

Input: Apple 1 monitor file with two segments. First 4 lines:

0: 00 05 00 10 00 00 00 00 8: 00 00 00 00 00 00 00 00 280: A9 00 85 07 A9 00 A8 AA 288: 85 06 A5 00 85 04 A5 01

Command:

c2t -1 a1mt.mon a1mt.aif

Output:

Reading a1mt.mon, type monitor, segment 1, start: 0x0000, length: 16 Reading a1mt.mon, type monitor, segment 2, start: 0x0280, length: 290

Writing a1mt.aif as Apple I formatted aiff.

To load up and run on your Apple I, type:

    C100R
    0.FR 280.3A1R 

---

Input: cc65/ca65 Apple II binary with DOS 4-byte header. The DOS header contains the starting address of the program.

Command:

c2t -2 hello hello.wav

Output:

Reading hello, type binary, segment 1, start: 0x0803, length: 2958

Writing hello.wav as Apple II formatted wave.

To load up and run on your Apple II, type:

    CALL -151
    803.1390R 
    803G

---

Input: cc65/ca65 Apple II binary with DOS 4-byte header. The DOS header contains the starting address of the program.

Command:

c2t hello hello.mon

Output:

Reading hello, type binary, segment 1, start: 0x0803, length: 2958

Writing hello.mon as Apple formatted monitor.

Example hello.mon output:

0803: A2 FF 9A 2C 81 0808: C0 2C 81 C0 A9 91 A0 13 0810: 85 9B 84 9C A9 91 A0 13 0818: 85 96 84 97 A9 00 A0 D4

---

Input: Binary game without DOS header that should be loaded at $801.

Command:

c2t -2 moon.patrol,801 moon.patrol.aif

Output:

Reading moon.patrol, type binary, segment 1, start: 0x0801, length: 18460

Writing moon.patrol.aif as Apple II formatted aiff.

To load up and run on your Apple II, type:

    CALL -151
    801.501CR 
    801G

---

Input: Binary game without DOS header that should be loaded at $801 as fast as possible while being compatible with all Apple IIs.

Command:

c2t -8c moon.patrol,801 moon.patrol.aif

Reading moon.patrol, type binary, segment 1, start: 0x0801, length: 18460

Writing moon.patrol.aif as Apple II formatted aiff.

start: 0x7226, length: 18393, deflated: 0.36%, data time:18.95, inflate time:6.83 WARNING: compression disabled: no significant gain (18.11)

To load up and run on your Apple II, type:

    LOAD

NOTE: Compression was disabled because it didn't help.

---

Input: Binary game without DOS header that should be loaded at $800 as fast as possible while being compatible with all Apple IIs.

Command:

c2t -8c super_puckman,800 super_puckman.wav

Reading super_puckman, type binary, segment 1, start: 0x0800, length: 30719

Writing super_puckman.wav as Apple II formatted wave.

start: 0x886C, length: 12691, deflated: 58.69%, data time:13.25, inflate time:5.79

To load up and run on your Apple II, type:

    LOAD

---

Input: Three binary files to be loaded at three different addresses.

c2t -2 foo,801 foo.obj,3ffd foo.pic,2000 foo.aif

Reading foo, type binary, segment 1, start: 0x0801, length: 91 Reading foo.obj, type binary, segment 2, start: 0x3FFD, length: 18947 Reading foo.pic, type binary, segment 3, start: 0x2000, length: 8192

Writing foo.aif as Apple II formatted aiff.

To load up and run on your Apple II, type:

    CALL -151
    801.85BR 3FFD.89FFR 2000.3FFFR 

---

Input: DOS 3.3 140K diskette image to be loaded with maximum II compatibility. Disk will be formatted first.

Command:

c2t -8 dos33.dsk dos33.wav

Output:

Reading dos33.dsk, type disk, segment 1, start: 0x1000, length: 28672 Reading dos33.dsk, type disk, segment 2, start: 0x1000, length: 28672 Reading dos33.dsk, type disk, segment 3, start: 0x1000, length: 28672 Reading dos33.dsk, type disk, segment 4, start: 0x1000, length: 28672 Reading dos33.dsk, type disk, segment 5, start: 0x1000, length: 28672

Writing dos33.wav as Apple II formatted wave.

Segment: 0, start: 0x459B, length: 19044, deflated: 33.58%, data time:19, inflate time:7.68 Segment: 1, start: 0x74A5, length: 7002, deflated: 75.58%, data time:7, inflate time:3.70 Segment: 2, start: 0x8514, length: 2795, deflated: 90.25%, data time:3, inflate time:2.28 Segment: 3, start: 0x6CD4, length: 9003, deflated: 68.60%, data time:9, inflate time:4.33 Segment: 4, start: 0x6DE6, length: 8729, deflated: 69.56%, data time:9, inflate time:4.27

To load up and run on your Apple II, type:

    LOAD

---