Apple2-IO-RPi/README.md

14 lines
1.4 KiB
Markdown
Raw Normal View History

2020-11-03 02:02:52 +00:00
# Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O
2020-11-03 02:46:28 +00:00
2020-11-17 00:25:02 +00:00
![Image of Board](/Hardware/Apple2IORPi.jpg)
2020-11-03 02:46:28 +00:00
## Project Status
2020-11-17 14:44:56 +00:00
This is a very early stage project. Currently one partially completed physical prototype exists that sends data unidirectional from the Raspberry Pi Zero W to the Apple II via 8 bit parallel data bus. The current design was reviewed and showed that the voltage divider resistors are wired incorrectly and they should be replaced anyway with a 74LVC245 to handle 3.3V and 5V level shifting. The schematics and PCB layout will be changing significantly over the coming weeks.
2020-11-03 02:46:28 +00:00
## Purpose
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This could be expanded to use the RPi for more complex processing as per request from the Apple II. For example, the Apple II could request a web page or application and the RPi could calculate this in Apple II hi-res graphics mode and send the image data back to the II for display purposes.
2020-11-03 02:46:28 +00:00
## Similar Project
If you're looking for complete hardware design or prefer having Apple II peripherals control a control a Raspberry Pi rather than simply using the Raspberry Pi to provide storage and network access to the Apple II, have a look at David Schmenk's excellent [Apple2Pi](https://github.com/dschmenk/apple2pi) project.